docslidchevron-texaco coating manuale.us chevron standard for painting.pdf

Quick Reference Guide

Contents Page

Introduction QR-2

Contacts QR-3

Facilities for Analyzing Lead in Coatings

Coating Manufacturers

Suppliers

Steps to Coating System Selection QR-7

System Number Selection Guide QR-8

Atmospheric Coatings for On- & Offshore

Coatings for Concrete

Coatings Under Insulation & Fireproofing

Internal Vessel Coatings

Water-based Coatings

Coating Compatibility Chart QR-11

Coating System Data Sheets QR-12

List of Available System Data Sheets

System Data Sheets

Acceptable Brands by Generic Classification

Acceptable Brands by Manufacturer

ChevronTexaco Energy Technology Co. QR-1 April 2005

Introduction Coatings Manual—Quick Reference Guide

IntroductionThis Quick-Reference Guide from Chevron's Coatings Manual has been designed to give you easy access to the selection process for certain types of coating projects:

• Atmospheric (both on- and offshore)

• Concrete (mild environment only)

• Internal vessel

• Under insulation and fireproofing

By following the coating selection process, you will find a system data sheet which details the specifications and approved manufacturers for the coatings that fit your project. (See sample system data sheet below.) The design of the data sheet simpli-fies your preparation of a selection-and-specification package for a coating contractor: just photocopy the appropriate data sheet(s) and specification(s).

Note The system data sheets outnumber the references to coating systems in the selection criteria because Chevron has many coating systems in use.

Do not choose a coating system unless you have been directed to do so by following either:

• The selection guide in this publication.• Instructions from one of the Company's coating specialists or a coating

manufacturer.

Also included in this Guide, the Coatings Compatibility Chart is a resource for projects involving maintenance coatings.

For questions about the Guide, contact the CRTC specialists listed on the Contacts page.

Sample of a System Data Sheet

SYSTEM DATA SHEETCoatings Manual Chevron Corporation

2.4Self-Cured Inorganic Zinc | High-Temperature Silicone

1.5 - 2.5 mils

SSPC-SP10 (NACE No. 2) Near-white blast finish.

(min) 4.5 mils

Use pure silicone topcoat only, two coats.

Coat, Generic Classification, DFT

By Max Svc TempVOC (G/L)Product DesignationManufacturer

Anchor Pattern:

Surface Prep:

Total DFT

Touch Up:

Two-Component Systems

» Keep inorganic zinc silicate mixed, using agitated pot while applying.

Ameron Dimetcote 21-9 • 293Ameron Dimetcote 6 500Ameron Dimetcote 9 506Carboline Carbozinc 11 515Carboline Carbozinc 11 HS • 264Dampney Thurmalox 245C Silicone Zinc Dust Primer 413Devoe Catha-Coat 304V • 336Hempel Galvosil 1570.3 • 340Hempel Galvosil 1578 520International Interzinc 311 530PPG Industries Metalhide 1001 Primer 97-673/97-674 397Sherwin Williams B69VZ1/B69VZ3/B69D11 • 312Sherwin Williams Zinc Clad II B69V11/B69D11 462Sigma Tornusil MC 58 7558 528Valspar V13-F-12 • 324

PRIMER

Self-Cured Inorganic Zinc - Solvent

Reducible

2.0 - 3.0 mils DFT

» Non-catalyzed silicones remain tacky until exposed to heat above 300°F to 400°F.* Thumalox 230C topcoat will go over ONLY Thurmaloc 245C Silicone Zinc Dust Primer.

Ameron PSX 892HS • 324Carboline Thermaline 4631WB • 108Dampney Thurmalox 230C* 360Devoe HT-12 572Hempel 5690 400Hempel 5691 586International Intertherm 230 612PPG Industries Pittherm High Heat Silicone 554Sherwin Williams Aluminum 100-A-518 420Sherwin Williams Black 880-B-001 514Sigma Sigmatherm 5267 600Valspar 37-A-1 599

TOPCOAT

Silicone - High Temp Rated to 700°F

1.5 - 2.5 mils DFT

April 2005 QR-2 ChevronTexaco Energy Technology Co.

Coatings Manual—Quick Reference Guide Contacts

Contacts Facilities for Analyzing Lead in Coatings

Clayton Environmental Consultants 800/294-1755 22345 Roethel Drive Novi MI 48375

Forensic Analytical Specialties 800/827-3274 3777 Depot Road, Suite 409 Hayward CA 94545

Coating Manufacturers Manufacturers of Atmospheric and Internal Vessel Coatings

Ameron 714/529-1951 201 North Berry Street Brea CA 92621

Ashland Chemical 800/643-1234 1851 E. First Street, #700 Santa Ana CA 95705-4017

Carboline 314/644-1000 350 Hanley Industrial Court St. Louis MO 63144

Ceilcote 216/831-5500 23700 Chagrin Boulevard Cleveland OH 44122

Dampney Company, Inc. 617/389-2805 85 Paris Street Everett MA 02149

Devoe 502/897-9861 4000 Dupont Circle Louisville KY 40207

Dudick 800/322-1970 P.O. Box 2525 Streetsboro OH 44241

DuPONT Canada, Inc. Modified Polymers Division

519/862-5700 (F) 519/862-5880

Albert Street Corunna, Ontario N0N 1G0 Canada

Glidden 216/344-8000 925 Euclid Avenue Cleveland OH 44115

Hempel Coatings, Inc. (USA) 800/678-6641 6901 Cavalcade Houston TX 77028

Industrial Environmental Coatings 800/449-6525 1831 Blount Rd. Pompano Beach FL 33069

International 800/525-6824 P. O. Box 4806 Houston TX 77210-4806

Jotun Paints 281/842-3300 11245 Highway 225 LaPorte TX 77571

Plasite Protective Coatings 414/437-6561 614 Elizabeth St. Green Bay WI 54308-8147

PPG (Attn Dave Landry) 713/944-8550 P. O. Box 5772 Pasadena TX 77502

Sherwin Williams 800/321-8194 101 Prospect Avenue NW Corporate Offices

Cleveland OH 44115

Sigma 800/221-7978 1401 Destrehan Avenue Harvey LA 70058

Southern Coatings 800/845-0487 P.O. Box 160 Sumpter SC 29151

Tempil 908/757-8300 2901 Hamilton Boulevard So. Plainfield NJ 07080

Tnemec 800/863-6321 6800 Corporate Dr. Kansas City MO 64120-1372

Valspar 416/284-1681 645 Coronation Dr. West Hill, Ontario M1E 4R6 Canada

Manufacturers of Concrete CoatingsDudick (Attn: Customer Service)

800/322-1970 P.O. Box 2525 Streetsboro OH 44241

KCC Corrosion Control Co. (Attn: Sales Engineer)

800/395-5624 4010 Trey Road Houston TX 77084

Master Builders (Attn: Technical Support)

800/821-3582 23700 Chagrin Boulevard Cleveland OH 44122-5554

Plasite Protective Coatings 800/231-2544 P.O. Box 2076 Freeport TX 77541

Plasite Protective Coatings 414/437-6561 614 Elizabeth St. Green Bay WI 54308-8147

Sauereisen (Attn: Technical Service)

412/963-0303 160 Gamma Drive Pittsburgh PA 15238-2989

Sika (Attn: Technical Service)

800/933-7452 12767 E. Imperial Highway Santa Fe Springs CA 90670

Stonhard 800/854-0310 1 Park Avenue Maple Shade NJ 08052


Contacts Coatings Manual—Quick Reference Guide

Manufacturers of Pipeline Coatings3M 512/984-1800

(F) 512/984-35566801 River Place Blvd. Austin TX 78726-9000

Canusa 713/367-8866 (F) 713/292-8571

2408 Timberlock Pl., Bdg C-8 The Woodlands TX 77380-1038


Denso North America Inc. 713/821-3355 (F) 713/821-0304

18211 Chisholm Trail Houston TX 77060

DuPont Canada, Inc. Modified Polymers Division

519/862-5700 (F) 519/862-5880


DuVal 416/284-1681 (contact: Trevor McClery)

Elf Atochem 215/419-7000 (F) 215/419-5305

2000 Market Street Philadelphia PA 19103-3222

Hempel Coatings (USA), Inc. 800/678-6641 (F) 713/674-0616

6901 Cavalcada Houston TX 77028

Lilly Powder Coatings, Inc. Pipe Clad Products Div.

816/421-7400 (F) 816 421-4563

1136 Fayette North Kansas City MO 64116

Montell (Himont) 302/996-6236 (Contact: Ed Phillips) Ed Phillips

Polyguard Products, Inc. 214/875-8421 (F) 214/875-9425

P. O. Box 755 Ennis TX 75119

Polyken Technologies Kendall Co. 800/248-7659 (F) 508/261-6271

15 Hampshire Street Mansfield MA 02048

Power Marketing Group, Inc. 303/741-3993 (F) 303/ 741-2548

6416 So. Quebec St, Suite 41 Englewood CO 80111

Raychem Corp., Ultratec Div. 619/482-8300 (F) 619/ 482-2813

1670 Brandywine Avenue Chula Vista CA 91911

Reilly Industries, Inc. 317/ 247-8141 (F) 317/248-6402

1500 South Tibbs Avenue Indianapolis IN 46241

Sigma Coatings 504/347-4321 800/221-7978

1401 Destrehan Avenue Harvey LA 70058

Tapecoat Co., TC Manufacturing Co., Inc.

847/866-8500 (F) 708/866-8596

1527 Lyons Street Evanston IL 60201-3551

Trenton 713/556-1000 (Contact: Thomas Weber)

Valspar Inc. 416/284-1681 (F) 416/284-6549

645 Coronation Drive West Hill, Ontario M1E 4R6 Canada

Manufacturers of Pipeline Coating ApplicatorsBayou Pipe Coating Co 713/591-1614

(F) 713/591-0284450 N. Sam Houston Parkway East #232 Plants:

Houston Baton Rouge New Iberia

TX LA LA

77060

Bredero Price International, Inc. (Domestic USA)

713/ 974-7211 (F) 713/260-4500

7211 Regency Square Bl. St. 104 Plants:

Houston Fontana Harvey Pearland

TX CA LA TX

77036

Bredero Price International, Inc. (Foreign)

713/999-2600 (F) 713/999-6189

250 North Belt, Suite 220 Plants:

Houston Australia, Indonesia, Malaysia, Nigeria, Scotland, Singapore, U.A.E.

TX 77060

Commercial Coating Services, Inc. (CCSI)

409/539-3294 (F) 409/539-3073

Post Office Box 3296 Plants:

Conroe Bakersfield Conroe

TX CA TX

77305-3296


Coatings Manual—Quick Reference Guide Contacts

Commercial Resins Co. 918/438-6522 (F) 918/437-5410

2001 North 170th East Avenue Plants:

Tulsa Napa Valley Tulsa

OK CA OK

74116

Compression Coat, Inc. 713/353-8597 (F) 409/756-8599

3513 N. Frazer Note: Uses portable equipment

Conroe TX 77303

Energy Coatings Co. (Encoat) Now Bredero Price International, Inc.

Shaw Pipe, Inc. 800/742-9747 (F) 713/367-4304

2408 Timberloch Pl., Bldg C-8 Plants:

The Woodlands Australia; Canada; New Iberia, LA

TX 77380-1038

Suppliers Suppliers of Cement Linings

Permian Enterprises, Inc. (now owned by ICO Inc.)

915/683-1084 (F) 915/683-1319

P. O. Box 2745 Midland TX 79702

Suppliers of Coated Tubing and AccessoriesBaker Hughes Tubular Service (USA: Now owned by ICO, Inc.)

(Overseas: Now owned by Tuboscope Vetco International)

ICO, Inc. 713/872-4994 (F) 713/872-9610

100 Glenborough, Suite 250 Houston TX 77067

Shield Coat, Inc. 504/879-3539 (F) 504/868-3173

Station 1, Box 10185 Houma LA 70363-5990

Tuboscope Vetco Int'l 713/799-5100 (F) 713/799-5183

P. O. Box 808 Houston TX 77001

Suppliers of Fiberglass LiningsAOC 949/495-4195

(F) 949/495-419930100 Town Center Dr., Suite O Laguna Niguel CA 92677-2064

Rice Engineering Corp 800/533-5480 316/793-5483 (F) 316/ 793-5521

1020 Hoover Great Bend KS 67530

Suppliers of Inspection ToolsKTA-Tator Inc. 412/788-1300 115 Technology Drive Pittsburgh PA 15275

Paul N. Gardener Co., Inc. 954/946-9454 (F) 954/946-9309

316 NE First Street Pompano Beach FL 33060

Suppliers of Pipeline Coatings3M 512/984-1800

(F) 512/984-35566801 River Place Blvd. Austin TX 78726-9000

Canusa 713/367-8866 (F) 713/292-8571

2408 Timberlock Pl., Bdg C-8 The Woodlands TX 77380-1038


Denso North America Inc. 713/821-3355 (F) 713/821-0304

18211 Chisholm Trail Houston TX 77060

DuPont Canada, Inc. Modified Polymers Division

519/862-5700 (F) 519/862-5880


Elf Atochem 215/419-7000 (F) 215/419-5305

2000 Market Street Philadelphia PA 19103-3222

Hempel Coatings (USA), Inc. 800/678-6641 (F) 713/674-0616

6901 Cavalcada Houston TX 77028


Contacts Coatings Manual—Quick Reference Guide

Lilly Powder Coatings, Inc. Pipe Clad Products Div.

816/421-7400 (F) 816 421-4563

1136 Fayette North Kansas City MO 64116

Madison Chemical Industries, Inc. 905/878-8863 (F) 905/878-1449

490 McGeachie Drive Milton, Ontario L9T 3V5 Canada

Nap-Gard Pipe Coatings O'Brien Powder Products, Inc.

713/939-4000 (F) 713/939-4027

9800 Genard Street Houston TX 77041

Polyguard Products, Inc. 214/875-8421 (F) 214/875-9425

P. O. Box 755 Ennis TX 75119

Polyken Technologies Kendall Co. 800/248-7659 (F) 508/261-6271

15 Hampshire Street Mansfield MA 02048

Power Marketing Group, Inc. 303/741-3993 (F) 303/ 741-2548

6416 So. Quebec St, Suite 41 Englewood CO 80111

Raychem Corp., Ultratec Div. 619/482-8300 (F) 619/ 482-2813

1670 Brandywine Avenue Chula Vista CA 91911

Reilly Industries, Inc. 317/ 247-8141 (F) 317/248-6402

1500 South Tibbs Avenue Indianapolis IN 46241

Royston Laboratories, Chase Corp 412/828-1500 800/245-3209

128 First Street Pittsburgh PA 15238

Tapecoat Co., TC Manufacturing Co., Inc.

847/866-8500 (F) 708/866-8596

1527 Lyons Street Evanston IL 60201-3551

Valspar Inc. 416/284-1681 (F) 416/284-6549

645 Coronation Drive West Hill, Ontario M1E 4R6 Canada

Suppliers of PVC LiningsRice Engineering Corp 800/533-5480

316/793-5483 (F) 316/ 793-5521

1020 Hoover Great Bend KS 67530

Sealtite 800/835-0133 (F) 316/331-6832

P. O. Box 965 Independence KS 67301


Coatings Manual—Quick Reference Guide Steps to Coating System Selection

Steps to Coating System Selection

Start

Type of Coating:Atmospheric Coating?

Concrete Coating (Mild Environment)?Internal Vessel Coating?

Yes

No

System Number Selection Guide

System Data Sheets

Contact a CRTC Coating Specialist

Coating over an existing system?

Compatibility Chart: Compatible?

Yes

No Photocopy Coating System Fact Sheet.

Attach to spec.

Yes

End

No

Choose a system numberby type of surface, service,voc units.

Locate the correct data sheet by system number


System Number Selection Guide Coatings Manual—Quick Reference Guide

System Number Selection GuideNote Pick a coating system number from one of the following tables then find that number in the System Data Sheets for Coating Systems.

For coatings under insulation & fireproofing, see chart next page.

Atmospheric Coatings for On- & Offshore (1 of 2)

Type of Equipment

OnshoreOff-

shoreStd Hi Perf

Code C/E: Vessels & Heat Exchangers

Uninsulated below 200°F 2.2 3.1 3.1

Uninsulated to 200°F and steamed out 2.6 3.1 3.1

Uninsulated 200–600°F N/R 2.4 2.4

Uninsulated 300-600°F 2.4 N/R N/R

Code D: Tanks

Uninsulated to 200°F 2.2 3.1 3.1

Wind girders 2.2

3.1 N/RFloating roofs (Uninsulated) 2.6

Stairways & railings 2.2

Code F: Furnaces

Structural steel & platforms 2.6 2.6N/R

Stacks, breeching, furnace body to 600°F 2.4 2.4

Code G/K: Pumps, Turbines, Compressors & Drivers

Uninsulated to 200°F N/R 3.8 3.8

Uninsulated 200–600°F 2.4 2.4 2.4

MotorsN/R

3.8 3.8

Externally insulated exhaust ducts N/R 1.4

Code J: Instruments

Field instrument panels (steel) 2.2 2.6 3.1

Weatherproof housings (steel)N/A N/A

3.1

Instrument tubing (stainless)N/R

Instruments (galvanized or aluminum) N/R N/R

Code L: Piping (including Valves & Fittings)

Uninsulated to 200°F 2.2 3.1 3.1

Uninsulated below 200°F steamed out 2.6 3.1 3.1

Uninsulated 200–600°F 2.4 2.4 2.4


Coatings Manual—Quick Reference Guide System Number Selection Guide

Code M: Structural

Concrete N/R N/R N/R

Exposed steel, platforms, ladders, supports 2.2 3.1 3.1

Floor plate (smooth) 4.6 4.5 4.5

Galvanized floor grating repairs 1.6 1.6 1.6

Galvanized stairways and railings

N/A N/A

N/A

Jacket above splash zone; deck modules; boat landing 3.1

Jacket splash zone - structural members 4.2

Jacket splash zone - appurtenances4.1Risers, conductors: splash zone below 140°F not

pressure treated

Risers, conductors: splash zone to 160°F 4.3

Risers, conductors: splash zones to 250°F 4.2

Code P: Electrical Equipment

Galvanized or aluminum N/R N/R N/R

Steel 2.2 3.1 3.1

Code R: Buildings and Control Houses (Exterior)

Galvanized steelN/R N/R

N/AMasonry walls

Steel 2.2 2.6

Wood N/R N/R

Code S: Miscellaneous Equipment

Subsea completion equipmentStandard: High Performance:

N/A N/A 8.411.4

Atmospheric Coatings for On- & Offshore (2 of 2)

Type of Equipment

OnshoreOff-

shoreStd Hi Perf

Coatings for Concrete

Item Temperature Environment Physical Abuse

Coating System by Exposure

Continuous Intermittent

Oil/water Separator < 140°F Oil/water mixture Moderate(1) 20.1 N/A

Secondary Containment < 140°F Hydrocarbons,(2) dilute acids, caustics Mild(1) 20.2 20.2

Moderate(1) 20.1 20.1

Aggressive(3) 20.3 20.3

Equipment Foundations < 140°F Hydrocarbons(2), dilute acids, caustics Mild(4) N/A 20.2

(1) Moderate coating loss due to abrasion, light equipment wear. Possibility of impact on coating.(2) Crude oil, jet fuel, gasoline, etc.(3) Severe coating loss due to abrasion, heavy equipment wear. Definite potential for impact on coating.(4) No coating loss due to abrasion, possible light foot traffic. No physical impact on coating


System Number Selection Guide Coatings Manual—Quick Reference Guide

Coatings Under Insulation & Fireproofing

SubstrateExposure to Temperature Temperature(1) Coating System

Carbon Steel Continuous -50°F to 140°F 12.1

Continuous 140°F to 300°F 12.2

Cyclic (produce wet/dry conditions) 12.3

Continuous Above 300°F Do not coat

Special Conditions Above 300°F 12.7

Stainless Steel Continuous -50°F to 140°F 12.4

Continuous 140°F to 300°F 12.5

Cyclic (produce wet/dry conditions) 12.6

Continuous Above 300°F 12.7

(1) Actual temperature of steel not design temperature.

Internal Vessel Coatings

ServicesNon-Reinforced

Thin Film

ReinforcedGlass Flake Laminate

High Temperature/Pressure

High Temperature/ Cathodic

High Temperature/ Non Cathodic

High Pressure/ Non Cathodic

Fresh Water 8.1 9.1 10.1

Demineralized Water 8.2 9.2 10.2 11.2 11.2.1

Potable Water 8.3 9.3 N/R

Salt Water & Brine 8.4 9.4 10.4 11.4 11.4.1 11.4.2

Produced Water 8.5 9.5 10.5 11.5 11.5.1 11.5.2

Crude Oil (sweet or sour) 8.6 9.6 10.6 11.6 11.6.1 11.6.2

Fuels (low aromatic) 8.7 9.7 10.7

Fuels (high aromatic) 8.8 9.8 10.8

Aromatic Hydrocarbon 8.9 9.9 10.9

Acetone 8.10N/R

Ethyl & Methyl Alcohol 8.11

Water-based Coatings

Manufacturer

New Construction Systems Maintenance Systems

Inorganic Zinc Primer Tie Coat Top Coat Direct to Metal Primer Top Coat

Ameron International Coatings Dimetcote 21-5 Amercoat 220 Amercoat 220 Amercoat 220 Amercoat 220

Carboline Coatings N/A N/A N/A Aquamastic 25 Carboline 3359

Shermin Williams Coatings N/A N/A N/A DTM Acrylic Gloss DTM Acrylic Gloss


Coatings Manual—Quick Reference Guide Coating Compatibility Chart

Coating Compatibility Chart

Coating Being Applied

Coating Being Overcoated

Alk

yd

Am

ine

Epo

xy

Asp

halt

Mas

tic

Chl

orin

ated

Rub

ber

Coa

l Tar

Pai

nt

Epo

xy M

astic

Inor

gani

c Zi

nc

Lacq

uer

Late

x E

mul

sion

Phe

nolic

s

Pol

yam

ide

Epox

y

Pol

yure

than

e

Sili

cone

Alk

yds

Viny

ls

Viny

l Acr

ylic

Was

h P

rimer

s

Alkyd YES YES 3

N/R YES 3

N/R YES N/R YES YES YES YES 3

YES 3

YES YES YES YES

Amine Epoxy N/R YES 2

N/R YES 2

N/R N/R YES N/R N/R N/R YES YES 2

N/R N/R N/R YES

Asphalt Mastic YES N/R YES N/R YES N/R YES N/R YES YES N/R N/R YES N/R N/R YES

Chlorinated Rubber

N/R YES 3

N/R YES 3

LTD YES YES N/R YES YES YES 3

YES 3

N/R YES YES YES

Coal Tar Paints N/R N/R N/R N/R YES N/R YES N/R YES LTD N/R N/R N/R N/R N/R YES

Epoxy Mastic YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES

Inorganic Zinc N/R N/R N/R N/R N/R N/R YES N/R N/R N/R N/R N/R N/R N/R N/R N/R

Lacquer N/R YES 1

N/R YES 1

N/R N/R LTD YES YES N/R YES LTD N/R YES N/R YES

Latex Emulsion

YES YES 3

YES YES 3

YES YES YES YES YES YES YES 3

YES 3

YES YES YES YES

Phenolic YES YES N/R YES N/R YES LTD YES YES YES YES YES YES YES YES YES

Polyamide Epoxy

LTD YES N/R YES N/R LTD YES N/R N/R LTD YES YES LTD N/R N/R YES

Polyurethane N/R YES 2

N/R YES 2

N/R N/R YES N/R YES N/R YES YES 2

N/R N/R N/R YES

Silicone Alkyd YES YES 3

N/R YES 3

N/R YES YES YES YES YES YES 3

YES 3

YES YES YES YES

Vinyl N/R N/R LTD N/R LTD N/R YES N/R YES N/R N/R N/R N/R YES YES LTD

Vinyl Acrylic LTD YES N/R YES LTD YES YES N/R YES LTD YES YES YES YES YES YES

Wash Primers N/R N/R N/R N/R N/R N/R YES N/R N/R N/R N/R N/R N/R N/R N/R N/R

Notes:YES: Applied coating will not lift, wrinkle, blister; will have reasonable bond; check in field with a test patch.LTD: Some formulae are compatible; some not. Consult manufacturer.N/R: Not recommended1 Durability and use depend on type of lacquer.2 Must apply topcoat before coated surface has hardened.3 Gloss on paint being overcoated must be removed by weathering or sanding.4 Topcoat may blister if high-solvent topcoat applied too thickly, too quickly.


Coating System Data Sheets Coatings Manual—Quick Reference Guide

Coating System Data Sheets

Available System Data Sheets

Primer Only Systems1.1 Inhibited Alkyd (Primer Only)1.2 Silicone Alkyd (Primer Only)1.3 Self-Cured Inorganic Zinc–Solvent Reducible (Primer Only)1.3.1 Self-Cured Inorganic Zinc–Water Reducible1.4 Polyamide Epoxy (Primer Only)1.5 Amine Adduct Epoxy (Primer Only)1.6 Organic Zinc-Rich Primer for Galvanizing Repair1.7 Vinyl Butyral Wash Primer1.8 Epoxy Mastic–Surface-Tolerant Prime1.8.1 Epoxy Mastic–Surface-Tolerant Primer–Aluminum Color Only1.9 Temperature-Indicating Paint

Two-Component Systems2.1 Inhibited Alkyd | Alkyd Enamel2.2 Inhibited Alkyd | Alkyd Enamel | Alkyd Enamel2.3 Silicone Alkyd | Silicone Acrylic2.4 Self-Cured Inorganic Zinc | High-Temperature Silicone2.5 Self-Cured Inorganic Zinc | Silicone Acrylic2.6 Self-Cured Inorganic Zinc | Polyamide Epoxy (High Build)2.7 High-Temperature Silicone | High-Temperature Silicone2.8 Manufacturer's Standard | Alkyd Enamel2.9 Manufacturer's Standard | Alkyd Enamel | Alkyd Enamel2.10 Manufacturer's Standard | Silicone Acrylic2.11 Manufacturer's Standard | High-Temperature Silicone2.12 Epoxy Mastic–Surface-Tolerant Primer | Polyamide Epoxy (Finish)2.12.1 Epoxy Mastic–Surface-Tolerant Primer–Aluminum Color Only |

Aliphatic Polyurethane2.13 Epoxy Mastic–Surface-Tolerant Primer | Polyamide Epoxy (High

Build)2.13.1 Epoxy Mastic–Surface-Tolerant Primer–Aluminum Color Only |

Polyamide Epoxy (High Build)


Coatings Manual—Quick Reference Guide Coating System Data Sheets

2.14 Polyamide Epoxy | Polyamide Epoxy2.15 Epoxy Mastic–Surface-Tolerant Primer | Aliphatic Polyurethane2.15.1 Epoxy Mastic–Surface-Tolerant Primer–Aluminum Color Only |

Aliphatic Polyurethane

Three-Component Systems3.1 Self-Cured Inorganic Zinc | Polyamide Epoxy (High Build) | Aliphatic

Polyurethane3.1.1 Self-Cured Inorganic Zinc | Polyamide Epoxy (High Build) | Aliphatic

Polyurethane3.2 Zinc-Rich Epoxy | Polyamide Epoxy (High Build) | Aliphatic Polyure-

thane3.3 Self-Cured Inorganic Zinc | Vinyl Tie-Coat | Vinyl (High Build) |

Vinyl (High Build)3.3.1 Self-Cured Inorganic Zinc | Vinyl Tie-Coat | Vinyl (High Build) |

Vinyl (High Build)3.4 Zinc-Rich Epoxy | Vinyl (High Build) | Vinyl (High Buid)3.5 Epoxy Mastic | Polyamide Epoxy (High Build) | Aliphatic Polyure-

thane3.5.1 Epoxy Mastic—Aluminum Color Only | Polyamide Epoxy (High

Build) | Aliphatic Polyurethane3.6 (reserved for future use)3.7 Manufacturer's Standard | Universal Primer | Polyamide Epoxy (High

Build) | Aliphatic Polyurethane3.8 Manufacturer's Standard | Universal Primer | Aliphatic Polyurethane

Specialty Coating Systems4.1 Splash Zone Coating—Sprayable4.1.1 Splash Zone Compound—Asbestos Free Rated to Cure Underwater4.2 Monel Sheath for Splash Zones4.3 Vulcanized Neoprene for Splash Zones4.4 Polyamide Epoxy | Fireproofing | Polyamide Epoxy (High Build) |

Aliphatic Polyurethane4.5 Polyester Non-Skid | 20–30 Mesh Grit | Polyester Non-Skid4.6 Epoxy Non-Skid | Grit | Epoxy Non-Skid



Non-Reinforced Thin Film Coatings for Immersion Service8.1 Non-Reinforced Thin-Film Coatings for Fresh-Water Immersion

Service8.2 Non-Reinforced Thin-Film Coatings for Demineralized Water or

Condensate Immersion Service8.3 Non-Reinforced Thin-Film Coatings for FDA-Approved Potable

Water Immersion Service8.4 Non-Reinforced Thin-Film Coatings for Salt Water and Brine Immer-

sion Service8.5 Non-Reinforced Thin-Film Coatings for Produced-Water Immersion

Service8.6 Non-Reinforced Thin-Film Coatings for Crude Oil (Sweet or Sour)

Immersion Service8.7 Non-Reinforced Thin-Film Coatings for Fuel (Low-aromatic) Immer-

sion Service8.8 Non-Reinforced Thin-Film Coatings for Fuel (High-Aromatic)

Immersion Service8.9 Non-Reinforced Thin-Film Coatings for Aromatic-Hydrocarbon

Immersion Service8.10 Non-Reinforced Thin-Film Coatings for Acetone Immersion Service8.11 Non-Reinforced Thin-Film Coatings for Ethyl & Methyl Alcohol

Immersion Service

Glass Flake Reinforced Coatings for Immersion Service9.1 Glass-Flake-Reinforced Coatings for Fresh-Water Immersion Service9.2 Glass-Flake-Reinforced Coatings for Demineralized Water or Conden-

sate Immersion Service9.3 Glass-Flake-Reinforced Coatings for FDA-Approved Potable Water

Immersion Service9.4 Glass-Flake-Reinforced Coatings for Salt Water and Brine Immersion

Service9.5 Glass-Flake-Reinforced Coatings for Produced Water Immersion

Service9.6 Glass-Flake-Reinforced Coatings for Crude Oil (Sweet or Sour)

Immersion Service9.7 Glass-Flake-Reinforced Coatings for Fuel (Low Aromatic) Immer-

sion Service9.8 Glass-Flake-Reinforced Coatings for Fuel (High Aromatic) Immer-

sion Service9.9 Glass-Flake-Reinforced Coatings for Aromatic Hydrocarbon Immer-

sion Service


Coatings Manual—Quick Reference Guide Coating System Data Sheets

Laminate Reinforced Coatings for Immersion Service10.1 Laminate-Reinforced Coatings for Fresh-Water Immersion Service10.2 Laminate-Reinforced Coatings for Demineralized-Water or Conden-

sate Immersion Service10.3 (reserved for future use)10.4 Laminate-Reinforced Coatings for Salt-Water Brine Immersion

Service10.5 Laminate-Reinforced Coatings for Produced-Water Immersion Service10.6 Laminate-Reinforced Coatings for Crude-Oil (Sweet or Sour) Immer-

sion Service10.7 Laminate-Reinforced Coatings for Fuel (Low Aromatic) Immersion

Service10.8 Laminate-Reinforced Coatings for Fuel (High Aromatic) Immersion

Service10.9 Laminate-Reinforced Coatings for Aromatic Hydrocarbon Immersion

Service

High-Temperature/High-Pressure Coating Systems11.1 (reserved for future use)11.2 Demineralized Water or Condensate Coatings Resistant to Tempera-

ture Gradients of 50°F & Compatible with Cathodic Protection11.2.1 Demineralized Water or Condensate Coatings Resistant to Tempera-

ture Gradients of 50°F & Incompatible with Cathodic Protection11.3 (reserved for future use)11.4 Salt Water & Brine Service Coatings Resistant to Temperature Gradi-

ents of 50°F & Compatible with Cathodic Protection11.4.1 Salt Water & Brine Service Coatings Resistant to Temperature Gradi-

ents of 50°F & Incompatible with Cathodic Protection11.4.2 Salt Water & Brine High Temperature/High Pressure Service Coatings

Resistant to Temperatures to 180°F, Pressures of 1000 PSI & Incompatible with Cathodic Protection

11.5 Produced Water Service Coatings Resistant to Temperature Gradients of 50°F & Compatible with Cathodic Protection

11.5.1 Produced Water Service Coatings Resistant to Temperature Gradients of 50°F & Incompatible with Cathodic Protection

11.5.2 Produced Water High Temperature/High Pressure Service Coatings Resistant to Temperatures to 180°F, Pressures of 1000 PSI & Incom-patible with Cathodic Protection

11.5.2 Crude Oil Service (Sweet or Sour) Coatings Resistant to Temperature Gradients of 50°F & Compatible with Cathodic Protection



11.6.1 Crude Oil Service (Sweet or Sour) Coatings Resistant to Temperature Gradients of 50°F & Incompatible with Cathodic Protection

11.6.2 Crude Oil (Sweet or Sour) High Temperature/High Pressure Service Coatings Resistant to Temperatures to 180°F, Pressures of 1000 PSI & Incompatible with Cathodic Protection

Coatings Under Insulation & Fireproofing12.1 Under Insulation & Fireproofing—Non-Reinforced Thin Film Epoxy

Coatings for Continuous Carbon Steel Temperatures -50°F to 450°F12.4 Under Insulation & Fireproofing—Non-Reinforced Thin Film Epoxy

Coatings for Continuous Stainless Steel Temperatures -50°F to 450°F12.7 Under Insulation & Fireproofing—Non-Reinforced Thin Film Inor-

ganic Coatings for Carbon Steel or Stainless Steel Temperatures Above 450°F

(Series 13 through 19 Reserved for Future Use)

Concrete Coatings20.1 Epoxy Coatings for Concrete: Service Temperatures <140°F,

Moderate Physical Abuse, Intermittent & Continuous Exposure20.2 Epoxy Coatings for Concrete: Service Temperatures <140°F, Mild

Physical Abuse, Intermittent & Continuous Exposure20.3 Epoxy Coatings for Concrete: Service Temperatures <140°F, Aggres-

sive Physical Abuse, Intermittent & Continuous Exposure

Rivet and Seam Sealers 13.1 Rivet and Seam Sealers (Spray) - Epoxy13.2 Rivet and Seam Sealer (Trowel) - Epoxy13.3 Rivet and Seam Sealer - Isophthalic Polyester13.4 Rivet and Seam Sealer - Vinyl Ester13.5 Polysulfide Flexible Putty


SYSTEM DATA SHEET Coatings ManualChevron Corporation

1.1Inhibited Alkyd (Primer Only)

1.5 mils (max)

SSPC-SP6 (NACE No. 3) Commercial blast finish.

2.0 mils

Use this system.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:

Primer Only System

Ameron Amercoat 5105 • 336Carboline Carbocoat 115SG 408Devoe Devguard 4160 419Hempel Coatings (USA), Inc. Hempalin Primer 1205 415Hempel Coatings (USA), Inc. Hempalin Primer 1218 • 330International Interlac 260 • 300International Interprime 198 509Jotun Paints Cromoprimer 400Sherwin Williams Hi-Solids Alkyd Metal Primer B50NZ2 • 308Sigma Coatings Sigmarine Multiprimer 7117 390Sigma Coatings Sigmarine Primer ZP 7135 372Southern Coatings 94-258 Series • 336Tnemec Company Azeron Primer FD88 • 330Tnemec Company Versare Primer 4 342

PRIMERAlkyd - Inhibited

1.5 - 2.5 mils DFT

QRG - 1

• VOC at or below 340 g/l is the anticipated regulatory limit. Check local standards for current VOC limits.Consult manufacturer's product data sheets for specific details about applying any coating.

May 1998Last Update: 3/17/2003


1.2Silicone Alkyd (Primer Only)

1.0 mils (max)


1.5 mils (min)

Use this system.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:

Primer Only System

Ameron Amercoat 894 588Carboline Carbocoat 150HG • 336Devoe Catha-Coat 302H • 282International Interlac 800 • 333Jotun Paints Aluminum Paint HR 400PPG Industries 97-480 414Sherwin Williams Kem Hi-Temp 850 Series 550

PRIMERSilicone Alkyd

1.5 - 2.5 mils DFT

QRG - 2




1.3Self-Cured Inorganic Zinc - Solvent Reducible (Primer Only)

1.5 - 2.5 mils


3.0 mils (min)

Use this system.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:

Primer Only System

Keep inorganic zinc silicate mixed, using agitated pot while applying. See also System 1.3.1 (water reducible).

Ameron Dimetcote 9 491Ameron Dimetcote 9HS • 323Carboline Carbozinc 11 515Carboline Carbozinc 11 HS • 264Dampney Company, Inc. Thurmalox 215 • 274Devoe Catha-Coat 304V • 336Hempel Coatings (USA), Inc. Galvosil 15680 • 320Hempel Coatings (USA), Inc. Galvosil 1578 520International Interzinc 22 490International Interzinc 22HS • 340Jotun Paints Resist GTI 458PPG Industries Metalhide 1001 Primer 97-673/97-674 397Sherwin Williams Zinc Clad II B69V3/B69D11 462Sigma Coatings Penetrating Sealer SF 8353 • 48Tnemec Company SpanPrime IOZ 356 397Tnemec Company Tneme-Zinc 90-96 • 323

PRIMERSelf-Cured Inorganic

Zinc - Solvent Reducible

2.0 - 3.0 mils DFT

QRG - 3




1.3.1Self-Cured Inorganic Zinc - Water Reducible

1.5 - 3.0 mils


6.0 mils (min)

Use this system.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:

Primer Only System

Keep inorganic zinc silicate mixed, using agitated pot while applying. See also System 1.3 (solvent reducible).

Ameron Dimetcote 21-5 • 0Carboline Carbozinc 11 WB • 0Devoe Catha-Coat 305 • 0Hempel Coatings (USA), Inc. Galvosil 1562 • 0International Interzinc 685 • 0Jotun Paints Jotacote 5 • 0Sherwin Williams Zinc Clad XI B69V11/B69D11 • 0Sigma Coatings Silguard SC 7550 • 0


Zinc - Water Reducible

3.0 - 4.0 mils DFT (topcoated) 4.0 - 5.0

mils DFT (untopcoated)

QRG - 4




1.4Polyamide Epoxy (Primer Only)

1.5 - 2.5 mils


3.0 mils (min)

Use this system.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:

Primer Only System

Where moisture will tend to collect under wet insulation (such as at insulation support rings) select Coating System 2.14.

Ameron Amercoat 385 • 276Carboline Carboguard 893 • 195Devoe Devran 224HS • 212Hempel Coatings (USA), Inc. Hempadur 4563 • 207Hempel Coatings (USA), Inc. Hempadur 45880 • 215International Interseal 670 HS • 240Jotun Paints Penguard HB 380PPG Industries 97-145 • 128Sherwin Williams Recoatable Epoxy Primer B67R5/B67V5 • 295Sigma Coatings Sigmacover Primer II 7413US • 300Sigma Coatings Sigmarite PC Unicoat 5483 PC • 252Tnemec Company Hi-Build Epoxoline 66 362Tnemec Company S.T. Typoxy N27 • 300

PRIMEREpoxy - Polyamide

3.0 - 4.0 mils DFT

QRG - 5




1.5Amine Adduct Epoxy (Primer Only)

1.5 - 2.5 mils


3.0 mils (min)

Use this system.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:

Primer Only System

Ameron Amercoat 90HS • 323Carboline Phenoline 187 • 312Ceilcote Flakeline 600 • 210Devoe Bar-Rust 236 • 170Dudick Primer 67 • 0Hempel Coatings (USA), Inc. Hempadur 3553 • 0Hempel Coatings (USA), Inc. Hempadur 4515 • 180International Interseal 670 HS • 240Jotun Paints Tankguard HB 390PPG Industries UC59633/97-139 342Sherwin Williams Phenicon HS 920-W-A11/700-C-685 • 230Sigma Coatings TCP 7476 • 224Tnemec Company Hi-Build Epoxoline II N69 • 253

PRIMEREpoxy - Amine Adduct

3.0 - 4.0 mils DFT

QRG - 6




1.6Organic Zinc-Rich Primer for Galvanizing Repair

1.5 - 2.5 mils

SSPC-SP7 (NACE No. 4) Brush-blast finish, preferred. SPPC-SP3 Power-brush finish, acceptable.

3.0 mils (min)

Use this system.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:

Primer Only System

Ameron Amercoat 68HS • 288Carboline Carbozinc 859 • 325Devoe Catha-Coat 313 • 282Hempel Coatings (USA), Inc. Zinc Primer 1649 593International Interzinc 280 • 100International Interzinc 52 • 336Jotun Paints Barrier • 294PPG Industries UC65147/97-674 • 336Sherwin Williams Zinc Clad 5 B69A45 488Sigma Coatings Sigmacover Zinc Primer II 7402 US • 300Tnemec Company Tneme-Zinc 90-97 • 320

PRIMERZinc-Rich -

Galvanizing Repair

3.0 - 4.0 mils DFT

QRG - 7




1.7Vinyl Butyral Wash Primer

None

SSPC-SP1 Solvent Cleaning.

0.2 - 0.5 mils (min) (depending on manufacturer)

Use this system.



Anchor Pattern:Surface Prep:

Total DFT:

Touch Up:

Primer Only System

Normally, we do not paint galvanized, aluminum, and stainless steel surfaces. If Chevron specifies or approves in writing the painting of such surfaces, then prepare the surface first with one coat of vinyl butyral wash primer before topcoating with the specified system. Topcoat the wash-primed surface within 24 hours with the system specified for the adjacent steel. Do not include the inorganic zinc primer when topcoating with Coating Systems 3.1 and 3.3. Do not exceed the manufacturer's recommended pot life for the vinyl butyral wash primer.

Ameron Galvaprep • 0Carboline Rustbond Penetrating Sealer • 24Carboline Rustbond Penetrating Sealer • 24Devoe Vy-Kote 443 740Hempel Coatings (USA), Inc. Hemucryl TI-Coat 1820 • 140International Interprime 519 702Jotun Paints Washprimer 708PPG Industries 97-687/688 Polyclutch Wash Primer 742Sherwin Williams DTM Wash Primer B71Y1 • 143

PRIMERVinyl

Butyral Wash Primer

0.2 - 0.5 mils DFT (depending on manufacturer)

QRG - 8




1.8Epoxy Mastic - Surface-Tolerant Primer

2.0 - 3.0 mils


5.0 mils (min)

Use this system.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:

Primer Only System

Available in colors. May use System 1.8.1 Aluminum-Filled Epoxy Mastic (Surface-Tolerant Primer) for better performance if aluminum color is acceptable.

Ameron Amerlock 400 • 120Carboline Carboguard 890 • 214Devoe Bar-Rust 231 • 247Hempel Coatings (USA), Inc. Hempadur 45880 • 215International Interseal 670 HS • 240Jotun Paints Jotamastic 87 • 196PPG Industries 97-145 • 128Sherwin Williams Dura-Plate 235 B67-235 Series B67/V235 • 272Sigma Coatings TCP 7476 • 224Tnemec Company Chembuild 135 • 133

PRIMEREpoxy Mastic -

Surface Tolerant

5.0 - 7.0 mils DFT

QRG - 9




1.8.1Epoxy Mastic - Surface-Tolerant Primer - Aluminum Color Only

2.0 - 3.0 mils


5.0 mils (min)

Use this system.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:

Primer Only System

System 1.8 is available in colors.

Ameron Amerlock 400 AL • 120Carboline Carbomastic 15 • 88Devoe Bar-Rust 239 • 119Hempel Coatings (USA), Inc. Hempadur 4588-1987 • 215International Interseal 670 HS • 240Jotun Paints Jotamastic 87 AL • 110PPG Industries UC65372/UC65373 • 118Sherwin Williams Epoxy Mastic Aluminum II B62S100/BV100 • 171Sigma Coatings TCP Aluminum 7477 • 240Tnemec Company Chembuild 135-1243 • 133


Surface Tolerant - Aluminum Filled

5.0 - 7.0 mils DFT

QRG - 10




1.9Temperature-Indicating Paint

1.0 - 2.0 mils


2.0 mils (max)

Use this system.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:

Primer Only System

Case-by-case review of applications is required; time at temperature variations are substantial.

International Intertherm 715 550Tempil Temp-Alarm 126A 560

PRIMERTemperature-

Indicating Paint

1.0 - 2.0 mils DFT

VOC limits for these products vary from state to state. Check local regulations before using a product,

QRG - 11




2.1Inhibited Alkyd | Alkyd Enamel

1.5 mils (max)


4.0 mils (min)

Use this system.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:


Ameron Amercoat 5105 • 336Carboline Carbocoat 115SG 408Devoe Devguard 4160 419Hempel Coatings (USA), Inc. Hempalin Primer 1218 • 330International Interlac 260 • 300International Interprime 198 509Jotun Paints Cromoprimer 400PPG Industries 7-852 Series Industrial Primers 376Sherwin Williams Hi-Solids Alkyd Metal Primer B50NZ2 • 308Sigma Coatings Sigmarine Multiprimer 7117 390Sigma Coatings Sigmarine Primer ZP 7135 372Tnemec Company Azeron Primer FD88 • 330Tnemec Company Versare Primer 4 342


2.0 - 3.0 mils DFT

Ameron Amercoat 220 • 180Ameron Amercoat 5405 • 327Carboline Carbocoat 139 • 240Devoe Devguard 4308 428Devoe Devguard 4348 • 340Hempel Coatings (USA), Inc. Hempalin Enamel 5214 410International Interlac 665 427Jotun Paints Pilot II 418PPG Industries 7-282 • 336Sherwin Williams Industrial Enamel B54Z Series 417Sherwin Williams Industrial Enamel VOC B54-Z Series • 309Sigma Coatings Sigmarine BTD 7238 345Tnemec Company Enduratone 23 341Tnemec Company Hi-Build Tneme-Gloss 2H 351

TOPCOATAlkyd Enamel

2.0 - 3.0 mils DFT

QRG - 12




2.2Inhibited Alkyd | Alkyd Enamel | Alkyd Enamel

1.5 mils (max)


6.0 mils (min)

Use this system.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:


Ameron Amercoat 5105 • 336Carboline Carbocoat 115SG 408Devoe Devguard 4160 419Hempel Coatings (USA), Inc. Hempalin Primer 1218 • 330International Interlac 260 • 300International Interprime 198 509Jotun Paints Cromoprimer 400PPG Industries 7-852 Series Industrial Primers 376Sherwin Williams Hi-Solids Alkyd Metal Primer B50NZ2 • 308Sigma Coatings Sigmarine Multiprimer 7117 390Sigma Coatings Sigmarine Primer ZP 7135 372Tnemec Company Azeron Primer FD88 • 330Tnemec Company Versare Primer 4 342


2.0 - 3.0 mils DFT

Ameron Amercoat 5405 • 327Carboline Carbocoat 139 • 240Devoe Devguard 4308 428Devoe Devguard 4348 • 340Hempel Coatings (USA), Inc. Hempalin Enamel 5214 410International Interlac 665 427PPG Industries 7-282 • 336Sherwin Williams Industrial Enamel B54Z Series 417Sherwin Williams Industrial Enamel VOC B54-Z Series • 309Sigma Coatings Sigmarine BTD 7238 345Tnemec Company Enduratone 23 341Tnemec Company Hi-Build Tneme-Gloss 2H 351

TIECOATAlkyd Enamel

2.0 - 3.0 mils DFT

Ameron Amercoat 5405 • 327Carboline Carbocoat 139 • 240Devoe Devguard 4308 428Devoe Devguard 4348 • 340Hempel Coatings (USA), Inc. Hempalin Enamel 5214 410International Interlac 665 427Jotun Paints Pilot II 418PPG Industries 7-282 • 336Sherwin Williams Industrial Enamel B54Z Series 417Sherwin Williams Industrial Enamel VOC B54-Z Series • 309Sigma Coatings Sigmarine BTD 7238 345Tnemec Company Enduratone 23 341Tnemec Company Hi-Build Tneme-Gloss 2H 351

TOPCOATAlkyd Enamel

2.0 - 3.0 mils DFT

QRG - 13




2.3Silicone Alkyd | Silicone Acrylic

1.0 mils (max)


3.0 mils (min)

Use this system.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:


Carboline Carbocoat 150HG • 336Hempel Coatings (USA), Inc. Alkyd Enamel 538U 397Ameron Amercoat 894 350°F 588PPG Industries UC46654 450°F 554Sherwin Williams Thermo-Cure B59A380 450°F 376Jotun Paints Aluminum Paint HR 482°F 400Dampney Company, Inc. Thurmalox 260C 500°F• 333Devoe HT-8 500°F 433International Intertherm 875 500°F 562

PRIMERSilicone Alkyd

1.5 - 2.5 mils DFT

* Many of these coatings require a heated curing before handling.

Hempel Coatings (USA), Inc. 5694 415Jotun Paints Solvalitt 497Ameron Amercoat 894 350°F 588Devoe HT-4 425°F 548Carboline Thermoline 4900 450°F 564PPG Industries 97-710 450°F 568Sherwin Williams Thermo-Cure B59A380 450°F 376Dampney Company, Inc. Thurmalox 260C 500°F• 333International Intertherm 875 500°F 562

TOPCOATSilicone Acrylic

1.5 - 2.5 mils DFT

QRG - 14




2.4Self-Cured Inorganic Zinc | High-Temperature Silicone

1.5 - 2.5 mils


4.5 mils (min)




Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:


Keep inorganic zinc silicate mixed, using agitated pot while applying.

Some of these coatings require a heated curing before handling.

Ameron Dimetcote 9 491Ameron Dimetcote 9HS • 323Carboline Carbozinc 11 515Carboline Carbozinc 11 HS • 264Dampney Company, Inc. Thurmalox 245C Silicone Zinc Dust Primer 413Devoe Catha-Coat 304V • 336Hempel Coatings (USA), Inc. Galvosil 1578 520International Interzinc 22 490International Interzinc 22HS • 340Jotun Paints Resist GTI 458PPG Industries Metalhide 1001 Primer 97-673/97-674 397Sherwin Williams Zinc Clad II B69V3/B69D11 462Sherwin Williams Zinc Clad II HS B69VZ1/B69VZ3/B69D11 • 312Sigma Coatings Silguard MC II 7551 US • 324Tnemec Company SpanPrime IOZ 356 397Tnemec Company Tneme-Zinc 90-96 • 323



2.0 - 3.0 mils DFT

Non-catalyzed silicones remain tacky until exposed to heat above 300°F to 400°F. * Thumalox 230C topcoat will go over ONLY Thurmaloc 245C Silicone Zinc Dust Primer.

Ameron PSX 892HS • 324Carboline Thermaline 4700 480Dampney Company, Inc. Thurmalox 230C* 360Devoe HT-12 572Hempel Coatings (USA), Inc. 5690 400Hempel Coatings (USA), Inc. 5691 586International Intertherm 50 495Jotun Paints Solvalitt 497PPG Industries 97-724 554Sherwin Williams Hi-Temp Aluminum 100-A-518 420Sigma Coatings Sigmatherm Aluminum 5267 600Tnemec Company Silicone Aluminum 39-1061 587

TOPCOATSilicone - High Temp

1.5 - 2.5 mils DFT

QRG - 15




2.5Self-Cured Inorganic Zinc | Silicone Acrylic

1.5 - 2.5 mils


4.5 mils (min)

Coating System 2.3



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



Ameron Dimetcote 9 491Ameron Dimetcote 9HS • 323Carboline Carbozinc 11 515Carboline Carbozinc 11 HS • 264Devoe Catha-Coat 304V • 336Hempel Coatings (USA), Inc. Galvosil 15680 • 320Hempel Coatings (USA), Inc. Galvosil 1578 520International Interzinc 22 490International Interzinc 22HS • 340Jotun Paints Resist GTI 458PPG Industries Metalhide 1001 Primer 97-673/97-674 397Sherwin Williams Zinc Clad II B69V3/B69D11 462Sherwin Williams Zinc Clad II HS B69VZ1/B69VZ3/B69D11 • 312



2.0 - 3.0 mils DFT


Ameron Amercoat 874HS 420Carboline Thermoline 4900 564Dampney Company, Inc. Thurmalox 260C • 333Devoe HT-4 548Hempel Coatings (USA), Inc. 5694 415International Intertherm 875 562Jotun Paints 37-F-209 492PPG Industries 97-710 568Sherwin Williams Thermo-Cure B59A380 376


1.5 - 2.5 mils DFT

QRG - 16




2.6Self-Cured Inorganic Zinc | Polyamide Epoxy (High Build)

1.5 - 2.5 mils


8.0 mils (min)

Coating System 2.13. DO NOT touch up with primer from Coating System 2.6 after applying topcoat.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



Ameron Dimetcote 9 491Ameron Dimetcote 9HS • 323Carboline Carbozinc 11 515Carboline Carbozinc 11 HS • 264Devoe Catha-Coat 304V • 336Hempel Coatings (USA), Inc. Galvosil 15680 • 320Hempel Coatings (USA), Inc. Galvosil 1578 520International Interzinc 22 490International Interzinc 22HS • 340Jotun Paints Resist 78 465PPG Industries Metalhide 1001 Primer 97-673/97-674 397Sherwin Williams Zinc Clad II B69V3/B69D11 462Sherwin Williams Zinc Clad II HS B69VZ1/B69VZ3/B69D11 • 312Sigma Coatings Silguard MC II 7551 US • 324Tnemec Company SpanPrime IOZ 356 397Tnemec Company Tneme-Zinc 90-96 • 323



2.0 - 3.0 mils DFT

Follow the manufacturer's instructions.

Ameron Amercoat 385 • 276Carboline Carboguard 890 • 214Devoe Devran 224HS • 212Hempel Coatings (USA), Inc. Hempadur 4520 400Hempel Coatings (USA), Inc. Hempadur 45880 • 215International Interseal 670 HS • 240Jotun Paints Penguard HB 380PPG Industries Aquapon 97-130 373Sherwin Williams Macropoxy 646 B58-600 Series/B68V600 • 235Sigma Coatings CM II 7456 US • 300Tnemec Company Hi-Build Epoxoline II N69 • 253Tnemec Company S.T. Typoxy N27 • 300

TOPCOATEpoxy - Polyamide

High Build

5.0 - 7.0 mils DFT

QRG - 17




2.7High-Temperature Silicone | High-Temperature Silicone

1.0 mils (max)


3.0 mils (min)

Use this system.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



Ameron PSX 892HS • 324Carboline Thermaline 4700 480Dampney Company, Inc. Thurmalox 245C Silicone Zinc Dust Primer 413Devoe HT-12 572Hempel Coatings (USA), Inc. 5690 400Hempel Coatings (USA), Inc. 5691 586International Intertherm 50 495Jotun Paints Solvalitt 497PPG Industries 97-724 554Sherwin Williams Hi-Temp Aluminum 100-A-518 420Tnemec Company Silicone Aluminum 39-1061 587

PRIMERSilicone - High Temp

1.5 - 2.5 mils DFT


Ameron PSX 892HS • 324Carboline Thermaline 4700 480Dampney Company, Inc. Thurmalox 230C* 360Devoe HT-12 572Hempel Coatings (USA), Inc. 5690 400Hempel Coatings (USA), Inc. 5691 586International Intertherm 50 495Jotun Paints Solvalitt 497PPG Industries 97-724 554Sherwin Williams Hi-Temp Aluminum 100-A-518 420Tnemec Company Silicone Aluminum 39-1061 587


1.5 - 2.5 mils DFT

QRG - 18




2.8Manufacturer's Standard | Alkyd Enamel

1.0 mils (max)


3.0 mils (min)

Coating System 2.1



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:


PRIMER

1.0 mil (min) DFT



TOPCOATAlkyd Enamel

2.0 - 3.0 mils DFT

QRG - 19




2.9Manufacturer's Standard | Alkyd Enamel | Alkyd Enamel

1.0 mils (max)


5.0 mils (min)

Coating System 2.2.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:


PRIMER

1.0 mil (min) DFTAmeron Amercoat 5405 • 327Carboline Carbocoat 139 • 240Devoe Devguard 4308 428Devoe Devguard 4348 • 340Hempel Coatings (USA), Inc. Hempalin Enamel 5214 410International Interlac 665 427PPG Industries 7-282 • 336Sherwin Williams Industrial Enamel B54Z Series 417Sherwin Williams Industrial Enamel VOC B54-Z Series • 309Sigma Coatings Sigmarine BTD 7238 345Tnemec Company Enduratone 23 341Tnemec Company Hi-Build Tneme-Gloss 2H 351

TIECOATAlkyd Enamel

2.0 - 3.0 mils DFT


TOPCOATAlkyd Enamel

2.0 - 3.0 mils DFT

QRG - 20




2.10Manufacturer's Standard | Silicone Acrylic

1.0 mils


2.5 mils (min)

Coating System 2.3



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:


PRIMER

1.0 mil (min) DFTAmeron Amercoat 874HS 420Carboline Thermoline 4900 564Dampney Company, Inc. Thurmalox 260C • 333Devoe HT-4 548Hempel Coatings (USA), Inc. 5694 415International Intertherm 875 562Jotun Paints Solvalitt 497PPG Industries 97-710 568Sherwin Williams Thermo-Cure B59A380 376Sigma Coatings Sigmaguard CSF Glassflake 7954* • 0


1.5 - 2.5 mils DFT

QRG - 21




2.11Manufacturer's Standard | High-Temperature Silicone

1.0 mils (max)


2.5 mils (min)




Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:


PRIMER

1.0 mil (min) DFT


Ameron PSX 892HS • 324Carboline Thermaline 4700 480Dampney Company, Inc. Thurmalox 230C* 360Devoe HT-12 572Hempel Coatings (USA), Inc. 5690 400Hempel Coatings (USA), Inc. 5691 586International Intertherm 50 495Jotun Paints Solvalitt 497PPG Industries 97-724 554Sherwin Williams Hi-Temp Aluminum 100-A-518 420Sherwin Williams Poly-Glass Laminate 939 Series/531-0-006 • 40Tnemec Company Silicone Aluminum 39-1061 587


1.5 - 2.5 mils DFT

QRG - 22




2.12Epoxy Mastic - Surface-Tolerant Primer | Polyamide Epoxy (Finish)

2.0 - 3.0 mils


8.0 mils (min)

Use this system.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



Ameron Amerlock 400 • 120Carboline Carboguard 890 • 214Devoe Devran 224HS • 212Hempel Coatings (USA), Inc. Hempadur 45880 • 215International Interseal 670 HS • 240Jotun Paints Jotamastic 87 • 196PPG Industries 97-145 • 128Sherwin Williams Dura-Plate 235 B67-235 Series B67/V235 • 272Sigma Coatings TCP 7476 • 224Tnemec Company Chembuild 135 • 133Tnemec Company S.T. Typoxy N27 • 300


Surface Tolerant

5.0 - 7.0 mils DFT

Ameron Amerlock 400 • 120Carboline Carboguard 890 • 214Devoe Devran 224HS • 212Hempel Coatings (USA), Inc. Hempadur 4520 400Hempel Coatings (USA), Inc. Hempadur 45880 • 215International Interseal 670 HS • 240Jotun Paints Penguard Topcoat 400PPG Industries Aquapon 97-130 373Sherwin Williams Sher-Tile B-67-200 Series/B67V200 • 175Sherwin Williams Tile-Clad II Plus B62-500 Series/B62V500 • 275Sigma Coatings CM II 7456 US • 300Tnemec Company Hi-Build Epoxoline 66 362Tnemec Company Hi-Build Epoxoline II N69 • 253


3.0 - 4.0 mils DFT

QRG - 23




2.12.1Epoxy Mastic - Surface-Tolerant Primer - Aluminum Color Only | Polyamide Epoxy (Finish)

2.0 - 3.0 mils


8.0 mils (min)

Use this system.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



Ameron Amerlock 400 AL • 120Carboline Carbomastic 15 • 88Devoe Bar-Rust 239 • 119Hempel Coatings (USA), Inc. Hempadur 45880-19870 • 215International Interseal 670 HS • 240Jotun Paints Jotamastic 87 AL • 110PPG Industries UC65372/UC65373 • 118Sherwin Williams Epoxy Mastic Aluminum II B62S100/BV100 • 171Sigma Coatings TCP Aluminum 7477 • 240Tnemec Company Chembuild 135-1243 • 133Tnemec Company S.T. Typoxy N27 • 300



5.0 - 7.0 mils DFT

Ameron Amerlock 400 • 120Carboline Carboguard 890 • 214Devoe Devran 224HS • 212Hempel Coatings (USA), Inc. Hempadur 4520 400Hempel Coatings (USA), Inc. Hempadur 45880 • 215International Interseal 670 HS • 240Jotun Paints Penguard Topcoat 400PPG Industries Aquapon 97-130 373Sherwin Williams Sher-Tile B-67-200 Series/B67V200 • 175Sherwin Williams Tile-Clad II Plus B62-500 Series/B62V500 • 275Sigma Coatings CM II 7456 US • 300Tnemec Company Hi-Build Epoxoline 66 362Tnemec Company Hi-Build Epoxoline II N69 • 253


3.0 - 4.0 mils DFT

QRG - 24




2.13Epoxy Mastic - Surface-Tolerant Primer | Polyamide Epoxy (High Build)

2.0 - 3.0 mils


10.0 mils (min)

Use this system.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



Ameron Amerlock 400 • 120Carboline Carboguard 890 • 214Devoe Bar-Rust 231 • 247Hempel Coatings (USA), Inc. Hempadur 45880 • 215International Interseal 670 HS • 240Jotun Paints Jotamastic 87 • 196PPG Industries 97-145 • 128Sherwin Williams Dura-Plate 235 B67-235 Series B67/V235 • 272Sigma Coatings TCP 7476 • 224Tnemec Company Chembuild 135 • 133


Surface Tolerant

5.0 - 7.0 mils DFT

Follow the manufacturer's instructions. Recognize that lower temperatures will require a longer cure.

Ameron Amerlock 400 • 120Carboline Carboguard 890 • 214Devoe Devran 224HS • 212Hempel Coatings (USA), Inc. Hempadur 4520 400Hempel Coatings (USA), Inc. Hempadur 45880 • 215International Interseal 670 HS • 240Jotun Paints Penguard Topcoat 400PPG Industries Aquapon 97-130 373Sherwin Williams Sher-Tile B-67-200 Series/B67V200 • 175Sigma Coatings CM II 7456 US • 300Tnemec Company S.T. Typoxy N27 • 300


High Build

5.0 - 7.0 mils DFT

QRG - 25




2.13.1Epoxy Mastic - Surface-Tolerant Primer - Aluminum Color Only | Polyamide Epoxy (High Build)

2.0 - 3.0 mils


10.0 mils (min)

Use this system.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:






5.0 - 7.0 mils DFT

Follow the manufacturer's instructions. Recognize that lower temperatures will require a longer cure.

Ameron Amerlock 400 • 120Carboline Carboguard 890 • 214Devoe Devran 224HS • 212Hempel Coatings (USA), Inc. Hempadur 4520 400Hempel Coatings (USA), Inc. Hempadur 45880 • 215International Interseal 670 HS • 240Jotun Paints Primastic • 238PPG Industries Aquapon 97-130 373Sherwin Williams Sher-Tile B-67-200 Series/B67V200 • 175Sigma Coatings CM II 7456 US • 300Tnemec Company S.T. Typoxy N27 • 300


High Build

5.0 - 7.0 mils DFT

QRG - 26




2.14Polyamide Epoxy | Polyamide Epoxy

1.5 - 2.5 mils


6.0 mils (min) (if applying both coats)

Use this system.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:


Ameron Amercoat 385 • 276Carboline Carboguard 893 • 195Devoe Devran 224HS • 212Hempel Coatings (USA), Inc. Hempadur 4520 400Hempel Coatings (USA), Inc. Hempadur 45880 • 215International Intergard270 • 95International Interseal 670 HS • 240Jotun Paints Jotamastic 87 • 196PPG Industries 97-145 • 128Sherwin Williams Recoatable Epoxy Primer B67R5/B67V5 • 295Sigma Coatings Sigmacover Primer II 7413US • 300Sigma Coatings Sigmarite PC Unicoat 5483 PC • 252Tnemec Company Hi-Build Epoxoline 66 362Tnemec Company Hi-Build Epoxoline II N69 • 253


3.0 - 4.0 mils DFT

Topcoat is required only where moisture will tend to collect under wet insulation (such as at insulation support rings).

Ameron Amercoat 385 • 276Carboline Carboguard 890 • 214Devoe Devran 224HS • 212Hempel Coatings (USA), Inc. Hempadur 4520 400Hempel Coatings (USA), Inc. Hempadur 45880 • 215International Intergard 401 • 64International Interseal 670 HS • 240Jotun Paints Penguard Topcoat 400PPG Industries 97-145 • 128Sherwin Williams Recoatable Epoxy Primer B67R5/B67V5 • 295Sigma Coatings CM II 7456 US • 300Tnemec Company Hi-Build Epoxoline 66 362Tnemec Company Hi-Build Epoxoline II N69 • 253


3.0 - 4.0 mils DFT

QRG - 27




2.15Epoxy Mastic - Surface-Tolerant Primer | Aliphatic Polyurethane

2.0 - 3.0 mils


7.0 mils (min)

Use this system.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



Ameron Amerlock 400 • 120Carboline Carboguard 890 • 214Devoe Devran 224HS • 212Hempel Coatings (USA), Inc. Hempadur 45880 • 215International Interseal 670 HS • 240Jotun Paints Jotamastic 87 • 196PPG Industries 97-145 • 128Sherwin Williams Dura-Plate 235 B67-235 Series B67/V235 • 272Sigma Coatings TCP 7476 • 224Tnemec Company Chembuild 135 • 133


Surface Tolerant

5.0 - 7.0 mils DFT

Respirators are strongly recommended when applying polyurethane.

Ameron Amercoat 450 Series • 335Carboline Carbothane 134 HG • 288Devoe Devthane 379 • 311Hempel Coatings (USA), Inc. 55 Series 372Hempel Coatings (USA), Inc. Hempathane 5595 • 332International Interthane 990 395International Interthane 990HS • 332Jotun Paints Hardtop HB • 256PPG Industries 95-812 • 241Sherwin Williams Hi-Solids Polyurethane B65-300 SeriesB65/ • 289Sigma Coatings Sigmadur HS Semigloss 7530 • 288Sigma Coatings Sigmadur Versafinish 5522 • 320Tnemec Company Endura-Shield 74 • 229Tnemec Company Endura-Shield 75 • 193

TOPCOATPolyurethane -

Aliphatic

2.0 - 3.0 mils DFT

QRG - 28




2.15.1Epoxy Mastic - Surface-Tolerant Primer - Aluminum Color Only | Aliphatic Polyurethane

2.0 - 3.0 mils


7.0 mils (min)

Use this system.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



Ameron Amerlock 400 AL • 120Carboline Carbomastic 15 • 88Devoe Devran 224 Aluminum • 212Hempel Coatings (USA), Inc. Hempadur 45880-19870 • 215International Interseal 670 HS • 240Jotun Paints Jotamastic 87 AL • 110PPG Industries 97-148 • 0Sherwin Williams Epoxy Mastic Aluminum II B62S100/BV100 • 171Sigma Coatings TCP Aluminum 7477 • 240Tnemec Company Chembuild 135-1243 • 133



5.0 - 7.0 mils DFT




Aliphatic

2.0 - 3.0 mils DFT

QRG - 29




3.1Self-Cured Inorganic Zinc | Polyamide Epoxy (High Build) | Aliphatic Polyurethane

1.5 - 2.5 mils


9.0 mils (min)

Coating System (CS) 3.5. After applying the tie-coat: (Repair any damage exposing bare metal with CS 3.5. Repair any damage to the inorganic zinc primer, as necessary, with CS 3.5 to maintain specified film thickness.) DO NOT APPLY the inorganic zinc primer on top of or overlapping the final two coats of CS 3.1.1.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:

Three-Component Systems


Ameron Dimetcote 9 491Ameron Dimetcote 9HS • 323Carboline Carbozinc 11 515Carboline Carbozinc 11 HS • 264Devoe Catha-Coat 304V • 336Hempel Coatings (USA), Inc. Galvosil 1568 • 320Hempel Coatings (USA), Inc. Galvosil 1578 520International Interzinc 22 490International Interzinc 22HS • 340Jotun Paints Resist 78 465PPG Industries Metalhide 1001 Primer 97-673/97-674 397Sherwin Williams Zinc Clad II B69V3/B69D11 462Sherwin Williams Zinc Clad II HS B69VZ1/B69VZ3/B69D11 • 312Sigma Coatings Silguard MC II 7551 US • 324Tnemec Company SpanPrime IOZ 356 397Tnemec Company Tneme-Zinc 90-96 • 323



2.0 - 3.0 mils DFT

Ameron Amercoat 385 • 276Carboline Carboguard 893 • 195Devoe Devran 224HS • 212Hempel Coatings (USA), Inc. Hempadur 4520 400Hempel Coatings (USA), Inc. Hempadur 45880 • 215International Intergard 475 HS • 175Jotun Paints Penguard Tiecoat 100 480PPG Industries 97-148 • 0Sherwin Williams Macropoxy 646 B58-600 Series/B68V600 • 235Sigma Coatings Sigmarite PC Unicoat 5483 PC • 252Tnemec Company Chembuild 135 • 133Tnemec Company S.T. Typoxy N27 • 300

TIECOATEpoxy - Polyamide

High Build

5.0 - 7.0 mils DFT

QRG - 30







Aliphatic

2.0 - 3.0 mils DFT

QRG - 31




3.1.1Self-Cured Inorganic Zinc | Polyamide Epoxy (High Build) | Aliphatic Polyurethane

1.0 - 3.0 mils


10.0 mils (min)

Coating System (CS) 3.5. After applying the tie-coat: (Repair any damage exposing bare metal with CS 3.5. Repair any damage to the inorganic zinc primer, as necessary, with CS 3.5 to maintain specified film thickness.) DO NOT APPLY the inorganic zinc primer on top of or overlapping the final two coats of CS 3.1.1.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



Ameron Dimetcote 21-5 • 0Carboline Carbozinc 11 WB • 0Devoe Catha-Coat 305 • 0Hempel Coatings (USA), Inc. Galvosil 1562 • 0International Interzinc 685 • 0Jotun Paints Jotacote 5 • 0Sherwin Williams Zinc Clad XI B69V11/B69D11 • 0Sigma Coatings Silguard SC 7550 • 0



3.0 - 4.0 mils DFT

Ameron Amercoat 385 • 276Carboline Carboguard 890 • 214Devoe Devran 224HS • 212Hempel Coatings (USA), Inc. Hempadur 4520 400Hempel Coatings (USA), Inc. Hempadur 45880 • 215International Intergard 475 HS • 175Jotun Paints Penguard HB 380Sherwin Williams Macropoxy 646 B58-600 Series/B68V600 • 235Sigma Coatings Sigmarite PC Unicoat 5483 PC • 252


High Build

5.0 - 7.0 mils DFT


Ameron Amercoat 450 Series • 335Carboline Carbothane 134 HG • 288Devoe Devthane 379 • 311Hempel Coatings (USA), Inc. 55 Series 372Hempel Coatings (USA), Inc. Hempathane 5595 • 332International Interthane 990HS • 332Jotun Paints Hardtop HB • 256Sherwin Williams Hi-Solids Polyurethane B65-300 SeriesB65/ • 289Sigma Coatings Sigmadur HS Semigloss 7530 • 288Sigma Coatings Sigmadur Versafinish 5522 • 320


Aliphatic

2.0 - 3.0 mils DFT

QRG - 32




3.2Zinc-Rich Epoxy | Polyamide Epoxy (High Build) | Aliphatic Polyurethane

1.5 - 2.5 mils

SSPC-SP5 (NACE No. 1) White metal blast finish.

10.0 mils (min)

Coating System 3.5



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:


Ameron Amercoat 68HS • 288Carboline Carbozinc 859 • 325Devoe Catha-Coat 302H • 282Hempel Coatings (USA), Inc. Hempadur 1736 • 337International Interzinc 280 • 100International Interzinc 52 • 336Jotun Paints Barrier • 294PPG Industries Aquapon Zinc Rich 97-670 403Sherwin Williams Zinc Clad IV B69A8/B69V8 • 308Sigma Coatings Sigmacover Zinc Primer II 7402 US • 312Tnemec Company Tneme-Zinc 90-97 • 320

PRIMEREpoxy - Zinc-Rich

3.0 - 4.0 mils DFT

Ameron Amercoat 385 • 276Carboline Carboguard 890 • 214Devoe Devran 224HS • 212Hempel Coatings (USA), Inc. Hempadur 4520 400Hempel Coatings (USA), Inc. Hempadur 45880 • 215International Intergard 401 • 64International Intergard 475 HS • 175Jotun Paints Penguard HB 380PPG Industries Aquapon 97-130 373Sherwin Williams Macropoxy 646 B58-600 Series/B68V600 • 235Sigma Coatings CM II 7456 US • 300Tnemec Company Chembuild 135 • 133Tnemec Company S.T. Typoxy N27 • 300


High Build

5.0 - 7.0 mils DFT




Aliphatic

2.0 - 3.0 mils DFT

QRG - 33




3.3Self-Cured Inorganic Zinc | Vinyl Tie-Coat | Vinyl (High Build) | Vinyl (High Build)

1.5 - 2.5 mils


13.0 mils (min)

Coating System 3.4. After applying the tie-coat over the inorganic zinc primer, repair any damage that exposes the base metal with Coating System 3.4. DO NOT APPLY inorganic zinc on top of (or overlapping) the final three coats of System 3.3.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:


Keep inorganic zinc silicate mixed, using agitated pot while applying. Use System 3.3.1 if you need a water-reducible primer.

Ameron Dimetcote 9 491Carboline Carbozinc 11 515Carboline Carbozinc 11 HS • 264Hempel Coatings (USA), Inc. Galvosil 1568 • 320Hempel Coatings (USA), Inc. Galvosil 1578 520Jotun Paints Resist 86 455PPG Industries Metalhide 1001 Primer 97-673/97-674 397



2.0 - 3.0 mils DFT

Ameron Amercoat 220 • 180Carboline Carbocrylic 3359 DTM • 60Hempel Coatings (USA), Inc. Hempanyl Primer 1606 685Jotun Paints Vinylguard Silvergray 88 531PPG Industries Vinyl Primer and 97-349 702

TIECOATVinyl

1.0 - 1.5 mils DFT

Ameron Amercoat 220 • 180Carboline Carbocrylic 3359 DTM • 60Hempel Coatings (USA), Inc. Hempanyl Hi-Build 4622 546Jotun Paints Pioner TC 565PPG Industries 97-350 Series 613

TOPCOAT #1Vinyl

High Build

5.0 - 7.0 mils DFTAmeron Amercoat 220 • 180Carboline Carbocrylic 3359 DTM • 60Hempel Coatings (USA), Inc. Hempanyl Hi-Build 4622 546PPG Industries 97-350 Series 613

TOPCOAT #2Vinyl

High Build

5.0 - 7.0 mils DFT

QRG - 34




3.3.1Self-Cured Inorganic Zinc | Vinyl Tie-Coat | Vinyl (High Build) | Vinyl (High Build)

1.0 - 3.0 mils


14.0 mils (min)

Coating System 3.4. After applying the tie-coat over the inorganic zinc primer, repair any damage that exposes the base metal with Coating System 3.4. DO NOT APPLY inorganic zinc on top of (or overlapping) the final three coats of System 3.3.1.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



Ameron Dimetcote 21-5 • 0Carboline Carbozinc 11 WB • 0



3.0 - 4.0 mils DFT

Ameron Amercoat 220 • 180Carboline Carbocrylic 3359 DTM • 60

TIECOATVinyl

2.0 - 3.0 mils DFTAmeron Amercoat 220 • 180Carboline Carbocrylic 3359 DTM • 60

TOPCOAT #1Vinyl

High Build

5.0 - 7.0 mils DFTAmeron Amercoat 220 • 180Carboline Carbocrylic 3359 DTM • 60

TOPCOAT #2Vinyl

High Build

5.0 - 7.0 mils DFT

QRG - 35




3.4Zinc-Rich Epoxy | Vinyl (High Build) | Vinyl (High Build)

1.5 - 2.5 mils


13.0 mils (min)

Use this system.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:


Ameron Amercoat 68HS • 288Carboline Carbozinc 859 • 325Jotun Paints Barrier • 294PPG Industries Aquapon Zinc Rich 97-670 403

PRIMEREpoxy - Zinc-Rich

3.0 - 4.0 mils DFTAmeron Amercoat 220 • 180Carboline Carbocrylic 3359 DTM • 60Jotun Paints Vinylguard Silvergray 88 531PPG Industries 97-350 Series 613

TIECOATVinyl

High Build

5.0 - 7.0 mils DFTAmeron Amercoat 220 • 180Carboline Carbocrylic 3359 DTM • 60Jotun Paints Pioner TC 565PPG Industries 97-350 Series 613

TOPCOATVinyl

High Build

5.0 - 7.0 mils DFT

QRG - 36




3.5Epoxy Mastic | Polyamide Epoxy (High Build) | Aliphatic Polyurethane

1.5 - 3.0 mils

SSPC-SP3 Power-brush finish. (Remove all loose paint and rust.)

12.0 mils (min)

Use this system.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



Ameron Amerlock 400 • 120Carboline Carboguard 890 • 214Devoe Devran 224HS • 212Hempel Coatings (USA), Inc. Hempadur 45880 • 215International Interseal 670 HS • 240Jotun Paints Jotamastic 87 • 196PPG Industries 97-145 • 128Sherwin Williams Dura-Plate 235 B67-235 Series B67/V235 • 272Sigma Coatings TCP 7476 • 224Tnemec Company Chembuild 135 • 133


Surface Tolerant

5.0 - 7.0 mils DFT

Ameron Amercoat 385 • 276Carboline Carboguard 890 • 214Devoe Devran 224HS • 212Hempel Coatings (USA), Inc. Hempadur 4520 400Hempel Coatings (USA), Inc. Hempadur 45880 • 215International Interseal 670 HS • 240Jotun Paints Penguard HB 380PPG Industries Aquapon 97-130 373Sherwin Williams Macropoxy 646 B58-600 Series/B68V600 • 235Sigma Coatings CM II 7456 US • 300Tnemec Company Chembuild 135 • 133Tnemec Company S.T. Typoxy N27 • 300


High Build

5.0 - 7.0 mils DFT




Aliphatic

2.0 - 3.0 mils DFT

Vendors of mechanical equipment normally have their own standard coatings and find it economically impractical to change to purchaser-specified systems such as this one. Chevron's specified system must be applied unless the vendor obtains written approval from Chevron to substitute another. The alternative is to accept the vendor's standard primer and then apply Coating System 3.7 (Manufacturer's Standard/Universal Primer/Polyamide Epoxy (High Build)/Aliphatic Polyurethane).

QRG - 37




3.5.1Epoxy Mastic - Aluminum Color Only | Polyamide Epoxy (High Build) | Aliphatic Polyurethane

2.0 - 3.0 mils


12.0 mils (min)

Use this system.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:






5.0 - 7.0 mils DFT

Ameron Amercoat 385 • 276Carboline Carboguard 890 • 214Devoe Devran 224HS • 212Hempel Coatings (USA), Inc. Hempadur 4520 400Hempel Coatings (USA), Inc. Hempadur 5540 • 285International Interseal 670 HS • 240Jotun Paints Penguard HB 380PPG Industries Aquapon 97-130 373Sherwin Williams Macropoxy 646 B58-600 Series/B68V600 • 235Sigma Coatings CM II 7456 US • 300Tnemec Company Chembuild 135 • 133Tnemec Company S.T. Typoxy N27 • 300


High Build

5.0 - 7.0 mils DFT




Aliphatic

2.0 - 3.0 mils DFT

Vendors of mechanical equipment normally have their own standard coatings and find it economically impractical to change to purchaser-specified systems such as this one. Chevron's specified system must be applied unless the vendor obtains written approval from Chevron to substitute another. The alternative is to accept the vendor's standard primer and then apply Coating System 3.7 (Manufacturer's Standard/Universal Primer/Polyamide Epoxy (High Build)/Aliphatic Polyurethane).

QRG - 38




3.7Manufacturer's Standard | Universal Primer | Polyamide Epoxy (High Build) | Aliphatic Polyurethane

1.5 - 3.0 mils


11.0 mils (min)

Use this system without reapplying manufacturer's standard primer.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:


Apply universal primer over manufacturer's standard primer; then apply tiecoat and topcoat.

PRIMER [Mfg's Standard]

2.0 - 3.0 mils DFT

Ameron Amercoat 180 • 312Carboline Carbocoat 150HG • 336Carboline Rustbond Penetrating Sealer • 24Devoe Devguard 4160 419Hempel Coatings (USA), Inc. Uni-Primer 1314 520International Interseal 670 HS • 240Jotun Paints Penguard HB 380PPG Industries 97-680 414Sherwin Williams Hi-Solids Alkyd Metal Primer B50NZ3 • 308Sherwin Williams Kem Kromik B50NZ6 415Sigma Coatings Sigmacover Primer II 7413US • 300Tnemec Company Chem-Prime HS 37H 348

PRIMERUniversal Primer

2.0 - 3.0 mils DFT

Ameron Amercoat 385 • 276Carboline Carboguard 890 • 214Devoe Devran 224HS • 212Hempel Coatings (USA), Inc. Hempadur 4520 400Hempel Coatings (USA), Inc. Hempadur 45880 • 215International Interseal 670 HS • 240Jotun Paints Penguard HB 380PPG Industries Aquapon 97-130 373Sherwin Williams Macropoxy 646 B58-600 Series/B68V600 • 235Sigma Coatings CM II 7456 US • 300Tnemec Company S.T. Typoxy N27 • 300


High Build

5.0 - 7.0 mils DFT




Aliphatic

2.0 - 3.0 mils DFT

QRG - 39




3.8Manufacturer's Standard | Universal Primer | Aliphatic Polyurethane

1.5 - 2.5 mils


6.0 mils (min)

Use this system without reapplying manufacturer's standard primer.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:


Apply universal primer over manufacturer's standard primer; then apply tiecoat and topcoat.

PRIMER [Mfg's Standard]

2.0 - 3.0 mils (min) DFT

Ameron Amercoat 180 • 312Carboline Carbocoat 150HG • 336Carboline Rustbond Penetrating Sealer • 24Devoe Devguard 4160 419Hempel Coatings (USA), Inc. Uni-Primer 1314 520International Interseal 670 HS • 240Jotun Paints Penguard HB 380PPG Industries 97-680 414Sherwin Williams Hi-Solids Alkyd Metal Primer B50NZ3 • 308Sherwin Williams Kem Kromik B50NZ6 415Sigma Coatings Sigmacover Primer II 7413US • 300Tnemec Company Chem-Prime HS 37H 348

PRIMERUniversal Primer

2.0 - 3.0 mils DFT


Ameron Amercoat 450 Series • 335Carboline Carbothane 134 HG • 288Devoe Devthane 379 • 311Hempel Coatings (USA), Inc. 55 Series 372Hempel Coatings (USA), Inc. Hempathane 5595 • 332International Interthane 990 395International Interthane 990HS • 332Jotun Paints Hardtop HB • 256PPG Industries 95-812 • 241Sherwin Williams Hi-Solids Polyurethane B65-300 SeriesB65/ • 289Sigma Coatings Sigmadur Versafinish 5522 • 320Tnemec Company Endura-Shield 74 • 229Tnemec Company Endura-Shield 75 • 193


Aliphatic

2.0 - 3.0 mils DFT

QRG - 40




4.1Splash Zone Coating - Sprayable

3.0 - 4.0 mils

SSPC-SP10 (NACE No. 2) Near-white finish.

Per manufacturer's recommendation.

Use this system for repairs before putting components in immersion service. After putting in service, use this system above the waterline and System 4.1.1 below the waterline.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:

Specialty Coating Systems

Ameron Tideguard 182 • 0Carboline Carboguard 1207 • 0Hempel Coatings (USA), Inc. Spray Guard 3549 • 0International Interzone 485 • 74Jotun Paints Marathon IQ GF • 30Sigma Coatings Armour Compound 7490 • 0

Splash Zone Coating

(Spray)

DFT per manufacturer's

recommendation.

QRG - 41




4.1.1Splash Zone Compound - Asbestos Free Rated to Cure Underwater

3.0 - 4.0 mils

SSPC-SP10 (NACE No. 2) Near-white finish.

125.0 mils (min)

After putting in service, use this system below the waterline and System 4.1 above the waterline.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:


Carboline Carboguard A-788 • 0Devoe Devclad 182 • 1International Interzone 485 • 74Jotun Paints Marathon IQ GF • 30Reliance Rel-Zone 7815 • 0

Splash Zone Coating

Asbestos Free (Trowel)

0.5 - 1.0 inch thick

QRG - 42




4.2Monel Sheath for Splash Zones

Not applicable

Grind steel surfaces to remove rust completely in areas where Monel is to be welded.

16 gage (0.062 inch)*

N/A



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:


Clad the specified portion of the splash zone with cold rolled, plain, unpolished, Monel sheathing per ASTM B-127. Weld the Monel sheathing continuously on all edges. Overlap all joints in the Monel sheathing by four inches. Require contractor to submit to Chevron for approval the shop drawings showing application details for Monel. Ensure full corrosion protection to the portion of the structure covered by Monel by requiring water-tight welds fasten Monel sheathing to steel members and Monel to Monel. Inspect all such welds with liquid-penetrant testing. Repair all defects exceeding those allowed in AWS D1.1 par. 9.25. Weld Monel to steel and Monel to Monel with only GMAW or GTAW processes using Monel filler metal conforming to AWS 5.14 class ERNi Cu-7. Qualify all weld procedures and welders working with Monel according to AWS D1.1 as for a fillet weld using a macroetch cross-section test. Recognize that Monel can tear if posed to mechanical damage. Heavier gage of Monel can provide some additional tear resistance, but not a substantial difference. Consider cost and handling before selecting heavier-gage Monel. *This is not DFT, this is Minimum Thickness.

QRG - 43




4.3Vulcanized Neoprene for Splash Zones

3.0 - 4.0 mils (max)


0.5- 1.0 inch*

N/A



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:


Ship sections to be coated to contractor's facility for application of vulcanized neoprene, unless otherwise approved in writing by Chevron.

Mark Tool Splashtron • 0Vulcanized Neoprene

0.5 - 1.0 inch thick

*This is not DFT, this is Minimum Thickness.

QRG - 44




4.4Polyamide Epoxy | Fireproofing | Polyamide Epoxy (High Build) | Aliphatic Polyurethane

1.5 - 2.5 mils


10.0 mils (min) plus fireproofing thickness

FIREPROOFING INTACT: Weathercoat and topcoat for touch-up. FIREPROOFING DAMAGED: Repair fireproofing; finish with weathercoat and topcoat. PRIMER DAMAGED: Touch up with polyamide epoxy primer; then apply remainder of system.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:


Where moisture will tend to collect under wet insulation (such as at insulation support rings) select Coating System 2.14.

Ameron Amercoat 385 • 276AOC Penguard Primer • 238Carboline Carboguard 893 • 195Devoe Devran 224HS • 212Hempel Coatings (USA), Inc. Hempadur 45880 • 215International Intercure 200 • 320International Intergard 251 390PPG Industries 97-145 • 128Sherwin Williams Recoatable Epoxy Primer B67R5/B67V5 • 295Sigma Coatings Sigmarite PC Unicoat 5483 PC • 252Tnemec Company S.T. Typoxy N27 • 300


3.0 - 4.0 mils DFT

Chevron specifies fireproofing type and thickness. See Chevron's Fire Protection Manual. Certain manufacturers require a tiecoat between the fireproofing and weathercoating. Before sandblasting, weld 12-gage steel studs to the steel to support the mesh reinforcement. Alternative reinforcing techniques may be acceptable; but they require prior written authorization from Chevron. Allow fireproofing to cure ten days at 70°F before applying weathercoat; lower temps require a longer cure. Apply weathercoat in two coats with the first thinned to penetrate, unless the manufacturer recommends a tiecoat instead.

FIREPROOFING

Ameron Amercoat 385 • 276Carboline Carboguard 890 • 214Devoe Devran 224HS • 212Hempel Coatings (USA), Inc. Hempadur 45880 • 215Hempel Coatings (USA), Inc. Hempadur 5540 • 285International Intergard 475 HS • 175Jotun Paints Penguard HB 380PPG Industries Aquapon 97-130 373Sherwin Williams Macropoxy 646 B58-600 Series/B68V600 • 235Sigma Coatings CM II 7456 US • 300Tnemec Company S.T. Typoxy N27 • 300


High Build

5.0 - 7.0 mils DFT




Aliphatic

2.0 - 3.0 mils DFT

QRG - 45




4.5Polyester Non-Skid | 20 - 30 Mesh Grit | Polyester Non-Skid

3.0 - 4.0 mils

SSPC-SP6 (NACE No. 3) Commercial blast finish; or SPPC-SP10 (NACE No. 2) Near-white finish (Depends on application. See appropriate COM-EF-68)

40.0 mils (min)

Use this system.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:


Must add sand.

Ceilcote Flakeline 211 or 212 • 0Dudick Protecto-Coat 500 • 250Glidden Glidflake 7500 • 250Hempel Coatings (USA), Inc. Polyester GF 35920 • 35International Interzone 2000 • 35Jotun Paints Baltoflake • 75PPG Industries 90000/90002 420Sherwin Williams Coroplate I 948-W-016/531-0-006 • 240

PRIMERPolyester Non-Skid

30.0 - 40.0 mils DFT

Apply grit to these coatings to provide a non-skid surface. Apply polyester first at 30 mils. Sprinkle Chevron-approved 20 - 30 mesh garnet, alumina, or other grit evenly over the coating at a rate of 15 - 18 lbs per 100 sq ft. Spray apply a final 10.0 mils of isopolyester over the grit while the first coat is still sticky.

TIECOAT

20 - 30 Mesh Grit

Must add sand.

Ceilcote Flakeline 211 or 212 • 0Dudick Protecto-Coat 500 • 250Glidden Glidflake 7500 • 250Hempel Coatings (USA), Inc. Polyester GF 35920 • 35International Interzone 2000 • 35Jotun Paints Baltoflake with Carborex 20 • 75PPG Industries 94701, VOC • 337Sherwin Williams Coroplate I 948-W-016/531-0-006 • 240

TOPCOATPolyester Non-Skid

10.0 - 15.0 mils DFT

QRG - 46




4.6Epoxy Non-Skid | Grit | Epoxy Non-Skid

3.0 - 4.0 mils

SSPC-SP6 (NACE No. 3) Commercial blast finish; or SPPC-SP10 (NACE No. 2) Near-white finish (Depends on application.)

20.0 - 25.0 mils (min)

Use this system.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:


Use coating supplier's recommendation.

PRIMER

Non-skid grit is supplied in coatings. Specify size of grit when ordering.

TIECOAT

Method of application (spray, roller, brush) depends on the coating supplier selected.

Ameron Amerlock 400-GFK w/888 Additive • 172Carboline Carboguard 1209 with grit • 96Devoe Devgrip 237C • 340Hempel Coatings (USA), Inc. Hempadur 350International Interzone 954 • 130Jotun Paints Primastic with 3883 Non-Skid aggregate • 238PPG Industries 97-145 • 128PPG Industries Aquapon High Build with Grit 373Sherwin Williams ArmorSeal 300 • 340Sigma Coatings SigmaGlaze 5492 • 0Tnemec Company Tneme-Glaze 280 • 2

TOPCOATEpoxy Non-Skid

20.0 - 25.0 mils DFT

Respirators are strongly recommended when applying polyurethane. An aliphatic polyurethane coating may be applied over the epoxy non-skid for markings or prevention of chalking.

Ameron Amercoat 450 Series • 335Carboline Carbothane 134 HG • 288Devoe Devthane 379 • 311Hempel Coatings (USA), Inc. 55 Series 372Hempel Coatings (USA), Inc. Hempathane 5595 • 332International Interthane 990 395International Interthane 990HS • 332Jotun Paints Hardtop HB • 256PPG Industries 95-812 • 241Sherwin Williams Hi-Solids Polyurethane B65-300 SeriesB65/ • 289Sigma Coatings Sigmadur HS Semigloss 7530 • 288Sigma Coatings Sigmadur Versafinish 5522 • 320Tnemec Company CRU 291 • 281

SECONDARY TOPCOAT

Polyurethane - Aliphatic

(Optional)

2.0 - 3.0 mils DFT

QRG - 47




8.1Nonreinforced Thin Film Coatings for Fresh-Water Immersion Service

2.0 - 3.0 mils

SSPC-SP5 (NACE No. 1) White metal surface.

10.0 mils (min) (see manufacturer's data sheets for min/max thickness per coat)

Use the same manufacturer's paint.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:

Non-Reinforced Thin Film Coatings for Immersion Service

These coatings are normally self-priming; but if a primer is required, use the chosen manufacturer's recommendation.

PRIMER

Sherwin Williams Tank Clad HS B62W80 120°F• 177Ameron Amercoat 90HS 140°F• 323Carboline Carboguard 890 140°F• 214Carboline Phenoline 310* 140°F• 12Hempel Coatings (USA), Inc. Hempadur 1763 140°F• 255International Interline 850 140°F• 225Sigma Coatings Sigmacover TCP 7476 140°F• 240PPG Industries 97-946 150°F• 262Devoe Bar-Rust 236 180°F• 170Jotun Paints Tankguard Storage 200°F• 323

FIRST COATEpoxy

Nonreinforced Thin Film

5.0 - 6.0 mils DFT typically

Sherwin Williams Tank Clad HS B62W80 120°F• 177Ameron Amercoat 90HS 140°F• 323Carboline Carboguard 890 140°F• 214Hempel Coatings (USA), Inc. Hempadur 1763 140°F• 255International Interline 850 140°F• 225Sigma Coatings Sigmacover TCP 7476 140°F• 240PPG Industries 97-946 150°F• 262Devoe Bar-Rust 236 180°F• 170Jotun Paints Tankguard Storage 200°F• 323

SECOND COATEpoxy



This list is limited to full-service national manufacturers. Local conditions may warrant adding local suppliers.* Designates single coat application, low temperature cure and application, and fast cure. Applied 20 -25 mils by Plural Component Equipment

QRG - 48




8.2Nonreinforced Thin Film Coatings for Demineralized Water or Condensate Immersion Service

2.0 - 3.0 mils






Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER

Tnemec Company Hi-Build Epoxoline II N69 120°F• 253Tnemec Company Tneme-Liner 61 120°F• 169Ameron Amercoat 90HS 140°F• 323Carboline Carboguard 890 140°F• 214Carboline Phenoline 310* 140°F• 12Hempel Coatings (USA), Inc. Hempadur 1550 140°F• 320International Interline 359 140°F• 320Sigma Coatings Sigmaguard EHB 7433 140°F• 252Carboline Phenoline 368 WG 180°F• 291Devoe Bar-Rust 236 180°F• 170PPG Industries 97-160 180°F• 150Sherwin Williams Phenicon HS 920-W-A11/700-C-685 180°F• 230Jotun Paints Tankguard Storage 200°F• 323Sigma Coatings Phenguard Primer 7409 212°F• 300

FIRST COATEpoxy



Tnemec Company Hi-Build Epoxoline II N69 120°F• 253Tnemec Company Tneme-Liner 61 120°F• 169Ameron Amercoat 90HS 140°F• 323Carboline Carboguard 890 140°F• 214Hempel Coatings (USA), Inc. Hempadur 1550 140°F• 320International Interline 359 140°F• 320Carboline Phenoline 368 WG 180°F• 291Devoe Bar-Rust 236 180°F• 170PPG Industries 97-160 180°F• 150Sherwin Williams Phenicon HS 920-W-A11/700-C-685 180°F• 230Jotun Paints Tankguard Storage 200°F• 323Sigma Coatings Sigmaguard EHB 7433 200°F• 252Sigma Coatings Phenguard Finish 7436 212°F• 300

SECOND COATEpoxy



If seam sealant or putty is required, use any of the following brands from the Acceptable Brands List: (Epoxy, Rivet and Seam Sealer (Spray or Trowel), Polysulfide Flexible Putty). This list is limited to full-service national manufacturers. Local conditions may warrant adding local suppliers. * Designates single coat application, low temperature cure and application, and fast cure. Applied 20 - 25 mils by Plural Component Equipment.

Sigma recommends that for temperatures above 140F, the Phenguard system is applied in three 4 mil coats (using Phenguard 7435 as the intermediate coat) rather than two 6mil coats.

QRG - 49




8.3Nonreinforced Thin Film Coatings for FDA-Approved Potable Water Immersion Service

2.0 - 3.0 mils






Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER

Ameron Amercoat 395 FD 120°F• 217Carboline Carboguard 891 120°F• 214Hempel Coatings (USA), Inc. Hempadur 3573 120°F• 82International Interline 850 120°F• 225Sherwin Williams Tank Clad HS B62W80 120°F• 177Sigma Coatings Sigmaguard HSV 5476 120°F• 156Tnemec Company Pota-Pox Plus N140 120°F• 274Devoe Bar-Rust 233 H 180°F• 170Jotun Paints Tankguard Aqua 180°F• 10PPG Industries 95-132 180°F• 304

FIRST COATEpoxy



Ameron Amercoat 395 FD 120°F• 217Carboline Carboguard 891 120°F• 214Hempel Coatings (USA), Inc. Hempadur 3573 120°F• 82International Interline 850 120°F• 225Sherwin Williams Tank Clad HS B62W80 120°F• 177Sigma Coatings Sigmaguard CSF 85 7785* 120°F• 5Sigma Coatings Sigmaguard HSV 5476 120°F• 156Tnemec Company Pota-Pox Plus N140 120°F• 274Devoe Bar-Rust 233 H 180°F• 170Jotun Paints Tankguard Aqua 180°F• 10PPG Industries 95-132 180°F• 304

SECOND COATEpoxy



If seam sealant or putty is required, use the coating manufacturer's recommended FDA-approved material. This list is limited to full-service national manufacturers. Local conditions may warrant adding local suppliers.

QRG - 50




8.4Nonreinforced Thin Film Coatings for Salt Water and Brine Immersion Service

2.0 - 3.0 mils






Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER

Sigma Coatings Sigmaguard EHB 7433 • 252Hempel Coatings (USA), Inc. Hempadur 1763 120°F• 255Jotun Paints Jotamastic 87 AL 120°F• 110Tnemec Company Hi-Build Epoxoline II N69 120°F• 253Tnemec Company Tneme-Liner 61 120°F• 169Ameron Amercoat 90HS 140°F• 323Carboline Carboguard 890 140°F• 214Carboline Phenoline 310* 140°F• 12International Interline 850 140°F• 225Devoe Bar-Rust 236 180°F• 170Sherwin Williams Phenicon HS 920-W-A11/700-C-685 180°F• 230Sigma Coatings Phenguard Primer 7409 212°F• 300

FIRST COATEpoxy



Sigma Coatings Sigmaguard EHB 7433 • 252Hempel Coatings (USA), Inc. Hempadur 1763 120°F• 255Jotun Paints Jotamastic 87 AL 120°F• 110Tnemec Company Hi-Build Epoxoline II N69 120°F• 253Tnemec Company Tneme-Liner 61 120°F• 169Ameron Amercoat 90HS 140°F• 323Carboline Carboguard 890 140°F• 214International Interline 850 140°F• 225PPG Industries 97-946 150°F• 262Devoe Bar-Rust 236 180°F• 170Sherwin Williams Phenicon HS 920-W-A11/700-C-685 180°F• 230Sigma Coatings Phenguard Finish 7436 212°F• 300

SECOND COATEpoxy



If seam sealant or putty is required, use any of the following brands from the Acceptable Brands List: (Epoxy, Rivet and Seam Sealer (Spray or Trowel), Polysulfide Flexible Putty). This list is limited to full-service national manufacturers. Local conditions may warrant adding local suppliers. * Designates single coat application, low temperature cure and application, and fast cure. Applied 20-25 mils by Plural Component Equipment.


QRG - 51




8.5Nonreinforced Thin Film Coatings for Produced-Water Immersion Service

2.0 - 3.0 mils






Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER

Hempel Coatings (USA), Inc. Hempadur 8567.1 120°F• 320Tnemec Company Hi-Build Epoxoline II N69 120°F• 253Tnemec Company Tneme-Liner 61 120°F• 169Ameron Amercoat 90HS 140°F• 323Carboline Carboguard 890 140°F• 214Carboline Phenoline 310* 140°F• 12International Interline 850 140°F• 225International Interseal 670 HS 140°F• 240PPG Industries 97-946 150°F• 262Devoe Devchem 253 180°F• 213Jotun Paints Tankguard Storage 180°F• 323Sherwin Williams Phenicon HS 920-W-A11/700-C-685 180°F• 230Sigma Coatings Sigmaguard EHB 7433 200°F• 252Sigma Coatings Phenguard Primer 7409 212°F• 300

FIRST COATEpoxy



Hempel Coatings (USA), Inc. Hempadur 8567.1 120°F• 320Tnemec Company Hi-Build Epoxoline II N69 120°F• 253Tnemec Company Tneme-Liner 61 120°F• 169Ameron Amercoat 90HS 140°F• 323Carboline Carboguard 890 140°F• 214International Interline 850 140°F• 225International Interseal 670 HS 140°F• 240PPG Industries 97-946 150°F• 262Devoe Devchem 253 180°F• 213Jotun Paints Tankguard Storage 180°F• 323Sherwin Williams Phenicon HS 920-W-A11/700-C-685 180°F• 230Sigma Coatings Sigmaguard EHB 7433 200°F• 252Sigma Coatings Phenguard Finish 7436 212°F• 300

SECOND COATEpoxy





QRG - 52




8.6Nonreinforced Thin Film Coatings for Crude Oil (Sweet or Sour) Immersion Service

2.0 - 3.0 mils






Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER

Hempel Coatings (USA), Inc. Hempadur 45880 120°F• 215Tnemec Company Hi-Build Epoxoline II N69 120°F• 253Tnemec Company Tneme-Liner 61 120°F• 169Ameron Amercoat 90HS 140°F• 323Carboline Phenoline 380* 140°F• 12International Interline 850 140°F• 225International Interseal 670 HS 140°F• 240Sherwin Williams Phenicon HS 920-W-A11/700-C-685 150°F• 230Carboline Phenoline 187 160°F• 312Devoe Bar-Rust 236 180°F• 170Jotun Paints Tankguard Storage 180°F• 323PPG Industries 97-160 180°F• 150Sigma Coatings Sigmaguard EHB 7433 200°F• 252Sigma Coatings Phenguard Primer 7409 212°F• 300

FIRST COATEpoxy



Hempel Coatings (USA), Inc. Hempadur 45880 120°F• 215Tnemec Company Hi-Build Epoxoline II N69 120°F• 253Tnemec Company Tneme-Liner 61 120°F• 169Ameron Amercoat 90HS 140°F• 323International Interline 850 140°F• 225International Interseal 670 HS 140°F• 240Carboline Phenoline 187 160°F• 312Devoe Bar-Rust 236 180°F• 170Jotun Paints Tankguard Storage 180°F• 323PPG Industries 97-160 180°F• 150Sigma Coatings Sigmaguard EHB 7433 200°F• 252Sigma Coatings Phenguard Finish 7436 212°F• 300

SECOND COATEpoxy





QRG - 53




8.7Nonreinforced Thin Film Coatings for Fuel (Low-Aromatic) Immersion Service

2.0 - 3.0 mils






Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER

Ameron Amercoat 395 FD 120°F• 217Carboline Phenoline 187 120°F• 312Hempel Coatings (USA), Inc. Hempadur 1763 120°F• 255International Interline 850 120°F• 225Sherwin Williams Phenicon HS 920-W-A11/700-C-685 120°F• 230Tnemec Company Tneme-Liner 61 120°F• 169Carboline Phenoline 310* 140°F• 12Sigma Coatings EHB 7433 140°F• 252Devoe Bar-Rust 236 180°F• 170Jotun Paints Tankguard Storage 180°F• 323PPG Industries 97-160 180°F• 150

FIRST COATEpoxy



Ameron Amercoat 395 FD 120°F• 217Carboline Phenoline 187 120°F• 312Hempel Coatings (USA), Inc. Hempadur 1763 120°F• 255International Interline 850 120°F• 225Sherwin Williams Phenicon HS 920-W-A11/700-C-685 120°F• 230Tnemec Company Tneme-Liner 61 120°F• 169Sigma Coatings Sigmaguard CSF 7443 140°F• 132Sigma Coatings EHB 7433 160°F• 252Devoe Bar-Rust 236 180°F• 170Jotun Paints Tankguard Storage 180°F• 323PPG Industries 97-160 180°F• 150

SECOND COATEpoxy




Sigmaguard CSF 7443 is a single coat product at 16-20 mils.

QRG - 54




8.8Nonreinforced Thin Film Coatings for Fuel (High-Aromatic) Immersion Service

2.0 - 3.0 mils






Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER

Ameron Amercoat 395 FD 120°F• 217Carboline Phenoline 187 120°F• 312Hempel Coatings (USA), Inc. Hempadur 1550 120°F• 320International Interline 850 120°F• 225Tnemec Company Tneme-Liner 61 120°F• 169Carboline Phenoline 380* 140°F• 12Sherwin Williams Phenicon HS 920-W-A11/700-C-685 140°F• 230Sigma Coatings Sigmaguard EHB 7433 140°F• 252Devoe Devchem 253 180°F• 213Jotun Paints Tankguard Storage 180°F• 323PPG Industries 97-160 180°F• 150

FIRST COATEpoxy



Ameron Amercoat 395 FD 120°F• 217Carboline Phenoline 187 120°F• 312Hempel Coatings (USA), Inc. Hempadur 1550 120°F• 320International Interline 850 120°F• 225Tnemec Company Tneme-Liner 61 120°F• 169Sherwin Williams Phenicon HS 920-W-A11/700-C-685 140°F• 230Sigma Coatings Sigmaguard CSF 7443 140°F• 132Sigma Coatings Sigmaguard EHB 7433 140°F• 252Devoe Devchem 253 180°F• 213Jotun Paints Tankguard Storage 180°F• 323PPG Industries 97-160 180°F• 150

SECOND COATEpoxy



If seam sealant or putty is required, use any of the following brands from the Acceptable Brands List: (Epoxy, Rivet and Seam Sealer (Spray or Trowel), Polysulfide Flexible Putty). This list is limited to full-service national manufacturers. Local conditions may warrant adding local suppliers. * Designates single coat application, low temperature cure and application, fast cure. Applied 20 - 25 mils by Plural Component Equipment.


QRG - 55




8.9Nonreinforced Thin Film Coatings for Aromatic-Hydrocarbon Immersion Service

2.0 - 3.0 mils






Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER

Ameron Amercoat 395 FD 120°F• 217Carboline Phenoline 373 120°F• 233Hempel Coatings (USA), Inc. Hempadur 1550 120°F• 320International Interline 850 120°F• 225Tnemec Company Tneme-Liner 61 120°F• 169Carboline Phenoline 380* 140°F• 12Sherwin Williams Phenicon HS 920-W-A11/700-C-685 140°F• 230Sigma Coatings Sigmaguard EHB 7433 140°F• 252Devoe Devchem 253 180°F• 213Jotun Paints Tankguard Storage 180°F• 323PPG Industries 97-160 180°F• 150

FIRST COATEpoxy



Ameron Amercoat 395 FD 120°F• 217Carboline Phenoline 373 120°F• 233Hempel Coatings (USA), Inc. Hempadur 1550 120°F• 320International Interline 850 120°F• 225Tnemec Company Tneme-Liner 61 120°F• 169Sherwin Williams Phenicon HS Flake Filled 920-R-A11/700-C 140°F• 230Sigma Coatings Sigmaguard CSF 7443 140°F• 132Sigma Coatings Sigmaguard EHB 7433 140°F• 252Devoe Devchem 253 180°F• 213Jotun Paints Tankguard Storage 180°F• 323PPG Industries 97-160 180°F• 150

SECOND COATEpoxy





QRG - 56




8.10Nonreinforced Thin Film Coatings for Acetone Immersion Service

1.5 - 2.5 mils






Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:


* These are special baked phenolic coatings: refer to manufacturer's data sheets.

Ameron Dimetcote 21-5 • 0Carboline Carbozinc 11 HS • 264Devoe Catha-Coat 305 • 0Hempel Coatings (USA), Inc. Galvosil 1562 • 0International Interzinc 22 490International Interzinc 22HS • 340Jotun Paints Resist GTI 458PPG Industries Metalhide 1001 Primer 97-673/97-674 397Sherwin Williams Zinc Clad II HS B69VZ1/B69VZ3/B69D11 • 312Sigma Coatings Silguard MC II 7551 US • 324Tnemec Company SpanPrime IOZ 356 397Tnemec Company Teneme-Zinc 90E-92 474

PRIMER



DO NOT USE seam sealer or putty in this service. For alternatives consult one of CRTC's coating specialists. This list is limited to full-service national manufacturers. Local conditions may warrant adding local suppliers. * Designates single coat application, low temperature cure and application, and fast cure. Applied 20 - 25 mils by Plural Component Equipment.

QRG - 57




8.11Nonreinforced Thin Film Coatings for Ethyl & Methyl Alcohol Immersion Service

2.0 - 3.0 mils






Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER

** Use 95-267 for ethanol service and 94301 in methanol.

PPG Industries 94301** • 335Carboline Carbozinc 11 HS 120°F• 264Hempel Coatings (USA), Inc. Hempadur 1550 120°F• 320International Interline 850 120°F• 225Sherwin Williams Phenicon HS 920-W-A11/700-C-685 120°F• 230Sigma Coatings Phenguard Primer 7409 120°F• 300Jotun Paints Resist GTI 140°F 458PPG Industries 95-267** 140°F• 336

FIRST COAT



PPG 95-267 and 94301 - only one coat needed for these materials.

Hempel Coatings (USA), Inc. Hempadur 1550 120°F• 320International Interline 850 120°F• 225Sherwin Williams Phenicon HS 920-W-A11/700-C-685 120°F• 230Sigma Coatings Phenguard Finish 7436 120°F• 300

SECOND COAT



DO NOT USE seam sealer or putty in this service. For alternatives consult one of CRTC's coating specialists. This list is limited to full-service national manufacturers. Local conditions may warrant adding local suppliers.

QRG - 58




9.1Reinforced Thick Film Coatings for Fresh-Water Immersion Service

3.0 - 4.0 mils


36.0 mils (min) (sprayable), 80.0 mils (min) (trowelable). (See manufacturers' data sheets for min/max thicknesses per coat)




Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:

Reinforced Thick Film Coatings for Immersion Service


PRIMER

Roll each coat of spray- or trowelable glass flake to orient the flakes parallel to the substrate. Some systems require a 10-mil wax coat of glass flake-free resin. (See manufacturers' data sheets for wax coat requirements.)

Ameron Amercoat 351 + 880 Additive 140°F• 0Dudick Protecto-Coat 900HT 140°F• 0International Interzone 1000 140°F• 85Sherwin Williams Coroplate I 948-W-016/531-0-006 140°F• 240Jotun Paints Marathon IQ GF 150°F• 30Devoe Devmat 110 180°F• 39Industrial Environmental Coa EC 376 F 180°F• 36Carboline Phenoline 1205 200°F• 255PPG Industries 94301, VOC 210°F• 334

FIRST COAT

Reinforced Glass Flake

18.0 - 20.0 mils DFT (sprayable) 40.0 mils

DFT (trowelable)


Ameron Amercoat 351 + 880 Additive 140°F• 0Dudick Protecto-Coat 900HT 140°F• 0International Interzone 1000 140°F• 85Sherwin Williams Coroplate I 948-W-016/531-0-006 140°F• 240Sigma Coatings Sigmaguard CSF Glassflake 7954* 140°F• 0Jotun Paints Marathon IQ GF 150°F• 30Devoe Devmat 110 180°F• 39Industrial Environmental Coa EC 376 F 180°F• 36Carboline Phenoline 1205 200°F• 255PPG Industries 94301, VOC 210°F• 334

SECOND COAT



DFT (trowelable)

If seam sealant or putty is required, use any of the following brands from the Acceptable Brands List: (Polyester, Isophthalic, Polysulfide Flexible Putty). This list is limited to full-service national manufacturers. Local conditions may warrant adding local suppliers.

QRG - 59




9.2Reinforced Thick Film Coatings for Demineralized Water or Condensate Immersion Service

3.0 - 4.0 mils






Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER


Sigma Coatings Sigmaguard CSF Glassflake 7954 120°F 612Ameron Amercoat 351 + 880 Additive 140°F• 0International Interline 955 140°F• 35Jotun Paints Marathon IQ GF 150°F• 30Devoe Devmat 110 180°F• 39Dudick Protecto-Flake 800 180°F• 0Industrial Environmental Coa EC 376 F 180°F• 36Sherwin Williams Cor-Cast TF-VE 180°F• 228Carboline Phenoline 1205 200°F• 255PPG Industries 94301, VOC 210°F• 334

FIRST COAT



DFT (trowelable)


Sigma Coatings Sigmaguard CSF Glassflake 7954 120°F 612Ameron Amercoat 351 + 880 Additive 140°F• 0International Interline 955 140°F• 35Jotun Paints Marathon IQ GF 150°F• 30Devoe Devmat 110 180°F• 39Dudick Protecto-Flake 800 180°F• 0Industrial Environmental Coa EC 376 F 180°F• 36Sherwin Williams Cor-Cast TF-VE 180°F• 228Carboline Phenoline 1205 200°F• 255PPG Industries 94301, VOC 210°F• 334

SECOND COAT



DFT (trowelable)

If seam sealant or putty is required, use any of the following brands from the Acceptable Brands List: (Vinyl Ester, Rivet and Seam Sealer (Trowel), Polysulfide Flexible Putty). This list is limited to full-service national manufacturers. Local conditions may warrant adding local suppliers.

QRG - 60




9.3Reinforced Thick Film Coatings for FDA-Approved Potable Water Immersion Service

3.0 - 4.0 mils






Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER


Sherwin Williams Cor-Cast TF-VE • 228Jotun Paints Baltoflake 120°F• 75Dudick Protecto-Coat 800 130°F• 0

FIRST COAT



DFT (trowelable)


Sherwin Williams Cor-Cast TF-VE • 228Jotun Paints Baltoflake 120°F• 75Dudick Protecto-Coat 800 130°F• 0

SECOND COAT



DFT (trowelable)


QRG - 61




9.4Reinforced Thick Film Coatings for Salt Water and Brine Immersion Service

3.0 - 4.0 mils






Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER


Sigma Coatings Sigmaguard CSF Glassflake 7954 120°F 612Dudick Protecto-Coat 900HT 140°F• 0International Interzone 1000 140°F• 85Jotun Paints Marathon IQ GF 150°F• 30Ameron Amercoat 351 + 880 Additive 160°F• 0Devoe Devmat 110 180°F• 39Dudick Protecto-Flake 800 180°F• 0Industrial Environmental Coa EC 376 F 180°F• 36Sherwin Williams Cor-Cast TF-VE 180°F• 228Carboline Phenoline 1205 190°F• 255PPG Industries 94301, VOC 210°F• 334

FIRST COAT



DFT (trowelable)


Sigma Coatings Sigmaguard CSF Glassflake 7954 120°F 612Dudick Protecto-Coat 900HT 140°F• 0International Interzone 1000 140°F• 85Jotun Paints Marathon IQ GF 150°F• 30Ameron Amercoat 351 + 880 Additive 160°F• 0Devoe Devmat 110 180°F• 39Dudick Protecto-Flake 800 180°F• 0Industrial Environmental Coa EC 376 F 180°F• 36Sherwin Williams Cor-Cast TF-VE 180°F• 228Carboline Phenoline 1205 200°F• 255PPG Industries 94301, VOC 210°F• 334

SECOND COAT



DFT (trowelable)


QRG - 62




9.5Reinforced Thick Film Coatings for Produced Water Immersion Service

3.0 - 4.0 mils






Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER


Ameron Amercoat 351 + 880 Additive 120°F• 0Sigma Coatings Sigmaguard CSF Glassflake 7954 120°F 612Dudick Protecto-Coat 900HT 150°F• 0International Interzone 1000 150°F• 85Jotun Paints Marathon IQ GF 150°F• 30Devoe Devmat 110 180°F• 39Industrial Environmental Coa EC 376 F 180°F• 36Carboline Phenoline 1205 200°F• 255Sherwin Williams Cor-Cote FC-VEN 200°F• 228PPG Industries 94301, VOC 210°F• 334

FIRST COAT



DFT (trowelable)


Ameron Amercoat 351 + 880 Additive 120°F• 0Sigma Coatings Sigmaguard CSF Glassflake 7954 120°F 612Dudick Protecto-Coat 900HT 150°F• 0International Interzone 1000 150°F• 85Jotun Paints Marathon IQ GF 150°F• 30Devoe Devmat 110 180°F• 39Industrial Environmental Coa EC 376 F 180°F• 36Carboline Phenoline 1205 190°F• 255Sherwin Williams Cor-Cote FC-VEN 200°F• 228PPG Industries 94301 210°F• 335

SECOND COAT



DFT (trowelable)


QRG - 63




9.6Reinforced Thick Film Coatings for Crude Oil (Sweet or Sour) Immersion Service

3.0 - 4.0 mils






Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER


Jotun Paints Marathon IQ GF 150°F• 30Sherwin Williams Cor-Cast TF-VE 160°F• 228Sigma Coatings Sigmaguard CSF Glassflake 7954 160°F 612Ameron Amercoat 351 + 880 Additive 180°F• 0Devoe Devmat 110 180°F• 39Dudick Protecto-Flake 800 180°F• 0Industrial Environmental Coa EC 376 F 180°F• 36International Interzone 1000 180°F• 85Carboline Phenoline 1205 200°F• 255PPG Industries 94301, VOC 210°F• 334

FIRST COAT



DFT (trowelable)


Jotun Paints Marathon IQ GF 150°F• 30Sherwin Williams Cor-Cast TF-VE 160°F• 228Sigma Coatings Sigmaguard CSF Glassflake 7954 160°F 612Ameron Amercoat 351 + 880 Additive 180°F• 0Devoe Devmat 110 180°F• 39Dudick Protecto-Flake 800 180°F• 0Industrial Environmental Coa EC 376 F 180°F• 36International Interzone 1000 180°F• 85Carboline Phenoline 1205 200°F• 255PPG Industries 94301, VOC 210°F• 334

SECOND COAT



DFT (trowelable)


QRG - 64




9.7Reinforced Thick Film Coatings for Fuel (Low Aromatic) Immersion Service

3.0 - 4.0 mils






Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER


PPG Industries 90000/90002 420Ameron Amercoat 351 + 880 Additive 120°F• 0Devoe Devmat 110 120°F• 39Dudick Protecto-Coat 800 120°F• 0International Interzone 1000 120°F• 85Sherwin Williams Cor-Cote FC-VE 120°F• 228Sigma Coatings Sigmaguard CSF Glassflake 7954 120°F 612Jotun Paints Marathon IQ GF 150°F• 30Industrial Environmental Coa EC 376 F 180°F• 36Carboline Phenoline 1205 200°F• 255

FIRST COAT



DFT (trowelable)


PPG Industries 94301 • 335Ameron Amercoat 351 + 880 Additive 120°F• 0Devoe Devmat 110 120°F• 39Dudick Protecto-Coat 800 120°F• 0International Interzone 1000 120°F• 85Sherwin Williams Cor-Cote FC-VE 120°F• 228Sigma Coatings Sigmaguard CSF Glassflake 7954 120°F 612Jotun Paints Marathon IQ GF 150°F• 30Industrial Environmental Coa EC 376 F 180°F• 36Carboline Phenoline 1205 200°F• 255

SECOND COAT



DFT (trowelable)


QRG - 65




9.8Reinforced Thick Film Coatings for Fuel (High Aromatic) Immersion Service

3.0 - 4.0 mils






Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER


Devoe Devmat 110 120°F• 39Dudick Protecto-Coat 800 120°F• 0International Interline 955 120°F• 35Sherwin Williams Cor-Cote FC-VE 120°F• 228Sigma Coatings Sigmaguard CSF Glassflake 7954 120°F 612Jotun Paints Marathon IQ GF 150°F• 30Industrial Environmental Coa EC 376 F 180°F• 36Carboline Phenoline 1205 200°F• 255PPG Industries 94301, VOC 210°F• 334

FIRST COAT



DFT (trowelable)


Devoe Devmat 110 120°F• 39Dudick Protecto-Coat 800 120°F• 0International Interline 955 120°F• 35Sherwin Williams Cor-Cote FC-VE 120°F• 228Sigma Coatings Sigmaguard CSF Glassflake 7954 120°F 612Jotun Paints Marathon IQ GF 150°F• 30Industrial Environmental Coa EC 376 F 180°F• 36Carboline Phenoline 1205 200°F• 255PPG Industries 94301, VOC 210°F• 334

SECOND COAT



DFT (trowelable)


QRG - 66




9.9Reinforced Thick Film Coatings for Aromatic Hydrocarbon Immersion Service

3.0 - 4.0 mils






Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER


Devoe Devmat 110 120°F• 39International Interline 955 120°F• 35Sherwin Williams Cor-Cote FC-VEN 120°F• 228Sigma Coatings Sigmaguard CSF Glassflake 7954 120°F 612Dudick Protecto-Coat 900 140°F• 0Jotun Paints Marathon IQ GF 150°F• 30Dudick Protecto-Coat 900HT 160°F• 0Industrial Environmental Coa EC 376 F 180°F• 36Carboline Phenoline 1205 200°F• 255PPG Industries 94301, VOC 210°F• 334

FIRST COAT



DFT (trowelable)


Devoe Devmat 110 120°F• 39International Interline 955 120°F• 35Sherwin Williams Cor-Cote FC-VEN 120°F• 228Sigma Coatings Sigmaguard CSF Glassflake 7954 120°F 612Dudick Protecto-Coat 900 140°F• 0Jotun Paints Marathon IQ GF 150°F• 30Dudick Protecto-Coat 900HT 160°F• 0Industrial Environmental Coa EC 376 F 180°F• 36Carboline Phenoline 1205 200°F• 255PPG Industries 94301, VOC 200°F• 334

SECOND COAT



DFT (trowelable)


QRG - 67




10.1Laminate-Reinforced Coatings for Fresh-Water Immersion Service

3.0 - 4.0 mils


120.0 mils (min)




Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:

Laminate Reinforced Coatings for Immersion Service


PRIMER

Alternate layers of resin and 1.5 oz glass mat to build 100.0 mils of laminate. Glass-to-resin ratio in the laminate should be 25/75.

AOC Vipel F701 • 0AOC Vipel F737 • 0Ashland Chemical Aropol 7241-15 140°F• 0Devoe Devmat 110 140°F• 39Dudick Protecto-Coat 600 140°F• 0International Interline 985 140°F• 0Reichold Dion Iso 6631T 140°F• 0Sherwin Williams Poly-Glass Laminate 939 Series/531-0-006 140°F• 40Sigma Coatings Novaguard 7453 160°F• 25PPG Industries 92338 210°F• 317

LAMINATE RESIN

Laminate

100.0 mils DFT

Apply surface veil and resin to laminate to build 10.0 mil tiecoat.

AOC Vipel F701 • 0AOC Vipel F737 • 0Ashland Chemical Aropol 7241-15 140°F• 0Devoe Devmat 110 140°F• 39Dudick Protecto-Coat 600 140°F• 0International Interline 985 140°F• 0Reichold Dion Iso 6631T 140°F• 0Sherwin Williams Poly-Glass Laminate 939 Series/531-0-006 140°F• 40PPG Industries 94201 210°F• 188

TIECOAT RESIN

Laminate

10.0 mils DFT

Apply 10-mil-thick wax coat (resin mixed with wax) as a topcoat. See manufacturers' data sheets for resin-to-wax ratio.

AOC Vipel F701 • 0AOC Vipel F737 • 0Ashland Chemical Aropol 7241-15 140°F• 0Devoe Devmat 110 140°F• 39Dudick Protecto-Coat 600 140°F• 0International Interline 985 140°F• 0Reichold Dion Iso 6631T 140°F• 0Sherwin Williams Poly-Glass Laminate 939 Series/531-0-006 140°F• 40Sigma Coatings Novaguard 7453 160°F• 25PPG Industries 94201 210°F• 188

TOPCOAT RESIN

Laminate

10.0 mils DFT


Sigma Novoguard 7453 is a 2 coat system.

QRG - 68




10.2Laminate-Reinforced Coatings for Demineralized-Water or Condensate Immersion Service

3.0 - 4.0 mils


120.0 mils (min)




Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER


AOC Vipel F010 • 0Ceilcote Lining 74 160°F• 0Sigma Coatings Novaguard 7453 160°F• 25Ashland Chemical Hetron 922 180°F• 0Devoe Devmat 110 180°F• 39Dudick Protecto-Coat 800 180°F• 0International Interline 995 180°F• 0PPG Industries 92338 180°F• 317Reichold Atlac 580 180°F• 0Sherwin Williams Magnaplate VE Laminate 939X465/531-0-0 180°F• 40

LAMINATE RESIN

Laminate

100.0 mils DFT


AOC Vipel F010 • 0Ceilcote Lining 74 160°F• 0Ashland Chemical Hetron 922 180°F• 0Devoe Devmat 110 180°F• 39Dudick Protecto-Coat 800 180°F• 0International Interline 995 180°F• 0PPG Industries 94201 180°F• 188Reichold Atlac 580 180°F• 0Sherwin Williams Magnaplate VE Laminate 939X465/531-0-0 180°F• 40

TIECOAT RESIN

Laminate

10.0 mils DFT


AOC Vipel F010 • 0Ceilcote Lining 74 160°F• 0Sigma Coatings Novaguard 7453 160°F• 25Ashland Chemical Hetron 922 180°F• 0Devoe Devmat 110 180°F• 39Dudick Protecto-Coat 800 180°F• 0International Interline 995 180°F• 0PPG Industries 94201 180°F• 188Reichold Atlac 580 180°F• 0Sherwin Williams Magnaplate VE Laminate 939X465/531-0-0 180°F• 40

TOPCOAT RESIN

Laminate

10.0 mils DFT



QRG - 69




10.4Laminate-Reinforced Coatings for Salt Water and Brine Immersion Service

3.0 - 4.0 mils


120.0 mils (min)




Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER


AOC Vipel F010 • 0Sigma Coatings Novaguard 7453 160°F• 25Ashland Chemical Hetron 922 180°F• 0Devoe Devmat 110 180°F• 39Dudick Protecto-Coat 800 180°F• 0International Interline 985 180°F• 0Reichold Atlac 580 180°F• 0Sherwin Williams Magnaplate VE Laminate 939X465/531-0-0 180°F• 40PPG Industries 92338 210°F• 317

LAMINATE RESIN

Laminate

100.0 mils DFT


AOC Vipel F010 • 0Ashland Chemical Hetron 922 180°F• 0Devoe Devmat 110 180°F• 39Dudick Protecto-Coat 800 180°F• 0International Interline 985 180°F• 0Reichold Atlac 580 180°F• 0Sherwin Williams Magnaplate VE Laminate 939X465/531-0-0 180°F• 40PPG Industries 94201 210°F• 188

TIECOAT RESIN

Laminate

10.0 mils DFT


AOC Vipel F010 • 0Ashland Chemical Hetron 922 180°F• 0Devoe Devmat 110 180°F• 39Dudick Protecto-Coat 800 180°F• 0International Interline 985 180°F• 0Reichold Atlac 580 180°F• 0Sherwin Williams Magnaplate VE Laminate 939X465/531-0-0 180°F• 40Sigma Coatings Novaguard 7453 180°F• 25PPG Industries 94201 210°F• 188

TOPCOAT RESIN

Laminate

10.0 mils DFT



QRG - 70




10.5Laminate-Reinforced Coatings for Produced-Water Immersion Service

3.0 - 4.0 mils


120.0 mils (min)




Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER


AOC Vipel F010 • 0Ashland Chemical Hetron 922 160°F• 0Ceilcote Lining 74 160°F• 0Devoe Devmat 110 160°F• 39Dudick Protecto-Coat 800 160°F• 0International Interline 985 160°F• 0Reichold Atlac 580 160°F• 0Sherwin Williams Magnaplate VE Laminate 939X465/531-0-0 160°F• 40Sigma Coatings Novaguard 7453 160°F• 25PPG Industries 92338 180°F• 317

LAMINATE RESIN

Laminate

100.0 mils DFT


AOC Vipel F010 • 0Ashland Chemical Hetron 922 160°F• 0Ceilcote Lining 74 160°F• 0Devoe Devmat 110 160°F• 39Dudick Protecto-Coat 800 160°F• 0International Interline 985 160°F• 0Reichold Atlac 580 160°F• 0Sherwin Williams Magnaplate VE Laminate 939X465/531-0-0 160°F• 40PPG Industries 94201 180°F• 188

TIECOAT RESIN

Laminate

10.0 mils DFT


AOC Vipel F010 • 0Ashland Chemical Hetron 922 160°F• 0Ceilcote Lining 74 160°F• 0Devoe Devmat 110 160°F• 39Dudick Protecto-Coat 800 160°F• 0International Interline 985 160°F• 0Reichold Atlac 580 160°F• 0Sherwin Williams Magnaplate VE Laminate 939X465/531-0-0 160°F• 40PPG Industries 92338 180°F• 317Sigma Coatings Novaguard 7453 180°F• 25

TOPCOAT RESIN

Laminate

10.0 mils DFT



QRG - 71




10.6Laminate-Reinforced Coatings for Crude-Oil (Sweet or Sour) Immersion Service

3.0 - 4.0 mils


120.0 mils (min)




Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER



LAMINATE RESIN

Laminate

100.0 mils DFT


AOC Vipel F010 • 0Ashland Chemical Hetron 922 180°F• 0Devoe Devmat 110 180°F• 39Dudick Protecto-Coat 800 180°F• 0International Interline 985 180°F• 0Reichold Atlac 580 180°F• 0Sherwin Williams Magnaplate VE Laminate 939X465/531-0-0 180°F• 40PPG Industries 94201 250°F• 188

TIECOAT RESIN

Laminate

10.0 mils DFT



TOPCOAT RESIN

Laminate

10.0 mils DFT



QRG - 72




10.7Laminate-Reinforced Coatings for Fuel (Low Aromatic) Immersion Service

3.0 - 4.0 mils


120.0 mils (min)




Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER



LAMINATE RESIN

Laminate

100.0 mils DFT


AOC Vipel F010 • 0Ashland Chemical Hetron 922 120°F• 0Ceilcote Lining 74 120°F• 0Devoe Devmat 110 120°F• 39Dudick Protecto-Coat 800 120°F• 0International Interline 910 120°F• 0Reichold Atlac 580 120°F• 0Sherwin Williams Magnaplate VE Laminate 939X465/531-0-0 120°F• 40PPG Industries 94201 250°F• 188

TIECOAT RESIN

Laminate

10.0 mils DFT



TOPCOAT RESIN

Laminate

10.0 mils DFT


QRG - 73




10.8Laminate-Reinforced Coatings for Fuel (High Aromatic) Immersion Service

3.0 - 4.0 mils


120.0 mils (min)




Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER


AOC Vipel F010 • 0Ashland Chemical Hetron 922 120°F• 0Ceilcote Lining 74 120°F• 0Devoe Devmat 110 120°F• 39Dudick Protecto-Coat 800 120°F• 0International Interline 995 120°F• 0Sherwin Williams Magnaplate VE Laminate 939X465/531-0-0 120°F• 40Sigma Coatings Novaguard 7453 140°F• 25PPG Industries 92338 80°F• 317

LAMINATE RESIN

Laminate

100.0 mils DFT


AOC Vipel F010 • 0Ashland Chemical Hetron 922 120°F• 0Ceilcote Lining 74 120°F• 0Devoe Devmat 110 120°F• 39Dudick Protecto-Coat 800 120°F• 0International Interline 995 120°F• 0Sherwin Williams Magnaplate VE Laminate 939X465/531-0-0 120°F• 40PPG Industries 92338 80°F• 317

TIECOAT RESIN

Laminate

10.0 mils DFT



TOPCOAT RESIN

Laminate

10.0 mils DFT



QRG - 74




10.9Laminate-Reinforced Coatings for Aromatic Hydrocarbon Immersion Service

3.0 - 4.0 mils


120.0 mils (min)




Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER



LAMINATE RESIN

Laminate

100.0 mils DFT


AOC Vipel F010 • 0Ashland Chemical Hetron 922 120°F• 0Ceilcote Lining 74 120°F• 0Devoe Devmat 110 120°F• 39Dudick Protecto-Coat 800 120°F• 0International Interline 995 120°F• 0Sherwin Williams Magnaplate VE Laminate 939X465/531-0-0 120°F• 40PPG Industries 94201 250°F• 188

TIECOAT RESIN

Laminate

10.0 mils DFT



TOPCOAT RESIN

Laminate

10.0 mils DFT



QRG - 75




11.2Demineralized Water or Condensate Coatings Resistant to Temperature Gradients of 50°F & Compatible with Cathodic Protection

2.0 - 3.0 mils






Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:

High-Temperature/High-Pressure Coating Systems


PRIMER

Carboline Phenoline 1205 180°F• 255Hempel Coatings (USA), Inc. Hempadur 1550 180°F• 320Sigma Coatings Phenguard Primer 7409 180°F• 300

FIRST COATEpoxy - Phenolic

5.0 - 6.0 mils DFTCarboline Phenoline 1205 180°F• 255Hempel Coatings (USA), Inc. Hempadur 1550 180°F• 320Sigma Coatings Phenguard Finish 7436 180°F• 300

SECOND COATEpoxy - Phenolic

5.0 - 6.0 mils DFT

TEMPERATURE GRADIENT refers to the difference between the stock temperature and the outside temperature of the steel shell. Example: an insulated tank would have 0°F temperature gradient. This list is limited to full-service national manufacturers. Local conditions may warrant adding local suppliers.


QRG - 76




11.2.1Demineralized Water or Condensate Coatings Resistant to Temperature Gradients of 50°F & Incompatible with Cathodic Protection

2.0 - 3.0 mils






Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER

Carboline Phenoline 368 WG 180°F• 291Sigma Coatings Phenguard Primer 7409 180°F• 300Ameron Amercoat 91 200°F 410


5.0 - 6.0 mils DFTCarboline Phenoline 368 WG 180°F• 291Sigma Coatings Phenguard Finish 7436 180°F• 300Ameron Amercoat 91 200°F 410


5.0 - 6.0 mils DFT


The Sigma system (also listed in 11.2) will function with or without cathodic protection.

QRG - 77




11.4Salt Water & Brine Service Coatings Resistant to Temperature Gradients of 50°F & Compatible with Cathodic Protection

2.0 - 3.0 mils






Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER





5.0 - 6.0 mils DFT



QRG - 78




11.4.1Salt Water & Brine Service Coatings Resistant to Temperature Gradients of 50°F & Incompatible with Cathodic Protection

2.0 - 3.0 mils






Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER





5.0 - 6.0 mils DFT



QRG - 79




11.4.2Salt Water & Brine High Temperature/High Pressure Service* Coatings Resistant to Temperatures to 180°F, Pressures of 1000 PSI & Incompatible with Cathodic Protection

2.0 - 3.0 mils






Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER

Carboline Phenoline 368 WG 180°F• 291Ameron Amercoat 91 200°F 410Sigma Coatings Phenguard Primer 7409 212°F• 300


5.0 - 6.0 mils DFTCarboline Phenoline 368 WG 180°F• 291Ameron Amercoat 91 200°F 410Sigma Coatings Phenguard Finish 7436 212°F• 300


5.0 - 6.0 mils DFT

* As in high-pressure separators. This list is limited to full-service national manufacturers. Local conditions may warrant adding local suppliers.



QRG - 80




11.5Produced Water Service Coatings Resistant to Temperature Gradients of 50°F & Compatible with Cathodic Protection

2.0 - 3.0 mils






Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER





5.0 - 6.0 mils DFT



QRG - 81




11.5.1Produced Water Service Coatings Resistant to Temperature Gradients of 50°F & Incompatible with Cathodic Protection

2.0 - 3.0 mils






Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER





5.0 - 6.0 mils DFT



QRG - 82




11.5.2Produced Water High Temperature/High Pressure Service Coatings* Resistant to Temperatures to 180°F, Pressures of 1000 PSI & Incompatible with Cathodic Protection

2.0 - 3.0 mils






Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER





5.0 - 6.0 mils DFT



QRG - 83




11.6Crude Oil Service (Sweet or Sour) Coatings Resistant to Temperature Gradients of 50°F & Compatible with Cathodic Protection

2.0 - 3.0 mils






Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER





5.0 - 6.0 mils DFT



QRG - 84




11.6.1Crude Oil Service (Sweet or Sour) Coatings Resistant to Temperature Gradients of 50°F & Incompatible with Cathodic Protection

2.0 - 3.0 mils






Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER





5.0 - 6.0 mils DFT




QRG - 85




11.6.2Crude Oil (Sweet or Sour) High Temperature/High Pressure Service Coatings* Resistant to Temperatures to 180°F, Pressures of 1000 PSI & Incompatible with

2.0 - 3.0 mils






Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



PRIMER





5.0 - 6.0 mils DFT




QRG - 86




12.1Under Insulation & Fireproofing - Non-Reinforced Thin Film Epoxy Coatings for Continuous or Cyclic Carbon Steel Temperatures -50°F to 450°F

2.0 - 3.0 mils


10.0 mils (min)

Use material from manufacturer.



Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:

Coatings under Insulation & Fireproofing

These coatings contain epoxy and epoxy phenolic resins.

Hempel Coatings (USA), Inc. Hempadur 1554 • 325Sigma Coatings Phenguard Primer 7409 250°F• 300Sigma Coatings Sigmacover CM Miocoat II 7427US 250°F• 324Sherwin Williams Epo-Phen B62A55/B62V55 300°F• 264International Intertherm 228 392°F• 326Ameron Amercoat 90HS w/880 Additive 400°F• 323Devoe HT-403 400°F• 217PPG Industries 97-946 400°F• 262Carboline Thermoline 450 425°F• 255Dampney Company, Inc. Thurmalox 215 450°F• 274

PRIMEREpoxy - Phenolic


5.0 - 7.0 mils DFT


Hempel Coatings (USA), Inc. Hempadur 1554 • 325Sigma Coatings Phenguard Finish 7436 250°F• 300Sigma Coatings Sigmacover CM Miocoat II 7427US 250°F• 324Sherwin Williams Epo-Phen B62A55/B62V55 300°F• 264International Intertherm 228 392°F• 326Ameron Amercoat 90HS w/880 Additive 400°F• 323Devoe HT-403 400°F• 217PPG Industries 97-946 400°F• 262Carboline Thermoline 450 425°F• 255Dampney Company, Inc. Thurmalox 216 450°F• 321

TOPCOATEpoxy - Phenolic


5.0 - 7.0 mils DFT

Sigma recommends CM Miocoat II at lower temperatures due to it's increased flexibility.

QRG - 87




12.4Under Insulation & Fireproofing - Non-Reinforced Thin Film Epoxy Coatings for Continuous or Cyclic Stainless Steel Temperatures -50°F to 450°F

1.0 - 2.0 mils

SSPC-SP7 (NACE No. 4) Solvent wipe and brush blast.

10.0 mils (min)




Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:



Hempel Coatings (USA), Inc. Hempadur 1530 417Sigma Coatings Sigmacover CM Miocoat II 7427US 250°F• 324Sherwin Williams Epo-Phen B62A55/B62V55 300°F• 264International Intertherm 228 392°F• 326Ameron Amercoat 90HS w/880 Additive 400°F• 323Devoe HT-403 400°F• 217PPG Industries 97-946 400°F• 262Carboline Thermoline 450 425°F• 255Dampney Company, Inc. Thurmalox 215 450°F• 274

PRIMEREpoxy - Phenolic


5.0 - 7.0 mils DFT


Hempel Coatings (USA), Inc. Hempadur 1530 417Sigma Coatings Sigmacover CM Miocoat II 7427US 250°F• 324Sherwin Williams Epo-Phen B62A55/B62V55 300°F• 264International Intertherm 228 392°F• 326Ameron Amercoat 90HS w/880 Additive 400°F• 323Devoe HT-403 400°F• 217PPG Industries 97-946 400°F• 262Carboline Thermoline 450 425°F• 255Dampney Company, Inc. Thurmalox 216 450°F• 321

TOPCOATEpoxy - Phenolic


5.0 - 7.0 mils DFT

Sigma recommends CM Miocoat II at lower temperatures due to it's increased flexibility.

QRG - 88




12.7Under Insulation & Fireproofing - Non-Reinforced Thin Film Inorganic Coatings for Carbon Steel or Stainless Steel Temperatures Above 450°F

1.0 - 2.0 mils

Stainless Steel: SSPC-SP7 (NACE No. 4) Solvent wipe and brush blast. Carbon Steel: SSPC-SP10 (Nace #2) Near-white metal blast

10.0 mils (min)




Anchor Pattern:

Surface Prep:

Total DFT:

Touch Up:


Ameron 738 is not suitable for services that have frequent thermal cycles. Cracking of the coating in this service has been documented.

Ameron PSX 738 1000°F• 96Dampney Company, Inc. Thurmalox 225HB 1000°F• 336PPG Industries Pitt-Therm 97-724 850°F• 0

PRIMERPolysiloxane Resin -

Inorganic Coating


5.0 - 7.0 mils DFT

Ameron 738 is not suitable for services that have frequent thermal cycles. Cracking of the coating in this service has been documented.

Ameron PSX 738 1000°F• 96Dampney Company, Inc. Thurmalox 225HB 1000°F• 336PPG Industries Pitt-Therm 97-724 850°F• 0

TOPCOATPolysiloxane Resin -

Inorganic Coating


5.0 - 7.0 mils DFT

QRG - 89




20.1Epoxy Coatings for Concrete: Service Temperatures <140°F, Moderate Physical Abuse, Intermittent & Continuous Exposure

Not applicable

Follow manufacturer's recommendation.

Varies with manufacturer.

Manufacturer's Recommendation




Total DFT:

Touch Up:

Concrete Coatings

Ameron Amercoat 351 • 0Carboline Phenoline 309 • 0Dudick Protecto-Line 100 • 0Jotun Paints Tankguard Storage • 323Koch Corrosion Control Co. AEP 20 • 0Master Builders, Inc Flakeline 680 • 0Sauereisen FibreCrete 204 • 16Sigma Coatings Penetrating Sealer SF 8353 • 48Sika Corporation Sikagard 62 • 0Stonhard, Inc. Stonchem 502 • 0


Thickness varies with manufacturer.

Ameron Amercoat 351 • 0Carboline Phenoline 309 • 0Dudick Protecto-Line 100 • 0Jotun Paints Tankguard Storage • 323Koch Corrosion Control Co. AEP 20 • 0Master Builders, Inc Flakeline 680 • 0Sauereisen FibreCrete 204 • 16Sigma Coatings Armour Compound 7490 • 0Sika Corporation Sikagard 62 • 0Stonhard, Inc. Stonchem 502 • 0

TOPCOATEpoxy - Amine Adduct


This coating system is NOT a substitute for a coating manufacturer's recommendation. REINFORCING: Continuous Exposure (Use a flake- or textile-reinforced system to resist physical abuse. Review the resin selection (probably polyester, epoxy, or modified urethane) with the coating manufacturer to ensure it is resistant to the corrosive media.); Intermittent Exposure (Use a thin film or elastomeric system. Review the resin selection (probably epoxy or modified urethane resin) with the coating manufacturer to ensure it is resistant to the corrosive media.); General (Ask the coating manufacturer to recommend reinforcing material (aggregate, mortar topping, chopped glass, or glass mat) not only to withstand moderate physical abuse, but also, where necessary, to reduce the probability of cracks developing in the coating and allowing product to leak.) In some cases, additional coats of material may be necessary to prepare the concrete surface for the coating system.

QRG - 90




20.2Epoxy Coatings for Concrete: Service Temperatures <140°F, Mild Physical Abuse, Intermittent & Continuous Exposure

Not applicable







Total DFT:

Touch Up:

Concrete Coatings

Ameron Amerlock 400/2 w/800 Additive • 0Dudick Protecto-Line 100 • 0Jotun Paints Tankguard Storage • 323Koch Corrosion Control Co. AEP 20 • 0Master Builders, Inc Ceilguard 663 • 0Sauereisen ConoGlaze 202 • 15Sigma Coatings Penetrating Sealer SF 8353 • 48Sika Corporation Sikagard 62 • 0Stonhard, Inc. Stonchem 501 • 0



Ameron Amerlock 400/2 w/800 Additive • 0Dudick Protecto-Line 100 • 0Jotun Paints Tankguard Storage • 323Koch Corrosion Control Co. AEP 20 • 0Master Builders, Inc Ceilguard 663 • 0Sauereisen ConoGlaze 202 • 15Sigma Coatings Novoshield 7744 • 13Sika Corporation Sikagard 62 • 0Stonhard, Inc. Stonchem 501 • 0



This coating system is NOT a substitute for a coating manufacturer's recommendation. REINFORCING: Continuous Exposure (Use a flake- or textile-reinforced system to resist physical abuse and for immersion service. Review the resin selection (probably polyester, epoxy, or modified urethane) with the coating manufacturer to ensure it is resistant to the corrosive media.); Intermittent Exposure (Use a thin film or elastomeric system. Review the resin selection (probably epoxy or modified urethane resin) with the coating manufacturer to ensure it is resistant to the corrosive media.); General (Ask the coating manufacturer to recommend reinforcing material (aggregate, mortar topping, chopped glass, or glass mat) not only to withstand moderate physical abuse, but also, where necessary, to reduce the probability of cracks developing in the coating and allowing product to leak. Whenever a concrete containment structure cracks, it moves slightly, creating localized stresses in the coating that often causes cracks.) In some cases, additional coats of material may be necessary to prepare the concrete surface for the coating system.

QRG - 91




20.3Epoxy Coatings for Concrete: Service Temperatures <140°F, Aggressive Physical Abuse, Intermittent & Continuous Exposure

Not applicable







Total DFT:

Touch Up:

Concrete Coatings

Ameron Amerlock Sealer • 0Ameron NuKlad 120-A • 0Carboline Phenoline 309 • 0Dudick Protecto-Crete 110 • 108Jotun Paints Tankguard Storage • 323Koch Corrosion Control Co. EN 250 • 0Master Builders, Inc Flakeline 680 • 0Sauereisen FibreCrete 204 • 16Sigma Coatings Penetrating Sealer SF 8353 • 48Sika Corporation Sikagard 62 • 0Stonhard, Inc. Stonchem 577 • 0



Carboline Phenoline 309 • 0Dudick Protecto-Crete 110 • 108Jotun Paints Tankguard Storage • 323Koch Corrosion Control Co. EN 250 • 0Master Builders, Inc Flakeline 680 • 0Sauereisen FibreCrete 204 • 16Sigma Coatings Armour Compound 7490 • 0Sika Corporation Sikagard 62 • 0Stonhard, Inc. Stonchem 577 • 0



This coating system is NOT a substitute for a coating manufacturer's recommendation. REINFORCING: Continuous Exposure (Use a laminate - or textile-reinforced system to resist physical abuse and for immersion service. Review the resin selection (probably polyester, epoxy, or modified urethane) with the coating manufacturer to ensure it is resistant to the corrosive media.); Intermittent Exposure (Use a laminate- or textile-reinforced system. Review the resin selection (probably polyester, epoxy, or modified urethane resin) with the coating manufacturer to ensure it is resistant to the corrosive media. Depending on the type of physical abuse, a flake-reinforced system might be used on the advice of a coating specialist or manufacturer.); General (Ask the coating manufacturer to recommend reinforcing material (aggregate, mortar topping, chopped glass, or glass mat) not only to withstand moderate physical abuse, but also, where necessary, to reduce the probability of cracks developing in the coating and allowing product to leak. Whenever a concrete containment structure cracks, it moves slightly, creating localized stresses in the coating that often cause cracks.) In some cases, additional coats of material may be necessary to prepare the concrete surface for the coating system.

QRG - 92




13.1Rivet and Seam Sealer - Epoxy (Spray)




Total DFT:

Touch Up:

Seam Sealers & Putties

Ameron Amercoat 351 + 884 Additive • 0Devoe Bar-Rust 231 • 247International Interline THA-007 • 0Sherwin Williams 920-W-974 • 2Sigma Coatings Sigmaguard CSF 7443 • 132

Epoxy

Rivet and Seam Sealer (Spray)

QRG - 93




13.2Rivet and Seam Sealer - Epoxy (Trowel)




Total DFT:

Touch Up:


Ameron N114A • 0Carboline Carboguard 501 • 0Devoe Devran 142S • 21International EEAA112/EEAA113 • 0Sherwin Williams 920-W-979 • 2Sigma Coatings Novoguard Caulk 7498 • 25

Epoxy

Rivet and Seam Sealer (Trowel)

QRG - 94




13.3Rivet and Seam Sealer - Isophthalic Polyester




Total DFT:

Touch Up:


Sherwin Williams 920-W-979 • 2Sherwin Williams 970-B-703 • 40

Polyester - Isophthalic

Rivet and Seam Sealer (Spray)

QRG - 95




13.4Rivet and Seam Sealer - Vinyl Ester




Total DFT:

Touch Up:


International Interline 33SF • 0Sherwin Williams Magnaplate VE Laminate 939X465/531-0-0 • 40

Vinyl Ester


QRG - 96




13.5Polysulfide Flexible Putty




Total DFT:

Touch Up:


Ceilcote Brutem 90 • 0Dudick Caulk 149 • 0International EA-1008H/EA2008H • 0P.R.C. PR-6422 (Class B) • 0

Polysulfide Flexible Putty

QRG - 97



Manufacturer Product Coating Systems

Coatings Manual Chevron Corporation

Acceptable Brands: By Generic Classification and SubclassificationVOC(G/L)

Alkyd - Inhibited

Ameron Amercoat 5105 336 1.1 2.1 2.2

Carboline Carbocoat 115SG 408 1.1 2.1 2.2

Devoe Devguard 4160 419 1.1 2.1 2.2

Hempel Coatings (USA), Inc.

Hempalin Primer 1205 415 1.1


Hempalin Primer 1218 330 1.1 2.1 2.2

International Interlac 260 300 1.1 2.1 2.2

International Interprime 198 509

International Interprime 198 509 2.1 2.2

Jotun Paints Cromoprimer 400 1.1 2.1 2.2

PPG Industries 7-852 Series Industrial Primers 376 2.1 2.2

Sherwin Williams Hi-Solids Alkyd Metal Primer B50NZ2

308 1.1 2.1 2.2

Sigma Coatings Sigmarine Multiprimer 7117 390

Sigma Coatings Sigmarine Primer ZP 7135 372 1.1 2.1 2.2

Southern Coatings 94-258 Series 336 1.1

Tnemec Company Azeron Primer FD88 330

Tnemec Company Azeron Primer FD88 330 2.1 2.2

Tnemec Company Versare Primer 4 342

Tnemec Company Versare Primer 4 342 2.1 2.2

Alkyd Enamel

Ameron Amercoat 220 180 2.1

Ameron Amercoat 5405 327 2.1 2.2 2.8 2.9

Carboline Carbocoat 139 240 2.1 2.2 2.8 2.9

Devoe Devguard 4308 428

Devoe Devguard 4308 428 2.1 2.2 2.8 2.9

Devoe Devguard 4348 340

Devoe Devguard 4348 340 2.1 2.2 2.8


Hempalin Enamel 5214 410 2.1 2.2 2.8 2.9

International Interlac 665 427 2.1 2.2 2.8 2.9

Jotun Paints Pilot II 418 2.1 2.2 2.8 2.9

PPG Industries 7-282 336 2.1 2.2 2.8 2.9

Sherwin Williams Industrial Enamel B54Z Series 417 2.1 2.2 2.8 2.9

Sherwin Williams Industrial Enamel VOC B54-Z Series

309 2.1 2.2 2.8 2.9

Sigma Coatings Sigmarine BTD 7238 345 2.1 2.2 2.8 2.9

* See Coating System for definition of asterisk.¥ Consult CRTC's coating specialists for recommendation.

Page 1 of 18April 1998




Tnemec Company Enduratone 23 341 2.1 2.2 2.8 2.9

Tnemec Company Hi-Build Tneme-Gloss 2H 351 2.1 2.2 2.8 2.9

Epoxy

Ameron Amercoat 351 0

Ameron Amerlock 400/2 w/800 Additive 0

Ameron NuKlad 120-A 0

Sigma Coatings Novoshield 7744 13

Sigma Coatings Penetrating Sealer SF 8353 48

Sigma Coatings Sigmaguard CSF 7443 132

Nonreinforced Thin FilmDevoe Bar-Rust 233 H 170 8.3


Hempadur 1763 255 8.1 8.4 8.7


Hempadur 3573 82 8.3


Hempadur 45880 215 8.6


Hempadur 8567.1 320 8.5

PPG Industries 97-946 262 8.1

Sigma Coatings Sigmaguard CSF 7443 132 8.7 8.9

Reinforced Glass FlakeAmeron Amercoat 351 + 880 Additive 0 9.1 9.2 9.4 9.5 9.6 9.7

Industrial Environmental Coatings

EC 376 F 36 9.1 9.2 9.4 9.5 9.6 9.7

9.8 9.9

International Interzone 1000 85 9.1

Jotun Paints Marathon IQ GF 30 9.1 9.2 9.4 9.5 9.6 9.7

9.8 9.9

Sigma Coatings Sigmaguard CSF Glassflake 7954 612 9.4 9.7 9.8 9.9

Rivet and Seam Sealer (Spray)Ameron Amercoat 351 + 884 Additive 0 13.1

Devoe Bar-Rust 231 247 13.1

International Interline THA-007 0 13.1

Sherwin Williams 920-W-974 2 13.1

Sigma Coatings Sigmaguard CSF 7443 132 13.1

Rivet and Seam Sealer (Trowel)Ameron N114A 0 13.2

Carboline Carboguard 501 0 13.2

Devoe Devran 142S 21 13.2






International EEAA112/EEAA113 0 13.2

Sherwin Williams 920-W-979 2 13.2

Sigma Coatings Novoguard Caulk 7498 25 13.2

Epoxy - Amine Adduct

Ameron Amercoat 90HS w/880 Additive 323 12.1 12.4

Carboline Phenoline 187 312 1.5

Ceilcote Flakeline 600 210 1.5

Devoe Bar-Rust 236 170 1.5

Dudick Primer 67 0 1.5

Dudick Protecto-Line 100 0 20.1 20.2


Hempadur 3553 0 1.5

Jotun Paints Tankguard HB 390

Koch Corrosion Control Co.

AEP 20 0 20.1 20.2

Master Builders, Inc Ceilguard 663 0 20.2

Master Builders, Inc Flakeline 680 0 20.1 20.3

PPG Industries UC59633/97-139 342 1.5

Sauereisen ConoGlaze 202 15 20.2

Sauereisen FibreCrete 204 16 20.1 20.3

Sherwin Williams Phenicon HS 920-W-A11/700-C-685

230 1.5

Sigma Coatings Armour Compound 7490 0

Sika Corporation Sikagard 62 0 20.1 20.2 20.3

Stonhard, Inc. Stonchem 501 0 20.2



Coal TarInternational Intertherm 228 326 12.1 12.4

LaminateDevoe Devmat 110 39 10.1 10.2 10.4 10.5 10.6 10.7

10.8 10.9

Nonreinforced Thin FilmAmeron Amercoat 395 FD 217 8.3 8.7 8.8 8.9

Ameron Amercoat 90HS 323 1.5 8.1 8.2 8.4 8.5 8.6

Ameron Amercoat 90HS w/880 Additive 323 12.1 12.4

Carboline Carboguard 890 214 8.1 8.2 8.4 8.5

Carboline Phenoline 187 312 8.6 8.7 8.8

Devoe Bar-Rust 236 170 8.1 8.2 8.4 8.6 8.7






International Interline 850 225 8.1 8.3

International Interseal 670 HS 240 8.5 8.6

International Interseal 670 HS 240 8.5

PPG Industries 97-160 150 8.6 8.7 8.8 8.9


230 8.7

Sigma Coatings EHB 7433 252 8.7

Sigma Coatings Phenguard Finish 7436 300 8.2 8.4 8.5 8.6

Sigma Coatings Phenguard Primer 7409 300 8.2 8.4 8.5 8.6

Sigma Coatings Sigmacover TCP 7476 240 8.1

Tnemec Company Tneme-Liner 61 169 8.2 8.4 8.5 8.6 8.7 8.8

8.9

Reinforced Glass FlakeDevoe Devmat 110 39 9.1 9.2 9.4 9.5 9.6 9.7

9.8 9.9

Sigma Coatings Sigmaguard CSF Glassflake 7954 612 9.6

Sigma Coatings Sigmaguard CSF Glassflake 7954* 0 9.1

Epoxy - Phenolic

Ameron Amercoat 91 410 11.2.1 11.4.1 11.4.2 11.5.1 11.5.2 11.6.111.6.2

Carboline Phenoline 1205 255 11.2 11.4 11.5 11.6

Carboline Phenoline 368 WG 291 11.2.1 11.4.1 11.4.2 11.5.1 11.5.2 11.6.1

11.6.2

Carboline Thermoline 450 255 12.1 12.4

Dampney Company, Inc. Thurmalox 215 274

Dampney Company, Inc. Thurmalox 216 321

Devoe HT-403 217 12.1 12.4


Hempadur 1530 417 12.4


Hempadur 1550 320 11.2 11.4 11.5 11.6


Hempadur 1554 325 12.1

Jotun Paints Tankguard Storage 323

PPG Industries 97-946 262 12.1 12.4

Sherwin Williams Epo-Phen B62A55/B62V55 264 12.1 12.4

Sigma Coatings Phenguard Finish 7436 300

Sigma Coatings Phenguard Finish 7436 300 11.2 11.4 11.5 11.6

Sigma Coatings Phenguard Primer 7409 300






Sigma Coatings Phenguard Primer 7409 300 11.2 11.4 11.5 11.6

LaminateInternational Interline 985 0 10.1

Sigma Coatings Novaguard 7453 25 10.1 10.2 10.4 10.5 10.6 10.710.8 10.9

Nonreinforced Thin FilmCarboline Phenoline 368 WG 291 8.2

Carboline Phenoline 373 233 8.9

Devoe Devchem 253 213 8.8 8.9


Hempadur 1550 320 8.2 8.8 8.9 8.11

International Interline 850 225 8.4 8.7 8.8 8.9 8.11

Jotun Paints Tankguard Aqua 10 8.3

Jotun Paints Tankguard Storage 323 8.1 8.2 8.5 8.6 8.7 8.8

8.9

PPG Industries 95-267** 336 8.11


230 8.2 8.4 8.5 8.6 8.8 8.9

8.11

Sherwin Williams Phenicon HS Flake Filled 920-R-A11/700-C-685

230 8.9

Sigma Coatings Phenguard Finish 7436 300 8.11

Sigma Coatings Phenguard Primer 7409 300 8.11

Sigma Coatings Sigmacover TCP 7476 240 8.1

Sigma Coatings Sigmaguard EHB 7433 252 8.2

Sigma Coatings Sigmaguard EHB 7433 252 8.2 8.4 8.5 8.6 8.8 8.9

Reinforced Glass FlakeCarboline Phenoline 1205 255 9.1

Sigma Coatings Sigmaguard CSF Glassflake 7954 612 9.2 9.5

Thin FilmSigma Coatings Sigmacover CM Miocoat II 7427US 324 12.4

Epoxy - Polyamide

Ameron Amercoat 385 276 2.14 4.4

AOC Penguard Primer 238 4.4


Carboline Carboguard 893 195 1.4 2.14 4.4

Devoe Devran 224HS 212 1.4 2.12 2.12.1 2.14


Hempadur 4520 400 2.12 2.12.1 2.14







Hempadur 4563 207 1.4


Hempadur 45880 215 1.4 2.12 2.12.1 2.14

International Intercure 200 320 4.4

International Intergard 251 390 4.4


International Intergard270 95 2.14

International Interseal 670 HS 240

International Interseal 670 HS 240


Jotun Paints Jotamastic 87 196 2.14

Jotun Paints Penguard HB 380 1.4

Jotun Paints Penguard Topcoat 400 2.12 2.12.1 2.14


PPG Industries Aquapon 97-130 373 2.12 2.12.1

Sherwin Williams Recoatable Epoxy Primer B67R5/B67V5

295 1.4 2.14 4.4

Sherwin Williams Sher-Tile B-67-200 Series/B67V200 175 2.12 2.12.1

Sherwin Williams Tile-Clad II Plus B62-500 Series/B62V500

275 2.12 2.12.1

Sigma Coatings CM II 7456 US 300 2.12 2.12.1 2.14

Sigma Coatings Sigmacover Primer II 7413US 300

Sigma Coatings Sigmarite PC Unicoat 5483 PC 252 1.4 2.14 4.4

Tnemec Company Hi-Build Epoxoline 66 362

Tnemec Company Hi-Build Epoxoline 66 362 2.12 2.12.1 2.14

Tnemec Company Hi-Build Epoxoline II N69 253 2.12 2.12.1 2.14

Tnemec Company S.T. Typoxy N27 300

Tnemec Company S.T. Typoxy N27 300 4.4

High BuildAmeron Amercoat 385 276 1.4 2.6 2.14 3.1 3.1.1 3.2

3.5 3.5.1 3.7 4.4

Ameron Amerlock 400 120 2.12

Devoe Devran 224HS 212 2.6 2.13 2.13.1 3.1 3.1.1 3.2

3.5 3.5.1 3.7 4.4


Hempadur 4520 400 2.6 2.13 2.13.1 3.1 3.1.1 3.2

3.5 3.5.1 3.7


Hempadur 45880 215 2.6 2.13 2.13.1 3.1 3.1.1 3.2

3.5 3.7 4.4


Hempadur 5540 285 3.5.1 4.4







International Intergard 475 HS 175 3.1 3.1.1 3.2 4.4

International Interseal 670 HS 240 2.13 2.13.1 3.5 3.5.1 3.7

Jotun Paints Penguard HB 380 2.6 3.1.1 3.2 3.5 3.5.1 3.7

4.4

Jotun Paints Penguard Tiecoat 100 480 3.1

Jotun Paints Penguard Topcoat 400 2.13

Jotun Paints Primastic 238 2.13.1


PPG Industries Aquapon 97-130 373 2.6 2.13 2.13.1 3.2 3.5 3.5.1

3.7 4.4

Sherwin Williams Macropoxy 646 B58-600 Series/B68V600

235 2.6 3.1 3.1.1 3.2 3.5 3.5.1

3.7 4.4

Sherwin Williams Sher-Tile B-67-200 Series/B67V200 175 2.13 2.13.1

Sigma Coatings CM II 7456 US 300 2.6 2.13 2.13.1 3.2 3.5 3.5.1

3.7 4.4

Sigma Coatings Sigmarite PC Unicoat 5483 PC 252 3.1 3.1.1

Tnemec Company Chembuild 135 133 3.1 3.2 3.5 3.5.1

Tnemec Company Hi-Build Epoxoline II N69 253 2.6

Tnemec Company S.T. Typoxy N27 300 2.6 2.13 2.13.1 3.1 3.2 3.5

3.5.1 3.7 4.4

Nonreinforced Thin FilmCarboline Carboguard 891 214 8.3

International Interline 359 320 8.2

International Interline 850 225 8.5 8.6



PPG Industries 97-946 262 8.4 8.5

Sherwin Williams Tank Clad HS B62W80 177 8.1 8.3

Sigma Coatings Sigmaguard CSF 85 7785* 5 8.3

Sigma Coatings Sigmaguard HSV 5476 156 8.3

Tnemec Company Hi-Build Epoxoline II N69 253 8.2 8.4 8.5 8.6

Tnemec Company Pota-Pox Plus N140 274 8.3

Reinforced Glass FlakeSigma Coatings Sigmaguard CSF Glassflake 7954 612 9.6

Thin FilmSigma Coatings Phenguard Primer 7409 300 12.1

Sigma Coatings Sigmacover CM Miocoat II 7427US 324 12.1






Epoxy - Zinc-Rich

Ameron Amercoat 68HS 288 3.2

Ameron Amercoat 68HS 288

Carboline Carbozinc 859 325 3.2 3.4

Devoe Catha-Coat 302H 282 3.2


Hempadur 1736 337 3.2

International Interzinc 280 100 3.2


Jotun Paints Barrier 294 3.2

Jotun Paints Barrier 294

PPG Industries Aquapon Zinc Rich 97-670 403 3.2 3.4

Sherwin Williams Zinc Clad IV B69A8/B69V8 308 3.2

Sigma Coatings Sigmacover Zinc Primer II 7402 US 312 3.2

Tnemec Company Tneme-Zinc 90-97 320 3.2

Epoxy Mastic - Surface Tolerant

Ameron Amerlock 400 120 1.8 2.12 2.12.1 2.13 2.13.1 2.15

3.5

Carboline Carboguard 890 214 1.8 2.12 2.12.1 2.13 2.13.1 2.15

3.5

Devoe Bar-Rust 231 247 1.8 2.13

Devoe Devran 224HS 212 2.12 2.15 3.5


Hempadur 4515 180 1.5


Hempadur 45880 215 1.8 2.12 2.13 2.15 3.5


International Interseal 670 HS 240 2.12 2.13 2.15 3.5

Jotun Paints Jotamastic 87 196 1.8 2.12 2.13 2.15 3.5

PPG Industries 97-145 128 1.4 1.8 2.12 2.13 2.14 2.153.5 4.4

Sherwin Williams Dura-Plate 235 B67-235 Series B67/V235

272 1.8 2.12 2.13 2.15 3.5

Sigma Coatings TCP 7476 224 1.5 1.8 2.12 2.13 2.15 3.5

Tnemec Company Chembuild 135 133 2.12 2.13 2.15 3.5

High BuildCarboline Carboguard 890 214 2.6 3.1.1 3.2 3.5.1 3.7 4.4







Epoxy Mastic - Surface Tolerant - Aluminum Filled

Ameron Amerlock 400 AL 120 1.8.1 2.12.1 2.13.1 2.15.1 3.5.1

Carboline Carbomastic 15 88 1.8.1 2.12.1 2.13.1 2.15.1 3.5.1

Devoe Bar-Rust 239 119 1.8.1 2.12.1 2.13.1 3.5.1

Devoe Devran 224 Aluminum 212 2.15.1


Hempadur 45880-19870 215 2.12.1 2.13.1 2.15.1 3.5.1


Hempadur 4588-1987 215 1.8.1

International Interseal 670 HS 240 1.8.1

International Interseal 670 HS 240 2.12.1 2.13.1 2.15.1 3.5.1

Jotun Paints Jotamastic 87 AL 110 1.8.1 2.12.1 2.13.1 2.15.1 3.5.1

PPG Industries 97-148 0 2.15.1

PPG Industries UC65372/UC65373 118 1.8.1 2.12.1 2.13.1 3.5.1

Sherwin Williams Epoxy Mastic Aluminum II B62S100/BV100

171 1.8.1 2.12.1 2.13.1 2.15.1 3.5.1

Sigma Coatings TCP Aluminum 7477 240 1.8.1 2.12.1 2.13.1 2.15.1 3.5.1

Tnemec Company Chembuild 135 133 1.8

Tnemec Company Chembuild 135-1243 133 1.8.1 2.12.1 2.13.1 2.15.1 3.5.1

Tnemec Company S.T. Typoxy N27 300 2.12 2.12.1

Nonreinforced Thin FilmJotun Paints Jotamastic 87 AL 110 8.4

Epoxy Non-Skid

Ameron Amerlock 400-GFK w/888 Additive 172

Carboline Carboguard 1209 with grit 96 4.6

Devoe Devgrip 237C 340 4.6


Hempadur 350 4.6


Jotun Paints Primastic with 3883 Non-Skid aggregate

238 4.6

PPG Industries 97-145 128

PPG Industries Aquapon High Build with Grit 373 4.6

Sherwin Williams ArmorSeal 300 340 4.6

Sigma Coatings SigmaGlaze 5492 0 4.6

Tnemec Company Tneme-Glaze 280 2 4.6






Epoxy Novolac

Carboline Phenoline 309 0 20.1 20.3

Dudick Protecto-Crete 110 108 20.3


EN 250 0 20.3

Nonreinforced Thin FilmDevoe Devchem 253 213 8.5

Reinforced Glass FlakeCarboline Phenoline 1205 255 9.1 9.2 9.4 9.5 9.6 9.7

9.8 9.9

Epoxy-Polyamine

Tnemec Company Hi-Build Epoxoline II N69 253

Nonreinforced Thin FilmCarboline Phenoline 310* 12 8.1 8.2 8.4 8.5 8.7

Carboline Phenoline 380* 12 8.6 8.8 8.9

Polyester

LaminateDudick Protecto-Coat 600 0 10.1

Sherwin Williams Poly-Glass Laminate 939 Series/531-0-006

40 10.1

Polyester - Bisphenol "A"

LaminateCeilcote Lining 74 0 10.2 10.5 10.7 10.8 10.9

Polyester - Isophthalic

LaminateAOC Vipel F701 0 10.1

AOC Vipel F737 0 10.1

Ashland Chemical Aropol 7241-15 0 10.1

Reichold Dion Iso 6631T 0 10.1

Reinforced Glass FlakeJotun Paints Baltoflake 75 9.3

Sherwin Williams Coroplate I 948-W-016/531-0-006 240 9.1

Rivet and Seam Sealer (Spray)Sherwin Williams 920-W-979 2 13.3

Sherwin Williams 970-B-703 40 13.3






Polyester Non-Skid

Ceilcote Flakeline 211 or 212 0 4.5

Dudick Protecto-Coat 500 250 4.5

Glidden Glidflake 7500 250 4.5


Polyester GF 35920 35 4.5


International Interzone 2000 35

Jotun Paints Baltoflake 75

Jotun Paints Baltoflake with Carborex 20 75

PPG Industries 90000/90002 420

PPG Industries 94701, VOC 337

Sherwin Williams Coroplate I 948-W-016/531-0-006 240 4.5

Polysiloxane Resin - Inorganic Coating

Ameron PSX 738 96 12.7

Polysulfide Flexible Putty

Ceilcote Brutem 90 0 13.5

Dudick Caulk 149 0 13.5

International EA-1008H/EA2008H 0 13.5

P.R.C. PR-6422 (Class B) 0 13.5


Ameron Amercoat 450 Series 335 2.15 2.15.1 3.1 3.1.1 3.2 3.5

3.5.1 3.7 3.8 4.4

Carboline Carbothane 134 HG 288 2.15 2.15.1 3.1 3.1.1 3.2 3.5

3.5.1 3.7 3.8 4.4 4.6

Devoe Devthane 379 311 2.15 2.15.1 3.1 3.1.1 3.2 3.53.5.1 3.7 3.8 4.4 4.6


55 Series 372 2.15 2.15.1 3.1 3.1.1 3.2 3.5

3.5.1 3.7 3.8 4.4 4.6


Hempathane 5595 332 2.15 2.15.1 3.1 3.1.1 3.2 3.5

3.5.1 3.7 3.8 4.4 4.6

International Interthane 990 395 2.15.1 3.1 3.2 3.5.1 3.7 3.8

4.4 4.6

International Interthane 990 395






International Interthane 990HS 332 2.15 2.15.1 3.1 3.1.1 3.2 3.5

3.5.1 3.7 3.8 4.4 4.6

Jotun Paints Hardtop HB 256 2.15 2.15.1 3.1 3.1.1 3.2 3.5

3.5.1 3.7 3.8 4.4 4.6

PPG Industries 95-812 241 2.15 3.2 3.5 3.5.1 3.7 3.8

4.4 4.6

PPG Industries 95-8512 0 2.15.1 3.1

Sherwin Williams Hi-Solids Polyurethane B65-300 SeriesB65/V30

289 2.15 2.15.1 3.1 3.1.1 3.2 3.5

3.5.1 3.7 3.8 4.4 4.6

Sigma Coatings Sigmadur HS Semigloss 7530 288

Sigma Coatings Sigmadur Versafinish 5522 320 2.15 2.15.1 3.1 3.1.1 3.2 3.5

3.5.1 3.7 3.8 4.4 4.6

Tnemec Company CRU 291 281 4.6

Tnemec Company Endura-Shield 74 229 2.15 2.15.1 3.1 3.2 3.5 3.5.1

3.7 3.8 4.4

Tnemec Company Endura-Shield 75 193 2.15 2.15.1 3.1 3.2 3.5 3.5.1

3.7 3.8 4.4

Self-Cured Inorganic Zinc - Solvent Reducible

Ameron Dimetcote 9 491

Ameron Dimetcote 9 491 1.3 2.4 2.5 2.6 3.1

Ameron Dimetcote 9HS 323 1.3 2.4 2.5 2.6 3.1

Carboline Carbozinc 11 515 1.3 2.4 2.5 2.6 3.1 3.3

Carboline Carbozinc 11 HS 264 1.3 2.4 2.5 2.6 3.1 3.3

Dampney Company, Inc. Thurmalox 215 274 1.3

Dampney Company, Inc. Thurmalox 245C Silicone Zinc Dust Primer

413 2.4 2.7

Devoe Catha-Coat 304V 336 1.3 2.4 2.5 2.6 3.1


Galvosil 1568 320 3.1 3.3


Galvosil 15680 320 1.3 2.5 2.6


Galvosil 1578 520 1.3 2.4 2.5 2.6 3.1 3.3

International Interzinc 22 490 1.3 2.5 3.1

International Interzinc 22 490

International Interzinc 22HS 340 2.5 3.1

International Interzinc 22HS 340

Jotun Paints Resist 78 465 2.6 3.1

Jotun Paints Resist 86 455

Jotun Paints Resist GTI 458 1.3 2.4 2.5






PPG Industries Metalhide 1001 Primer 97-673/97-674

397 1.3 2.4 2.5 2.6 3.1 3.3

Sherwin Williams Hi-Temp Aluminum 100-A-518 420 2.7

Sherwin Williams Zinc Clad II B69V3/B69D11 462 1.3 2.4 2.5 2.6 3.1

Sherwin Williams Zinc Clad II HS B69VZ1/B69VZ3/B69D11

312 2.4 2.5 2.6 3.1

Sigma Coatings Penetrating Sealer SF 8353 48 1.3

Sigma Coatings Silguard MC II 7551 US 324 2.4 2.6 3.1

Tnemec Company SpanPrime IOZ 356 397 1.3 2.4 2.6 3.1

Tnemec Company Tneme-Zinc 90-96 323 1.3 2.4 2.6 3.1

Nonreinforced Thin FilmCarboline Carbozinc 11 HS 264 8.10 8.11


International Interzinc 22HS 340 8.10

Jotun Paints Resist GTI 458 8.10 8.11

PPG Industries Metalhide 1001 Primer 97-673/97-674

397 8.10

Sherwin Williams Zinc Clad II HS B69VZ1/B69VZ3/B69D11

312 8.10

Sigma Coatings Silguard MC II 7551 US 324 8.10

Tnemec Company SpanPrime IOZ 356 397 8.10

Tnemec Company Teneme-Zinc 90E-92 474 8.10

Self-Cured Inorganic Zinc - Water Reducible

Ameron Dimetcote 21-5 0

Ameron Dimetcote 21-5 0 1.3.1 3.1.1

Carboline Carbozinc 11 WB 0 1.3.1 3.1.1 3.3.1

Devoe Catha-Coat 305 0 1.3.1 3.1.1


Galvosil 1562 0 1.3.1 3.1.1


International Interzinc 685 0 3.1.1

Jotun Paints Jotacote 5 0 1.3.1 3.1.1

Sherwin Williams Zinc Clad XI B69V11/B69D11 0 1.3.1 3.1.1

Sigma Coatings Silguard SC 7550 0 1.3.1

Sigma Coatings Silguard SC 7550 0

Nonreinforced Thin FilmAmeron Dimetcote 21-5 0 8.10

Devoe Catha-Coat 305 0 8.10


Galvosil 1562 0 8.10






Silicone - High Temp

Ameron PSX 892HS 324 2.4 2.7 2.11

Carboline Thermaline 4700 480 2.4 2.7 2.11

Dampney Company, Inc. Thurmalox 230C* 360 2.4 2.7 2.11

Devoe HT-12 572 2.4 2.7 2.11


5690 400 2.4 2.7 2.11


5691 586 2.4 2.7 2.11

International Intertherm 50 495

International Intertherm 50 495 2.7 2.11

Jotun Paints Solvalitt 497 2.4 2.7 2.11

PPG Industries 97-724 554 2.4 2.7 2.11

PPG Industries Pitt-Therm 97-724 0

Sherwin Williams Hi-Temp Aluminum 100-A-518 420 2.4 2.7 2.11

Sherwin Williams Poly-Glass Laminate 939 Series/531-0-006

40 2.11

Sigma Coatings Sigmatherm Aluminum 5267 600 2.4

Tnemec Company Silicone Aluminum 39-1061 587 2.4 2.7 2.11

Silicone Acrylic

Ameron Amercoat 874HS 420 2.5 2.10

Ameron Amercoat 894 588 2.3

Carboline Thermoline 4900 564 2.3 2.5 2.10

Dampney Company, Inc. Thurmalox 260C 333 2.3 2.5 2.10

Devoe HT-4 548 2.3 2.5 2.10


5694 415 2.3 2.5 2.10

International Intertherm 875 562 2.5 2.10

Jotun Paints 37-F-209 492 2.5

Jotun Paints Solvalitt 497 2.10

Jotun Paints Solvalitt 497

PPG Industries 97-710 568 2.3 2.5 2.10

Sherwin Williams Thermo-Cure B59A380 376 2.3 2.5 2.10

Sigma Coatings Sigmaguard CSF Glassflake 7954* 0 2.10

Silicone Alkyd







Carboline Carbocoat 150HG 336 1.2 2.3

Devoe Catha-Coat 302H 282 1.2

Devoe HT-8 433 2.3


Alkyd Enamel 538U 397

International Interlac 800 333

International Intertherm 875 562

Jotun Paints Aluminum Paint HR 400


PPG Industries UC46654 554 2.3

Sherwin Williams Kem Hi-Temp 850 Series 550 1.2

Sherwin Williams Thermo-Cure B59A380 376 2.3

Splash Zone Coating

(Spray)Ameron Tideguard 182 0 4.1



Spray Guard 3549 0 4.1

International Interzone 485 74 4.1 4.1.1

Jotun Paints Marathon IQ GF 30 4.1 4.1.1

Sigma Coatings Armour Compound 7490 0 4.1

Asbestos Free (Trowel)Carboline Carboguard A-788 0 4.1.1

Devoe Devclad 182 1 4.1.1

Reliance Rel-Zone 7815 0 4.1.1

Temperature-Indicating Paint

International Intertherm 715 550 1.9

Tempil Temp-Alarm 126A 560 1.9

Universal Primer


Carboline Carbocoat 150HG 336 3.7 3.8

Carboline Rustbond Penetrating Sealer 24 3.7 3.8

Devoe Devguard 4160 419 3.7 3.8


Uni-Primer 1314 520 3.7 3.8

International Interseal 670 HS 240 3.7 3.8

Jotun Paints Penguard HB 380 3.7 3.8






PPG Industries 97-680 414 3.7 3.8

Sherwin Williams Hi-Solids Alkyd Metal Primer B50NZ3

308 3.7 3.8

Sherwin Williams Kem Kromik B50NZ6 415 3.7 3.8

Sigma Coatings Sigmacover Primer II 7413US 300 3.7 3.8

Tnemec Company Chem-Prime HS 37H 348 3.7 3.8

Butyral Wash PrimerCarboline Rustbond Penetrating Sealer 24 1.7

Vinyl

Carboline Carbocrylic 3359 DTM 60 3.3 3.3.1


Hempanyl Primer 1606 685 3.3

Jotun Paints Vinylguard Silvergray 88 531

PPG Industries Vinyl Primer and 97-349 702 3.3

Butyral Wash PrimerAmeron Galvaprep 0 1.7

Carboline Rustbond Penetrating Sealer 24 1.7

Devoe Vy-Kote 443 740 1.7


Hemucryl TI-Coat 1820 140 1.7

International Interprime 519 702 1.7

Jotun Paints Washprimer 708 1.7

PPG Industries 97-687/688 Polyclutch Wash Primer 742 1.7

Sherwin Williams DTM Wash Primer B71Y1 143 1.7

High BuildAmeron Amercoat 220 180 3.3 3.3.1 3.4

Carboline Carbocrylic 3359 DTM 60 3.4


Hempanyl Hi-Build 4622 546 3.3

Jotun Paints Pioner TC 565 3.3 3.4

Jotun Paints Vinylguard Silvergray 88 531 3.4

PPG Industries 97-350 Series 613 3.3 3.4

Vinyl Ester

Glass Flake (Spray)PPG Industries 94301** 335 8.11

LaminateAOC Vipel F010 0 10.2 10.4 10.5 10.6 10.7 10.8

10.9






Ashland Chemical Hetron 922 0 10.2 10.4 10.5 10.6 10.7 10.8

10.9

Dudick Protecto-Coat 800 0 10.2 10.4 10.5 10.6 10.7 10.8

10.9

International Interline 910 0 10.7

International Interline 985 0 10.4 10.5 10.6


Reichold Atlac 580 0 10.2 10.4 10.5 10.6 10.7

Sherwin Williams Magnaplate VE Laminate 939X465/531-0-006

40 10.2 10.4 10.5 10.6 10.7 10.8

10.9

Reinforced Glass FlakeDudick Protecto-Coat 800 0 9.3 9.7 9.8

Dudick Protecto-Coat 900 0 9.9

Dudick Protecto-Coat 900HT 0 9.1 9.4 9.5 9.9

Dudick Protecto-Flake 800 0 9.2 9.4 9.6


International Interzone 1000 85 9.4 9.5 9.6 9.7

PPG Industries 94301 335 9.5

PPG Industries 94301, VOC 334 9.1 9.2 9.4 9.5 9.6 9.8

9.9

Sherwin Williams Cor-Cast TF-VE 228 9.2 9.3 9.4 9.6

Sherwin Williams Cor-Cote FC-VE 228 9.7 9.8

Sherwin Williams Cor-Cote FC-VEN 228 9.5 9.9

Rivet and Seam Sealer (Trowel)International Interline 33SF 0 13.4

Sherwin Williams Magnaplate VE Laminate 939X465/531-0-006

40 13.4

Vulcanized Neoprene

Mark Tool Splashtron 0 4.3

Zinc-Rich - Galvanizing Repair

Ameron Amercoat 68HS 288 1.6

Carboline Carbozinc 859 325

Devoe Catha-Coat 313 282


Zinc Primer 1649 593 1.6








Jotun Paints Barrier 294 1.6

PPG Industries UC65147/97-674 336

Sherwin Williams Zinc Clad 5 B69A45 488 1.6

Sigma Coatings Sigmacover Zinc Primer II 7402 US 300 1.6

Tnemec Company Tneme-Zinc 90-97 320 1.6



Generic Classification Subclassification Coating Systems


Acceptable Brands: By Manufacturer and ProductVOC (G/L)

Ameron

Amercoat 180 312Universal Primer 3.7 3.8

Amercoat 220 180Alkyd Enamel 2.1

High BuildVinyl 3.3 3.3.1 3.4

Amercoat 351 0Epoxy

Amercoat 351 + 880 Additive 0Reinforced Glass FlakeEpoxy 9.1 9.2 9.4 9.5 9.6 9.7

Amercoat 351 + 884 Additive 0Rivet and Seam Sealer (Spray)Epoxy 13.1

Amercoat 385 276Epoxy - Polyamide 2.14 4.4

High BuildEpoxy - Polyamide 1.4 2.6 2.14 3.1 3.1.1 3.2

3.5 3.5.1 3.7 4.4

Amercoat 395 FD 217Nonreinforced Thin FilmEpoxy - Amine Adduct 8.3 8.7 8.8 8.9

Amercoat 450 Series 335Polyurethane - Aliphatic 2.15 2.15.1 3.1 3.1.1 3.2 3.5

3.5.1 3.7 3.8 4.4

Amercoat 5105 336Alkyd - Inhibited 1.1 2.1 2.2

Amercoat 5405 327Alkyd Enamel 2.1 2.2 2.8 2.9

Amercoat 68HS 288Epoxy - Zinc-RichEpoxy - Zinc-Rich 3.2

Zinc-Rich - Galvanizing Repair 1.6

Amercoat 874HS 420Silicone Acrylic 2.5 2.10

Amercoat 894 588Silicone Acrylic 2.3

Silicone Alkyd 1.2 2.3

Amercoat 90HS 323Nonreinforced Thin FilmEpoxy - Amine Adduct 1.5 8.1 8.2 8.4 8.5 8.6


* See Coating System for definition of asterisk.‡ Consult CRTC's coating specialists for recommendation.




Amercoat 90HS w/880 Additive 323Epoxy - Amine Adduct 12.1 12.4

Nonreinforced Thin FilmEpoxy - Amine Adduct 12.1 12.4

Amercoat 91 410Epoxy - Phenolic 11.2.1 11.4.1 11.4.2 11.5.1 11.5.2 11.6.1

11.6.2

Amerlock 400 120High BuildEpoxy - Polyamide 2.12

Epoxy Mastic - Surface Tolerant 1.8 2.12 2.12.1 2.13 2.13.1 2.153.5

Amerlock 400 AL 120Epoxy Mastic - Surface Tolerant - Aluminum Filled

1.8.1 2.12.1 2.13.1 2.15.1 3.5.1

Amerlock 400/2 w/800 Additive 0Epoxy

Amerlock 400-GFK w/888 Additive 172Epoxy Non-Skid

Dimetcote 21-5 0Self-Cured Inorganic Zinc - Water ReducibleSelf-Cured Inorganic Zinc - Water Reducible

1.3.1 3.1.1

Nonreinforced Thin FilmSelf-Cured Inorganic Zinc - Water Reducible

8.10

Dimetcote 9 491Self-Cured Inorganic Zinc - Solvent ReducibleSelf-Cured Inorganic Zinc - Solvent Reducible

1.3 2.4 2.5 2.6 3.1

Dimetcote 9HS 323Self-Cured Inorganic Zinc - Solvent Reducible

1.3 2.4 2.5 2.6 3.1

Galvaprep 0Butyral Wash PrimerVinyl 1.7

N114A 0Rivet and Seam Sealer (Trowel)

Epoxy 13.2

NuKlad 120-A 0Epoxy






PSX 738 96Polysiloxane Resin - Inorganic Coating

12.7

PSX 892HS 324Silicone - High Temp 2.4 2.7 2.11

Tideguard 182 0(Spray)Splash Zone Coating 4.1

AOC

Penguard Primer 238Epoxy - Polyamide 4.4

Vipel F010 0LaminateVinyl Ester 10.2 10.4 10.5 10.6 10.7 10.8

10.9

Vipel F701 0LaminatePolyester - Isophthalic 10.1

Vipel F737 0LaminatePolyester - Isophthalic 10.1

Ashland Chemical

Aropol 7241-15 0LaminatePolyester - Isophthalic 10.1

Hetron 922 0LaminateVinyl Ester 10.2 10.4 10.5 10.6 10.7 10.8

10.9

Carboline

Carbocoat 115SG 408Alkyd - Inhibited 1.1 2.1 2.2

Carbocoat 139 240Alkyd Enamel 2.1 2.2 2.8 2.9

Carbocoat 150HG 336Silicone Alkyd 1.2 2.3

Universal Primer 3.7 3.8

Carbocrylic 3359 DTM 60Vinyl 3.3 3.3.1

High BuildVinyl 3.4

Carboguard 1207 0(Spray)Splash Zone Coating 4.1






Carboguard 1209 with grit 96Epoxy Non-Skid 4.6

Carboguard 501 0Rivet and Seam Sealer (Trowel)

Epoxy 13.2

Carboguard 890 214Nonreinforced Thin FilmEpoxy - Amine Adduct 8.1 8.2 8.4 8.5

Epoxy - Polyamide 2.14

Epoxy Mastic - Surface Tolerant 1.8 2.12 2.12.1 2.13 2.13.1 2.153.5

High BuildEpoxy Mastic - Surface Tolerant 2.6 3.1.1 3.2 3.5.1 3.7 4.4

Carboguard 891 214Nonreinforced Thin FilmEpoxy - Polyamide 8.3

Carboguard 893 195Epoxy - Polyamide 1.4 2.14 4.4

High BuildEpoxy Mastic - Surface Tolerant 3.1

Carboguard A-788 0Asbestos Free (Trowel)Splash Zone Coating 4.1.1

Carbomastic 15 88Epoxy Mastic - Surface Tolerant - Aluminum Filled

1.8.1 2.12.1 2.13.1 2.15.1 3.5.1

Carbothane 134 HG 288Polyurethane - Aliphatic 2.15 2.15.1 3.1 3.1.1 3.2 3.5

3.5.1 3.7 3.8 4.4 4.6

Carbozinc 11 515Self-Cured Inorganic Zinc - Solvent Reducible

1.3 2.4 2.5 2.6 3.1 3.3

Carbozinc 11 HS 264Self-Cured Inorganic Zinc - Solvent Reducible

1.3 2.4 2.5 2.6 3.1 3.3

Nonreinforced Thin FilmSelf-Cured Inorganic Zinc - Solvent Reducible

8.10 8.11

Carbozinc 11 WB 0Self-Cured Inorganic Zinc - Water Reducible

1.3.1 3.1.1 3.3.1

Carbozinc 859 325Epoxy - Zinc-Rich 3.2 3.4


Phenoline 1205 255Epoxy - Phenolic 11.2 11.4 11.5 11.6






Reinforced Glass FlakeEpoxy - Phenolic 9.1

Reinforced Glass FlakeEpoxy Novolac 9.1 9.2 9.4 9.5 9.6 9.7

9.8 9.9

Phenoline 187 312Epoxy - Amine Adduct 1.5

Nonreinforced Thin FilmEpoxy - Amine Adduct 8.6 8.7 8.8

Phenoline 309 0Epoxy Novolac 20.1 20.3

Phenoline 310* 12Nonreinforced Thin FilmEpoxy-Polyamine 8.1 8.2 8.4 8.5 8.7

Phenoline 368 WG 291Epoxy - Phenolic 11.2.1 11.4.1 11.4.2 11.5.1 11.5.2 11.6.1

11.6.2

Nonreinforced Thin FilmEpoxy - Phenolic 8.2

Phenoline 373 233Nonreinforced Thin FilmEpoxy - Phenolic 8.9

Phenoline 380* 12Nonreinforced Thin FilmEpoxy-Polyamine 8.6 8.8 8.9

Rustbond Penetrating Sealer 24Universal Primer 3.7 3.8

Butyral Wash PrimerUniversal Primer 1.7

Butyral Wash PrimerVinyl 1.7

Thermaline 4700 480Silicone - High Temp 2.4 2.7 2.11

Thermoline 450 255Epoxy - Phenolic 12.1 12.4

Thermoline 4900 564Silicone Acrylic 2.3 2.5 2.10

Ceilcote

Brutem 90 0Polysulfide Flexible Putty 13.5

Flakeline 211 or 212 0Polyester Non-Skid 4.5

Flakeline 600 210Epoxy - Amine Adduct 1.5

Lining 74 0LaminatePolyester - Bisphenol "A" 10.2 10.5 10.7 10.8 10.9






Dampney Company, Inc.

Thurmalox 215 274Epoxy - PhenolicSelf-Cured Inorganic Zinc - Solvent Reducible

1.3

Thurmalox 216 321Epoxy - Phenolic

Thurmalox 230C* 360Silicone - High Temp 2.4 2.7 2.11

Thurmalox 245C Silicone Zinc Dust Primer 413Self-Cured Inorganic Zinc - Solvent Reducible

2.4 2.7

Thurmalox 260C 333Silicone Acrylic 2.3 2.5 2.10

Devoe

Bar-Rust 231 247Rivet and Seam Sealer (Spray)Epoxy 13.1

Epoxy Mastic - Surface Tolerant 1.8 2.13

Bar-Rust 233 H 170Nonreinforced Thin FilmEpoxy 8.3

Bar-Rust 236 170Epoxy - Amine Adduct 1.5

Nonreinforced Thin FilmEpoxy - Amine Adduct 8.1 8.2 8.4 8.6 8.7

Bar-Rust 239 119Epoxy Mastic - Surface Tolerant - Aluminum Filled

1.8.1 2.12.1 2.13.1 3.5.1

Catha-Coat 302H 282Epoxy - Zinc-Rich 3.2

Silicone Alkyd 1.2

Catha-Coat 304V 336Self-Cured Inorganic Zinc - Solvent Reducible

1.3 2.4 2.5 2.6 3.1

Catha-Coat 305 0Self-Cured Inorganic Zinc - Water Reducible

1.3.1 3.1.1


8.10

Catha-Coat 313 282Zinc-Rich - Galvanizing Repair






Devchem 253 213Nonreinforced Thin FilmEpoxy - Phenolic 8.8 8.9

Nonreinforced Thin FilmEpoxy Novolac 8.5

Devclad 182 1Asbestos Free (Trowel)Splash Zone Coating 4.1.1

Devgrip 237C 340Epoxy Non-Skid 4.6

Devguard 4160 419Alkyd - Inhibited 1.1 2.1 2.2


Devguard 4308 428Alkyd EnamelAlkyd Enamel 2.1 2.2 2.8 2.9

Devguard 4348 340Alkyd Enamel 2.1 2.2 2.8

Alkyd Enamel

Devmat 110 39LaminateEpoxy - Amine Adduct 10.1 10.2 10.4 10.5 10.6 10.7

10.8 10.9

Reinforced Glass FlakeEpoxy - Amine Adduct 9.1 9.2 9.4 9.5 9.6 9.79.8 9.9

Devran 142S 21Rivet and Seam Sealer (Trowel)

Epoxy 13.2

Devran 224 Aluminum 212Epoxy Mastic - Surface Tolerant - Aluminum Filled

2.15.1

Devran 224HS 212Epoxy - Polyamide 1.4 2.12 2.12.1 2.14

High BuildEpoxy - Polyamide 2.6 2.13 2.13.1 3.1 3.1.1 3.2

3.5 3.5.1 3.7 4.4

Epoxy Mastic - Surface Tolerant 2.12 2.15 3.5

Devthane 379 311Polyurethane - Aliphatic 2.15 2.15.1 3.1 3.1.1 3.2 3.5

3.5.1 3.7 3.8 4.4 4.6

HT-12 572Silicone - High Temp 2.4 2.7 2.11






HT-4 548Silicone Acrylic 2.3 2.5 2.10

HT-403 217Epoxy - Phenolic 12.1 12.4

HT-8 433Silicone Alkyd 2.3

Vy-Kote 443 740Butyral Wash PrimerVinyl 1.7

Dudick

Caulk 149 0Polysulfide Flexible Putty 13.5

Primer 67 0Epoxy - Amine Adduct 1.5

Protecto-Coat 500 250Polyester Non-Skid 4.5

Protecto-Coat 600 0LaminatePolyester 10.1

Protecto-Coat 800 0LaminateVinyl Ester 10.2 10.4 10.5 10.6 10.7 10.8

10.9

Reinforced Glass FlakeVinyl Ester 9.3 9.7 9.8

Protecto-Coat 900 0Reinforced Glass FlakeVinyl Ester 9.9

Protecto-Coat 900HT 0Reinforced Glass FlakeVinyl Ester 9.1 9.4 9.5 9.9

Protecto-Crete 110 108Epoxy Novolac 20.3

Protecto-Flake 800 0Reinforced Glass FlakeVinyl Ester 9.2 9.4 9.6

Protecto-Line 100 0Epoxy - Amine Adduct 20.1 20.2

Glidden

Glidflake 7500 250Polyester Non-Skid 4.5







55 Series 372Polyurethane - Aliphatic 2.15 2.15.1 3.1 3.1.1 3.2 3.5

3.5.1 3.7 3.8 4.4 4.6

5690 400Silicone - High Temp 2.4 2.7 2.11

5691 586Silicone - High Temp 2.4 2.7 2.11

5694 415Silicone Acrylic 2.3 2.5 2.10

Alkyd Enamel 538U 397Silicone Alkyd

Galvosil 1562 0Self-Cured Inorganic Zinc - Water Reducible

1.3.1 3.1.1


8.10

Galvosil 1568 320Self-Cured Inorganic Zinc - Solvent Reducible

3.1 3.3


1.3 2.5 2.6


1.3 2.4 2.5 2.6 3.1 3.3

Hempadur 350Epoxy Non-Skid 4.6

Hempadur 1530 417Epoxy - Phenolic 12.4

Hempadur 1550 320Epoxy - Phenolic 11.2 11.4 11.5 11.6

Nonreinforced Thin FilmEpoxy - Phenolic 8.2 8.8 8.9 8.11

Hempadur 1554 325Epoxy - Phenolic 12.1

Hempadur 1736 337Epoxy - Zinc-Rich 3.2

Hempadur 1763 255Nonreinforced Thin FilmEpoxy 8.1 8.4 8.7






Hempadur 3553 0Epoxy - Amine Adduct 1.5

Hempadur 3573 82Nonreinforced Thin FilmEpoxy 8.3

Hempadur 4515 180Epoxy Mastic - Surface Tolerant 1.5

Hempadur 4520 400Epoxy - Polyamide 2.12 2.12.1 2.14

High BuildEpoxy - Polyamide 2.6 2.13 2.13.1 3.1 3.1.1 3.23.5 3.5.1 3.7

Hempadur 4563 207Epoxy - Polyamide 1.4

Hempadur 45880 215Nonreinforced Thin FilmEpoxy 8.6

Epoxy - Polyamide 1.4 2.12 2.12.1 2.14

High BuildEpoxy - Polyamide 2.6 2.13 2.13.1 3.1 3.1.1 3.2

3.5 3.7 4.4

Epoxy Mastic - Surface Tolerant 1.8 2.12 2.13 2.15 3.5

Hempadur 45880-19870 215Epoxy Mastic - Surface Tolerant - Aluminum Filled

2.12.1 2.13.1 2.15.1 3.5.1

Hempadur 4588-1987 215Epoxy Mastic - Surface Tolerant - Aluminum Filled

1.8.1

Hempadur 5540 285High BuildEpoxy - Polyamide 3.5.1 4.4

Hempadur 8567.1 320Nonreinforced Thin FilmEpoxy 8.5

Hempalin Enamel 5214 410Alkyd Enamel 2.1 2.2 2.8 2.9

Hempalin Primer 1205 415Alkyd - Inhibited 1.1

Hempalin Primer 1218 330Alkyd - Inhibited 1.1 2.1 2.2

Hempanyl Hi-Build 4622 546High BuildVinyl 3.3

Hempanyl Primer 1606 685Vinyl 3.3






Hempathane 5595 332Polyurethane - Aliphatic 2.15 2.15.1 3.1 3.1.1 3.2 3.5

3.5.1 3.7 3.8 4.4 4.6

Hemucryl TI-Coat 1820 140Butyral Wash PrimerVinyl 1.7

Polyester GF 35920 35Polyester Non-Skid 4.5

Spray Guard 3549 0(Spray)Splash Zone Coating 4.1

Uni-Primer 1314 520Universal Primer 3.7 3.8

Zinc Primer 1649 593Zinc-Rich - Galvanizing Repair 1.6

Industrial Environmental Coatings

EC 376 F 36Reinforced Glass FlakeEpoxy 9.1 9.2 9.4 9.5 9.6 9.7

9.8 9.9

International

EA-1008H/EA2008H 0Polysulfide Flexible Putty 13.5

EEAA112/EEAA113 0Rivet and Seam Sealer (Trowel)

Epoxy 13.2

Intercure 200 320Epoxy - Polyamide 4.4

Intergard 251 390Epoxy - Polyamide 4.4

Intergard 401 64Epoxy - Polyamide 2.14

High BuildEpoxy - Polyamide 3.2

Intergard 475 HS 175High BuildEpoxy - Polyamide 3.1 3.1.1 3.2 4.4

Intergard270 95Epoxy - Polyamide 2.14

Interlac 260 300Alkyd - Inhibited 1.1 2.1 2.2






Interlac 665 427Alkyd Enamel 2.1 2.2 2.8 2.9

Interlac 800 333Silicone Alkyd

Interline 33SF 0Rivet and Seam Sealer (Trowel)

Vinyl Ester 13.4

Interline 359 320Nonreinforced Thin FilmEpoxy - Polyamide 8.2

Interline 850 225Nonreinforced Thin FilmEpoxy - Amine Adduct 8.1 8.3

Nonreinforced Thin FilmEpoxy - Phenolic 8.4 8.7 8.8 8.9 8.11

Nonreinforced Thin FilmEpoxy - Polyamide 8.5 8.6

Interline 910 0LaminateVinyl Ester 10.7

Interline 955 35Reinforced Glass FlakeVinyl Ester 9.2 9.8 9.9

Interline 985 0LaminateEpoxy - Phenolic 10.1

LaminateVinyl Ester 10.4 10.5 10.6

Interline 995 0LaminateVinyl Ester 10.2 10.8 10.9

Interline THA-007 0Rivet and Seam Sealer (Spray)Epoxy 13.1

Interprime 198 509Alkyd - Inhibited 2.1 2.2

Alkyd - Inhibited

Interprime 519 702Butyral Wash PrimerVinyl 1.7

Interseal 670 HS 240Nonreinforced Thin FilmEpoxy - Amine Adduct 8.5

Nonreinforced Thin FilmEpoxy - Amine Adduct 8.5 8.6

Epoxy - PolyamideEpoxy - PolyamideEpoxy - Polyamide 2.14

High BuildEpoxy - Polyamide 2.13 2.13.1 3.5 3.5.1 3.7

Epoxy Mastic - Surface Tolerant 2.12 2.13 2.15 3.5

Epoxy Mastic - Surface Tolerant 1.8







2.12.1 2.13.1 2.15.1 3.5.1


1.8.1


Interthane 990 395Polyurethane - Aliphatic 2.15.1 3.1 3.2 3.5.1 3.7 3.8

4.4 4.6


Interthane 990HS 332Polyurethane - Aliphatic 2.15 2.15.1 3.1 3.1.1 3.2 3.5

3.5.1 3.7 3.8 4.4 4.6

Intertherm 228 326Coal TarEpoxy - Amine Adduct 12.1 12.4

Intertherm 50 495Silicone - High Temp 2.7 2.11

Silicone - High TempIntertherm 715 550Temperature-Indicating Paint 1.9

Intertherm 875 562Silicone Acrylic 2.5 2.10

Silicone Alkyd

Interzinc 22 490Self-Cured Inorganic Zinc - Solvent Reducible

1.3 2.5 3.1



8.10

Interzinc 22HS 340Self-Cured Inorganic Zinc - Solvent Reducible

2.5 3.1



8.10

Interzinc 280 100Epoxy - Zinc-Rich 3.2


Interzinc 52 336Epoxy - Zinc-Rich 3.2







Interzinc 685 0Self-Cured Inorganic Zinc - Water Reducible

3.1.1

Self-Cured Inorganic Zinc - Water Reducible

Interzone 1000 85Reinforced Glass FlakeEpoxy 9.1

Reinforced Glass FlakeVinyl Ester 9.4 9.5 9.6 9.7

Interzone 2000 35Polyester Non-Skid 4.5

Polyester Non-Skid

Interzone 485 74(Spray)Splash Zone Coating 4.1 4.1.1

Interzone 954 130Epoxy Non-Skid 4.6

Jotun Paints

37-F-209 492Silicone Acrylic 2.5

Aluminum Paint HR 400Silicone AlkydBaltoflake 75

Reinforced Glass FlakePolyester - Isophthalic 9.3

Polyester Non-Skid

Baltoflake with Carborex 20 75Polyester Non-Skid

Barrier 294Epoxy - Zinc-Rich 3.2

Epoxy - Zinc-RichZinc-Rich - Galvanizing Repair 1.6

Cromoprimer 400Alkyd - Inhibited 1.1 2.1 2.2

Hardtop HB 256Polyurethane - Aliphatic 2.15 2.15.1 3.1 3.1.1 3.2 3.5

3.5.1 3.7 3.8 4.4 4.6

Jotacote 5 0Self-Cured Inorganic Zinc - Water Reducible

1.3.1 3.1.1






Jotamastic 87 196Epoxy - Polyamide 2.14

Epoxy Mastic - Surface Tolerant 1.8 2.12 2.13 2.15 3.5

Jotamastic 87 AL 110Epoxy Mastic - Surface Tolerant - Aluminum Filled

1.8.1 2.12.1 2.13.1 2.15.1 3.5.1

Nonreinforced Thin FilmEpoxy Mastic - Surface Tolerant - Aluminum Filled

8.4

Marathon IQ GF 30Reinforced Glass FlakeEpoxy 9.1 9.2 9.4 9.5 9.6 9.7

9.8 9.9

(Spray)Splash Zone Coating 4.1 4.1.1

Penguard HB 380Epoxy - Polyamide 1.4

High BuildEpoxy - Polyamide 2.6 3.1.1 3.2 3.5 3.5.1 3.74.4


Penguard Tiecoat 100 480High BuildEpoxy - Polyamide 3.1

Penguard Topcoat 400Epoxy - Polyamide 2.12 2.12.1 2.14


Pilot II 418Alkyd Enamel 2.1 2.2 2.8 2.9

Pioner TC 565High BuildVinyl 3.3 3.4

Primastic 238High BuildEpoxy - Polyamide 2.13.1

Primastic with 3883 Non-Skid aggregate 238Epoxy Non-Skid 4.6

Resist 78 465Self-Cured Inorganic Zinc - Solvent Reducible

2.6 3.1

Resist 86 455Self-Cured Inorganic Zinc - Solvent ReducibleResist GTI 458Self-Cured Inorganic Zinc - Solvent Reducible

1.3 2.4 2.5







8.10 8.11

Solvalitt 497Silicone - High Temp 2.4 2.7 2.11

Silicone AcrylicSilicone Acrylic 2.10

Tankguard Aqua 10Nonreinforced Thin FilmEpoxy - Phenolic 8.3

Tankguard HB 390Epoxy - Amine Adduct

Tankguard Storage 323Epoxy - Phenolic

Nonreinforced Thin FilmEpoxy - Phenolic 8.1 8.2 8.5 8.6 8.7 8.8

8.9

Vinylguard Silvergray 88 531Vinyl

High BuildVinyl 3.4

Washprimer 708Butyral Wash PrimerVinyl 1.7


AEP 20 0Epoxy - Amine Adduct 20.1 20.2

EN 250 0Epoxy Novolac 20.3

Mark Tool

Splashtron 0Vulcanized Neoprene 4.3

Master Builders, Inc

Ceilguard 663 0Epoxy - Amine Adduct 20.2

Flakeline 680 0Epoxy - Amine Adduct 20.1 20.3

P.R.C.

PR-6422 (Class B) 0Polysulfide Flexible Putty 13.5

PPG Industries

7-282 336Alkyd Enamel 2.1 2.2 2.8 2.9






7-852 Series Industrial Primers 376Alkyd - Inhibited 2.1 2.2

90000/90002 420Polyester Non-Skid

94301 335Reinforced Glass FlakeVinyl Ester 9.5

94301** 335Glass Flake (Spray)Vinyl Ester 8.11

94301, VOC 334Reinforced Glass FlakeVinyl Ester 9.1 9.2 9.4 9.5 9.6 9.8

9.9

94701, VOC 337Polyester Non-Skid

95-132 304Nonreinforced Thin FilmEpoxy - Polyamide 8.3

95-267** 336Nonreinforced Thin FilmEpoxy - Phenolic 8.11

95-812 241Polyurethane - Aliphatic 2.15 3.2 3.5 3.5.1 3.7 3.8

4.4 4.6

95-8512 0Polyurethane - Aliphatic 2.15.1 3.1

97-145 128Epoxy - Polyamide 2.14

Epoxy Mastic - Surface Tolerant 1.4 1.8 2.12 2.13 2.14 2.153.5 4.4

Epoxy Non-Skid

97-148 0High BuildEpoxy - Polyamide 3.1


2.15.1

97-160 150Nonreinforced Thin FilmEpoxy - Amine Adduct 8.6 8.7 8.8 8.9

Nonreinforced Thin FilmEpoxy - Polyamide 8.2

97-350 Series 613High BuildVinyl 3.3 3.4

97-480 414Silicone Alkyd 1.2






97-680 414Universal Primer 3.7 3.8

97-687/688 Polyclutch Wash Primer 742Butyral Wash PrimerVinyl 1.7

97-710 568Silicone Acrylic 2.3 2.5 2.10

97-724 554Silicone - High Temp 2.4 2.7 2.11

97-946 262Nonreinforced Thin FilmEpoxy 8.1

Epoxy - Phenolic 12.1 12.4

Nonreinforced Thin FilmEpoxy - Polyamide 8.4 8.5

Aquapon 97-130 373Epoxy - Polyamide 2.12 2.12.1

High BuildEpoxy - Polyamide 2.6 2.13 2.13.1 3.2 3.5 3.5.1

3.7 4.4

Aquapon High Build with Grit 373Epoxy Non-Skid 4.6

Aquapon Zinc Rich 97-670 403Epoxy - Zinc-Rich 3.2 3.4

Metalhide 1001 Primer 97-673/97-674 397Self-Cured Inorganic Zinc - Solvent Reducible

1.3 2.4 2.5 2.6 3.1 3.3


8.10

Pitt-Therm 97-724 0Silicone - High Temp

UC46654 554Silicone Alkyd 2.3

UC59633/97-139 342Epoxy - Amine Adduct 1.5

UC65147/97-674 336Zinc-Rich - Galvanizing RepairUC65372/UC65373 118Epoxy Mastic - Surface Tolerant - Aluminum Filled

1.8.1 2.12.1 2.13.1 3.5.1

Vinyl Primer and 97-349 702Vinyl 3.3






Reichold

Atlac 580 0LaminateVinyl Ester 10.2 10.4 10.5 10.6 10.7

Dion Iso 6631T 0LaminatePolyester - Isophthalic 10.1

Reliance

Rel-Zone 7815 0Asbestos Free (Trowel)Splash Zone Coating 4.1.1

Sauereisen

ConoGlaze 202 15Epoxy - Amine Adduct 20.2

FibreCrete 204 16Epoxy - Amine Adduct 20.1 20.3

Sherwin Williams

920-W-974 2Rivet and Seam Sealer (Spray)Epoxy 13.1

920-W-979 2Rivet and Seam Sealer (Trowel)

Epoxy 13.2

Rivet and Seam Sealer (Spray)Polyester - Isophthalic 13.3

970-B-703 40Rivet and Seam Sealer (Spray)Polyester - Isophthalic 13.3

ArmorSeal 300 340Epoxy Non-Skid 4.6

Cor-Cast TF-VE 228Reinforced Glass FlakeVinyl Ester 9.2 9.3 9.4 9.6

Cor-Cote FC-VE 228Reinforced Glass FlakeVinyl Ester 9.7 9.8

Cor-Cote FC-VEN 228Reinforced Glass FlakeVinyl Ester 9.5 9.9

Coroplate I 948-W-016/531-0-006 240Reinforced Glass FlakePolyester - Isophthalic 9.1

Polyester Non-Skid 4.5

DTM Wash Primer B71Y1 143Butyral Wash PrimerVinyl 1.7

Dura-Plate 235 B67-235 Series B67/V235 272Epoxy Mastic - Surface Tolerant 1.8 2.12 2.13 2.15 3.5






Epo-Phen B62A55/B62V55 264Epoxy - Phenolic 12.1 12.4

Epoxy Mastic Aluminum II B62S100/BV100 171Epoxy Mastic - Surface Tolerant - Aluminum Filled

1.8.1 2.12.1 2.13.1 2.15.1 3.5.1

Hi-Solids Alkyd Metal Primer B50NZ2 308Alkyd - Inhibited 1.1 2.1 2.2

Hi-Solids Alkyd Metal Primer B50NZ3 308Universal Primer 3.7 3.8

Hi-Solids Polyurethane B65-300 SeriesB65/V30 289Polyurethane - Aliphatic 2.15 2.15.1 3.1 3.1.1 3.2 3.5

3.5.1 3.7 3.8 4.4 4.6

Hi-Temp Aluminum 100-A-518 420Self-Cured Inorganic Zinc - Solvent Reducible

2.7

Silicone - High Temp 2.4 2.7 2.11

Industrial Enamel B54Z Series 417Alkyd Enamel 2.1 2.2 2.8 2.9

Industrial Enamel VOC B54-Z Series 309Alkyd Enamel 2.1 2.2 2.8 2.9

Kem Hi-Temp 850 Series 550Silicone Alkyd 1.2

Kem Kromik B50NZ6 415Universal Primer 3.7 3.8

Macropoxy 646 B58-600 Series/B68V600 235High BuildEpoxy - Polyamide 2.6 3.1 3.1.1 3.2 3.5 3.5.1

3.7 4.4

Magnaplate VE Laminate 939X465/531-0-006 40LaminateVinyl Ester 10.2 10.4 10.5 10.6 10.7 10.8

10.9


Vinyl Ester 13.4

Phenicon HS 920-W-A11/700-C-685 230Epoxy - Amine Adduct 1.5

Nonreinforced Thin FilmEpoxy - Amine Adduct 8.7

Nonreinforced Thin FilmEpoxy - Phenolic 8.2 8.4 8.5 8.6 8.8 8.98.11






Phenicon HS Flake Filled 920-R-A11/700-C-685 230Nonreinforced Thin FilmEpoxy - Phenolic 8.9

Poly-Glass Laminate 939 Series/531-0-006 40LaminatePolyester 10.1

Silicone - High Temp 2.11

Recoatable Epoxy Primer B67R5/B67V5 295Epoxy - Polyamide 1.4 2.14 4.4

Sher-Tile B-67-200 Series/B67V200 175Epoxy - Polyamide 2.12 2.12.1

High BuildEpoxy - Polyamide 2.13 2.13.1

Tank Clad HS B62W80 177Nonreinforced Thin FilmEpoxy - Polyamide 8.1 8.3

Thermo-Cure B59A380 376Silicone Acrylic 2.3 2.5 2.10

Silicone Alkyd 2.3

Tile-Clad II Plus B62-500 Series/B62V500 275Epoxy - Polyamide 2.12 2.12.1

Zinc Clad 5 B69A45 488Zinc-Rich - Galvanizing Repair 1.6

Zinc Clad II B69V3/B69D11 462Self-Cured Inorganic Zinc - Solvent Reducible

1.3 2.4 2.5 2.6 3.1

Zinc Clad II HS B69VZ1/B69VZ3/B69D11 312Self-Cured Inorganic Zinc - Solvent Reducible

2.4 2.5 2.6 3.1


8.10

Zinc Clad IV B69A8/B69V8 308Epoxy - Zinc-Rich 3.2

Zinc Clad XI B69V11/B69D11 0Self-Cured Inorganic Zinc - Water Reducible

1.3.1 3.1.1

Sigma Coatings

Armour Compound 7490 0Epoxy - Amine Adduct

(Spray)Splash Zone Coating 4.1

CM II 7456 US 300Epoxy - Polyamide 2.12 2.12.1 2.14






High BuildEpoxy - Polyamide 2.6 2.13 2.13.1 3.2 3.5 3.5.1

3.7 4.4

EHB 7433 252Nonreinforced Thin FilmEpoxy - Amine Adduct 8.7

Novaguard 7453 25LaminateEpoxy - Phenolic 10.1 10.2 10.4 10.5 10.6 10.7

10.8 10.9

Novoguard Caulk 7498 25Rivet and Seam Sealer (Trowel)

Epoxy 13.2

Novoshield 7744 13Epoxy

Penetrating Sealer SF 8353 48EpoxySelf-Cured Inorganic Zinc - Solvent Reducible

1.3

Phenguard Finish 7436 300Nonreinforced Thin FilmEpoxy - Amine Adduct 8.2 8.4 8.5 8.6

Epoxy - Phenolic 11.2 11.4 11.5 11.6

Epoxy - PhenolicNonreinforced Thin FilmEpoxy - Phenolic 8.11

Phenguard Primer 7409 300Nonreinforced Thin FilmEpoxy - Amine Adduct 8.2 8.4 8.5 8.6

Epoxy - Phenolic 11.2 11.4 11.5 11.6

Epoxy - PhenolicNonreinforced Thin FilmEpoxy - Phenolic 8.11

Thin FilmEpoxy - Polyamide 12.1

Sigmacover CM Miocoat II 7427US 324Thin FilmEpoxy - Phenolic 12.4

Thin FilmEpoxy - Polyamide 12.1

Sigmacover Primer II 7413US 300Epoxy - PolyamideUniversal Primer 3.7 3.8

Sigmacover TCP 7476 240Nonreinforced Thin FilmEpoxy - Amine Adduct 8.1


Sigmacover Zinc Primer II 7402 US 312Epoxy - Zinc-Rich 3.2







Sigmadur HS Semigloss 7530 288Polyurethane - Aliphatic

Sigmadur Versafinish 5522 320Polyurethane - Aliphatic 2.15 2.15.1 3.1 3.1.1 3.2 3.5

3.5.1 3.7 3.8 4.4 4.6

SigmaGlaze 5492 0Epoxy Non-Skid 4.6

Sigmaguard CSF 7443 132Epoxy

Nonreinforced Thin FilmEpoxy 8.7 8.9

Rivet and Seam Sealer (Spray)Epoxy 13.1

Sigmaguard CSF 85 7785* 5Nonreinforced Thin FilmEpoxy - Polyamide 8.3

Sigmaguard CSF Glassflake 7954 612Reinforced Glass FlakeEpoxy 9.4 9.7 9.8 9.9

Reinforced Glass FlakeEpoxy - Amine Adduct 9.6

Reinforced Glass FlakeEpoxy - Phenolic 9.2 9.5

Reinforced Glass FlakeEpoxy - Polyamide 9.6

Sigmaguard CSF Glassflake 7954* 0Reinforced Glass FlakeEpoxy - Amine Adduct 9.1

Silicone Acrylic 2.10

Sigmaguard EHB 7433 252Nonreinforced Thin FilmEpoxy - Phenolic 8.2 8.4 8.5 8.6 8.8 8.9


Sigmaguard HSV 5476 156Nonreinforced Thin FilmEpoxy - Polyamide 8.3

Sigmarine BTD 7238 345Alkyd Enamel 2.1 2.2 2.8 2.9

Sigmarine Multiprimer 7117 390Alkyd - Inhibited

Sigmarine Primer ZP 7135 372Alkyd - Inhibited 1.1 2.1 2.2

Sigmarite PC Unicoat 5483 PC 252Epoxy - Polyamide 1.4 2.14 4.4

High BuildEpoxy - Polyamide 3.1 3.1.1

Sigmatherm Aluminum 5267 600Silicone - High Temp 2.4






Silguard MC II 7551 US 324Self-Cured Inorganic Zinc - Solvent Reducible

2.4 2.6 3.1


8.10

Silguard SC 7550 0Self-Cured Inorganic Zinc - Water ReducibleSelf-Cured Inorganic Zinc - Water Reducible

1.3.1

TCP 7476 224Epoxy Mastic - Surface Tolerant 1.5 1.8 2.12 2.13 2.15 3.5

TCP Aluminum 7477 240Epoxy Mastic - Surface Tolerant - Aluminum Filled

1.8.1 2.12.1 2.13.1 2.15.1 3.5.1

Sika Corporation

Sikagard 62 0Epoxy - Amine Adduct 20.1 20.2 20.3

Southern Coatings

94-258 Series 336Alkyd - Inhibited 1.1

Stonhard, Inc.

Stonchem 501 0Epoxy - Amine Adduct 20.2



Tempil

Temp-Alarm 126A 560Temperature-Indicating Paint 1.9

Tnemec Company

Azeron Primer FD88 330Alkyd - InhibitedAlkyd - Inhibited 2.1 2.2

Chembuild 135 133High BuildEpoxy - Polyamide 3.1 3.2 3.5 3.5.1

Epoxy Mastic - Surface Tolerant 2.12 2.13 2.15 3.5


1.8






Chembuild 135-1243 133Epoxy Mastic - Surface Tolerant - Aluminum Filled

1.8.1 2.12.1 2.13.1 2.15.1 3.5.1

Chem-Prime HS 37H 348Universal Primer 3.7 3.8

CRU 291 281Polyurethane - Aliphatic 4.6

Endura-Shield 74 229Polyurethane - Aliphatic 2.15 2.15.1 3.1 3.2 3.5 3.5.1

3.7 3.8 4.4

Endura-Shield 75 193Polyurethane - Aliphatic 2.15 2.15.1 3.1 3.2 3.5 3.5.1

3.7 3.8 4.4

Enduratone 23 341Alkyd Enamel 2.1 2.2 2.8 2.9

Hi-Build Epoxoline 66 362Epoxy - PolyamideEpoxy - Polyamide 2.12 2.12.1 2.14

Hi-Build Epoxoline II N69 253Epoxy - Polyamide 2.12 2.12.1 2.14


Nonreinforced Thin FilmEpoxy - Polyamide 8.2 8.4 8.5 8.6

Epoxy-Polyamine

Hi-Build Tneme-Gloss 2H 351Alkyd Enamel 2.1 2.2 2.8 2.9

Pota-Pox Plus N140 274Nonreinforced Thin FilmEpoxy - Polyamide 8.3

S.T. Typoxy N27 300Epoxy - Polyamide 4.4

Epoxy - PolyamideHigh BuildEpoxy - Polyamide 2.6 2.13 2.13.1 3.1 3.2 3.5

3.5.1 3.7 4.4


2.12 2.12.1

Silicone Aluminum 39-1061 587Silicone - High Temp 2.4 2.7 2.11

SpanPrime IOZ 356 397Self-Cured Inorganic Zinc - Solvent Reducible

1.3 2.4 2.6 3.1







8.10

Teneme-Zinc 90E-92 474Nonreinforced Thin FilmSelf-Cured Inorganic Zinc -

Solvent Reducible8.10

Tneme-Glaze 280 2Epoxy Non-Skid 4.6

Tneme-Liner 61 169Nonreinforced Thin FilmEpoxy - Amine Adduct 8.2 8.4 8.5 8.6 8.7 8.8

8.9

Tneme-Zinc 90-96 323Self-Cured Inorganic Zinc - Solvent Reducible

1.3 2.4 2.6 3.1

Tneme-Zinc 90-97 320Epoxy - Zinc-Rich 3.2


Versare Primer 4 342Alkyd - Inhibited 2.1 2.2

Alkyd - Inhibited



docslidchevron-texaco coating manuale.us chevron standard for painting.pdf

Documents