Ideal for the installation under a slicingmachine, elevator or belt-conveyor allwhilst easy reelaccess is maintained.

This Jumbo boasts a patented film adjustment system that guides the filmas close as possible to the thermoforming machine without inertia.Handling the reels is made easy with a purpose-designed handling cart.Productivity gains are apparent and safety unquestionable as the pro-cess continues uninterruptedly.

Install an Additif Système and be sure to optimise you will optimalyour production line.

MADE INFRANCE

ANGLE TRANSMISSIONJUMBO

PRATICALSAFE INDEPENDENT

UN+ACTIF

Unwinder.With a small reel support (connected rapidly).

Two quick-change mandrels.A reel holder (Ref. 730-1107).

>The two mandrels enable the reel to be prepared in concurrentoperation time. When the reel is almost empty, the operator isinformed and he can then transfer the small reel (Reel weightwith the mandrel, approximately 15kg), prepare the new reel andto install it in masked time.

> The unwinder enables the reel to be unloaded from the rear or the side thanks to the arm opening and its hydraulic lifting system. It positions, drives and declerates the reel.

> Option: possibility of selecting the unitʼs location and the direc-tion in which the arm opens.

IT COMPRISES

-Simple and quick installation on all types of newor operating machines.

- Lateral loading (right or left)

- Load the reel in concurrent operation time.

- Turnkey delivery with a reel transport cart and 2 quick tightening mandrels, 3ʼʼ or 6ʼʼ.

Productivity:prevents interruptions in the manu-facturing process (decrease the number of filmchanges) and reduces the film scrap (lower andupper).

Health:reduces operator movement and eliminatesthe need of a wood pallet in production area.Safety: removes risks related to the handling of large reels and sets operatorsʼ minds at ease.

ADVANTAGES

ENCOMBREMENT

PAO

H !

Stu

dio

Gra

phiq

ue

- D

ole

- 03

84

82 5

021

10

2/20

17

Place the reel-holderagainst the pallet, lock thewheels.

Roll the reel on thereel-holder.

Option: Rotary cart with 4 possible loading positions (Ref. 730-1172).

JUMBOANGLE TRANSMISSION

4, rue de Monnières - 39100 Foucherans - FranceTél. 00 33 (0)3 84 79 27 23 - Fax. 00 33 (0) 3 84 82 03 85 - www.additifsysteme.com - commercial@additifsysteme.com

Ideal for the installation under a slicingmachine, elevator or belt-conveyor allwhilst easy reel access is maintained.

Double-sidedscotch tape

Quick connection systemPréparation :

- Make a loop on the new reel.- Set up double-sided scotch tape.

Connection :When the small reel is almost at an end :- Remove the protection from the double-sided scotch tape.- Unroll 1 to 2 metres of film.- Attach the end of the film to the scotch tape.- Roll the reel.

UN+ACTIF

> The reel-holder enables the reel to be transferred (without anyspecific handling) and the reel to be transported to the machine.Its edges are specially studied to make reel handling easier.