doc technique pm500me eng print - drasar.cz · phglxp ordgv xs wr .j pd[ lq rughu preparation, in...
TRANSCRIPT
PM500ME SERIETECHNICAL DOCUMENTATION
2PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
PM500ME SERIE
1 - Presentation of the PowerMoller product range Page 3 2 - Presentation of the series Page 4 Structure and description Applications General characteristics3 - Transfer capacity Page 8 Speed according to the weight and type of load being conveyed Stopping distance according to the weight and type of load being conveyed 4 - Technical datas according to speed code Page 10
6 - Dimensional characteristics Page 13 Grooved tube - M8 female threaded shaft with screw on free end
Roller with pulley for ribbed belt- M8 female threaded shaft with screw on free end
Roller with pulley for round belt - M8 female threaded shaft with screw on free end
Roller without drive - M8 female threaded shaft with screw on free end7 - Dimensional characteristics - curve Page 21 Conical roller with grooved tube - Ri = 800mm Conical roller with pulley for ribbed belt - Ri = 800mm Conical roller with pulley for round belt - Ri = 800mm Conical roller with grooved tube - Ri = 850mm Conical roller with pulley for ribbed belt - Ri = 850mm Conical roller with pulley for round belt - Ri = 850mm8 - Dimensional characteristics - miscellaneous Page 27 PVC sleeve9 - Mounted on the frames Page 28
10 - Wiring and commands Page 30 Wiring Interface scheme Pin 1 and 3 - 24VDC power supply Pin 2 - Rotation direction Pin 4 - Start / Stop Pin 5 - Speed variation
11 - Protections Page 33 Contre la sous-alimentation Contre la tension induite Protection thermique Contre le blocage
12 - Accessories Page 36 Ribbed belts Rounded belts
Speed adaptator 24VDC power supply
Round label Square label
SUMMARY
3PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
1 - PRESENTATION OF THE POWER MOLLER® PRODUCT RANGE
Standard circuit board
ZPA circuit board
HB510 HB510B
Externalcircuit board
Integratedcircuit board
CB018
CB016 CB016B
CB030
CBM-105
Corresponding circuit board
Max load to be conveyed
Mechanical brake version
Module circuit board
HBR-605
90° transfer
F-RAT-S
POP-UP CBM-105CBR-306
HBK-608
45° transfer
DC Brushless
Ø50
PM500 ME
PM500 XE
Ø60,5
PM605 XE
B&W AS-i 3.0WenglorMolex
B&W AS-i 3.0WenglorMolex
B&W AS-i 3.0Wenglor
PM500 XK
PM500 XC
PEPPERL-FUCHSAS-Interface
PEPPERL-FUCHSAS-Interface
Ø32
Ø50
Ø60,5
PM320 HS CB018
PM500 FECBM-105
HB510IB-E
PM500 FE-B CB016BHB510B
PM605 FE
PM605 FE-B CB016BHB510B
PM605 KT CB030HBK-608
CBM-105HB510IB-E
HBR-605CBM-105CBR-306
Network controller
IB-E
IB-P
PM500 VE IB-P
PM605 VE IB-P
PM500 XPB&W AS-i 3.0
WenglorMolex
PM605 XPB&W AS-i 3.0
WenglorMolex
B
B
Compatible module / sensor
CBR-306
4PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
PM500ME SERIE
The brushless motorized roller PM500ME has the circuit board and gear-motor integrated withinthe roller allowing a good tightness, easy wiring with M8-5pins connector and space saving.
integrated ZPA from Wenglor, etc...It is designed for conveyor lines of light and
preparation, in distribution, and for assembly lines. The PM500ME motorized roller is very quiet and the economical solution to answer to the most logistical needs for light loads.
in «ZPA» involving the AS-Interface module
2 - PRESENTATION OF THE SERIES
Motorized roller
Free roller
Sensor
AS-Interface cable
Power supply cable
SERIRRIRRIRRRRRRRRRRIRRRIRRRRRRRRIRRRIRRIRRRRR EEEEEEEEPPPPPPPPPPPPPPPPPPPOctopus AS-i 3.0 Motor Module
connectors. Each sensor controls the motorized roller and manages the ZPA flow.
Optoelectric sensor
5PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
Structure and description
Shaft at free end
Tube Endcaps with doublebearing at motor end
Shaftat motor end
Cable and M8 connector
Motor Noise absorberPlanetary gear unitEndcap with double
bearing at free end
Applications
STOPSTOP
Zero pressure 90° transfer Curve
Gate Acceleration / Decelaration
Platine de commande
Jogging
6PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
PM500ME SERIE
ELEC
TRO
MEC
AN
ICA
L
Direct current and brushless 24 VDC
CurrentNominal 1,2A at 80m/minStarting 2,0A
Nominal power 20W at 80m/minIsolation class E
Operation at 40°C
Continuous 100%
Intermittent
BrakeCable lenght and typeProtection index IP54
Protection
Against overload by integrated thermistor
Current limitation within the circuit boardIntegrated fuse 8A
Protection against under supplyProtection against induced voltageProtection against electrostatic charge
Environment
Sound levelSpeed code (m/min) 7,5 ~ 78,5Reduction ratio 1/10,8
CONT
ROL
Integrated circuit board functions Constant torque speed variation
resistor.Acceleration time 0,3s
General characteristics
7PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
motor side :
Set screw
free side :
Tube :
Ribbed
Tapered
Grooves
PVC
Pulleys :
Sleeve :
Grooves
Grooves :
• Heat-treated and phosphated steel shaft
Anti-static
threaded flat metal strip• Heat-treated and phosphated steel shaft
• Ribbed belts,8 teeth, PVC• Round belts, diam. 4 or 5 mm with smooth
MÉC
AN
IQU
E • Steel tube Ø OUTER DIAM 50mm• Zinc-coated or stainless steel
• Grooves in different positions from 33 to 300 mm from the edgeof the tube• Depth 5,8mm• Rounded belts Ø 4 or 5 mm
Zinc plated steel
8PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
PM500ME SERIE
3 - TRANSFER CAPACITY
Speed according to the weight and type of load being conveyed
Cardboard box
75mm itch, 8 free rollers driven by one PM500ME drive roller - 80m/min
DRIVEN BY ROUND BELTS Ø5MM
Speed
80m/min60m/min40m/min7,5m/min
Plastic box
80m/min60m/min40m/min7,5m/min
Speed
Cardboard box
DRIVEN BY RIBBED BELTS 3 RIBS
Speed
80m/min60m/min40m/min7,5m/min
Plastic box
80m/min60m/min40m/min7,5m/min
Speed
9PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
Stopping distance according to the weight and type of load being conveyed
DRIVEN BY ROUND BELTS Ø5MM
DRIVEN BY RIBBED BELTS 3 DENTS
S
Stopping distance
Stopping distance
75mm itch, 8 free rollers driven by one PM500ME drive roller - 80m/min
Cardboard box
80m/min60m/min40m/min
Plastic box
80m/min60m/min40m/min
Stopping distance
Stopping distanceCardboard box
80m/min60m/min40m/min
Plastic box
80m/min60m/min40m/min
Stopping distance
These curves are given as a guide. Transfer capacity depends on the nature and quality of the transportedload, the belt tension, the quality of the bearings, the nature of the sleeves, the ambient temperature...
10PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
PM500ME SERIE
Current vs Tangential force
Area of continuousoperation
Speed vs Tangential force
Nominal speed
Real speed
Nominal Starting Nominal Starting No load Nominal Starting
80 9,3-10 80.8 10.3
55.9
0.30
1.6
0.61 1.20
2,0
70 8,5±0,2 6,2K 72.4 12.9 0.35 0.51 1.20
60 7,5±0,2 4,3K 61.2 14.8 0.37 0.31 1.20
50 6,5±0,2 3,3K 51.0 14.8 037 0.26 1.00
40 5,5±0,2 2,2K 40.8 18.4 0.46 0.21 0.90
30 4,5±0,2 1,8K 30.8 18.4 0.46 0.17 0.80
20 3,5±0,2 1,2K 20.3 22.0 0.55 0.12 0.70
15 2,5±0,2 0,75K 15.2 22.0 0.55 0.10 0.60
10 1,5±0,2 0,43K 10.2 22.7 0.60 0.09 0.50
7.5 0-0,9 7.7 22.7 0.60 0.08 0.50
4 - TECHNICAL DATAS ACCORDING TO SPEED CODE
Speed
11PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
5 - PRESENTATION OF THE DIFFERENT FIXING OPTIONS
FREE SIDE FIXING MOTOR SIDE FIXING
Ref : A-071-G / A-081-G(optional)
Threaded hexagonal shaft M12
Ref : P-0B1 / P-0C1(obligatory)
M8 x 14 screw(obligatory)
Plain hexagonal shaft 11,1mm
Ref : A-071-G / A-081-G(obligatory)
Ref : A-071-G / A-081-G(optional)
Ref : C-071 / C-081
(optional)
Threaded hexagonal shaft M12
Ref : P-0B1 / P-0C1(obligatory)
M8 x 14 screw(obligatory)
Plain hexagonal shaft 11,1mm
Ref : A-071-G / A-081-G(obligatory)
Ref : C-071 / C-081
(optional)
12PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
PM500ME SERIE
Note : Nut ref. FEY01 shouldbe used with the clawplate ref. P-0B1 orP-0C1.
Ref. C-071 Ref. C-081
Plate, screw, nut and spring washer are galvanized steel.
Ref. AM-M12-PC
2 nuts M5
2 spring washer M5
2 nuts M5
2 spring washer M5
2 nuts M5
2 spring washer M52 nuts M5
2 spring washer M5
13PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
PM500ME -
Dimensions PM500ME
Grooves position
Dimension (B) Tube length (L) Grooves for steel tubeDepth = 5,8mm
G0 mini G1 mini G2 mini G1 + G2 max
WEIGHT / STATIC LOAD / AXIAL FORCE
Tube length 300 400 500 600 700 800 900 1000Weight (Kg) 1,6 1,8 2,0 2,1 2,3 2,5 2,6 2,8
Static load (Kg) 65 55 45 35 30 25 20 20Axial force max (N) 290
6 - DIMENSIONAL CHARACTERISTICSGrooved tube - Hexagonal spring loaded shaft on free end
PM500ME -
For a single groove G2 = 0
14PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
PM500ME SERIE
PM500ME -
Dimensions PM500ME
Grooved tube - M8 female threaded shaft with screw on free end
PM500ME -
Vis M8
Vis M8
Grooves position
Dimension (B) Tube length (L) Grooves for steel tubeDepth = 5,8mm
G0 mini G1 mini G2 mini G1 + G2 max
WEIGHT / STATIC LOAD / AXIAL FORCE
Tube length 300 400 500 600 700 800 900 1000Weight (Kg) 1,6 1,8 2,0 2,1 2,3 2,5 2,6 2,8
Static load (Kg) 65 55 45 35 30 25 20 20Axial force max (N) 290
For a single groove G2 = 0
* Ajustable ±2mm
* Ajustable ±2mm
15PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
PM500ME -
Dimensions PM500ME
Dimension (B) Tube length (L)
Tube length 300 400 500 600 700 800 900 1000Weight (Kg) 1,7 1,9 2,0 2,2 2,4 2,5 2,7 2,9
Static load (Kg) 65 55 45 35 30 25 20 20Axial force max (N) 290
Roller with pulley for ribbed belt - Hexagonal spring loaded shaft on free end
WEIGHT / STATIC LOAD / AXIAL FORCE
PM500ME -
16PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
PM500ME SERIE
PM500ME -
Dimensions PM500ME
Dimension (B) Tube length (L)
Tube length 300 400 500 600 700 800 900 1000Weight (Kg) 1,7 1,9 2,0 2,2 2,4 2,5 2,7 2,9
Static load (Kg) 65 55 45 35 30 25 20 20Axial force max (N) 290
Roller with pulley for ribbed belt - M8 threaded shaft with screw on free end
WEIGHT / STATIC LOAD / AXIAL FORCE
Vis M8
PM500ME -
Vis M8
* Ajustable ±2mm
* Ajustable ±2mm
17PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
Roller with pulley for round belt - Hexagonal spring loaded shaft on free end
PM500ME -
Dimensions PM500ME
Dimension (B) Tube length (L)
WEIGHT / STATIC LOAD / AXIAL FORCE
Tube length 300 400 500 600 700 800 900 1000Weight (Kg) 1,7 1,9 2,0 2,2 2,3 2,5 2,7 2,8
Static load (Kg) 65 55 45 35 30 25 20 20Axial force max (N) 290
PM500ME -
18PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
PM500ME SERIE
Roller with pulley for round belt - M8 threaded shaft with screw on free end
PM500ME -
Dimensions PM500ME
Dimension (B) Tube length (L)
WEIGHT / STATIC LOAD / AXIAL FORCE
Tube length 300 400 500 600 700 800 900 1000Weight (Kg) 1,7 1,9 2,0 2,2 2,4 2,5 2,7 2,9
Static load (Kg) 65 55 45 35 30 25 20 20Axial force max (N) 290
PM500ME -
Vis M8
Vis M8
* Ajustable ±2mm
* Ajustable ±2mm
19PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
PM500ME -
Dimensions PM500ME
Dimension (B) Tube length (L)
Tube length 300 400 500 600 700 800 900 1000Weight (Kg) 1,6 1,8 2,0 2,1 2,3 2,5 2,6 2,8
Static load (Kg) 65 55 45 35 30 25 20 20Axial force max (N) 290
Roller without drive - Hexagonal spring loaded shaft on free end
WEIGHT / STATIC LOAD / AXIAL FORCE
PM500ME -
20PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
PM500ME SERIE
PM500ME -
Dimensions PM500ME
Dimension (B) Tube length (L)
Tube length 300 400 500 600 700 800 900 1000Weight (Kg) 1,6 1,8 2,0 2,1 2,3 2,5 2,6 2,8
Static load (Kg) 65 55 45 35 30 25 20 20Effort axial (max N) 290
Roller without drive - M8 threaded shaft with screw on free end
WEIGHT / STATIC LOAD / AXIAL FORCE
Vis M8
PM500ME -
Vis M8
* Ajustable ±2mm
* Ajustable ±2mm
21PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
PM500ME -
7 - DIMENSIONAL CHARACTERISTICS - CURVE
Dimensions PM500ME - Inner radius of curvature : 800mm
Grooves positionDimension (B) Tube length (L) Grooves for steel tube
Depth = 5,8mm Tapered sleeve
length (l)G0 mini
G1 mini
G2 mini
G1 + G2 max
200, 300, 400, 500, 600, 700, 800, 900
Sleeve length 200 300 400 500 600 700 800 900Additional weight (kg) 0,1 0,2 0,3 0,4 0,5 0,6 0,8 0,9
Max load to be conveyed (kg) 50
ADDITIONAL WEIGHT
Conical roller with grooved tube - Ri = 800mm
*2 I 200 300 400 500 600 700 800
D 65 71.2 77.6 84 90.4 96.8 103.2
d 52.5
For a single groove G2 = 0
22PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
PM500ME SERIE
PM500ME -
Dimension (B) Tube length (L) Tapered sleeve length (l)
200, 300, 400, 500, 600, 700, 800, 900
Dimensions PM500ME - Inner radius of curvature : 800mm
Sleeve length 200 300 400 500 600 700 800 900Additional weight (kg) 0,1 0,2 0,3 0,4 0,5 0,6 0,8 0,9
Max load to be conveyed (kg) 50
ADDITIONAL WEIGHT
Conical roller with pulley for ribbed belt - Ri = 800mm
*2 I 200 300 400 500 600 700 800
D 65 71.2 77.6 84 90.4 96.8 103.2
d 52.5
23PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
PM500ME -
Dimension (B) Tube length (L) Tapered sleeve length (l)
200, 300, 400, 500, 600, 700, 800, 900
Dimensions PM500ME - Inner radius of curvature (Ri) : 800 mm
Sleeve length 200 300 400 500 600 700 800 900Additional weight (kg) 0,1 0,2 0,3 0,4 0,5 0,6 0,8 0,9
Max load to be conveyed (kg) 50
ADDITIONAL WEIGHT
Conical roller with pulley for round belt - Ri = 800mm
*2 I 200 300 400 500 600 700 800
D 65 71.2 77.6 84 90.4 96.8 103.2
d 52.5
24PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
PM500ME SERIE
PM500ME -
Dimensions PM500ME - Inner radius of curvature : 850mm
Conical roller with grooved tube - Ri = 850mm
*2 I 150 250 350 450 550 650 750
D 65 71.2 77.6 84 90.4 96.8 103.2
d 55.6
Dimension (B) Tube length (L) Tapered sleeve length (l)
150, 250, 350, 450, 550, 650, 750, 850
Sleeve length 150 250 350 450 550 650 750 850Additional weight (kg) 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,9
Max load to be conveyed (kg) 50
ADDITIONAL WEIGHT
25PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
PM500ME -
Dimension (B) Tube length (L) Tapered sleeve length (l)
150, 250, 350, 450, 550, 650, 750, 850
Dimensions PM500ME - Inner radius of curvature : 850mm
Sleeve length 150 250 350 450 550 650 750 850Additional weight (kg) 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,9
Max load to be conveyed (kg) 50
ADDITIONAL WEIGHT
Conical roller with pulley for ribbed belt - Ri = 850mm
*2 I 150 250 350 450 550 650 750
D 65 71.2 77.6 84 90.4 96.8 103.2
d 55.6
26PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
PM500ME SERIE
PM500ME -
Dimension (B) Tube length (L) Tapered sleeve length (l)
150, 250, 350, 450, 550, 650, 750, 850
Dimensions PM500ME - Inner radius of curvature (Ri) : 850 mm
Sleeve length 150 250 350 450 550 650 750 850Additional weight (kg) 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,9
Max load to be conveyed (kg) 50
ADDITIONAL WEIGHT
Conical roller with pulley for round belt - Ri = 850mm
*2 I 150 250 350 450 550 650 750
D 65 71.2 77.6 84 90.4 96.8 103.2
d 55.6
27PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
8 - DIMENSIONAL CHARACTERITICS - MISCELLANEOUS
PVC sleeve
Sleeved by compressed air
Thickness (mm) L (mm) Ø (mm) D (mm) Hardness
250
54 ~58 shore A3 56
Thickness (mm) L (mm) Ø (mm) D (mm) SL (mm)
250
5410
3 56
Cylindrical tube
Grooves tube
28PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
PM500ME SERIE
9 - MOUNTING ON THE FRAMES
Mounting plate for plain 11.1 mm hexagonal shaft - FLAT ON TOP
Mounting plate for plain 11.1 mm hexagonal shaft - ANGLE ON TOP
Conveyor with hole Ø12,1mm
Conveyor with hole Ø12,1mm
PlateReference A-071-G
PlateReference A-081-G
PlateReference C-081
PlateReference C-071
*2 *1
Tightening Torque*1 - 6-10 Nm*2 - 3.5 Nm
*2 *1
Tightening Torque*1 - 6-10 Nm*2 - 3.5 Nm
29PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
Mouting plate for threaded hexagonal shaft - FLAT ON TOP
Mouting plate for threaded hexagonal shaft - ANGLE ON TOP
Conveyor with hole Ø12,1mm
Claw plate NutReference
Conveyor with hole Ø12,1mm
Claw plate NutReference P-0C1
Conveyor with holes ø8,4mm
BoltReference SP-M8-14
33
4049
Ø12.8
10 221.
5
3
11.1
18,7521
,56,82
33
4049
Ø12
.8
10 221.
5
311.1
18,75
21,5
6,82
30PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
PM500ME SERIE
10 - WIRING AND COMMANDS
(a)
P1 24 VDCP2 CW/CCW WhiteP3 0 VDCP4 Start/StopP5 Speed variation Grey
Wiring
Interface scheme
0
Pin 1 and 3 - 24VDC power supplyThe motorized roller is protected against reverse polarity 0 to 24 VDC.
It is recommended that a 24VDC switching powersupply that can accept a 150% overcurrent during 3 to 5 seconds.P1
P3
P1P3
P2 P4
P5
31PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
Pin 2 - Direction of rotation
Pin P2 - White wire - Direction of rotation
2P2 CCW
2 CW
• It’s possible to sent direction of rotation signal «DIR».• Delay time for switching direction of rotation is 0,5s during the motorized roller rotation.
RUN
DIRsignal
Direction of rotation
0.5sON
CW
CCW
Pin 4 - Start / Stop
Stop
Start
P44
4
32PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
PM500ME SERIE
Pin 5 - Speed variation
Speed variation by injection of analogic external voltage 0-10VDC
Pin P5 - Grey wire - Speed variation 0~10VDC 5
Imperatively connect the 0V power of the motorized roller with 0V of 0-10V supply for speedvariation.
Nominal speed
Real speed
80 9,3-10 80.8
70 8,5±0,2 72.4
60 7,5±0,2 61.2
50 6,5±0,2 51.0
40 5,5±0,2 40.8
30 4,5±0,2 30.8
20 3,5±0,2 20.3
15 2,5±0,2 15.2
10 1,5±0,2 10.2
7.5 0-0,9 7.7
Motor side
Speed adaptator PM500ME
Ref. Speed code80m/min
NA 80,86,2 72,44,3 61,23,3 51,02,2 48,81,8 30,81,2 20,3
0,75 15,20,43 10,2
NA 7,7
Speed variation with speed adaptator (with a resistor)
33PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
11 - PROTECTIONS
Against under-supply
RUN signal
Powervoltage
1s
18V
ON
24V
15V
1s
RUN-trial RunStop
Against induced voltage
RUN signal
Powervoltage
1s
40V
ON
24V30V
2s
RUN-trial RunStop
34PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
PM500ME SERIE
Thermal protection
° C and the power of the motorized roller is reduced to 6.25% of its power at the time of stop and switches on
power at the time of stop.
RUN signal
Powervoltage
1s
95°C
ON
Thermal
2s
RUN-trial RunStop
0,5s
6,25%0%
100%
35PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
Against blocking
. Then its power will be
12.5%, then 6.25% .
At the end of the cycle, the motorized roller restarts at 50% of its power . and repeats the
same cycle until the motor roller turns 6 turns of rotation.
operation.
RUN signal
1s
ON
2s
RUN-trial RunStop
0,5s
6,25%0%
100%
Motor RunStop
0,5s1s0,5s
50%
25%
12,5%
0,5s
RUN signal
ON
RUN-trial RunStop
0%
100%
Motor RunStop
36PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
PM500ME SERIE
12 - ACCESSORIES
Ribbed belt
Pitch between the rollers (mm)
For pulley Ø43mm
Number of rib2 3
Load to be conveyed Load to be conveyed
53-56 Ref. 2PJ246-43 Ref. 3PJ246-4360-63 Ref. 2PJ256-43 Ref. 3PJ256-4364-65 Ref. 2PJ265-43 Ref. 3PJ265-4366-67 Ref. 2PJ270-43 Ref. 3PJ270-4371-72 Ref. 2PJ282-43 Ref. 3PJ282-4373-75 Ref. 2PJ286-43 Ref. 3PJ286-4376-78 Ref. 2PJ290-43 Ref. 3PJ290-4380-84 Ref. 2PJ302-43 Ref. 3PJ302-4387-91 Ref. 2PJ314-43 Ref. 3PJ314-4392-95 Ref. 2PJ316-43 Ref. 3PJ316-43
97-101 Ref. 2PJ336-43 Ref. 3PJ336-43103-107 Ref. 2PJ346-43 Ref. 3PJ346-43115-118 Ref. 2PJ372-43 Ref. 3PJ372-43119-121 Ref. 2PJ376-43 Ref. 3PJ376-43123-128 Ref. 2PJ388-43 Ref. 3PJ388-43129-134 Ref. 2PJ416-43 Ref. 3PJ416-43142-147 Ref. 2PJ436-43 Ref. 3PJ436-43150-156 Ref. 2PJ442-43 Ref. 3PJ442-43157-161 Ref. 2PJ456-43 Ref. 3PJ456-43170-176 Ref. 2PJ486-43 Ref. 3PJ486-43196-202 Ref. 2PJ536-43 Ref. 3PJ536-43208-215 Ref. 2PJ570-43 Ref. 3PJ570-43254-258 Ref. 2PJ636-43 Ref. 3PJ636-43305-310 Ref. 2PJ746-43 Ref. 3PJ746-43
- use a 3 rib belt to ensure stability on the pulley
- Projection, oil mist - Projection, mist, water vapor at all times - Abrasive dust such as sand, etc.
Pitch Pitch
37PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
24VDC power supply
Reference Input Output Power Start-up boostCT-10-241
380~480V3 ph
24V-10A 240W 120%QT-20-241 24V-20A 480W 150%QT-40-241 24V-40A 960W 150%
Round belt
Pitch between the rollers Belt reference75mm
100mm
Pitch Pitch
Length Extension cable reference2m 405000P02M0205m 405000P02M050
Extension cables
2 / 5 m
Speed adaptator
Ref Ra (K )6,24,33,32,21,81,2
0,750,43
38PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
PM500ME SERIE
13 - PRODUCT IDENTIFICATION
ITO
H D
EN
KI P
M
500ME0600800XG0SC001 10/14 1151 IP54 24VDC 55m/mn S1
1
2
3
4
56
7
1
2
3
4
5
6
7
Product reference number
Month and year of manufacture
Serial number
Power supply
Speed
Operation
Round label
Square label
PMPMPPMPMPMPMPMPMPMPMPMMPMPPMPMPMPMPPMPPMPMPPMPMPMPPPPPMPPMPMPMMMMMMMMMMMMMMMMMMM50555505555555555555555555055555505500M
1
2
3
4
5
6
7
Product reference number
Month and year of manufacture
Serial number
Power supply
Nominal intensity
Absorbed power
8 Speed
7 Operation
PM500ME 060 0800 X G0SC001
SerieSpeed code
Tube length
1
39PM500ME SERIE TECHNICAL DOCUMENTATIONUpdated 30/05/2017
INCORPORATION DECLARATIONin accordance with the EC Machinery Directive 2006/42/EC, Annex II B
The manufacturer:
1146-2 Asazuma-Cho, Kasai, Hyogo 679-0180 Japan
Distributed in Europe by :
ITOH DENKI Europe SAS
hereby declares that the product series :
PM500ME MOTORIZED ROLLER
requirements of this Directive. Commissioning is prohibited until the whole machine/system in which it is incorporated is declared to be in compliance with the EC Machinery Directive
1146-2 Asazuma-Cho, Kasai, Hyogo 679-0180 Japan
EC Directives applied :• Machinery Directive 2006/42/EC• European EMC Directive 2014/30/EC• European RoHS Directive 2011/65/EU
T. AKASHI, Managing Director
ANNEX 1
PM500ME SERIEPM500ME SERIE
ITOH DENKI EUROPE S.A.S.
490 Av. des JourdiesZ.A.E. les Jourdies
E-mail : [email protected]
WWW.ITOH-DENKI.COM
ITOH DENKI UK BRANCH OFFICE
Suite 1 Trinity Space CentreWaldorf Way
E-mail : [email protected]
ITOH DENKI GERMANYBRANCH OFFICE
Neumeyerstrabe 48
E-mail : [email protected]