DISCOVERY™ SERIESPOWER RACK AND HALF RACK

Discovery Series Power Rack & Half Rack FeaturesThe foundation of any facility, the Discovery™ Series DBR0610 Power Rack and DBR0611 Half Rack are the perfect tools for seasoned lifters and those new to strength training. The products’ enhanced functional capabilities allow for the use of bands, chains, torso trainers, battle ropes, suspension fitness training tools and more, along with traditional Power Rack and Half Rack exercises.

Frame

Gloss Metallic Silver Metallic Ash Gloss WhiteBlack Magic Gloss Desert Bronze

Standard Color Options

DBR0611 Half Rack• Dimensions (LxWxH): 71 x 61 x 98.5 in / 180 x 155 x 250 cm • Weight: 453 lb / 206 kg • Max. Lift Load Capacity: 600 lb / 272 kg • Max. Storage Weight: 2200 lb / 1000 kg • Storage: Ten (10) weight plate storage horns are 6.75 inches (17.2 cm)

effective length each; two (2) Olympic Bar storage receptacles; two (2) Accessory Hooks

• Number of Vertical Adjustment Positions: 14• Adjustment Increments: 4 in / 10.2 cm• Lowest Safety Rail Height: 28 in / 71.12 cm• Inside Width: 41.75 in / 106 cm

DBR0610 Power Rack• Dimensions (LxWxH): 83 x 63 x 98.5 in / 211 x 160 x 250 cm • Weight: 612 lb / 278 kg • Max. Lift Load Capacity: 800 lb /363 kg• Max. Storage Weight: 2200 lb / 1000 kg • Storage: Ten (10) weight plate storage horns are 6.75 inches (17.2 cm)

effective length each; two (2) Olympic Bar storage receptacles; two (2) Accessory Hooks

• Number of Vertical Adjustment Positions: 14 • Adjustment Increments: 4 in / 10.2 cm • Lowest Safety Rail Height: 19.88 in / 50 cm • Inside Width: 41.75 in / 106 cm

Discovery™ Series Power Rack & Half Rack

Discovery™ Series Power Rack & Half Rack Features

Weight Plate Storage

The ten weight storage horns are

6.75 inches (17.2 cm) long by 1.5

inches (3.8 cm) in diameter so they

don’t bind weight plates, making

them easier to add or remove. The

weight storage horns are situated at

accessible heights and are spaced to

accommodate all bumper-style plates

simultaneously.

Adjustable Safety Rails & Bar Catches

Adjustable safety rails and bar catches are standard on both Racks, increasing exerciser and operator confidence. The dual pin design of the bar catches and adjustable safety rails provides additional strength and stability, while also preventing the adjustable safety rails from rotating. Replaceable high impact polyurethane wear guards protect the Racks from metal on metal contact.

Anchor Points

Two anchor points are positioned high and four are positioned low on the Racks, with two additional anchor points included on the adjustable bar catches. All anchor points are rounded, which prevents excessive wear of bands and straps. Rounded gussets underneath the step-up platforms create unique anchor points for battle ropes.

Functional Storage

Integrated Olympic Bar and

functional apparatus storage is

conveniently positioned to enhance

accessibility. The two vertical Olympic

Bar receptacles feature a rubber

bumper to protect Olympic Bar

ends from metal on metal contact.

The two functional storage hooks

accommodate bands, chains and other

training accessories.

Discovery™ Series Power Rack & Half Rack Features

Step-Up Platform

Two step-up platforms are positioned

for easy access to the Chin-Up and

Pull-Up stations. The platforms are

dipped in a non-slip material and

angled so that an Olympic Bar placed

on it for front of rack exercises rolls

towards the upright for a more stable

storage position.

Dual Chin-Up and Pull-Up Handles

The Chin-Up / Pull-Up Handles can

be easily accessed via the integrated

step-up platform. Weight assisted

band hooks allow for numerous chin-

up and pull-up opportunities for a

wide range of exercisers.

Straight Chin-Up / Pull-Up Bar

A smooth, straight Pull-Up / Chin-Up

bar allows for kipping style pullups,

chin-ups and muscle-ups, and serves

as a convenient anchor point for

suspension fitness apparatuses.

Lifting Platforms 96 W x 72 D inch (243.8 x 182.9 cm) Olympic Lifting Platform with built in Rack insert. The platform is tongue and groove oak flooring with a six layer, custom water based polyurethane top coat. It features 3/4 inch (1.9 cm) high density rubber landing zones, 1/8 inch (.317 cm) steel frame, and a built in ramp with a black wrinkle powder coat finish. Lifting platforms are available in a thickness of 3” (7.6 cm). A custom logo op-tion is available for an additional cost.

DBROP1 Band Peg Kit (pair) Allows for the use of bands for extra resistance during benching or squatting exercises. Available on the Power Rack and Half Rack.

Discovery™ Series Power Rack & Half Rack Optional Accessories

DBROP5 • 3 Inch, 8 ft W x 6 ft D for Power Rack • 3 Inch, 8 ft W x 6 ft D for Power Rack

with Custom Logo

DBROP6• 3 Inch, 8 ft W x 6 ft D for Power Rack • 3 Inch, 8 ft W x 6 ft D for Half Rack

with Custom Logo

DBROP2 Combo Rack Connector KitsAllows for the back-to-back positioning of two Half Racks, two Power Racks or one Half Rack and one Power Rack.

Side-by-Side Connector KitAllows for the side-to-side positioning of two Power Racks or two Half Racks.

Half Rack / Half Rack Combo Kit Power Rack / Half Rack Combo Kit

Power Rack / Power Rack Combo Kit Half Rack Side-by-Side Connector Kit

Power Rack Side-by-Side Connector Kit

Discovery™ Series Power Rack & Half Rack Optional Accessories

DBROP10 • 6 ft long x 1.5 inch diameter (182.9 x 3.8 cm)

DBROP11 • 8 ft long x 2 inch diameter (243.8 x 5.1 cm)

DBROP9 Reverse Bar Catch (pair)Allows for lifts to be performed outside of the Power Rack.

DBROP4 Torso TrainerOptional torso trainer can be positioned on both/either front end of the Power Rack and Half Rack. Olympic Bar not included.

DBROP3 Dip StationEasy-to-adjust optional accessory that can be positioned on the front of the rack at various heights. Available on the Power Rack only.

© 2018 Precor Incorporated. Precor reserves the right to make any changes without prior notice. Last Revision: September 2018.

Learn more at: go.precor.com/dbr