dock de-icer - install guide
TRANSCRIPT
Step 2: Install De-‐icer 1. Securely ?e to cleat or other fastening point
at both ends as shown.
2. Lower de-‐icer into the water ensuring one foot clearance from the boEom of the lake.
2
1
Step 3: Plug in the Power Cable 1. Plug power cable into GFCI protected
receptacle and enjoy the inexpensive insurance Arbrux De-‐icers provide for your docks & boathouses.
1
WOW! You did it.
Share your DIY WOW! Take a picture or video and submit your Talent HERE!
If you have problems with your install call us at: 1-‐888-‐211-‐3548