downhole toolsdownholetools - fangmann group€¦ · t fax: f 12.03.2012 mechanical set retrievable...
TRANSCRIPT
Fangmann Energy Services GmbH & Co. KG Hohe Tannen 14 49661 Cloppenburg Germany Tel.: +49 (0)4471 98008-0 Fax: +49 (0)4471 98008-18
Downhole ToolsDownhole Tools
Fangmann Energy Services GmbH & Co. KG Brietzer Weg 10 29410 Salzwedel Germany Tel.: +49 (0)3901 83 63-0 Fax: +49 (0)3901 83 63-28
Hohe Tannen 14 49661 Cloppenburg Germany Tel.: +49 (0)4471 98008-0 Fax: +49 (0)4471 98008-18 www.fangmanngroup.com
F
12.03.2012
Mechanical Set Retrievable PackerELK1-X PackerTechnical Data Sheet
The ELK1-X Mechanical Packer is a retrievable, double-grip compression or tension-set production packer that holds pressure from above or below. Once set the tubing string can be left in tension, compression, or in a neutral position. A large internal bypass reduces the swabbing effect during run-in and retrieval, and closes when the packer is set. When the packer is released, the bypass opens first, allowing the pressure to equalize before the upper slips are pulled from the casing. The ELK1-X Packer also features an upper slip releasing system that reduces the force required to release the packer. A non-directional slip is released first, making it easier to release the other slips. These flexible features allow the ELK1-X to be run in a variety of applications ranging from Production Packer to Bridge Plug to Service Packer.
A large internal bypass reduces swabbing when running and retrieving. The by-pass closes when the packer is set and opens prior to releasing the upper slips when retrievingto allow pressure equalization
The packer is designed for differential pressures up to 10.000 PSI (69 MPa) from above or below.
The J-slot design allows easy setting and releasing; 1/4 turn right-or left hand set, 1/4 turn right-hand release.
The ELK1-X Packer can be left in tension, neutral or compression after setting, depending on well conditions and the required application.
Adjustable straight pull emergency shear release or emergency rotate release feature.
Possible to run with accessories like Circulating Valves, On-Off Tools or Landing Nipples.
Fangmann Energy Services GmbH & Co. KG Brietzer Weg 10 29410 Salzwedel Germany Tel.: +49 (0)3901 83 63-0 Fax: +49 (0)3901 83 63-28
Hohe Tannen 14 49661 Cloppenburg Germany Tel.: +49 (0)4471 98008-0 Fax: +49 (0)4471 98008-18 www.fangmanngroup.com
Min ID Max ID
4 1/2 9,5-13,5 3.920 4.090 3.750 1.938 2-3/8" EU 8RD 10,000 Straight Pull Right4 1/2 9,5-13,5 3.920 4.090 3.750 1.938 2-3/8" EU 8RD 7,500 Rotate release Right
5 18-20,8 4.156 4.276 4.000 1.938 2-3/8" EU 8RD 10,000 Straight Pull Right5 18-20,8 4.156 4.276 4.000 1.938 2-3/8" EU 8RD 10,000 Straight Pull Left5 18-20,8 4.156 4.276 4.000 1.938 2-3/8" EU 8RD 7,500 Rotate release Right5 11,5-15 4.408 4.560 4.125 1.938 2-3/8" EU 8RD 10,000 Straight Pull Right5 11,5-15 4.408 4.560 4.125 1.938 2-3/8" EU 8RD 10,000 Straight Pull Left5 11,5-15 4.408 4.560 4.125 1.938 2-3/8" EU 8RD 7,500 Rotate release Right
5 1/2 14-20 4.778 5.044 4.625 1.938 2-3/8" EU 8RD 7,500 Rotate release Right6 5/8 24-32 5.675 5.921 5.583 2.500 2-7/8" EU 8RD 7,500 Straight Pull Right
7 26-32 6.094 6.276 5.875 2.500 2-7/8" EU 8RD 10,000 Straight Pull Right7 26-32 6.094 6.276 5.875 2.500 2-7/8" EU 8RD 10,000 Straight Pull Left7 26-32 6.094 6.276 5.875 2.500 2-7/8" EU 8RD 7,500 Rotate release Right7 17-26 6.276 6.538 6.000 2.500 2-7/8" EU 8RD 10,000 Straight Pull Right7 17-26 6.276 6.538 6.000 2.500 2-7/8" EU 8RD 10,000 Straight Pull Left7 17-26 6.276 6.538 6.000 2.500 2-7/8" EU 8RD 7,500 Rotate release Right
7 5/8 33,7-39 6.625 6.765 6.437 2.500 2-7/8" EU 8RD 7,500 Rotate release Right7 5/8 24-29,7 6.875 7.025 6.672 2.500 2-7/8" EU 8RD 7,500 Rotate release Right8 5/8 32-40 7.725 7.921 7.500 4.000 4-1/2" EU 8RD 7,000 Rotate release Right8 5/8 24-28 8.017 8.097 7.750 4.000 4-1/2" EU 8RD 7,000 Rotate release Right9 5/8 43,5-53,5 8.535 8.755 8.250 4.000 4-1/2" EU 8RD 7,000 Rotate release Right9 5/8 32,3-43,5 8.755 9.001 8.500 4.000 4-1/2" EU 8RD 7,000 Rotate release Right
Other sizes from 3 1/2" to 13 3/8" on request.
Threads Box upPin down
Pressure Rating (PSI)
EmergencyRelease
Right / LeftHand set
Casing OD (inch)
Casing Weight(lbs/ft)
Setting RangeTool OD (inch)
Tool ID (inch)
F
24.06.2014
Hydraulic Set Retrievable PackerFHSP PackerTechnical Data Sheet
The Fangmann Hydraulic Set Packer is a hydraulic setsingle-string retrievable Packer and may be used invirtually any production application. Tubing pumppressure is used to set the packer and the setting forceis locked into the packer by a body lock ring. A large internal by-pass reduces swabbing when running and retrieving.The by-pass closes when the packer is set, and opensduring the releasing process to allow pressureequalization.Shear screws are used to control the packer release.The standard FSHP Packers are designed for differential
pressures up to 7,500 PSI.
Adjustable setting initiation pressure
Adjustable shear release
Straight pull release
Fangmann Energy Services GmbH & Co. KG Brietzer Weg 10 29410 Salzwedel Germany Tel.: +49 (0)3901 83 63-0 Fax: +49 (0)3901 83 63-28
Hohe Tannen 14 49661 Cloppenburg Germany Tel.: +49 (0)4471 98008-0 Fax: +49 (0)4471 98008-18 www.fangmanngroup.com
4.00 4-1/2 EUE 9 5/8
32.3 – 43.5 8.755 - 9.001 8.500 4.00 4-1/2 EUE
43.5 – 53.5 8.535 - 8.755 8.250
8 5/8 32 - 40 7.725 - 7.921 7.500 4.00 4-1/2 EUE
33.7 – 39 6.625 - 6.765 6.4532.50 2-7/8 EUE
3.00 3-1/2 EUE
3-1/2 EUE
7
7 5/824 – 29.7 6.875 - 7.025 6.672
2.50 2-7/8 EUE
3.00 3-1/2 EUE
5.8752.50 2-7/8 EUE
3.00 3-1/2 EUE
29 – 35 6.004 - 6.184 5.812 3.00
17 – 26 6.276 - 6.538 6.0002.50 2-7/8 EUE
3.00 3-1/2 EUE
26 – 32 6.094 - 6.276
3-1/2 EUE
24 – 32 5.675 - 5.921 5.5002.50 2-7/8 EUE
3.00 3-1/2 EUE
2-7/8 EUE 5 1/2
2.00 2-3/8 EUE
2.50 2-7/8 EUE
6
6 5/817 - 24 5.921 - 6.135 5.750
3.00
2.38 2-7/8 EUE 4.500
17 – 23 5.240 - 5.450 5.063 2.38 2-7/8 EUE
4 1/29.5 – 13.5
15.1
14 – 20 4.778 - 5.012 4.625
20 – 23 4.670 - 4.778
2.38
2-3/8 EUE
18 – 21 4.154 - 4.276
3.920 - 4.090
3.826
3.750
3.656
1.94
1.94
*Other sizes and connections available upon request
RecommendedHole Size(inches)
Tool OD (inches)
Tool ID (inches)
Thread connection Box up/Pin down
Size(inches)
Weight(lbs/ft)
Casing
4.000 1.94 2-3/8 EUE
2.00 2-3/8 EUE
2-3/8 EUE
2-3/8 EUE
511.5 – 15 4.408 - 4.560 4.125 1.94
Fangmann Energ
Technical Data Sheet 12.03.2012
T-2 On-Off Tool
T-2 ON/OFF Tool
The Model T-2 On-Off Tool is a left-hand release, tubing disconnect device with an internal lock profile for securing flow control equipment. It is used in operations that require tubing disconnect and reengagement without unsetting the packer. The internal lock profile is used to retain flow control devices such as plugs, valves or chokes. The T-2 On-Off Tool comprises two basic components, the Overshot and Stinger. The Overshot has a Box Up which connects to tubing string. The Stinger has a Pin Down which connects to the packer. The Overshot has a wash over shoe configuration which allows cutting through debris. The Overshot automatically jays up on Stinger when lowered into well.
Designed to isolate a lower zone or to disconnect the tubing
without unsetting the packer.
1/4 turn Left-hand release, auto-on.
Bonded seals allow multiple disconnects.
Can be pinned in a shear-up or shear-down position.
Type X internal lock profiles are standard.
Full open or solid Stinger for Bridge Plugs available.
4 1/2 ‐ 5 3,75 1,87 2 3/8" EU 2 3/8" EU 1,87
6 5/8 5,50 2,31 2 7/8" EU 2 7/8" EU 2,31
7 5,88 2,31 2 7/8" EU 2 7/8" EU 2,31
9 5/8 8,02 2,81 3 1/2" EU 3 1/2" EU 2,81
9 5/8 8,25 2,81 4 1/2" EU 4 1/2" EU 2,81
Casing Size
(inch)
Stinger
(X‐Profile)
(inch)
Max OD
(inch)
Min ID
(inch)
On‐Off Tool
Threads
Box
Seal Stinger
Threads
Pin
Fangmann Energy Services GmbH & Co. KG Brietzer Weg 10 29410 Salzwedel Germany Tel.: +49 (0)3901 83 63-0 Fax: +49 (0)3901 83 63-28
Hohe Tannen 14 49661 Cloppenburg Germany Tel.: +49 (0)4471 98008-0 Fax: +49 (0)4471 98008-18 www.fangmanngroup.com
F
12.03.2012
Model H Circulating ValveTechnical Data Sheet
Model H – Circulating Valve The Model H Circulating Valve is a multiple acting
tool used with service packers for equalizing tubing
and annulus pressures. Special o-ring type seals
will withstand repeated cycles of equalizing. The
type H circulating valve got a straight slot which
provide torque transmitting through the valve to
allow setting of the service packer. The straight
slot circulating valve is closed by straightly setting
down and opened by straightly picking up.
This allows to open and close the valve multiple
times without unsetting the service packer.
2 3/8" 3,750 2 3/8" EU
2 7/8" 4,500 2 7/8" EU
3 1/2" 5,780 3 1/2" EU
Size
(inch)
Tool OD
(inch)
Threads Box Up
Pin Down
Fangmann Energy Services GmbH & Co. KG Brietzer Weg 10 29410 Salzwedel Germany Tel.: +49 (0)3901 83 63-0 Fax: +49 (0)3901 83 63-28
Hohe Tannen 14 49661 Cloppenburg Germany Tel.: +49 (0)4471 98008-0 Fax: +49 (0)4471 98008-18 www.fangmanngroup.com
F
12.03.2012
FT Sleeve Valve Cement RetainerTechnical Data Sheet
Cement Retainer
Sliding Sleeve Valve Cement Retainer are used for cementingoperations. These drillable retainers set securely in anyhardness casing. Easy drilled out. 10.000 PSI pressure rating. Can be easily converted to Bridge Plug or wire-lineset with adapter to Baker Setting Tool.
Mechanical Setting Tool
Is used to mechanically set Cement Retainer. It has a built-insnap-latch, allowing the stinger to be latched into the CementRetainer with set-down weight and released with either up-strainor right-hand rotation. This snap-latch feature allows the sleeve-valve tobe shifted open or closed while the tubing is still anchored tothe retainer. Cement Retainer can be set and pressure tested in a singletrip. Can be easily converted to mechanically set Bridge Plugs.
Size Weight Max. Tool OD
SettingForce
(inch) (lbs/ft) (inch) (inch) (inch) (lbs)
4 5.6-14 3,340 3,732 3,140 20.000
4 1/2 9.5-16,6 3,826 4,090 3,593
5 11.5-20.8 4,156 4,560 3,937
5 1/2 13-23 4,580 5,044 4,312
5 3/4 14-25.2 4,890 5,290 4,700
6 5/8 17-32 5,595 6,135 5,375
7 17-35 6,004 6,538 5,688
7 5/8 20-39 6,625 7,125 6,312
8 5/8 24-52 7,511 8,097 7,125
9 5/8 29.3-61.1 8,435 9,063 8,125
10 3/4 32.75-60.7 9,660 10,192 9,437
11 3/4 38-60 10,772 11,150 10,437
13 3/8 48-72 12,175 12,715 12,000
16 65-118 14,576 15,250 14,125
20 94-133 18,730 19,124 18,375
33.000
50.000
Preferred Range of Casing
Ids Min. Max.
Casing Cement Retainer
Fangmann Energy Services GmbH & Co. KG Brietzer Weg 10 29410 Salzwedel Germany Tel.: +49 (0)3901 83 63-0 Fax: +49 (0)3901 83 63-28
Hohe Tannen 14 49661 Cloppenburg Germany Tel.: +49 (0)4471 98008-0 Fax: +49 (0)4471 98008-18 www.fangmanngroup.com
Fangmann Energy Services GmbH & Co. KG Hohe Tannen 14 49661 Cloppenburg Germany Tel.: +49 (0)4471 98008-0 Fax: +49 (0)4471 98008-18
Technical Data Sheet 12.03.2012
Hydo-Mechanischer Bridge Plug
HMBP Bridge Plug:
The HMBP Bridge Plug is a simple, economical, fully drillable,
tubing run permanent bridge plug. A built in setting tool is designed
as part of the tool for efficiency. It is ideal for applications in which a
Wireline unit is unavailable. The ‘HM-BP’ is run and set using
conventional tubing. The tool utilizes differential pressure to set
the top slips of the ‘HMBP’, and then tubing tension is used to
fully set the bridge plug. This allows setting pressure to be kept low.
HMBP Bridge Plug Features:
C Self contained setting tool
C Constructed with drillable Cast Iron materials
C One piece slip design
C
Right hand rotation release the setting tool from the plug
Fangmann Energy Services GmbH & Co. KG Brietzer Weg 10 29410 Salzwedel Germany Tel.: +49 (0)3901 83 63-0 Fax: +49 (0)3901 83 63-28
Hohe Tannen 14 49661 Cloppenburg Germany Tel.: +49 (0)4471 98008-0 Fax: +49 (0)4471 98008-18 www.fangmanngroup.com
HM BRIDGE PLUG
OD inch WT. (LBS/FT) O.D. inch MIN. inch MAX. inch MIN. lbs MAX. lbs
4 1/2 9.5 - 16.6 3.593 3.826 4.090 22.000 30.0005 11.5 - 18 3.937 3.920 4.560 22.000 30.000
5 1/2 13 - 25 4.312 4.580 5.047 22.000 30.0005 3/4 22.5 - 25.2 4.312 4.580 5.047 22.000 30.000
6 14 - 26 4.937 5.140 5.595 22.000 30.0006 5/8 34 4.937 5.140 5.595 22.000 30.000
6 10.5 - 12 5.375 5.595 6.366 30.000 45.0006 5/8 17 - 34 5.375 5.595 6.366 30.000 45.000
7 23 - 40 5.375 5.595 6.366 30.000 45.0006 5/8 17 - 22 5.687 5.989 6.655 30.000 45.000
7 17 - 35 5.687 5.989 6.655 30.000 45.0007 5/8 20 - 39 6.312 6.625 7.263 30.000 45.0008 5/8 24 - 49 7.125 7.511 8.248 35.000 48.0009 5/8 29.3 – 61.1 8.125 8.375 9.063 35.000 48.00010 3/4 54 - 81 9.000 9.250 9.784 35.000 48.00010 3/4 32.7 - 51 9.437 9.850 11.150 35.000 48.00011 3/4 38 - 60 9.437 9.850 11.150 35.000 48.00013 3/8 77 - 102 11.562 11.633 12.464 35.000 48.00013 3/8 48 - 72 12.000 12.347 12.715 35.000 48.000
16 65-109 14.250 14.688 15.250 40.000 48.00018 5/8 76-96.5 17.250 17.655 18.730 40.000 48.000
20 133-169 17.250 17.655 18.730 40.000 48.000Pressure & Temperature Ratings
SETTING FORCES
2-3/8 tubing - 7-5/8 casing8-5/8 casing - 9-5/8 casing10-3/4 casing - 11-3/4 casing13-3/8 casing16 -20 casing
10,000 PSI @ 325 Deg F8,000 PSI @ 300 Deg F5,000 PSI @300 Deg F3,000 PSI @ 300 Deg F2,000 PSI @ 200 Deg F
CASING SETTING RANGE
Technical Data Sheet 18.09.2013
Wireline and Coiled Tubing Accessories
Faices GmbH & Co. KG
Hohe Tannen 14 49661 Cloppenburg Germany
Tel.: +49 (0)4471 98008-0 Fax: +49 (0)4471 98008-18
Fangmann Energy Services GmbH & Co. KG Brietzer Weg 10 29410 Salzwedel Germany Tel.: +49 (0)3901 83 63-0 Fax: +49 (0)3901 83 63-28
Hohe Tannen 14 49661 Cloppenburg Germany Tel.: +49 (0)4471 98008-0 Fax: +49 (0)4471 98008-18 www.fangmanngroup.com
Landing Nipples The Landing Nipples are profiled subs typically run below pretrievable or permanent packers.These subs provide a method of placing variousflow control devices in the completion equipment.Furthermore the landing nipples have an internalseal bore and profile to accept a lockingdevice to anchor a flow control accessory. Landing Nipples1.87" X‐Profile XN‐Profile 2 3/8" EU2.31" X‐Profile XN‐Profile 2 7/8" EU2.81" X‐Profile XN‐Profile 3 1/2" EU
Other sizes, threads or profiles on request
Wireline Setting Adapter for Cement Retainer / Bridge Plugs
The Wireline Adapter Kit is used to set Cement Retainer or
Bridge Plugs with a Baker #20 Style Settingtool on
Wireline.
Stinger Seal Assembly
The Stinger Seal Assembly is used to operate a previously
Wireline set Cement Retainer. A Snap Latch Coupling provide
positive control when the work string is picked up to close the
sleeve-valve. Helps prevent seal from pumping out during pumping
operations or tubing test. Snap-out release.
F
Technical Data Sheet 04.04.2012
Stage Collar (Hydraulic/Mechanical)
The Stage Cementing Collar has been designed for stage cementing applications where the operator wants flexibility to open the stage collar either hydraulically or mechanically. The design features two internal sleeves that shift during the stage cementing operations. The bottom sleeve can be shifted open through the use of hydraulic pressure or by dropping an opening dart and allowing it to gravitate to the opening seat. The stage collar can be field set to open hydraulically at different opening pressures. This is achieved through the addition or removal of the shear screws from the stage cementing tool. The changing of the opening pressure does affect the force required to open the stage collar mechanically if an opening bomb is subsequently used. Closing of the stage cementing collar is affected through the pumping of a closing plug behind second stage cement and applying pressure upon completing displacement. The Fangmann stage cementing collar can be ordered for applications for two or three stage cement jobs. It can also be used in liner applications when the closing plug has been adapted to fit the closing seat in the stage collar.
4 N/A 9.800 9.903 13.475 12.630 120.000 400 8 X 0.875" 5,250 2,780 2,000 2,500
9.5 - 11.6 3,975
13.5 -15.1 3,805
11.5 - 15 4,445
15 - 18 4,293
14 - 15.5 4,897
17 - 20 4,835
5 3/4 19.5 - 23 7.350 5.604 10.106 6.507 167.000 400 8 X 0.875" 7,000 5,090 3,625 4,000
20 - 24 5,934
28 - 32 5,675
20 - 26 6,351
29 - 32 6,161
26.4 - 29.7 6,854
33.7 - 39 6,760
8 5/8 28 - 32 5.977 3.351 8.218 3.850 275.000 400 10 X 0.875" 10,125 7,902 6,000 6,760
32.3 - 36 8,855
40 - 53.5 8,689
40.5 - 45.5 9,904
51 - 60.7 9,704
12 3/4 N/A 5.814 3.164 7.993 3.584 440.000 400 12 X 0.875" 14,750 11,886 10,000 10,750
13 3/8 61 - 72 5.717 3.053 7.860 3.427 600.000 400 12 X 0.875" 15,000 12,375 10,500 11,250
10 X 0.875" 12,250 8,000 8,7605.629 2.953 7.739 3.284 375.000 40010 3/4
4,625 5,250
9 5/8 5.440 2.738 7.480 2.978 300.000 400 10 X 0.875" 11,125 6,750 7,760
8 X 0.875" 8,250 4,625 5,250
7 5/8 5.717 3.053 7.860 3.427 225.000 400 8 X 0.875" 9,000
6.236 3.650 8.575 4.271 200.000 4007
3,625 4,000
6 5/8 6.431 3.992 8.842 4.587 190.000 400 8 X 0.875" 8,000 4,375 5,000
8 X 0.875" 6,250 2,875 3,250
5 1/2 8 X 0.875"7.813 6.417 11.033 8.192 160.000 400 6,625
8.232 7.152 11.319 8.711 150.000 4005
4 1/2 8.948 8.408 12.303 15.500 135.000 400 8 X 0.875" 5,750 2,625 3,000
L80 P-110 STAGE TOOL BODY
SIZE (inch)
CASING WEIGHT (lbs./ft.)
MAXIMUM BURST
PRESSURE (psi)
MAXIMUM COLLAPSE PRESSURE
(psi)
MAXIMUM BURST
PRESSURE (psi)
MAXIMUM COLLAPSE PRESSURE
(psi)
LOAD BELOW
THE TOOL (lbs.)
MAX TEMP RATING
(◦F)
CEMENTING PORTS OD (in)
MAX DRILLOUT
ID (in)
OPENING SEAT ID
(in)
CLOSING SEAT ID
(in)
Fangmann Energy Services GmbH & Co. KG Brietzer Weg 10 29410 Salzwedel Germany Tel.: +49 (0)3901 83 63-0 Fax: +49 (0)3901 83 63-28
Hohe Tannen 14 49661 Cloppenburg Germany Tel.: +49 (0)4471 98008-0 Fax: +49 (0)4471 98008-18 www.fangmanngroup.com
F
Technical Data Sheet 22.05.2012
CSTÊÈ CEMENT SUPPORT TOOL When competent plug cementing is an issue.
Propper support of the cementplug is essential for a successful plug placement. With the CSTTM this is no longer a concern, or time consuming.
OVER 95% success rate historically. General information:
• A tough membrane that is spring activated to seal against the open hole or casing. • Supplied ready to run.
• No rental tools involved. • No training required to operate. • Load the CST inside the work string from transport tube.
• Can either be pumped directly ahead of the spacer/cement or placed before the pre-job circulation is started. Features: • Placed at setting depth, and after exiting the pipe, it will fold out and fill the hole.
• The dart displaces the CST and helps prevent contamination in the string. • No other plug support is required as long as formation integrity is adequate.
• Multiple cement plugs can be set with multiple CST’s with only one trip in the hole.
With more than 1000 successful runs, the term òfield provenò should be sufficiently demonstrated.
Operating Envelopes for the CST family
2” M10 2” Slimline CST 2 ½” CST 3”
Min work string ID 2” (50mm)*1 2” (50mm)*1 2 ½”(63mm)*2 3” (76mm)*3
Max work string ID 4” (102 mm) 5” (127 mm) 6” (152 mm) 6 ½” (165mm)
Min hole size ID 6” (152mm) 6” (152mm) 7 ½” (190mm) 8” (203mm)
Max setting ID 10” (250 mm) 16” (400 mm) 20” (500 mm) 42” (1066mm)
Max temperature 180 C (350 F) 180 C (350 F) 180 C (350 F) 180C (350F)
Max pump rate 150 m/min
(500 ft/min)
150 m/min
(500 ft/min)
150 m/min
(500 ft/min)
150 m/min
(500 ft/min)
Max pump rate when exit the work string
50 m/min
(150 ft/min)
50 m/min
(150 ft/min) 50 m/min
(150 ft/min)
50 m/min
(150 ft/min)
Dart info
No of wings
Wing OD
Nose OD
Length
3
125mm/79mm
1,81” (46mm)
390mm
5
132mm/79mm
1,81” (46mm)
630mm
5
132mm/79mm*4
2 3/8” (60mm)
630mm
5
Note * 5 2 3/8” (60mm)
630mm
* 1: Physical Tool OD is 46 mm.
* 2: Physical Tool OD is 60 mm.
* 3: Physical Tool OD is 70 mm
* 4: Dart for 6 5/8” x 3 ½” DP can be ordered separately
* 5: Wing OD: 165mm/132mm/79mm
Perigon
1
2
3
Fangmann Energy Services GmbH & Co. KG Brietzer Weg 10 29410 Salzwedel Germany Tel.: +49 (0)3901 83 63-0 Fax: +49 (0)3901 83 63-28
Hohe Tannen 14 49661 Cloppenburg Germany Tel.: +49 (0)4471 98008-0 Fax: +49 (0)4471 98008-18 www.fangmanngroup.com