dmt – spc metallschutzprodukte auf trockenbasis dmt-spc dry protective coatings contain a mixture...
TRANSCRIPT
dMT – SPC Metallschutzprodukte auf Trockenbasis
dMT-SPC dry protective coatings contain a mixture of special components (no graphite) which create and continually maintain an optimal coefficient of friction between two surfaces
dMT – SPC Surface Protective Coatings
dMT - Surface Protective Coatings System for Support Trunnions and Ringson Kilns, Rotating Furnaces, Dryers, Mills, etc.
Rotating Drum Equipment
This picture shows a example of a SPC DRR-5.0L Block System with 5 spring-loaded, steel applicators. The number of required blocks / applicators or size of the unit depends upon the width of the trunnions or rings to be coated.
Type TSB-085-DRR Blocks are used on supporting trunnions without a drive function. SPC blocks are to be inserted from the rear side of each applicator.
Example: Block System with 5 Steel Applicators
SPC-TRB-100 blocks with steel applicators mounted against tyre surface
SPC-Coatings for trunnions and tyres of rotating furnaces, kilns, dryers
(noticable „mirror image“ on surface)
Rotating Drum Equipment
SPC-Coatings for trunnions and tyres on asphalt dryer with chain drive
June 2002 – installation of 2 sets of SPC DRR-T-2.0 kits each with 2 TRB-100-DRR blocks to reduce wear on rollers and tyre. Maintenance-free operation of kits.
Rotating Drum Equipment