documentation topsolid’cam - amazon s3...topsolid ® is a product name of missler software. the...
TRANSCRIPT
![Page 1: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/1.jpg)
Documentation
TopSolid’Cam
Tools functions in 7.8
![Page 2: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/2.jpg)
© 2013, Missler Software. 7, Rue du Bois Sauvage F-91055 Evry, FRANCE Web: http://www.topsolid.com E-mail: [email protected] All rights reserved. This information is subject to change without warning. No material may be reproduced or transmitted, regardless of the manner, electronic or mechanical means used or purpose, without formal written consent from Missler Software. TopSolid ® is a registered trademark of Missler Software. TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change without prior warning and should not be construed as a commitment by Missler Software. The software covered by this document is supplied under license, and may only be used and duplicated in compliance with the terms of this license. Rev.01
![Page 3: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/3.jpg)
Contents - SpottingDrill (Spotting Drill) ............................................................................................................................................ 7
- CenterDrill (Center Drill) ................................................................................................................................................. 8
- TwistDrill (Twist Drill) .................................................................................................................................................... 10
- FlatDrill (Flat Drill) ......................................................................................................................................................... 11
- GunDrill (Gun Drill) ........................................................................................................................................................ 12
- FaceMill (Face Mill) ....................................................................................................................................................... 13
- SideMill (Side Mill) ........................................................................................................................................................ 14
- SlotMill (Slot Mill) ......................................................................................................................................................... 15
- TSlotMill (T Slot Mill) ..................................................................................................................................................... 16
- RadiusedMill (Radiused Mill) ........................................................................................................................................ 17
- BallNoseMill (Ball Nose Mill) ......................................................................................................................................... 18
- LollipopMill (Lollipop Mill) ............................................................................................................................................ 19
- ConicNoseMill (Conic Nose Mill) ................................................................................................................................... 20
- ConicNoseBallMill (Conic Nose Ball Mill) ...................................................................................................................... 21
- SpotFaceMill (Spot Face Mill) ....................................................................................................................................... 22
- BackSpotFaceMill (Back Spot Face Mill) ....................................................................................................................... 23
- CounterboringMill (Counterboring Mill) ....................................................................................................................... 24
- CornerRoundingMill (Corner Rounding Mill) ................................................................................................................ 25
- ChamferMill (Chamfer Mill) .......................................................................................................................................... 26
- ReverseChamferMill (Reverse Chamfer Mill) ............................................................................................................... 27
- DoubleChamferMill (Double Chamfer Mill) .................................................................................................................. 28
- DiscMill (Disc Mill) ......................................................................................................................................................... 29
- RadiusedStaggeredTeethMill (Radiused Staggered Teeth Mill) ................................................................................... 30
- SpecialMill (Special Mill) ............................................................................................................................................... 31
- ConstantReamer (Constant Reamer) ............................................................................................................................ 32
- BoringBar (Boring Bar) .................................................................................................................................................. 33
- Tap (Tap) ....................................................................................................................................................................... 34
- ExternalThreadMill (External Thread Mill).................................................................................................................... 35
- InternalThreadMill (Internal Thread Mill) ..................................................................................................................... 36
- ExternalTurn (External Turn) ........................................................................................................................................ 37
- InternalTurn (Internal Turn) .......................................................................................................................................... 39
- ExternalGroove (ExternalGroove) ................................................................................................................................. 41
- InternalGroove (Internal Groove) ................................................................................................................................. 42
![Page 4: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/4.jpg)
- FrontalGroove (Frontal Groove) ................................................................................................................................... 44
- ExternalThread (External Thread) ................................................................................................................................. 45
- InternalThread (Internal Thread) .................................................................................................................................. 46
- BallTouch (Ball Touch) .................................................................................................................................................. 47
- ClampGroove (Clamp Groove) ...................................................................................................................................... 48
- ClampThread (Clamp Thread) ....................................................................................................................................... 49
- ClampInsert (Clamp Insert) ........................................................................................................................................... 50
- ToolingHolder (Tooling Holder) .................................................................................................................................... 51
- ToolingShank (Tooling Shank) ....................................................................................................................................... 52
- ClampingInsert (Clamping Insert) ................................................................................................................................. 55
- CylindricalToolingShank (Cylindrical Tooling Shank) .................................................................................................... 56
- CylindricalToolingHolder (Cylindrical Tooling Holder) .................................................................................................. 57
- SquareToolingShank (Square Tooling Shank) ............................................................................................................... 58
- SquareToolingHolder (Square Tooling Holder) ............................................................................................................. 59
- ToolOffset (Tool Offset) ................................................................................................................................................ 60
- CollisionAnalysisRevolutionShape (Collision Analysis Revolution Shape) .................................................................... 61
- CollisionAnalysisShape (Collision Analysis Shape) ........................................................................................................ 62
- Tag (Tag) ........................................................................................................................................................................ 63
- CuttingShape (Cutting Shape) ....................................................................................................................................... 64
- CuttingRevolutionShape (Cutting Revolution Shape) ................................................................................................... 65
ClampingSystemFrame ................................................................................................................................................... 66
ClampingSystemName .................................................................................................................................................... 67
ClampingSystemSize ....................................................................................................................................................... 68
ClampingSystemType ...................................................................................................................................................... 69
ClearanceAngle ............................................................................................................................................................... 70
CoolantNozzle ................................................................................................................................................................. 71
CornerRadius ................................................................................................................................................................... 72
CornerRadius1 ................................................................................................................................................................. 73
CornerRadius2 ................................................................................................................................................................. 74
CuttingAngle.................................................................................................................................................................... 75
CuttingBottomDiameter ................................................................................................................................................. 76
CuttingDiameter .............................................................................................................................................................. 77
CuttingEdgeDepth ........................................................................................................................................................... 78
CuttingEdgeOrigin ........................................................................................................................................................... 79
![Page 5: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/5.jpg)
CuttingEdgeShape ........................................................................................................................................................... 80
CuttingEdgeSize............................................................................................................................................................... 81
CuttingEdgeWidth ........................................................................................................................................................... 82
CuttingLength .................................................................................................................................................................. 83
CuttingTopDiameter ....................................................................................................................................................... 84
CuttingWidth ................................................................................................................................................................... 85
DepthDrilling ................................................................................................................................................................... 86
DepthReaming ................................................................................................................................................................ 87
- DepthTapping ............................................................................................................................................................... 88
- DepthThreading ............................................................................................................................................................ 89
- EntryDiameter ............................................................................................................................................................... 90
FluteLength ..................................................................................................................................................................... 91
GrooveExternalDiameter ................................................................................................................................................ 92
GrooveInternalDiameter ................................................................................................................................................. 93
HandOfTool ..................................................................................................................................................................... 94
- InitialDistance ............................................................................................................................................................... 95
- InsertThickness ............................................................................................................................................................. 96
LeftHand .......................................................................................................................................................................... 97
- MaximalDistance .......................................................................................................................................................... 98
MaximumRampAngle...................................................................................................................................................... 99
- MinimalDistance ......................................................................................................................................................... 100
- NominalDiameter........................................................................................................................................................ 101
- Norm ........................................................................................................................................................................... 102
- NumberOfThreadTeeth .............................................................................................................................................. 103
- NumberOfToolTeeth ................................................................................................................................................... 104
- Offset2d ...................................................................................................................................................................... 105
- Offset3d ...................................................................................................................................................................... 106
- OffsetDescription ........................................................................................................................................................ 107
- OverLength ................................................................................................................................................................. 108
- Pitch ............................................................................................................................................................................ 109
- PlaneCompensation .................................................................................................................................................... 110
- PlungeDirection .......................................................................................................................................................... 111
- PointCompensation .................................................................................................................................................... 114
- RespectDirection ......................................................................................................................................................... 115
![Page 6: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/6.jpg)
Revolute Section ........................................................................................................................................................... 118
Revolution Section ........................................................................................................................................................ 119
RevolutionProfile .......................................................................................................................................................... 120
ShankDiameter .............................................................................................................................................................. 121
ShankHeight .................................................................................................................................................................. 122
ShankMaximalDiameter ................................................................................................................................................ 123
ShankMinimalDiameter ................................................................................................................................................ 124
ShankWidth ................................................................................................................................................................... 125
Shape ............................................................................................................................................................................. 126
Tag ................................................................................................................................................................................. 127
ThreadProfile ................................................................................................................................................................ 128
TipAngle ........................................................................................................................................................................ 129
ToolingSystemFrame..................................................................................................................................................... 130
ToolingSystemFrameLeft .............................................................................................................................................. 131
ToolingSystemFrameRight ............................................................................................................................................ 132
ToolingSystemName ..................................................................................................................................................... 133
ToolingSystemSize......................................................................................................................................................... 134
ToolingSystemType ....................................................................................................................................................... 135
Cutting Tool Material Category ..................................................................................................................................... 136
Tool example 1 : Multi-Diameter Drill solution 1 ......................................................................................................... 137
Tool example 1 : Multi-Diameter Drill solution 2 ......................................................................................................... 140
Tool example 2 : Multi-Diameter Drill .......................................................................................................................... 143
![Page 7: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/7.jpg)
- SpottingDrill (Spotting Drill) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] CoolantNozzle (Coolant Nozzle) NumberOfToolTeeth (Number Of Tool Teeth) LeftHand (Left-Hand) FluteLength (Flute Length) = [L] TipAngle (Tip Angle) = [C] CuttingDiameter (Cutting Diameter) = [B]
Version 7.8.102.000
For this tool, you need to define 2 Tool Offset Tool offset (1) :
Offset 3D = 0 Offset 2D = 0 Tool offset (2) :
Offset 3D = 0 Offset 2D = [B] / 2
![Page 8: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/8.jpg)
- CenterDrill (Center Drill) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] CoolantNozzle (Coolant Nozzle) NumberOfToolTeeth (Number Of Tool Teeth) LeftHand (Left-Hand) FluteLength (Flute Length) = [U] TipAngle (Tip Angle) = [A] DepthDrilling (Depth Drilling) = [I2] CuttingBottomDiameter (Cutting Bottom Diameter) = [d2]
CuttingTopDiameter (Cutting Top Diameter) = [D]
Version 7.8.102.000
For this tool, you need to define 4 Tool Offset Tool offset (1) :
Offset 3D = 0 Offset 2D = 0 Tool offset (2) :
Offset 3D = 0 Offset 2D = [d2] / 2 Tool offset (3) :
Offset 3D = 0 Offset 2D = [d2] / 2 Tool offset (4) :
![Page 9: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/9.jpg)
Offset 3D = 0 Offset 2D = [D] / 2
![Page 10: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/10.jpg)
- TwistDrill (Twist Drill) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] CoolantNozzle (Coolant Nozzle) NumberOfToolTeeth (Number Of Tool Teeth) LeftHand (Left-Hand) FluteLength (Flute Length) = [E] OverLength (Over Length) = [F] TipAngle (Tip Angle) = [D] DepthDrilling (Depth Drilling) = [C] CuttingDiameter (Cutting Diameter) = [B]
Version 7.6.301.084
For this tool, you need to define 2 Tool Offset Tool offset (1) :
Offset 3D = 0 Offset 2D = 0 Tool offset (2) :
Offset 3D = 0 Offset 2D = [B] / 2
![Page 11: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/11.jpg)
- FlatDrill (Flat Drill) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] CoolantNozzle (Coolant Nozzle) NumberOfToolTeeth (Number Of Tool Teeth) LeftHand (Left-Hand) FluteLength (Flute Length) = [E] OverLength (Over Length) = [F] DepthDrilling (Depth Drilling) = [C] CuttingDiameter (Cutting Diameter) = [B]
Version 7.6.301.084
For this tool, you need to define 1 Tool Offset
Offset 3D = 0 Offset 2D = CuttingDiameter / 2 = [B] / 2
![Page 12: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/12.jpg)
- GunDrill (Gun Drill) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] CoolantNozzle (Coolant Nozzle) NumberOfToolTeeth (Number Of Tool Teeth) LeftHand (Left-Hand) FluteLength (Flute Length) ) = [E] OverLength (Over Length) ) = [F] TipAngle (Tip Angle) = [D] DepthDrilling (Depth Drilling) = [C] CuttingDiameter (Cutting Diameter) = [B]
Version 7.8.102.000
For this tool, you need to define 2 Tool Offset Tool offset (1) :
Offset 3D = 0 Offset 2D = 0 Tool offset (2) :
Offset 3D = 0 Offset 2D = [B] / 2
![Page 13: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/13.jpg)
- FaceMill (Face Mill) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] MaximumRampAngle (Maximum Ramp Angle) CoolantNozzle (Coolant Nozzle) NumberOfToolTeeth (Number Of Tool Teeth) LeftHand (Left-Hand) CornerRadius (Corner Radius) = [D] CuttingAngle (Cutting Angle) = [E] CuttingLength (Cutting Length) = [C] CuttingDiameter (Cutting Diameter) = [B] Version 7.6.301.084 Rules :
- If the tool use a round insert (R) , we have : CuttingAngle (Cutting Angle) = [E] = 0 and CornerRadius (Corner Radius) = [D] = value of the radius
- If the insert is not a round insert , the variable CornerRadius (Corner Radius) = [D] = 0 In this case we don’t use the corner radius for calculation, so set is at 0.
For this tool, you need to define 1 Tool Offset
If [D] = 0 , then Offset 3D = 0 If [D] <> 0 , then Offset 3D = [D] Offset 2D = [B] / 2
![Page 14: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/14.jpg)
- SideMill (Side Mill) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] MaximumRampAngle (Maximum Ramp Angle) CoolantNozzle (Coolant Nozzle) NumberOfToolTeeth (Number Of Tool Teeth) LeftHand (Left-Hand) CuttingLength (Cutting Length) = [C] CuttingDiameter (Cutting Diameter) = [B]
Version 7.6.301.084
For this tool, you need to define 1 Tool Offset
Offset 3D = 0 Offset 2D = [B] / 2
![Page 15: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/15.jpg)
- SlotMill (Slot Mill) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] MaximumRampAngle (Maximum Ramp Angle) CoolantNozzle (Coolant Nozzle) NumberOfToolTeeth (Number Of Tool Teeth) LeftHand (Left-Hand) CuttingLength (Cutting Length) = [C] CuttingDiameter (Cutting Diameter) = [B] Version 7.6.301.084 For this tool, you need to define 1 Tool Offset
Offset 3D = 0 Offset 2D = [B] / 2
![Page 16: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/16.jpg)
- TSlotMill (T Slot Mill) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] MaximumRampAngle (Maximum Ramp Angle) CoolantNozzle (Coolant Nozzle) NumberOfToolTeeth (Number Of Tool Teeth) LeftHand (Left-Hand) CuttingWidth (Cutting Width) = [D] CuttingLength (Cutting Length) = [C] CuttingDiameter (Cutting Diameter) = [B]
Version 7.6.301.084
For this tool, you need to define 2 Tool Offset : Tool offset (1) :
Offset 3D = 0 Offset 2D = [B] / 2 Tool offset (2) :
Offset 3D = 0 Offset 2D = [B] / 2
![Page 17: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/17.jpg)
- RadiusedMill (Radiused Mill) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] MaximumRampAngle (Maximum Ramp Angle) CoolantNozzle (Coolant Nozzle) NumberOfToolTeeth (Number Of Tool Teeth) LeftHand (Left-Hand) CornerRadius (Corner Radius) = [D] CuttingLength (Cutting Length) = [C] CuttingDiameter (Cutting Diameter) = [B] Version 7.6.301.084
For this tool, you need to define 2 Tool Offset : Tool offset (1) :
Offset 3D = [D] Offset 2D = [B] / 2 Tool offset (2) :
Offset 3D = [D] Offset 2D = [B] / 2
![Page 18: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/18.jpg)
- BallNoseMill (Ball Nose Mill) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] MaximumRampAngle (Maximum Ramp Angle) CoolantNozzle (Coolant Nozzle) NumberOfToolTeeth (Number Of Tool Teeth) LeftHand (Left-Hand) CuttingLength (Cutting Length) = [C] CuttingDiameter (Cutting Diameter) = [B] Version 7.6.301.084
For this tool, you need to define 2 Tool Offset : Tool offset (1) :
Offset 3D = [B] / 2 Offset 2D = [B] / 2 Tool offset (2) :
Offset 3D = [B] / 2 Offset 2D = [B] / 2
![Page 19: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/19.jpg)
- LollipopMill (Lollipop Mill) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] MaximumRampAngle (Maximum Ramp Angle) CoolantNozzle (Coolant Nozzle) NumberOfToolTeeth (Number Of Tool Teeth) LeftHand (Left-Hand) CuttingLength (Cutting Length) = [L] CuttingDiameter (Cutting Diameter) = [D]
Version 7.8.102.000
For this tool, you need to define 2 Tool Offset : Tool offset (1) :
Offset 3D = [D] / 2 Offset 2D = [D] / 2 Tool offset (2) :
Offset 3D = [D] / 2 Offset 2D = [D] / 2
![Page 20: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/20.jpg)
- ConicNoseMill (Conic Nose Mill) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] MaximumRampAngle (Maximum Ramp Angle) CoolantNozzle (Coolant Nozzle) NumberOfToolTeeth (Number Of Tool Teeth) LeftHand (Left-Hand) CuttingLength (Cutting Length) = [C] ClearanceAngle (Clearance Angle) = [E] CuttingTopDiameter (Cutting Top Diameter) = [D] CuttingBottomDiameter (Cutting Bottom Diameter) = [B] Version 7.6.301.084
For this tool, you need to define 2 Tool Offset : Tool offset (1) :
Offset 3D = 0 Offset 2D = [B] / 2 Tool offset (2) :
Offset 3D = 0 Offset 2D = [D] / 2
![Page 21: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/21.jpg)
- ConicNoseBallMill (Conic Nose Ball Mill) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] MaximumRampAngle (Maximum Ramp Angle) CoolantNozzle (Coolant Nozzle) NumberOfToolTeeth (Number Of Tool Teeth) LeftHand (Left-Hand) CuttingLength (Cutting Length) = [C] ClearanceAngle (Clearance Angle) = [E] CuttingTopDiameter (Cutting Top Diameter) = [D] CuttingBottomDiameter (Cutting Bottom Diameter) = [B] CornerRadius (Corner Radius) = [F] Version 7.6.301.084
For this tool, you need to define 3 Tool Offset : Tool offset (1) :
Offset 3D = [F] Offset 2D = [B] / 2 Tool offset (2) :
Offset 3D = [F] Offset 2D = [B] / 2 This point is at Y=[F] Tool offset (3) :
Offset 3D = 0 Offset 2D = [D] / 2
![Page 22: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/22.jpg)
- SpotFaceMill (Spot Face Mill) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] MaximumRampAngle (Maximum Ramp Angle) CoolantNozzle (Coolant Nozzle) NumberOfToolTeeth (Number Of Tool Teeth) LeftHand (Left-Hand) OverLength (Over Length) = [D] CuttingLength (Cutting Length) = [C] CuttingDiameter (Cutting Diameter) = [B]
Version 7.6.301.084
For this tool, you need to define 1 Tool Offset
Offset 3D = 0 Offset 2D = [B] / 2
![Page 23: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/23.jpg)
- BackSpotFaceMill (Back Spot Face Mill) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] MaximumRampAngle (Maximum Ramp Angle) CoolantNozzle (Coolant Nozzle) NumberOfToolTeeth (Number Of Tool Teeth) LeftHand (Left-Hand) OverLength (Over Length) = [D] CuttingLength (Cutting Length) = [C] CuttingDiameter (Cutting Diameter) = [B]
Version 7.6.301.084
For this tool, you need to define 2 Tool Offset : Tool offset (1) :
Offset 3D = 0 Offset 2D = [B] / 2 Tool offset (2) :
Offset 3D = 0 Offset 2D = [B] / 2
![Page 24: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/24.jpg)
- CounterboringMill (Counterboring Mill) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] MaximumRampAngle (Maximum Ramp Angle) CoolantNozzle (Coolant Nozzle) NumberOfToolTeeth (Number Of Tool Teeth) LeftHand (Left-Hand) CuttingLength (Cutting Length) = [C] CuttingDiameter (Cutting Diameter) = [B] Version 7.8.102.000
For this tool, you need to define 2 Tool Offset : Tool offset (1) :
Offset 3D = 0 Offset 2D = [B] / 2 Tool offset (2) :
Offset 3D = 0 Offset 2D = [B] / 2
![Page 25: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/25.jpg)
- CornerRoundingMill (Corner Rounding Mill) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] MaximumRampAngle (Maximum Ramp Angle) CoolantNozzle (Coolant Nozzle) NumberOfToolTeeth (Number Of Tool Teeth) LeftHand (Left-Hand) CornerRadius (Corner Radius) = [D] CuttingLength (Cutting Length) = [C] CuttingDiameter (Cutting Diameter) = [B] Version 7.6.301.084
For this tool, you need to define 2 Tool Offset : Tool offset (1) :
Offset 3D = 0 Offset 2D = ([B] / 2) - [D] Tool offset (2) :
Offset 3D = 0 Offset 2D = [B] / 2
![Page 26: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/26.jpg)
- ChamferMill (Chamfer Mill) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] MaximumRampAngle (Maximum Ramp Angle) CoolantNozzle (Coolant Nozzle) NumberOfToolTeeth (Number Of Tool Teeth) LeftHand (Left-Hand) CuttingLength (Cutting Length) = [C] CuttingAngle (Cutting Angle) = [E] CuttingTopDiameter (Cutting Top Diameter) = [D] CuttingBottomDiameter (Cutting Bottom Diameter) = [B]
Version 7.6.301.084 For this tool, you need to define 2 Tool Offset : Tool offset (1) :
Offset 3D = 0 Offset 2D = [B] / 2 Tool offset (2) :
Offset 3D = 0 Offset 2D = [D] / 2
![Page 27: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/27.jpg)
- ReverseChamferMill (Reverse Chamfer Mill) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] MaximumRampAngle (Maximum Ramp Angle) CoolantNozzle (Coolant Nozzle) NumberOfToolTeeth (Number Of Tool Teeth) LeftHand (Left-Hand) CuttingLength (Cutting Length) = [C] CuttingAngle (Cutting Angle) = [E] CuttingTopDiameter (Cutting Top Diameter) = [D] CuttingBottomDiameter (Cutting Bottom Diameter) = [B]
Version 7.6.301.084
For this tool, you need to define 2 Tool Offset : Tool offset (1) :
Offset 3D = 0 Offset 2D = [B] / 2 Tool offset (2) :
Offset 3D = 0 Offset 2D = [D] / 2
![Page 28: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/28.jpg)
- DoubleChamferMill (Double Chamfer Mill) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] MaximumRampAngle (Maximum Ramp Angle) CoolantNozzle (Coolant Nozzle) NumberOfToolTeeth (Number Of Tool Teeth) LeftHand (Left-Hand) CuttingLength (Cutting Length) = [C] CuttingAngle (Cutting Angle) = [E] CuttingTopDiameter (Cutting Top Diameter) = [D] CuttingBottomDiameter (Cutting Bottom Diameter) = [B]
Version 7.6.301.084
For this tool, you need to define 4 Tool Offset : Tool offset (1) :
Offset 3D = 0 Offset 2D = [B] / 2 Tool offset (2) :
Offset 3D = 0 Offset 2D = [D] / 2 Tool offset (3) :
Offset 3D = 0 Offset 2D = [D] / 2 Tool offset (4) :
Offset 3D = 0 Offset 2D = [B] / 2
![Page 29: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/29.jpg)
- DiscMill (Disc Mill) CuttingEdgeOrigin (Cutting Edge Origin) ) = frame [A] MaximumRampAngle (Maximum Ramp Angle) CoolantNozzle (Coolant Nozzle) NumberOfToolTeeth (Number Of Tool Teeth) LeftHand (Left-Hand) CuttingWidth (Cutting Width) = [D] CuttingLength (Cutting Length) = [C] CuttingDiameter (Cutting Diameter) = [B] Version 7.8.102.000
For this tool, you need to define 2 Tool Offset : Tool offset (1) :
Offset 3D = 0 Offset 2D = [B] / 2 Tool offset (2) :
Offset 3D = 0 Offset 2D = [B] / 2
![Page 30: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/30.jpg)
- RadiusedStaggeredTeethMill (Radiused Staggered Teeth Mill) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] MaximumRampAngle (Maximum Ramp Angle) CoolantNozzle (Coolant Nozzle) NumberOfToolTeeth (Number Of Tool Teeth) LeftHand (Left-Hand) CornerRadiusTop (Corner Radius Top) = [E] CornerRadiusBottom (Corner Radius Bottom) = [F] CuttingWidth (Cutting Width) = [D] CuttingLength (Cutting Length) = [C] CuttingDiameter (Cutting Diameter) = [B]
Version 7.8.102.000
For this tool, you need to define 4 Tool Offset : Tool offset (1) :
Offset 3D = [F] Offset 2D = [B] / 2 Tool offset (2) :
Offset 3D = [F] Offset 2D = [B] / 2 Tool offset (3) :
Offset 3D = [E] Offset 2D = [B] / 2 Tool offset (4) :
Offset 3D = [E] Offset 2D = [B] / 2
![Page 31: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/31.jpg)
- SpecialMill (Special Mill) CuttingEdgeOrigin (Cutting Edge Origin) MaximumRampAngle (Maximum Ramp Angle) CoolantNozzle (Coolant Nozzle) NumberOfToolTeeth (Number Of Tool Teeth) LeftHand (Left-Hand) RevolutionProfile (Revolution Profile) Version 7.6.301.084
For this tool, you need to define 1 Tool Offset
Offset 3D = yy Offset 2D = xx
![Page 32: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/32.jpg)
- ConstantReamer (Constant Reamer) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] MaximumRampAngle (Maximum Ramp Angle) CoolantNozzle (Coolant Nozzle) NumberOfToolTeeth (Number Of Tool Teeth) LeftHand (Left-Hand) OverLength (Over Length) FluteLength (Flute Length) = [D] DepthReaming (Depth Reaming) = [C] CuttingDiameter (Cutting Diameter) = [B]
Version 7.6.301.084
For this tool, you need to define 1 Tool Offset
Offset 3D = 0 Offset 2D = [B] / 2
![Page 33: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/33.jpg)
- BoringBar (Boring Bar) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] MaximumRampAngle (Maximum Ramp Angle) CoolantNozzle (Coolant Nozzle) NumberOfToolTeeth (Number Of Tool Teeth) LeftHand (Left-Hand) OverLength (Over Length) FluteLength (Flute Length) ) = [D] DepthReaming (Depth Reaming) = [C] CuttingDiameter (Cutting Diameter) = [B]
Version 7.6.301.084
For this tool, you need to define 1 Tool Offset
Offset 3D = 0 Offset 2D = [B] / 2
![Page 34: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/34.jpg)
- Tap (Tap) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] CoolantNozzle (Coolant Nozzle) LeftHand (Left-Hand) NominalDiameter (Nominal Diameter) = [B] OverLength (Over Length) FluteLength (Flute Length) = [E] DepthTapping (Depth Tapping) = [C] Norm (Norm) Pitch (Pitch) = [D] Version 7.6.301.084
For this tool, you need to define 1 Tool Offset
Offset 3D = 0 Offset 2D = [B] / 2
![Page 35: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/35.jpg)
- ExternalThreadMill (External Thread Mill) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] CoolantNozzle (Coolant Nozzle) NumberOfToolTeeth (Number Of Tool Teeth) LeftHand (Left-Hand) NumberOfThreadTeeth (Number Of Thread Teeth) DepthThreading (Depth Threading) = [C] CuttingDiameter (Cutting Diameter) = [B] Pitch (Pitch) = [D] ThreadProfile (Thread Profile) Version 7.6.301.084
For this tool, you need to define 1 Tool Offset
Offset 3D = 0 Offset 2D = [B] / 2
![Page 36: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/36.jpg)
- InternalThreadMill (Internal Thread Mill) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] CoolantNozzle (Coolant Nozzle) NumberOfToolTeeth (Number Of Tool Teeth) LeftHand (Left-Hand) NumberOfThreadTeeth (Number Of Thread Teeth) DepthThreading (Depth Threading) = [C] CuttingDiameter (Cutting Diameter) = [B] Pitch (Pitch) = [D] ThreadProfile (Thread Profile) Version 7.6.301.084
For this tool, you need to define 1 Tool Offset
Offset 3D = 0 Offset 2D = [B] / 2
![Page 37: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/37.jpg)
- ExternalTurn (External Turn) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] CoolantNozzle (Coolant Nozzle) ClearanceAngle (Clearance Angle (Alpha)) = [E] InsertThickness (Insert Thickness) = [C] EntryDiameter (Entry Diameter) = [F] CuttingEdgeSize (Cutting Edge Size) = [B] CuttingEdgeShape (Cutting Edge Shape(A,B,C..X)) HandOfTool (Hand Of Tool (R/L/N)) CornerRadius (Corner Radius) = [D]
Version 7.6.301.084
A) If the tool can manage only 1 radius, you need to define 1 Tool Offset
Offset 3D = 0 Offset 2D = [D] For a Left turn tool, Offset Description = Left For a Right turn tool, Offset Description = Right For a Neutral turn tool, Offset Description = Neutral
LEFT
and Neutral RIGHT
![Page 38: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/38.jpg)
B) If the tool can manage 2 radius, you need to define 2 Tool Offset
In this case, the CuttingEdgeOrigin ( frame [A] ) is on the tool offset (1). Tool offset (1) : For a Left turn tool, Offset Description = Left For a Right turn tool, Offset Description = Right Offset 3D = 0 Offset 2D = [D] Tool offset (2) : Offset Description = Top Offset 3D = 0 Offset 2D = [D]
LEFT RIGHT
![Page 39: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/39.jpg)
- InternalTurn (Internal Turn) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] CoolantNozzle (Coolant Nozzle) ClearanceAngle (Clearance Angle (Alpha)) = [E] InsertThickness (Insert Thickness) = [C] EntryDiameter (Entry Diameter) = [F] CuttingEdgeSize (Cutting Edge Size) = [B] CuttingEdgeShape (Cutting Edge Shape(A,B,C..X)) HandOfTool (Hand Of Tool (R/L/N)) CornerRadius (Corner Radius) = [D]
LEFT Right And NEUTRAL
Version 7.6.301.084
A) If the tool can manage only 1 radius, you need to define 1 Tool Offset For a Left turn tool, Offset Description = Left For a Right turn tool, Offset Description = Right For a Neutral turn tool, Offset Description = Neutral Offset 3D = 0 Offset 2D = [D]
C) If the tool can manage 2 radius, you need to define 2 Tool Offset In this case, the CuttingEdgeOrigin ( frame [A] ) is on the tool offset (1).
Tool offset (1) : For a Left turn tool, Offset Description = Left For a Right turn tool, Offset Description = Right Offset 3D = 0
![Page 40: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/40.jpg)
Offset 2D = [D] Tool offset (2) : Offset Description = Top Offset 3D = 0 Offset 2D = [D]
LEFT RIGHT
![Page 41: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/41.jpg)
- ExternalGroove (ExternalGroove) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] CoolantNozzle (Coolant Nozzle) ClearanceAngle (Clearance Angle) = [E] InsertThickness (Insert Thickness) = [C] EntryDiameter (Entry Diameter) = [F] CuttingEdgeSize (Cutting Edge Size) CuttingEdgeShape (Cutting Edge Shape) HandOfTool (Hand Of Tool (R/L/N)) CuttingEdgeDepth (Cutting Edge Depth) = [D] CuttingEdgeWidth (Cutting Edge Width) = [B] CornerRadius2 (Corner Radius Right) = [H] CornerRadius1 (Corner Radius Left) = [G]
LEFT RIGHT Insert R = NEUTRAL
And NEUTRAL
Version 7.6.301.084 For this tool, you need to define 2 Tool Offset : Tool offset (1) :
Offset 3D = 0 Offset 2D = [G] Tool offset (2) :
Offset 3D = 0 Offset 2D = [H]
![Page 42: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/42.jpg)
- InternalGroove (Internal Groove) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] CoolantNozzle (Coolant Nozzle) ClearanceAngle (Clearance Angle) ) = [E] InsertThickness (Insert Thickness) = [C] EntryDiameter (Entry Diameter) = [F] CornerRadius2 (Corner Radius Right) = [H] CornerRadius1 (Corner Radius Left) = [G] CuttingEdgeSize (Cutting Edge Size) CuttingEdgeShape (Cutting Edge Shape ) HandOfTool (Hand Of Tool (R/L/N)) CuttingEdgeDepth (Cutting Edge Depth) = [D] CuttingEdgeWidth (Cutting Edge Width) = [B]
LEFT RIGHT
Left Insert R Right Insert R
Version 7.6.301.084
For this tool, you need to define 2 Tool Offset : Tool offset (1) :
Offset 3D = 0 Offset 2D = [G]
![Page 43: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/43.jpg)
Tool offset (2) :
Offset 3D = 0 Offset 2D = [H]
![Page 44: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/44.jpg)
- FrontalGroove (Frontal Groove) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] CoolantNozzle (Coolant Nozzle) ClearanceAngle (Clearance Angle) = [E] InsertThickness (Insert Thickness) = [C] GrooveExternalDiameter (Groove External Diameter) GrooveInternalDiameter (Groove Internal Diameter) CuttingEdgeSize (Cutting Edge Size) CuttingEdgeShape (Cutting Edge Shape) HandOfTool (Hand Of Tool (R/L/N)) CuttingEdgeDepth (Cutting Edge Depth) = [D] CuttingEdgeWidth (Cutting Edge Width) = [B] CornerRadius2 (Corner Radius Right) = [H] CornerRadius1 (Corner Radius Left) = [G]
LEFT RIGHT Insert R = NEUTRAL
And NEUTRAL
Version 7.6.301.084
For this tool, you need to define 2 Tool Offset : Tool offset (1) :
Offset 3D = 0 Offset 2D = [G] Tool offset (2) :
Offset 3D = 0 Offset 2D = [H]
![Page 45: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/45.jpg)
- ExternalThread (External Thread) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] CoolantNozzle (Coolant Nozzle) ClearanceAngle (Clearance Angle (Alpha)) = [E] InsertThickness (Insert Thickness) = [C] EntryDiameter (Entry Diameter) = [F] CuttingEdgeSize (Cutting Edge Size) CuttingEdgeShape (Cutting Edge Shape(A,B,C..X)) HandOfTool (Hand Of Tool (R/L/N)) Pitch (Pitch) ThreadProfile (Thread Profile)
LEFT RIGHT
Version 7.6.301.084
For this tool, you need to define 1 Tool Offset For a Left Thread tool, Offset Description = Left For a Right Thread tool, Offset Description = Right Offset 3D = 0 Offset 2D = 0
![Page 46: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/46.jpg)
- InternalThread (Internal Thread) CuttingEdgeOrigin (Cutting Edge Origin) = frame [A] CoolantNozzle (Coolant Nozzle) ClearanceAngle (Clearance Angle (Alpha)) = [E] InsertThickness (Insert Thickness) = [C] EntryDiameter (Entry Diameter) = [F] CuttingEdgeSize (Cutting Edge Size) CuttingEdgeShape (Cutting Edge Shape(A,B,C..X)) HandOfTool (Hand Of Tool (R/L/N)) Pitch (Pitch) ThreadProfile (Thread Profile)
LEFT RIGHT
Version 7.6.301.084
For this tool, you need to define 1 Tool Offset For a Left Thread tool, Offset Description = Left For a Right Thread tool, Offset Description = Right Offset 3D = 0 Offset 2D = 0
![Page 47: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/47.jpg)
- BallTouch (Ball Touch) TouchOrigin (Touch Origin) = frame [A] TouchDiameter (Touch Diameter) = [B] WorkLength (Work Length) = [C]
For this tool, you need to define 1 Tool Offset
Offset 3D = 0 Offset 2D = 0
![Page 48: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/48.jpg)
- ClampGroove (Clamp Groove) CuttingEdgeShape (Cutting Edge Shape(A,B,C..X)) CuttingEdgeSize (Cutting Edge Size) CuttingEdgeWidth (Cutting Edge Width) CuttingEdgeDepth (Cutting Edge Depth) CornerRadius2 (Corner Radius Right) CornerRadius1 (Corner Radius Left) InsertThickness (Insert Thickness) ClearanceAngle (Clearance Angle (Alpha))
![Page 49: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/49.jpg)
- ClampThread (Clamp Thread) CuttingEdgeShape (Cutting Edge Shape(A,B,C..X)) CuttingEdgeSize (Cutting Edge Size) CornerRadius (Corner Radius) InsertThickness (Insert Thickness) ClearanceAngle (Clearance Angle (Alpha)) ThreadProfile (Thread Profile) Pitch (Pitch)
![Page 50: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/50.jpg)
- ClampInsert (Clamp Insert) CuttingEdgeShape (Cutting Edge Shape(A,B,C..X)) CuttingEdgeSize (Cutting Edge Size) CornerRadius (Corner Radius) InsertThickness (Insert Thickness) ClearanceAngle (Clearance Angle (Alpha))
![Page 51: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/51.jpg)
- ToolingHolder (Tooling Holder) ToolingSystemFrame (Tooling System Frame) ToolingSystemName (Tooling System Name) ToolingSystemType (Tooling System Type) ToolingSystemSize (Tooling System Size)
![Page 52: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/52.jpg)
- ToolingShank (Tooling Shank) ToolingSystemFrame (Tooling System Frame) = [A] ToolingSystemName (Tooling System Name) ToolingSystemSize (Tooling System Size)
For Milling :
For Turning, the rule is : Imagine a turning machine with 1 chuck and 1 simple turret. On the turret, in T1, do a translation of the part origin. When you put the tool on this frame [A], we must see the insert of the tool. With this method, you can fix the Z and X of the “Tooling System Frame”.
![Page 53: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/53.jpg)
So exemple : Left Turn tool :
Right Turn tool :
![Page 54: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/54.jpg)
And generally ( except for Flash Tool) , in the Frame [A], the frame of the tool type (ex “External turn” ) must be at Y=0
![Page 55: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/55.jpg)
- ClampingInsert (Clamping Insert) ClampingSystemName (Clamping System Name) ClampingSystemFrame (Clamping System Frame) ClampingSystemSize (Clamping System Size) ClampingSystemType (Clamping System Type) ClampingSystemName (Clamping System Name) ClampingSystemFrame (Clamping System Frame) ClampingSystemSize (Clamping System Size)
![Page 56: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/56.jpg)
- CylindricalToolingShank (Cylindrical Tooling Shank) MaximalDistance (Maximal Distance) MinimalDistance (Minimal Distance) InitialDistance (Initial Distance) ShankDiameter (Shank Diameter) ToolingSystemFrame (Tooling System Frame)
![Page 57: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/57.jpg)
- CylindricalToolingHolder (Cylindrical Tooling Holder) ShankMinimalDiameter (Shank Minimal Diameter) ShankMaximalDiameter (Shank Maximal Diameter) ToolingSystemName (Tooling System Name) ToolingSystemType (Tooling System Type)
![Page 58: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/58.jpg)
- SquareToolingShank (Square Tooling Shank) MaximalDistance (Maximal Distance) MinimalDistance (Minimal Distance) InitialDistance (Initial Distance) ShankWidth (Shank Width) ShankHeight (Shank Height) ToolingSystemFrameLeft (Tooling System Frame Left) ToolingSystemFrameRight (Tooling System Frame Right)
![Page 59: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/59.jpg)
- SquareToolingHolder (Square Tooling Holder) ShankHeight (Shank Heigth) ToolingSystemFrame (Tooling System Frame) ToolingSystemType (Tooling System Type)
![Page 60: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/60.jpg)
- ToolOffset (Tool Offset) PointCompensation (Point Compensation) = Origin of X, Y plane PlaneCompensation (Plane Compensation) = Plane X,Y = [F] Offset2d (Offset 2d) = [C] Offset3d (Offset 3d) = [D] PlungeDirection (Plunge Direction) = [A] RespectDirection (Respect Direction) = [B] OffsetDescription (Offset Description (Tip,Top,Bottom,Left,Rigth,...))
![Page 61: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/61.jpg)
- CollisionAnalysisRevolutionShape (Collision Analysis Revolution Shape) Revolute Section (Revolute Section)
![Page 62: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/62.jpg)
- CollisionAnalysisShape (Collision Analysis Shape) Shape (Shape)
![Page 63: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/63.jpg)
- Tag (Tag) Tag (Tag)
![Page 64: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/64.jpg)
- CuttingShape (Cutting Shape) Shape (Shape)
![Page 65: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/65.jpg)
- CuttingRevolutionShape (Cutting Revolution Shape) Revolution Section (Revolution Section)
![Page 66: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/66.jpg)
ClampingSystemFrame Clamping System Frame.
Type : TopSolid.Kernel.DB.D3.Frames.PublishingFrameEntity
![Page 67: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/67.jpg)
ClampingSystemName Clamping System Name.
Type : TopSolid.Kernel.DB.Parameters.PublishingTextParameterEntity
![Page 68: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/68.jpg)
ClampingSystemSize Clamping System Size.
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 69: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/69.jpg)
ClampingSystemType Clamping System Type.
Type : TopSolid.Kernel.DB.Parameters.PublishingTextParameterEntity
![Page 70: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/70.jpg)
ClearanceAngle Clearance Angle = [E]
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Angle)
![Page 71: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/71.jpg)
CoolantNozzle Coolant Nozzle.
Type : TopSolid.Kernel.DB.Parameters.PublishingBooleanParameterEntity
![Page 72: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/72.jpg)
CornerRadius Corner Radius = [D]
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 73: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/73.jpg)
CornerRadius1 Left Corner Radius of Groove Insert = [G]
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 74: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/74.jpg)
CornerRadius2 Right Corner Radius of Groove Insert = [H]
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 75: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/75.jpg)
CuttingAngle Cutting Angle = [E]
E = 45° E = 90°
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Angle)
![Page 76: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/76.jpg)
CuttingBottomDiameter Cutting Bottom Diameter = [B]
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 77: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/77.jpg)
CuttingDiameter Cutting Diameter = [B]
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 78: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/78.jpg)
CuttingEdgeDepth Cutting Edge Depth = [D]
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 79: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/79.jpg)
CuttingEdgeOrigin Cutting Edge Origin = Frame [A]
Type : TopSolid.Kernel.DB.D3.Frames.PublishingFrameEntity
![Page 80: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/80.jpg)
CuttingEdgeShape Cutting Edge Shape(A,B,C..X).
Type : TopSolid.Kernel.DB.Parameters.PublishingTextParameterEntity
![Page 81: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/81.jpg)
CuttingEdgeSize Cutting Edge Size
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 82: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/82.jpg)
CuttingEdgeWidth Cutting Edge Width = [B]
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 83: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/83.jpg)
CuttingLength Cutting Length = [C]
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 84: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/84.jpg)
CuttingTopDiameter Cutting Top Diameter = [D]
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 85: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/85.jpg)
CuttingWidth Cutting Width for T Slot cutters = [D]
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 86: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/86.jpg)
DepthDrilling Depth Drilling.
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 87: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/87.jpg)
DepthReaming Depth Reaming.
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 88: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/88.jpg)
- DepthTapping Depth Tapping.
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 89: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/89.jpg)
- DepthThreading Depth Threading.
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 90: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/90.jpg)
- EntryDiameter Entry Diameter.
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 91: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/91.jpg)
FluteLength Flute Length.
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 92: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/92.jpg)
GrooveExternalDiameter Groove External Diameter.
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 93: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/93.jpg)
GrooveInternalDiameter Groove Internal Diameter.
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 94: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/94.jpg)
HandOfTool Hand Of Tool (R/L/N).
Type : TopSolid.Kernel.DB.Parameters.PublishingTextParameterEntity
![Page 95: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/95.jpg)
- InitialDistance Initial Distance.
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 96: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/96.jpg)
- InsertThickness Insert Thickness.
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 97: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/97.jpg)
LeftHand Left-Hand.
Type : TopSolid.Kernel.DB.Parameters.PublishingBooleanParameterEntity
![Page 98: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/98.jpg)
- MaximalDistance Maximal Distance.
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 99: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/99.jpg)
MaximumRampAngle Maximum Ramp Angle.
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Angle)
![Page 100: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/100.jpg)
- MinimalDistance Minimal Distance.
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 101: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/101.jpg)
- NominalDiameter Nominal Diameter.
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 102: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/102.jpg)
- Norm Norm.
Type : TopSolid.Kernel.DB.Parameters.PublishingTextParameterEntity
![Page 103: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/103.jpg)
- NumberOfThreadTeeth Number Of Thread Teeth.
Type : TopSolid.Kernel.DB.Parameters.PublishingIntegerParameterEntity
![Page 104: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/104.jpg)
- NumberOfToolTeeth Number Of Tool Teeth.
Type : TopSolid.Kernel.DB.Parameters.PublishingIntegerParameterEntity
![Page 105: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/105.jpg)
- Offset2d Offset 2d.
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
Offset 2D is a radius value.
![Page 106: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/106.jpg)
- Offset3d Offset 3d. Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length) Offset 3D is a radius value.
![Page 107: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/107.jpg)
- OffsetDescription Offset Description (Tip,Top,Bottom,Left,Rigth,...). Type : TopSolid.Kernel.DB.Parameters.PublishingTextParameterEntity It’s a comment. You can write what you want. But if you want a translation in a another language, you must use this words : Bottom Center Left Right Tip Top Bottom Center Top Center Neutral Undefined
![Page 108: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/108.jpg)
- OverLength Over Length.
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 109: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/109.jpg)
- Pitch Pitch.
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 110: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/110.jpg)
- PlaneCompensation Plane Compensation.
Type : TopSolid.Kernel.DB.D3.Planes.PublishingPlaneEntity
![Page 111: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/111.jpg)
- PlungeDirection
Plunge Direction. Look the green arrow
Type : TopSolid.Kernel.DB.D3.Axes.PublishingAxisEntity
For milling tool :
For External Turn Tool :
LEFT
and Neutral RIGHT
![Page 112: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/112.jpg)
For Internal Turn Tool :
For External Groove Tool :
LEFT
and Neutral RIGHT
![Page 113: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/113.jpg)
For Internal Groove Tool :
… For External Thread Tool
For Internal Thread Tool
LEFT RIGHT
LEFT RIGHT
![Page 114: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/114.jpg)
- PointCompensation Point Compensation.
Type : TopSolid.Kernel.DB.D3.Points.PublishingPointEntity
![Page 115: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/115.jpg)
- RespectDirection
Respect Direction. Look the Magenta arrow.
Type : TopSolid.Kernel.DB.D3.Axes.PublishingAxisEntity
For milling tool :
For External Turn Tool :
LEFT
and Neutral RIGHT
![Page 116: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/116.jpg)
For Internal Turn Tool :
For External Groove Tool and Frontal Groove Tool:
LEFT
and Neutral RIGHT
![Page 117: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/117.jpg)
For Internal Groove Tool :
.. For External Thread Tool
For Internal Thread Tool
LEFT RIGHT
LEFT RIGHT
![Page 118: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/118.jpg)
Revolute Section Revolute Section.
Stock update and Analysis collision
Type : TopSolid.Kernel.DB.D3.Sections.PublishingSectionEntity
![Page 119: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/119.jpg)
Revolution Section Revolution Section.
Stock update and Analysis collision
Type : TopSolid.Kernel.DB.D3.Sections.PublishingSectionEntity
![Page 120: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/120.jpg)
RevolutionProfile Revolution Profile.
Stock update and Analysis collision
Type : TopSolid.Kernel.DB.D3.Sections.PublishingSectionEntity
![Page 121: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/121.jpg)
ShankDiameter Shank Diameter.
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 122: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/122.jpg)
ShankHeight Shank Height.
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 123: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/123.jpg)
ShankMaximalDiameter Shank Maximal Diameter.
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 124: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/124.jpg)
ShankMinimalDiameter Shank Minimal Diameter.
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 125: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/125.jpg)
ShankWidth Shank Width.
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 126: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/126.jpg)
Shape Shape for stock update or analysis collision.
Type : TopSolid.Kernel.DB.D3.Shapes.PublishingShapeEntity
![Page 127: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/127.jpg)
Tag Tag.
Type : TopSolid.Kernel.DB.Parameters.PublishingTextParameterEntity
![Page 128: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/128.jpg)
ThreadProfile Thread Profile.
Type : TopSolid.Kernel.DB.Parameters.PublishingTextParameterEntity
![Page 129: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/129.jpg)
TipAngle Tip Angle.
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Angle)
![Page 130: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/130.jpg)
ToolingSystemFrame Tooling System Frame.
Type : TopSolid.Kernel.DB.D3.Frames.PublishingFrameEntity
![Page 131: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/131.jpg)
ToolingSystemFrameLeft Tooling System Frame Left.
Type : TopSolid.Kernel.DB.D3.Frames.PublishingFrameEntity
![Page 132: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/132.jpg)
ToolingSystemFrameRight Tooling System Frame Right.
Type : TopSolid.Kernel.DB.D3.Frames.PublishingFrameEntity
![Page 133: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/133.jpg)
ToolingSystemName Tooling System Name.
Type : TopSolid.Kernel.DB.Parameters.PublishingTextParameterEntity
![Page 134: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/134.jpg)
ToolingSystemSize Tooling System Size.
Type : TopSolid.Kernel.DB.Parameters.PublishingRealParameterEntity (Length)
![Page 135: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/135.jpg)
ToolingSystemType Tooling System Type.
Type : TopSolid.Kernel.DB.Parameters.PublishingTextParameterEntity
![Page 136: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/136.jpg)
Cutting Tool Material Category Inside TopSolid’Cam , we have this list :
Inside xml file, we have : <PublishingEnumerationParameterEntity> <Id>21</Id> <Name>Cutting Tool Material Category</Name> <Value> <Guid>b50e5d21-e504-4a4f-8c60-727fb2a151d0</Guid> <Id>0</Id> //None </Value> <PublishingName>CuttingToolMaterialCategory</PublishingName> </PublishingEnumerationParameterEntity> The <Guid> b50e5d21-e504-4a4f-8c60-727fb2a151d0 : number is fixed. The <Id> value is : 0:None 1:Unclassified 2:HighCarbonSteel 3:HighSpeedSteel 4:CementedCarbide 5:CoatedCarbide 6:Ceramic 7:Diamond
![Page 137: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/137.jpg)
Tool example 1 : Multi-Diameter Drill solution 1 Example :
You need to define 2 functions “Twist Drill” :
![Page 138: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/138.jpg)
You need to define 4 Tool Offset : Tool offset (1) : Offset 3D = 0 Offset 2D = 0 Tool offset (2) : Offset 3D = 0 Offset 2D = [B1] / 2 Tool offset (3) : Offset 3D = 0 Offset 2D = [B1] / 2 Tool offset (4) : Offset 3D = 0 Offset 2D = [B2] / 2 In this case, we can use :
- the 2 functions (TD_1 and TD_2) to do Drilling operation - only TD_1 to do Counter sinking operation
To have a good stock update and to be able to use this tool in Verify, you must define only 1 “Cutting Revolution Shape” , so you must have only 1 sketch , like this :
![Page 139: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/139.jpg)
![Page 140: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/140.jpg)
Tool example 1 : Multi-Diameter Drill solution 2 Example :
You need to define 2 functions “Twist Drill” :
![Page 141: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/141.jpg)
You need to define 4 Tool Offset : Tool offset (1) : Offset 3D = 0 Offset 2D = 0 Tool offset (2) : Offset 3D = 0 Offset 2D = [B1] / 2 Tool offset (3) : Offset 3D = 0 Offset 2D = 0 Tool offset (4) : Offset 3D = 0 Offset 2D = [B2] / 2 In this case, we can use the 2 functions (TD_1 and TD_2) to do
- Drilling operation - Counter sinking operation
To have a good stock update and to be able to use this tool in Verify, you must define only 1 “Cutting Revolution Shape” , so you must have only 1 sketch , like this :
![Page 142: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/142.jpg)
![Page 143: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/143.jpg)
Tool example 2 : Multi-Diameter Drill Example :
You need to define 2 functions “Twist Drill” :
![Page 144: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/144.jpg)
You need to define 4 Tool Offset : Tool offset (1) : Offset 3D = 0 Offset 2D = 0 Tool offset (2) : Offset 3D = 0 Offset 2D = [B1] / 2 Tool offset (3) : Offset 3D = 0 Offset 2D = [B1] / 2 Tool offset (4) : Offset 3D = 0 Offset 2D = [B2] / 2 To have a good stock update and to be able to use this tool in Verify, you must define only 1 “Cutting Revolution Shape” , so you must have only 1 sketch , like this :
![Page 145: Documentation TopSolid’Cam - Amazon S3...TopSolid ® is a product name of Missler Software. The information and the software contained within this document are subject to change](https://reader030.vdocuments.us/reader030/viewer/2022040223/5e5b139ca70c710a0c030ff9/html5/thumbnails/145.jpg)