door surround brochure - abbey artstone limited - door surrou… · door surround brochure author:...
TRANSCRIPT
ABBEY ARTSTONE
Door SurroundsLightweight entrance features
HEALTH, SAFETY & WELFARE
01
The colours shown are indicativeand colour samples should be requested for a true representationof the products colour
Abbey Artstone Architectural masonry is manufactured in accordance with GRCA Specification. We use naturally occurring aggregates, sand, Portland cement and an integral waterproofer; pigments are added were necessary.
Whereas traditional concrete is classified by its compressive strength, GRC is classified by reference to its characteristic flexural strength, referred to as Modulus of Rupture or MOR).
GRC When tested in accordance with BS1881:Part 116: 1983 and BS1217:1997 and the United Kingdom cast Stone Association, the cast stone was tested over three 150mm cubes giving an average crushing strength well in excess of 50KN/mm2.
All Abbey Artstone Architectural masonry complies with following tolerances unless otherwise agreed in writing by
The maximum permitted variation from plane is 0.03% of the maximum dimension of the item of 3mm whichever is the greater.
The actual dimensions of individual regular units should conform to the stated dimensions subject to the tolerances in our full specification
TECHNICAL DATA
TECHNICAL DATA
COMPOSITION
COMPRESSIVE STRENGTH
MANUFACTURING TOLERANCES
DENSITY
The typical mean density of Abbey Artstone Limited Architectural GRCmasonry is 2000kg/m3
WEATHERINGMany factors influence the way GRC weathers; such as design, exposure, climate and surrounding. All pigments used are colorfast and durable and confirm to BS1014. Abbey Art Stone architectural dressings will weather in a similar manner to natural stone, when exposed to similar conditions.
FIRE RESISTANCEUnits manufactured in accordance GRCA standards and have been tested by Warrington Fire Global Safety. Tested in accordance with EN 13501-1:2007 GRC Reaction to Fire classification: A1Polymer GRC - Reaction to Fire classification: A2-s1, d0
STRUCTURAL USE
All GRC Units are non structural and must not be used in compression. All fixing must be used in accordance with the drawings provided failure to do so will invalidate any product warranty.
The contractor shall ensure that health, safety and welfare measures required or by virtue of the provision of any enactment or regulation or the working rules of the industry are complied with.
Calder (M03), Buff
Portland
Grey
McDonald Red
M08
Bath
COLOURS
Door SurroundsLightweight entrance features
Abbey Artstone's range of lightweight products designed for the construction industry is the only range of postfix lightweight GRC door surrounds available. With our range of GRC door surrounds you have an alternative to traditional precast or GRP door surrounds.
Advantages of GRC over precast and GRP Post fix design reducing the amount of damage that can occur prior to the structure completion. Ultra thin and lightweight units that reduce labour and mechanical lifting (time and cost.) Very little demand on the structure to which it is attached to. Hidden fixing system. High resistance to water absorption. Weathering occurs almost the same as with any precast stone keeping the building constant over time. Low maintenance with no UV light deterioration
We have a wide range of head and jamb combinations to suit all designs, but we can also manufacture to customers specific designs although careful thought should be given to pattern and mould establishment costs and utilization of materials by ensuring you make full use of quantity where possible.
TYPE G Door Head
02 TYPE G HEAD SURROUNDS
DS85
Head type G
Jamb type 11
DS04
Head type G
Jamb type 01
d oor
op e
nin
g up
t o 2
250
mm
270m
m
up to 1730mm opening
2330mm
door
ope
ning
up
t o2325m
m
up to 1780mm opening
2330mm
The type 'G' head caters for the larger openingshould your door have sidelights or is designed for mobili ty and require wheel chair access, youcan st i l l add that extra f inishing touch.
TYPE H Door Head
03TYPE H HEAD SURROUNDS
DS33
Head type H
Jamb type 05
1500mm
688m
m
door
op e
ni n
g up
t o 2
440
mm
up to 940mm opening
DS92
Head type H
Jamb type 10
up to 990mm opening
1500mm
688m
m
door
op e
n in g
up
t o 2
325m
m
The type 'H' head creates a stunning individuallook i t 's curved feature adds height to the surroundand creates a majest ic entrance out of any plain door.
TYPE L Door Head
04 TYPE L HEAD SURROUNDS
The type 'L' head creates a feature out of any doorwaywith i ts detailed moulded edges creating a refined look that would suit any structure and complement any stonework.
DS065
Head type L
Jamb type 01
1697mm267m
m
doo r
op e
ni n
g up
to 2
250m
m
up to 1090mm opening
DS84
Head type L
Jamb type 11
1697mm
door
ope
ni n
g up
to 2
325m
m
up to 1145mm opening
TYPE K Door Head
05TYPE K HEAD SURROUNDS
DS64
Head type K
Jamb type 10
The type 'K' head is simple yet stylish. I t has an angledtop to enable water to run off and can cope with openings up to over 1 metre in length
DS861
Head type K
Jamb type 05
345m
m 1628mm
door
ope
n ing
up
t o 2
440m
m
up to 1010mm opening
1628mm345m
m
up to 990mm opening
door
ope
nin
g u p
to
2325m
m
TYPE M Door Head
06 TYPE M HEAD SURROUNDS
The type 'M' head tastefully detailed in i ts moulding and has a sloped top to allow for water run off .
DS69
Head type M
Jamb type 01
1710mm
195m
m
doo r
ope
n ing
u p t
o 2250m
m
up to 1060mm opening
DS70
Head type M
Jamb type 11
195
mm 1710mm
door
ope
ni n
g up
t o 2
325m
m
up to 1030mm opening
TYPE S Door Head
07TYPE S HEAD SURROUNDS
The type 'S' head a stunning example of what can be created, this head will work on door opening up to over 1 metre in width and gives a surround height and detai led features to enhance the look of your home.
DS88
Head type S
Jamb type 05
doo r
op e
ning
up t
o 2440m
m
up to 1010mm opening
740m
m
1628mm
DS91
Head type S
Jamb type 10
1628mm
740m
m
doo r
op e
nin
g up
to 2
325m
m
up to 990mm opening
ABBEY ARTSTONEWorth Valley Works, Pitt Street, Keighley, West Yorkshire, BD21 4PF
Semi Dry | Wet Cast | Glass Reinforced Concrete | Glass Reinforced Plastic
Company Registration Number : 7529533
Tel. 01535 610964 Fax. 01535 690989 Email. [email protected]