DMP Product Portfolio Femtosecond LasersFemtosecond Lasers

Trestles Ti:Sapphire lasers.............…….20-100 fs; 710-840 nm, 150-500 mW

Mavericks Cr:Forsterite lasers................60 fs; 1230-1270 nm; 180-250 mW

Buccaneer Er-doped fiber laser………..150-300 fs; 1560 nm; 100mW

Femtosecond Measuring ToolsFemtosecond Measuring ToolsReef Autocorrelators………………………………..700-1300 nm; 10 fs-6 ps

Rincon Cross-correlator…………………………….800-1250nm; 20 fs

AVOCA Spider phase measurement spectrometers..740-800 nm; 10-120 fs

Amplified SystemsAmplified SystemsJAWS Cr:Forsterite Multi-Terawatt Amplified laser...1240 nm; 80 fs; 2 TW CORTES Ti:Sapphire Amplified laser……………….795-820 nm; 30 fs; 1 J

Femtosecond AccessoriesFemtosecond AccessoriesFaraday isolators; IR viewers; laser attenuators; frequency conversion;

pulse pickers; laser spectrometers; wavelength selection

Femtosecond LasersTrestles Ti:Sapphire lasers

Mavericks Cr:Forsterite lasers

Buccaneer Er-doped fiber laser

Pulse duration: < 70 fs Tuning range: 1230-1270 nm Output power: 180-250 mWRecommended pump power: 6-10 WRepetition rate: 75/100/125 MHzOutput stability: < 2% rms Spatial mode: TEMooDivergence: < 2 mrad Crystal cooling: thermoelectric

Pulse duration: < 70 fs Tuning range: 1230-1270 nm Output power: 180-250 mWRecommended pump power: 6-10 WRepetition rate: 75/100/125 MHzOutput stability: < 2% rms Spatial mode: TEMooDivergence: < 2 mrad Crystal cooling: thermoelectric

Pulse Width (FWHM): < 150-300 fs Wavelength: 1560 ±10 nm Average output power: > 100 mW Peak output power: up to 10 kV Repetition rate: 40-80 MHz Power output: >100 mW, TEM00, linearly polarized or fiber output (FC/APC)

Service optical output: FC/APC (~1 mW) RF Out: SMAMode Lock Status: SMA

Pulse Width (FWHM): < 150-300 fs Wavelength: 1560 ±10 nm Average output power: > 100 mW Peak output power: up to 10 kV Repetition rate: 40-80 MHz Power output: >100 mW, TEM00, linearly polarized or fiber output (FC/APC)

Service optical output: FC/APC (~1 mW) RF Out: SMAMode Lock Status: SMA

Pulse duration: 20-100 fsTuning range: 700--960 nmOutput power at 800 nm: 150-1500mWSpatial mode: TEMooPump power: 3-10 WPulse energy: 1-15 nJ

Repetition rate: 93-100 MHz

Pulse duration: 20-100 fsTuning range: 700--960 nmOutput power at 800 nm: 150-1500mWSpatial mode: TEMooPump power: 3-10 WPulse energy: 1-15 nJ

Repetition rate: 93-100 MHz

Small footprintTurn-key operation

Highly stable

The most popularin industry

High resolution imagingBroadband absorption

Material processing

Femtosecond Measuring ToolsRincon Cross-correlator

Wavelength: 700-1500 nmDynamic range: 108 (in window 104) Temporal range: 950 ps Input pulse energy: (40-50 fs pulse),< 500 µJPulse duration: > 20 fsRepetition rate: < 100 HzInput polarization: linear, horizontal Resolution: 150 fs (time window 2 ps)400 fs (window 12 ps) Power supply: 220 V, 50/60 Hz± 10%

Wavelength: 700-1500 nmDynamic range: 108 (in window 104) Temporal range: 950 ps Input pulse energy: (40-50 fs pulse),< 500 µJPulse duration: > 20 fsRepetition rate: < 100 HzInput polarization: linear, horizontal Resolution: 150 fs (time window 2 ps)400 fs (window 12 ps) Power supply: 220 V, 50/60 Hz± 10%

Reef AutocorrelatorsWavelength range: 700-1000 nm;1000-1400 nmPulse duration range: 20-200 fs; 200–2000 fsInput pulse energy: >500 nJ (1-10 Hz); >50 nJ (>1 kHz)Input repetition rate: 1-10 Hz (single-shot mode); >10 Hz (multiple-shot mode)Input polarization, linear: horz.,vert.

Wavelength range: 700-1000 nm;1000-1400 nmPulse duration range: 20-200 fs; 200–2000 fsInput pulse energy: >500 nJ (1-10 Hz); >50 nJ (>1 kHz)Input repetition rate: 1-10 Hz (single-shot mode); >10 Hz (multiple-shot mode)Input polarization, linear: horz.,vert.

Wavelength range: 740-880 nmPulse duration range: 12-40 fs/ 30-120 fs/ 6-15 fsSensitivity: min. average power 100 mW at 100 MHz; 0.1 mJ in single-shot modeInput pulses repetition rate: from 1 kHz to CW/singleInput polarization, linear: horizontal

Wavelength range: 740-880 nmPulse duration range: 12-40 fs/ 30-120 fs/ 6-15 fsSensitivity: min. average power 100 mW at 100 MHz; 0.1 mJ in single-shot modeInput pulses repetition rate: from 1 kHz to CW/singleInput polarization, linear: horizontal

AVOCA Spider

Oscillator or amplifier tuning

Solid target experiments- Measuring of ASE level

- Time-resolved experiments- Pulse duration and shape control

Alignment of high power laser systems

ultrafast laser diagnostics in the telecommunications band.

a unique combination of simplicity, versatility, and power range

capabilities in an economic, self-contained platform

Amplified SystemsWavelength: 1250 nmPulse duration (FWHM): 60-80 fsPulse power: 1-2 TWOutput stability: <2% RMSRepetition rate: 10 Hz Beam divergence: <2 mrad Spatial Mode: TEMoo Polarization, linear: horizontalContrast ratio: >1000:1

Wavelength: 1250 nmPulse duration (FWHM): 60-80 fsPulse power: 1-2 TWOutput stability: <2% RMSRepetition rate: 10 Hz Beam divergence: <2 mrad Spatial Mode: TEMoo Polarization, linear: horizontalContrast ratio: >1000:1

Energy: 1 nJPulse duration (800 nm): 40 fsRepetition rate: 10-100 HzPump energy (532 nm, < 200 ns): 10 mJWavelength: 750-850 nmPulse duration: < 50 fs Repetition rate: 50/100/1000 HzEnergy: 0.5 mJ

Energy: 1 nJPulse duration (800 nm): 40 fsRepetition rate: 10-100 HzPump energy (532 nm, < 200 ns): 10 mJWavelength: 750-850 nmPulse duration: < 50 fs Repetition rate: 50/100/1000 HzEnergy: 0.5 mJ

JAWS Cr:Forsterite Multi-Terawatt Amplified laser

CORTES Ti:Sapphire Amplified laser

Applications: • time-resolved spectroscopy • telecommunications• photochemistry• photobiology • plasma physics• x-ray generation• multispectral• atmospheric lidar• material processing

Applications: • time-resolved spectroscopy • telecommunications• photochemistry• photobiology • plasma physics• x-ray generation• multispectral• atmospheric lidar• material processing

Femtosecond Accessories

Peak isolation: 38 dB Transmission: (1064nm, 800nm) >90%Broadband models

Peak isolation: 38 dB Transmission: (1064nm, 800nm) >90%Broadband models

Faraday optical isolators

High transparent (HT) single stage isolators Single stage isolators with side exit (SE) Narrowband adjustable isolatorsBroadband isolatorsDouble stage isolatorsIsolators for infrared optical range

Harmonic generators

Pulse pickers

• Second harmonic generatorInput wavelength range: 710-960; 1250 nm Input pulse width: > 20 fsConversion efficiency: 20-40%• Third harmonic generatorInput wavelength range: 750-900 nm Input pulse width: > 20 fsConversion efficiency: 2-8%

• Second harmonic generatorInput wavelength range: 710-960; 1250 nm Input pulse width: > 20 fsConversion efficiency: 20-40%• Third harmonic generatorInput wavelength range: 750-900 nm Input pulse width: > 20 fsConversion efficiency: 2-8%

Output voltage: 4-8/ 6-12 kVRepetition rate: 1/10/25/50 kHzRise time: < 1-10 nsJitter: < 0.2 nsInput sync signal: optical or TTLSync repetition rate: 10-150 MHzAdjustable delay: 0 - 4 ms

Output voltage: 4-8/ 6-12 kVRepetition rate: 1/10/25/50 kHzRise time: < 1-10 nsJitter: < 0.2 nsInput sync signal: optical or TTLSync repetition rate: 10-150 MHzAdjustable delay: 0 - 4 msIR viewers

laser attenuators

laser spectrometers

wavelength selection