double mount -english - 2016 final - dsei.co.uk · depending on the gunners postions, from -10º to...
TRANSCRIPT
DOUBLE MOUNT FOR THE XRGL40® 40mm EXTENDED RANGE GRENADE LAUNCHER
www.rippeleffect.com
The Double Mountis a recoil buffered
soft mount systemspecifically developed
and qualified for the XRGL40® 40mm Extended Range Grenade Launcher.
®
unmatched innovation
DOUBLE MOUNT FOR THE XRGL40® 40mm EXTENDED RANGE GRENADE LAUNCHER
The system can be used as a primary or secondary weapon system for vehicles and boats.
The system allows for very effective firepower in an ambush or fast attack situations.
The Double Mount is a clip-in-clip-out system which allows for the launchers to be mounted and dismounted without any modifications to the launchers or the mount.
Contact details:Fritz VisserEmail: [email protected]: +27-12-803-4347 or mobile: +27-82-881-6181
www.rippeleffect.com
Issue 3: March 2016
®
unmatched innovation
Mass of weapon mount alone 13.7kg
Surface finish Gunkote
Calibre of Launchers 40 x 46mm (low velocity) and 40 x 51mm (medium velocity)
Capacity 12 Rounds
Rate of fire 12 Rounds within 4 seconds
TECHNICAL DATA
CHARACTERISTICS
1. Arc of fire• Gunner’s position 1: up to 180º when mounted on a pintle mount, facing forward on the
vehicle centre line.• Gunner’s position 2: up to 270º when mounted on a swing arm and depending on the
gunners position in the vehicle.
2. ElevationDepending on the gunners postions, from -10º to +75º from horizontal.
3. Elevation and traverse stop Safety feature to limit weapon to a safe arc of fire.
4. Traverse and elevation lock The traverse and elevation lock secures the launchers and mount in a fixed position during
travelling. Three safety position locks, -10º, 0º, +45º.
5. Sighting system The double mount utilizes the same type of reflex sighting system fitted to the XRGL40®. 6. Universal pin interface The mount uses a universal quick release pin that allows for fast installation and removal from
vehicle or boat platform.