WWW.DATACOM.IND.BR

DM 810 Super Compact NG-SDH Access Platform

FEATURES

Non-modular STM-1/4 Compact 1U-high SDH-NG access platform Built-in 2,8G non-blocking cross-connection matrix supporting STM-1/4, Fast Ethernet, Gigabit

Ethernet and E1 interfaces Available in several versions for different applications and requirements

o DM 810-2STM1+8E1 o DM 810-2STM4+8E1 o DM 810-2STM4+63E1 o DM 810-2STM4-8E1-4GbE o DM 810-2STM4-63E1-4GbE

Available with STM-1 or STM-1/4MR (Multi-Rate interfaces) via SFP slot STM-1 electrical interfaces available through SFPs Next Generation Ethernet-over-SDH services fully supported with Virtual Concatenation, GFP

multiplexing and LCAS standards compliance (ITU-T G.707, G.7041/7042). The DM 810 platform can operate in Point-to-Point (Terminal mux), Star, Ring and/or Meshed

topologies. Extensive protection mechanisms including: SNCP and MSP line protection. Advanced Ethernet services including Layer2 switching, VLAN tagging, QoS/CoS DiffServ, flow

and bandwidth control. Support of EAPS loop protection and Spanning Tree protection protocols Built-in Frame Relay, PPP router for data and management. Two slots for AC/DC full range power supplies. Optional redundancy.

Variety of synch schemes supported as well as alarms and service voice channel

Element management via HTTP and full NMS capabilities with DMView Enterprise DM 800Plus. DESCRIPTION

The DM 810 is a compact non-modular SDG-NG access platform. The DM 810 is ideal for small

applications and for sites with space and power consumption problems.

The 810 is available on various versions, allowing operators to optimize it's investment

WWW.DATACOM.IND.BR

Number of Interfaces

STM

-1

(S

FP

)

STM

-1/

4

(S

FP

)

G.7

03

/2

Mb

ps

(R

J4

5)

G.7

03

/2

Mb

ps

(LFH

)

Gb

E

Co

mb

o

(S

FP

or

RJ45

)

Gb

E

Ele

ctr

ica

l (R

J45

)

DM810-2STM1+8E1 2 - 8 - - - DM810-2STM4+8E1 - 2 8 - - - DM810-2STM4+63E1 - 2 - 63 - DM810-2STM4+8E1+4GbE - 2 8 - 2 2 DM810-2STM4+63E1+4GbE - 2 - 63 2 2

The DM 810 complements the DM 880/881/830/820 family providing cost-effective access solutions and supporting multi-service interfaces for voice/data convergence.

The 10/100/1000Mbps Gigabit Ethernet interface modules adhere to the latest Next-Generation standards and support VCAT-Virtual Concatenation, GFP-Generic Framing Procedure and LCAS-Link Capacity Adjustment Scheme among others. These features ensure interoperability with other vendors and enable easy integration into existing SDH networks. These modules also

support Layer 2 switching with VLAN functionalities and Class of Service (classifying services according to port, VLAN tag or DSCP) in addition to Flow and Bandwidth Control guaranteeing constant data flow.

In order to provide advanced IP/Ethernet services the DM 810 also supports Spanning Tree (STP-IEEE 802.1D, RSTP-IEEE 802.1W and MSTP-IEEE 802.1S) protocols and EAPS loop protection according to RFC 3619

Ethernet traffic can be mapped into the SDH matrix over 8xVC4, 24xVC3 or 252xVC12 data rates In order to maximize deployment, STM-1/4 interfaces are provided via SFP (Small Form factor

Pluggable) modules providing an extensive array of options for different wavelengths and ranges capabilities. All modules are hot-swappable allowing for the addition or exchange of services in real-time with minimal network downtime.

Several SDH protection mechanisms are supported ensuring system configuration flexibility and interoperability with other vendors:

o MSP-Multiplex Section Protection for 1+1 link redundancy. o SNCP-Sub-Network Connection Protection for path redundancy, per VC12, VC3 and VC4.

On the DM 810 performance monitoring reports are available via Element and Network management systems, enabling operators to engineer traffic on the most effective matter.

The DM 810 configuration can be performed via: o Terminal (or VT1000 emulator)

o Telnet (Ethernet port) or DCC remote management using built-in router o WEB (HTTP) interface

Terminal and Telnet allow for Network Parameter configuration while the WEB interface (Shelf View) permits the operator to see device status including interfaces and modules through a user–friendly GUI. The Shelf View provides status indicators for the power supplies, temperature, interface modules, MPUs, MPU interfaces and alarms in addition to configuration of all parameters in all modules and levels.

Network and Circuit Management and Configuration Tasks are executed via the DM View Enterprise DM 800Plus module. This module allows the operator to benefit from carrier-class NMS, providing among others, the following functionalities:

o Failure identification and diagnostics o NE-Network Element configuration o Network provisioning (circuit service center) o Topological maps

WWW.DATACOM.IND.BR

o Inventory reports o Performance reports

o Users, groups and permissions - security The 810 is a highly reliable and compact platform, available also with connectors for alarms,

service channel with DTMF signaling and with various options for synchronization or clock recovery.

Full range AC/DC power supply enhance the DM 810 flexibility and logistics, enabling the platform to be installed anywhere on the network regardless of the available power supply without the need for special ordering and stocking option

APPLICATIONS Fig.1 – Cost-effective and compact access SDG-NG platform

Fig.2 – Point-to-Point, Multipoint EVCs (Ethernet Virtual Connections) over SDH

WWW.DATACOM.IND.BR

SPECIFICATIONS

Interfaces and Services

SDH Interfaces The DM 810 can be equipped with 2 types of SDH interfaces: STM-1 or STM-1/4 multi-rate SFP modules, supporting a wide range of wavelengths and ranges (see ORDERING)

STM-1 electrical interfaces also available through SFP

Add-Drop and Terminal Multiplexer SDH applications

Support of SNC and MSP 1+1 protection

PDH Interfaces 8 or 63 x E1/2Mbps G.703 interfaces

8 x RJ45 connectors or LFH connector

2Mbps transparent traffic mapping on SDH ports

Ethernet Interfaces 10/100/1000Mbps Gigabit Ethernet interfaces available with RJ45 connectors

and/or SFPs for optical interfaces

Auto-negotiation support, auto-MDI and MDI-X

L2 switching with IEEE 802.1Q VLAN and Q-in-Q support

Jumbo and Pause frames support

STP (IEEE 802.1D), RSTP (IEEE 802.1W) and MSTP (802.1S) support

EAPS loop protection, according to RFC 3619

Support of QoS based on DSCP or CoS bits as per IEEE 802.1p

Ethernet traffic mapping using GFP encapsulation, Virtual Concatenation and LCAS

Virtual Concatenation capacity up to 8xVC4 or 24xVC3 or 252xVC12

Allows use of Ethernet interfaces in transparent mode to carry point-to-point traffic

Management and Control

RS232 and Ethernet interfaces for local/remote management

Support of DCC remote management via internal router

Synchronism module and clock recovery supported on E1 and SDH interfaces or G.703 2MHz input connector

Support of 2 input and one output external alarms

EOW service voice channel with DTMF signaling

Access to management channel by V.11 interface

Graphic web-base local, element management

DMView NMS for network management and end-to-end provisioning

General

Dimensions Width: 433 mm (19") Height: 44 mm (2U) Depth: 270 mm

Weight Up to 4,2 kg (includes FAN)

Environmental Operation Temperature: 0o to 55o C Storage / Transportation: -40o to 70o C Humidity: 10% up to 95% non-condensing

Electrical Power Input: AC/DC full range (100-240VAC and -36-60VDC), redundancy option

Power Consumption: up to 75W

Standards Compliance (partial list) ITU-T G.703, G.704, G.707, G.773, G.783, G.806, G.813, G.823, G.825, G.826, G.841, G.842, G.957,

G.958, G.691, G.692 G.7041, G.7042, V.11, T.50 IEEE 802.3, 802.3u, 802.3z, 802.3ab, 802.3x, 802.3ac, 802.1Q, 802.1p, 802.1S, 802.1W, 802.1D

IETF RFC1157, RFC1812, RFC1213, RCF3619

WWW.DATACOM.IND.BR

ORDERING

DM810-2STM1+8E1 Compact STM-1/4 SDH-NG access node. 2xSTM-1 ports plus 8xE1. AC/DC full range

DM810-2STM4+8E1 Compact STM-1/4 SDH-NG access node. 2xSTM-1/4 ports plus 8xE1. AC/DC full range

DM810-2STM4+63E1 Compact STM-1/4 SDH-NG access node. 2xSTM-1/4 ports plus 63xE1. AC/DC full range

DM810-2STM4+8E1+4GbE Compact STM-1/4 SDH-NG access node. 2xSTM-1/4 ports plus 8xE1 and 4GbE ports AC/DC full

range

DM810-2STM4+63E1+4GbE Compact STM-1/4 SDH-NG access node. 2xSTM-1/4 ports plus 8xE1 and 4GbE ports. AC/DC

full range

Accessories

RB13-BNC/RJ45/IEC - 19", 2U panel with 32xE1 (1U for E1 RJ45 version). Used with IC32E1 (HW2) and IC63E1

interface cards. LFH connector, cable sold separately

DM810-PSU - AC/DC full range power supply module for DM 810

SFP modules STM-4

SFP SS13/STM-4MR (S4.1) optical module; singlemode; multi-rate; 1310nm; ~2km range SFP SS13/STM-4 (S4.2) optical module; singlemode; 1550nm; ~15km range SFP SL13/STM-4 (L4.1) optical module; singlemode; 1310nm; ~50km range SFP SL15/STM-4 (L4.2) optical module; singlemode; 1550nm; ~80km range SFP SLx15/STM-4 (ExtL4.2) optical module; singlemode; 1550nm; ~110km range SFP SSB13/STM-4 (DD) optical module; singlemode; single fiber; 1310nmRx/1550nmTx; ~20km range SFP SSB15/STM-4 (DD) optical module; singlemode; single fiber; 1550nmRx/1310nmTx; ~20km range STM-1 SFP SS13/STM-1 (S1.1) optical module; singlemode; 1310nm; ~30km range

SFP SS15/STM-1 (S1.2) optical module; singlemode; 1550nm; ~50km range SFP SL13/STM-1 (L1.1) optical module; singlemode; 1310nm; ~40km range SFP SL15/STM-1 (L1.2) optical module; singlemode; 1550nm; ~100km range SFP SLx15/STM-1 (ExtL1.2) optical module; singlemode; 1550nm; ~120km range SFP SSB13/STM-1 (DD) optical module; singlemode; single fiber; 1310nmRx/1550nmTx; ~25km range SFP SSB15/STM-1 (DD) optical module; singlemode; single fiber; 1550nmRx/1310nmTx; ~25km range SFP SLB13/STM-1 (DD) optical module; singlemode; single fiber; 1310nmRx/1550nmTx; ~60km range SFP SLB15/STM-1 (DD) optical module; singlemode; single fiber; 1550nmRx/1310nmTx; ~60km range SFP STM-1E G.703 electrical module

©2012 DATACOM. All rights reserved. Features and Specifications are subject to change without prior notice. *All other brands/names/trademarks are the property of their respective owners.

For more details please contact with DATACOM – contact@datacom.ind.br ; sales-dtc@datacom.ind.br