does your device fit in our 8 slot baskets? check it here ...€¦ · step 2 - check the device...
TRANSCRIPT
![Page 1: DOES YOUR DEVICE FIT IN OUR 8 SLOT BASKETS? CHECK IT HERE ...€¦ · STEP 2 - Check the device dimensions Place your device here. If the device ˜ts within the black boundaries of](https://reader034.vdocuments.us/reader034/viewer/2022051511/600f29fcbc3e0648bf7ac8c6/html5/thumbnails/1.jpg)
22 m
m o
r0.
86 in
ches
202 mm or 7.95 inches
256
mm
or 1
0.07
inch
es
DOES YOUR DEVICE FIT IN OUR 8 SLOT BASKETS? CHECK IT HERE. TEMPLATE A - WITH FOAM.To ensure accurate measurements, please print to scale and on a Ledger size page (portrait).
STEP 1 - Check the device thicknessCheck the thickness of your device here. If the device thickness �ts within the boundaries of this shape, then youare almost there. Move on to STEP 2. If it doesn’t �t, remove the foam insert and measure using TEMPLATE B.
STEP 2 - Check the device dimensionsPlace your device here. If the device �ts within the black boundaries of thisshape, proceed to Step 3.
If it doesn’t �t, remove the foam insert and measure using TEMPLATE B.
STEP 3 - Check device charging pointEnsure that the charging point is above the dashed line. If it does, then youare good to go.
www.lockncharge.com
PLEASE NOTE:It is your responsibility to ensure you measure your device correctly.
If you are planning to use a case with your device, ensure you have it on whilstchecking the compatibility.
If the device is too thick with the case installed, but �ts with the STEP 2 and 3,there is one more option and that is to remove the foam insert from the basketand measure using TEMPLATE B.
If you are still unsure, contact LocknCharge.
![Page 2: DOES YOUR DEVICE FIT IN OUR 8 SLOT BASKETS? CHECK IT HERE ...€¦ · STEP 2 - Check the device dimensions Place your device here. If the device ˜ts within the black boundaries of](https://reader034.vdocuments.us/reader034/viewer/2022051511/600f29fcbc3e0648bf7ac8c6/html5/thumbnails/2.jpg)
DOES YOUR DEVICE FIT IN OUR 8 SLOT BASKETS? CHECK IT HERE. TEMPLATE B - REMOVE FOAM. THIS OPTION IS RECOMMENDED IFYOU ARE STORING DEVICES WITH LARGER CASES.To ensure accurate measurements, please print to scale and on a Ledger size page (portrait).
35 m
m o
r1.
37 in
ches
268
mm
or 1
0.55
inch
es
216 mm or 8.5 inches
STEP 1 - Check the device thickness
go to STEP 2.
STEP 2 - Check the device dimensions
shape, proceed to STEP 3.
STEP 3 - Check device charging pointEnsure that the charging point is above the dashed line. If it does, then you’regood to go.
www.lockncharge.com
PLEASE NOTE:It is your responsibility to ensure you measure your device correctly.If you are still unsure, contact LocknCharge.