diy arduino
TRANSCRIPT
ABOUT ME
• VP of Product at Emberlight • Former Founder/CEO at cisimple (ship.io) • Software guy who likes to hack on hardware things
WHY BUILD YOUR OWN ARDUINO?
• Prototyping • Learning about electronics • Will make you more attractive
WHAT DO YOU NEED TO GET STARTED?
MicrocontrollerATTiny • Up to 20MHz • 8KB Flash • 8 Pins
ATMega • Up to 20MHz • 32Kb Flash • 32 Pins
WHAT DO YOU NEED TO GET STARTED?
Other Components• Resistors • Capacitors • LEDs • Pin Headers • Solder
EXAMPLE
Parts• ATTiny 85 • 3 x Resistors • RGB LED • 2x3 Pin Header • Power Switch • Coin Cell Battery Holder
PROGRAMMING
Tiny AVR Programmer• Super easy to use • Well supported from Arduino IDE • Only about $20 on SparkFun
PROGRAMMING
Arduino as ISP• Just use your existing Arduino! • Well supported from Arduino IDE • Re-program a chip you’ve already
soldered to your PCB
RESOURCES
Parts • SparkFun • Adafruit
PCB Fabrication • OSH Park • Seeed Studio
Tutorials • SparkFun: Using Eagle
KEVIN ROHLING @kevinrohling
[email protected] http://www.slideshare.net/kevinrohling