don’t scrap itstrip it! - strip technology inc. · call us toll free: 800.426.4126 e-mail us:...
TRANSCRIPT
Don’t Scrap It.....Strip It!
Call us Toll Free: 800.426.4126 E-mail us: [email protected] Visit us on the Web: www.striptec.com
Let the Strip-Tec Model 1000 Wire
Stripper turn your scrap copper/
aluminum wire into cold hard cash.
Will strip wire from 1/16 to 1 inch OD.
1 HP, 110 Volt, Single Phase Motor
can be used virtually anywhere.
Just plug in and start profiting. It’s
almost like printing your own money!
Light weight and portable. Move
from one job site to the next with no
inconvenience.
Little to no adjusting is needed.
Simply raise or lower top blade with
handwheel for different insulation
thicknesses.
Blades are machined from a solid
alloy steel shaft and heat treated to
last for years.
GEAR driven! Has the power to strip
even the most difficult wire.
Self Feeding! Insert the wire and it
comes out the other side stripped.
Strip any length of wire! Short runs, or
off of the reels. This machne has the
POWER!
All parts are manufactured at our Fort
Worth, TX Facility.
#2572.indd 1 2/27/06 9:10:00 AM
Turn your scrap copper/
aluminum wire into cold hard
cash.
The latest addition to
Strip-Tec’s range of production
wire strippers. Designed
specifically for electricians,
electrical contractors, and
individuals with surplus wire on
hand. This machine is light weight
and portable. Pre-machined holes
for fastening safely to a work
bench.
Strip-Tec was founded by Bill
Alexander, Sr. and now run by
his immediate family, Ronnie,
Bobby and Bill Alexander Jr.,
Strip Technology is based on the
family’s tradition of quality at a
reasonable price.
Driven by the demand to conserve
and noting that our world only
has a finite amount of raw
materials, Strip Technology was
born. Recycling is not only smart,
in that it conserves resources,
but it’s also profitable, because
raw materials are not needed to
produce an end product that you
can recover. There is no pollution,
no hazardous byproducts and no
manufacturing labor involved.
We are dedicated to you, the
customer. Our company’s
no nonsense approach and
‘esprit de corp’ attitude of our
employees only enhance the kind
of workmanship we place into
everything we manufacture.
Strip Technology has 3 patented
wire strippers on the market today.
Technical Data
Motor: 1 HP, 110 Volt, Single PhaseProduction: 50 Feet per minuteCapacity: 1/16” to 1”OD wire
Length: 30”Width: 18”Height: 18”Weight: 105 lbs
Proudly made in the United States!
#2572.indd 2 2/27/06 9:10:11 AM