documentum advanced document transformation services release notes 6.7 sp1

EMC® Documentum®

Advanced Document TransformationServicesVersion 6.7 SP1

Release Notes

EMC CorporationCorporate Headquarters:

Hopkinton, MA 01748-91031-508-435-1000www.EMC.com

EMC believes the information in this publication is accurate as of its publication date. The information is subject to changewithout notice.

The information in this publication is provided as is. EMC Corporation makes no representations or warranties of any kindwith respect to the information in this publication, and specifically disclaims implied warranties of merchantability or fitnessfor a particular purpose. Use, copying, and distribution of any EMC software described in this publication requires anapplicable software license.

For the most up-to-date listing of EMC product names, see EMC Corporation Trademarks on EMC.com. All other trademarksused herein are the property of their respective owners.© Copyright 2011 EMC Corporation. All rights reserved.

Revision History:November 2011: Release 6.7 SP1

Table of Contents

Chapter 1 Overview ..................................................................................................... 5Features of Advanced Document Transformation Services .................................. 5Capabilities of Advanced Document Transformation Services ............................. 7Supported transformations by source and target formats .................................... 8Documentum Advanced Document Transformation Servicesdocumentation ................................................................................................. 9Software download information ........................................................................ 9Troubleshooting and getting help ...................................................................... 10

Chapter 2 Compatibility and Feature Updates ............................................................. 11

Chapter 3 Environment and System Requirements ..................................................... 13

Chapter 4 Fixed Problems ........................................................................................... 15Fixed problems in Advanced Document Transformation Services 6.7 SP1 ............. 15Fixed problems in Advanced Document Transformation Services 6.7 ................... 17

Chapter 5 Known Problems and Limitations ............................................................... 19Known problems .............................................................................................. 19Additional information about known problems .............................................. 21Workaround for DTS-3587......................................................................... 21Workaround for DTS-3353......................................................................... 21Workaround for DTS-3540......................................................................... 22Workaround for MTS-2115 ........................................................................ 22

Limitations....................................................................................................... 23

Chapter 6 Installation ................................................................................................... 25

EMC Documentum Advanced Document Transformation Services Release Notes, Version 6.7 SP1 3

Table of Contents

List of Tables

Table 1. Advanced Document Transformation Services features ........................................... 5Table 2. Supported capabilities with Advanced Document Transformation

Services ........................................................................................................... 7Table 3. Supported transformations with Advanced Document Transformation

Services ........................................................................................................... 8

4 EMC Documentum Advanced Document Transformation Services Release Notes, Version 6.7 SP1

Chapter 1Overview

The Advanced Document Transformation Services Release Notes describes the features and capabilitiesof the product and gives detail on supported transformations and file formats. This document alsodescribes certifications for both hardware and software, information about fixed customer-reportedproblems, known problems, and limitations.

Advanced Document Transformation Services is server software that generates copies of documentsin Portable Document Format (PDF), PDF text, and HyperText Markup Language (HTML). You canuse Documentum client applications to request such a copy (called a rendition) of a document storedin a Documentum repository. The transformation capabilities of Advanced Document TransformationServices include PDF assembly, header/footer creation, security, textual watermarking, and contentoverlays.

Advanced Document Transformation Services can also provide PDF transformations from otherfile formats such as image and email formats.

Some Documentum client applications do not provide access to PDF and HTML renditions; consultthe documentation for the client you are using.

Features of Advanced DocumentTransformation ServicesThe following are the features that Advanced Document Transformation Services offers.

Table 1. Advanced Document Transformation Services features

Feature Comments

Runs as a Windows Service and intelligently handlesexceptions raised by native applications.

Transforms common document formats into PDF andHTML.

See Supported transformations by sourceand target formats, page 8

Creates automated transformations. Not available out of the box.Configuration required. See the ContentTransformation Services TransformationSuite Administration Guide.


Overview

Feature Comments

Transforms a document as part of a business workflowprocess using the CTS Activity Template.

CTS Activity Template is included.See the Content Transformation ServicesTransformation Suite Administration Guide.

Creates new renditions.

Creates PDF/A and PDF/X compliant files See the Content Transformation ServicesTransformation Suite Administration Guide.

Generates thumbnail, storyboard, and low-resolutionrenditions of some imported files.

Not available out of the box.Configuration required. See ContentTransformation Services TransformationSuite Administration Guide.

Compatible with entire Documentum product suite.

Creates new objects that are related to the originalobject.

Preserves bookmarks and hyperlinks in sourcedocuments.

Controls PDF job parameters such as page size, layout,and security.

Merges multiple files into a single PDF file.

Adds watermarks and overlays.

Creates headers and footers.

Auto-generates TOC from a merged PDF file.

Auto-generates page numbers.

Adds attachments to PDF.

Transforms image formats to PDF.

Transforms CAD drawings to PDF. Requires additional licensing*.

Transforms Microsoft Project files to PDF. Requires the installation of MicrosoftProject*.

Transforms Microsoft Visio files to PDF. Requires the installation of MicrosoftVisio*.

Transforms EMCMF to MSG See the Content Transformation ServicesTransformation Suite Administration Guide.

Transforms MSG to EMCMF See the Content Transformation ServicesTransformation Suite Administration Guide.

Transforms EMCMF to HTML and PDF See the Content Transformation ServicesTransformation Suite Administration Guide.

* These rendering applications must be purchased separately.


Overview

Capabilities of Advanced DocumentTransformation ServicesThe following table details the capabilities of Advanced Document Transformation Services.

Table 2. Supported capabilities with Advanced Document Transformation Services

Input format Createsthumbnail*

Createsstoryboard*

Createslow-resolutionrendition*

Writes XMPto content

Extracts XMPfrom content

BMP √ √

DOC, DOCX √ √ √ √

DOT, DOTX √ √ √ √

EML

HTML √ √ √

GIF √ √

JPEG √ √

MPP √ √ √

MSG √

ODB √ √ √

ODF √ √ √

ODG √ √ √

ODH √ √ √

ODP √ √ √

ODS √ √ √

ODT √ √ √

PDF √ √ √ √ √

PNG √ √

POT, POTX √ √ √ √

PPT, PPTX √ √ √ √

PS √ √ √

RTF √ √ √

TIFF √ √ √

TIFF (multi-page)

√ √ √

TXT √ √ √


Overview

Input format Createsthumbnail*

Createsstoryboard*

Createslow-resolutionrendition*

Writes XMPto content

Extracts XMPfrom content

VSD √ √ √

XHTML √ √

XLS, XLSX √ √ √ √

XLT, XLTX √ √ √ √

* Thumbnail, storyboard, and low-resolution renditions are not available out of the box. Someconfiguration is required. See the Content Transformation Services Transformation Suite AdministrationGuide for details.

Supported transformations by source andtarget formatsThe supported transformations are dependent upon the installation of various applications on theAdvanced Document Transformation Server, as detailed in .

With the required supporting applications installed, Advanced Document Transformation Servicescan perform the following transformations.

Table 3. Supported transformations with Advanced Document Transformation Services

Source formats (input) Target formats (output)

BMP PDF, PDF/A, PDF/X

DOC, DOCX, DOT, DOTX PDF, PDF/A, PDF/X , HTML

EML PDF, TXT

EMCMF (EMCMail) HTML, MSG, PDF

EPS PDF*

HTML PDF, PDF/A

GIF PDF

JPEG PDF, PDF/A, PDF/X

MPP PDF, PDF/A, PDF/X

MSG EMCMF, PDF, RTF, TXT

ODB, ODF, ODG, ODH, ODP, ODS, ODT PDF, PDF/A, PDF/X

PDF HTML, PDF, PDF/A

PNG PDF, PDF/X, PDF/A

PPT, PPTX, POT, POTX HTML, PDF, PDF/A, PDF/X

PS PDF *

RTF HTML, PDF


Overview

Source formats (input) Target formats (output)

TIFF (single and multi-page) PDF, PDF/A

TXT HTML, PDF

VSD PDF, PDF/A, PDF/X

XHTML PDF, PDF/X, PDF/A

XLS, XLSX, XLT, XLTX HTML, PDF, PDF/A, PDF/X

XLSM, CSV, XLTM, XLSB, DOTM, DOCM, POTM PDF

Note: All formats that support PDF also support PDFText

* Requires the installation of Ghostscript.

Documentum Advanced DocumentTransformation Services documentationThe following documents comprise the Advanced Document Transformation Services documentationset for this version of the product:

• EMC Documentum Advanced Document Transformation Services Release Notes, version 6.7 SP1 (thisdocument)

• Documentum Environment and System Requirements Guide, version 6.7 SP1

• EMC Documentum Content Transformation Services Transformation Suite Installation Guide, version 6.7

• EMC Documentum Content Transformation Services Transformation Suite Administration Guide,version 6.7

The Powerlink website (http://powerlink.EMC.com) contains the downloadable packages for specificproduct versions along with the release notes, installation guide, and other relevant documentationassociated with the product version. After logging in to Powerlink, click Support, and locate the linkfor the specific product technical documentation required.

Product documentation that is available online from the application (such as online help) does notappear as a separate item. It is automatically downloaded and installed with the software.

Software download informationThis product is available as an FTPdownload from the Powerlinkwebsite (http://powerlink.EMC.com).You should have received instructions through email regarding how to download products.

The Powerlink website (http://powerlink.EMC.com) provides access to https://EMC.subscribenet.com/control/dctm/index, which provides a complete listing of the products available for download.


http://powerlink.emc.com



https://emc.subscribenet.com/control/dctm/index

https://emc.subscribenet.com/control/dctm/index

Overview

Troubleshooting and getting helpTechnical support services for Documentum products are designed to make your deployment andmanagement of Documentum products as effective as possible. After logging in to Powerlink website(http://powerlink.EMC.com), click Support, and locate the link for EMC Customer Support Guide. TheEMC Customer Support Guide provides an explanation of Documentum support services and policies.



Chapter 2Compatibility and Feature Updates

This release of Advanced Document Transformation Services consists only of bug fixes; there areno changes


Compatibility and Feature Updates


Chapter 3Environment and SystemRequirements

The Documentum 6.7 SP1 Environment and System Requirements Guide contains the hardwarerequirements and software versions for your product supported with this release. The Documentum6.7 SP1 Environment and System Requirements Guide and product documentation are available on thePowerlink web site http://powerlink.EMC.com.



Environment and System Requirements


Chapter 4Fixed Problems

This section lists the known problems fixed in Advanced Document Transformation Services 6.7and 6.7 SP1.

Fixed problems in Advanced DocumentTransformation Services 6.7 SP1This section identifies problems that have been resolved, which were previously documented in therelease notes as a known problem or limitation.

The following table lists the defect numbers and a description of the problems fixed in AdvancedDocument Transformation Services 6.7 SP1:

Defect # Description of fixed problems

DTS–3762 Boxes over superscript hyperlinks overlap with each other.

DTS-3714 Bullet numbers are missing in the PDF file when there are bookmarks(hyperlinks).

DTS-3654 After applying the CTS 6.7 patch, the Documentum Administrator andCTS log files did not reflect the correct CTS product version. This issueis resolved.

DTS-3609 Letters in a hyperlinks displaying all capital letters.

DTS-3608 If in a hyperlink in a document the font is selected and the "all caps"(highlight the hyperlink select Format>Font, under effect) checkbox ischecked off, the rendered hyperlink appears in all caps.

DTS-3604 Hyperlinks break into two lines, and the partial link is not working.

DTS-3572 AdvancedPDF plugin removesCONVERTUSINGEXTENDEDCADSUPPORT attribute for newlyadded DGN format.


Fixed Problems

Defect # Description of fixed problems

DTS-3550 The BOM (byte order mark) in NLog.config under the%CTS%\Adlib\Process Manager process is corrupted and,therefore, does not work on the Japanese Windows 2008 Server operatingsystem. The right value sequence is 0xEF,0xBB,0xBF, but if your file has0x81, 0x45, 0xBF, the process does not work. You can work around this issueby removing 3 bytes or replacing those with the right sequence.

DTS-3487 PDF files with embedded drawings fail to render.

DTS-3467 Too many files with name cts_response_registerXXXX.xml occur in theC:\Documentum\Export folder on the CTS host, thus causing disk driveson ADTS and MTS hosts to be full.

DTS-3449 Characters after the hyperlink like periods, or brackets, are being includedin the hyperlink, which was not the case in other versions.

To work around this issue create the following registry key:

Key: HKEY_LOCAL_MACHINE\SOFTWARE\Adlibe\AdlibExpress\1.0.0\Native App Settings\Microsoft Word

Name: HyperlinkRemovePadding

Type: STRING

Value: 2.2

DTS-3405 When importing multipage PDFs it fails to create storyboard renditions.Single page PDF works fine

DTS-3401 In storyboard images some font types were getting garbled.

DTS-3235 ADTS renders ppt12 documents into a PDF with a white line through themiddle.

DTS-3037 Missing text in PDF renditions (ADTS 65 SP3 and ADTS 6.6).

DTS-3008 We fixed the issue where letters in a hyperlink appeared in all capital letters,even when the capitalization checkbox was unchecked.

DTS-2760 No thumbnails are created for GIF documents in ADTS 6.5 SP3.

DTS-1508 The destination of a PDF bookmark is rotated to 90 degrees counterclockwisein landscape pages if ADTS merges a PDF that was converted by Acrobatand contains both landscape and portrait pages.

DTS-1144 The issue whereMergePDF and CondensePDF profiles failed to generate anyPDF rendition when one of the inputs was unsupported has been resolved.


Fixed Problems

Fixed problems in Advanced DocumentTransformation Services 6.7This document does not contain any fixed problems that were previously documented as knownproblems or limitations. A list of fixed problems is available on http://powerlink.EMC.com.



Fixed Problems


Chapter 5Known Problems and Limitations

This chapter identifies problems and limitations that might affect your use of the product.

Known problemsThis section describes known problems in EMC Documentum software and documentation thatmight affect your use of the product.

The following table lists the known problems for Advanced Document Transformation Services6.7 SP1:

Defect # Description of known problems

AVTS-190 When a "Reset rendition” request is generated for a source file while thereis also a transformation request for a new rendition of the file, anotherrendition is created. That is, while a "dm_transcode_event” item is presentin the queue, and a user requests to reset the rendition of the source file(creating a dm_register_asset request), another dm_transcode_event getsgenerated in the queue, thereby creating two renditions for the sametransformation request. The server is attempting to reset the renditionrequest that is current in the queue when the reset rendition request occurs.

This occurs because the transformation request creates a dm_relation onthe object, and this relation normally gets deleted as the transformationis done (unless the ’save transformation’ option is selected). During theregister request, CTS checks to see if there is any relation on this object,and if there is, it creates a transformation request based on this relation.This is for recreating all the transformations that are ’saved’ for this object.In this specific case, the transformation request is still active, and so doesthe relation, while CTS performs the register request. So CTS creates anadditional transformation request.

This scenario seems to happen consistently when "importAndAddJob"scenario from CTSWebServices client is executed.


Known Problems and Limitations

Defect # Description of known problems

DTS-3587 After removal of CTS and DFC, some item do not ge removed from thesystem.

To perform a clean removal. see the workaround in Workaround forDTS-3587, page 21

DTS-3540 ADTS 6.7 install fails on nonsystem drives (for example, C:\) on Windows2008 64-bit host. Error received: executeAdlibInstallerEnvisionOCR200.exe2- DiPACTSExecuteProcess failed! - DiUtil: ExecuteProcess failed to execute:adexps.exe /start /ui_disable - The directory name is invalid.

See Workaround for DTS-3540, page 22.

DTS-3353 When a security password is entered when using the condense_Pdf profile,an error appears in the Adlib Express Process Log: "Error: PDF SecurityEnabled" and no PDF rendition is created.

See Workaround for DTS-3353, page 21.

MTS-2141 QueueProcessorContext Islands in CTServerService.xml are lost when twoproducts are configured to the same repository and one of them is laterreconfigured.

Workaround: Whenever a CTServerService.xml is modified, a backupis created before being modified. A backup file with a name like"CTSServerService.xml.bak.2” is created. Before reconfiguring a CTSproduct, you can revert to the last backed up file or you can back up theCTServerService.xml file.

MTS-2115 Office executable terminates unexpectedly. Submitting an MS Office file forreset rendition fails. Error in CTS log but nothing in Office application log.This issue occurs because during Office installation, the .NET programmingsupportability was not enabled (enabled by default).

See Workaround for MTS-2115, page 22.

MTS-187 Commented lines in configuration files for one CTS product are removedwhen another CTS product configuration programs is run on the same host.

For example, you have installed Media Transformation Services andthen commented out the pdfstoryboard MP in the CTSPluginService.xmlconfiguraiton file. If you then install another CTS product (such as ADTSor DTS), the line for the pdfstoryboard plugin is removed from theCTSPluginService.xml file.

MTS-45 The Start/Stop menu is not enabled or disabled according to the CTSinstance. When a particular CTS instance is running, the CTS admin agentdoes not do anything.


Additional information about known problems

This section includes supplemental information about known problems.

Workaround for DTS-3587

To perform a clean removal of your CTS product host, delete some things manually. Perform thefollowing manual steps:

1. Delete the CTS Admin Agent service using the command "sc delete CtsAdminAgent".

2. Delete the following registry entries (including all subentries):

a. HKEY_LOCAL_MACHINE\SOFTWARE\Apache Software Foundation\Procrun2.0\CtsAdminAgent

b. HKEY_LOCAL_MACHINE\SOFTWARE\Documentum\ContentDetectors

c. HKEY_LOCAL_MACHINE\SOFTWARE\Documentum\DFC Runtime Environment

3. Delete the folders C:\Program Files\Documentum and C:\Documentum (or thecorresponding locations where the product was installed on your system).


1. Check out condensePDF_adts.xml from /System/Media Server/Command Line Files.

2. Move the entire <JOB:PDFSETTINGS> and its child nodes to between <JOB:CONDENSE> and<JOB:TOC>:<JOB:CONDENSE ENABLED="Yes" /><JOB:PDFSETTINGS IMAGECOMPRESSION="Automatic" JPEGCOMPRESSIONLEVEL="9"MONOIMAGECOMPRESSION="CCITTGroup4"GRAYSCALE="No" PAGECOMPRESSION="Yes" DOWNSAMPLEIMAGES="Yes" RESOLUTION="doc_token_resolution" CONVERTUSINGNATIVEAPPLICATIONSUPPORT="Yes"CONVERTUSINGEXTENDEDFILETYPESUPPORT="Yes" PDFVERSION="doc_token_pdfVersion"CONVERTUSINGEXTENDEDCADSUPPORT="No"><JOB:FONTEMBEDDING ENABLED="Yes" LICENSEDFONTS="Yes" MULTILANGUAGEFONTS="Yes"PARTIALFONTS="Yes" STANDARDFONTS="Yes"/><JOB:OPTIMIZE ENABLED="doc_token_optimize"/><JOB:SECURITY ENABLED="doc_token_enableSecurity" ENCRYPTIONMODE="doc_token_encryptionMode" NOCHANGINGANNOTATION="Enabled"NOCHANGINGDOCUMENT="doc_token_changesAllowed" NOCONTENTACCESSIBILITY="doc_token_enableAccess"NODOCUMENTASSEMBLY="doc_token_docAssembly" NOFORMFIELDFILLIN="doc_token_formFieldFilling" NOHIGHQUALITYPRINTING="Enabled"NOPRINTING="doc_token_printing" NOSELECTIONCOPYINGCONTENT="doc_token_allowCopy"OPENPASSWORD="doc_token_secOpass"SECURITYPASSWORD="doc_token_secCpass"/></JOB:PDFSETTINGS><JOB:TOC ENABLED="No" DOCUMENTBOOKMARKS="Yes" DOCUMENTBOOKMARKTEXTMODE="DocumentFilename" CONTENTBOOKMARKS="Yes">

3. Check in condensePDF_adts.xml.



If you chose to install ADTS in a folder such as "Program Files\Documentum\CTS" on nonsystem(for example, C:\) drive, the ADTS configuration program is not installed. Therefore you cannot doanything except remove and reinstall under a different folder (not Program Files). Use the followingprocedure to remove before proceeding.

1. Reboot the computer as directed (if it is not rebooted already).

2. Stop Adlib Services (Adlib FMR, Adlib Process Manager, Adlib Exponent Connector, and AdlibExponent Manager).

3. Stop Adlib Express Server.

4. Remove "Documentum Content Transformation Services" using Control Pannel\Programs andFeatures.Select "No, I will restart my computer at a later time" on the final step and click "Finish".

5. Remove "Express Web Services" using Control Pannel\Programs and Features.Click "OK" for any errors.Open a cmd window and execute the following:sc delete "Exponent Connector Service"sc delete "Exponent Manager Service"

6. Remove "Adlib Express" from Control Pannel\Programs and Features.

a. Select "Yes" for keeping Express settings.

b. Select "Yes" for rehosting Express Licenses.

c. Select "Yes" for completely removing the selected application and all of its features.

d. Select "OK" for continuing with some errors.

e. Select "Yes, I want to restart my computer now" before finishing.

7. After system restarts, delete "Program Files\Documentum\CTS" and "Program Files(x86)\Documentum\CTS" folders.

8. Reinstall ADTS in another folder ("Program Files" folder on nonsystem drive does not work).

Workaround for MTS-2115

This issue occurs because during Office installation, the .NET programming supportability was notenabled. Follow this procedure to enable .NET programming post-installation.

1. Open Windows Add/Remove program.

2. SelectMicrosoft Office Enterprise 2007 > Change > Add or Remove feature > Continue.

3. Expand Office Shared features > Visual Basic Application.

4. Check that Visual Basic Application is installed. If this feature is not installed, select Run Frommy Computer option.



LimitationsThis section describes limits on the usability of current functionality. The limitations might be part ofthe product design or might result from issues with associated third-party products.

The following table lists the known limitations for Advanced Document Transformation Services 6.7:

Defect # Description of limitations

AVTS-589 We do not support installation of DFC and ADTS in different locations.

DTS-3823 If you want to enable performance/throughput logging, install theicmMetric.dar file. For information on how to download and install thisDAR file, see the EMC Documentum Content Transformation Product SuiteInstallation Guide.

DTS-3724 In 64-bit environments, CTS product uninstallers require 32-bit Java. Beforeinvoking the uninstaller, revert the changes done after installation to Javaon the CTS host as follows:

1. Stop all services that are using Java from C:\ProgramFiles\Documentum\Java.

2. Rename the 1.6.0_17 or 1.6.0.27 folder (whichever one is in use) toanother name (for example, 1.6.0_27_64bit).

3. Rename the 1.6.0_17_32 or 1.6.0.27_32 folder back to the original name,either 1.6.0_17 or 1.6.0_27.

DTS-3121 No support for OpenOffice formats in a localized OS (or a localizedOpenOffice application).

DTS-2717 Problems occur with Word documents that contain commenting. The"Use Balloons" option does not work when using only Office 2003 as therendering application.

DTS-1340 When converting to PDF/X, there is no preflight validation.

DTS-1320 Word Transformation to PDF with password and ’not allow printing’ and’not allow content copy or extraction’ still allows it to be printed and copycontent. The ’Security Open Password’ and ’Security Change Password’must be different during the document transformation to activate thesecurity properties.

This is a part of the PDF specification as designed by Adobe. After openingany PDF file, and attempting to set a same password for them will resultin error. To test:• Open any PDF file and select File > Properties > Security tab.

• Select "Require a password to open the document", and enter a password.

• Select "Restrict editing and printing of the document. A passwordis required to change these permission settings" and enter a differentpassword. If you try to enter a same password, the operation fails.



Defect # Description of limitations

DTS-1135 For any Excel sheet that does not contain any data, bookmarks are stillcreated in PDFs. For example, if an Excel Workbook contains three sheetswith data only in the first two sheets, it is expected that only two sheetsbe included in the PDF. Clicking on this third sheet in the PDF leads thepointer to the first page.

DTS-1113 If all files are not the same size and orientation, the condensePDF profiledoes not produce accurate results . Only the whitespaces should be removedbut in the PDF rendition, data from the files might be removed. ThecondensePDF profile can only remove the white space between pages of thesame size and orientation.

DTS-841 The default installation of ADTS on Windows sets a limitation on thememory usage of a third-party library.

To correct this issue, change the Registry Settings for: HKEY_LOCAL_MACHINE\SOFTWARE\Adlib\Adlib FMR\AdlibExpress\Default\AvailMemUsageLimit Setting this value to 0 corrects allissues.

DTS-510 ADTS is not capable of properly handling HTML files that have embeddedpictures that exceed 32kb, so HTML files with embedded pictures exceeding32kb cannot be transformed to PDF.

Only Mozilla Firefox can support this. Internet Explorer 8 supports stringsonly up to 32 kilobytes in length.


Chapter 6Installation

The instructions for installing and upgrading the product are provided in the Content TransformationServices Product Suite Installation Guide.

Ensure that your system meets the requirements listed in the Documentum 6.7 SP1 Environmentand System Requirements Guide before installing or upgrading the software. The Documentum 6.7SP1 Environment and System Requirements Guide and product documentation are available on thePowerlink website (http://powerlink.EMC.com).



documentum advanced document transformation services release notes 6.7 sp1

Documents

emc software

fixed problems

known problems

additional information

emc corporation trademarks

software download information

publication date

anapplicable software