domestic fan catalogue - simx · compare centrifugal against axial fan performance: 100mm (axial)...
TRANSCRIPT
IP Rating Guide 1
Extraction Selection 2
Vent-Axia Lo Carbon Wall/Ceiling Mounted Fans 9
Manrose Pro-Series Wall/Ceiling Mounted Fans 10
Manrose Classic Wall/Ceiling Mounted Fans 12
Manrose Classic Wall/Ceiling Fans 14
Manrose Classic Thru Wall Fan Kits 14
Simx WhisperVent Centrifugal Ceiling Fans 16
Manrose Classic Multi-Vent Fans 18
Manrose Classic Wall Fan 18
Manrose Pro-Series Thru Wall Mounted Fan Kits 20
Manrose Classic Thru Wall Mounted Fan Kits 22
Manrose Classic Window Mounted Fans 24
Manrose Classic Window Commercial Fans 26
Manrose Designer Series LED Heat/Fan/Light Kits 28
Manrose Pro-Series Heat/Fan/Light Kits 30
Manrose Classic Heat/Fan/Light Kit 30
Manrose Classic Heat/Light Kit 30
Pro-Series Inline Mounted Fan Kits 32
Manrose Pro-Series Inline Mounted Fans Kits 34
Manrose Classic Inline Mounted Fan Kits 36
Manrose Pro-Series Inline Fan/Light Kits 38
Manrose Classic Inline Fan/Light Kits 40
Pro-Series Inline Mixed Flow Fans 42
Manrose Pro-Series Inline Whisper Fan 44
Manrose Classic Inline Hyper Fan 44
Manrose Classic Inline Axial Fans 46
Eco Inline Axial Fans 46
Manrose Classic Inline Centrifugal Fans 48
Simx Inline Centrifugal 3 Speed Fans 49
Simx Inline Centrifugal Fans High Performance 50
Simx Inline Centrifugal Fans WhisperVent 52
BAP Plate Mounted Axial Extract Fan 54
BRC-Q Roof Mounted Centrifugal Extract 56
BRA Roof Mounted Axial Fan Side Discharge 58
BRM-Q Roof Mounted Centrifugal Extract Fan Vertical 60
K-Series Inline Centrifugal Fans 62
Vent-Axia Inline Mixed Flow Fans 64
Simx External Wall Mounted Fans 66
Thru-Roof Mounted Fans 68
Vent-Axia Hand Dryers 72
Manrose Classic Hand Dryers 72
High Speed Dryer 74
Hand Dryer 74
Specialised Fans 78
Fan Timer 77
Electronic Transformer 77
Isolating Transformers 77
Fan Accessories 78
Speed Controllers 78
Fan Mounting Brackets 78
TABLE OF CONTENTSFANS
1
PROTECTED AGAINST SOLIDS PROTECTED AGAINST LIQUIDS
IP Test
0 Non-protected
1 Protected against solid objects over 50mm, e.g. accidental touch by hands.
2 Protected against solid objects over 12mm, e.g. fingers.
3 Protected against solid objects over 2.5mm, e.g. tools and wires.
4 Protected against solid objects over 1mm.
5 Protected against dust that could interfere with satisfactory operation.
6 Protected against dust that could interfere with satisfactory operation.
IP Test
0 Non-protected
1 Protected against vertically falling drops of water e.g. condensation.
2 Protected against direct sprays of water up to 150 from vertical.
3 Protected against sprays to 600 from vertical.
4 Protected against water sprayed from all directions.
5 Protected against low pressure jets of water from all directions.
6 Protected against strong jets of water.
7 Protected against the effects of immersion between 15cm and 1m.
IP RATING ABBREVIATION REFERENCE
2
3Simx Limited | www.simx.co.nz | [email protected]
Kitchens
The regulations require a fan capable of a minimum extraction capacity of 50 litres per second when installed.
Laundries
The regulations require a fan capable of a minimum extraction capacity of 20 litres per second when installed.
Bathrooms
The regulations require a fan capable of a minimum extraction capacity of 25 litres per second when installed.
Toilets
The regulations require a fan capable of a minimum extraction capacity of 25 litres per second when installed.
EXTRACTION SELECTIONFAN REGULATIONS
INDUSTRY RECOMMENDATIONS
• The mentioned flow rates below are minimum allowable. In general these would not be enough to overcome excessive moisture and condensation problems encountered in modern homes.
• The ventilation industry has a “Recommended Air-Changes per Hour” approach solution. i.e. An air flow rate sufficient to remove/replace the total volume of air in a given room a specified number of times each hour.
• Obviously fans will not necessarily be left running for an hour - a fact which is taken into consideration in the formula.
Example:
A bathroom is recommended at between 11 & 15 air-changes per hour. Therefore 15 changes per hour means the total air in the room would be replaced after 4 minutes.
e.g. (60 minutes @ 15 changes per hour - 4 minutes).
This would mean an average bathroom usage of 12 - 16 minutes resulting in the total air volume being changed 3 to 4 times. This equates to a rate of 15 ACH.
WHAT THE LAW STATES
New Zealand Building Code G4 Ventilation (summarised):
“Buildings shall have a means of collecting or otherwise removing: cooking fumes and odours; steam from laundering, utensil washing, bathing and showering; odours from sanitary and waste storage spaces; poisonous or flammable fumes and gases”.
• Natural Ventilation for the above is acceptable as long as opening windows in each room have an area of 5% or more of the floor area of the room.
• For internal rooms without natural ventilation, mechanical ventilation (extraction fans) must be installed to extract the air at given rates. Residential requirements are listed below.
• Where fans are used to remove moisture and other contaminants from kitchens, bathrooms and laundries in housing, the exhaust air must be ducted to the outside at the flow rates mentioned below.
• The above requirement for ducting also applies to any fan in those areas, even if there is an opening window (i.e. even if the fan is not a requirement to comply with ventilation regulations, but is installed as an optional extra).
Damp air out
Fresh air in
Poor Circulation Medium Circulation
Window Closed
Window Closed
Best Circulation
“Makeup air” is required for the fan to function efficiently. This is simply air that replaces the air that has already been extracted and can be achieved with a gap under the door (min 5mm) or a grill in the door, we do not recommend opening a window.
MANAGING MOISTURE
It is best to remove moisture from where it is generated to outside the house before it has a chance to spread to other parts of the house.
Use ducted fans, through-wall fans or window fans at all times. DO NOT use ceiling fans which discharge into the ceiling cavity, this only moves the problem.
Moisture will permeate insulation and ceiling linings causing further problems. In particular with bathrooms think in terms of “room-conditioning”. Warm, moist air is immediately attracted to cold surfaces, where it condenses into water droplets.
Cold surfaces include glass, mirrors, tiles, wet-wall linings, cold un-insulated ceiling linings, etc.
You cannot remove all of this air at a rate fast enough to stop this happening and if you could, you would be standing in a wind tunnel. Use of a bathroom heater to warm the room prior to use greatly assists in reducing condensation.
FAN PLACEMENT
Careful location of an extraction fan will ensure maximum air-flow through the room. Air extracted from a bathroom, for example, can be replaced with dry air drawn from an
adjacent bedroom or hallway, in turn, drawn from an open window or door.
This ensures that fresh air is being drawn into the entire house at regular periods. Switching the fan on before starting showering or cooking sets up effective air-flows before condensation problems occur.
Closing doors to adjacent living areas assists in stopping the transfer of moisture to those areas but ensure that sufficient air can enter under the door to replace extracted air. Use a door vent if necessary.
For a fan to remove air effectively, the same amount of air being extracted must be able to enter the room, e.g. air in = air out. An air-tight room will mean no air movement. If the room is tightly sealed (e.g. a tight-fitting door, with no gap at the bottom), you may need to fit a through-door grille to allow replacement air into the room.
4
EXTRACTION SELECTIONYOUR EXTRACTION SOLUTIONS
400
350
300
250
200
150
100
50
0
110
100
90
80
70
60
50
40
30
20
10
240
220
200
180
160
140
120
100
80
60
40
20
m3/hr l/s cfm
EXTRACTION SELECTIONCALCULATING EXTRACTION RATES
Application Description Air Changes Per Hour
Bathrooms 11 - 15
Kitchens - (domestic) 15 - 20
Laundries - (no drier) 6 - 10
Laundries - (with drier) 10 - 30
Toilets 6 - 10
Bedroom 2 - 5
Offices 6 - 10
Cafés 10 - 12
Canteens 8 - 12
Garages 6 - 8
Kitchens - (commercial) 20 - 30
Restaurants 8 - 12
Factories 8 - 10
Stores & Warehouses 3 - 6
Libraries 3 - 5
Classroom 5 - 7
Example:
What is the best fan for a bathroom that is 2.8m long by 2.8m wide with a ceiling height of 2.4m?
• Calculate the volume of the bathroom: 2.8 x 2.8 x 2.4 = 18.8m3.
• 11-15 air changes per hour are recommended for a bathroom. Multiply the room volume by 15: 18.8m3 x 15 = 282m3/hr.
• The fan to choose for this bathroom would be a fan that performs at greater than 282m3/hr.
• A fan that has a performance level of 313m3/hr or higher (e.g. XP150, or SF150) would do this job.
AIR CHANGES PER HOUR (ACH)
The number of times the total room volume of air is changed each hour. Refer to the table below for the recommended Air Changes per hour based on the room type.
WORKING OUT THE RIGHT FAN FOR THE JOB
• Calculate the room volume in metres (L x W x H).
• Multiply the room volume by the recommended air changes per hour for that room. Always use the higher limit.
• The result is the total performance required in cubic metres per hour.
Select a fan with a higher performance than this figure.
m³/hr to l/s to cfm Comparison Chart
Known To Find Action
l/s m³/hr l/s x 3.6 =m³/hr
m³/hr l/s m³/hr ÷ 3.6 = l/s
cfm m³/hr cfm x 1.69 =m³/hr
cfm l/s cfm x 0.47 = l/s
QUICK CROSS-REFERENCE CALCULATIONS:
Convert from one to other types of measurement:
Note: Stated extraction rates are “free air” values and do not account for grille type or duct run restrictions.
CONVERTING LITRES/SECOND (L/S) AND CUBIC METRES/HOUR (M³/HR) (NOTE: 1M3 = 1000 LITRES)
If you know the Litres/Second (l/s):
l/s x 3.6 = m³/hr. (e.g. 25 l/s x 3.6 = 90m³/hr).
If you know the Cubic Metres/Hour (m³/hr):
m³/hr ÷ 3.6 = l/s. (e.g. 200m³/hr ÷ 3.6 = 55.55 l/s).
5Simx Limited | www.simx.co.nz | [email protected]
COMPARE CENTRIFUGAL AGAINST AXIAL FAN PERFORMANCE:
100mm (Axial) vs 100mm (Centrifugal) fan.
The starting point is the free air performance of 23 l/s for the axial and 31 l/s for the centrifugal. As duct is added to each of these fans, this increases the pressure (Pa) and decreases volume of air moved.
From the below example you can see that at 20Pa of pressure the 100mm axial fan airflow has stopped whereas the 100mm centrifugal fan is still moving 29 l/s!
Smaller duct = greater resistance to airflow. More bends = greater resistance to airflow. Longer duct runs = increasingly reduced airflow.
Manrose ALUDUCT flexible ducting retains its stretched-out shape (for smooth airflow) far better than most competitive products.
Many competitive ducts tend to shrink back on themselves, wrinkling the duct fabric.
FAN TYPES
Centrifugal: Pressure developing fans which achieve good flow against the resistance created in a ducted system. Particularly useful in venting areas like internal bathrooms/laundries, multi-room extraction systems, heat transfer systems, etc.
Mixed Flow: Powerful in-duct mounted fans, designed for applications that require high air flows, with low relative noise. Can handle more pressure than an axial fan, although not as powerful as a centrifugal fan.
Axial: Suitable for wall, window and roof applications where they can extract directly to the outside.
Short duct runs are an option but the length of duct should be limited, to those noted below:
100mm diameter : 2-3m length 125mm diameter : 3-4m length 150mm diameter : 4-5m length
150mm (Axial) vs 150mm (Centrifugal) fan.
The starting point is the free air performance of 89 l/s for the axial and 115 l/s for the centrifugal.
As duct is added to each of these fans, this increases the pressure (Pa) and decreases the volume of air moved. From the below example you can see that at 120 Pa of pressure the 150mm axial fan airflow has stopped whereas the 150mm centrifugal fan is still moving 102 l/s!
Wrinkled duct airflow
Wrinkled ducting causes turbulence and reduces airflow:
Volume l/sec
Sta
tic
pre
ssur
e P
a
Volume m3/hr
SF200
SF100
100mm (Axial) vs 100mm (Centrifugal)
*Graphs are a visual representation only.
SIMPLE FACTS
Smooth duct airflow
Smoother, extended ducting allows smooth, increased airflow:
*Graphs are a visual representation only.
50
150
100
200
250
300
0 20 40 60 80 100 120 140
0 72 144 216 288 360 432 504
0
350
Volume l/sec
Sta
tic
pre
ssur
e P
a
Volume m3/hr
MAN150
ID150
150mm (Axial) vs 150mm (Centrifugal)
EXTRACTION SELECTION
6
EXTRACTION SELECTIONWET AREA ZONE GUIDE
When considering where in the room to place an extractor fan, you must consider the wet areas.
Zone 1: This is the zone directly within the shower or bath up to 2.25 metres above the floor and 150mm around the bath/shower cubicle. A SELV fan or an inline fan kit will be required in this zone.
For example if a fan is mounted directly over the bath or shower it must be a low voltage fan (SELV).
Zone 2: This zone is 0.6 metres horizontally outside of zone 1 and up to 2.25 metres above the floor.
Zone 3: The outer layer is zone 3, which is 2.4 metres horizontally outside of zone 2 and 2.25 metres above the floor.
Select the model that exhausts the closest to your requirements.
If the performance required falls between two fans, it is recommended you select the one handling the most air, as grille type and duct run length will reduce the stated ‘free air’ performance.
Requires a SELV Fan or an Inline fan kit.
Any fan model can be used.
Any fan model can be used.
Zone 1:
Zone 2:
Zone 3:
Note:
Stated extraction rates are “free air” values and do not account for grille type or duct run restrictions.
7Simx Limited | www.simx.co.nz | [email protected]
Location of your extraction fan will depend on the physical constraints of your room. The wet area zone guide (shown on the previous page) will help you decide the most suitable physical installation to meet your requirements. Within the various mounting options there are other features available, such as:
• TIMER (maintain fan operation for a set time after the room is vacated).
• PULLCORD (switch at fan, instead of wall switch control).
• AUTO-SHUTTER (electrically operated shutters inside the fan - closed when the fan is not running to stop draughts).
• PIR SENSOR (provide automatic motion-sensor control of fans).
Ceiling Mounted Fan
Designed for low-pitch roofs or between floors, where there is no ceiling access. Also available with heat lamps & lighting.
Thru Wall Fan Kit
Used where the bathroom is on an external wall, or there is no ceiling space for an inline fan.
Window Mounted Fan
Used in situations where an existing window fan is being replaced, or where there is no available external wall space and no ceiling space access.
Inline Mounted Fan Kit
Most common bathroom installation, the fan is mounted in the ceiling space with the grille directly above the source of the steam.
Generally this type of installation is quieter as the fan is not directly in the room.
Thru Roof Kit
Used where there is limited access to the roof space, or where there is no soffit available. Thru Roof Kits can be used with any extraction fan, or use a Thru Roof Fan Kit with the fan mounted within the cowl.
Wall/Ceiling
Thru Wall
Heat/Fan/Light
Inline
Window
8
EXTRACTION SELECTIONFAN TYPES
• 19mm stylish low profile grille.• Low Power consumption - 67% energy savings.• Downstream airflow guide vanes for improved pressure development.• 1 of 2 speeds selectable at installation.• High quality ball bearing motors.• Modern aesthetics, includes blue LED “on light”.• Fan IPX4 rated.• 5 Year Warranty.
Vent-Axia Lo-Carbon long life motors last considerably longer than conventional motors whilst delivering up to 67% energy savings. The extended life of Lo-Carbon fans is due to a new generation of high quality ball bearing motors.
With a slim profile of only 19mm, Silhouette blends in with the wall surface to provide an unobtrusive installation. Silhouette can be ceiling or wall mounted and connected to an appropriate duct run to exhaust outside.
Models include 2 speeds selectable at installation to customise the fan to each application and come complete with a blue LED to indicate operation.
Size (mm) Model No. Description
Extract Performance* Watts Sound Order Code
(m3/hr) (l/s) (W) dB(A) @3m
150 LCS150B Lo-Carbon Wall/Ceiling Silhouette Standard
165 46 5 35FAN2213
241 67 8.2 43
150 LCS150T Lo-Carbon Wall/Ceiling Silhouette Timer
165 46 5 35FAN2214
241 67 8.2 43
* 1 of 2 speeds selectable at installation
PERFORMANCE
WATTAGE COMPARISON
Switching Options
1. Standard Model - operates from remote switch (not supplied).2. Timer Model - Fan operates from a switch, the fan continues to run
for a preset time after switching off - adjustable 1-20 minutes.
Requires three wires: permanent phase, switched phase, neutral. NOTE: All fan flow rates quoted are free air delivery.
Size (mm) Model No. Description Wattage
150 XFLP150 Manrose Pro-Series Wall/Ceiling Fan 25W
150 LCS150 Vent-Axia Lo-Carbon Wall/Ceiling Fan 8.2W
Energy Savings 16.8W
67%ENERGY SAVINGS
VENT-AXIA LO CARBON WALL/CEILING MOUNTED FANSSILHOUETTE® 150
9Simx Limited | www.simx.co.nz | [email protected]
Requires three wires: permanent phase, switched phase, neutral. NOTE: All fan flow rates quoted are free air delivery.
Switching Options
1. Standard Model - operates from remote switch (not supplied).2. Timer Model - Fan operates from a switch, the fan continues to run
for a preset time after switching off - adjustable 1-20 minutes.
Duct Size Model No. Switching Method Performance Order Code
125mm XFLP125SS Standard 36 l/s, 130m3/hr FAN0589
125mm XFLP125ST Timer 36 l/s, 130m3/hr FAN0590
150mm XFLP150SS Standard 101 l/s, 364m3/hr FAN0594
150mm XFLP150ST Timer 101 l/s, 364m3/hr FAN0595
Duct Size Model No. Switching Method Performance Order Code
125mm XFLP125CS Standard 36 l/s, 130m3/hr FAN0604
125mm XFLP125CT Timer 36 l/s, 130m3/hr FAN0605
150mm XFLP150CS Standard 101 l/s, 364m3/hr FAN0609
150mm XFLP150CT Timer 101 l/s, 364m3/hr FAN0610
CIRCULAR MODELS
SAFETY EXTRA LOW VOLTAGE (SELV) MODELS
• Unique low profile design enables these fans to be installed unobtrusively into any wall or ceiling.• These axial fans have ball bearing motors to prolong the life of the motor.• Supported by a 5 year warranty.
ACCESSORIES
Duct Size Square Facia Order Code
125mm Satin Silver Fascia FAN2068
125mm Chrome Fascia FAN0755
150mm Satin Silver Fascia FAN2071
150mm Chrome Fascia FAN0598
Duct Size Circular Facia Order Code
125mm Satin Silver Fascia FAN2069
125mm Chrome Fascia FAN0757
150mm Satin Silver Fascia FAN2070
150mm Chrome Fascia FAN0613
SQUARE MODELS
Duct Size Model No. Switching Method Performance Order Code
125mm XFLP125SLV Standard 36 l/s, 130m3/hr FAN5886
125mm XFLP125CLV Standard 36 l/s, 130m3/hr FAN5885
150mm XFLP150SLV Standard 101 l/s, 364m3/hr FAN5892
150mm XFLP150CLV Standard 101 l/s, 364m3/hr FAN5891
MANROSE PRO-SERIES WALL/CEILING MOUNTED FANSXFLP LOW PROFILE MODELS
Square Model
Circular Model
SELV Model
Satin Silver / Chrome Fascia
These models include a SELV 12VAC transformer available from early 2015. SELV Model - Suitable for installation in damp areas, zones 1, 2 and 3.
10
11Simx Limited | www.simx.co.nz | [email protected]
D
BC
A
A
A
Models A B C D
XFLP125S 161 122 10 118
XFLP125C 165 122 10 118
XFLP150S 191 122 10 150
XFLP150C 198 122 10 150
Models Circular Cut-Out Size
XFLP125S 140mm - Using gib fixing clips supplied/included
XFLP125C 140mm - Using gib fixing clips supplied/included
XFLP150S 173mm - Using gib fixing clips supplied/included
XFLP150C 173mm - Using gib fixing clips supplied/included
DIMENSION INFORMATION (MM)
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Models XFLP125 XFLP150
Power 220 - 240V (SELV models 12V) 220 - 240V (SELV models 12V)
Fan Performance 36 l/s, 130m3/hr 101 l/s, 364m3/hr
Fan Wattage 20W 25W
Maximum Pressure 35 Pa 60 Pa
Fan Speed 2000 RPM 2400 RPM
Sound Level 41 dB(A) 40 dB(A)
Max. Operating Temp 50°C 50°C
IP Rating IPX4 IPX4
Performance - XFLP125 Performance - XFLP150
GENERAL INFORMATION
MANROSE CLASSIC WALL/CEILING MOUNTED FANSXF MODELS
1. Standard Model - operates from remote switch (not supplied).2. Timer Model - Fan operates from a switch, the fan continues to run
for a preset time after switching off - adjustable 1-20 minutes. 3. Pull Cord Model - Integral pull cord switch on fan.
4. Auto Shutters - Electrically operated louvre shutters open automatically when fan is running - prevents back-draughts.
5. PIR Model - Motion sensor incorporated in fan.6. SELV Model - Suitable for installation in damp areas, zones 1, 2 and 3. NOTE: All fan flow rates quoted are free air delivery
Duct Size Model No. Switching Method Performance Order Code
100mm XF100S Standard 23 l/s, 85m3/hr FAN0046
100mm XF100P Pull Cord 23 l/s, 85m3/hr FAN0047
100mm XF100T Timer 23 l/s, 85m3/hr FAN0048
125mm XF125S Standard 36 l/s, 130m3/hr FAN0072
125mm XF125P Pull Cord 36 l/s, 130m3/hr FAN0074
125mm XF125T Timer 36 l/s, 130m3/hr FAN0075
150mm XF150S Standard 101 l/s, 364m3/hr FAN0120
150mm XF150P Pull Cord 101 l/s, 364m3/hr FAN0126
150mm XF150T Timer 101 l/s, 364m3/hr FAN0127
150mm XF150PIR PIR Control 101 l/s, 364m3/hr FAN0124
Duct Size Model No. Switching Method Performance Order Code
150mm XF150A Standard 87 l/s, 313m3/hr FAN0121
150mm XF150AP Pull Cord 87 l/s, 313m3/hr FAN0122
150mm XF150AT Timer 87 l/s, 313m3/hr FAN0123
AUTO SHUTTER MODELS
SAFETY EXTRA LOW VOLTAGE (SELV) MODELS
• Designed for wall or ceiling mounting, these models are efficient and easy to install.• These axial fans have ball bearing motors to prolong the life of the motor.• Supported by a 5 year warranty.
STANDARD MODELS
Standard Model
Safety Model (SELV)
Auto Shutter Model
Duct Size Model No. Switching Method Performance Order Code
100mm XF100LV Standard 23 l/s, 85m3/hr FAN5883
125mm XF125LV Standard 36 l/s, 130m3/hr FAN5890
150mm XF150LV Standard 101 l/s, 364m3/hr FAN5896
These models include a low voltage transformer available from early 2015.
12
A
B
CD
E
Dimensions - XF
Models A B C D E
XF100 155 98 74 27 155
XF125 168 118 74 27 168
XF150 200 148 74 27 200
XF150PIR 200 148 90 55 200
XF150A/AP 200 148 90 55 200
DIMENSION INFORMATION (MM)
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Models Circular Cut-Out Size
XF100 112mm
XF125 140mm
XF150 160mm
Please note: Fan cut out size is a nominal diameter.
Performance - XF100 Performance - XF125 Performance - XF150
GENERAL INFORMATION
Models XF100 XF125 XF150
Power 220 - 240V (LV models 12V) 220 - 240V (LV models 12V) 220 - 240V (LV models 12V)
Fan Performance 23/s, 85m3/hr 36 l/s, 130m3/hr 101 l/s, 364m3/hr*
Fan Wattage 20W 20W 25W
Maximum Pressure 20 Pa 35 Pa 60 Pa
Fan Speed 2400 RPM 2000 RPM 2400 RPM
Sound Level 41 dB(A) 41 dB(A) 40 dB(A)
Max. Operating Temp 50°C 50°C 50°C
IP Rating IPX4 IPX4 IPX4
*Auto shutter 87 l/s, 313m3/hr installed.
13Simx Limited | www.simx.co.nz | [email protected]
Duct Size Model No. Switching Method Performance Order Code
230mm XFS230S Standard 152 l/s, 550m3/hr FAN0374
300mm XFS300S Standard 306 l/s, 1100m3/hr FAN2040
300mm XFS300S Standard 306 l/s, 1100m3/hr FAN2040
Duct Size Model No. Switching Method Performance Order Code
230mm XFS230A Standard 152 l/s, 550m3/hr FAN0346
300mm XFS300A Standard 306 l/s, 1100m3/hr FAN2041
AUTO SHUTTER MODELS
Duct Size Model No. Switching Method Performance Order Code
230mm XPS230S Standard 152 l/s, 550m3/hr FAN0455
300mm XPS300S Standard 306 l/s, 1100m3/hr FAN2042
Commercial ModelsDuct Size Model No. Switching Method Performance Order Code
230mm XPS230A Standard 152 l/s, 550m3/hr FAN0348
300mm XPS300A Standard 306 l/s, 1100m3/hr FAN2043
Auto Shutter Models
Commercial Models
Auto Shutter Models
AUTO SHUTTER MODELS
MANROSE CLASSIC WALL/CEILING FANSXFS COMMERCIAL MODELS
MANROSE CLASSIC THRU WALL FAN KITSXPS COMMERCIAL MODELS
STANDARD MODELS
STANDARD MODELS
14
Models XFS230 XFS300 XPS230 XPS300
Power 220 - 240V 220 - 240V 220 - 240V 220 - 240V
Fan Performance 152 l/s, 550m³/hr 306 l/s, 1100m³/hr 152 l/s, 550m³/hr 306 l/s, 1100m³/hr
Fan Wattage 45W 82W 45W 82W
Maximum Pressure 50 Pa 60 Pa 50 Pa 60 Pa
Fan Speed 1250 RPM 1300 RPM 1250 RPM 1300 RPM
Sound Level 50 dB(A) 60 dB(A) 50 dB(A) 60 dB(A)
Max. Operating Temp 50°C 50°C 50°C 50°C
IP Rating IPX4 IPX4 IPX4 IPX4
Models A B C D E F G H I
XFS230 286 230 141 75 66 - - - -
XFS300 362 300 156 81 75 - - - -
XPS230 286 230 141 75 286 250 375 248 30
XPS300 362 300 156 81 350 230 375 298 50
DIMENSION INFORMATION (MM)
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Models Fan Cut-Out Size Exterior Grille Duct Type Duct Length
XFS230 265mm - - -
XFS300 310mm - - -
XPS230 265mm White Fixed Grille Aluminium Semi-Rigid 375mm
XPS300 310mm White Fixed Grille Aluminium Semi-Rigid 375mm
Please note: Fan cut out size is a nominal diameter.
Dimensions - XF230/300
A
B
C
D
E
A
F AB
CD
E
G
H
I
Dimensions - XPS230/300
GENERAL INFORMATION
15Simx Limited | www.simx.co.nz | [email protected] - XFS230 Performance - XFS300
• Designed for apartments where space is limited, these ceiling mounted centrifugal fans can be installed in confined spaces.
• The centrifugal fan design assists ‘whisper quiet’ operation.• Reliable long lasting ball bearing motor.• Supported by a 3 year warranty.
Duct Size Model No. Colour Performance Order Code
100mm WVC100W White 63 l/s, 225m3/hr FAN0884
100mm WVC100S Stainless 63 l/s, 225m3/hr FAN0885
150mm WVC150S White 101 l/s, 364m3/hr FAN2465
Simx WhisperVent 150 - White
Simx WhisperVent 100 - Silver
Simx WhisperVent 100 - White
16
SIMX WHISPERVENT CENTRIFUGAL CEILING FANSWVC MODELS
17Simx Limited | www.simx.co.nz | [email protected]
Models A B C D E F
WhisperVent 100 240 290 172 98
WhisperVent 150 310 330 370 37 184 30
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Models WhisperVent 100 WhisperVent 150
Power 220 - 240V 220 - 240V
Fan Performance 63 l/s, 225m3/hr 101 l/s, 364m3/hr
Fan Wattage 30W 42W
Maximum Pressure 105 Pa 145 Pa
Fan Speed 2500 RPM 2500 RPM
Sound Level 38 dB(A) 44 dB(A)
Max. Operating Temp 40oC 40oC
IP Rating IPX4 IPX4
Dimensions - WhisperVent 100
Performance - WhisperVent 100
50 100 150 200 250
7515 30 45 60
20
40
60
0
80
100
120
140
160
200 40 60 80 100 120
500 100 150 200 250 300 350 400
Pre
ssur
e (P
a)
Volume (l/s)
Volume (m³/hr)
Performance - WhisperVent 150
DIMENSION INFORMATION (MM)
Dimensions - WhisperVent 150
A
D
E
B
CC
D
E
CC
A
BCC
D
A B
MANROSE CLASSIC MULTI-VENT FANSFF/SM MODELS
MANROSE CLASSIC WALL FANCF CENTRIFUGAL MODELS
3. PIR Model - Motion sensor incorporated in fan. Range up to 5 metres.NOTE: All fan flow rates quoted are free air delivery.
Switching Options
1. Standard Model - operates from remote switch (not supplied).2. Timer Model - Fan operates from a switch, the fan continues to run
for a preset time after switching off - adjustable 1-20 minutes. Requires three wires: permanent phase, switched phase, neutral.
Duct Size Model No. Switching Method
Performance @ Speed 3 Order Code
100mm FFCF234S Standard 65 l/s, 234m3/hr FAN0038
100mm FFCF234T Timer 65 l/s, 234m3/hr FAN0499
100mm FFCF234PIR PIR 65 l/s, 234m3/hr FAN0501
SURFACE MOUNT RANGE
Duct Size Model No. Switching Method
Performance @ Speed 3 Order Code
100mm SMCF234S Standard 65 l/s, 234m3/hr FAN0504
100mm SMCF234T Timer 65 l/s, 234m3/hr FAN0505
• Designed for apartments where space is limited, with a choice of wall or ceiling mounted system.• These Models include centrifugal fans with a choice of three in-built speed settings depending
on the performance required.• Supported by a 2 year warranty.
Duct Size Model No. Switching Method
Performance @ Speed 1 Order Code
100mm CF200S Standard 31 l/s, 110m3/hr FAN0041
100mm CF200TP Timer 31 l/s, 110m3/hr FAN0042
• Designed to move air over long distances.• The centrifugal fan design provides efficient airflow and quiet operation.• Supported by a 2 year warranty.
Flush Fitting Range
CF Centrifugal Model
FLUSH FITTING RANGE
18
Models A B C D E F G H
Multi-Vent FFCF234 91 96 141 250 15 155 210 -
Multi-Vent SMCF234 312 250 15 119.5 22.5 63 249 -
CF200 65 65 185 260 45 98 90 135
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Models Multi-Vent CF200
1 Speed 2 Speed 3 Speed
Power 220 - 240V 220 - 240V 220 - 240V 220 - 240V
Fan Performance 28 l/s, 100m3/hr 45 l/s, 162m3/hr 65 l/s, 234m3/hr 31 l/s, 110m3/hr
Fan Wattage 40W 80W 110W 45W
Maximum Pressure 140 Pa 165 Pa 180 Pa 120 Pa
Fan Speed 950 RPM 1500 RPM 1850 RPM 1400 RPM
Sound Level 37 dB(A) 51 dB(A) 56 dB(A) 45 dB(A)
Max. Operating Temp 50°C 50°C 50°C 50°C
IP Rating IPX4 IPX4 IPX4 IPX4
NOTE: 1, 2, 3 refer to speed settings controlled by internal switch (not consumer adjustable).
120
80
40
0
0 15 30 45 60 75Volume l/sec
Sta
tic
Pre
ssur
e P
a
54 162 216 270
200
160
Volume m3/hr
0
12
3
20
60
100
140
180
108
Performance - Multi-Vent Performance - CF200
DIMENSION INFORMATION (MM)
19Simx Limited | www.simx.co.nz | [email protected]
Dimensions - Multi-Vent (Flush Fitting)
A
BC
D
E G
D
G
F
A
B
C
D
E
GH
F
Dimensions - CF200
FA
B
CE
G
D
Dimensions - Multi-Vent (Surface Mount)
Duct Size Model No. Switching Method Performance Order Code
125mm XPLP125SS Standard 36 l/s, 130m3/hr FAN0614
125mm XPLP125ST Timer 36 l/s, 130m3/hr FAN0615
150mm XPLP150SS Standard 101 l/s, 364m3/hr FAN0621
150mm XPLP150ST Timer 101 l/s, 364m3/hr FAN0623
Duct Size Model No. Switching Method Performance Order Code
125mm XPLP125SLV Standard 36 l/s, 130m3/hr FAN5887
125mm XPLP125CLV Standard 36 l/s, 130m3/hr FAN5888
150mm XPLP150SLV Standard 101 l/s, 364m3/hr FAN5894
150mm XPLP150CLV Standard 101 l/s, 364m3/hr FAN5893
• The unique Low Profile design enables these fans to be installed unobtrusively into any wall (requires a minimum wall cavity of 110mm).
• These axial fans have ball bearing motors to prolong the life of the motor.• Supported by a 5 year warranty.
ACCESSORIES
SAFETY EXTRA LOW VOLTAGE (SELV) MODELS
Duct Size Square Fascia Order Code
125mm Satin Silver Fascia FAN2068
125mm Chrome Fascia FAN0755
150mm Satin Silver Fascia FAN2071
150mm Chrome Fascia FAN0598
Duct Size Circular Fascia Order Code
125mm Satin Silver Fascia FAN2069
125mm Chrome Fascia FAN0757
150mm Satin Silver Fascia FAN2070
150mm Chrome Fascia FAN0613
Low Voltage Models
Standard Models
Accessories - Circular Fascia
Accessories - Square
STANDARD MODELSKits include: ducting, exterior grille and fixtures.
3. SELV Models - Suitable for installation in damp areas, zones 1, 2 and 3.NOTE: All fan flow rates quoted are free air delivery.
Switching Options
1. Standard Model - operates from remote switch (not supplied).2. Timer Model - Fan operates from a switch, the fan continues to run for
a preset time after switching off - adjustable 1-20 minutes. Requires permanent phase and switched phase.
These models include a low voltage transformer available from early 2015.
20
MANROSE PRO-SERIES THRU WALL MOUNTED FAN KITSXPLP LOW PROFILE MODELS
GENERAL INFORMATION
Models A B C D E F G H I
XPLP125 161 118 128 10 160 125 375 123 30
XPLP150 191 150 132 10 174 150 375 148 30
DIMENSION INFORMATION (MM)
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Models XPLP125 XPLP150
Power 220 - 240V (LV models 12V) 220 - 240V (LV models 12V)
Fan Performance 36 l/s, 130m3/hr 101 l/s, 364m3/hr
Fan Wattage 20W 25W
Maximum Pressure 35 Pa 60 Pa
Fan Speed 2000 RPM 2400 RPM
Sound Level 41 dB(A) 40 dB(A)
Max. Operating Temp 50°C 50°C
IP Rating IPX4 IPX4
Models Fan Cut-Out Size Exterior Grille Duct Type Duct Length
XPLP125 140mm White Gravity Shutter Aluminium Semi-Rigid 375mm
XPLP150 173mm White Gravity Shutter Aluminium Semi-Rigid 375mm
Please note: Fan cut out size is a nominal diameter.
FE
G
H
I
AB
CD
Dimensions - XPLP
Performance - XPLP125 Performance - XPLP150
21Simx Limited | www.simx.co.nz | [email protected]
Duct Size Model No. Switching Method Performance Order Code
100mm XP100S Standard 23 l/s, 85m3/hr FAN0053
100mm XP100P Pull Cord 23 l/s, 85m3/hr FAN0054
100mm XP100T Timer 23 l/s, 85m3/hr FAN0055
125mm XP125S Standard 36 l/s, 130m3/hr FAN0080
125mm XP125P Pull Cord 36 l/s, 130m3/hr FAN0082
125mm XP125T Timer 36 l/s, 130m3/hr FAN0083
150mm XP150S Standard 101 l/s, 364m3/hr FAN0135
150mm XP150P Pull Cord 101 l/s, 364m3/hr FAN0140
150mm XP150T Timer 101 l/s, 364m3/hr FAN0141
AUTO SHUTTER MODELS
Duct Size Model No. Switching Method Performance Order Code
150mm XP150A Standard 87 l/s, 313m3/hr FAN0136
150mm XP150AP Pull Cord 87 l/s, 313m3/hr FAN0137
150mm XP150AT Timer 87 l/s, 313m3/hr FAN0138
• These fans are designed to be ducted straight through an exterior wall and are efficient and easy to install.• These axial fans have ball bearing motors to prolong the life of the motor.• Supported by a 5 year warranty.
SAFETY EXTRA LOW VOLTAGE (SELV) MODELS
Duct Size Model No. Switching Method Performance Order Code
100mm XP100LV Standard 25 l/s, 85m3/hr FAN0409
125mm XP125LV Standard 36 l/s, 130m3/hr FAN0410
150mm XP150LV Standard 101 l/s, 364m3/hr FAN0411
These models include a low voltage transformer available from early 2015.
MANROSE CLASSIC THRU WALL MOUNTED FAN KITSXP MODELS
Standard Models
Auto Shutter Models
Low Voltage Models
STANDARD MODELS
3. Pull Cord Model - Integral pull cord switch on fan.4. Auto Shutters - Electrically operated louvre shutters open automatically when
fan is running - prevents back-draughts.5. SELV Models - Suitable for installation in damp areas, zones 1, 2 and 3. NOTE: All fan flow rates quoted are free air delivery.
Switching Options
1. Standard Model - operates from remote switch (not supplied).2. Timer Model - Fan operates from a switch, the fan continues to run
for a preset time after switching off - adjustable 1-20 minutes. Requires three wires: permanent phase, switched phase, neutral.
Kits include: ducting, exterior grille and fixtures.
22
Performance - XP100 Performance - XP125 Performance - XP150
Models XP100 XP125 XP150
Power 220 - 240V (SELV models 12V) 220 - 240V (SELV models 12V) 220 - 240V (SELV models 12V)
Fan Performance 23 l/s, 85m³/hr 36 l/s, 130m³/hr 101 l/s, 364m3/hr*
Fan Wattage 20W 20W 25W
Maximum Pressure 20 Pa 35 Pa 60 Pa
Fan Speed 2400 RPM 2000 RPM 2400 RPM
Sound Level 41 dB(A) 41 dB(A) 40 dB(A)
Max. Operating Temp 50°C 50°C 50°C
IP Rating IPX4 IPX4 IPX4
*Auto shutter 87 l/s, 313m3/hr installed.
Models A B C D E F G H I
XP100 155 98 74 27 138 100 375 98 30
XP125 168 118 74 27 160 125 375 123 30
XP150 200 148 74 27 174 150 375 148 30
XP150A 200 148 90 55 174 150 375 148 30
DIMENSION INFORMATION (MM)
TECHNICAL SPECIFICATION & PERFORMANCE DATA
GENERAL INFORMATION
Models Fan Cut-Out Size Exterior Grille Duct Type Duct Length
XP100 112mm Grey Gravity Shutter Aluminium Semi-Rigid 375mm
XP125 140mm Grey Gravity Shutter Aluminium Semi-Rigid 375mm
XP150 160mm Grey Gravity Shutter Aluminium Semi-Rigid 375mm
Please note: Fan cut out size is a nominal diameter.
23Simx Limited | www.simx.co.nz | [email protected]
F AB
CD
E
G
H
I
Dimensions - XP
Duct Size Model No. Switching Method Performance Order Code
150mm WF150AP Pull Cord 87 l/s, 313m3/hr FAN0107
150mm WF150APT Pull Cord Timer 87 l/s, 313m3/hr FAN0109
150mm WF150APLV Low Voltage 87 l/s, 313m3/hr FAN5897
Duct Size Model No. Switching Method Performance Order Code
100mm WF100P Pull Cord 23 l/s, 85m3/hr FAN0021
100mm WF100PLV Low Voltage 23 l/s, 85m3/hr FAN5884
AUTO SHUTTER MODELS
• Designed for use in situations where an existing window fan is being replaced or where there is no available external wall space or ceiling space access.
• These axial fans have ball bearing motors to prolong the life of the motor.• Supported by a 5 year warranty.
Standard Models
Auto Shutter Models
STANDARD MODELS
4. Auto Shutters - Electrically operated louvre shutters open automatically when fan is running - prevents back-draughts.
5. Manual Pull cord - Pull cord operates fan and manual shutters.6. SELV Models - Suitable for installation in damp areas, zones 1, 2 and 3. NOTE: All fan flow rates quoted are free air delivery.
Switching Options
1. Standard Model - operates from remote switch (not supplied).2. Timer Model - Fan operates from a switch, the fan continues to run
for a preset time after switching off - adjustable 1-20 minutes. 3. Pull Cord Model - Integral pull cord switch on fan.
24
MANROSE CLASSIC WINDOW MOUNTED FANSWF MODELS
Models A B C D
WF100 163 90 30 163
WF150 203 118 23 203
DIMENSION INFORMATION (MM)
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Models WF100 WF150
Power 220 - 240V 220 - 240V (SELV models 12V)
Fan Performance 23 l/s, 85m³/hr 87 l/s, 313m3/hr
Fan Wattage 20W 25W
Maximum Pressure 20 Pa 60 Pa
Fan Speed 2400 RPM 2400 RPM
Sound Level 41 dB(A) 40 dB(A)
Max. Operating Temp 50oC 50oC
IP Rating IPX4 IPX4
Models Glass Cut-Out Size
WF100 115mm - 155mm
WF150 165mm - 190mm
Please note: Glass cut out size is a nominal diameter for a circular cut-out.
A
BC
D
Dimensions - WF
Performance - WF100 Performance - WF150
GENERAL INFORMATION
25Simx Limited | www.simx.co.nz | [email protected]
COM MODELS
AUTO SHUTTER MODELS
Duct Size Model No. Switching Method Performance Order Code
230mm WF230AP Pull Cord 152 l/s, 550m3/hr FAN0146
300mm WF300A Standard 306 l/s, 1100m3/hr FAN0482
Duct Size Model No. Switching Method Performance Order Code
230mm COM230A Standard 185 l/s, 670m3/hr FAN0519
230mm COM230MP Pull Cord 185 l/s, 670m3/hr FAN0518
300mm COM300A Standard 280 l/s,1020m3/hr FAN0521
300mm COM300MP Pull Cord 280 l/s,1020m3/hr FAN0520
• Designed for use in situations where an existing window fan is being replaced or where there is no available external wall space or ceiling space access.
• These axial fans have ball bearing motors to prolong the life of the motor. • Supported by a 5 year warranty.
Duct Size Model No. Switching Method Performance Order Code
230mm WF230P Pull Cord 152 l/s, 550m3/hr FAN0148
300mm WF300P Pull Cord 306 l/s, 1100m3/hr FAN0481
• Designed for commercial applications such as pubs, restaurants, hotels, shops etc. • These axial fans have ball bearing motors to prolong the life of the motor.• Supported by a 5 year warranty.
Standard Larger Models
Auto Shutter Models
Commercial Auto Shutter Models
STANDARD MODELS
MANROSE CLASSIC WINDOW COMMERCIAL FANSWF/COM MODELS
1. Standard Model - operates from remote switch (not supplied).2. Timer Model - Fan operates from a switch, the fan continues to run
for a preset time after switching off - adjustable 1-20 minutes. 3. Pull Cord Model - Integral pull cord switch on fan.
4. Auto Shutters - Electrically operated louvre shutters open automatically when fan is running - prevents back-draughts.
5. Manual Pull cord - Pull cord operates fan and manual shutters.6. SELV Models - Suitable for installation in damp areas, zones 1, 2 and 3. NOTE: All fan flow rates quoted are free air delivery.
26
Models A B C D E
WF230 286 286 4-32 112 25
WF300 362 362 4-32 133 29
COM230 286 125 25 154 -
COM300 362 145 25 170 -
Models WF230 WF300 COM230 COM300
Power 220 - 240V 220 - 240V 220 - 240V 220 - 240V
Fan Performance 152 l/s, 550m3/hr 306 l/s, 1100m3/hr 185 l/s, 670m3/hr 280 l/s, 1020m3/hr
Fan Wattage 45W 82W 45W 82W
Maximum Pressure 50 Pa 60 Pa 50 Pa 60 Pa
Fan Speed 1250 RPM 1300 RPM 1600 RPM 1300 RPM
Sound Level 50 dB(A) 60 dB(A) 53 dB(A) 60 dB(A)
Max. Operating Temp 50°C 50°C 50°C 50°C
DIMENSION INFORMATION (MM)
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Models Glass Cut-Out Size
WF230 255mm - 270mm
WF300 310mm - 345mm
COM230 255mm - 270mm
COM300 310mm - 345mm
Please note: Glass cut out size is a nominal diameter for a circular cut-out.
A
B
C
D E
Dimensions - WF230/300
A
B
C
A
D
Dimensions - COM230/300
Performance - WF230 Performance - WF300
55
40
25
0
0 250 500 750
0 70 140 210
Stat
ic P
ress
ure
Pa
Volume l/sec
Volume m /hr3
55
40
25
0
0 83 168 250 333 416
0 300 600 900 1200 1500
Stat
ic P
ress
ure
Pa
Volume l/sec
Volume m /hr3
Performance - COM230 Performance - COM300
GENERAL INFORMATION
27Simx Limited | www.simx.co.nz | [email protected]
MANROSE DESIGNER SERIES LED HEAT/FAN/LIGHT KITS
1. Standard Model - operates from remote switch (supplied).
NOTE: All fan flow rates quoted with 3 metres of duct, one bend and one external grille (normal installation).
Duct Size Model No. Performance Order Code
150mm Heat ‘n Vent 4 Silver 86 l/s, 310m3/hr FAN4466
150mm Heat ‘n Vent 4 White 86 l/s, 310m3/hr FAN4465
150mm Heat ‘n Vent 2 Silver 86 l/s, 310m3/hr FAN4464
150mm Heat ‘n Vent 2 White 86 l/s, 310m3/hr FAN4463
ACCESSORIES
Description Order Code
275W Heat Lamp LHT0081
LED Replacement Lamp for Silver Units LHT0211
• With high levels of extraction, these units have a stylish low profile design, making them easy to install into tight fitting roof cavities.
• The units incorporate long-life energy efficient LED centre lamps.• Supported by a 5 year warranty.
Designer Series Heat ‘n Vent 4
Designer Series Heat ‘n Vent 2
STANDARD MODELS
28
Models Cut-Out Size Exterior Grille Duct Type Duct Length
DS Heat ‘n Vent 4 Slv 435mm x 275mm White Eggcrate Aluminium 3m supplied (you can add up to 3m extra duct)
DS Heat ‘n Vent 4 Wht 435mm x 275mm White Eggcrate Aluminium 3m supplied (you can add up to 3m extra duct)
DS Heat ‘n Vent 2 Slv 435mm x 255mm White Eggcrate Aluminium 3m supplied (you can add up to 3m extra duct)
DS Heat ‘n Vent 2 Wht 435mm x 255mm White Eggcrate Aluminium 3m supplied (you can add up to 3m extra duct)
DIMENSION INFORMATION (MM)
TECHNICAL SPECIFICATION
Models DS Heat ‘n Vent 4 DS Heat ‘n Vent 2
Power 230 - 240V 230 - 240V
Fan Centrifugal Centrifugal
Fan Performance 86 l/s, 310m³/hr 86 l/s, 310m³/hr
Heat Lamps 4 x 275W 2 x 275W
Light GU10 LED GU10 LED
Total Wattage 1080 - 1180W 550 - 610W
Light Wattage 4 x 4.5W 3 x 4.5W
Switch Plate 4 sw. (supplied) 3 sw. (supplied)
A
B
C
D
A B
C
D
Dimensions - DS Heat ‘n Vent 2Dimensions - DS Heat ‘n Vent 4
Models A B C D
DS Heat ‘n Vent 4 480 360 205 120*
DS Heat ‘n Vent 2 480 290 205 120*
* 125mm to 150mm adapter included in kit.
GENERAL INFORMATION
29Simx Limited | www.simx.co.nz | [email protected]
2 Heat ‘n Light
Classic Heat ‘n Vent 2
Pro-Series Heat ‘n Vent 2
MANROSE CLASSIC HEAT/LIGHT KIT2 HEAT ‘N LIGHT
MANROSE CLASSIC HEAT/FAN/LIGHT KITHEAT ‘N VENT 2
Duct Size Model No. Performance Order Code
125mm Heat ‘n Vent 4 60 l/s, 216m3/hr FAN0995
125mm Heat ‘n Vent 2 50 l/s, 180m3/hr FAN0940
ACCESSORIES
Duct Size Description Order Code
125mm Heat ‘n Vent 4 Silver Fascia FAN1015
125mm Heat ‘n Vent 2 Silver Fascia FAN1014
275W Heat Lamp LHT0081
50W Halogen GU10 lamp LHT0140
• These systems meet the demands of larger bathrooms and the stylish fascia blends into the decor.
• These high efficiency centrifugal fans incorporate a unique anti-condensate design feature.
• Supported by a 5 year warranty.
Duct Size Model No. Performance Order Code
100mm Heat ‘n Vent 2 35 l/s, 126m3/hr FAN2162
Duct Size Description Order Code
100mm 2 Heat ‘n Light (excludes fan) FAN2200
• This system delivers instant heat combined with ventilation and soft lighting to create a comfort area in small bathrooms.
• Supported by a 5 year warranty.
• This system provides instant heat and additional lighting.• For a complete bathroom solution an extraction fan can be added.• Supported by a 5 year warranty.
Pro-Series Heat ‘n Vent 4
MANROSE PRO-SERIES HEAT/FAN/LIGHT KITSHEAT ‘N VENT MODELS
1. Standard Model - operates from remote switch (not supplied).NOTE: All fan flow rates quoted with 3 metres of duct, one bend and one external grille (normal installation).
30
Models A B C D
PS Heat ‘n Vent 4 338 338 170 120
PS Heat ‘n Vent 2 435 260 185 120
Heat ‘n Vent 450 250 195 100
Heat ‘n Light 450 250 195 100
Models Cut-Out Size Exterior Grille Duct Type Duct Length
PS Heat ‘n Vent 4 300mm x 300mm White Eggcrate Aluminium 3m supplied (you can add up to 3m extra duct)
PS Heat ‘n Vent 2 390mm x 210mm White Eggcrate Aluminium 3m supplied (you can add up to 3m extra duct)
Classic Heat ‘n Vent 2 390mm x 220mm White Eggcrate Aluminium 3m supplied (you can add up to 3m extra duct)
Classic Heat ‘n Light 390mm x 220mm - - -
DIMENSION INFORMATION (MM)
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Models PS Heat ‘n Vent 4 PS Heat ‘n Vent 2 Heat ‘n Vent 2 2 Heat ‘n Light
Power 220 - 240V 220 - 240V 220 - 240V 220 - 240V
Fan Centrifugal Centrifugal Centrifugal -
Fan Performance 60 l/s, 216m³/hr 50 l/s, 180m³/hr 35 l/s, 126m³/hr -
Heat Lamps 4 x 275W 2 x 275W 2 x 275W 2 x 275W
Light GU10 Halogen GU10 Halogen GLES GLES
Total Wattage 1180W 635W 670W 650W
Light Wattage 50W 50W 100W 100W
Switch Plate 4 sw. (supplied) 3 sw. (supplied) 3 sw. (supplied) 2 sw. (supplied)
Dimensions - PS Heat ‘n Vent 2Dimensions - PS Heat ‘n Vent 4 Dimensions - Classic Heat ‘n Vent
A
B
C
D
A B
C
D
B
C
A
D
B
C
Dimensions - Classic 2 Heat ‘n Light
72 144 180 216 252 28810836
70
Performance Graph
Note: Performance tested in free air.
Pro-Series Heat ‘n Vent 401
Pro-Series Heat ‘n Vent 202
Classic Heat 'n Vent 203010203
GENERAL INFORMATION
31Simx Limited | www.simx.co.nz | [email protected]
Duct Size Model No. Switching Method Performance Order Code
100mm MFLP100S Standard 69 l/s, 250m3/hr FAN2049
125mm MFLP125S Standard 89 l/s, 320m3/hr FAN2050
150mm MFLP150S Standard 166 l/s, 597m3/hr FAN2051
• These powerful inline mixed flow fans have been designed to produce higher working pressures for applications that require higher airflows with low relative noise levels.
• Supported by a 5 year warranty.
MFLP150
Models Grille Cut-Out Interior Grille Exterior Grille Duct Type Duct Length
MFLP100 115mm White Low Profile White Low Profile Unilok Nude 6m supplied (you can add up to 6m extra duct)
MFLP125 140mm White Low Profile White Low Profile Unilok Nude 6m supplied (you can add up to 6m extra duct)
MFLP150 160mm White Low Profile White Low Profile Unilok Nude 6m supplied (you can add up to 6m extra duct)
Please note: Grille cut out size is a nominal diameter for a circular cut-out.
GENERAL INFORMATION
PRO-SERIES INLINE MOUNTED FAN KITSMIXFLO™ SHOWER FAN MODELS
1. Standard Model - operates from remote switch (not supplied).
32
Models A B C D E F G
MF100 98 182 315 100 100 168 27
MF125 122 182 350 100 100 168 60
MF150 147 209 360 130 115 195 55
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Model No Sound Power Levels Lw (dB)Octave band centre frequency in Hz LwA dB(A)
125 250 500 1000 2000 4000 8000
MF100 50 56 58 58 52 47 37 61
MF125 52 59 60 60 56 49 41 63.5
MF150 58 66 65 63 62 54 46 67.5
SOUND POWER LEVELS (HIGH SPEED)
Dimensions - MF
Model No Size (mm) RPM Watts Maximum Airflow
(m³/hr)Maximum Pressure (Pa)
Lp dB(A)3m*
IPRating
Max Operating Temp °C
MF100 1002300 40 250 180
40 X4 451700 18 190 120
MF125 1252300 40 320 220
43 X4 451700 18 260 160
MF150 1502700 70 597 300
47 X4 602000 60 330 240
* Lp dB(A) @ 3 metres - sound pressure based on the high speed for each fan.
0
20
40
60
80
100
120
140
160
180
200
0 20 40 60 80
Pre
ssur
e (P
a)
Airflow (L/s)
Airflow (m3/hr)
0 50 100 150 200 250 300
Pre
ssur
e (P
a)
Airflow (L/s)
Airflow (m3/hr)
0 50 100 150 200 250 300 350
0
50
100
150
200
250
0 20 40 60 80 100
Pre
ssur
e (P
a)
Airflow (L/s)
Airflow (m3/hr)
0
50
100
150
200
250
300
350
0 50 100 150 200
0 100 200 300 400 500 600 700
Performance - MF100 Performance - MF125 Performance - MF150
A B
CD
E
FG
DIMENSION INFORMATION (MM)
33Simx Limited | www.simx.co.nz | [email protected]
MANROSE PRO-SERIES INLINE MOUNTED FANS KITSSFLP SHOWER FAN MODELS
1. Standard Model - operates from remote switch (not supplied).2. Timer Model - Fan operates from a switch, the fan continues to run
for a preset time after switching off. The 100 and 125mm models are
adjustable between 1-20 minutes, whereas the 150mm models include a fixed 7 minute timer. Both require three wires: permanent phase, switched phase.
NOTE: All fan flow rates quoted are free air delivery. Performance will be affected by the length of ducting used.
Duct Size Model No. Switching Method Fan Type Performance Order Code
125mm SFLP125S Standard Ctr’fgl 39 l/s, 140m³/hr FAN0616
125mm SFLP125T Timer Ctr’fgl 39 l/s, 140m³/hr FAN0617
150mm SFLP150S Standard Whisper 94 l/s, 340m³/hr FAN0618
150mm SFLP150T Timer Whisper 94 l/s, 340m³/hr FAN0619
• These high efficiency inline fans are designed to provide higher levels of extraction for today’s larger bathrooms.
• Supported by a 5 year warranty.
SFLP150
Models Grille Cut-Out Interior Grille Exterior Grille Duct Type Length of duct included
SFLP125 140mm White Low Profile options
Weatherproof Cowl or Fixed insert option Flexible PVC 4m supplied (can be
extended up to 6m)
SFLP150 160mm White Low Profile options
Weatherproof Cowl or Fixed insert option Flexible PVC 5m supplied (can be
extended up to 12m)
Please note: Grille cut out size is a nominal diameter for a circular cut-out.
GENERAL INFORMATION
34
35Simx Limited | www.simx.co.nz | [email protected]
Models A B C D E
SFLP125 155 125 125 195 258
SFLP150 200 143 170 185 -
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Models SFLP125 SFLP150
Fan CFD225 WhisperVent
Power 220 - 240V 220 - 240V
Fan Performance 39 l/s, 140m³/hr 94 l/s, 340m³/hr
Fan Wattage 20W 46W
Maximum Pressure 120 Pa 160 Pa
Fan Speed 1400 RPM 2750 RPM
Sound Level 45 dB(A) 38 dB(A)
Max. Operating Temp 50°C 80°C
IP Rating IPX4 IPX2
AB CD
E
A
B D
CA
B
C
D
Dimensions - SFLP125 Dimensions - SFLP150
72 144 180 216 252 288 324 36010836
70 90
Performance - SFLP125 Performance - SFLP150
DIMENSION INFORMATION (MM)
Duct Size Model No. Switching Method Fan Type Performance Order Code
100mm SF100S Standard Axial 23 l/s, 85m3/hr FAN0017
100mm SF100T Timer Axial 23 l/s, 85m3/hr FAN0018
100mm SF200S Standard Ctr’fgl 31 l/s, 110m3/hr FAN0328
100mm SF200T Timer Ctr’fgl 31 l/s, 110m3/hr FAN0329
125mm SF125S Standard Axial 36 l/s, 130m3/hr FAN0064
125mm SF125T Timer Axial 36 l/s, 130m3/hr FAN0065
150mm SF150S Standard Hyper 89 l/s, 320m3/hr FAN0101
150mm SF150T Timer Hyper 89 l/s, 320m3/hr FAN0102
• With the fan mounted in the ceiling space, these inline models are able to draw steam directly from source.
• These fans have ball bearing motors to prolong the life of the motor.• Supported by a 5 year warranty.
SF150
GENERAL INFORMATION
Please note: Grille cut out size is a nominal diameter for a circular cut-out.
Models Grille Cut-Out Interior Grille Exterior Grille Duct Type Length of duct included
SF100 115mm White Round White Fixed Louvre Flexible PVC 3m supplied (should not be extended)
SF200 115mm White Round White Fixed Louvre Flexible Alum 3m supplied (can be extended up to 6m)
SF125 140mm White Round White Fixed Louvre Flexible PVC 4m supplied (should not be extended)
SF150 160mm White Round White Fixed Louvre Flexible PVC 5m supplied (can be extended up to 12m)
MANROSE CLASSIC INLINE MOUNTED FAN KITSSF SHOWER FAN MODELS
1. Standard Model - operates from remote switch (not supplied).2. Timer Model - Fan operates from a switch, the fan continues to run
for a preset time after switching off. The 100 and 125mm models are
adjustable between 1-20 minutes, whereas the 150mm models include a fixed 7 minute timer. Both require: permanent phase and switched phase.
NOTE: All fan flow rates quoted are free air delivery. Performance will be affected by the length of ducting used.
36
DIMENSION INFORMATION (MM)
Models A B C D E
SF100 130 155 90 100 27
SF200 155 100 100 195 258
SF125 150 155 99 118 27
SF150 187 153 109 150 27
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Models SF100 SF200 SF125 SF150
Fan ID100 CFD200 ID125 Hyper
Power 220 - 240V 220 - 240V 220 - 240V 220 - 240V
Fan Performance 23 l/s, 85m³/hr 31 l/s, 110m³/hr 36 l/s, 130m³/hr 89 l/s, 320m³/hr
Fan Wattage 20W 20W 20W 38W
Maximum Pressure 20 Pa 120 Pa 35 Pa 135 Pa
Fan Speed 2400 RPM 1400 RPM 2000 RPM 2650 RPM
Sound Level 41 dB(A) 45 dB(A) 41 dB(A) 46 dB(A)
Max Operating Temp 50°C 50°C 50°C 70°C
IP Rating IPX4 IPX4 IPX4 IPX2
Dimensions - SF150
Performance - SF100 Performance - SF200Performance - SF125
Note: PERFORMANCE - ID Fans maximum fan performance stated, this can vary depending on the length of ducting used.
Performance - SF150
72 144 180 216 252 288 324 36010836
70 90
A
B D
CA
B
C
D
Dimensions - SF100/SF125/150
Dimensions - SF200
A
B
C
D
E
AB CD
E
37Simx Limited | www.simx.co.nz | [email protected]
Halogen Model
Fits Model Diffuser Colour Order Code
ELLP150 Incl Halogen White DCT1521
ELLP150 Incl Halogen Silver DCT1522
ELLP125 Incl Halogen White DCT1519
ELLP125 Incl Halogen Silver DCT1520
LED Model
Fits Model Diffuser Colour Order Code
ELLP150 Incl LED & Driver White DCT3211
ELLP150 Incl LED & Driver Silver DCT3212
ELLP125 Incl LED & Driver White DCT3213
ELLP125 Incl LED & Driver Silver DCT3214
ELLPS150 Incl LED & Driver White DCT3640
MANROSE PRO-SERIES INLINE FAN/LIGHT KITSELLP EXTRACT-A-LITE/LED LOW PROFILE MODELS
• These high efficiency inline fans are designed to provide higher levels of extraction for larger bathrooms.
• Choose either an energy efficient LED or halogen lamp.• White or satin silver finish available to complement your bathroom decor.• Supported by a 5 year warranty.
Duct Size Model Switching
Method Performance Order CodeHalogen / LED
125mm ELLP125WS - Wht Standard 39 l/s, 140m3/hr FAN2029 / FAN5379
125mm ELLP125WT - Wht Timer 39 l/s, 140m3/hr FAN2031 / FAN5381
125mm ELLP125SS - Slv Standard 39 l/s, 140m3/hr FAN2030 / FAN5380
125mm ELLP125ST - Slv Timer 39 l/s, 140m3/hr FAN2032 / FAN5382
150mm ELLP150WS - Wht Standard 94 l/s, 340m3/hr FAN2033 / FAN5375
150mm ELLP150WT - Wht Timer* 94 l/s, 340m3/hr FAN2035 / FAN5377
150mm ELLP150SS - Slv Standard 94 l/s, 340m3/hr FAN2034 / FAN5376
150mm ELLP150ST - Slv Timer* 94 l/s, 340m3/hr FAN2036 / FAN5378
150mm ELLPS150WS - Wht SQ Standard 94 l/s, 340m3/hr FAN5899
150mm ELLPS150WT – Wht SQ Timer* 94 l/s, 340m3/hr FAN5900
* Includes a 7 minute fixed timer.
ACCESSORIES
Halogen/LED ELLP125SW
Halogen/LED ELLP150SS
GENERAL INFORMATION
Models Diffuser Cut-Out Interior Exterior Grille Duct Type Length of duct included
ELLP125 140mm White or Satin Silver Extract-a-lite White Low Profile Black Unilok 6m supplied
(you can add up to 6m extra duct)
ELLP150 165mm White or Satin Silver Extract-a-lite White Low Profile Black Unilok 6m supplied
(you can add up to 6m extra duct)
Please note: Diffuser cut out size is a nominal diameter for a circular cut-out.
LED-ELLP150 Diffuser White
LED-ELLPS150 Diffuser White
adjustable between 1-20 minutes, whereas the 150mm models include a fixed 7 minute timer. Both require: permanent phase, and switched phase.
NOTE: All fan flow rates quoted are free air delivery. Performance will be affected by the length of ducting used.
Switching Options
1. Standard Model - operates from remote switch (not supplied).2. Timer Model - Fan operates from a switch, the fan continues to run
for a preset time after switching off. The 100 and 125mm models are
38
39Simx Limited | www.simx.co.nz | [email protected]
Models A B C D E F G H
ELLP125 155 125 125 195 258 165 80 110
ELLP150 200 143 170 185 - 200 80 148
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Models ELLP125 ELLP150
Fan CFD225 WhisperVent
Power 220 - 240V 220 - 240V
Fan Performance 39 l/s, 140m³/hr 94 l/s, 340m³/hr
Fan Wattage 20W 46W
Maximum Pressure 120 Pa 160 Pa
Fan Speed 1400 RPM 2750 RPM
Light 12V 50W Halogen 12V 50W Halogen
12V 3W LED 12V 3W LED
Total Wattage 99W 96W
Sound Level 45 dB(A) 38 dB(A)
Max. Operating Temp 50°C 80°C
IP Rating IPX4 IPX2
Dimensions - ELLP125 Fan
F
G
H
AB CD
E
A
B D
CA
B
C
D
Dimension - ELLP150 Fan Dimensions - ELLP Extract-a-lite Diffuser
72 144 180 216 252 288 324 36010836
70 90
Performance - ELLP150Performance - ELLP125
DIMENSION INFORMATION (MM)
Halogen Model
Fits Model Diffuser Colour Order Code
EL150 Incl Halogen White DCT1169
EL150 Incl Halogen Chrome DCT1171
EL125 Incl Halogen White DCT2121
EL125 Incl Halogen Chrome DCT2120
EL100 Incl Halogen White DCT0360
EL100 Incl Halogen Chrome DCT0362
LED Model
Fits Model Diffuser Colour Order Code
EL150 Incl LED & Driver White DCT3209
EL150 Incl LED & Driver Chrome DCT3208
EL125 Incl LED & Driver White DCT3207
EL125 Incl LED & Driver Chrome DCT3206
EL100 Incl LED & Driver White DCT3205
EL100 Incl LED & Driver Chrome DCT3204
ACCESSORIES
• The fan is mounted in the ceiling space, and is therefore able to draw steam directly from source, while at the same time providing spot lighting within your bathroom.
• Choose either an energy efficient LED or halogen lamp.• These fans have ball bearing motors to prolong the life of the motor.• Supported by a 5 year warranty.
Halogen/LED EL150S
Models Diffuser Cut-Out Interior Exterior Grille Duct Type Length of Duct included
EL100 115mm White or Chrome Extract-a-lite White Eggcrate Flexible PVC 3m supplied (should not be extended)
EL125 145mm White or Chrome Extract-a-lite White Eggcrate Flexible PVC 4m supplied (should not be extended)
EL150 165mm White or Chrome Extract-a-lite White Eggcrate Flexible PVC 5m supplied (you can add up to 12m extra duct)
Please note: Diffuser cut out size is a nominal diameter for a circular cut-out.
GENERAL INFORMATION
Duct Size Model Switching
Method Performance Order CodeHalogen / LED
100mm EL100S Standard 31 l/s, 110m3/hr FAN0420 / FAN5373
100mm EL100T Timer 31 l/s, 110m3/hr FAN0438 / FAN5374
125mm EL125S Standard 36 l/s, 130m3/hr FAN2037 / FAN5371
125mm EL125T Timer 36 l/s, 130m3/hr FAN2038 / FAN5372
150mm EL150S Standard 89 l/s, 320m3/hr FAN0803 / FAN5369
150mm EL150T Timer* 89 l/s, 320m3/hr FAN0804 / FAN5370
* Includes a 7 minute fixed timer.
125mm Halogen-EL Diffuser Chrome
150mm LED-EL Diffusers White
adjustable between 1-20 minutes, whereas the 150mm models include a fixed 7 minute timer. Both require: permanent phase and switched phase.
NOTE: All fan flow rates quoted are free air delivery. Performance will be affected by the length of ducting used.
Switching Options
1. Standard Model - operates from remote switch (not supplied).2. Timer Model - Fan operates from a switch, the fan continues to run
for a preset time after switching off. The 100 and 125mm models are
40
MANROSE CLASSIC INLINE FAN/LIGHT KITSEL EXTRACT-A-LITE/LED MODELS
Models A B C D E F G H
EL100 130 155 90 100 27 140 74 98
EL125 150 155 99 118 27 170 74 118
EL150 200 143 170 185 200 74 148
TECHNICAL SPECIFICATION & PERFORMANCE DATA
F
G
H
Dimensions - EL Extract-a-lite Diffuser
Performance - EL100 Performance - EL125
72 144 180 216 252 288 324 36010836
70 90
Performance - EL150
Models EL100 EL125 EL150
Fan CFD200 ID125 Hyper
Power 220 - 240V 220 - 240V 220 - 240V
Fan Performance 31 l/s, 110m3/hr 36 l/s, 130m3/hr 89 l/s, 320m3/hr
Fan Wattage 20W 25W 38W
Maximum Pressure 120 Pa 35 Pa 135 Pa
Fan Speed 1400 RPM 2000 RPM 2650 RPM
Light 12V 50W Halogen 12V 50W Halogen 12V 50W Halogen
12V 3W LED 12V 3W LED 12V 3W LED
Total Wattage 70W 75W 88W
Sound Level 45 dB(A) 41 dB(A) 46 dB(A)
Max. Operating Temp 40°C 40°C 70°C
IP Rating IPX4 IPX4 IPX2
DIMENSION INFORMATION (MM)
A
B D
CA
B
C
D
Dimensions - EL150 FanDimensions - EL100
AB CD
E
Dimensions - EL125
A
B
C
D
E
41Simx Limited | www.simx.co.nz | [email protected]
PRO-SERIES INLINE MIXED FLOW FANSMIXFLO™ FAN MODELS
Duct Size Model No. Switching Method
Speed Setting
Performance @ High Speed Order Code
100mm MF100S Standard 2 Speed 69 l/s, 250m3/hr FAN1004
100mm MF100T Timer 2 Speed 69 l/s, 250m3/hr FAN2124
100mm MF100PL Plug & Lead 2 Speed 69 l/s, 250m3/hr FAN1050
125mm MF125S Standard 2 Speed 89 l/s, 320m3/hr FAN1005
125mm MF125T Timer 2 Speed 89 l/s, 320m3/hr FAN2125
125mm MF125PL Plug & Lead 2 Speed 89 l/s, 320m3/hr FAN1051
150mm MF150S Standard 2 Speed 166 l/s, 597m3/hr FAN1006
150mm MF150T Timer 2 Speed 166 l/s, 597m3/hr FAN2126
150mm MF150PL Plug & Lead 2 Speed 166 l/s, 597m3/hr FAN1048
200mm MF200S Standard 3 Speed 272 l/s, 980m3/hr FAN1007
200mm MF200T Timer 2 Speed 272 l/s, 980m3/hr FAN2127
200mm MF200PL Plug & Lead 3 Speed 272 l/s, 980m3/hr FAN1053
• These powerful inline mixed flow fans have been designed to produce higher working pressures for applications that require higher airflows with low relative noise levels.
• Supported by a 4 year warranty or 30,000 continuous hours.
DIMENSION INFORMATION (MM)
Mixflow 200mm Standard Model
Dimensions - MF
D
E
F
A B
C
GModelsDimensions
A B C D E F G
MF100 98 182 315 100 100 168 27
MF125 122 182 350 100 100 168 60
MF150 147 209 360 130 115 195 55
MF200 197 244 354 142 140 230 50
42
1. Standard Model - operates from remote switch (not supplied).NOTE: All fan flow rates quoted are free air delivery.
43Simx Limited | www.simx.co.nz | [email protected]
0
20
40
60
80
100
120
140
160
180
200
0 20 40 60 80
Pre
ssur
e (P
a)
Airflow (L/s)
Airflow (m3/hr)
0 50 100 150 200 250 300
Pre
ssur
e (P
a)
Airflow (L/s)
Airflow (m3/hr)
0 50 100 150 200 250 300 350
0
50
100
150
200
250
0 20 40 60 80 100
Pre
ssur
e (P
a)
Airflow (L/s)
Airflow (m3/hr)
0
50
100
150
200
250
300
350
0 50 100 150 200
0 100 200 300 400 500 600 700
Performance - MF100 Performance - MF125 Performance - MF150
Pre
ssur
e (P
a)
Airflow (L/s)
Airflow (m3/hr)
0 200 400 600 800 1000
0
50
100
150
200
250
300
0 50 100 150 200 250 300*MF200 Timer model only has 2 speeds, therefore
Medium fan speed specifications will not apply.
Performance - *MF200
Speed 1 Speed 2 Speed 3
Icon Key
Model No Size (mm) RPM Watts Maximum
Airflow (m³/hr)Maximum
Pressure (Pa)Lp dB(A)
3m*IP
RatingMax Operating
Temp °C
MF100 1002300 40 250 180 40
33X4 45
1700 18 190 120
MF125 1252300 40 320 220 43
36X4 45
1700 18 260 160
MF150 1502700 70 597 300 47
40X4 60
2000 60 330 240
MF200 200
2700 85 980 250 48
45
41
X4 602350 60 860 140
2000 45 706 80
* Lp dB(A) @ 3 metres - sound pressure based on the high speed for each fan.
TECHNICAL SPECIFICATION & PERFORMANCE DATA
SOUND POWER LEVELS
Model No.Sound Power Levels LwA (dB) Octave band centre frequency in Hz
125 250 500 1000 2000 4000 8000
MF100 50 56 58 58 52 47 37
MF125 52 59 60 60 56 49 41
MF150 58 66 65 63 62 54 46
MF200 65 69 64 63 62 60 48
Switching Options
1. Standard Model - operates from remote switch (not supplied).NOTE: All fan flow rates quoted are free air delivery.
MANROSE CLASSIC INLINE HYPER FAN
Duct Size Model No. Switching Method Performance Order Code
150mm WhisperVent WVI150 Standard 94 l/s, 340m3/hr FAN0916
• This high efficiency inline fan is designed to provide higher levels of extraction with low relative noise.
• The ball bearing motor prolongs the life of the motor.• Supported by a 5 year warranty.
Duct Size Model No. Switching Method Performance Order Code
150mm Hyper150 Standard 89 l/s, 320m3/hr FAN0085
• This high efficiency inline fan is designed to provide high levels of extraction.• The ball bearing motor prolongs the life of the motor.• Includes 1.3m lead and 3 pin plug.• Supported by a 5 year warranty.
WhisperVent WVI150
Hyper 150
44
MANROSE PRO-SERIES INLINE WHISPER FAN
45Simx Limited | www.simx.co.nz | [email protected]
Models A B C D
WVI150 200 143 170 185
Hyper150 200 143 170 185
A
B D
CA
B
C
D
Dimensions
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Models WhisperVent WVI150 Hyper150
Power 220 - 240V 220 - 240V
Fan Performance 94 l/s, 340m³/hr 89 l/s, 320m³/hr
Fan Wattage 46W 38W
Maximum Pressure 160 Pa 135 Pa
Fan Speed 2750 RPM 2650 RPM
Sound Level 38 dB(A) 46 dB(A)
Max. Operating Temp 80°C 70°C
IP Rating IPX2 IPX2
72 144 180 216 252 288 324 36010836
70 90
Performance - WhisperVent WVI150
72 144 180 216 252 288 324 36010836
70 90
Performance - Hyper150
DIMENSION INFORMATION (MM)
1. Standard Model - operates from remote switch (not supplied).2. Timer Model - Fan operates from a switch, the fan continues to run
for a preset time after switching off - adjustable 1-20 minutes. Requires
three wires: permanent phase, switched phase, neutral. NOTE: All fan flow rates quoted are free air delivery.
ECO INLINE AXIAL FANS
MANROSE CLASSIC INLINE AXIAL FANSID MODELS
Duct Size Model No. Switching Method Performance Order Code
100mm ID100S Standard 23 l/s, 85m3/hr FAN0012
100mm ID100T Timer 23 l/s, 85m3/hr FAN0013
125mm ID125S Standard 36 l/s, 130m3/hr FAN0060
125mm ID125T Timer 36 l/s, 130m3/hr FAN0061
150mm ID150S Standard 87 l/s, 313m3/hr FAN0090
150mm ID150T Timer 87 l/s, 313m3/hr FAN0091
230mm ID230S Standard 152 l/s, 550m3/hr FAN0405
230mm ID230T Timer 152 l/s, 550m3/hr FAN0406
• With the fan mounted in the ceiling space, these inline models are able to draw steam directly from the source.
• These axial fans have ball bearing motors to prolong the life of the motor.• Supported by a 5 year warranty.
ID100/125/150
ID230
Duct Size Model No. Switching Method Performance Order Code
150mm ECO150S Standard 64 l/s, 230m3/hr FAN2078
• With the fan mounted in the ceiling space, these inline models are able to draw steam directly from the source.
• High quality sleeve bearing motor.• Supported by a 2 year warranty.
ECO150S
46
47Simx Limited | www.simx.co.nz | [email protected]
Models A B C D E
ID100 130 155 90 100 27
ID125 150 155 99 118 27
ECO150 (white) 187 153 109 150 27
ID150 187 153 109 150 27
ID230 (square model) 286 286 155 230 -
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Models ID100 ID125 ECO150 ID150 ID230
Power 220 - 240V 220 - 240V 220 - 240V 220 - 240V 220 - 240V
Fan Performance 23 l/s, 85m³/hr 36 l/s, 130m³/hr 64 l/s, 230m³/hr 87 l/s, 313m³/hr 152 l/s, 550m³/hr
Fan Wattage 20W 20W 25W 25W 80W
Maximum Pressure 20 Pa 35 Pa 50 Pa 60 Pa 50 Pa
Fan Speed 2400 RPM 2000 RPM 2400 RPM 2400 RPM 1250 RPM
Sound Level 41 dB(A) 41 dB(A) 40 dB(A) 40 dB(A) 50 dB(A)
Max. Operating Temp 50°C 50°C 50°C 50°C 50°C
IP Rating IPX4 IPX4 IPX4 IPX4 IPX4
Dimensions - ID Fans
Performance - ID100 Performance - ID125 Performance - ECO150
Performance - ID150 Performance - ID230
Note: PERFORMANCE - ID Fans maximum fan performance stated, this can vary depending on the length of ducting used.
DIMENSIONS SPECIFICATION (MM)
A
B
C
D
E
3. Requires: permanent phase and switched phase.NOTE: All fan flow rates quoted are free air delivery.
Switching Options
1. Standard Model - operates from remote switch (not supplied).2. Timer Model - Fan operates from a switch, the fan continues to run
for a preset time after switching off - adjust able 1-20 minutes.
Duct Size Model No. Switch Method Performance Order Code
100mm CFD200S Standard 31 l/s, 110m³/hr FAN0326
100mm CFD200T Timer 31 l/s, 110m³/hr FAN0327
125mm CFD225S Standard 39 l/s, 140m³/hr FAN2067
125mm CFD225T Timer 39 l/s, 140m³/hr FAN2066
• These high efficiency centrifugal fans are designed for use where longer duct runs are required.
• These centrifugal fans have ball bearing motor prolongs the life of the motor.
• Supported by a 5 year warranty.
Performance - CFD200 Performance - CFD225
TECHNICAL DATA
CFD200S
DIMENSION INFORMATION (MM)TECHNICAL SPECIFICATION
Models CFD200 CFD225
Power 220 - 240V 220 - 240V
Fan Performance 31 l/s, 110m³/hr 39 l/s, 140m³/hr
Fan Wattage 20W 20W
Maximum Pressure 120Pa 120Pa
Fan Speed 1400 RPM 1400 RPM
Sound Level 45 dB(A) 45 dB(A)
Max. Operating Temp 50°C 50°C
IP Rating IPX4 IPX4
Models A B C D E
CFD200 155 100 100 195 258
CFD225 155 125 125 195 258
Dimensions - CFD200/CFD225
AB CD
E
MANROSE CLASSIC INLINE CENTRIFUGAL FANS CFD MODELS
48
Duct Size Model No. Performance @ Speed 3 Order Code
150mm 3 Speed 115 l/s, 415m³/hr FAN0921
200mm 3 Speed 208 l/s, 750m³/hr FAN0997
• Suitable for a variety of domestic and commercial applications, these inline centrifugal fans provide high performance at your preset choice of speed.
• Supported by a 2 year warranty.
Please note: Can be used for supply or extract.
Models A B C D E
150mm 340 150 154 50 75
200mm 340 200 280 50 50
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Models 150mm 200mm
Voltage/Freq (50hz) 220 - 240V 220 - 240V
Fan Performance Speed 1 65 l/s, 234m³/hr 125 l/s, 450m³/hr
Fan Performance Speed 2 90 l/s, 324m³/hr 170 l/s, 620m³/hr
Fan Performance Speed 3 124 l/s, 425m³/hr 205 l/s, 740m³/hr
Fan Wattage (at high speed) 65W 110W
Current (A) (at high speed) 0.36 0.38
Fan Speed (at high speed) 2460 RPM 2700 RPM
Sound Level* 43 dB(A) 56 dB(A)
Ambient Temp 50°C 60°C
* dB(A) - measured 1m free field.
Performance - 150mm 3 Speed
400
300
200
100
0
Pre
ssu
re (
Pa
)
500 100 150 200
Volume (m3/hr)
Volume l/s
1000 200 300 400 500 600 700 800
Performance - 200mm 3 Speed
Dimensions - Simx Inline Centrifugal 3 Speed Fan
DIMENSION INFORMATION (MM)Simx Inline Centrifugal 3 Speed Fan
SIMX INLINE CENTRIFUGAL 3 SPEED FANSHIGH PERFORMANCE MODELS
49Simx Limited | www.simx.co.nz | [email protected]
Duct Size Model No Performance Order Code
100mm MAN100 49 l/s, 176m3/hr FAN0361
125mm MAN125 61 l/s, 220m3/hr FAN0360
150mm MAN150 115 l/s, 415m3/hr FAN0330
200mm MAN200 208 l/s, 750m3/hr FAN0467
250mm MAN250 280 l/s, 1010m3/hr FAN0358
315mm MAN315 360 l/s, 1300m3/hr FAN0357
315mm MAN315L 472 l/s, 1700m3/hr FAN0358
• Suitable for a variety of domestic and commercial applications, these inline centrifugal fans provide extremely high performance with a choice of sizes.
• Supported by a 2 year warranty.
Please note: Can be used for supply/extract.
Models A B C D E
MAN100 250 100 136 50 70
MAN125 250 125 147 60 60
MAN150 340 150 154 50 75
MAN200 340 200 250 50 50
MAN250 341 249 230 30 30
MAN315 405 315 275 30 30
MAN315L 405 315 275 30 30
DIMENSION INFORMATION (MM)
Dimensions - Simx 150mm Inline Fan
Simx 150mm Inline Fan
SIMX INLINE CENTRIFUGAL FANSHIGH PERFORMANCE MODELS
50
51Simx Limited | www.simx.co.nz | [email protected]
Models MAN100 MAN125 MAN150 MAN200 MAN250 MAN315 MAN315L
Voltage/Freq (50hz) 220-240V 220-240V 220-240V 220-240V 220-240V 220-240V 220-240V
Fan Performance 49 l/s, 176m³/hr
61 l/s, 220m³/hr
115 l/s, 415m³/hr
208 l/s, 750m³/hr
280 l/s, 1010m³/hr
360 l/s, 1300m³/hr
472 l/s, 1700m3/hr
Fan Wattage 32W 31W 65W 110W 170W 176W 318W
Maximum Pressure 153 Pa 143 Pa 320 Pa 418 Pa 500 Pa 590 Pa 720 Pa
Current (A) 0.14 0.13 0.35 0.45 0.76 0.77 1.39
Fan Speed (min -1) 2500 RPM 2490 RPM 2350 RPM 2520 RPM 2580 RPM 2387 RPM 2433 RPM
Sound Level* 38 dB(A) 38 dB(A) 50 dB(A) 47 dB(A) 48 dB(A) 52 dB(A)
Max Operating Temp 60°C 60°C 50°C 60°C 50°C 60°C 40°C
* dB(A) - measured 1m free field.
TECHNICAL SPECIFICATION & PERFORMANCE DATA
200mm
Volume l/s
Volume m3/h
0
50
100
150
200
250
300
350
400
450
0 50 100 150 200 250
0 100 200 300 400 500 600 700 800 900
Sta
tic
Pre
ssur
e (P
a)
Performance - MAN200 Performance - MAN250 Performance - MAN315 & MAN315L
250mm
0
50
100
150
200
250
300
350
400
450
500
0 50 100 150 200 250 300
0 200 400 600 800 1000
Volume l/s
Volume m3/h
Sta
tic
Pre
ssu
re (P
a)
250mm
MAN315
MAN315L
0
100
200
300
400
500
600
0 50 100 150 200 250 300 350 400
0 200 400 600 800 1000 1200 1400
Volume l/s
Volume m3/h
Sta
tic
Pre
ssur
e (P
a)
Performance - MAN100 Performance - MAN125 Performance - MAN150
100mm 125mm
Volume l/s
Volume m3/h
Volume l/s
Volume m3/h
0
20
40
60
80
100
120
140
160
0
20
40
60
80
100
120
140
160
0 10 20 30 40 50
0 50 100 150 200 250
0 10 20 30 40 50 60 70
0 20 40 60 80 100 120 140 160 180
Sta
tic
Pre
ssu
re (P
a)
Sta
tic
Pre
ssu
re (P
a)
100mm 125mm
Volume l/s
Volume m3/h
Volume l/s
Volume m3/h
0
20
40
60
80
100
120
140
160
0
20
40
60
80
100
120
140
160
0 10 20 30 40 50
0 50 100 150 200 250
0 10 20 30 40 50 60 70
0 20 40 60 80 100 120 140 160 180
Sta
tic
Pre
ssu
re (
Pa
)
Sta
tic
Pre
ssu
re (
Pa
)
200mm150mm
Volume l/s
Volume m3/h
0
50
100
150
200
250
300
3500 50 100 150 200 250 300 350
0 20 40 60 80 100 120
Sta
tic
Pre
ssur
e (P
a)
400
Duct Size Model No Performance Order Code
150mm WVILP150-1 124 l/s, 445m3/hr FAN0829
150mm WVILP150-3 118 l/s, 425m3/hr FAN0830
• Suitable for a variety of domestic and commercial applications, this inline centrifugal fan offers high performance with a low profile design to enable this unit to be installed in confined spaces.
• Supported by a 2 year warranty.
DIMENSION INFORMATION (MM)
Models A B C D E
WhisperVent Low Profile 313 168 148 340 218
Dimensions
A
E
B
D
Ø C
Simx 150mm WhisperVent low profile
52
SIMX INLINE CENTRIFUGAL FANSWHISPERVENT LOW PROFILE MODELS
53Simx Limited | www.simx.co.nz | [email protected]
Model NoSound Power Levels Lw (A)Octave band centre frequency in Hz dB(A) @ 3m63 125 250 500 1k 2k 4k 8k
FAN0830 - Speed 1 - 20 34 43 43 44 40 30 30
FAN0830 - Speed 2 - 26 40 51 51 52 45 38 36
FAN0830 - Speed 3 - 40 42 62 64 64 59 45 43
FAN0829 57 61 68 67 65 64 59 53 43
SOUND POWER LEVEL
Models Fan Speed Fan Performance Norm Fan
Speed (RPM)Single Phase
Nom Watts Nom Amps
FAN0830 1 65 l/s, 234m³/hr 1440 50 0.22
FAN0830 2 90 l/s, 324m³/hr 1860 56 0.24
FAN0830 3 124 l/s, 445m³/hr 2460 80 0.36
FAN0829 1 118 l/s, 425m³/hr 2520 80 0.36
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Performance - FAN0829 & FAN0830
400
300
200
100
Sta
tic
Pre
ssur
e P
a
28 56 83 111 139 167 194 222 250 278
Volume (l/s)
100 200 300 400 500 600 700 800 900 1000Volume (m3/hr)
12
3FAN0829
BRC-Q Roof Mounted Fan
• External rotor motorised impeller• Sickle shaped low sound impeller• Speed controllable• IP44 minimum motor protection• Sealed for life ball bearings• Integral inlet wireguard
The BAP series are plate mounted extract fans for general purpose applications. They are suitable for extract air situations with moderate air volumes and low pressures.
The motorised impellers are efficient, smooth running and have excellent low sound characteristics. Standard airflow in Form A. Form B on request.
Speed can be controlled by electronic or autotransformer voltage regulation.
ELECTRICAL & ACOUSTIC DATA
Model No. Speed (rev/min)
230V/50Hz/1Φ Sound Pressure Level (dBA@3m)
Induct Sound Power Level (dB re 10-12 Watts)
Order CodeMotor Input (W)
Full Load Current (A)
Max Temp (ºC)
63 125 250 500 1k 2k 4k 8k
BAP2541 1390 69 0.53 50 40 62 59 61 60 58 56 54 43 FAN3638
BAP3041 1250 75 0.32 50 38 66 64 59 55 52 50 46 38 FAN3640
BAP3541 1340 165 0.73 60 42 76 68 61 57 57 55 52 46 FAN3647
BAP4041 1430 160 0.73 40 49 76 72 66 65 65 61 57 52 FAN3648
BAP4541 1310 490 2.36 60 48 75 68 64 63 63 63 59 57 FAN4315
BAP5041 1300 680 3 60 47 77 72 63 61 61 60 58 52 FAN3656
BAP5661 895 410 1.8 60 46 68 75 61 62 64 58 51 49 FAN3661
BAP6361 860 600 2.62 50 46 71 68 63 64 62 58 52 52 FAN4074
DIMENSIONAL DATA
Model No.Dimensions
Weight kgA B C D E
BAP2541 370 320 250 260 90 4
BAP3041 430 380 305 325 90 5
BAP3541 485 435 350 360 90 6
BAP4041 540 490 400 410 110 9
BAP4541 575 535 450 460 110 10
BAP5041 655 615 500 510 115 14
BAP5661 725 670 560 575 115 16
BAP6361 805 750 630 645 125 21
BAP PLATE MOUNTED AXIAL EXTRACT FANSIZES 250MM - 630MM SINGLE PHASE
A
B
C D
E
AIRFLOW
54
55Simx Limited | www.simx.co.nz | [email protected]
PERFORMANCE DATA
0
20
40
60
80
100
120
140
160
180
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000
BAP2541
BAP5041
BAP3041
BAP3541
BAP4041
BAP4541
Volume Flow L/s
Stat
ic Pr
essu
re Pa
Volume Flow L/s
Stat
ic Pr
essu
re Pa
0
20
40
60
80
100
120
140
0 500 1000 1500 2000 2500 3000 3500 4000
BAP5661
BAP6361
BRC-Q Roof Mounted Fan
• New Ziehl-Abegg Vpro low sound aerofoil impeller• Higher Efficiency• No tonal noise• UV stabilized Rovel polymer cowling• Speed controllable• IP44 minimum motor protection• Sealed for life ball bearings
PERFORMANCE DATA
The BRC-Q series are centrifugal extract fans for roof curb installation. Fan cowling is manufactured from tough UV-stabilized polymer.
The Ziehl-Abegg motorised impellers are manufactured from high performance composite material for efficiency and smooth running. Impellers are optimised for low tonal noise giving excellent overall sound characteristics.
Speed can be controlled by electronic or autotransformer voltage regulation.Sizes 190 and 220 are fitted with three speed motors.
DIMENSIONAL DATA
Model No.Dimensions Weight
A* B* C D E kg
BRC1921Q 280 180 320 205 40 5
BRC2221Q 400 300 480 253 72 8
BRC2521Q 400 300 480 253 72 11
BRC2841Q 400 300 480 253 72 12
BRC3141Q 475 375 600 259 72 14
BRC3541Q 550 450 710 355 75 18
BRC4041Q 550 450 710 355 75 20
BRC4541Q 650 550 844 390 75 31
BRC4561Q 650 550 844 390 75 29
BRC5041Q 650 550 844 480 75 41
BRC5061Q 650 550 844 480 75 37
BRC5661Q 750 650 1030 550 75 43 * Upstand Construction Details
0
50
100
150
200
250
300
350
400
0 50 100 150 200 250 300 350 400
Sta
tic
Pre
ssur
e P
a
Volume Flow L/s
5061Q
4561Q 4061Q
5041Q
5661Q 4541Q
4041Q
3541Q
3141Q
0
100
200
300
400
500
600
0 200 400 600 800 1000 1200 1400 1600 1800 2000
Sta
tic
Pre
ssur
e P
a
Volume Flow L/s
1921Q-L 1921Q-M
1921Q-H
2221Q-L
2221Q-M 2841Q
2221Q-H 2521Q
Volume Flow L/s
Static
Pres
sure
PaBRC-Q ROOF MOUNTED CENTRIFUGAL EXTRACTFAN SIDE DISCHARGE - SIZES 190MM - 560MM SINGLE PHASE
56
57Simx Limited | www.simx.co.nz | [email protected]
ELECTRICAL & ACOUSTIC DATA
Model No.Speed (rev/min)
230V/50Hz/1 Sound Pressure Level(dBA@3m)
Induct Sound Power Level (dB re 10-12 Watts)
Order CodeMotor
Input (kW)
Full Load Current (A)
Max Temp (ºC)
63 125 250 500 1k 2k 4k 8k
BRC1921Q-H 2500 0.06 0.26 60 42 71 68 63 58 57 55 51 44 FAN4370
BRC1921Q-M 2010 0.05 0.25 60 37 69 66 60 51 51 50 48 35 FAN4376
BRC1921Q-L 1470 0.05 0.24 60 30 67 62 52 43 43 42 27 26 FAN4375
BRC2221Q-H 2560 0.1 0.45 60 44 76 69 62 61 57 56 53 49 FAN4377
BRC2221Q-M 2020 0.09 0.41 60 39 66 60 57 55 52 52 51 43 FAN4379
BRC2221Q-L 1480 0.08 0.38 60 35 61 61 48 51 53 47 41 37 FAN4378
BRC2521Q 2420 0.2 0.86 60 47 60 61 61 59 55 54 54 41 FAN3804
BRC2841Q 1360 0.11 0.53 60 39 59 70 60 61 55 51 53 43 FAN3546
BRC3141Q 1240 0.14 0.62 60 40 67 73 70 68 61 58 54 50 FAN3811
BRC3541Q 1390 0.27 1.3 60 42 66 62 57 54 50 46 38 38 FAN3814
BRC4041Q 1280 0.43 1.9 60 43 65 73 70 69 62 57 56 59 FAN3817
BRC4061Q 890 0.17 0.76 60 39 67 62 64 55 53 49 44 33 FAN3819
BRC4541Q 1230 0.62 2.8 60 47 68 77 74 73 65 62 58 56 FAN3821
BRC4561Q 920 0.3 1.4 60 41 61 70 66 65 57 54 49 46 FAN3823
BRC5041Q 1340 1.3 5.8 60 52 68 80 78 69 68 63 60 58 FAN3825
BRC5061Q 910 0.45 2.2 60 41 71 71 72 65 63 58 54 51 FAN3827
BRC5661Q 860 0.66 3 60 45 74 74 71 62 61 56 53 49 FAN38300
50
100
150
200
250
300
350
400
0 50 100 150 200 250 300 350 400
Sta
tic
Pre
ssur
e P
a
Volume Flow L/s
5061Q
4561Q 4061Q
5041Q
5661Q 4541Q
4041Q
3541Q
3141Q
0
100
200
300
400
500
600
0 200 400 600 800 1000 1200 1400 1600 1800 2000
Sta
tic
Pre
ssur
e P
a
Volume Flow L/s
1921Q-L 1921Q-M
1921Q-H
2221Q-L
2221Q-M 2841Q
2221Q-H 2521Q
Static
Pres
sure
Pa
Volume Flow L/s
PERFORMANCE DATA CONT.
• External rotor motorised impeller• Sickle shaped low sound impeller• UV stabilized Rovel polymer or polyethylene cowling• Speed controllable• IP44 minimum motor protection• Sealed for life ball bearings
The BRA series are roof mounted extract fans for general purpose applications. They are suitable for extract air situations with moderate air volumes and low pressures. The motorised impellers are efficient, smooth running and have excellent low sound characteristics.
Speed can be controlled by electronic or autotransformer voltage regulation.
Cowl material is UV stabilised Rovel polymer or polyethylene. Supply air versions are available.
DIMENSIONAL DATA
Model No.Dimensions Weight
A* B* C D E kg
BRA2541 400 300 480 253 72 8
BRA3041 475 375 600 259 72 14
BRA3541 550 450 710 355 75 18
BRA4041 550 450 710 355 75 18
BRA4541 650 550 844 390 75 31
Model No.Dimensions Weight
A* B* C D E kg
BRA5061 750 650 970 435 75 35
BRA5041 750 650 970 435 75 36
BRA5661 850 750 1150 470 75 41
BRA6361 850 750 1150 470 75 43
BRA Roof Mounted Fan
BRA ROOF MOUNTED AXIAL FAN SIDE DISCHARGESIZES 250MM - 630MM SINGLE PHASE
58
59Simx Limited | www.simx.co.nz | [email protected]
ELECTRICAL & ACOUSTIC DATA
Model No. Speed (rev/min)
230V/50Hz/1 Sound Pressure Level (dBA@3m)
Induct Sound Power Level (dB re 10-12 Watts)
Order CodeMotor Input (W)
Full Load Current (A)
Max Temp (ºC)
63 125 250 500 1k 2k 4k 8k
BRA2541 1390 50 0.23 40 43 62 59 61 60 58 59 54 43 FAN3751
BRA3041 1380 90 0.43 40 46 57 56 64 63 59 59 56 48 FAN3753
BRA3541 1360 140 0.78 40 49 59 56 60 63 63 64 62 53 FAN3759
BRA4041 1380 150 0.92 40 51 64 61 62 67 66 67 63 54 FAN3762
BRA4541 1350 180 1.4 40 55 80 78 77 70 69 69 66 61 FAN3769
BRA5061 905 230 1.5 40 50 60 56 64 62 62 64 59 51 FAN3778
BRA5041 1300 400 2.0 40 57 66 62 68 70 70 70 67 61 FAN3774
BRA5661 900 300 1.65 40 57 63 60 69 67 67 69 64 56 FAN3780
BRA6361 900 520 2.6 40 58 66 63 66 68 69 68 68 59 FAN3786
0
50
100
150
0 200 400 600 800 1000 1200 1400 1600 1800 2000
Sta
tic
Pre
ssur
e P
a
Volume Flow L/s
0
50
100
150
0 500 1000 1500 2000 2500 3000
Sta
tic
Pre
ssur
e P
a
Volume Flow L/s
35412541
3041 4041
4541 5041
50615661
6361
Volume Flow L/s
Stat
ic Pr
essu
re Pa
Volume Flow L/s
Static
Pres
sure
Pa
PERFORMANCE DATA
• New Ziehl-Abegg Vpro low sound aerofoil impeller.• Higher Efficiency.• Low tonal noise.• Galvanised sheet steel cowling.• Speed controllable.• IP54 minimum motor protection.• Sealed for life ball bearings.
The BRM-Q series are centrifugal extract fans for roof curb installation. Fan cowling is manufactured from galvanised sheet steel.
The Ziehl-Abegg motorised impellers are manufactured from high performance composite material for efficiency and smooth running. Impellers are optimised for low tonal noise giving excellent overall sound characteristics.
Speed can be controlled by electronic or autotransformer voltage regulation.
DIMENSIONAL DATA
Model No.Dimensions Weight
A B C D E kg
BRM3541Q 550 450 715 495 60 24
BRM4041Q 550 450 715 495 60 32
BRM4061Q 550 450 715 495 60 32
BRM4541Q 650 550 1030 535 60 46
BRM4561Q 650 550 1030 535 60 46
BRM5041Q 650 550 1030 535 60 52
BRM5061Q 650 550 1030 535 60 48
BRM5661Q 650 550 1030 535 60 50
Model No.Dimensions Weight
A* B* C D E kg
BRA5061 750 650 970 435 75 35
BRA5041 750 650 970 435 75 36
BRA5661 850 750 1150 470 75 41
BRA6361 850 750 1150 470 75 43
BRM-Q ROOF MOUNTED CENTRIFUGAL EXTRACT FAN VERTICALDISCHARGE SIZES 355MM - 560MM SINGLE PHASE
BRM Roof Mounted Fan
60
61Simx Limited | www.simx.co.nz | [email protected]
ELECTRICAL & ACOUSTIC DATA
Model No. Speed (rev/min)
230V/50Hz/1Φ Sound Pressure Level (dBA@3m)
Induct Sound Power Level (dB re 10-12 Watts)
Order CodeMotor Input (W)
Full Load Current (A)
Max Temp (ºC)
63 125 250 500 1k 2k 4k 8k
BRM3541Q 1390 0.27 1.3 60 42 66 62 57 54 50 46 38 38 FAN3836
BRM4041Q 1280 0.43 1.9 60 43 65 73 70 69 62 57 56 59 FAN3839
BRM4061Q 890 0.17 0.76 60 39 67 62 64 55 53 49 44 33 FAN2943
BRM4541Q 1230 0.62 2.8 60 47 68 77 74 73 65 62 58 56 FAN3842
BRM4561Q 920 0.3 1.4 60 41 61 70 66 65 57 54 49 46 FAN2958
BRM5041Q 1340 1.3 5.8 60 52 68 80 78 69 68 63 60 58 FAN3845
BRM5061Q 910 0.45 2.2 60 41 71 71 72 65 63 58 54 51 FAN3847
BRM5661Q 860 0.66 3 60 45 74 74 71 62 61 56 53 49 FAN3000
Volume Flow L/s
Static
Pres
sure
Pa
Volume Flow L/s
Static
Pres
sure
Pa
PERFORMANCE DATA
KDimensions
A B C D E F
100 M 99 218 26 166 26 218
100 XL 99 246 26 161 26 213
125 M 124 218 27 142 27 196
125 XL 124 246 26 151 26 203
150 M 149 286 25 152 25 202
KDimensions
A B C D E F
150 XL 14 336 29 171 26 226
200 M 199 336 30 148 27 205
200 L 199 336 30 174 27 231
250 M 249 336 30.5 119.5 27 177
250 L 249 336 30.5 144.5 27 202
315 M 314 408 32.5 160 27 220
315 L 314 408 37.5 160.5 27 225
PERFORMANCE DATA
K series is designed for installation in ducts and the KV is designed to be used as a wall mounted duct-connected extract fan. All the K/KV-fans have a minimum 25 mm long spigot connections.
The fans have backward-curved blades and external rotor motors. To simplify installation the K-fan has a fixing bracket together with screws for mounting the bracket included as standard.
• Speed-controllable.• Integral thermal contacts.• Can be installed in any position.• Can be installed outdoors.• Maintenance-free and reliable.
DIMENSIONAL DATA
K-SERIESMETAL INLINE CENTRIFUGAL FAN
K-Series Inline Centrifugal Fan
62
FAN5454 FAN5453 FAN5456 FAN5455 FAN5678 FAN5457
K/KV 200 M 200 L 250 M 250 L 315 M 315 L
Voltage/Frequency V/50 Hz 230 1~ 230 1~ 230 1~ 230 1~ 230 1~ 230 1~
Power W 106/102 145/143 104/103 145/148 201 318/310
Current A 0.463/0.453 0.631/0.628 0.453/0.451 0.463/0.453 0.882 1.39/1.35
max air flow m3/s 0.216/0.219 0.268/0.272 0.216/0.219 0.272/0.273 0.344/0.351 0.48
R.P.M min -1 2551 2555 2566/2575 2562/2556 2520/2506 2318/2367
max temp of transported air ºC 70 70 70 70 70 70
when speed controlled ºC 70 70 70 70 70 70
Sound pressure level @ 3m dB(A) 51/49 48/49 49/51 43/47 46.5/43 50/51
Weight kg 4.2/3.9 4.8/4.5 40.0/3.9 4.6 5.5 6.6
Enclosure class, motor IP 44 IP 44 IP 44 IP 44 IP 44 IP 44
Capacitor uF 3 3.5 3 3.5 5 7
Motor protection Integral Integral Integral Integral Integral Integral
Speed control, five-step Transformer RE 1.5 RE 1.5 RE 3 RE 3 RE 1.5 RE 1.5
FAN5451 FAN5452
K/KV 100 M 100 XL 125 M 125 XL 150 M 150 XL
Voltage/Frequency V/50 Hz 230 1~ 230 1~ 230 1~ 230 1~ 230 1~ 230 1~
Power W 29.9 58.6 29.1 62 61 104
Current A 0.171 0.253 0.172 0.271 0.264 0.458
max air flow m3/s 0.051 0.074 0.057 0.0978 0.122 0.199
R.P.M min -1 2443 2425 2483 2390 2412 2567
max temp of transported air ºC 70 70 70 70 70 70
when speed controlled ºC 70 70 70 70 70 70
Sound pressure level @ 3m dB(A) 38 48 34 50 42 55
Weight kg 2.5 2.5 2.5 2.5 3.5 4.5
Enclosure class, motor IP 44 IP 44 IP 44 IP 44 IP 44 IP 44
Capacitor uF - 2 - 2 2 3
Motor protection Integral Integral Integral Integral Integral Integral
Speed control, five-step Transformer RE 1.5 RE 1.5 RE 1.5 RE 1.5 RE 1.5 RE 1.5
ELECTRICAL, TECHNICAL & PERFORMANCE DATA
63Simx Limited | www.simx.co.nz | [email protected]
ACM250 Mixed Flow Fan
The Vent-Axia ACM range of Mixed Flow Inline fans are designed for use with both rigid and flexible ducting.
They offer two and half times the pressure of conventional axial fans and are dimensionally more compact (making them ideal for many ducted applications).
The impeller blade design with guide vanes provides optimum pressure characteristics. The ACM Mixed Flow inline fan can operate in both horizontal and vertical positions.
Duct Size (mm) Description Order Code
250 ACM250 Mixed Flow Fan FAN2239
315 ACM315 Mixed Flow Fan FAN2241
• Simple Installation.• Diagonal impeller with stator.• Galvanised metal housing.• Integrated thermal switch. • Designed to meet IP54.• Optimise fan performance by using an approved Vent-Axia controller.• Supported by a 4 year warranty.
Motor
All motors are fitted with Standard Thermal Overload Protection. (S.T.O.P.). Motors are speed controllable. Designed for ambient temperatures up to +50°C. All sizes with capacitor run motors.
All sizes are Class I appliances. Supply voltage 220-240V/1/50Hz.
VENT-AXIA INLINE MIXED FLOW FANSACM METAL MODELS
Controller
Surface mounted providing variable speed control with an On/Off.
64
65Simx Limited | www.simx.co.nz | [email protected]
278250
307
280
ACM250 Mixed Flow Fan ACM315 Mixed Flow Fan
315
ACOUSTICS SOUND POWER LEVEL DB(A)
Model No. Hz 63 125 250 500 1K 2k 4K 8K
ACM250
Inlet - 45 57 64 67 66 63 54
Outlet - 56 64 72 74 71 64 57
Breakout - 41 46 47 49 48 42 38
ACM315
Inlet - 49 63 68 70 69 66 57
Outlet - 51 69 73 75 73 66 58
Breakout - 44 46 49 53 51 49 45
Model No Performance l/s @ Pa WattsW
AmpsA
NominalRPM
SounddB(A) @3m
Pa 0 25 50 100 150 200 250 300 400
ACM250 l/s 450 440 430 405 378 347 314 118 37 145 0.8 2720 52
ACM315 l/s 653 639 630 605 577 545 505 453 150 270 1.2 2820 56
PERFORMANCE DATA
DIMENSION INFORMATION (MM)
DIMENSION INFORMATION (MM)
110mm
369mm
305mm
C
A
B
SIMX EXTERNAL WALL MOUNTED FANSEXTRACT MODELS
Connection
1. Electrical connection must be made internally (Junction Box is only suitable for internal use).
NOTE: All fan flow rates quoted are free air delivery.
SIMX EXTERNAL WALL MOUNTED FANS3 SPEED EXTRACT MODELS
*Also available in a Supply Air option
Duct Size Fan Type Air Performance Order Code
150mm Axial Extract* 73 l/s, 263m3/hr FAN2303
150mm Ctr’fgl (190 Motor) Extract 109 l/s, 392m3/hr FAN2301
150mm Ctr’fgl (220 Motor) Extract 133 l/s, 480m3/hr FAN2302
Duct Size Fan Type Air Performance(High Speed) Order Code
150mm Ctr’fgl (190 Motor) Extract 113 l/s, 408m3/hr FAN2316
150mm Ctr’fgl (220 Motor) Extract 136 l/s, 493m3/hr FAN2317
• Designed for use in residential and light commercial applications where a high performance, low noise solution is required.
• Specific applications include apartments where space is limited.• Supported by a 2 year warranty.
• Designed for use in residential and light commercial applications where a high performance, low noise solution is required.
• Three speed models enable further flexibility in a variety of applications.• Specific applications include apartments where space is limited.• Supported by a 2 year warranty.
Fan Assembly - Line Drawing
150mm Centrifugal (190 Motor)
Models A B C
150mm Axial 369 110 305
150mm Ctr’fgl (190 Motor) 369 110 305
150mm Ctr’fgl (220 Motor) 369 110 305
66
Order Code Motor Size (mm) Description
Fan Performance Watts @ 230V Amps Static
Pressure (Pa)Sound Level (dB(A) @ 3m)m³/hr l/s
FAN2303 150 Axial 263 73 48 0.29 80 48
FAN2301 150 Centrifugal 190 Motor (1 Speed) 392 109 65 0.28 280 60
FAN2302 150 Centrifugal 220 Motor (1 Speed) 423 118 96 0.42 380 61
FAN2316 150 Centrifugal 190 Motor (3 Speed)
High Speed 408 113 65 0.28 280 60
Medium Speed 340 94 57 0.25 250 56
Low Speed 277 77 55 0.24 200 46
FAN2317 150 Centrifugal 220 Motor (3 Speed)
High Speed 493 136 96 0.42 380 61
Medium Speed 408 113 69 0.34 340 56
Low Speed 340 94 60 0.31 280 50
TECHNICAL SPECIFICATION & PERFORMANCE DATA
FAN2303 150mm AXIAL
FAN2301 150mm CENTRIFUGAL (190 Motor)
FAN2302 150mm CENTRIFUGAL (220 Motor)
01
02
03
FAN2316 150mm 3 SPEED CENTRIFUGAL (190 Motor)
FAN2317 150mm 3 SPEED CENTRIFUGAL (220 Motor)
01
02
0
50
100
150
200
250
300
350
400
50 1000 150
Airflow (L/s)
Pre
ssur
e (P
a)
01
02
03
0
50
100
150
200
250
300
350
400
50 1000 150
Airflow (L/s)
Pre
ssur
e (P
a) 02
01
67Simx Limited | www.simx.co.nz | [email protected]
THRU-ROOF MOUNTED FANSTHRU ROOF FAN COWL MODELS
Connection
1. Electrical connection can be made inside or outside the roof space.* NOTE: All fan flow rates quoted are motor performance in free air.
THRU ROOF FAN SYSTEM MODELS
WITH FLASHING & HDPE TUBE
Duct Size Fan Type Air Performance Order Code
150mm Ctr’fgl Extract 153 l/s, 550m3hr FAN0529
150mm Ctr’fgl 3-spd Extract 153 l/s, 550m3hr FAN1002
150mm Axial - Whisper Extract 89 l/s, 320m3/hr FAN1009
150mm Axial Extract 75 l/s, 270m3/hr FAN0531
150mm Axial - Whisper Supply 75 l/s, 270m3/hr FAN0533
Duct Size Description Fan Type Performance* Order Code
150mm Ultra Ctr’fgl 153 l/s, 550m3/hr FAN0535
150mm Hyper Hyper 75 l/s, 270m3/hr DCT0189
• High quality aluminium cowl construction, with fan incorporated, for longevity of operation.• Includes Flashing for metal based roofs, an optional lead Flashing is available for concrete tile
roofs (DCT0190) at an additional cost.• Supported by a 2 year warranty.
• High quality aluminium cowl construction, with fan incorporated, for longevity of operation.• Supported by a 2 year warranty.
Duct Size Fan Type Air Performance Order Code
150mm Ctr’fgl Extract 153 l/s, 550m3hr FAN0530
150mm Ctr’fgl 3-spd Extract 153 l/s, 550m3/hr FAN0967
150mm Axial - Whisper Extract 89 l/s, 320m3/hr FAN1060
150mm Axial Extract 75 l/s, 270m3/hr FAN0532
150mm Axial Supply 75 l/s, 270m3/hr FAN0534
150mm H/D Axial Extract 75 l/s, 270m3/hr FAN0739
150mm H/D Ctr’fgl Extract 153 l/s, 550m3/hr FAN0740
H/D = Heavy Duty cowl used in these kits.
• High quality aluminium cowl construction, with fan incorporated for longevity of operation.• Includes Flashing for metal based roofs, an optional lead Flashing is available for concrete tile
roofs (DCT0190) at an additional cost.• Supported by a 2 year warranty.
150mm Axial - Whisper
150mm Axial - Whisper
150mm Hyper Fan System
68
A
B
C
Models A B C
FAN0529 - FAN1002 275 170 -
FAN1009 275 170 -
FAN0531- FAN0533 275 170 -
FAN0530 - FAN0967 275 170 500
FAN1060 275 170 500
FAN0532 - FAN0534 275 170 500
FAN0739 - FAN0740 275 170 500
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Dimensions - Thru Roof Fans
FAN1009/FAN1060
FAN0530 / FAN0555
0
50
100
150
200
250
300
350
0 50 100 150 200
Pres
sure
(Pa)
Airflow (L/s)
FAN0529/FAN0530/FAN0740 FAN0532 / FAN0553
0
10
20
30
40
50
60
70
80
90
0 20 40 60 80 100 120
Pres
sure
(Pa)
Airflow (L/s)
FAN0531/FAN0532/FAN0739
0
20
40
60
80
100
120
140
160
0 50 100 150
Pres
sure
(Pa)
Airflow (L/s)
FAN1009 / FAN1060FAN0532 / FAN0553
0
10
20
30
40
50
60
70
80
90
0 20 40 60 80 100 120
Pres
sure
(Pa)
Airflow (L/s)
FAN0533/FAN0534
ModelsFAN0529FAN0530FAN0740
FAN1002FAN0967
FAN0531FAN0532FAN0739
FAN0533FAN0534
FAN1009FAN1060
Supply Voltage 220-240VAC 220-240VAC 220-240VAC 220-240VAC 220-240VAC
Fan Centrifugal Centrifugal Axial Axial Axial - Whisper
Fan Performance 153 l/s, 550m3/hr 153 l/s, 550m3/hr 75 l/s, 270m3/hr 75 l/s, 270m3/hr 89 l/s, 320m3/hr
Fan Wattage 58W 58W 44W 44W 46W
Maximum Pressure 320 Pa 320 Pa 80 Pa 130 Pa 130 Pa
Fan Speed 2500 RPM 2500 RPM 2850 RPM 2850 RPM 2750 RPM
Sound Level @ 1m 62 dB(A) 62 dB(A) 55 dB(A) 55 dB(A) 38 dB(A)
Operating Temp -25 - +50°C -25 - +50°C -20 - +80°C -20 - +80°C -20 - +80°C
IP Rating IPX4 IPX4 IPX2 IPX2 IPX2
DIMENSION INFORMATION (MM)
69Simx Limited | www.simx.co.nz | [email protected]
• Kit comes complete with a ASA plastic cowl construction, with or without fan incorporated, mounting tubes, aquaseal roof flashing & power lead flashing.
• The orientation of the fan section can be reversed to facilitate extract or supply.• Supported by a 2 year warranty.
• High quality ASA plastic cowl construction, with fan incorporated, for longevity of operation.• The orientation of the fan section can be reversed to facilitate extract or supply.• Supported by a 2 year warranty.
COMMERCIAL THRU ROOF FAN KITS
Duct Size Description Fan Type Performance Order Code
250mm Commercial Cowl - - DCT2238
250mm Commercial Fan Cowl Ctr’fgl 178 l/s, 640 m3/hr FAN2120
250mm Commercial Fan Cowl - High Performance Ctr’fgl 265 l/s, 954 m3/hr FAN2121
250mm Filter Ring - - DCT2254
250mm Insect Mesh - - DCT2253
Duct Size Description Fan Type Performance Order Code
250mm Commercial Kit - - DCT2241
250mm Commercial Fan Kit Ctr’fgl 178 l/s, 640 m3/hr FAN2122
250mm Commercial Fan Kit - High Performance Ctr’fgl 265 l/s, 954 m3/hr FAN2123
250mm Filter Ring - - DCT2254
250mm Insect Mesh - - DCT2253
250 mm Hyper Fan System
250mm Commercial Fan Kit
THRU ROOF MOUNTED FANSCOMMERCIAL THRU ROOF FAN
1. Standard Model - operates from remote switch (not supplied).
70
TECHNICAL SPECIFICATION & PERFORMANCE DATA
Models FAN2120/FAN2122 FAN2121/FAN2123
Supply Voltage 220-240VAC 220-240VAC
Fan Centrifugal Centrifugal
Fan Performance 178 l/s, 640 m3/hr 265 l/s, 954 m3/hr
Fan Wattage 75W 135W
Maximum Pressure 300 Pa 545 Pa
Fan Speed 2600 RPM 2650 RPM
Sound Level @ 1m 72 dB(A) 70 dB(A)
Operating Temp -25 - +40° -25 - +60°
Models A B C
250mm 400 400 248
B
C
A
Dimensions - Thru Roof
Sta
tic
Pre
ssu
re (
Pa)
Airflow l/s
350
300
250
200
150
100
50
0
0 25 50 75 100 125 150 175 200
250mm - 220 motor
Sta
tic
Pre
ssu
re (
Pa)
Airflow l/s
700
600
500
400
300
200
100
0
0 50 100 150 200 250 300 350 400
250mm - 225 Motor
Sta
tic
Pre
ssu
re (
Pa)
Airflow l/s
350
300
250
200
150
100
50
0
0 25 50 75 100 125 150 175 200
250mm - 220 motor
250mm - 225 Motor
Sta
tic
Pre
ssu
re (
Pa)
Airflow l/s
700
600
500
400
300
200
100
0
0 50 100 150 200 250 300 350 400
Performance - FAN2120/FAN2122
Sta
tic
Pre
ssu
re (
Pa)
Airflow l/s
350
300
250
200
150
100
50
0
0 25 50 75 100 125 150 175 200
250mm - 220 motor
Sta
tic
Pre
ssu
re (
Pa)
Airflow l/s
700
600
500
400
300
200
100
0
0 50 100 150 200 250 300 350 400
250mm - 225 Motor
Sta
tic
Pre
ssu
re (
Pa)
Airflow l/s
350
300
250
200
150
100
50
0
0 25 50 75 100 125 150 175 200
250mm - 220 motor
250mm - 225 Motor
Sta
tic
Pre
ssu
re (
Pa)
Airflow l/s
700
600
500
400
300
200
100
0
0 50 100 150 200 250 300 350 400
Performance - FAN2121/FAN2123
COWL ON Test Conditions Noise RatingdB(A) 125 250 500 1000 2000 4000 8000
SupplyInlet + CR 56 65.7 67.5 69.0 62.9 60.1 51.9 43.2
Discharge 55 61.1 62.0 67.8 62.4 61.8 60.7 43.9
ExtractInlet 54 62.4 62.3 67.1 61.9 60.6 58.1 48.5
Discharge + CR 54 67.2 68.5 66.1 61.4 60.9 51.2 42.3
COWL ON Test Conditions Noise Rating 125 250 500 1000 2000 4000 8000
SupplyInlet + CR 61 73.3 76.5 74.7 70.8 65.5 60.2 51.1
Discharge 60 68.9 71.5 72.4 69.9 67.9 65.5 56.1
ExtractInlet 58 69.9 72.8 69.5 68.3 65.6 62.7 54.6
Discharge + CR 60 76.2 78.1 71.7 69.5 66.8 59.0 50.2
ACOUSTIC PERFORMANCE - FAN2121/FAN2123
ACOUSTIC PERFORMANCE - FAN2120/FAN2122 Please note: CR Represents - Casing Radiation
DIMENSION INFORMATION (MM)
71Simx Limited | www.simx.co.nz | [email protected]
• Suitable for use in public areas for heavy usage. • Supported by a 5 year warranty.
Model No. Cover Colour Switching Method Air Volume Order Code
TEMPEST Stainless Steel White Auto 56 l/s, 200m3/hr FAN2287
TEMPEST SATIN Stainless Steel Stainless Steel Satin Auto 56 l/s, 200m3/hr FAN2286
• These models are suitable for use in public areas such as lavatories, factories, schools railways and motorway service stations and are designed for heavy usage and unsupervised areas.
• Supported by a 2 year warranty.
Model No. Cover Colour Switching Method Performance Order Code
MAN/M-88A ABS Thermoplastic White Auto 56 l/s, 200m3/hr FAN2902
MAN/A-89 3mm Aluminium White Auto 108 l/s, 388m3/hr FAN4396
MAN/A-89S 3mm Aluminium Silver Auto 108 l/s, 388m3/hr FAN4395
MAN/A-89B 3mm Aluminium Black Auto 108 l/s, 388m3/hr FAN4397
MAN/E-88A 2mm Steel Porcelain Enamel White Auto 130 l/s, 470m3/hr FAN2903
These new dryers have been developed with speed in mind. They provide a rapid drying time of 10-15 seconds, thus reducing washroom time. Tempest offers the user up to 70% energy saving when compared to conventional dryers.
The heater elements can be set to between 450W and 900W, enabling the unit to be used in a variety of washroom applications from schools to construction sites.
Another feature is the blue led which provides a visible indication of the drying zone ensuring that the user’s hands are always in the warm air stream.
MANROSE CLASSIC HAND DRYERSPUBLIC AREAS/HEAVY USAGE APPLICATIONS
Vent Axia Hand Dryer - TEMPEST
Vent Axia Hand Dryer - TEMPEST SATIN
Manrose MAN/E-88A
Manrose MAN/M-88A
VENT-AXIA HAND DRYERSPUBLIC AREAS/HEAVY USAGE APPLICATIONS
72
Model A B C
TEMPEST 201 277 175
MAN/M-88A 225 275 160
MAN/A-89 225 275 160
MAN/E-88A 284 248 202
Models MAN/M-88A MAN/A-89 MAN/E-88A
Power 220 - 240V 220 - 240V 220 - 240V
Cover ABS Thermoplastic 3mm Aluminium Steel 2mm Porcelain Enamel
Colour White White, Silver, Black White
Fan Performance 56 l/s, 200m³/hr 108 l/s, 388m3/hr 130 l/s, 470m³/hr
Operation No touch infra-red detection
No touch infra-red detection
No touch infra-red detection
Power 1.5kW @ 240V 2.0kW @ 240V 2.4kW @ 240V
Sound Level 54 dB(A) 69 dB(A) 70 dB(A)
Weight 3.3kg 4.7kg 7.5kg
TECHNICAL SPECIFICATION - MANROSE
Depth
A
C
B
Dimensions - MAN/M-88A, A-89, A-89S A-89B
Depth
A
B
C
Dimensions - MAN/E-88A
DIMENSION SPECIFICATION (MM)
A
B
C
Dimensions - Tempest
Models TEMPEST TEMPEST SATIN
Power 220 - 240V 220 - 240V
Cover Stainless Steel Stainless Steel
Colour White Stainless Satin Steel
Air Volume 56 l/s, 200m3/hr 56 l/s, 200m3/hr
Operation No touch infra-red detection
No touch infra-red detection
Heater Element 450 - 900W adjustable
450 - 900W adjustable
Power 1.6kW @ 240V 1.6kW @ 240V
Dry Time 10 -15 secs 10-15 secs
Sound Level 74 dB(A) 74 dB(A)
Weight 7.0kg 7.0kg
TECHNICAL SPECIFICATION - VENT-AXIA
73Simx Limited | www.simx.co.nz | [email protected]
HIGH SPEED DRYERFAST DRY TIME
• Low energy consumption.• Outstanding performance.• Chip control technology and infrared sensor.• Supported by a 2 year warranty.
Model No. Cover Colour Switching Method Air Volume Order Code
High Speed Dryer ABS White Auto 324 km/hr FAN5653
High Speed Dryer ABS Silver Auto 324 km/hr FAN5654
High Speed Dryer Silver
High Speed Dryer White
• Low energy consumption.• Outstanding performance.• Chip control technology and infrared sensor.• Supported by a 2 year warranty.
Model No. Cover Colour Switching Method Air Volume Order Code
Hand DryerSide Draft
Stainless Steel Silver Auto 342 km/hr FAN5655
HAND DRYERSIDE DRAFT
Hand Dryer Side Draft - Silver
74
75Simx Limited | www.simx.co.nz | [email protected]
Model A B C
High Speed Dryer 248 250 178
DIMENSION SPECIFICATION (MM)
Models High Speed Dryer
Power 220 - 240V
Cover ABS
Colour White or Silver
Air Speed 324 km/hr
Drying Distance 12 cm (+/- 3cm)
Power 1100W @ 240V
Dry Time 6 - 9 Seconds
Frequency 50/60 Hz
Weight 3.2 kg
TECHNICAL SPECIFICATION - HIGH SPEED DRYER
CA
B
Models Side Draft
Power 220 - 240V
Cover Stainless Steel
Colour Silver
Air Speed 342 km/hr
Power 1650W @ 240V
Dry Time 6 - 9 Seconds
Frequency 50/60 Hz
Weight 11.2 kg
TECHNICAL SPECIFICATION - SIDE DRAFT
Model A B C
Side Draft 300 730 222
DIMENSION SPECIFICATION (MM)
AC
B
SPECIALISED FANSFRAME FAN MODEL
NOTE: All fan flow rates quoted are free air delivery.
Duct Size Model No. Switching Method Performance Order Code
120mm Frame Fan Standard 38 l/s, 138m³/hr FAN0397
150mm Frame Fan Standard 89 l/s, 320m³/hr FAN1043
Duct Size Description Order Code
120mm Finger Guard for FAN0397 - Metal FAN0412
120mm Filter Guard for FAN0397 FAN0413
150mm Finger Guard for FAN1043 FAN0841
ACCESSORIES
• This frame fan is designed for use in computer rooms or applications where the introduction of cool air is required for small enclosed spaces.
• The ball bearing motor prolongs the life of the motor.• Supported by a 2 year warranty. Frame Fan 125mm
Performance - 125mm Frame Fan
72 144 180 216 252 288 324 36010836
70 90
Performance - 150mm Frame Fan
Frame Fan Accessories
Models Frame Fan 125 Frame Fan 150
Power 220 - 240V 220 - 240V
Fan Performance 38 l/s, 138m³/hr 89 l/s, 320m³/hr
Fan Wattage 15W 38W
Maximum Pressure 62Pa 135Pa
Fan Speed 2650 RPM 2650 RPM
Sound Level 43 dB(A) 46 dB(A)
Max. Operating Temp 80°C 70°C
IP Rating IPX4 IPX2
Models A B C D
Frame Fan 125 120 120 105 40
Frame Fan 150 172 150 160 51
B
D A
C
Dimensions - Frame Fan
DIMENSION INFORMATION (MM)TECHNICAL SPECIFICATION
76
FAN TIMER
Model No. Description Order Code
Time Air 7 Minute Fixed Timer (suits fans 20W-200W) FAN0372
• A fixed fan timer that will automatically switch the appliance off after approximately 7 minutes.
Description Order Code
Fully Adjustable Run-On Fan Timer FAN2444
• Timing Switch 1 Sec to 90 Mins.• Adjustable Run Timer & Start Delay.
ELECTRONIC TRANSFORMER
Model No. Description Order Code
ACTO TE0060 Electronic Transformer 12VAC 50kHz FAN2101
• This transformer must only be used with 12V lighting installations.• Supports lamp wattages from 20W - 60W.• Overload & short circuit protection with self resetting.• Over temperature cut off.• Dimmable with trailing and leading edge dimmers.
Description Order Code
SELV Isolating Transformer 12VAC FAN0436
• SELV isolating transformer is required for all low voltage fan installations.• Can be used with low voltage 12V lighting.• Supports lamp wattages from 20W - 50W.• An iron core transformer.• Thermally stable and shatter-proof plastic casings.• Overload & short circuit protection with self resetting.• Over temperature cut off.• Dimmable with trailing and leading edge dimmers.
ISOLATING TRANSFORMERS
SELV Isolating Transformer 12VAC
Electronic Transformer
Fully adjustable Run-On Fan Timer
Time Air - Fan Timer
77Simx Limited | www.simx.co.nz | [email protected]
FAN ACCESSORIESTHERMOSTATS
Model No. Description Switching Method Order Code
1348 For XF/XP/WF 230/300 Fans* 2 Spd + Reverse FAN0155
1349 For XF/XP/WF 230/300 Fans* Adjust + Reverse FAN0156
1350 For any XF/XP/WF 230/300 Fans Adjustable FAN0157
PDL625F General Purpose up to 500W On-Off + Adjust FAN2104
FAN MOUNTING BRACKETS
• These adjustable fan mounting brackets, designed for use with the centrifugal fans.• Supplied in pairs.
Duct Size Description Order Code
100-200mm Fan Mounting Bracket for 100 - 200mm FAN0015
250-315mm Fan Mounting Bracket for 250 - 315mm FAN0016
• A range of speed controllers with variable or 2 speed and reversible options.• Models 1348 - 1350: Electrical load must be between 20 and 200 watts.• FAN0154 - Single pattress mounting block for FAN0155/0156/0157.
*Not suitable for manual pull cord model fans.
Model No. Description Order Code
UT-T1 Touch Screen Automated Thermostat FAN5555
SPEED CONTROLLERS
PDL625F General Purpose
100-200mm Fan Mounting Bracket
Mechanical Thermostat
• High quality, easy to use heat transfer thermostat.• Dual air source control for both heating and fresh air situations*.• Electronic temperature sensor.• Included in HeatTrans systems.
* Requires the Heat Transfer Summer Upgrade Kit, order code: DCT1481.
78Simx Limited | www.simx.co.nz | [email protected]