dnr-322l & dnr-326. agenda: how to access dnr-322l using mydlink account how to access the web...

DNR-322L & DNR-326

Agenda:• How to Access DNR-322L using mydlink account

• How to Access the Web Interface of DNR-322L_DNR-326 via NVR Search Utility

• How to Add a D-Link IP Camera via DNR-322L_DNR-326 Web GUI

• How to Configure Schedule Recording on DNR-322L_DNR-326

• How to Duplicate Camera To Get Multiple Channel Viewing on DNR-322L_DNR-326

• How to Format DNR-322L_DNR-326 as RAID 1 for NVR Recording

• How to Perform Firmware Upgrade on DNR-322L_DNR-326

• How to Playback the Recordings on DNR-322L via mydlink portal

• How to Playback the Recordings via DNR-322L_DNR-326 Web GUI

• How to Set Static IP Address on DNR-322L_DNR-326 via NVR Search Utility

How to Access DNR-322L using mydlink Account

Open your web browser, type http://sg.mydlink.com on the address bar and press enter

Enter the E-Mail Address and Password used to register on mydlink and then click on the Sign In button

Select DNR-322L from the models listed on the left. The image of the camera will now show up on the page. If you have installed more than 1 camera to DNR-322L, please choose which camera you wish to view by selecting the camera name at the bottom right corner

To access to the WEB GUI of DNR-322L, please click on NVR Info Tab. Select Advanced Setting

Windows will pop-up a new page to login DNR-322L Web GUI for advanced configuration setup. Please login with the username and password that you have configured for your DNR-322L. Note:•The default user name is admin, password is blank.•Live Video Viewing will not be available on DNR-322L WEB GUI if you accessed it via www.mydlink.com > advanced setting button

How to Access the Web Interface of DNR-322L_DNR-326 via NVR Search Utility

Note: Please access DNR-322L / DNR-326 WEB Interface via Internet Explorer 7 and above

Double click on Computer icon.

On the Computer screen dialog box, double click on DVD/CD Rom Drive for the DNR-322L / DNR-326

Open the NVR Search folder inside the DVD/CD Rom of DNR-322L / DNR-326

Double click D-Link NVR Search Utility executable file

On the D-Link NVR Search Utility, highlight the detected DNR-322L / DNR-326 and then click on the Configuration button

A login screen will appear, enter the User Name as “admin”, leave the Password field blank (the password is blank in factory default setting, please enter your own password if you have changed it) and then click on the Login button

You will now be re-directed to the DNR-322L / DNR-326 web interface

How to Add a D-Link IP Camera via DNR-322L_DNR-326 Web GUI

Note: Please access DNR-322L / DNR-326 WEB Interface via Internet Explorer 7 and above

Double click on Computer icon.

On the Computer screen dialog box, double click on DVD/CD Rom Drive for the DNR-322L / DNR-326

Click on the SETUP tab and then click on Camera Search button on the left hand side.Click on the SEARCH button at the bottom. DNR-322L / DNR-326 will search for all D-Link ip cameras located within the same network

All detected D-Link ip cameras will be listed. Click on the ‘+’ sign at the back of the camera to add it into DNR-322L / DNR-326

A ‘CAMERA SETTINGS’ window will prompt out. Enter the camera name and the username & password of the D-Link ip camera. Click ‘Add’ button

Alternatively, you may add the D-Link IP Cameras manually via Camera Setup button as following. Click on the SETUP tab and then click on Camera Setup button on the left hand side

On the CAMERA SETUP section, select Index 1 at the table below. Enter the Camera Name, Address, Administrator Name & Password of your D-Link IP Camera. Click on ‘Auto Detection’ button. The model will be shown automatically once the ip camera is detected successfully

Click on the Save Settings button

Click on the OK button on the message dialog box appears

To make changes on the ip camera configuration, highlight the camera that you would like to setup from the CAMERA LIST section. Click on the Save Settings button after finish modification

To view the live video of the ip camera that you have added, click on the LIVE VIDEO menu

Double click on your added camera on the camera list section

It will now show you the image of the camera

How to Configure Schedule Recording on DNR-322L_DNR-326



Click on the SETUP tab, select on Recording Schedule button on the left hand side. Under the RECORDING MODE section, select the radio button on Record by Schedule

Under the RECORDING SCHEDULE section, select the camera you would like to set the schedule for recording and then click on the Insert button

On the Schedule Configuration section, configure the following.

Enter the Start Time the camera will start the recordingEnter the End Time the camera will end the recordingPut a check mark on Enable Audio recording if you want the recording to have an audioClick on the OK button

The added schedule is now successfully added under the Schedule section

How to Duplicate Camera To Get Multiple Channel Viewing on DNR-322L_DNR-326



Click on the Live Video tab. On the right, right click the name of the camera that you wish to duplicate. Note: The camera must support ePTZ function in order to allow multiple channel viewing at different point

Scroll down, the duplicated camera will be in light green color. Double click the camera name

On the duplicated channel, right click and select Enable Digital PTZ

On the duplicated channel, you may zoom in at specific location that you wish to see more details. This is very useful when used with high resolution camera

How to Format DNR-322L_DNR-326 as RAID 1 for NVR Recording


A login screen will appear, enter the User Name as “admin”, leave the Password field blank and then click on the Login button

Click on the MAINTENANCE menu and then click on the RAID button on the left hand side

Under the RAID CONFIGURATION section, click on the button, Set RAID Type and Re-Format

Click on the Next button to proceed

Select the radio button on NVR Only and then select on RAID 1 (Mirroring – Keeps Data Safe). Click on the Next button. Note: If you choose to use second harddisk as file server, no RAID can be formed. The harddisk status will only be “Standard”, with 2 harddisk separated as Volume 1 for NVR, Volume 2 for file server

Click “Format” to start disk formatting. After the format finish, it will be in RAID 1

How to Perform Firmware Upgrade on DNR-322L_DNR-326



Click on the MAINTENANCE menu and then click on the Firmware Upgrade button on the left hand side

Under the CURRENT FIRMWARE INFORMATION section, click on Browse button

On the Choose File to Upload dialog box, locate and select the firmware to upload and then click on the Open button

Back to the CURRENT FIRMWARE INFORMATION section, click the Apply button

Please wait while the firmware is updating

Click on the OK button

Please wait while the DNR-322L / DNR-326 is restarting

How to Playback the Recordings on DNR-322L via mydlink portal

Open your web browser, type http://sg.mydlink.com on the address bar and press enter

Enter the E-Mail Address and Password used to register on mydlink and then click on the Sign In button

Select DNR-322L from the models listed on the left. Click on Playback tab on top. Click on the Date/Time Search button at the bottom left corner

A window will prompt out. On the Date Time Search Dialog box, configure the following, •Select the Date you want to playback the recording•Put a check mark on Show Records•Select the Camera you want to playback the recording•Select the Time you want to play back the recording by highlighting the time of recording•Click on the OK button

It will return to the PLAYBACK menu to play the recordings. Press the start icon at the bottom to start playback. You may click fast forward icon to forward the video clips

How to Playback the Recordings via DNR-322L_DNR-326 Web GUI



Click on the PLAYBACK menu and then click on the Open Record button on the right hand side

On the Date Time Search Dialog box, configure the following, •Select the Date you want to playback the recording•Put a check mark on Show Records•Select the Camera you want to playback the recording•Select the Time you want to play back the recording by highlighting the time of recording•Click on the OK button

It will return to the PLAYBACK menu to play the recordings. Press the start icon at the bottom to start playback. You may click fast forward icon to forward the video clips

How to Set Static IP Address on DNR-322L_DNR-326 via NVR Search Utility

Double click on Computer icon

On the Computer screen dialog box, double click DVD/CD Rom Drive of DNR-322L/ DNR-326

On the D-Link NVR Search Utility, do the following step, •Click Refresh button to search for DNR-322L / DNR-326 in the network•Highlight on the detected DNR-322L / DNR-326•Select Disable on the drop down menu under “Receive DHCP”•Enter the IP Address, Subnet Mask, Default Gateway that you would like to set on the DNR-322L / DNR-326, take note that the IP address you set must be on the same subnet as your network.•Click the Apply button for the settings to take effect.•Now you should access DNR-322L / DNR-326 with the new ip address that you have configured

Setup Wizard - Setting Up DNR-322L WITH mydlink Account

Run the Installation CD that comes with the DNR-332L. On the Set-Up Wizard screen click on the Start button

Follow the screen instruction for the installation of DNR-322L. Click on NEXT button

The default password: “leave it blank”. Click on Next button when done

Please enter a new password to secure you DNR-322L. Click on Next button when done

Click YES to format your Hard Drive

Connect D-Link ip cameras to router. Click NEXT to detect and add camera that is in the same network to DNR-322L

If you have registered a mydlink account before, you may enter your existing mydlink account Username and Password. This allows you to use a single user account to manage all mydlink devices. If you are a new user or you wish to use different mydlink account for DNR-322L, please select “No, I need to sign up for a new account”. A verification email will be sent to your email address to activate the account

Setup is Completed. Click on the Finish button

You are now ready to access the DNR-322L using mydlink account. Open your web browser and type http://sg.mydlink.com on the address bar and then press “enter”.

Enter the E-Mail Address and the Password you used to register on mydlink and then click on the Sign In button

Select DNR-322L from the models listed on the left. The image of the camera will now show up on the page. If you have installed more than 1 camera to DNR-322L, please choose which camera you wish to view by selecting the camera name at the bottom right corner

dnr-322l & dnr-326. agenda: how to access dnr-322l using mydlink account how to access the web...

Documents