dongfang electric group dongqi investment&development co.,ltd.sealantindia.com/solar silicone...

Dongfang Electric Group Dongqi Investment&Development Co.,Ltd.

Documents for TUV Certification

ADDRESS: 666 West Jinshajiang Road,Deyang City,Sichuan Province,

P.R.China 618201

2010-09-05


Catalogue

01、General information

02、Declaration of conformity

03、Declaration of precondition

04、Schematic electrical connection of cells and strings

05、Dimensions of PV modules

06、Cell and distance without frame drawing

07、Critical component list

08、Data sheet for all module types of family

09、Marking label

10、User manual

11、Annex


General Information 1. Applicant: Dongfang Electric Group Dongqi Investment&Development Co.,Ltd.

Address: 666 West Jinshajiang Road,Deyang City,Sichuan Province,P.R. China 618201

2.Manufacturer/Factory1: Dongfang Electric (Jiuquan) Solar Power Engineering

Technology Co., Ltd.

Address: Western Section, High-tech Zone, Jiuquan, Gansu Province

Manufacturer/Factory 2 : Dongfang Electric (Yixing) Magi Solar Technology Co.,Ltd.

Address:Wenzhuang Rd.6,yixing Jiangsu 214203,china

3. Type Designation Series: DQPVM240M5-96Series:DQPVM220M5-96,DQPVM225M5-96,DQPVM230M5-96,

DQPVM235M5-96,DQPVM240M5-96,DQPVM245M5-96,

DQPVM250M5-96,DQPVM255M5-96, DQPVM260M5-96

DQPVM185M5-72Series:DQPVM170M5-72,DQPVM175M5-72,DQPVM180M5-72,

DQPVM185M5-72,DQPVM190M5-72,DQPVM195M5-72 ,

DQPVM200M5-72

DQPVM90M5-36Series: DQPVM85M5-36,DQPVM90M5-36,DQPVM95M5-36

DQPVM275P6-72Series: DQPVM250P6-72,DQPVM255P6-72,DQPVM260P6-72,

DQPVM265P6-72,DQPVM270P6-72,DQPVM275P6-72,


DQPVM295P6-72,DQPVM300P6-72

DQPVM230P6-60Series:DQPVM210P6-60,DQPVM215P6-60,DQPVM220P6-60,


DQPVM240P6-60,DQPVM245P6-60, DQPVM250P6-60

DQPVM210P6-54Series:DQPVM190P6-54,DQPVM195P6-54,DQPVM200P6-54,


DQPVM220P6-54, DQPVM225P6-54,DQPVM230P6-54





DQPVM300M6-72,DQPVM305M6-72







4. Contact Person: Mr.Lei Kai (雷凯)


666 West Jinshajiang Road,Deyang City,Sichuan Province,P.R.China 618201

TEL:+86-838-2685437

FAX:+86-838-2688066

Email: [email protected].

mailto:[email protected]


Declaration of Conformity

We (Dongfang Electric Group Dongqi Investment&Development Co.,Ltd.) declare that test samples ( DQPVM240M5-96, DQPVM185M5-72, DQPVM90M5-36, DQPVM275P6-72, DQPVM230P6-60, DQPVM210P6-54, DQPVM280M6-72, DQPVM230M6-60,DQPVM210M6-54) are built with identical materials, components and production parameters as the modules of the type family also covered by the certificate but not tested(DQPVM220M5-96,DQPVM225M5-96,DQPVM230M5-96,DQPVM235M5-96,DQPVM245M5-96,DQPVM250M5-96,DQPVM255M5-96,DQPVM260M5-96； DQPVM170M5-72,DQPVM175M5-72,DQPVM180M5-72,DQPVM190M5-72, DQPVM195M5-72,DQPVM200M5-72； DQPVM85M5-36, DQPVM95M5-36； DQPVM250P6-72,DQPVM255P6-72,DQPVM260P6-72,DQPVM265P6-72, DQPVM270P6-72,DQPVM280P6-72,DQPVM285P6-72,DQPVM290P6-72, DQPVM295P6-72,DQPVM300P6-72； DQPVM210P6-60,DQPVM215P6-60,DQPVM220P6-60,DQPVM225P6-60, DQPVM235P6-60, DQPVM240P6-60, DQPVM245P6-60,DQPVM250P6-60； DQPVM190P6-54,DQPVM195P6-54,DQPVM200P6-54,DQPVM205P6-54, DQPVM215P6-54, DQPVM220P6-54,DQPVM225P6-54,DQPVM230P6-54; DQPVM255M6-72,DQPVM260M6-72,DQPVM265M6-72,DQPVM270M6-72, DQPVM275M6-72,DQPVM285M6-72,DQPVM290M6-72,DQPVM295M6-72, DQPVM300M6-72, DQPVM305M6-72； DQPVM210M6-60,DQPVM215M6-60,DQPVM220M6-60,DQPVM225M6-60, DQPVM235M6-60, DQPVM240M6-60,DQPVM245M6-60, DQPVM250M6-60； DQPVM190M6-54,DQPVM195M6-54,DQPVM200M6-54,DQPVM205M6-54, DQPVM215M6-54,DQPVM220M6-54,DQPVM225M6-54, DQPVM230M6-54.


2010.09.05


Declaration of Precondition

We (Dongfang Electric Group Dongqi Investment&Development Co.,Ltd.) declare that all test samples have already been preconditioned with an irradiation dose of 5-5.5kWh/m2 in open circuit conditions.


2010.09.05


●Schematic electrical connection of cells and strings

DQPVM240M5-96 Series： Connector

Diode

Cells

DQPVM185M5-72 Series：

Connector

Diode

Cells



Connector

Diode

Cells

DQPVM275P6-72 / DQPVM280M6-72Series：

Connector

Diode

Cells


DQPVM230P6-60 / DQPVM230M6-60 Series：

Connector

Diode

Cells

DQPVM210P6-54/ DQPVM210M6-54 Series：

Connector

Diode

Cells


● Structure with identification of each sheets thickness (incl. solar cell

thickness)

Glass 3.2mm

EVA 0.5mm

EVA 0.5mm TPT 0.32mm

Mono-Si Cell 0.19±0.02mm Poly-Si Cell 0.20±0.03mm

● Dimensions of PV Module (Unit: mm)


II

I

9

14

2

2

3.5

8

8

3.5

70

70 70

70

7.5

8

Section A-A

50

35

条形码

1065±1

1580±

1

I

positive ( + )negative ( - )

100

60±1

4mm2

PV Junction Box

900

532.5±1

Connector

Grounding holes

Mounting holes

标签

Label

Junction Box

AA

Ⅱ

2-φ4

50±1

1015±1

10±0.5

800

1300



II

I

9

14

2

2

3.5

8

8

3.5

70

70 70

70

7.5

8

Section A-A

45

35

Ⅱ


100

AA

4mm2

PV Junction Box

45±1

Label

900

(404)

Junction Box

Connector

Grounding holes

Mounting holes

标签

808±1

1580±

1

I

条形码

758±1

6

2-φ4

10±0.5

800±

1

1300±

1

60±

1


2-? 4

503±1

A A

II

10±0.5


65

Label

900

Junction Box

Connector

标签

6

60±1

II

I

9

14

2

2

3.5

8

8

3.5

70

70 70

70

7.5

8

Section A-A

35

35

I

276.5±1

800±1

序列号

1200±1

553±135±1


DQPVM275P6-72 Series：

II

9

14

2.5

2.5

3.5

8

8

3.5

70

70 70

70

7.5

8

Section A-A

50

35

I

条形码

1957±1

992±1 50±1

I


100

4mm2

PV Junction Box

Label

900

Junction Box

Connector

标签

6

Grounding holes

496±1

1300±1

800±

1

Ⅱ

Mounting holes

942±1

A

2-φ4 10±0.5

60±1


II

I

9

14

2

2

3.5

8

8

3.5

70

70 70

70

7.5

8

Section A-A

50

35

992±1

1650±

1

I

Ⅱ

Mounting holes

AA


100

4mm2

PV Junction Box

Label

900

Junction Box

Connector

Grounding holes

标签

660±

1

496±150±1

2-φ4

942±1

条形码

10±0.5

800

±1

1300±

1



Section A-A

II

I

9

14

2

2

3.5

8

8

3.5

70

70 70

70

7.5

8

8

50

35

992±1

1482±

1

50±1Ⅱ

Mounting holes

AA


100

4mm2

PV Junction Box

Label

900

Junction Box

Connector

Grounding holes

标签

660±1

496±1

2-φ4

942±1

条形码

10±0.5

380±1

1080±

1

I


1957

±1

992±1

条形码

II

I

9

14

50±1


100

IP65

4mm2

PV Junction Box

Label

900

Junction Box

Connector

标签

6

Grounding holes

496±11300

±1

800±1

Mounting holes

942±1

A

2-φ4 2

2

3.5

8

8

3.5

70

70 70

70

7.5

8

10±0.5

R4.5

Section A-A

50

35

Ⅱ

I

60±

1



992±1

1650±

1

条形码条形码

Mounting holes

AA


100

Label

900

Junction Box

Connector

Grounding holes

标签

660±

1

496±150±1

2-φ4

942±1

10±0.5

800±

1

130

0±1

II

I

9

14

2

2

3.5

8

8

3.5

70

70 70

70

7.5

8

R4.5

Section A-A

50

35

I

Ⅱ


条形码

992±1

1482±1

50±1

Mounting holes

AA


100

IP65

4mm2

PV Junction Box

Label

900

Junction Box

Connector

Grounding holes

标签

660±

1

496±1

2-φ4

942±1

10±0.5

380±

11080±

1

II

I

9

14

R4.5

Section A-A

50

35

I

II

2

2

3.5

8

8

3.5

74

74 78

78

7.5

8


●Cell and edge distances


26±1

3±

1

2±0.5

1574±1

1058±

1

26±1

75±

1

35±

1

3±1

18.5±

1

18.5±

1

条形

码

3±1

9±1

14±1


1574±1

802

±1

26±1

18.5±

1

26±1

18.

5±1

3±1

3±1

2±0.5

3±1

15±

155±

1



546±1

26±1

18.5±1

26±1

18.5±1

序列号

2±0.5

3±

1

1193±1

3±1

3±1

5±1

15±1

55±1


条形

码

21±

1

75±1

985±

1

2±0.528±1

17±

1

5±1

28±1

3±

1

5±1

1950±1

17±1



条形码

21±

175±

1

1643±1

985±

1

2±0.5 32.5±1

17±1

17±1

32.5±1

3±1

5±1

5±1


条形码

1475±1

27.5±1 27.5±1

5±1

3±

1

2±0.5

17±1

5±1

21±1

75±

1

-

+

27.5±1

17±

1

985±1


DQPVM280M6-72 Series：条形码

1950±1

985±1

5±1

21±1

75±1

28±1

28±117±1

17±

1

2±0.5

5±1

3±

1


条形

码

21±

1

75±1

1643±1

985±

1

2±0.5 32.5±1

17±1

17±1

32.5±1

3±1

5±1

5±1



条

形码

21±

1

75±

1

2±0.5 27.5±1

17±

1

17±1

5±1

27.5±1

5±1

985±

1

1475±1

3±1


●Technimcal specification and data sheets of the used components/materials


Items Components/objects Type or spec Quantity Manufacturer

1 Cells 125×125×0.19mm 96 DONGFANG ELECTRIC (YIXING)

MAGI SOLAR POWER TECHNOLOGY CO.,LTD.

2 Soldering strip 0.15×2mm 208 Shanghai SunBy Solar Technology Co.,

Ltd.

3 Internal bus 0.2×6mm 14 Shanghai SunBy Solar Technology Co.,

Ltd.

4 Glass 1574×1058×3.2mm 1 Tianjin Seedglass Co., Ltd.

5 Back sheet 1584×1068×0.32mm 1 FILMCUTTER

6 EVA S11，1584×1068×0.5mm 2 Bridgestone Corporation

7 Junction box PV- ZH008 1 Ningbo Zhonghuan Electrical


8 Bypass diode 10SQ050 4 Pan Jit International Inc

9 Cable PV1-F,1×4mm2，L=900mm 2 Wuxi Xinhongye Wire & Cable Co., Ltd.

10 Connector PV- ZH202 1set Ningbo Zhonghuan Electrical


11 Al frame Anodized Aluminum frame

6063 T5, 1580×50×35mm

2 Jiangyin haida


6063 T5, 1065×50×35mm

2 Jiangyin haida

13 Al Corner bonder 40.2×40.2 mm 4 Jiangyin haida

14 Isolation with Back sheet

970×105×0.32mm 1 FILMCUTTER

15 Isolation with EVA S11，980×115×0.5mm 1 Bridgestone Corporation

16 adhesive Guibao 888 300ml Chengdu Guibao Science and Technology

Co., Ltd.


DQPVM 185M5-72 Series：





Ltd.


Ltd.




7 Junction box PV-ZH008 1 Ningbo Zhonghuan Electrical Technology

Co., Ltd.



10 Connector PV-ZH202 1set Ningbo Zhonghuan Electrical Technology

Co., Ltd.


6063 T5, 1580×45×35mm

2 Jiangyin haida


6063 T5, 808×45×35mm

2 Jiangyin haida






Co., Ltd.







Ltd.


Ltd.





Co., Ltd.




Co., Ltd.


6063 T5, 1200×35×35mm

2 Jiangyin haida


6063 T5, 553×35×35mm

2 Jiangyin haida






Co., Ltd.


DQPVM 275P6-72 Series：





Ltd.


Ltd.




7 Junction box PV-ZH010 1 Ningbo Zhonghuan Electrical





Co., Ltd.


6063 T5, 1957×50×35mm

2 Jiangyin haida


6063 T5, 992×50×35mm

2 Jiangyin haida






Co., Ltd.







Ltd.


Ltd.





Co., Ltd.




Co., Ltd.


6063 T5, 1650×50×35mm

2 Jiangyin haida


6063 T5, 992×50×35mm

2 Jiangyin haida






Co., Ltd.







Ltd.


Ltd.


5 Back sheet 1485×995×0.32mm 1 KREMPEL GROUP



Co., Ltd.




Co., Ltd.


6063 T5, 1482×50×35mm

2 Jiangyin haida


6063 T5, 992×50×35mm

2 Jiangyin haida






Co., Ltd.







Ltd.


Ltd.









Co., Ltd.


6063 T5, 1957×50×35mm

2 Jiangyin haida


6063 T5, 992×50×35mm

2 Jiangyin haida






Co., Ltd.






2 Soldering strip 0.18×2mm 132 Shanghai SunBy Solar Technology

Co., Ltd.

3 Internal bus 0.2×6mm 11 Shanghai SunBy Solar Technology

Co., Ltd.







9 Cable PV1-F,1×4mm2，L=900mm 2 Wuxi Xinhongye Wire & Cable Co.,

Ltd.

10 Connector PV-ZH202 1set Ningbo Zhonghuan Electrical



6063 T5, 1650×50×35mm

2 Jiangyin haida


6063 T5, 992×50×35mm

2 Jiangyin haida





16 adhesive Guibao 888 255ml Chengdu Guibao Science and








Ltd.


Ltd.





Co., Ltd.




Co., Ltd.


6063 T5, 1482×50×35mm

2 Jiangyin haida


6063 T5, 992×50×35mm

2 Jiangyin haida






Co., Ltd.


Date sheet for all module types of the family


Parameters DQPVM220M5-96 DQPVM225M5-96 DQPVM230M5-96 DQPVM235M5-96 DQPVM240M5-96 DQPVM245M5-96 DQPVM250M5-96 DQPVM255M5-96 DQPVM260M5-96

Peak power Pm(W) 220±5% 225±5% 230±5% 235±5% 240±5% 245±5% 250±5% 255±5% 260±5% Open circuit voltage Voc(V) 58.0 58.0 58.6 58.6 59.2 59.2 59.8 59.8 60.1 Max. power voltage Vmp(V) 47.5 47.5 48.0 48.0 48.5 48.5 49.0 49.0 49.1 Max. power current Imp(A) 4.63 4.74 4.79 4.89 4.95 5.05 5.10 5.20 5.30 Short circuit current Isc(A) 5.00 5.07 5.15 5.23 5.32 5.45 5.51 5.62 5.72 Dimensions(L*W*H) 1580*1065*50 Weigh(kg) 21.5 Max. over-current (A) 10 Max. system voltage (V) 1000V DC Application Class Class A Mono crystalline silicon solar cell 125*125*0.19mm No. of cells and connections 96 series No. of bypass diodes 4 Bypass diode rating (A) 10 Bypass diode max. junction

temperature(℃) 200

Bypass diode thermal

resistance(℃/W) 3.0

STC Irradiance:1000W/m2,Cell temperature:25℃,AM:1.5



Parameters DQPVM170M5-72 DQPVM175M5-72 DQPVM180M5-72 DQPVM185M5-72 DQPVM190M5-72 DQPVM195M5-72 DQPVM200M5-72

Peak power Pm(W) 170±5% 175±5% 180±5% 185±5% 190±5% 195±5% 200±5%

Open circuit voltage Voc(V) 43.3 43.3 43.9 43.9 44.5 44.5 44.5

Max. power voltage Vmp(V) 35.5 35.5 36.0 36.0 36.5 36.5 36.5

Max. power current Imp(A) 4.79 4.93 5.00 5.14 5.21 5.34 5.48

Short circuit current Isc(A) 5.08 5.23 5.30 5.45 5.52 5.77 5.92

Dimensions(L*W*H) 1580*808*45

Weigh(kg) 15.5

Max. over-current (A) 10

Max. system voltage (V) 1000V DC

Application Class Class A Mono crystalline silicon solar

cell 125*125*0.19mm

No. of cells and connections 72 series

No. of bypass diodes 3

Bypass diode rating (A) 10 Bypass diode max. junction






DQPVM90M5-36 Series:

Parameters DQPVM85M5-36 DQPVM90M5-36 DQPVM95M5-36

Peak power Pm(W) 85±5% 90±5% 95±5%

Open circuit voltage Voc(V) 22.0 22.6 23.2

Max. power voltage Vmp(V) 18.0 18.5 19.0

Max. power current Imp(A) 4.72 4.86 5.00

Short circuit current Isc(A) 5.10 5.25 5.40


Weigh(kg) 7.5



Application Class Class A

Mono crystalline silicon solar cell 125*125*0.19mm

No. of cells and connections 36series


Bypass diode rating (A) 10

Bypass diode max. junction temperature( )℃ 200 Bypass diode thermal resistance( /W)℃ 3.0

STC Irradiance:1000W/m2,Cell temperature:25 ,AM:1.5℃



Parameters DQPVM250P6-72 DQPVM255P6-72 DQPVM260P6-72 DQPVM265P6-72 DQPVM270P6-72 DQPVM275P6-72 DQPVM280P6-72 DQPVM285P6-72 DQPVM290P6-72 DQPVM295P6-72 DQPVM300P6-72

Peak power Pm(W) 250±5% 255±5% 260±5% 265±5% 270±5% 275±5% 280±5% 285±5% 290±5% 295±5% 300±5% Open circuit voltage

Voc(V) 43.4 43.4 43.4 44.0 44.0 44.0 44.6 44.6 44.6 45.3 45.3

Max. power voltage

Vmp(V) 35.0 35.0 35.0 35.5 35.5 35.5 36.0 36.0 36.0 36.5 36.5

Max. power current

Imp(A) 7.14 7.29 7.43 7.46 7.61 7.75 7.78 7.92 8.05 8.08 8.22

Short circuit current Isc(A) 7.71 7.87 7.95 8.06 8.14 8.30 8.40 8.55 8.61 8.72 8.79 Dimensions(L*W*H) 1957*992*50 Weigh(kg) 22.5 Max. over-current (A) 15 Max. system voltage (V) 1000V DC Application Class Class A Mono crystalline silicon

solar cell 156*156*0.2mm

No. of cells and

connections 72series

No. of bypass diodes 6 Bypass diode rating (A) 10 Bypass diode max.

junction temperature(℃)200






Parameters DQPVM210P6-60 DQPVM215P6-60 DQPVM220P6-60 DQPVM225P6-60 DQPVM230P6-60 DQPVM235P6-60 DQPVM240P6-60 DQPVM245P6-60 DQPVM250P6-60

Peak power Pm(W) 210±5% 215±5% 220±5% 225±5% 230±5% 235±5% 240±5% 245±5% 250±5%

Open circuit voltage Voc(V) 36.0 36.0 36.0 36.6 36.6 37.2 37.2 37.2 37.8

Max. power voltage Vmp(V) 29.0 29.0 29.0 29.5 29.5 30.0 30.0 30.0 30.5

Max. power current Imp(A) 7.24 7.41 7.59 7.63 7.80 7.83 8.00 8.17 8.20

Short circuit current Isc(A) 7.82 8.01 8.19 8.24 8.42 8.46 8.65 8.74 8.85


Weigh(kg) 19.5




cell 156*156*0.2mm

No. of cells and connections 60 series








DQPVM210P6-54 Series:

Parameters DQPVM190P6-54 DQPVM195P6-54 DQPVM200P6-54 DQPVM205P6-54 DQPVM210P6-54 DQPVM215P6-54 DQPVM220P6-54 DQPVM225P6-54 DQPVM230P6-54

Peak power Pm(W) 190±5% 195±5% 200±5% 205±5% 210±5% 215±5% 220±5% 225±5% 230±5%



Max. power current Imp(A) 7.31 7.50 7.55 7.74 7.78 7.96 8 8.18 8.21

Short circuit current Isc(A) 7.81 7.95 8.08 8.28 8.32 8.52 8.64 8.83 8.86


Weigh(kg) 17.5




cell 156*156*0.2mm

No. of cells and connections 54series









Parameters DQPVM255M6-72 DQPVM260M6-72 DQPVM265M6-72 DQPVM270M6-72 DQPVM275M6-72 DQPVM280M6-72 DQPVM285M6-72 DQPVM290M6-72 DQPVM295M6-72 DQPVM300M6-72 DQPVM305MP6-72

Peak power Pm(W) 255±5% 260±5% 265±5% 270±5% 275±5% 280±5% 285±5% 290±5% 295±5% 300±5% 305±5% Open circuit voltage Voc(V) 43.6 43.6 44.3 44.3 44.3 44.9 44.9 44.9 45.5 45.5 45.5

Max. power voltage Vmp(V) 35.2 35.2 35.7 35.7 35.7 36.2 36.2 36.2 36.7 36.7 36.7

Max. power current Imp(A) 7.24 7.38 7.42 7.56 7.70 7.74 7.87 8.01 8.04 8.17 8.31 Short circuit current Isc(A) 7.82 7.95 8.02 8.16 8.31 8.36 8.50 8.65 8.68 8.83 8.98 Dimensions(L*W*H) 1957*992*50 Weigh(kg) 22.5 Max. over-current (A) 15 Max. system voltage (V) 1000V DC Application Class Class A Mono crystalline silicon solar

cell 156*156*0.2mm

No. of cells and connections 72series No. of bypass diodes 6 Bypass diode rating (A) 10 Bypass diode max. junction








Peak power Pm(W) 210±5% 215±5% 220±5% 225±5% 230±5% 235±5% 240±5% 245±5% 250±5% Open circuit voltage Voc(V) 36.2 36.2 36.2 36.8 36.8 37.4 37.4 37.4 38.1


Max. power current Imp(A) 7.19 7.36 7.50 7.58 7.69 7.78 7.94 8.11 8.15 Short circuit current Isc(A) 7.77 7.95 8.11 8.18 8.30 8.40 8.58 8.76 8.80 Dimensions(L*W*H) 1650*992*50 Weigh(kg) 19.5 Max. over-current (A) 15 Max. system voltage (V) 1000V DC Application Class Class A Mono crystalline silicon solar

cell 156*156*0.2mm









Peak power Pm(W) 190±5% 195±5% 200±5% 205±5% 210±5% 215±5% 220±5% 225±5% 230±5%



Max. power current Imp(A) 7.25 7.44 7.49 7.67 7.72 7.9 7.94 8.12 8.30 Short circuit current Isc(A) 7.76 7.96 8.01 8.21 8.26 8.45 8.50 8.69 8.88 Dimensions(L*W*H) 1482*992*50 Weigh(kg) 17.5 Max. over-current (A) 15 Max. system voltage (V) 1000V DC Application Class Class A Mono crystalline silicon solar

cell 156*156*0.2mm







● Label





DQPVM230M6-60Series：



●Serial Number

20100820 0001

20100820: the module production date

0001: the number of production components


Installation Manual

Please read this manual carefully before installing and using the modules.

It is the great honor to provide you with our PV modules. In order to enable the

PV module to be installed correctly and to generate electric power properly,

please read the following operation instruction carefully.

1. Warning: 1. Artificially concentrated sunlight shall not be directed on the module or panel. 2. Application class is class A.

3. Fire resistant roof covering is Class C. 4. Modules rated for use in this application class may be used in systems operating at greater than 50V DC or 240W, where general contact access is anticipated. Modules qualified for safety through this part of IEC61730 and IEC61730-2 and within this application class are considered to meet the requirements for safety class .Ⅱ

5. Under normal conditions, a photovoltaic module is likely to experience conditions that produce more current and/or voltage than reported at standard test conditions. Accordingly, the value of Isc and Voc marked on this module should be multiplied by of 1.25 when determining component voltage ratings, conductor current ratings, fuse sizes, and size of controls connected to the PV output. 6. Do not touch live terminals with bare hands. Use insulated tools for electrical connections. 7. To reduce the risk of electrical shock or burns, modules may be covered with an opaque material during installation to avoid shocks or burns. 8. The installation work of the PV array can only be done under the protection of sun-sheltering covers or sunshades and only qualified person can install or perform maintenance work on this module. 9. Follow the battery manufacture’s recommendations if batteries are used with modules. 10. All instructions should be read and understood before attempting to install, wire, operate and maintain the module.


11. If instructions are provided allowing modules to be installed in parallel electrically, the installation instructions shall specify that each module (or series string of modules so connected) shall be provided with the maximum series fuse.

2. Unpacking

After the PV module has been shipped to the installation site all of the parts

should be unpacked properly with care.

Caution: The condign environment for unpacking the modules and all other

apparatus should be proofed against dampness and rainfall.

3. Preparation before Installation:

1. Optical check before installation, to make sure there is no bug in the packing

and junction box as well as the surface of module.

2. Check the series number

3. Check the solar cell modules with irradiance of more than 600W/m2 and get

the voltage. In case the voltage is ZERO, it should NOT be installed and

please contact the supplier.

4. Tools & Material for Installation

Screwdriver①

Clamp②

Each mounting hole matches with a se③ t of a screw, a nut and two washer, all

made of stainless iron.

The users should design and build metallic bracket for installing and bearing ④

the weight of the PV modules. The brackets are specially designed for users’

installation places such as the open land or on the roof of houses.

Caution: To avoid damage from flooding and other unpredictable events, and

avoid heavy impact. To design a gradient angle facing the sun radiation direction

in order to insure the full sunshine receives as much as possible.


4. Installation and operation

1. Systems should be installed by qualified personnel only and at least two

persons. The system involves electricity, and can be dangerous if the personnel

are not familiar with the appropriate safety procedures.

2. Do not step on the module.

3. Although modules are quite rugged, the glass can be broken (and the module

will no longer work properly) if it is dropped or hit by tools or other objects.

4. Put the solar cell modules on the frame and put on the screws and then

combine them firmly after put on all the washers. All the screw caps should be

finished on the frame together firmly. The module frame is made of anodized

aluminum, and therefore corrosion can occur if the module is subject to a

salt-water environment with contact to a rack of another type of metal.

(Electrolysis Corrosion) if required. PVC or stainless steel washers can be

placed between the solar module frame and support structure to prevent this

corrosion.

5. The solar module frame must be attached to a support structure using M8

stainless steel hardware of four (4) places symmetrical on the

DQPVM90M5-36 Series solar module and attached to a support structure

using M8 stainless steel hardware of eight (8) places symmetrical on the other

solar module. The stainless steel hardware used for securing the module frame

should secure with an applied torque of 6 foot-pounds (8 Newton-meters).

The recommended standoff height is 20 cm. If other mounting means are

employed this may affect the TUV Listing or the fire class ratings, the incline

angle α to be adjusted according to local condition.


1、 Stainless steel M8 nut 2、 Stainless steel washer 3、 Stainless steel M8 t-head bolt The module has been evaluated by TUV for mounting using the 8 provided mounting holes in the frame. 6．Way of grounding: All module frames should be grounded for safety. The grounding connections between modules must be approved by a qualified electrician, the grounding itself must be made by a qualified electrician. The ground wire should be at least the same size as the electrical conductors, ground wires no less than 12AWG are recommended.

1. Stainless steel M4 nut

2. Stainless steel serrated washer 3. Stainless steel washer 4. Stainless steel cupped-shape washer

2

1 5

3

4

WASHER

4

3

A

A

1 32

5. Stainless steel M4 t-head bolt

7. Module support structures that are to be used to support modules should be


wind rated and approved for use by the appropriate local and civil codes prior

to installation.

8. When solar modules are used to charge batteries, the battery must be installed

in a manner, which will protect the performance of the system and the safety of

its users. Follow the battery manufacturer’s guidelines concerning installation,

operation and maintenance recommendations. In general, the battery (or

battery bank) should be away from the main flow of people and animal traffic.

Select a battery site that is protected from sunlight, rain, snow, debris, and is

well ventilated. Most batteries generate hydrogen gas when charging, which

can be explosive. Do not light matches or create sparks near the battery bank.

When a battery is installed outdoors, it should be placed in an insulated and

ventilated battery case specifically designed for the purpose.

9. In most applications, PV modules should be installed in a location where they

will receive maximum sunlight throughout the year. In the Northern

Hemisphere, the modules should typically face south, and in the Southern

Hemisphere, the modules should typically face north. Modules facing 30

degrees away from true South (or north) will lose approximately 10 to 15

percent of their power output. If the module faces 60 degrees away from true

South (or North), the power loss will be 20 to 30 percent. When choosing a site,

avoid trees, buildings or obstructions, which could cast shadows on the solar.

5. Wiring and Connection:

1. Before this procedure, please read the operation instructions of the PV control

system carefully.

2. The cable diameter is 4mm2，type is PV1-F, 1*4.0mm2.Max. Temperature at

conductor is 120℃, Ambient Temperature is -40℃~+90℃. Manufacturer is Wuxi

Xinhongye Wire & Cable Co., Ltd.


3.The connector type is PV-ZH202. Ambient Temperature is -40℃~+85℃.

Manufacturer is Ningbo Zhonghuan Electrical Technology Co., Ltd.

4. The bypass diode type is 10SQ050, Manufacturer is Pan Jit International Inc

Partial shading of an individual module can cause a reverse voltage across the

shaded module. Current is then forced through the shaded area by the other

modules.

When a bypass diode is wired in parallel with the series string, the forced

current will flow through the diode and bypass the shaded module, thereby

minimize module heating and array current losses. Diodes are used as bypass

diodes.

Have a Rated Average Forward Current 10A .Above maximum system

current at highest module operating temperature.

Have a Rated Repetitive Peak Reverse Voltage 50V. Above maximum system

voltage at lowest module operating temperature.

5. When designing the system, we recommend that the maximum number of

modules in parallel should be no more than four while the maximum number of

modules in series no more than eight.

6. Make wiring by Multi-connecting cables between the PV modules in series or

parallel connection, which is determined by user’s configuration requirement

for system power, current and voltage.

7. Open the connection box of the control system and connect the cabled from the

PV arrays to the connection box in accordance with the installation indication

of the PV control systems.

8. All module frames and mounting racks must be properly grounded in

accordance with local and national electrical codes.

9. Follow the requirements of applicable local and national electrical codes.


6. Maintenance and Care:

1. A built up of dust or dirt on the module(s) front face will result in a decreased

energy output. Clean the panel(s) preferably once per annum if possible

(dependant on site conditions) using a soft cloth dry or damp, as necessary.

2. Never use abrasive material under any circumstances.

3. Examine the PV module(s) for signs of deterioration. Check all wiring for

possible rodent damage, weathering and that all connections are tight and

corrosion free. Check electrical leakage to ground.

4. Check fixing screws and mounting brackets are tight, adjust and tighten as

necessary.


666 West Jinshajiang Road,Deyang City,Sichuan Province,P.R.China

618201

TEL: +86-838-2685437

FAX: +86-838-2688066


Appended index 1. Copy of certificate of junction box

2. Test report for PYE according to IEC 60664-1 Annex1:


Annex 2:


Annex 3:


Annex 4:


Annex 5: