download english catalogue - o&o s.r.l

MOTION TECHNOLOGY

3

COMPANY

DAKOTA ELECTROMECHANICAL BOLLARDS RANGE DK/L APPROVED BOLLARDS DAKOTA BOLLARDS DEFENCE BOLLARDS DEFENDER STANDARD BOLLARDS EASY TOTEM ELECTRIC BOLLARDS COMMON ACCESSORIES

GAS, FIXED AND MANUAL BOLLARDS RANGE SCUDO SCUDO-G GAS BOLLARDS SCUDO-F FIXED BOLLARDS SCUDO-R COLLAPSIBLE BOLLARDS AUTOMATIC BARRIERS RANGE NIGHT&DAY 3,5 NIGHT&DAY DD3 NIGHT&DAY 6,8 COLORADO K UP & DOWN AUTOMATIC BARRIERS COMMON ACCESSORIES

INDUSTRIAL RANGE PL2 / PL2 PLUS AUTOMATIONS FOR HINGED FOLDING DOORS COSMO AUTOMATIONS FOR SECTIONAL DOORS HINGED FOLDING AND SECTIONAL DOORS COMMON ACCESSORIES RESIDENTIAL RANGE SLIDING GATE AUTOMATIONS SMART 400/600/800 MEGA-2000/230 Vac ZERO1/2500 kg SWING GATE AUTOMATIONS (EXTERNAL ENGINE) GEKO S/L ZERO 12 ZERO 2 FLUO S/L SWING GATE AUTOMATIONS (BURIED INSTALLATION) ZERO 14 230/24 Vac ZERO 4 SLIDING AND SWING AUTOMATIONS COMMON ACCESSORIES SECTIONAL AND UP AND OVER DOORS AUTOMATIONS ZERO 8 230 Vac TRAINER SECTIONAL AND UP AND OVER DOORS COMMON ACCESSORIES

ELECTRONICS CONTROL UNIT CONTROL UNIT ACCESSORIES

RADIOCONTROLS AND RECEIVERS 433 MHz DIP SWITCH 433 MHz ROLLING CODE 868 MHz ROLLING CODE

ACCESS CONTROL MANAGEMENT

COMMON ACCESSORIES PHOTOCELLS SELECTORS FLASHING LIGHTS POSTS FOR PHOTOCELL FLUSH MOUNTED MECHANICAL

GENERAL SALE TERMS

04

06081216182224

28303435

36384042464852

58606266

70

727475

76777879

808182

868788

929499

100102103104

106

108109110111112113

114

IND

EX

54

O&O has been in the market for more than 40 years and during that time it has become known the world over thanks to the combination of the two words: quality & safety, found in all the products it ma-nufactures and markets. O&O obtained the UNI EN ISO 9001-2000quality certifi cation in 2004.

O&O has managed to set up a world market thanks to the technical features of its products. In fact, due to continuous research and im-provement of each product, their products can work in any climate, acquiring a leading role in the professional automation sector.

In 2009 O&O became part of the French multinational corporation Somfy but it has retained its historical brand name and indepen-dence in controlling and organising its business while this merger has made it possible for O&O to offer an even more widespread service.Thanks to this collaboration, O&O is able to offer an even more complete range from motorway barriers to type approved bollards, from motorised guides for industrial doors to all types of residential motorisations.

We know we have the ideal solution for each problem.

CO

MPA

NY

APPROVAL

6 ELECTROMECHANICAL BOLLARDS RANGE DAKOTA

9

DK/500 L DK/700 L

Electromechanical bollards type approved with ministerial approval given by the Italian Ministry of In-frastructures and Works. Ideal for applications in the public sector.CDK dedicated unit that can be connected to at most 4 bollards simultaneously with deceleration at the end of travel both when moving up and down.

• Reed opening limit switch. • Crown of LED lights mounted on the top of the cylinder with built-in acoustic warning signal. • High reversibility, if there is a black out the cylinder tends to move down spontaneously.• Cataphoresis treated cylinder with reinforcement at the bottom for greater shock resistance. • Light casing and ground fl ange in cast iron.• IP67 protection level (NEMKO institute certifi cation).• Up to 1.500 manoeuvres in 24h.• KIT available.

DK

/L

DK/500 L DK/700 L

Supply voltageMoves down spontaneously in the case of a black-outExternal control unitAcoustic warning signal built into the light casing Heavy duty workMoving up timeProtection levelShock resistance in Joule*Breaking strength in Joule*Operating temperatureMovement with deceleration at the end of travel

230 Vac ±10% 50HzYESCDKYESYES6 sIP6710,500 J400.000 J-15° C + 60° CYES

230 Vac ±10% 50HzYESCDKYESYES9 sIP6710,500 J400.000 J-15° C + 60° CYES

2120

EA

SY

Ø 1

15-5

00

EA

SY

Ø 2

00-7

00

EA

SY

115-

500

EA

SY

200-

700

CYLINDER DIAMETER

CYLINDER HEIGHT

WORKING TIME

SHOCK RESISTANCE

Casing in cast iron with highly luminous LED lights.

200 mm

700 mm

9 s

10,000 J

CYLINDER DIAMETER

CYLINDER HEIGHT

WORKING TIME

SHOCK RESISTANCE

115 mm

500 mm

7 s

6,000 J

23

TOTE

M

Totem is a street cabinet suitable for the support and installation, in urban areas, means of con-trolling for bollards, barriers and any other device equipped with fi ttings for attachment to DIN rail. Consists of one or two overlapping modules made of treatment cataphoresis steel and painted gray sable, able to withstand long corrosion weathering. The form below is suitable to house electrical equipment to manage the entire system.

The module above, however, has an aluminum front panel suitable for mounting of any accessory control like badge reader, dialer number, interphone and so on (no application on aluminum panel at our expense). It can also be fi tted with a panel suitable for the accommodation of a traffi c light, 3 lights approved.Elegant, functional and innovative design, the totem O&O appears to be a true subject of street furniture.

TOTEM upper module with modula allumi-nium pannel able to housing safety devi-ces, traffi c light and other accessoires.

TOTEM-SUP (cod. 394310)

TOTEM lower module able to housing up to two control unit and cable connec-tions.

TOTEM-INF (cod. 394300)

Complete TOTEM, composed of:Totem inf: lower totem module with steel plate and o&o inox plate.Totem sup: higher totem module with accessories predisposition aluminium plate.Totem ligh: 360° red/green led bandTotem dima: predisposition totem template.

FULL-TOTEM (cod. 394330)

TOTEM-INF FULL-TOTEMTOTEM-SUP

2524

ANTIF DKcod. 303285

DAKOTA Ø210-500 and Ø210-700 anti theft kit to install.

ANTIF DEF/7cod. 303692

DEFENDER Ø273-700 anti theft kit to install.

BATT-UScod. 303280

Electrical relay that, in case of black-out, mantains cylinder raised.

RES-RISC DK 230Vcod. 303275

Heater with thermal probe for extreme climates.

CEMcod. 394220

Unit equipped by emergency button (breack glass).

SOScod. 394200

Emergency veichle sirens detector. Automatically lowers bollard..

AC

CE

SS

OR

IES

MAK-2cod. 394056

2 channel metal masses detector with 230 Vac power socket.

SPIRA - PROcod. 394060

Professional magnetic loop for mass detector.

SEM-2L R-Vcod. 385250

Traffi c light 2 lights Ø 100 mm.

DIMAcod. 303289

DAKOTA predisposition template.

SEM-3L R-Vcod. 385255

Traffi c light 3 lights Ø 100 mm.

SPIRA - STDcod. 394062

Standard magnetic loop for mass detector.

AC

CE

SS

OR

IESCOMMON ACCESSORIES FOR ELECTROMECHANICAL BOLLARDS COMMON ACCESSORIES FOR ELECTROMECHANICAL BOLLARDS

2726

AC

CE

SS

OR

IES

FASCIA/ADSV 10 cod. 303293

H: 100 mm customized retro-refl ecting fi lm to apply on the bollard cylinder. Film skin process including.

COLOR PLUS D

COLOR D

RAL chart custom paint . Price for more than 6 bollards (each one).

RAL chart custom paint. Price up to 5 bollard (each one).

TOTEM LUCIcod. 394350

360° red and green led light TOTEM cap.

TOTEM DIMAcod. 394360

TOTEM template with wall fasteners.

TOTEM - PAN/SEMcod. 394380

2 or 3 light traffi c light pannel, prefi tted for TOTEM.

ANTIFIK DK

BATT - US

RES-RISC DK 230V

CEM

SOS

MAK-2

SPIRA

DIMA

SEM-2L R-V

SEM-2L R-V

TOTEM LUCI

TOTEM DIMA

TOTEM - PAN/SEM

ANTIFIK DEF/7

DK

-L

DK

/500

L

DK

/700

L

DA

KO

TA

DK

210

/500

DK

210

/700

DE

FEN

DE

R

DE

F 27

3-70

0

EA

SY

EA

SY

115

-500

EA

SY

200

-700

TO

TE

M

FASCIA /ADSV 10

available to be request at order time

AC

CE

SS

OR

IESCOMMON ACCESSORIES FOR ELECTROMECHANICAL BOLLARDS COMMON ACCESSORIES FOR ELECTROMECHANICAL BOLLARDS

28 GAS, FIXED AND MANUAL BOLLARDS RANGE “SCUDO”

31

FRA

KE

Y

SCUDO G Ø114-500 SCUDO G Ø210-500 SCUDO G Ø210-700

Mechanical bollard with gas spring, certifi ed for more than 100,000 manoeuvres, operable ma-nually by means of a dedicated release key French type.

• Ground fl ange and top casing in cast iron with superfi cial cataphoresis treatment. • Shock resistance equal to 30,000 Joule for the 500 mm high version and 8,000 Joule for the 700 mm high version.

SC

UD

OG

3332

G Ø

210

-500

FR

A IN

OX

G Ø

210

-500

FR

A V

ER

G Ø

114

-500

FR

A IN

OX

G Ø

114

-500

FR

A V

ER

G Ø

210-

700

FRA

INO

X

G Ø

210

-700

FR

A V

ER

SCUDO-G Ø114-500 FRA VERN (cod.303851)

SCUDO-G Ø114-500 FRA INOX (cod.303856) SCUDO-G Ø210-500 FRA INOX (cod.303886)

SCUDO-G Ø210-500 FRA VERN (cod.303891)

SC

UD

O G

SC

UD

O G

Mechanical bollard with gas spring, operable with a dedicated French-type triangular key.

colour grey RAL 7022.

114 mm

500 mm


AISI 304 stainless steel.

114 mm

500 mm


colour grey RAL 7022 and 100 mm high strip applied.

210 mm

500 mm



210 mm

500 mm

CYLINDER

CYLINDER DIAMETER

CYLINDER HEIGHT

CYLINDER

CYLINDER DIAMETER

CYLINDER HEIGHT



210 mm

700 mm



210 mm

700 mm

CYLINDER

CYLINDER DIAMETER

CYLINDER HEIGHT

CYLINDER

CYLINDER DIAMETER

CYLINDER HEIGHT

3534

SCUDO F

F Ø

219

-500

INO

X

F Ø

219

-500

VE

R

SC

UD

O R

KE

Y

SCUDO R

R Ø

115

-625

R Ø

115

-625

Fixed post bollard to anchor to the ground using the three holes on the collar.

• Cataphoresis treated cylinder.

SC

UD

OF

SCUDO F Ø219-500 INOX (cod. 303365) SCUDO F Ø219-700 INOX (cod.303305)

SCUDO F Ø 219-500 VER (cod.303370) SCUDO F Ø 219-700 VER (cod.303310)

COLLAPSIBLE BOLLARD Manual parking bollard with collapsible cylinder, grey RAL 7022.

• Manual release with a dedicated release key and equipped with a protective plastic casing; it is possible to have a wall-template with fasteners for installing.

SC

UD

O R

SCUDO-R Ø115-625 (cod. 303710)

CYLINDER

CYLINDER DIAMETER

CYLINDER HEIGHT


219 mm

500 mm


219 mm

700 mm


219 mm

500 mm


219 mm

700 mm

CYLINDER

CYLINDER DIAMETER

CYLINDER HEIGHT

CYLINDER

CYLINDER DIAMETER

CYLINDER HEIGHT

colour grey RAL 7022.

115 mm

625 mm

36 AUTOMATIC BARRIERS RANGE

39

NIGHT & DAY 3-5

NIG

HT

& D

AY

3-5

Automatic electromechanical barrier for heavy duty, complete with dedicated control unit.

ARX.246 for bars 3 to 5 m in length, opening time 1.7-3.8 s.

A fanned motor is housed inside coupled to a monolithic oil-lubricated reducer.

A safety microswitch is installed as a standard feature that inhibits controls when the hatch is

opened; it also has a “reverser” system that reverses bar direction if it bumps against something,

electromechanical limit stops already calibrated plus protective hands cap in black ABS.

• Suitable for the “electronic toll gate” function.

• Standard RAL3002 painting with “orange peel” fi nish.

• Up to 10,000 manoeuvres in 24h.

NIGHT & DAY 3

Supply voltage Hand manoeuvre inside the structure Control unit on boardHeavy duty workOpening time Safety against knocks by reversing direction in closingBar lengthProtection levelOperating temperatureSmooth movement with deceleration at the end of travelRed RAL 3002 orange-peel or colours upon request

230 Vac ±10% 50/60 HzYESARX.246YES1,7 sYESFrom 1,7 m to 3 mIP65-30 °C + 60 °CYESYES

NIGHT & DAY 5

230 Vac ±10% 50/60 HzYESARX.246YES3,8 sYESFrom 3,5 m to 5 mIP65-30 °C + 60 °CYESYES

41

NIGHT & DAY DD3

NIG

HT

& D

AY

DD

3

Automatic electromechanical barrier for heavy duty, complete with dedicated control unit.

ARX.246 for bars 3m in length, opening time 2,4 s.

A fanned motor is house inside coupled to a monolithic oil-lubricated reducer fi tted with a spon-

taneous opening device for whenever there is a black out.




• Suitable for the “electronic toll gate” function.

• Standard RAL3002 painting with “orange peel” effect.


NIGHT & DAY DD3

Supply voltageSpontaneous hand manoeuvre in the case of a black-outControl unit on boardHeavy duty workOpening time Safety against knocks by reversing direction in closingBar lengthProtection levelOperating temperatureSmooth movement with deceleration at the end of travelRed RAL 3002 orange-peel or colours upon request

230 Vac ±10% 50/60 HzYESARX.DD3YES1,7 sYESFrom 2,5 m to 3 mIP65-30 °C + 60 °CYESYES

43

NIGHT & DAY 6-8

NIG

HT

& D

AY

6-8

Automatic electromechanical barrier for heavy duty, complete with dedicated control unit,

ARX.246 for bars 4 to 8 m in length, opening time 8 s.

A fanned motor is housed inside coupled to a monolithic oil-lubricated reducer.






NIGHT & DAY 6

Supply voltage Hand manoeuvre inside the structure Control unit on boardHeavy duty work Opening time Safety against knocks by reversing direction in closingBar lengthProtection levelOperating temperatureSmooth movement with deceleration at the end of travelRed RAL 3002 orange-peel or colours upon request

230 Vac ±10% 50/60 HzYESARX.246YES8 sYESFrom 4 m to 6,4 mIP65-30 °C + 60 °CYESYES

NIGHT & DAY 8

230 Vac ±10% 50/60 HzYESARX.246YES8 sYESFrom 6,5 m to 8 mIP65-30 °C + 60 °CYESYES

45

NIG

HT

& D

AY 3

-5N

IGH

T &

DAY

DD

3

NIG

HT

& D

AY 8

NIG

HT

& D

AY 6

44

NIG

HT

&D

AY

Automatic barrier for bars up to no more than 3 m in leng-th. Opening time 1,7 s. Red RAL 3002 polyester orange-peel painted fi nish. Max 10,000 manoeuvres in 24h.

NIGHT & DAY 3 (cod. 320000) VERS INOX (cod. 320000-0X)

AISI 304 stainless steel extra charge available for NIGHT&DAY and COLORADO barriers.





NIGHT & DAY DD3 (cod. 320010) VERS INOX (cod. 320010-0X)


NIG

HT

&D

AY

Automatic barrier for bars up to 6,4 m with red RAL 3002 orange-peel polyester paint fi nish.



Automatic barrier for bars up to 8 m with red RAL 3002 orange-peel polyester paint fi nish.



47

COLORADO K4-K6

CO

LOR

AD

O

K4-

K6

Automatic electromechanical barrier for condominium service. Complete with control unit on bo-

ard, BSX-BR.

230 Vac gear reducer permanently lubricated with grease.

Its two-tone structure (grey RAL7035, red RAL3002) is cataphoresis treated with a polyester ther-

mosetting painted fi nish.

Pre-set for housing the key selector and photocell.

Top cover in thermoformed red coloured ABS.

The barrier has the “reverser” system which reverses bar direction if it bumps into something plus

a safety microswitch that inhibits the controls when the top cover is opened and with protective

hands cap in black ABS.


COLORADO K4

Supply voltage Hand manoeuvre outside the structure with a dedicated key Control unit on boardResidential serviceOpening time Safety against knocks by reversing direction in closingBar lengthProtection levelOperating temperatureSmooth movement with deceleration at the end of travelRed RAL 3002 orange-peel and grey RAL 7035

230 Vac ±10% 50 /60 HzYESBSX/BRYES7 sYESMax 4 mIP64-20 °C + 60 °CYESYES

COLORADO K6

230 Vac ±10% 50 /60 HzYESBSX/BRYES14 sYESMax 4 mIP64-20 °C + 60 °CYESYES

49

UP & DOWN

UP

& D

OW

N

Low voltage (24 Vdc) automatic electromechanical barrier for condominium service with control

unit on board, Mod. LOG-SB, equipped with an encoder system.

Internal gear reducer permanently lubricated with grease.

The optical encoder allows travel to be acquired by means of self-learning, with the possibility of

decelerating when approaching the end of the manoeuvre both in opening and closing.

Supplied with protective hands cap in black ABS.

• Direction is reversed if the bar bumps against something both in opening and closing.



UP & DOWN

Supply voltage Operating voltageHand manoeuvre outside the structure with a dedicated keyControl unit on boardResidential serviceOpening time Safety against knocks by reversing direction in closingBar lengthProtection levelOperating temperature Movement with electronic acceleration and decelerationColour red RAL 3002 orange-peel

230 Vac ± 10% 50 /60 Hz24 VdcYESLOG-SBYESFrom 3 s to 8 sYESFrom 2,50 m to 4 mIP64-20 °C + 60 °CYESYES

DK Ø210-500

51

DK Ø210-500

DK Ø210-500

50

CO

LOR

AD

O K

6

CO

LOR

AD

O K

4

UP

& D

OW

N

UP

& D

OW

N

For bars no longer than 4 m.Opening time 7s.

COLORADO K4 (cod. 321410)

For bars no longer than 6 m.Opening time 14 s.

COLORADO K6 (cod. 321610)

CO

LOR

AD

O4-

6

VERS INOX (cod. 321410-0X)


VERS INOX (cod. 321610-0X)


For bars up to 4 m.Opening time 3 ÷ 8 s.

UP & DOWN (cod. 321200)

UP

&

DO

WN

5352

RBTcod. 380795

Professional heater with thermal probe for extreme climates suitables on NIGHT&DAY barriers.

RR U&Dcod. 321940

Heater with thermal probe for extreme climates suitables on UP&DOWN barrier.

MAK-2cod. 394056

2 channel metal detector masses with 230 Vac power socket.

FS2 N&Dcod. 393000

Two additional limit-switch for NIGHT&DAY 3,5,DD3 barriers.

SPIRA-PROcod. 394060

Professional magnetic loop for mass detector.

SPIRA - STDcod. 394062

Standard magnetic loop for mass detector.

AC

CE

SS

OR

IES

FS2 N&D 6-8cod. 393014

Two additional limit-switch for NIGHT&DAY 6 / 8 barriers

FS2 K4/K6cod. 393013

Two additional limit-switch for COLORADO K4 / K6 barriers.

FS2 U&Dcod. 393015

Two additional limit-switch for UP&DOWN barrier.

DIMA U&Dcod. 321285

UP&DOWN zinc plated fastening template with walling fasteners.

BL-SMALL 25 (Available from June 2010)cod.323100

2,5 meters alluminium bar, small size profi le, with O&O stickers and rubber sheath applied. Supply without led lights.

BL-SMALL 30 (Available from June 2010)cod. 323101

3 meters alluminium bar, small size profi le, with O&O stickers and rubber sheath applied. Supply without led lights.

AC

CE

SS

OR

IESCOMMON ACCESSORIES FOR AUTOMATIC BARRIERS COMMON ACCESSORIES FOR AUTOMATIC BARRIERS

5554

BL-SMALL 50 (Available from June 2010)cod. 323103

5 meters alluminium bar, small size profi le, with O&O stickers and rubber sheath applied. Supply without led lights

BL- LARGE 60 (Available from June 2010)cod. 323140

6 meters alluminium bar, round profi le Ø 92 mm, with O&O stickers and rubber shetah applied. Supply without led lights.

BL-SMALL 40 (Available from June 2010)cod.323102

4 meters alluminium bar, small size profi le, with O&O stickers and rubber sheath applied. Supply without led lights

EXT BL-LARGE 2 (Available from June 2010)cod. 323150

2 meters BL-LARGE 60 joint bar to get 8 m bar.

BL-SMALL SN (Available from June 2010)cod.323110

Articulated arm kit, already mounted, for BL-SMALL bars.

BL-SMALL FR (Available from June 2010)cod. 323120

Horizontal fracture arm system kit, already mounted, for BL-SMALL bars.

AC

CE

SS

OR

IES

KIT-LIGHT 3 (Available from June 2010)cod. 323200

Light bars kit to mount on for BL-SMALL bars up to 3 m.


Light bars kit to mount on for BL-SMALL bars up to 5 m.


Light bars kit to mount on for BL-LARGE bars up to 8 m.

RS/A (Available from June 2010)cod. 324020

Alluminium bar racket (red and anodized rods). Price per meter.

PP (Available from June 2010)cod. 324090

Movable boom rest rod.

KIT-LIGHT SN-3 (Available from June 2010)cod. 323205

Articulated arm light kit to mount for BL-SMALL SN bars up to 3 m.

AC

CE

SS

OR

IESCOMMON ACCESSORIES FOR AUTOMATIC BARRIERS COMMON ACCESSORIES FOR AUTOMATIC BARRIERS

5756

FM 100x40cod. 324060

Fixed bar rest fork.

FR 100x40cod. 324070

Regolable bar rest fork.

FR Ø100cod. 340080

Regolable bar rest fork for tubular bars BL-LARGE.

KIT-GOM 3 (Available from June 2010)cod. 323220

Red protection rubber Kit to mount for BL-SMALL bars up to 3 m.


Black protection rubber Kit to mount for BL-LARGE bars up to 8 m.


Red protection rubber Kit to mount for BL-SMALL bars up to 5 m.

KIT-LIGHT SN-5 (Available from June 2010)cod. 323206

Articulated arm light kit to mount for BL-SMALL SN bars up to 5 m.

AC

CE

SS

OR

IES

DIMA

BL-SMALL

BL-LARGE

RS/A

PP

NIG

HT

& D

AY

NIG

HT

& D

AY D

D3

NIG

HT

& D

AY 3

NIG

HT

& D

AY 5

NIG

HT

& D

AY 6

NIG

HT

& D

AY 8

CO

LOR

AD

O

CO

LOR

AD

O K

4

CO

LOR

AD

O K

6

UP

& D

OW

N

UP

& D

OW

N

FR

RBT

MAK-2

SPIRA-PRO

FS2

RR U&D

BL-SN

BL-FR

KIT-GOM

KIT-LIGHT

SPIRA STD

avai

lab

leto

be

req

uest

at

ord

er t

ime

COLOR PLUS-Bcod. 324426

COLOR-Bcod. 324425

RAL chart custom paint. Price for more than 6 barriers (each one).

RAL chart custom paint. Price up to 5 barriers (each one).

COMMON ACCESSORIES FOR AUTOMATIC BARRIERS COMMON ACCESSORIES FOR AUTOMATIC BARRIERS

58 INDUSTRIAL RANGE

61

PL 2/PL 2-R PLUS 180°

PL2

PL2

PLU

S

230 Vac irreversible electromechanical gear reducer for hinged folding doors.

Intermittent duty S3.

• Dedicated control unit, DEC-BT or BTX.

• Die-cast aluminium casing with permanent grease lubrication.

• Built-in electromechanical limit stops and ‘reverser’ safety device for detecting obstacles.

• Release with return by means of a steel cable or nylon rope system.

• Maximum leaf dimensions : 1.5 m x 6 m just the one model for both the right and left leaf.

PL2-R 90°

Supply voltageIrreversible mechanicsWorking timeMaximum door dimensionsSafety against knocks thanks to an electronic clutchMovement reversal with ReverserSemi-heavy duty workEmergency hand manoeuvre with a handle operated cableOpening angleExternal control unitProtection levelOperating temperature

230 Vac ±10% 50 HzYES~15 s36 m²YESYESYESYES90°BTX or DEC-BTIP30-15 °C + 60 °C

PL2-R PLUS 180°

230 Vac ±10% 50 HzYES~25 s36 m²YESYESYESYES180°BTX or DEC-BTIP30-15 °C + 60 °C

63

COSMO

CO

SM

O

Irreversible electromechanical gear reducer for industrial type sectional doors with built-in adju-

stable limit switches.

• Dedicated control unit DEC-SM model.

• For sectional doors, from 18 - 40 m².

• Chain or direct emergency release.

• Semi-heavy or heavy duty depending on the version, 230 Vac or 400 Vac.

COSMO C

Supply voltageIrreversible mechanicsMaximum torqueMaximum door weightSafety against knocks thanks to a mechanical ribHeavy duty workEmergency manoeuvre with chain releaseControl unitProtection levelOperating temperature

230 Vac ±10% 50/60 HzYES45 Nm~250 kg = 18 m²YESYESYESDEC-SMIP20-15 °C + 60 °C

COSMO SB COSMO SC

Supply voltageIrreversible mechanicMaximum torqueMaximum door weightSafety against knocks thanks to a mechanical ribHeavy duty workEmergency manoeuvre with chain releaseControl unitProtection levelOperating temperature

230 Vac ± 10% 50/60 HzYES45 Nm~700 kg = 40 m² YESYESYESDEC-STIP20-15 °C + 60 °C

400 Vac ± 10% 50/60 HzYES65 Nm ~700 kg = 40 m² YESYESYESDEC-STIP20-15 °C + 60 °C

DK Ø210-500

DK Ø210-500

65

DK Ø210-500

DK Ø210-500

64

COSMO

PL 2-R PLUS 180°PL 2 R-90°

CO

SM

O

230 Vac irreversible gear reducer (excluding the telescopic arm) for hinged doors with leaf opening 90° and the “reverser” safety system installed.

230 Vac irreversible gear reducer (excluding the telescopic arm) for hinged doors with leaf opening 90° / 180° and the “reverser” safety system installed.

PL2

PL2

PLU

S

PL2-R 90° (cod. 308410)

PL2-R PLUS 180° (cod. 308440)

CO

SM

O

230 Vac gear reducer for sectional doors up to 18 m² (250 kg) with emergency winch release. Maxi-mum opening speed 22 rpm, maximum torque 45 Nm. Semi-heavy duty.

230 Vac gear reducer for sectional doors up to 18 m² (250 kg) with direct emergency release. Maximum opening spe-ed 22 rpm, maximum torque 45 Nm. Semi-heavy duty.

400 Vac gear reducer for sectional doors up to 40 m² (700 kg) with direct emergency release. Maximum opening speed 33 rpm, maximum torque 65 Nm. Semi-heavy duty.

COSMO C (cod. 307500) COSMO SB (cod. 307502)

COSMO SC (cod. 307504)

6766

SPRO-12cod. 307710

Z = 12 pinion gear kit for 1/2” x 5/16” chain.

SPRO-14cod. 307711


SPRO-18cod. 307712


CORO-30cod. 307720

Z30 crown wheel assembly sectional door shafts with 2 m chain.

SPRO-30cod. 307713

Z30 pinion gear kit for 1/2” x 5/16” chain.

CORO-40cod. 307721

Z40 crown wheel assembly sectional door shafts with 2 m chain.

AC

CE

SS

OR

IES

CH-5cod. 307730

5 m chain blister for COSMO-C motors.

CH-8cod. 307731

8 m chain blister for COSMO-C motors.

Fixed manual relese.

Remote manual relese by rope.

Remote manual relese with lever release device.

MAN-FISSA PL2-PL2 PLUScod. 308927

MAN A FUNE PL2 PLUScod. 308590

MAN A FUNEcod. 309210

I-MANcod. 382100

Hold-to-run control board without limit switch. Works by interlocked push-button panel PT2-I A/C.

AC

CE

SS

OR

IESCOMMON ACCESSORIES FOR INDUSTRIAL DOORS COMMON ACCESSORIES FOR INDUSTRIAL DOORS

6968

PL

2

TSM-3P X DECcod. 381050

Membrane keyboard applied on frontal control unit cover with OPEN-STOP-CLOSE functions

PT2-I A/Ccod. 390300

Industrial interlocked two push-buttons panel. OPEN-CLOSE fun-ctions

PT3 A-S-Ccod. 390310

Industrial interlocked three push-buttons panel. OPEN-STOP-CLOSE functions.

AC

CE

SS

OR

IES

PL2

PL2

-90°

/180

°

PL2

-R 9

0°/1

80°

PL2

-PLU

S 9

0°/1

80°

PL2

-R P

LUS

90°/

180°

CO

SM

O

CO

SM

O-C

CO

SM

O-S

B

CO

SM

O-S

C

CH

SPRO-12

CORO-40

MAN-FISSA PL2-PL2 PLUS

MAN A FUNE PL2 PLUS

MAN A FUNE PL2

TSM-3P X DEC

I-MAN

PT2-I A/C

PT3 A-S-C


AC

CE

SS

OR

IESCOMMON ACCESSORIES FOR INDUSTRIAL DOORS COMMON ACCESSORIES FOR INDUSTRIAL DOORS

RESIDENTIAL RANGE

7372

SMART

SM

AR

T

SMART

230 Vac irreversible electromechanical gear reducer for sliding gates up to 800 kg or in the 24Vdc

version with magnetic encoder for 400 to 600 kg sliding gates.

• Adjustable electronic clutch for residential service.

• Base in die-cast aluminium and cover in injection moulded polypropylene, equipped with a

dedicated control unit on board, Mod. DEC-SC 230 Vac version, LOG-SC 24Vac version, electro-

mechanical limit stops (230Vac version) and manual emergency release with numbered key.

• Complete with wall-mounting plate that can be horizontally and vertically adjusted.

Available from May 2010

SMART 400

Supply voltage MotorIrreversible mechanics in permanent greaseGate speedMaximum gate weightElectromechanical limit stopHand manoeuvre with a customised keySafety against knocks and reversal of directionby means of Residential serviceControl unit on board24V battery on boardProtection level Operating temperature

230 Vac ±10% 50/60 Hz24 VdcYES13,5 m/min400 kgNOYES

ENCODERYESLOG-SBYESIP65-15 °C + 60 °C

SMART 600 SMART 800

230 Vac ±10% 50/60 Hz24 VdcYES12 m/min600 kgNOYES

ENCODERYESLOG-SBYESIP65-15 °C + 60 °C

230 Vac ±10% 50/60 Hz230 VdcYES8,5 m/min800 kgYESYES

REVERSERYESDEC-SBNOIP65-15 °C + 60 °C

SM

AR

T

AUTOMATISMS FOR SWINGING GATES

SMART - 400 (cod.306860)

SMART - 600 (cod.306870)

SMART - 800 (cod.306820)

24 Vac electromechanical gear reducer for sliding gates up to 400 kg.

24 Vac electromechanical gear reducer for sli-ding gates up to 600 kg.

230 Vac electromechanical gear reducer for sli-ding gates up to 800 kg.

SM

AR

T

SMART

7574

MEGA 2000

ZEROUNO

MEGA 2000

Supply voltage Irreversible oil-bath mechanicsGate speedMaximum gate weightElectromechanical limit stopManual manoeuvre by means of a knob with customised release key.Safety against knocks thanks to an adjustable mechanical clutch Heavy duty workControl unit on boardProtection levelOperating temperature

230 Vac ±10% 50/60 HzYES9 m/min 1500 kgYESYESYESYESDEC-SCIP53-15 °C + 60 °C

230 Vac irreversible electromechanical oil-bath gear reducer with adjustable mechanical clutch

for sliding gates weighing up to 2.000 Kg.

• Heavy duty.

• Control unit installed on the motor, DEC-SC and electromechanical limit stops.

• Receiver on board.

• Manual emergency manoeuvre by means of a knob with customised release key.

Available from June 2010

MEGA 2000 (cod.306910) 230 Vac electromechanical oil-bath gear reducer for sli-ding gates up to 2.000 kg.

ME

GA

200

0


ZE

RO

UN

O

Electromechanical oil-bath gear reducer, 230 Vac and 400 Vac for sliding gates up to 2.500 kg

for heavy duty.

• Dedicated control unit, DEC-SM, DEC-ST.

• Equipped with magnetic limit stops with IP67 protection level, manual emergency release with

key supplied as a standard feature.

• Motor package complete with fi xing plate and fasteners.

MEGA 2000


ZEROUNO-M-CH 2500 Kg

Supply voltageIrreversible oil-bath mechanicsMaximum gate weightGate speedMagnetic limit stopsHand manoeuvre with a customised keySafety against knocks thanks to an adjustable mechanical clutch Heavy duty work Control unit not on boardProtection levelOperating temperature

230 Vac ±10% 50/60 Hz YES2500 kg 10 m/min YESYESYESYESDEC-SM IP66 -30 °C + 60 °C

ZEROUNO-M-CH (cod. 305215) 230 Vac irreversible monophase gear reducer, release with numbered key

ZEROUNO

7776

GEKO S/L

ZERO12

GE

KO

GEKO-S

Supply voltage MotorCylinder strokeWorking timeMaximum opening angleMaximum leaf dimensionsIrreversible mechanicsSafety against knocks and reversal of direction Heavy duty workControl unit not on boardProtection levelOperating temperatureHand manoeuvre with the release key supplied

230 Vac ±10% 50/60 Hz24 Vdc305 mm15 s120°1,8 mYESYESYESLOG-GKIP64-20 °C + 50 °CYES

GEKO-L

230 Vac ±10% 50/60 Hz24 Vdc410 mm18 s120°5 mYESYESYESLOG-GKIP64-20 °C + 50 °CYES

GEKO-S (cod.301100)

GEKO-L (cod.301105)

Actuator for swinging gates with leafs up to 2 m. 305 mm cylinder travel.

Actuator for swinging gates with leafs up to 5 m. 410 mm cylinder travel.

24 Vac low voltage irreversible electromechanical actuator.

• For gates with swinging leafs up to 5 m.

• Equipped with a dedicated control unit, LOG-GK with magnetic limit stops and anti-crushing

system which, in the case of knocks, allows reversal of direction, preventing injury to people and

damage to things.

• Emergency manoeuvre with dedicated key supplied as a standard feature.

Available from June 2010


ZE

RO

12

230 Vac electromechanical gear reducer for residential service, available in the irreversible and

reversible versions with encoder.


• For leafs up to 2.5 m.

• Modern, eyecatching design in anodised aluminium, emergency release with a numbered key.

ZERO12 / BV - ZERO12 / RV

Voltage Cylinder strokeWorking timeMaximum opening angleMaximum leaf dimensionsMechanicsSafety against knocks thanks to an electronic clutchDirection reversal with encoderResidential serviceControl unit not on board BTXControl unit not on board DEC-BTProtection level Operating temperature Hand manoeuvre with a customised key

230 Vac ±10% 50Hz320 mm20 s110°2,5 mREVERSIBLEYESNOYESYESYESIP65-15 °C + 60 °CYES

ZERO12/B-V (cod. 301600)

ZERO12/R-V (cod. 301650)

ZERO12/B-V-E (cod. 301610)

230 Vac irreversible gear reducer for leafs up to 2.5 m.

230 Vac reversible gear reducer for leafs up to 2.5 m.

230 Vac irreversible gear reducer for leafs up to 2.5 m with encode.r

ZERO12/R-V-E (cod. 301660) 230 Vac reversible gear reducer for leafs up to 2.5 m with encoder.

ZERO12 / B-V-E - ZERO12 / R-V-E

230 Vac ±10% 50Hz320 mm30 s110°4 mIRREVERSIBLE /REVERSIBLEYESYESYESNOYESIP65-15 °C + 60 °CNO / YES


GEKO S/L

ZERO 12

7978

ZERODUE

FLUO S/L

ZE

RO

2

230Vac reversible electromechanical oil-bath gear reducer for swinging gates with leafs up to 8 m for heavy duty.

Dedicated control unit, DEC-BT.

• High quality internal mechanics with motion transmitted by SKF recirculating balls.

• Adjustable mechanical clutch, pre-set for electric parking brake equipped with release key for emergency manoeuvres.

• 120° maximum opening.

• Chromo-phosphating treatment and polyester powder painted fi nish on the motor body.

ZERO2 - S

VoltageTransmission by means of a recirculating ball screwCylinder strokeWorking timeMaximum opening angleMaximum leaf dimensionsReversible oil-bath mechanicsIrreversibility obtained with an electric brake on boardStopping when the gate bumps against an obstacle thanks to an adjustable mechanical clutchHeavy duty workControl unit not on boardProtection levelOperating temperature Hand manoeuvre with the key supplied

300 mm36 s

4 m

ZERO2/V (cod. 300230)

ZERO2/S (cod. 300200)

230Vac reversible gear reducer in oil for leafs up to 3 m, 300 mm cylinder travel

230Vac reversible gear reducer in oil for leafs up to 4 m, 300 mm cylinder travel

ZERO2/SL (cod. 300210) 230Vac reversible gear reducer in oil for leafs up to 5 m, 400 mm cylinder travel

230Va.c. ± 10% 50/60 Hz

ZERO2 - V ZERO2 - SL

300 mm26 s

3 m

400 mm48 s

5 mYESYES

YESYES

BTX - DEC-BTIP67

-30 °C + 60 °CYES

ZERO2 - XL

400 mm69 s

8 m

120°

ZERO2/XL (cod. 300260) 230Vac reversible gear reducer in oil for leafs up to 8 m, 400 mm cylinder travel

YES


FLU

O

24Vac low voltage hydraulic gear reducer and with lock.

• For gates with swinging leafs up to 5m for heavy duty.

• Equipped with an absolute encoder, anti-crushing system; decelerating at the end of both opening and

closing is possible thanks to self-learning with a dedicated control unit LOG-FL.

Available from May 2010

FLUO S

Supply voltageMotorCylinder strokeWorking timeMaximum opening angleMaximum leaf dimensionsReversibile mechanicsSafety against knocks thanks to an electronic clutchHeavy duty workControl unit not on boardProtection levelOperating temperatureHand manoeuvre with the key supplied

230Va.c. ± 10% 50/60 Hz 24Vd.c.270 mm17s120°2 mYESYESYESLOG-FL IP55 -20°C + 60°CYES

FLUO-S (cod. 301200)

FLUO-L (cod. 301205)

Reversible hydraulic gear reducer for leafs up to 2m (300Kg), 270 mm cylinder travel, opening time 17s.

Hydraulic gear reducer with lock for leafs up to 5m (800Kg), 390 mm cylinder travel, opening time 35s.

FLUO L

230Va.c. ± 10% 50/60 Hz 24Vd.c.392 mm19s120°5 mYESYESYESLOG-FL IP55 -20°C + 60°CYES

AUTOMATISMS FOR SWINGING GATES (HYDRAULIC)

ZERO 2

FLUO

8180

ZERO14

ZERO4

CFC-04

Electromechanical gear reducer for buried installation, in the 230 Vac and 24 Vdc versions for

swinging gates with leafs up to 3.5 m for residential service.

• Dedicated control unit, DEC-BT or BTX for the 230 Vac version; LOG-GK for the 24 Vdc ver-

sion.

• The unit is completely watertight to dipping, IP67.

• Deceleration of motion by means of lever mechanisms, mechanical opening and closing limit

stops incorporated in the motor.

• Maximum opening 120° or 180° with additional levers.

• Emergency release on the leaf.

ZERO14-230V - S

Supply voltageMotorIrreversible mechanics in permanent greaseMaximum leaf dimensionsMaximum opening angleWorking timeSafety against knocks thanks to an adjustable electronic clutchDirection reversalProtection levelResidential serviceControl unit not on boardOperating temperatureLevers for opening 180°Hand manoeuvre by means of a dedicated key

230 Vac ±10% 50 Hz24 VdcYES3,5 m120°28 sYESNOIP67YESBTX or DEC-BT-20 °C + 50 °CYESYES

ZERO14 230V (cod. 302300)

ZERO14 24V (cod. 302305)

CF-014 (cod. 302350)

230 Vac irreversible gear reducer for buri-ed installation.

24 Vdc irreversible gear reducer for buried in-stallation.

Foundation box in cataphoresis steel with lid, transmission lever mechanisms and release lever.

CF-014 INOX (cod. 302360) Foundation box in stainless steel with lid, tran-smission lever mechanisms and release lever.

ZERO14-24V - VL

LEVE 180° 014 (cod. 302310) Kit of levers for opening 180°.

230 Vac ±10% 50/60 Hz24 VdcYES3,5 m120°15 sYESYESIP67YESLOG-GK-20 °C + 50 °CNOYES

ZE

RO

14


ZE

RO

4

230 Vac irreversible electromechanical oil-bath gear reducer for buried installation for swinging

gates with leafs up to 2.5 m for heavy duty.


• High quality internal mechanics, deceleration of motion by means of lever mechanisms, adju-

stable mechanical clutch.

• Completely waterproof to dipping, IP67, the gear reducer undergoes a cataphoresis treatment

to protect against corrosion. 110° maximum opening.

ZERO 4

Supply voltageIrreversible oil-bath mechanicsMaximum leaf dimensionsMaximum opening angleWorking timeSafety against knocks thanks to a mechanical clutchProtection levelHeavy duty work Operating temperatureHand manoeuvre by means of a dedicated key Control unit not on board

230 Vac ±10% 50 Hz YES2,5 m; 300 kg 110°15 s YESIP67YES-30 °C + 60 °C YESBTX or DEC-BT

ZEROQUATTRO (cod. 302200)

CFC-04 (cod. 304100)

230 Vac irreversible gear reducer in oil for buri-ed installation.

Foundation box with lid, lever mechanisms for transmission and release lever.


ZERO 14

ZEROUNO

82 83

CR/Z 30x12cod. 309040

Galavanized steel rack 30x12 mm module 4. One meter pieces.

CR/Z 30x20cod. 309060

Galavanized steel rack 30x12 mm module 4. One meter pieces.

CR/NYLONcod. 309080

Nylon rack module 4. One meter pieces.

CMC 1,7cod. 386217

Safety mechanical rib 1,7 m (certifi ed EN 954 - cat. 2,3).

CMC 1,5cod. 386215


CMC 2cod. 386220

Safety mechanical rib 2 m (certifi ed EN 954 - cat. 2,3).

AC

CE

SS

OR

IES COMMON ACCESSORIES FOR SLIDING AND SWINGING GATES

CMC 2,5cod. 386225


EF 230Vcod. 304050

Electrobracke lock doors available on all ZERO2 models (to be re-quest at ZERO2 motor order time).

868,90 Mhz radio receiver for safety mechanical rib CMC.

24 Vac battery plug kit for sliding gates.

868,90 Mhz radio transmitter for safety mechanical rib CMC

24 Vac battery plug kit for swing gates.

RADIOBAND-Rcod. 386280

RADIOBAND-Tcod. 386290

KIT-BATT-SCcod. 306892

KIT-BATT-BTcod. 381870

AC

CE

SS

OR

IESCOMMON ACCESSORIES FOR SLIDING AND SWINGING GATES

24V 24V

24V

24V

8584

ELS-DXcod. 309600

12 Vac horizontal right side electric lock.

ELS-SXcod. 309610

12 Vac horizontal left side electric lock.

ELS-PVcod. 309620

12 Vac fl oor electrical lock.

12/24 Vdc electric lock card for 24 Vac automations .

LOCK-BTcod. 381871

AC

CE

SS

OR

IES COMMON ACCESSORIES FOR SLIDING AND SWINGING GATES

SM

AR

T

ZE

RO

3

ME

GA

-200

0

ZE

RO

1

GE

KO

S/L

ZE

RO

12

ZE

RO

2

FLU

O S

/L

ZE

RO

14

ZE

RO

4

CR/Z 30x12

CR/Z 30x20

CR/NYLON

CMC 1,7

CMC 1,5

CMC 2

CMC 2,5

EF 230V

RADIOBAND-R

RADIOBAND-T

KIT-BATT-SC

LOCK-BT

ELS-DX

ELS-SX

ELS-PV

KIT-BATT-BT


AC

CE

SS

OR

IESCOMMON ACCESSORIES FOR SLIDING AND SWINGING GATES

8786

ZERO8

TRAINER

ZERO8-L-CV-R

Supply voltageWorking timeIrreversible mechanics in permanent greaseSafety against knocks by means of an electronic clutch Movement reversal with Reverser*Residential serviceEmergency hand manoeuvre accessible both from inside and outsideIntegrated courtesy lightBSX-BL control unitProtection levelOperating temperature

15 sYESYESNOYESYES

YESOn board

ZERO8-L-CV-R (cod. 308205)

ZERO8-L-CS-R (cod. 308215)

ZERO8-L-V (cod. 308250)

230 Vac irreversible gear reducer with built-in control unit* and ‘reverser’. Opening time 15 s.

230 Vac irreversible reduced speed gear reducer with built-in control unit* and ‘reverser’. Opening time 23 s.

230 Vac irreversible gear reducer without con-trol unit. Opening time 15s.

ZERO8-L-S (cod. 308260) 230 Vac irreversible reduced speed gear redu-cer without control unit. Opening time 23 s.

ZERO8-L-CS-R ZERO8-L-V ZERO8-L-S

23 sYESYESNOYESYES

YESOn board

15 sYESYESNOYESYES

YESNot on board

23 sYESYESNOYESYES

YESNot on board

230 Vac ±10% 50/60 Hz

IP30-10 °C + 60 °C

ZE

RO

8

230 Vac irreversible electromechanical gear reducer for counter-

weighted up and over doors up to 8m² (12 m² with 2 motors) for

residential service

• Built-in control unit BSX-BL.

• Opening time 15 - 23 s.

• With an integral cover and courtesy light, built-in mechanical limit

stops and ‘reverser’ safety device that detects obstacles.

• Releasing possible in the case of an emergency both from inside

and outside.

• Equipped with a motor bracket for fi xing to the up and over

door.

AUTOMATISMS FOR COUNTERWEIGHTED UP AND OVER DOORS

TRA

INE

R

24 Vdc electromechanical gear reducer with chain transmission for sectional doors and spring up-and-over doors for residential service.

• Built-in control unit.

• Opening time 28 s.

• Encoder controlled limit switch by self-learning the required travel, with mechanical stop in opening.

• Anti-crushing system.

• 600 N (60 kg) and 1,200 N (120 kg) versions.

TRAINER 60

Supply voltage Operating voltageIrreversible mechanicsTraction force in kgWorking timeUp and over surface in m²Safety against knocks by reversal of direction Encoder* Condominium serviceEmergency hand manoeuvre with a handle operated cableIntegrated courtesy lightControl unit with self-learning on boardProtection level Operating temperature

230 Vac ±10% 50/60 Hz 24 VdcYES6028 s8YESYESYESYESYESIP30-15 °C + 60 °C

TRAINER-60 (cod. 311311)

TRAINER-120 (cod. 311312)

24V, 600 N (60 Kg) gear reducer.

24V,1200 N (120 Kg) gear reducer.

TRAINER 120

230 Vac ±10% 50/60 Hz 24 VdcYES12028 s13YESYESYESYESYESIP30-15 °C + 60 °C

AUTOMATISMS FOR UP AND OVER AND SECTIONAL DOORS

ZERO 8

TRAINER

8988

MAN-08-CHcod. 308930

External sliding manually operated kit with hexagonal key for drive.

MAN-08cod. 308935

Manually operated kit to apply on external lock handle, normaly installed on coat.

KF2cod. 308950

2 supplemtar limit-switches, with cams and cable connection.

PT-Mcod. 308955

Galvanized sheet metal engine support H = 620 mm.

PULS-08cod. 308944

START-STOP buttons with cable connection to install on engine cover.

PT-XL MULTIFOROcod. 308966

Galvanized sheet metal drilled engine support H =1700 mm.

AC

CE

SS

OR

IES COMMON ACCESSORIES FOR COUNTERWEIGHTED UP

AND OVER AND SECTIONAL DOORS

BR-08-D-Lcod. 308971

L = 200 mm right arms for two ZERO8 motors side installation. For tipping doors from 8 m² to 12 m²

BR-08-D-Ccod. 308972

L = 1500 mm right arms for one ZERO8 central side installation. For tipping doors up to 8.

L = 200 mm curved arms for two ZERO8 side installation. For tipping doors 8 m² a 12 m².

Frontal attachment for sectional leaf.

L = 1500 mm curved arms for one ZERO8 central installation. For tipping doors up to 8 m².

Curved arm kit for balance weight tipping doors.

BR-08-C-Lcod. 308973

BR-08-C-Ccod. 308974

ATT/FR-TRcod. 311430

BC/BAS-TRcod. 311450

AC

CE

SS

OR

IESCOMMON ACCESSORIES FOR COUNTERWEIGHTED UP


9190

SP-TRcod. 311480

Additional wall support kit fot TRAINER guide.

MAN/EST-TRcod. 311420

External unlock kit by rope and key lock.

SBL/SEZcod. 311460

External handle unlock kit for sectional leaf.

G/CAT 3mtcod. 311306

3 m H = 2,15 m sectional doors drive and H = 2,4 m tipping doors drive.

SBL/BAScod. 311470

External handle unlock kit for tipping doors.

G/CAT 4mtcod. 311307

4 m H = 3,15 m sectional doors drive and H = 3,4 m tipping doors drive.

AC

CE

SS

OR

IES COMMON ACCESSORIES FOR COUNTERWEIGHTED UP


ZE

RO

8

TR

AIN

ER

60

TR

AIN

ER

120

MAN-08-CH

MAN-08

KF2

PT-M

PULS-08

PT-XL MULTIFORO

BR-08-D-L

BR-08-D-C

BR-08-C-L

BR-08-C-C

ATT/FR-TR

BC/BAS-TR

SP-TR

MAN/EST-TR

SBL/SEZ

G/CAT 3 m

SBL/BAS

G/CAT 4 m


AC

CE

SS

OR

IESCOMMON ACCESSORIES FOR COUNTERWEIGHTED UP


92 ELECTRONICS

9594

Control unit for a single-phase ZEROUNO, COSMO C and COSMO SB motor, 230V 50-60 Hz.Automatic – semi-automatic – hold-to-run operation.Flexible and simple to programme thanks to opting for dip-switch logic and trimmer timer adjustment.Safe and practical to service thanks to the input status diagnostic LEDs as well as electronic clutch and photocell self-testing.It features electrical braking when the limit switches are reached which is useful for gates with particular inertia and weight.Can be controlled via the new membrane keypad to be attached to the cover, TSM -3P.

Control unit for a three-phase/single-phase ZEROUNO and COSMO SC motor, 400V and 230V 50-60 Hz.Automatic – semi-automatic – hold-to-run operation.Flexible and simple to programme thanks to opting for dip-switch logic and trimmer timer adjustment.Safe and practical to service thanks to the input status diagnostic LEDs and electronic clutch and photocell self-testing.It has interlocked contactors, type-approved for three-phase loads and a set of three ceramic fuses for internal protection against overloads.Trimmer adjustable separate controls for Open – Close – Start – Open pedestrian.Plug-in input for quick connection to the limit switches and reverser with an O&O prewired cable.Can be controlled via the new membrane keypad to be attached to the cover, TSM -3P.

Control unit for one or two single-phase motors, 230V 50Hz.Recommended combinations: ZERO 2, ZERO4, ZERO12, ZERO14, PL2, PL2 PLUS.Automatic – semi-automatic – hold-to-run operation.Self-learning programming of working time or with an encoder using the SF2M card for ZERO 12-E motors.New system for adjusting deceleration at the end of the manoeuvre, for motors suitable for use with swing gates, able to limit torque loss.Flexible and simple to programme thanks to opting for dip-switch logics.Safe and practical to service thanks to the input status diagnostic LEDs and electronic clutch and photocell self-testing.Can be controlled via the new membrane keypad to be attached to the cover, TSM -3P.

CO

NTR

OL

UN

IT

Functions card for 2 motors which add the following to the DEC-BT control unit: 4 limit switch inputs and 2 inputs for the reverser with anti-crushing function or 2 encoders with the Self-learning function for travel and deceleration spaces with anti-crushing control in opening and closing.

Single-phase control unit, 230V 50Hz, specifi c for controlling bollards: DAKOTA Ø210-500 / 700, DEFENDER, EASY Ø115-500, EASY Ø200-700Specifi c remote control logic for bollards stopping access to driveways. Automatic – semi-automatic – hold-to-run operation.Highly reliable and featuring selected, oversized components so it can be controlled under particularly heavy duty conditions and in extreme climates.4 bollards can be controlled simultaneously.Adjustable deceleration at the end of the manoeuvre. Adjustable automatic retracting time. A pre-blinking and acoustic warning time can be set before the bollard retracts.Outputs for controlling the acoustic warning signal installed on the Totem posts where en-visaged.Outputs for traffi c light control, heating elements, anti-theft.Input for emergency back-up anti Black-out BATT US.

Single-phase control unit, 230V 50Hz, specifi c for controlling type approved bollards DK/500L, DK/700 L suitable for installation in public and town areas. Highly reliable and featuring selected, oversized components so it can be controlled under particularly heavy duty conditions and in extreme climates.4 bollards can be controlled simultaneously.Adjustable deceleration at the end of the manoeuvre. Adjustable automatic retracting time. A pre-blinking and acoustic warning time can be set before the bollard retracts.Outputs for controlling the acoustic warning signal installed on the bollards and on the Totem posts where envisaged.

CO

NTR

OL

UN

IT

DEC-SM COD. 381200

DEC-ST COD. 381250

DEC-BT COD. 381450

SF-2M COD. 381490

CDK-US COD. 381760

CDK COD. 381720

9796

Control unit for one or two single-phase motors, 230V 50Hz.

• Recommended combinations: ZERO 2, ZERO4, ZERO12, ZERO14, PL2, PL2 PLUS.

• Automatic – semi-automatic – hold-to-run operation.

• Flexible and simple to programme thanks to opting for dip-switch logic and trimmer timer adjustment.

• Control of 2 reverser inputs to limit anti-crushing and reverse movement for 2 seconds.

Integrated control unit for the automatic barrier UP&DOWN.

• Encoder operation management with travel Self-learning and obstacle detection plus anti-crushing with direction reversal.

• Flexible and simple to programme thanks to the dip-switch logic selected.

• Safe and practical to service thanks to the input status diagnostic LEDs.

• Electronic clutch and encoder self-test.

• Output for the opening barrier warning light, blinking light, bar lights (optional)

• Complete with integrated 433Mhz radio receiver, compatible with the ELIOT series of radio controls.

Integrated control unit for the professional barriers of the NIGHT&DAY series (3,5/DD3/6,8).

• Motor outputs with solid state relay for high reliability under heavy duty conditions and extreme climates.

• Reverser input to limit the force of impact when closing and reverse direction for 2 secon-ds.


• Close function when the control is released.

• Bar lights output (optional).

Integrated control unit for the SMART 24 Vdc motor.

• Encoder operation management with travel Self-learning and obstacle detection plus anti-crushing with direction reversal.

• Flexible and simple to programme thanks to the dip-switch logic selected.

• Trimmer for adjusting moving speed, deceleration speed at the end of the manoeuvre and the electronic clutch.

• Electronic clutch and encoder self-test.

• Adjustable pedestrian opening.

• Gate open warning light output.


• Connector for the battery charger.

CO

NTR

OL

UN

IT

CO

NTR

OL

UN

IT

Control unit for one or two motors FLUO-S / FLUO-L.

• Universal control panel for one or two motors. • Slowing on opening and closing managed by an absolute encoder which, combined with the amperometric detection ensures maximum anti-crushing safety. LOG – FL is complete with incorporated two-channel receiver, predisposed for serial management, back-up battery and electric lock. • Full control of programming by means of the digital display and three simple buttons. • Extremely simple to install and service thanks to the SELF-DIAGNOSIS (automatic detection of failures), and AUTOSET (automatic setting of the operating parameters) functions and the extractable terminals.

Control unit, compatible for GEKO-S / GEKO-L / ZERO14 24 Vac.

• Universal control panel for one or two 24V motors with limit switch with 1 or 2 wires.

• Easy to wire also for centralised connections, thanks to extractable terminals, and the AUTO DIAGNOSIS function.

• Safety thanks to electronic antisquashing control with amperometric detection.

• Complete with incorporated two-channel receiver, ready for serial management, back-up battery and electric lock.

• Total control of programming by digital display and three simple buttons.

• Easy setting using the AUTOSET function which allows automatic setting of the operating parameters.

237,00BTX COD. 381400

LOG–FL COD. 381860

LOG–GK COD. 381855

LOG-SB

ARX.246

LOG-SC

9998

Integrated control unit for the SMART -230V – 800 kg and MEGA-2000kg motor.


• It features electrical braking when the limit switches are reached which is useful for gates with particular inertia and weight.

• Reverser input to limit the force of impact when opening and closing and reverse direction for 2 seconds.

• Gate open warning light output.


Integrated control unit for the motor for ZERO8 up-and-over doors

• Flexible and simple to programming thanks to opting for dip-switch logic and trimmer timer adjustment.• Diagnostic LEDs used for maintenance.• Reverser input to limit the force of impact when opening and closing and reverse di-rection for 2 seconds.• Control for a second “slave” motor to connect in parallel and courtesy light.

Integrated control unit for the COLORADO series of barriers.

• Closing function after 3 seconds from when the photocells are crossed.


CO

NTR

OL

UN

IT

3PF X CENTR cod. 381004

Cover unit with three switch START-STOP-EMERGENCY SWITCH.

IT X CENTR cod. 381005

Cover control unit with three-pole switch.

TSM-3P X DECcod. 381050

Membrane keyboard stickers on the control unit cover. Only for DEC control unit.

PT3 A-S-Ccod. 390310

Industrial three button keypad OPEN-STOP-CLOSE.

PT2-I A/Ccod. 390300

Two button interlocked keypad OPEN-CLOSE.

AC

CE

SS

OR

IES

DEC-SC

BSX-BL

BSX-BR

100 RADIOCONTROLS AND RECEIVERS

103102

Four-channel transmitter with 12V AA battery.

Dual-channel outdoor receiver with antenna. 12-24 Vac-dc power.

Plug-in dual-channel receiver. Controls 128.

Plug-in dual-channel receiver. Controls 2048.

433.92Mhz wired antenna for the R4 series of plug-in receivers.

NEW RADIO SYSTEM WITH ROLLING CODE, CONFORMING TO THE EUROPEAN DIRECTIVES 433.92MHz FREQUENCY

STANDARD CODED DIP-SWITCH RECEIVERS CONFORMING TO THE EUROPEAN DIRECTIVES 433.92 MHz FREQUENCY

Dual-channel radio control with 12V AA battery.

Four-channel radio control with 12V AA battery.

Monochannel plug-in receiver applicable on all control units equipped with a radio connector.

Dual-channel plug-in receiver applicable on all control units equipped with a radio connector.

Monochannel outdoor receiver, 12-24 Vac-dc power with relay output with N.O. contact and wired antenna.

Dual-channel outdoor receiver, 12-24 Vac-dc power with relay output with N.O. contact and wired antenna.

433.92Mhz external wired antenna for the E series of plug-in receivers.

Dual-channel transmitter with 12V AA battery.

T-COM DS 4-2

T-COM DS 4-4

RX1-E

RX2-E

RS1-E

RS2-E

ANT-E

COD. 391880

COD. 391890

COD. 392710

COD. 392860

COD. 392800

COD. 392850

COD. 392880

ELIOT 2 - R4

ELIOT 4 - R4

GYGA-BOX

GYGA 2 – R4 STD

GYGA 2 – R4 MAX

ANT-E:

COD. 391120

COD. 391140

COD. 392150

COD. 392160

COD. 392165

COD. 392880

RA

DIO

SY

STE

M

RA

DIO

SY

STE

M

105104

Dual-channel transmitter with 12V AA battery.

Four-channel transmitter with 12V AA battery.

Single-channel plug-in receiver. It controls up to a maximum of 31 users, not expandable.

Dual-channel plug-in receiver. Controls 126 users.

Single-channel outdoor receiver with wired antenna. It controls 31 users. 12-24 Vdc power.

Dual-channel outdoor receiver with wired antenna. It controls 126 users. 12-24 Vdc power.

RADIO CONTROLS WITH ROLLING CODE, CONFORMING TO THE UROPEAN DIRECTIVES 868MHz FREQUENCY

Single-channel outdoor receiver expandable up to 4 channels, with wired antenna. It controls 126 users. 12-24 Vac-dc power.

Single-channel outdoor receiver expandable up to 4 channels, with wired antenna. It controls 126 users. 230 Vac power.Accessories for rolling-code receivers.

Relay card for adding a channel to the RSM receivers. Monostable-bistable output.

868 Mhz wired antenna for the R8 series of plug-in receivers.

Memory card up to 500 codes rolling code.

RADIO CONTROLS WITH ROLLING CODE, CONFORMING TO THE EUROPEAN DIRECTIVES 868MHz FREQUENCY

T-COM R8-2

T-COM R8-4

RX1-R8

RX2-R8

RS1-R8

COD. 391480

COD. 391490

COD. 392410

COD. 392460

COD. 392400

COD. 392450RS2-R8

RSM-R8 12-24V

RSM-R8 230V

TRO SCHEDA

ANT-868

MEMO 500

COD. 392470

COD. 392472

COD. 392578

COD. 392480

COD. 392579

RA

DIO

SY

STE

M

RA

DIO

SY

STE

M

107

Remote control digital pushbutton panel for exterior use, with backlit light-touch keypad.

Receiver 2048 codes with rolling code and built-in programming display. Each exit ( max. 4) can be confi gured in an impulse, bi-stable, timer or anti-aggression mode. The connection of the remote control units can be performed manually, via radio and in blocks of 100 using the DOMINO programmer. Access to the pro-gramming mode can be protected by a pas-sword. Power supply 230 Vac 50Hz.

New-generation universal handheld programmer. This permits in-teraction with clonable-algorithm receivers and transmitters. Pos-sibility of memorizing different lists of receivers. Simplifi ed para-meter management. USB interface for connection to the PC.

GOProximity reader for indoor and outdoor use with compact size and thickness. Built with vandal-proof materials. Detection distance 3-4 cm. For combination with GO SYSTEM, compatible with GYGA SCREEN – R4. Output connection with protocol according to Wiegand 26 bit standard.

• Power supply voltage: 12 Vdc (supplied by GO SYSTEM)

• Degree of protection: IP44

• Max connection distance between reader and management unit: 5 metres

• Reading distance: 3-4 cm

• Signal indications: buzzer + two-colour LED

• Installation: wall-mounted.

Installed inside the protected area, this unit memorises the card codes and receives signals from the GO proximity system. It manages: • door opening input • door status input • door alarm output • door lock output • up to 6000 cards as a stand-alone system

GO SYSTEM: Management unit for GOPower supply voltage: 230 Vac Inputs: opening button, door status sensor Access control output: 10A 250V relay with insulated contact Auxiliary output (door-open alarm): 10A 250V relay Degree of protection: IP20

Proximity card ISO standard.

AC

CES

SC

ON

TRO

LM

AN

AG

EMEN

T

DIGITO COD. 393295

GYGA SCREEN-R4

DOMINO

COD. 392170

COD. 393400

GO

GO SYSTEM

GO CARD

COD. 393210

COD. 393255

COD. 393235

AC

CE

SS

CO

NTR

OL

MA

NA

GE

ME

NT

109

Photocell for recessed mounting in a 60 mm diam. post hole; it has a 20 m range.Equipped with test point and centring adjustment screws.Designed for high immunity to interference. 12-24Vac-dc power.

PH

OTO

CE

LL

Outdoor photocell equipped with test point and centring adjustment screws. Designed for high immunity to interference. 12-24Vac-dc power.

Photocell for mounting outdoors. It is very slim (about 3 cm wide) which makes it particularly suitable for applications on posts that are not very thick, such as garage doors and pedestrian doors.

Plastic box for recessed mounting for FOTO-I/SEZ-I selectors.

Plastic box for external mounting for FOTO-E/SEL-E selectors.

FOTO-I COD. 385120

FOTO-E COD. 385020

VARCO-E

CM-FS COD. 390430

COD. 390440

COD. 385015

CE-FS

CO

MM

ON

AC

CE

SS

OR

IES

111110

FLA

SH

ING

LIG

HT

Amber colour self fl ashing light 24 Vdc, with integrated antenna. For: LOG-GK and LOG-FL control unit.

Yellow fl ashing light 230 Vac with intermittently operated by control unit. For: BTX, DEC-BT, BSX-BL, BSX-BR, CDK, CDK-US, DEC-SM, DEC-ST/05 control unit.

Holder plate for SL-R and SL-LAMP fl ashing light.

230 Vac yellow auto fl ashing light with integrated antenna.For: ASX.03I, ARX.246,I-MAN, BTX, DEC-BT, BSX-B, BSX-BL, BSX-BR, DEC-SC control unit.

Key selector switch START-STOP for external mountin.g

SE

LEC

TOR

Key selector switch START-STOP for recessed mounting.

Plastic box for recessed mounting for FOTO-I/SEL-I selectors.

Plastic box for external mounting for FOTO-E/SEL-E selectors.

SEL-E-MS COD. 390415

SEL-I-MS COD. 390410

CM-FS COD. 390430

CE-FS COD. 390440

88,00

109,00

SL-R-24V-AI COD. 385230

SL-LAMP 230V COD. 385210

ST-SL COD. 385192

SL-R-230V-AI COD. 385235

113112

PO

ST

FOR

PH

OTO

CE

LL

Pair of posts for photocells . Base with fasteners exluded.

Posts for photocells (10 pieces). Base with fasteners exluded.

Posts for photocells and selectors, H = 1 meter. Base with fasteners exluded.

Selectors holding posts, H = 1 meter. Base with fasteners exluded. Base with fasteners for one posts.

COL-S 1 pz BS-COL

FLU

SH

MO

UN

TED

ME

CH

AN

ICA

L

Flush mounted mechanical safety rib, equipped with three micro-switches with a resistive output of 8.2Kohm or N.C. Certifi ed accor-ding to the standard on safety products EN954-1 in cat.2 (EN12978) . Combined with the Radioband radio-relay system, they allow the gate leafs to be made safe. Certifi ed (EN 954-cat. 2,3) mechanical rib . H =1.500 mm.

Certifi ed (EN 954-cat. 2,3) mechanical rib. H = 1.700 mm.



868 MHz receiver that can learn up to 6 Radioband-T transmitters.With container for outdoor installation and built-in antenna.

868 MHz transmitter with a range of 10m, powered with 2 AA 1.5 V batteries.Combinable with the sensitive CMC edges and also with the ribs with NC output contact.

COL- F 2 pz COD. 385400

COL-F 10 pz COD. 385410

COL-FS 1 COD. 385430

COD. 385420 COD. 385440

CMC 1,5 COD. 386215

CMC 1,7 COD. 386217

CMC 2,0 COD. 386220

CMC 2,5 COD. 386225

RADIOBAND-R COD. 386280

RADIOBAND-T COD. 386290

115114

9.OBLIGATIONS OF THE PURCHASER9.1 The Purchaser must possess the structures and the necessary means to assure the correct use of the products as well as the necessary knowledge and technological capa-bilities for their correct use. 9.2 Moreover, the Purchaser must abide by all regulations and local laws, following good business practices for the entire duration of this Agreement, keeping the Seller harmless from and against any damage, whether direct or indirectly, arising from non-compliance by the Purchaser of the foregoing regulations.9.3. It is agreed between the parties that the Purchaser shall be completely responsible for failing to inform the Seller of regulations and local laws in force in the Country whereby the Product will be used. Given the foregoing circumstances, the Purchaser shall be liable for costs associated with products that do not conform to laws of the Country in which the product will be used.9.4 If the Purchaser fails to comply with its contractual obligations specifi ed in the foregoing sections, it must:- collect the ordered products and those in the process of been delivered and must bare all relevant delivery expenses- make payments for the orders made- keep the Seller harmless from and against any damages, whether direct or indirect, arising from non-compliance by the Purchaser of the foregoing regulations.

10.DEFECTS AND CLAIMS10.1 For any defects or claims related to the ordered Products please note that:a)claims regarding any recognisable defects in the product must be reported in writing within 30 (thirty) days following the receipt of the product; for other cases a period of 8 (eight) days will be effective from the time in which the Purchaser becomes aware of the defect. In both cases, claims must be accompanied by samples collected jointly with the Seller or if necessary by a person appointed by the seller, within 40 (forty) days following receipt of the claim.Claims that refer to characteristics of products that are not specifi ed in the technical specifi cations will not be taken into consideration and neither claims that are not relevant to the intended use of the Product. b)packaging defects must be reported in writing upon delivery in order to be valid. c)claims relatively to the quality or integrity of the Product or packaging will not be admitted if:i)the Purchaser does not make the Product accessible in order to ascertain its condition10.2 The Purchaser must keep the product considered defective in a proper place and make it accessible to the Seller in order to conduct the necessary inspections and in any case, provide whatever necessary in order to limit or prevent further damages to the product.10.3 Notwithstanding the foregoing, the Purchaser must discontinue using the product as soon as it becomes aware of the product considered defective and shall take the neces-sary measures to prevent further damages.10.4 If the results of the inspection confi rm the existence of a manufacturing defect, the Seller shall replace all products determined to be useless.10.5 The Seller’s liability is limited to manufacturing defects.10.6 The product will be considered as accepted if the purchaser fails to report a claim or complaint within the above-mentioned term of if it continues to use the product despite defects revealed thereby waiving its right to contest a claim.

11.OBLIGATIONS OF THE PURCHASER IN THE EVENT OF DEFECTS AND CLAIMS11.1 The Purchaser shall inform the Seller without delay of all defects as per section 10, including apparent defects regarding the quality and quantity of products. Said notice must be sent by no later than the term specifi ed in section 10; during this period, the product shall be made accessible so that it can be returned to the seller, which shall provide all required instructions.11.2 The notice should be sent immediately if the product defect can cause damages.11.3 Moreover, the notice must include a description of the defect.11.4 The purchaser will no longer be entitled to a repair or replacement if it fails to send the foregoing notice according to the agreed terms.11.5 The Seller shall be entitled to reject the claim if the Purchaser informs the seller of defects according to the agreed terms and no defects are revealed.11.6 It is the Purchaser’s responsibility to keep the Product considered defective in a proper place and make it accessible to the Seller in order to conduct the necessary inspections and in any case, provide whatever necessary in order to limit or prevent further damages to the product; otherwise the Purchaser will waive its right to assert a claim.

12.FORCE MAJEURE12.1 The Seller will not be held liable for delays in deliveries or for non-fulfi lment caused, whether directly or indirectly, by:- force majeure events (by way of example, though not exhaustive, force majeure events may include restrictions imposed by law, wars, revolts, revolutions, strikes or other em-ployment disputes, fi res, fl ooding, sabotage, nuclear accidents, earthquakes, storms, epidemics)- circumstances beyond the control of the Seller, enough to prevent the seller from relying on its work force, from using materials, raw materials, components, systems in general, energy, fuel, means of transportation, authorisations or legal dispositions. The Seller shall inform the Purchaser by writing without delay when the force majeure event ceases to exist.

13.DRAWINGS AND DOCUMENTS13.1 Unless otherwise authorised by the Seller, all drawings, technical documents, specifi cations, pictures or other information regarding the Product and its manufacturing process provided by the Seller, shall only be used for their intended purpose e.g. use, maintenance and product commercialisation. 13.2 The sale of the Product to the Purchaser does not imply the grant of any license, trademark rights or patent rights, regardless of whether the product is intended for distribution or other form of trade.

14.INTELLECTUAL PROPERTY RIGHTS14.1 All information, technical standards, specifi cations and procedures provided by the Seller remain the exclusive property of the latter. This Agreement does grant the Purchaserany license or rights to any trademark or patent rights, nor other intellectual property rights in relation to the technical specifi cations and the know-how provided thereto. 14.2 The Purchaser must promptly return all information, documents and specifi cations pertaining to the Seller upon discontinuance of the contractual relationship or upon com-pletion of the service.

15.PRIVACY AND CONFIDENTIALITY The Purchaser and the Seller acknowledge that each party may gather confi dential information regarding the business of the other party. Each party undertakes to keep strictly confi dential any information gathered and undertakes not to disclose such information to any third party, thereby using the information for the sole purpose of the sales agreement and returning any confi dential documents upon request of the other party.

16.HEALTH AND SAFETY STANDARDSThe Products are manufactured pursuant to Italian health and safety standards. The Purchaser shall be completely responsible for failing to inform to the Seller of health and safety standards and public health laws in force in the Country whereby the Product will be used. The Purchaser shall be exclusively liable for costs associated with products that do not conform to laws of the Country in which the product will be used.

17.INSTALLATION AND START UPThe installation and startup of sold Products is regulated based on appendix II of these General Conditions of Sale, which constitute an integral part of the agreement; therefore, the acknowledgement and acceptance of these General Conditions also constitute the acknowledgement and acceptance of appendix II.

18.PRIVACY POLICYPursuant to Italian law no. 196/2003, the Seller acknowledges that: a) the Purchaser’s data will be processed and disclosed to third parties (e.g. banks, external consultants, etc) abiding by the foregoing law for the purposes of the agreements b) the Purchaser is entitled to exercise rights pursuant to article 13 of Italian Law no. 675/96 (Annexe 1)

19.APPLICABLE LAWS AND COMPETENT COURT19.1 These General Conditions of Sale and Sales Agreements related thereto are regulated by Italian Law; disputes regarding the interpretation or application of this agreement will be settled by the court where the defendant resides.19.2 Disputes arising from the application of these General Conditions of Sale or from the interpretation of single sales agreement are regulated by Italian law.19.3 The prevailing language for these General Conditions of Sale is Italian, despite any translations in other languages. In the event of inconsistency between the Italian version and the translated text, the Parties agree hereto that the Italian version will prevail and will be the offi cial document used for the interpretation of these General Conditions of Sale.19.4 The Vienna Convention on the International Sale of Goods is expressly excluded from this Agreement (Vienna – 1980 – CISG).

1.DEFINITIONSThe following terms specifi ed in these General Conditions of Sale shall be interpreted as follows:a) the Seller: O&O S.r.l.;b) the Purchaser: The purchaser of the Products c) the Parties: the Seller and the Purchaser referred jointlyd) Product/s: The subject-matter of the sale between the Purchaser and the Seller as described in the sales agreemente) Technical specifi cations: any document provided to the Seller by the Purchaser in regards to technical specifi cations of the Product/sf) Sales Agreement: any agreement or document made subsequent to the agreement, or amendment or supplement made theretog) Order: any communication, whether in writing or orally, whereby the Purchaser informs the Seller its intention to purchase one or more Productsh) Order Confi rmation: the form used by the Seller to confi rm the Purchaser the sale of one or more Productsi) User Instructions: assembling instructions or user and maintenance instructions that may be provided by the seller along with the product

2.APPLICABLE GENERAL TERMS AND CONDITIONS2.1 These General Conditions of Sale are applicable to all purchases of Products made between the Seller and the Purchaser and prevail over any other purchase conditions pro-vided by the Purchaser, regardless of whether the conditions are disapproved or not.2.2 If there is a trade agreement in force, between the parties or single sales agreements relatively to the Product, these General Conditions of Sale will constitute a supplement to all previous agreements or single sales agreements made between the Seller and the Purchaser in relation to the Product.2.3 Any amendments or supplements made to these General Conditions of Sale will be valid and effective between the Parties only if made in writing and signed by the Seller.

3.ORDER ACCEPTANCE3.1 The order constitutes an irrevocable proposal by the Purchaser with a validity of ... days; effective upon receipt of order and it formalises all previous negotiations made between the parties.3.2 The information on the order form consists of: price and method of payment; product specifi cations; quantity; type of packaging; conditions for returned goods, means of transportation; destination; delivery times and consignment documents.3.3 Orders are subject to acceptance by the Seller and are accepted upon receipt of the order confi rmation provided by the Seller.3.4 Any order confi rmations will be valid for …. days, effective from their issue date and will no longer be valid if not processed within …. days.3.5 Orders may be changed only if agreed in writing thereafter.

4.DELIVERY4.1 Normally, the delivery shall take place based on ................................. INCOTERMS 200 ICC – Paris. Other conditions may be agreed through specifi c agreements made betwe-en the parties.4.2 The Purchaser shall be liable for all expenses and risks, including mandatory insurance obligations.4.3 Delivery times given are approximate and are not binding for the Seller. Moreover, the Seller shall not be responsible for delayed or missed deliveries in the event of force majeure or conditions beyond its control. 4.4 Partial deliveries shall not be admitted, unless agreed otherwise.4.5 If the Purchaser cannot receive the goods at the agreed date, it is the Purchaser’s responsibility to inform the Seller of the reason prior to the delivery and arrange a new rea-sonable delivery time.4.6 If the Purchaser fails to accept the goods on the agreed delivery date, it shall be liable for payment of all expenses owed as if the goods were delivered. Without prejudice to the Seller’s right to assert claim for greater damages, the Purchaser shall be liable for warehouse expenses and decay of goods or loss of value, from the time in which the Seller gives notice that the goods are ready for shipment; this notice should be sent to the Purchaser, either electronically or by mail.4.7 After 30 days following receipt of notice, the Seller will be entitled to terminate this agreement by informing the Purchaser by means of a registered letter with advice of delivery pursuant to section 17 of this agreement.

5.TRANSPORT PACKAGING5.1 Packaging costs are included in the price of the Product based on the Seller’s standard conditions. The Purchaser shall be liable for special packaging requests if available. 5.2. The Seller is entitled to select the type of packaging depending on transport packaging needs, unless otherwise specifi ed by the Purchaser in the Order.

6.PRICE6.1 The Seller shall apply the price agreed with the Purchaser in the Sales Agreement, which does not include transportation costs, insurance, taxes, customs fees, etc.6.2 Any increase in prices in relation to an increase in production costs arising from price changes in raw materials, labour or other costs arising subsequent to the Sales Agreement, must be agreed in writing and approved by both parties.6.3 If the price is not specifi ed in the Sales Agreement, the price that is normally quoted by the Seller for the Product will be applicable as per the price list currently in force.6.4 Any complaints or disputes shall by no means entitle the Purchaser to delay or omit payment or reduce the price agreed.

7.INVOICING AND PAYMENT7.1 The Seller shall issue an invoice based on the price specifi ed in the Order Confi rmation where the method of payment will also be established. 7.2 If the Purchaser fails to pay within the agreed term of payment, the Seller will be entitled to demand statutory default interest pursuant to the Italian Legislative Decree no. 231/2002.7.3 Repeated delays in payment by the Purchaser will entitled the Seller to terminate the agreement and demand compensation for damages, without prejudice to section 11 of this agreement.

8.PRODUCT QUALITY AND THE SELLER’S WARRANTY8.1 All products supplied by the Seller are good quality products, manufactured, packaged and sold in accordance with the technical specifi cations provided the Purchaser. 8.2. Moreover, the Seller warrants that all Products conform to the technical specifi cation on the order form and on the technical documentation provided by the Purchaser; the Seller will only be liable for products that do not conform to the technical specifi cations.8.3 The Seller warrants proper functioning of the products for 24 months from the date of manufacture. 8.4. Any materials and/or parts of Products that are not manufactured by the Seller will not be covered under warranty; the Seller will not provide warranty for damages arising from usage not specifi ed in the Order or in the Order Confi rmation.8.5 The warranty provided by the Seller is limited to repairs and/or replacements of defective parts, manufacturing defects or poor quality of materials, except for damages due to normal wear and tear and for parts that are no longer available in the market, as well as for faults caused by overload, damages due to inexperience use, negligence or in the event that the Purchaser neglects to follow the instructions provided by the Seller. The Purchaser shall inform the Seller of any defects found on the products pursuant to section 11 of this agreement; otherwise the warranty will not be valid.8.6. The Seller will not be liable for damages, whether direct or indirect, arising from the time required to repair and/or replace a product under warranty.8.7. The Purchaser shall lose any right to the warranty provided the Seller, if: - it does not carry out operations and/or installations following best practice guidelines - if it conducts or relies on third parties to conduct repairs, replacements, changes or other alterations to the Product during the warranty period without prior written authorisation from the Seller- if it does not abide by the rules, user guidelines or instructions provided by the Seller regarding the correct use of the Product as well as its correct regular maintenance

GENERAL CONDITIONS OF SALE

download english catalogue - o&o s.r.l

Documents