NETWORKING IN LINUXDNS Related Commands

Sayed AhmedComputer Engineering, BUET, Bangladesh (Graduated on 2001 )MSc, Computer Science, U of Manitoba, Canada

http://www.justetc.nethttp://sayed.justetc.net

http://linkedin.com/in/sayedjustetc

sayed@justetc.net

INTRODUCTION

Will list mostly DNS related commands and concepts

At one point, will try to discuss DNS system

At another point, will try to explain how to configure DNS system Related

Zones (Forward Zones, Reverse Zones) And related

BUT SOME RESOURCES

How to configure DNS in Linux http://

www.tldp.org/LDP/lame/LAME/linux-admin-made-easy/domain-name-server.html

http://computernetworkingnotes.com/network-administrations/dns-server.html

How does the DNS system work http://

en.wikipedia.org/wiki/Domain_Name_System http://

wiki.bravenet.com/How_the_domain_name_system_works

DNS COMMAND ANSWER TYPES

Authoritative Answer vs Non-Authoritative Answer

For a DNS related Linux command Any answer that originates from the DNS Server which

has the complete zone file information available for the domain is said to be authoritative answer.

In many cases, DNS servers will not have the complete zone file information available for a given domain. Instead, it maintains a cache file which has the results of all queries performed in the past for which it has gotten authoritative response. When a DNS query is given, it searches the cache file, and return the information available as “Non-Authoritative Answer”.

GET DOMAIN/HOST IP ADDRESS

Get domain/host IP address nslookup yahoo.com host -t A yahoo.com

NSLOOKUP

1. nslookup – Simple Example nslookup followed by the domain name will

display the “A Record” ( IP Address ) of the domain

$ nslookup redhat.com Server: 192.168.19.2 Address: 192.168.19.2#53

Non-authoritative answer: Name: redhat.com Address: 209.132.183.181

NSLOOKUP AND QUERY THE MX RECORD 2. Query the MX Record using -query=mx MX ( Mail Exchange ) record maps a domain name to a list of mail

exchange servers for that domain. The MX record tells that all the mails sent to “@redhat.com” should be routed to the Mail server in that domain.

$ nslookup -query=mx redhat.com Server: 192.168.19.2 Address: 192.168.19.2#53

Non-authoritative answer: redhat.com mail exchanger = 10 mx2.redhat.com. redhat.com mail exchanger = 5 mx1.redhat.com.

Authoritative answers can be found from: mx2.redhat.com internet address = 66.187.233.33 mx1.redhat.com internet address = 209.132.183.28

QUERY THE NS RECORD USING -QUERY=NS

3. Query the NS Record using -query=ns NS ( Name Server ) record maps a domain name to a list of DNS servers authoritative

for that domain. It will output the name serves which are associated with the given domain

nslookup -type=ns redhat.com Server: 192.168.19.2 Address: 192.168.19.2#53

Non-authoritative answer: redhat.com nameserver = ns4.redhat.com. redhat.com nameserver = ns2.redhat.com. redhat.com nameserver = ns1.redhat.com. redhat.com nameserver = ns3.redhat.com.

Authoritative answers can be found from: ns4.redhat.com internet address = 209.132.188.218 ns2.redhat.com internet address = 209.132.183.2 ns1.redhat.com internet address = 209.132.186.218 ns3.redhat.com internet address = 209.132.176.100

QUERY THE SOA RECORD USING -QUERY=SOA

4. Query the SOA Record using -query=soa SOA record ( start of authority ), provides the authoritative information

about the domain, the e-mail address of the domain admin, the domain serial number, etc…

$ nslookup -type=soa redhat.com Server: 192.168.19.2 Address: 192.168.19.2#53

Non-authoritative answer: redhat.com origin = ns1.redhat.com mail addr = noc.redhat.com serial = 2012071601 refresh = 300 retry = 180 expire = 604800 minimum = 14400

ALL THE AVAILABLE DNS RECORDS USING -QUERY=ANY

Authoritative answers can be found from: ns1.redhat.com internet address = 209.132.186.218

5. View available DNS records using -query=any We can also view all the available DNS records using -query=any option.

$ nslookup -type=any google.com Server: 192.168.19.2 Address: 192.168.19.2#53

Non-authoritative answer: Name: google.com Address: 173.194.35.7 Name: google.com Address: 173.194.35.8

google.com nameserver = ns1.google.com. google.com nameserver = ns2.google.com.

ALL THE AVAILABLE DNS RECORDS USING -QUERY=ANY

google.com origin = ns1.google.com mail addr = dns-admin.google.com serial = 2012071701 refresh = 7200 retry = 1800 expire = 1209600 minimum = 300 google.com mail exchanger = 20 alt1.aspmx.l.google.com. google.com mail exchanger = 30 alt2.aspmx.l.google.com. google.com mail exchanger = 40 alt3.aspmx.l.google.com. google.com mail exchanger = 50 alt4.aspmx.l.google.com. google.com mail exchanger = 10 aspmx-v4v6.l.google.com. google.com has AAAA address 2a00:1450:4002:801::1004

Authoritative answers can be found from: ns4.google.com internet address = 216.239.38.10 ns3.google.com internet address = 216.239.36.10

REVERSE DNS LOOKUP

6. Reverse DNS lookup You can also do the reverse DNS look-up by

providing the IP Address as argument to nslookup.

$ nslookup 209.132.183.181 Server: 192.168.19.2 Address: 192.168.19.2#53

Non-authoritative answer: 181.183.132.209.in-addr.arpaname = origin-

www2.redhat.com.

USING SPECIFIC DNS SERVER

7. Using Specific DNS server Instead of using default DNS server’s for querying, you can also

specify a particular name server to resolve the domain name. $ nslookup redhat.com ns1.redhat.com

Server: 209.132.186.218 Address: 209.132.186.218#53

Name: redhat.com Address: 209.132.183.181

In the above command, we have used the ns1.redhat.com as the DNS server. Here you may notice that, we don’t get any “Non-authoritative answer:” header, since ns1.redhat.com has all the zone information of redhat.com

PORT FOR DNS

8. Change the port number to connect with By default DNS servers uses the port

number 53. If for any reasons, the port number got changed, then we can specify the port number using -port option

$ nslookup -port 56 redhat.com

DNS TIMEOUT

9. Change timeout interval to wait for a reply You can change the default timeout to wait

for a reply using -timeout option $ nslookup -timeout=10 redhat.com

ENABLING DEBUG MODE USING -DEBUG 10. Enabling debug mode using -debug

You can turn on/off the debugging using -debug option in the command line

$ nslookup -debug redhat.com Server: 192.168.19.2 Address: 192.168.19.2#53

FIND IP MAPPING

Code: host 66.94.234.13 nslookup 66.94.234.13

DIG

You can also use dig Code:

dig yahoo.com dig 66.94.234.13

NAMESERVER FOR YOUR HOST

Your name server listed in /etc/resolv.conf file

Code: more /etc/resolv.conf cat /etc/resolv.conf vi /etc/resolv.conf

HOST

host This is the simplest of the DNS commands. It is a

quick way to determine the IP address of a hostname:

host www.linuxjournal.com www.linuxjournal.com has address 207.178.22.49 www.linuxjournal.com mail is handled (pri=80) by www.ssc.com www.linuxjournal.com mail is handled (pri=10) by mail.ssc.com www.linuxjournal.com mail is handled (pri=40) by cascadia.a42.com

REVERSE LOOKUP

Now that you know the IP address for www.linuxjournal.com, you might want to make sure the reverse lookup works. The reverse lookup checks to see if the

reverse zone file maps the IP address to the hostname:

host 207.178.22.49 49.22.178.207.IN-ADDR.ARPA

domain name pointer www.linuxjournal.com

LISTING 1. DNS INFO IN VERBOSE FORMAT WITH -A OPTION

Listing 1. DNS Info in Verbose Format with -a Option host -a www.linuxjournal.com Trying null domain rcode = 0 (Success), ancount=4 The following answer is not authoritative: The following answer is not verified as authe by the server: www.linuxjournal.com 19788 IN MX 80 www.ssc.com www.linuxjournal.com 19788 IN MX 10 mail.ssc.com www.linuxjournal.com 85833 IN A 207.178.22.49 www.linuxjournal.com 19788 IN MX 40

cascadia.a42.com

LISTING 1. DNS INFO IN VERBOSE FORMAT WITH -A OPTION

For authoritative answers, see: linuxjournal.com 85833 IN NS NS2.ssc.com linuxjournal.com 85833 IN NS cascadia.a42.com linuxjournal.com 85833 IN NS

NS2.RACKSPACE.com Additional information: www.ssc.com 226 IN A 207.178.22.48 mail.ssc.com 86261 IN A 216.39.159.17 cascadia.a42.com 72030 IN A 216.39.159.18 NS2.ssc.com 88090 IN A 209.61.155.155 NS2.RACKSPACE.com 172308 IN A 207.71.44.121

DIG

dig (domain information groper) This powerful command gathers and returns DNS

information in a format the name server can use directly. For this reason, dig is particularly useful in scripts. You will find it easy to query specific name servers with dig, making it a useful tool for narrowing down the source of DNS problems.

Suppose you have just transferred your domain name hosting from old-host.com to new-host.com. A customer sends you an e-mail saying he cannot reach your web site when he is logged into his ISP. You suspect the zone information simply has not had time to propagate. So, you find out what the NS records are for the ISP in question:

DIG

dig ns isp-in-question.com ;; ANSWER SECTION:

isp-in-question.com. 10H IN NS ns1.hugeupstream.com.

isp-in-question.com. 10H IN NS isp-in-question.com.

isp-in-question.com. 10H IN NS ns.isp-in-question.com.

isp-in-question.com. 10H IN NS ns.goodnameserver.com.

DIG

Then you check your company's web site against the ISP's name servers: dig www.yourcompany.com @ns.isp-in-

question.com ;; ANSWER SECTION:

www.yourcompany.com. 59m53s IN A 192.168.5.10

.NSLOOKUPRC

Just as you can issue commands to nslookup interactively, you can also change the initial defaults by starting a .nslookuprc file. The format of the .nslookup is one command per line: set type=NS set domain=srvns.new-host.com set timeout=10

NSLOOKUP

Listing 2. Output with nslookup nslookup

Default Server: server.randomisp.com Address: 172.16.53.130

> set all Default Server: server.randomisp.com Address: 172.16.53.130 Set options: nodebug defname search recurse nod2 novc noignoretc port=53 querytype=A class=IN timeout=10 retry=2 root=a.root-servers.net. domain=randomisp.com srchlist=randomisp.com

NSLOOKUP

> set type=mx > server srvns.new-host.com Default Server: srvns.new-host.com Address: 192.168.200.145 > yourcompany.com Server: webns.new-host.com Address: 192.168.200.144 yourcompany.com preference = 10, mail exchanger =< mail.new-host.com yourcompany.com nameserver = srvns.new-host.com yourcompany.com nameserver = webns.new-host.com mail.new-host.com internet address = 192.168.200.72 srvns.new-host.com internet address = 192.168.200.145 webns.new-host.com internet address = 192.168.200.144 > exit

REFERENCES

http://www.linuxjournal.com/article/4597?page=0,0

http://www.thegeekstuff.com/2012/07/nslookup-examples/