dmvc 2 server setup · opera of opera software as headquartered in oslo, norway. third-party...

REV. 1.0.0 | 2019-07-03

CONFIGURATION

DMVC

System SetupFIRMWARE VERSIONS 2.0.14.0

Copyright © 2019 Dallmeier electronic GmbH & Co.KG

The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages.

All rights reserved in the event of the grant of a patent, utility model or design.

The manufacturer accepts no liability for damage to property or pecuniary damages arising due to minor defects of the product or documentation, e.g. print or spelling errors, and for those not caused by intention or gross negligence of the manufacturer.

Figures (e.g. screenshots) in this document may differ from the actual product.Specifications subject to change without notice. Errors and misprints excepted.

All trademarks identified by ® are registered trademarks of Dallmeier.

All trademarks identified by *) are trademarks or registered trademarks of the following owners:Apple, Mac, OS X and Safari of Apple Inc. headquartered in Cupertino, California, USA;Google and Google Chrome of Google Inc. headquartered in Mountain View, California, USA;JavaScript of Oracle Corporation (and/or its affiliates) headquartered in Redwood Shores, California, USA;Linux of Linus Torvalds (in the USA and other countries);Microsoft, ActiveX, Internet Explorer, Microsoft Edge and Windows of Microsoft Corporation headquartered in Redmond, Washington, USA;Mozilla and Firefox of Mozilla Foundation headquartered in Mountain View, California, USA;Opera of Opera Software AS headquartered in Oslo, Norway.

Third-party trademarks are named for information purposes only.Dallmeier respects the intellectual property of third parties and always attempts to ensure the complete identification of third-party trademarks and indication of the respective holder of rights. In case that protected rights are not indicated separately, this circumstance is no reason to assume that the respective trademark is unprotected.

This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org) and cryptographic software written by Eric Young ([email protected]).

3DMVC System Setup | REV. 1.0.0 | © 2019 Dallmeier

Contents

Chapter 1: INtrODUCtION 51.1 Validity 51.2 Compatibility 51.3 Disclaimer 51.4 Documents 61.4.1 This Document 61.4.2 Other Applicable Documents 61.5 Typographical Conventions 7

Chapter 2: DMVC SerVer 82.1 Installation 82.2 START 10

Chapter 3: DMVC app 113.1 Validity 113.1.1 Appropriate Use 113.1.2 Requirements 113.2 Start und Navigation 123.3 Info Dialog 133.4 Configuration 133.4.1 Add Recorder 133.4.2 Access via DMVC Server 153.4.3 Quality 153.4.4 Recorder Editing/Deleting 163.4.5 System Status 163.5 Cameras 183.5.1 Camera Name 193.5.2 Camera Resolution 193.6 Live Display 20

Chapter 4: pSerVICe 224.1 Requirements 224.2 Installation 224.3 Konfiguration 274.3.1 Start 274.3.2 Broadcast Scanner 284.3.3 Create System/Project 284.3.3.1 Configure 284.3.4 Setting up DMVC Server 344.3.4.1 Virtual server configuration 354.3.4.2 Configuring Client Access 364.3.4.3 Configuration of user access 374.3.4.4 DMVC access configuration for client and user 38

4 DMVC System Setup | REV. 1.0.0 | © 2019 Dallmeier

IntroductionDMVC 2 is a server software for the connection of Dallmeier recording systems to the Internet. With DMVC 2, the entire local video network can be accessed via a common external IP address. All live images and recordings can be accessed via the mobile network or WiFi using the DMVC 2 App smartphone ap-plication. Special transcoding optimizes the video data for display on the mobile device while simultane-ously ensuring a high frame rate.

The Dallmeier Mobile Video Center app is available free of charge in the iTunes App Store oder on Google Play.

This document contains an overview of the requirements and the necessary steps for installing and com-missioning the system. The system consists of three software components: the DMVC2 Server System, the DMVC Mobile App to access the server, and PService to configure the system. The essential steps to enable the mobile access to a recorder with this system can be found in this document. If further or more detailed information about certain functions of the individual programs is required, this can be found in the corresponding document “Configuration” or “Operation”.

1.1 VaLIDItYThe contents of this document are based on the software version 2.0.14.0.

Figures (screenshots) in this document may differ from the actual product.

1.2 COMpatIBILItYThe software version 2.0.14.0 is compatible with the following hardware/software:

• PService as of version 3.5.15.0• Android 5.0 or higher• • Apple iOS 9 or higher• Dallmeier SMAVIA Appliances as of version 9.x.x• Dallmeier SMAVIA Appliances as of version 8.x.6• Dallmeier Recording Systems as of version 7.x.x

required license (direct access)• DLC-PRemote HD


1.3 DISCLaIMerNote that

• certain functions and features are only available if supported by the used hardware.• the functional range of your device depends on the ordered equipment or device variant and may

differ from the contents of this document.• certain functions and features may require purchasing a license.

1.4 DOCUMeNtSThe product documentation contains several documents that are supplied with your device in a printed form and/or on a digital medium.Further technical documentation for your device, if available, is published exclusively on the website www.dallmeier.com.

Read the available product documentation carefully and thoroughly before using your device.Always observe and follow the contained instructions, notes and warnings as well as the technical data in the currently valid product specification of your device.

Keep all documents in legible condition and in a suitable location for future reference.

Regularly check the website www.dallmeier.com for the latest product documentation updates.

1.4.1 this Document

The “DMVC System Setup” document (this document) contains detailed descriptions of the setup proce-dure. mobile access to a recording system via DMVC Server 2.The target group of this document are trained system integrators.

1.4.2 Other applicable Documents

product SpecificationThe product specification contains detailed technical data, features and characteristics of the respective device.The target audience of the document is trained system integrators (video security/surveillance systems installation contractors).

https://www.dallmeier.com/



1.5 tYpOGraphICaL CONVeNtIONSFor reasons of clarity and readability, various text formatting elements and types of emphasis are used in this document:

NOTICE

NOTICE indicates measures to prevent device and/or property damage due to improper configuration of the device or faulty operations.

Instructions are indicated by arrows (▶). ▶ Always carry out instructions one after the other in the sequence described.

expressions highlighted in bold and dark gray usually refer to the name of an application, product or function or indicate a user interface control element (button, check box, drop-down list, menu item, etc.).

Paragraphs in italics provide information on basic principles, special features and efficient procedures as well as general recommendations.


DMVC ServerThe installation of DMVC Server always requires administrator rights and enabled user account control (Windows 7).

2.1 INStaLLatION ▶ Close all applications. ▶ Start the file Setup_DMVC_x.x.x.exe.

The Select Setup Language dialogue is displayed.

Fig. 2-1

▶ Select the language for the installation dialogues. ▶ Confirm with OK.

The DMVC Server installation welcome dialogue is displayed.

Fig. 2-2

▶ Confirm the welcome dialogue with Next. ▶ Confirm the subsequent license dialogue with Next.

The DMVC Server installation directory dialogue is displayed.


Fig. 2-3

▶ Select the appropriate installation directory. ▶ Confirm with Next.

The DMVC Server installation start dialogue is displayed.

Fig. 2-4

▶ Confirm the with Install.

The installation process is started.


Fig. 2-5

▶ Confirm the final notification dialogue with Finish.

2.2 StartProceed as follows to start the application after installation:

▶ Make sure that the server is connected to the license dongle. ▶ Use the Explorer to change to the directory where the application was installed (see above).

▶ Click the icon to start the program.

The program is started and can now be configured with PService.

Since the program runs as a service, it has no GUI/output that displayscan become.


DMVC App

3.1 VaLIDItYThe configuration and operation of the Android version are essentially the same as for the iOS version.

3.1.1 appropriate Use

The application DMVC App enables the mobile access to Dallmeier systems (DVR, NVR, server, cameras) with an iOS system. You can conveniently access live images as well as the corresponding recordings on the go. Special transcoding prepares the images for an ideal display on the iOS system and ensures a high frame rate at the same time.

3.2 Start aND NaVIGatIONAfter the start of the application, the Locations dialog will be displayed in its default state.

Fig. 3-1

Default state (here with previously configured recorders)

▶ Tip the Menu button (on the upper left) to open the navigation menu.


Fig. 3-2 Navigation menu

▶ Select a relevant option.

• Locations This option provides access to the display of defined appliances.

• Favorites Favorites are bookmarks for quick selection of defined cameras.

• Video With this option recordings of camera tracks recorded with the application can be viewed and man-aged.

• Snapshots This option contains snapshots (single images) of camera tracks made with the application.

• recorders Here appliances are defined and configured.

3.3 INFO DIaLOGThe info dialog shows the App Id and enables access to information about 3rd party software licenses. Apart from that, a link offers quick access to the Dallmeier website.

▶ Tip the Info button (upper right) to open the info dialog.

Fig. 3-3 Info dialog


3.4 CONFIGUratIONTo be able to use the functions of the DMVC App the recorder and/or the cameras have to be configured for mobile access.

▶ Ensure that the most recent version of the DMVC App is used. ▶ Load the most recent version of the DMVC App from the App Store, if necessary

3.4.1 add recorder

A Dallmeier recorder is defined by the specification of the corresponding access data within the applica-tion. The relevant access data differs depending on the access type, directly or via a DMVC Server.

NOTICE

The user rights of the used account are adopted from the recorder. Make sure to configure the corresponding rights and limitations directly on the recorder

▶ Open the DMVC App.

The (still empty) Locations dialog is displayed.

Fig. 3-4 Empty recorder list

▶ Tip the Menu button (upper left).

▶ Tip the recorders tab.

The (still empty) recorders list is displayed.

▶ Tip the button (upper right).

The New recorder dialog is displayed.


Fig. 3-5: Empty recorder definition

▶ Enter a text as recorder name. ▶ Confirm with Next.

Note the differences in procedure according to the access type (directly or via DMVC Server) as described in the following.

Note that Dallmeier recorders and DMVC Server support DynDNS routers.

3.4.2 access via DMVC Server

The access data defined in the DMVC Server are relevant if the recorder is connected to the network via a DMVC Server.

▶ Enter the defined name of the recorder as IP address internal. ▶ Confirm with Next. ▶ Enter the defined name of the user (end device) as Login name. ▶ Confirm with Next. ▶ Enter the password of the user (end device) as Password. ▶ Confirm with Next. ▶ Enter the external IP address of the server (router) as Server IP. ▶ Confirm with Next. ▶ Enter 3377 (or the port corresponding to the network settings) as Server port. ▶ Confirm with Done.

The connection is established.

The dialog recorder is displayed, and the configured recorder is available under its recorder name. He is also added to the Locations dialog.


3.4.3 Quality

The quality of the received video depends on bit rate (kbit/s), frame rate (fps) and the chosen resolution. The higher their values are, the more bandwidth is consumed.

Fig. 3-6

▶ Adjust the bitrate under WIFI or UMTS quality with the slider, if necessary. ▶ Regulate the WIFI or UMTS framerate (in fps) with the slider, if necessary.

The picture is fluid from a frame rate of 24 fps onward.

After the input of the access data “Full HD” is set up for the video quality by default. This setting can be adjusted in the “Locations” dialog for individual cameras.These settings are valid for all cameras of the recorder.

3.4.4 recorder editing/Deleting

Configured recorders can be edited in Recorders dialog.


▶ Tip the recorder button.

The recorder list is displayed.

Fig. 3-7 Recorder list


To edit a defined recorder tip the edit button of the necessary recorder.

The dialogue for recorder configuration is displayed.

▶ Proceed as described under “Add Recorder” on page 12. ▶ For deleting a defined recorder, tip the Delete button for the necessary recorder. ▶ Confirm with Yes.

3.4.5 System Status

The application can request and display general information (e.g. temperature, fan speed) from the de-fined recorders.This information can be accessed though the recorder dialog.


▶ Tip the recorder button.

The recorder list is displayed.


▶ Tip the System Status button .

The corresponding system information is displayed.

Fig. 3-9 Status-Dialog

▶ Tip Ok to close the status dialog.


3.5 CaMeraSThe application supports individual names and formats for cameras without regard to the actual con-figuration of the corresponding recording system.

▶ Click the Locations button in the navigation menu.


▶ Click the required recorder.

The camera list of the recorder is displayed.

Fig. 3-11 Camera list of the recorder

▶ Tip the Favorite button next to the required camera to add it to the favorite list (see “Camera

Resolution” on page 17)

▶ Tip the edit button next to the required camera to change name and resolution of the camera.


Fig. 3-12 Camera configuration

▶ Make the required settings as described in the following. ▶ Finally confirm with Save.

3.5.1 Camera Name

The camera name can be set without reference to the actual configuration of the corresponding record-ing system.

▶ Click the Camera name line. ▶ Enter the desired name. ▶ Confirm with Save.

3.5.2 Camera resolution

The image format for the display of the camera can be set without reference to the actual configuration of the corresponding recording system. The resolution for WiFi and UMTS can be selected separately.

Tip WiFi quality or UMTS quality to set the image format for each type of connection.

The dialogue Change resolution is displayed.

Fig. 3-13 Camera resolution

▶ Select an image format. ▶ Confirm with Save.


3.6 LIVe DISpLaYThe application supports quick and easy access to all cameras connected to the defined recorders.

▶ Tip the Locations button in the navigation dialogue.

Fig. 3-14: Recorder list

▶ Tip a recorder.

The camera list of the recorder is displayed.

Fig. 3-15 Camera list of the recorder

▶ Scroll up or down to find the relevant camera, if necessary. ▶ Tip the relevant camera to establish live access.


▶ Note that the camera name and the time correspond the settings within the application. Both may differ from the settings on the recorder.

Fig. 3-16 Live image

▶ Swipe left / right to switch to the previous / next camera. ▶ Use the two finger pinch-to-zoom gesture for zoom control.

The integrated tool bar offers further functions and access to the recorded images.

Change the standard resolution

Switch to playback mode

Activation of relays

Snapshot

Record

Switch to previous camera

Switch to next camera

A comprehensive description of the individual functions can be found in theDocumentation “Configuration and Operation” of the DMVC App.


PService

4.1 reQUIreMeNtSThe following requirements must be met for the installation of the software PService3:

• Operating system: Microsoft*) Windows*) 7 / 8 / 10 (32 / 64 bit)• Processor (CPU): Intel*) Core*) i3 at least 2.5 GHz or equivalent• Memory (RAM): DDR3, at least 4 GB• Disk space: 500 MB

The PService3 installer setup installs all required components on your system.

Note before the start, that administrator rights are required for installation.

4.2 INStaLLatIONProceed as follows in order to install the software PService3:

▶ Start the pService3_Setup.exe file.

The installation setup first checks whether all required runtime components are available on the system. For the execution of the application PService3 is the Microsoft Visual C++ 2013 redistributable package (x 86) required.The missing runtime components are installed on the first installation step if these packages are not available.

The installation will start directly with the introduction screen if the components are already installed on the system (see on page 22).


The following dialog is displayed for the installation of the Microsoft Visual C++ 2013 redistributable package (x86):

Fig. 4-1

▶ Click Install. ▶ Confirm the subsequent dialog of the User account Control if required.

The installation of the components will be executed automatically:

Fig. 4-2

The installation of the PService3 application then starts automatically.

Fig. 4-3

The introduction dialog is displayed for the installation of PService3:


Fig. 4-4

▶ Click Next >.

The dialog is displayed for the license agreement:

Fig. 4-5

▶ Read and confirm the dialog with the activation of the checkbox I accept the terms in the license agreement.

▶ Click Next >.


The dialog is displayed for selecting the installation directory:

Fig. 4-6

Change... the installation directory and select the desired directory with the file manager if required.

NOTICE

Error in program execution!A fixed here PService3 directory may not be changed after installation. Otherwise, future program updates can not be performed.

▶ Click Next >.

The dialog is displayed for the selection of the Setup type:

Fig. 4-7

▶ Select ...• Complete – to install all program features (recommended).• Custom – to select the program features to install.


If the “Custom” option is selected, the installation of the “HASP Driver” can be disabled in the following “Custom Setup” dialog if required.

▶ Click Next >.

The dialog is displayed for the start of the installation process:

Fig. 4-8

▶ Click Install in order to start the process. ▶ Confirm the subsequent dialog of the User account Control if required.

The installation will be executed:

Fig. 4-9


The dialog is displayed for the completion of the installation:

Fig. 4-10

▶ Click Finish.

4.3 CONFIGUratION

4.3.1 Start

To start the PService3 application after installation, follow these steps:

A shortcut is automatically created on the desktop.

▶ Double-click the shortcut on the desktop.

The user interface of the PService3 application is displayed. The local network is automatically scanned and the result is displayed in the Device Scanner view.


4.3.2 Broadcast Scanner

Fig. 4-11

All Dallmeier devices in a network are displayed in a list after a network scan with the Broadcast Scanner. This devices list can be sorted by columns or be filtered according to criteria (IP address, device number, serial number etc.).

▶ Use and manage the application PService3 as described in the documentation “Operation” for “PSer-vice3”.

4.3.3 Create System/project

After scanning the network, the network devices must be configured with their own system for mobile access.

4.3.3.1 Configure

To create your own system, proceed as follows:

▶ Select File > New from the menu bar.

A new system/project can also be created with the corresponding “New” button in the toolbar.


adding and logging in a deviceA new device is dragged and dropped from a scan list into the System main view and logged in with the login data. The device can also be assigned its own name for easier identification.

Alternatively, a new device can also be created via the context menu of the “System” main view. To establish a connection and retrieve device information, the IP address and user credentials of the device must be known.

▶ In the Device Scanner view, select the required device.

Fig. 4-12

▶ Drag and drop the device into the System main view.


The device is displayed withe the status Unknown (not yet scanned) :

Fig. 4-13

To connect to the device, the login data must be entered on the System property tab in the property view:

Fig. 4-14

▶ From the Login Mode dropdown box, choose the required login dialog. ▶ In the User Name/User password fields, enter the required login data for the device for the selected logon mode.


Fig. 4-15

▶ Right-click the device in the System view to open the context menu. ▶ Select Update Device Information.

Alternatively, after entering the credentials on the System Properties tab, press the F5 key to update the device information.

Multiple editing is possible with the same login. The corresponding login data are configured for all selected devices:


Fig. 4-16

▶ Select the required devices in the System main view. ▶ On the System propertiy tab, select the required login mode and enter the appropriate login data. ▶ Update the device information as described above.

After successful login, the status changes to Device available in the System property tab and to Green in the System view. In addition, the available device information is retrieved and displayed.

Fig. 4-17

You can also enter a name for the device:


Fig. 4-18

▶ On the System properties tab, in the User defined Name row, enter the desired name for the device.

The new name is automatically displayed in the corresponding column in the System view instead of the IP address:

Fig. 4-19

▶ Proceed as described above to add more devices in the System view.


4.3.4 Setting up DMVC Server

If all necessary components are in the System, the DMVC server can be configured.

Fig. 4-20

▶ Right-click the entry of the DMVC server. ▶ Click DMVC Server Configuration.

The DMVC Server Configurator opens.

Fig. 4-21


▶ Carry out the necessary steps for configuration (see below) ▶ Confirm with apply Configuration to complete the configuration.

4.3.4.1 Virtual server configuration

Virtual servers are used to group cameras together in specific groups, in order to make the assignmentSimplify access configuration for specific users and clients.

▶ Click add Virtual Server.

The Create Virtual Server dialog opens.

Fig. 4-22

▶ Enter a suitable Name of Virtual Server. ▶ Select a recorder. ▶ Confirm with OK.

The virtual server is now displayed in both the Virtual Server Configuration window and the DMVC2 access configuration for client and user.

edit virtual serverTo change the data of an existing virtual server, proceed as follows:

▶ Select the required virtual server in the Virtual Server Configuration window. ▶ Click the edit Virtual Server button. ▶ Make the necessary changes in the appropriate window. ▶ Confirm with OK.

Delete virtual server ▶ Select the required Virtual Server in the Virtual Server Configuration window. ▶ Click the Delete Virtual Server button. ▶ Confirm with OK.


4.3.4.2 Configuring Client access

This is where the different mobile devices that are to have access to the system are managed.

▶ Click add Client to add a new mobile device.

The Create Client dialog opens.

Fig. 4-23

▶ Enter a suitable name. ▶ Enter the Uid (see “Info Dialog” on page 11“Info Dialog” on page 12).

The device is now displayed both in the Client Access Configuration window and in the DMVC2 access Configuration for Client and User.

edit ClientTo change the data of an existing Client, proceed as follows:

▶ Select the required Client in the Client access Configuration window. ▶ Click the Change Client button. ▶ Make the necessary changes in the corresponding window. ▶ Confirm with OK.

Delete Client ▶ Select the required client in the Client access Configuration window. ▶ Click the Delete Client button. ▶ Confirm with OK.


4.3.4.3 Configuration of user access

Here the users can get the mobile access to the system to be created.

▶ Click Add User.

The Create User dialog opens.

Fig. 4-24

▶ Enter a User Name and User password.

edit userTo change the data of an existing Client, proceed as follows:

▶ Select the required user in the User access Configuration window. ▶ Click the Change User button. ▶ Make the necessary changes in the appropriate window. ▶ Confirm with OK.

Delete User ▶ Select the required user in the User access Configuration window. ▶ Click the Delete User button. ▶ Confirm with OK.

The user is now displayed both in the User access Configuration window and in the DMVC2 access Con-figuration for Client and User.#


4.3.4.4 DMVC access configuration for client and user

The DMVC access configuration window for client and user provides a clear and easy to use interface to the DMVC server. The ability to assign the required rights to the corresponding clients and users.

Fig. 4-25

The virtual servers with the individual cameras are listed as the first element of the table.the users and the clients.With the checkbox all, access to all tracks/live views of the virtual server is restricted.is granted. If this is not desired, you can use the respective checkboxes to select individual tracks/live views for access can be released.The following checkboxes are used to determine which clients are available to the user for this purpose.stand.

▶ Select the required checkboxes to allow a user or client access to the selected element.

New configuration ▶ Click the New Configuration button to delete the current configuration.


Change login settingsHere you can change the current login settings.

▶ Click the Change Login Settings button.

Fig. 4-26

▶ Make the necessary changes in the corresponding window. ▶ Confirm with OK.

reload configuration ▶ Click the reload Configuration button to load the current configuration on the server.

accept configuration ▶ Click the accept Configuration button to transfer the current configuration to the server..

HEAD & ACCOUNTS OFFICE

Dallmeier electronic GmbH & Co.KGBahnhofstr. 1693047 RegensburgGermany

tel +49 941 8700 0fax +49 941 8700 180mail [email protected]

www.dallmeier.com
