diy bridal jewelry how to make string bracelets with white nylon thread
TRANSCRIPT
DIY bridal jewelry-how to make string bracelets
with white Nylon thread
Dressing up for a wedding is perhaps one of the most
important occasions for a girl. Thus, learn to create
some individual DIY bridal jewelry can be a surefire
means to own an amazing and gorgeous day. In the
following paragraphs, you will learn how to make
string bracelets within several pure white threads.
Materials needed in DIY bridal jewelry:
Pure white Nylon Thread
20mm Linking ring
Pin
Scissors
How to make string bracelets?
Step1: attach cord strands onto rings by
Lark’s head knot and Double half hitch knot
1. Cut out 8 strands of 100cm long threads;
2. Pick one of the linking rings and attach each strand onto
it by using Lark’s head knot;
3. Hold another ring over the previous one, and then tie
the new 16 thread strands onto it by Double hitch knot.
Ensure each strand is tightened aptly.
An awesome project for DIY bridal jewelry out of white threads only; no matter make it for you own or give
as gift, learn this how to make string bracelets can be fit rightly.
Step2: pattern 1 for DIY bridal jewelry bracelet
In pattern 1, you just need to tie the Double half hitch knot.
1. As the picture show, separate the 16 strands into two parts and start to tie Double half hitch
towards the center with two outer ends. During this, regard the holding end on left side as one new
working end and change the positions of two holding ends;
2. Repeat the knot tying processes for another row.
Step3: pattern 2 for DIY bridal
jewelry bracelet
1. On both sides, take the 4 outer strands
and work a square knot. Regard the two
center strands as holding ends and rest
two as main working ends;
2. Borrow two adjacent strands and make
another square together with next two
strands, and so on. Work 3 same square
knots on each side. At end, knot an extra
one with 4 central strands;
3. Keep working the above processes for 4
rows of square knots;
4. Make another 2 rows of Double half
hitch knots.
Step4: pattern 3 for DIY bridal
jewelry bracelet
Divide the 16 strands into 4 groups. Work 6
square knots with 4 strands in each group. Next,
Work 2 rows of double half hitch knots on each
side again.
Step5: complete entire patterns for DIY bridal jewelry bracelet
Work the above three patterns for 3 times. After that, work the square knots in pattern 2 for the
rest part of bracelet;
When the bracelet reaches to an ideal length, work 4 rows of Double half hitch on each side as
ending;
To make a natural and secure ending, you may weave each strand through the backs of half hitch
knots. Repeat same action for all of ending tips. Glue done the threads and trim off all excess
portion.
Once neat the endings, you can wear and match it
with your wedding dress. The two rings closure
mechanism is awesome way to put on and take off it.
Love this DIY bridal jewelry bracelet? Or if you’re
probably a master on knot tying skills, you can try
mix more other knot patterns while practice this how
to make string bracelets project! Nice day!
Get divers of thread and cord please click:
http://www.pandahall.com/wholesale-Thread-Cord/54.html