dmt 121 electronic devices. chapter 1 introduction to semiconductor dmt 121 electronic devices
TRANSCRIPT
![Page 1: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/1.jpg)
DMT 121 ELECTRONIC DEVICES
![Page 2: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/2.jpg)
Chapter 1
Introduction to Semiconductor
DMT 121 ELECTRONIC DEVICES
![Page 3: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/3.jpg)
Semiconductor Materials
![Page 4: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/4.jpg)
Semiconductor Materials
• Definition: Semiconductors are a special class of elements having a conductivity between that of a good conductor and that of an insulator
![Page 5: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/5.jpg)
Semiconductor Materials
• Single crystal – Germanium (Ge) and Silicon (Si)
• Compound Semiconductor – Gallium Arsenide (GaAs), Cadmium Sulfide (CdS), Gallium Nitride (GaN) and Gallium Arsenide phosphide (GaAsP).
• Mostly used : Ge, Si and GaAs
![Page 6: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/6.jpg)
Semiconductor Materials
• Ge – First discovered. Used as Diode in 1939, transistor in 1947. Sensitive to changes in temperature – suffer reliability problem.
• Si – Introduced in 1954 (as transistor), less sensitive to temperature. Abundant materials on earth. Over the time – its sensitive to issue of speed.
• GaAs – in 1970 (transistor), 5x speed faster than Si. Problem – difficult to manufacture, expensive, had little design support at the early stage.
![Page 7: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/7.jpg)
Periodic Table
• Columns: Similar Valence Structure
Electropositive elements:Readily give up electronsto become + ions.
Electronegative elements:Readily acquire electronsto become - ions.
He
N e
Ar
Kr
Xe
Rn
inert
gase
s
acc
ep
t 1e
acc
ep
t 2e
giv
e u
p 1
e g
ive u
p 2
e g
ive u
p 3
e
F Li Be
Metal
Nonmetal
Intermediate
H
Na Cl
Br
I
At
O
S Mg
Ca
Sr
Ba
Ra
K
Rb
Cs
Fr
Sc
Y
Se
Te
Po
![Page 8: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/8.jpg)
Electropositive elements:Readily give up electronsto become + ions.
Electronegative elements:Readily acquire electronsto become - ions.
![Page 9: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/9.jpg)
Semiconductors, Conductors & Insulators
Conductors• Material that easily conducts electrical current.• The best conductors are single-element material (e.g
copper,silver,gold,aluminum,ect.)• One valence electron very loosely bound to the atom- free electron
Insulators• Material that does not conduct electric current under normal
conditions.• Valence electron are tightly bound to the atom – less free electron
Semiconductors• Material between conductors and insulators in its ability to conduct
electric current• in its pure (intrinsic) state is neither a good conductor nor a good
insulator• most commonly use semiconductor- silicon(Si), germanium(Ge), and
carbon(C).• contains four valence electrons
![Page 10: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/10.jpg)
Covalent Bonding & Intrinsic Materials
• Atom = electron + proton + neutron
• Nucleus = neutrons + protons
Protons (positive charge)
Neutrons (uncharged)
Nucleus(core of atom)
Electrons(negative charge)
ATOM
![Page 11: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/11.jpg)
Atomic Structure
No. of electron in each shell
Ne = 2(n)2
n = no of shell.
![Page 12: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/12.jpg)
Covalent Bonding
Covalent bonding of the Silicon atom
Covalent bonding of the GaAs crystal
![Page 13: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/13.jpg)
Intrinsic CarrierTable 1.1
Intrinsic Carriers
Semiconductor Intrinsic Carriers
(per cubic centimeter)
GaAs 1.7 x 106
Si 1.5 x 1010
Ge 2.5 x 1013
• Intrinsic (pure) carriers – The free electrons in a material due to only external causes
• Ge has the highest number of carriers and GaAs has the lowest intrinsic carriers.
• The term intrinsic (pure) is applied to any semiconductor material that has carefully refined to reduce the number of impurities to a very low level – essentially as pure as can be made available through modern technology
![Page 14: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/14.jpg)
Relative Mobility Factor µn
Table 1.2
Relative Mobility Factor
Semiconductor
µn (cm2/V-s)
Si 1500
Ge 3900
GaAs 8500
• Relative mobility – the ability of the free carriers to move throughout the material.
• GaAs has 5X the mobility of free carriers compared to Si, a factor that results in response times using GaAs electronic devices is 5X those of the same device made from Si.
• Ge has more than twice the mobility of electrons in Si, a factor that results in the continued of Ge in high-speed radio frequency applications.
![Page 15: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/15.jpg)
Difference between Conductors & Semiconductors
• Conductors – Resistance increases with the increase in heat, because their vibration pattern about relatively fixed location makes it increasingly difficult for a sustained flow of carriers through the material – positive temperature coefficient.
• Semiconductors – Exhibit an increased level of conductivity with the application of heat. As the temperature rises, an increasing number of valence electron absorb sufficient thermal energy to break the covalent bond and contribute to the number of free carriers – negative temperature effects
![Page 16: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/16.jpg)
Energy Level
Figure: Energy levels: conduction and valence bands of an insulator, a semiconductor, and a conductor.
![Page 17: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/17.jpg)
Extrinsic Materials : n-Type and P-Type Materials
• The characteristics of a semiconductor material can be altered significantly by the addition of a specific purity atoms to relatively pure semiconductor materials – this process is known as doping process
• A semiconductor that has been subjected to the doping process is called an extrinsic materials.
• Extrinsic Materials are n-type material [five valence electrons (pentavalent)] and p-type material [three valence electrons atom (trivalent)]
![Page 18: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/18.jpg)
N-Type Materials
• n-Type material is created by introducing the impurity (bendasing) elements that have five valence electrons (pentavalent).
• There are antimony (Sb), Arsenic (As) and phosphorous (P).
Figure: Antimony impurity in n-type material
Diffused impurities with five valence electrons are called donor atoms
![Page 19: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/19.jpg)
N-Type Materials
• The effect of this doping cause the energy level (called the donor level) appears in the forbidden band with Eg significantly less than intrinsic material.
• This cause less thermal energy to move free electron (due to added impurity) into conduction band at room temperature.
Figure: Effect of donor impurities on the energy band structure
![Page 20: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/20.jpg)
N-Type Material
• Pentavalent atoms is an n-type semiconductor (n stands for the negative charge on electrons).
• The electrons are called the majority carrier in n-type materials.• In n-type material there are also a few holes that are created when
electrons-holes pairs are thermally generated• Holes in n-type materials are called minority carrier.
![Page 21: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/21.jpg)
P-Type Material
• Si or Ge doped with impurities atoms having three valence electrons.
• Mostly used are boron (B), gallium (Ga) and indium (In).• The void (vacancy) is called ‘hole’ represented by small circle
or a ‘+’ sign.
Figure: Boron impurity in p-type material.
Diffused impurities with three valence electrons are called acceptor atoms
![Page 22: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/22.jpg)
P-Type Material
• In p-type materials the hole is the majority carrier and the electron is the minority carrier.
• Holes can be thought as +ve charges because the absence of electron leaves a net +ve charge on the atom.
![Page 23: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/23.jpg)
Electron vs Hole Flow
• With sufficient kinetic energy to break its covalent bond, the electron will fills the void created by a hole, then a vacancy or hole, will be created in the covalent bond that released the electron.
![Page 24: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/24.jpg)
Semiconductor Diode
Diode
• Simple construction of electronic device
• It is a joining between n-type and p-type material (joining one with majority carrier of electron to one with a majority carrier of holes)
![Page 25: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/25.jpg)
Diode @ No Bias (VD=0V)
![Page 26: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/26.jpg)
Forward Bias (VD > 0 V)
Figure: Forward-biased p–n junction. (a) Internal distribution of charge under forward-bias conditions; (b) forward-bias polarity
and direction of resulting current.
![Page 27: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/27.jpg)
Reverse Bias (VD < 0 V)
Figure: Reverse-biased p–n junction. (a) Internal distribution of charge under reverse-bias conditions; (b) reverse-bias polarity and direction of
reverse saturation current.
![Page 28: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/28.jpg)
Diode Characteristics Curve
Figure: Silicon semiconductor diode characteristics.
![Page 29: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/29.jpg)
Ge, Si and GaAs
Figure: Comparison of Ge, Si, and GaAs diodes.
![Page 30: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/30.jpg)
Temperature Effects
Figure: Variation in Si diode characteristics with temperature change.
![Page 31: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/31.jpg)
Ideal Vs Practical
• Semiconductor diode behaves in a manner similar to mechanical switch that can control the current flow between it’s two terminal
• However, semiconductor diode different from a mechanical switch in the sense that it permit the current flow in one direction
![Page 32: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/32.jpg)
Ideal Vs Practical
Figure: Ideal semiconductor diode:(a) forward-biased (b) reverse-biased.
05
0
mA
V
I
VR
D
DF
mA
V
I
VR
D
DR
0
20
(Short circuit equivalent –fwd bias, actual case R ≠ 0)
(Open circuit equivalent – Reverse bias, actual case saturation current Is ≠ 0)
Figure: Ideal versus actual semiconductor characteristics.
![Page 33: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/33.jpg)
Approximate Diode
![Page 34: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/34.jpg)
Resistance Levels
DC or Static Response• Application of dc voltage will result in an operating
point on the characteristic curve will not change with time.
D
DD
I
VR
In general, the higher the current
through a diode, the lower is the
dc resistance level.
Figure: Determining the dc resistance of a diode at a particular operating
point.
![Page 35: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/35.jpg)
Resistance Levels
dd
dd
I
mV
I
Vr
26
Figure: Defining the dynamic or ac resistance.
AC or Dynamic Response
![Page 36: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/36.jpg)
Resistance Levels
d
dav
I
Vr
Figure: Determining the average ac resistance between indicated limits.
Average AC Response
![Page 37: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/37.jpg)
Diode Equivalent Model
dLIMIT
BIASF
dLIMITFBIAS
dFVF
rR
VVI
VrRIV
rIV
7.0
7.0
7.0
][ LIMITFBIAS RrIV R
![Page 38: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/38.jpg)
Example 1
Determine the forward voltage (VF) and forward current [IF]. Alsofind the voltage across the limitingresistor. Assumed rd’ = 10 at the determined value of forward.
VkmARIV
mVmAVrIVV
mAk
VV
rR
VVI
LIMITFR
dFF
dLIMIT
BIASF
LIMIT21.9)1)(21.9(
792)10)(21.9(7.07.0
21.9101
7.0107.0
'
'
![Page 39: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/39.jpg)
Example 2
Determine the Reverse voltage (VR). Alsofind the voltage across the limiting resistor. Assumed IR = 1 µA.
Answer:
VRLIMIT =1mV
VR=4.999V
![Page 40: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/40.jpg)
Diode Testing
• Analog MM (or Ohm meter testing)
Figure: Checking a diode with an ohmmeter.
![Page 41: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/41.jpg)
Diode Testing
• Digital MM
Figure: DMM diode test on a properly functioning diode.
![Page 42: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/42.jpg)
Diode Testing – Defective diode
• Digital MM (Testing Defective Diode)
Diode failed open: get open circuit reading (2.6 V) or ‘OL’
Diode is shorted: get 0 V reading in both forward and reverse bias test.
![Page 43: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/43.jpg)
Diode Notation
![Page 44: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/44.jpg)
Zener Diode
Figure: Characteristics of Zener region.
Figure: Conduction direction: (a) Zener diode (b) semiconductor diode
(c) resistive element.
![Page 45: DMT 121 ELECTRONIC DEVICES. Chapter 1 Introduction to Semiconductor DMT 121 ELECTRONIC DEVICES](https://reader035.vdocuments.us/reader035/viewer/2022062308/56649f045503460f94c179fa/html5/thumbnails/45.jpg)
Zener Zener Region
• The Zener region is in the diode’s reverse-bias region.
• At some point the reverse bias voltage is so large the diode breaks down and the reverse current increases dramatically.
• This maximum voltage is called avalanche avalanche (runtuhan) breakdown (runtuhan) breakdown voltagevoltage
• The current is called avalanche currentavalanche current.