Dodge Challenger Rear Camera Installation

Since all Car DVD players support the rear camera input and will automatically turn to rear view when reversing a car, this makes back a car more safe and convenient. The question is how to install the rear camera for Dodge Challenger? Will rear camera disfeature your precious car? Just continue reading.

• To install a rear camera, the key point is connecting three parts – Car DVD Player, Rear Camera and Car Back Lamp with each other.

• To install a rear camera, the key point is connecting three parts – Car DVD Player, Rear Camera and Car Back Lamp with each other.

• First, link Rear Camera with Car Back Lamp. Both have power (red) cable and GNP (black) cable, use wire cutters to cut the wires, leaving enough excess wire to reconnect. Strip the ends of the wire to expose the bare wire using wire strippers. Splice the wires together using a two-into-one connector. This will give the rear-view camera power.

• Second, link Car DVD Player with Car Back Lamp. Join "Back control wire" line from car dvd player to "switch wire of the back lamp" line of your Dodge Challenger.

• Third, connect Car DVD Player with Rear Camera. Join "video output" line from camera to "camera in" line of the car dvd player. Detail information is in the wiring diagram picture, as long as you have figured out the link principles, it is no longer difficult to understand it.

Usually, you have to drill a hole in your Dodge Challenger to install a rear camera, however, this type of rear camera is specially designed, it skillfully replace the light in back bonnet without holes. So this will not change the original look of your car, and perhaps that is one of th

e reasons why this product is popular with buyers.

With the help of rear view camera, Dodge Challenger DVD player shall show you what is happening in the back, a useful gadget for drivers. Any question about how to install rear camera for Dodge Challenger is welcomed, contact me either by post your words afterwards or send a

message.