dlq - adlq
TRANSCRIPT
Type ADLQRecommended for room heights from 2.6m to 4.00m
SA2/18/EN/4
Ceiling Diffusers
TROX (South Africa) (Pty) Ltd.10 Wigford RoadMasons MillPietermaritzburg
Tel. +27 (0)33 398 1006Fax. +27 (0)33 398 1100email : [email protected]: www.troxsa.co.za
Description
Square ceiling diffusers type ADLQ (aluminium) are ideal for flush mounting in ceilings. They are suitable for use in rooms with heights up to 4.00 m.The recommended supply air temperature differential is -10K. Ceiling diffusers can be used both for supply and extract ap-plications.With a fixed blade arrangement the ceiling diffusers are mainly suitable for horizontal discharge. Specially developed ancillar-ies and plenum boxes, with optional flow rate control dampers, are available to ensure optimum discharge characteristics.
Contents • Description
Description • Discharge Directions 2
Construction • Dimension 3Installation • Assembly • Materials 4Selection Data 5Technical Data 6Order Details 7
22
DLQ-1/ADLQ-1
DLQ-2E/ADLQ-2E
ADLQ-3
DLQ-2/ADLQ-2
2
DLQ-1/ADLQ-1
DLQ-2E/ADLQ-2E
DLQ-3/ADLQ-3
DLQ-2/ADLQ-2
2
DLQ-1/ADLQ-1
ADLQ-2E
DLQ-3/ADLQ-3
DLQ-2/ADLQ-2
DLQ-4/ADLQ-4
2
1
DLQ-2E/ADLQ-2E
DLQ-3/ADLQ-3
ADLQ-2
DLQ-4/ADLQ-4
2
ADLQ-1
DLQ-2E/ADLQ-2E
DLQ-3/ADLQ-3
DLQ-2/ADLQ-2
DLQ-4/ADLQ-4
ADLQ-4
Construction • Dimensions
ConstructionThe face section of the type ADLQ diffuser consists of a pe-ripheral border, fixed air control blades and a centre cone. The diffuser face section is fitted or removed by means of a central fixing screw. The screw head is then covered with a decorative cap. Types ADLQ are available as a diffuser face complete with plenum box and side entry spigot, or with the following ancillaries:
-...-A face section only -...-AR with rear mounting ring-...-CK with opposed blade volume control damper adjustable from diffuser face -...-C with double flap damper adjustable from diffuser face The use of versatile ancillaries for standard or duct mount-ing subframes or for installation in vertical ducts, results in great flexibility in installation for this type of diffuser. For easy adjustment of volume flow rate the plenum box is equipped, if required, with a test point for measuring pressure and a volume control damper which can be adjusted by a cord. The plenum box with side entry spigot can be used with vari-ous TROX air diffusers providing the combined technical data is taken into account.
SIZE Q1 Q2 D K H
1 244 192 100 140 246
2 300 248 150 196 296
3 356 304 175 252 321
4 412 360 200 308 346
5 468 416 250 364 396
6 495 446 300 394 446
7 595 543 350 492 496
8 623 571 350 519 496
Types ADLQ
Diagram 4 - “C” Damper
Diagram 3 - ‘CK’ Damper
Diagram 2 - ‘AR’ with rear monitoring ring
Diagram 1 - ‘A’ face only
Plenum Box
‘DLQ/ADLQ-A’ type plenum
3
‘DLQ/ADLQ-CK’ type plenum
NECK
NECK
Q2
Q1
Q2
Q1
Q1
K
K
Q2
Q1
Q2
Q1
NECK
125
50
69
H
Q1
112
6946
H
Installation • Assembly • Materials
Installation • AssemblyType ADLQ ceiling diffusers can be adapted for use in almost all situations using the accessories available. All sizes are suit-able for mounting flush with the ceiling.
The plenum box is suspended on wire or straps using the holes provided. The seal is fixed to the edging of the plenum box.The diffuser face is fixed to the plenum box by the centre screw and the cross bridge provided.
If a vertical rigid duct is provided on site the diffuser can be fixed by means of a cross bridge and centre screw, or directly to the neck of the diffuser, e.g., by self-tapping screws. For these types of fixing the AR can be used. A duct mounting subframe can be supplied for constructions without plenum boxes. The following examples show the various types of installation.
Materials ADLQThe diffuser face is in extruded aluminium sections. The rear ancillaries are in formed sheet steel. The surfaces are phosphate treated and black stove enamelled .
Plenum box of galvanised sheet steel.
Mounting
A-type (face fitting) installation bracket
Material:Sheet steel, black stove enamelled finish.
B- type (neck fitting) duct installation bracket
Material:Sheet steel, black stove enamelled finish
4
Standard subframe
Fixing in Brickwork Fixing in wooden ceiling
Duct cross bar
Support by others
Q2 - 50
Q2
Q1
140
130
Technical Data
SIZE 1 2 3 4 5 6 7 8
m3/h □neck (mm) 137 193 249 305 361 388 488 516
150
veff (m/s)∆p (Pa)dB (A)
throw(m)
41021
0.9 / 1.5
2.2536
0.5 / 1.1
200
veff (m/s)∆p (Pa)dB (A)
throw(m)
5.31628
1.4 / 2.1
3.1511
0.9 / 1.6
2211
0.8 / 1.3
250
veff (m/s)∆p (Pa)dB (A)
throw(m)
6.62634
1.6 / 2.6
3.8921
1.2 / 2
2.438
0.9 / 1.5
300
veff (m/s)∆p (Pa)dB (A)
throw(m)
8.15046
1.8 / 3.1
4.51223
1.4 / 2.4
2.8511
1.1 / 1.9
227
0.9 / 1.5
350
veff (m/s)∆p (Pa)dB (A)
throw(m)
5.21527
1.7 / 2.8
3.3613
1.4 / 2.1
2.238
1.1 / 1.8
400
veff (m/s)∆p (Pa)dB (A)
throw(m)
6.12132
1.9 / 3.1
3.7818
1.5 / 2.5
2.5310
1.3 / 2
1.817
1 / 1.7
450
veff (m/s)∆p (Pa)dB (A)
throw(m)
6.82735
2 / 3.
4.21022
1.7 / 2.7
2.8512
1.4 / 2.2
228
1.1 / 1.9
500
veff (m/s)∆p (Pa)dB (A)
throw(m)
7.53539
2.4 / 3.9
4.61425
1.8 / 3
3.2614
1.5 / 2.5
2.239
1.4 / 2.1
1.918
1.2 / 2
600
veff (m/s)∆p (Pa)dB (A)
throw(m)
95045
2.8 / 4.5
5.61932
2.3 / 3.7
3.9923
1.8 / 3
2.7512
1.5 / 2.5
2.4210
1.4 / 2.4
700
veff (m/s)∆p (Pa)dB (A)
throw(m)
6.82637
2.5 / 4.3
4.51225
2 / 3.5
3.1515
1.7 / 3
2.7512
1.6 / 2.6
1.7110
1.4 / 2.1
800
veff (m/s)∆p (Pa)dB (A)
throw(m)
7.83641
2.9 / 5
5.11529
2.4 / 4
3.6820
2 / 3.4
3.1515
1.8 / 3
1.9112
1.5 / 2.5
900
veff (m/s)∆p (Pa)dB (A)
throw(m)
8.44243
3.3 / 5.5
5.71932
2.7 / 4.5
41024
2.3 / 3.8
3.56.519
2.1 / 3.5
2.223/213
1.7 / 2.8
2213
1.6 / 2.6
1000
veff (m/s)∆p (Pa)dB (A)
throw(m)
9.55748
3.6 / 6
6.32235
3 / 5
4.41226
2.5 / 4.2
3.8923
2.3 / 3.9
2.36314
1.8 / 3
2.17314
1.7 / 2.9
5
Selection Data
Technical Data
ADLQ-CK and C
6
Size
ADLQ 4 way
1 2 3 4 5 6 7 8
1.0 0.75 0.5 0.4
0.3
1 2 3 4 5 10
effe
ctiv
e je
t ve
loci
ty [m
/s]
pre
ssur
e d
rop
dp
[Pa]
max
imum
cor
ed ve
locit
y [m
/s]
10
87
65
4
3
2
9
100
10
20
30
40
50
5
2 3 4 5 6 10
effective jet velocity [m/s]
effective jet velocity [m/s]
1000
3000
20001500
500400
300
200
air volume Q [m
3/h]
55
25% open
43
2
50% open
100% open
0.15m 0.2m
0.3m
0.4m
0.5m
Airsteam depth
45
40
35
30
25
45
40
35
30
25
L [d
B(A)
]
Nn
Order Details
Specification TextSquare ceiling diffuser for flush mounting, suitable for horizontal discharge, comprising diffuser face with mitred perimeter border, border has rear sealing strip, fixed air control blades, central fix-ing screw with decorative cap. Optional ancillaries: rear mount-ing ring, opposed blade damper adjustable from the front face, double flap damper adjustable from the front face; (alternatively with spigot damper). The plenum box also has hanging cleats for suspending the assembly from the ceiling slab.
Materials ADLQThe diffuser face is in extruded aluminium sections, powder coated textured white VEP1595 rear ancillaries in formed sheet steel, surfaces phosphate treated and stove-enamelled black.
Order Code
ADLQ -CK -V - L - M - 0 / wxhxØ 0 FOF/ / / / *
A - Face onlyCK - OBD
0 - No plenumV - Top EntryH - Side EntryU - UnlinedL - Linded
0 - No spigot damper
M - With spigot damper
0 - Without installation subframeA - Standard subframe B - Duct cross bar*C - Ceiling Adapter Plate 595 x 595 495 x 495* - to be specified on order
Fixed Core Only
OOOrrrdddeeerrr EEExxxaaammmpppllleee
Make: TROXType: ADLQ - CK - V - U - 0 / 595 X 595 x 250Ø / OF / 4 / 0 / RAL9016 / F
OF - OverflangeN - Neck
Standard Sizes1 to 10
Odd Sizes eg:595 x 595 OF450 x 450 N300 x 300 N
7
4 /
Blow Pattern:
122E34
Type
0 - Standard White RAL90160 - Standard White RAL90100 - Painted to NA ColourP1 - Powder Coated to RAL...
State Colour
Des
ign c
han
ges
res
erve
d •
All
rights
res
erve
d ©
TRO
X (
South
Afr
ica)
(Pt
y) L
td O
ctober
2005
8