discover the difference, unlike any other! - ilsintech.com auto stripper consumable discover the...
TRANSCRIPT
www.ilsintech.com
This product or document is protected by copyright and distributed under licenses restricting its use, copying and distribution.No part of this product or document may be reproduced in any form by any means without prior written authorization of ILSINTECH Co., Ltd.Products shown on this catalog are subject to change at any time without any prior notice for improvement purpose.
Copyright ⓒ 2017 ILSINTECH Co., Ltd. All rights reserved.
Fusion Splicers & Fiber Tools
Cleaver Auto Stripper Consumable
Discover the difference,Unlike any other!
Headquarter (KOREA)40-20, Techno 6-ro, Yuseong-gu, Daejeon, Korea (305 509)Tel. (+82) 42 671 5610 Fax. (+82) 42 671 5612 [email protected]
America Ilsintech LLC.4230 LBJ Freeway, Ste.149 Dallas, TX 75244, USATel. (+1) 972 556 0916 Fax. (+1) 972 910 8384 [email protected] / [email protected]
ILSINTECH(SHANGHAI) CO., LTD.Room 101 Li Ming Building, No111 Gui Qing Road Xuhui District, Shanghai, ChinaTel. 86-21-5836-0950 Fax. 86-21-5836-0951 [email protected]
Ilsintech Trading India PVT. LTD.Ilsintech Trading India Pvt.ltd 621, Devika Tower, Nehru Place New Delhi 110019, IndiaTel. (+91) 011 40555954, 40567229 [email protected]
Europe Branch (Czech)
Zirovnicka 2/2389 106 00 Prague 10, CzechTel. (+420) 725 001 757 [email protected]
OOO ILSINTECH RUS (Moscow)
Office 401(Kotra) 4F Hotel "Korston" 15 st. Kosygina Moscow, 119334, RussiaTel. (+7) 985 997 7185 [email protected] / [email protected]
Nigeria Branch (Lagos)
4 Oluse Ologolo Town, Lekki Beach Road Lekki Lagos State, NigeriaTel. 234-802-251-3046 [email protected]
Thailand Branch (Bangkok)
209/410 Bang Kruay -Sai Noi Rd., Bang Rak Pattana Bang Bua Thong Nonthaburi, Thailand 11110Tel. (+66) 84 156 0330 [email protected]
Vietnam Branch (Hochiminh)
313 Thoai Ngoc Hau st., Hiep Tan Ward Tan Phu Dist., HCMC VietnamTel. (+84) 91 818 8080 [email protected]
PT. ILSIN OTS INDONESIAJl. Sukapura Barat C03 Jakarta Utara 14140 West Java – INDONESIATel. 62-21-4090-0266, 62-818-882-666 [email protected]
1 ILSINTECH Co., Ltd.
Arc Fusion Splicer
17
3
5
7
9
11
13
15
Multi-Pack F
2Products Lineup
19Cleavers
21Stand-Alone Devices
Contents
22Accessories
K11
S5
KF4A
KF2A
KF4
KR7
R5
ILSINTECH Products Lineup 2
Conventional
Conventional
Conventional
: Integrated 5 function in one unit (stripping, cleaning, cleaving, splicing and sleeving)
Core Clad Ribbon
S5
K11
Active V- Groove
KF4
KF2A KR7
R5
Fixed V-Groove
: Integrated 7 function in one unit {stripping, cleaning, cleaving, splicing and sleeving + Optical power meter and V.F.L(Visual Fault Locator)}
KF4A
NEW PRODUCT
Core AlignmentActive V- Groove Alignment
ILSINTECH Arc Fusion Splicer K11 4
Specification
CATEGORY DESCRIPTION
Standard Package Option Package
Design, standard/optional package and specification shown above are subject to change with or without notice.
*
CATEGORY
MODEL
CATEGORY MODEL Q’ty
SWIFT K11
K11-4700
WDS060190
-
EI-23
Hard Case
CT-01
LD-3300
-
CF-02
PP
-
S312
-
1
1
1
1
1pair
1
1
1
1
1
1
1
2
-
Arc Fusion Splicer
Battery
AC Charger
Instructions for use
Spare electrode
Transporting Case
Cooling Tray
Wrench
USB Cable
Manual Stripper
Alcohol Dispenser
Tool Box
Sleeve Loader
USB F-mini 5pin Cable
3 ILSINTECH Arc Fusion Splicer K11
Core Alignment
Benefits and FeaturesLowest Splice Loss ever in the Industry
Wide 5.0-inch Color LCD Monitor with Touch Screen & Bidirectional Operation System
Optical Fiber Recognition Capability and LED Lamp in Heater
Powerful Lithium Polymer Battery with Large Capacity
IPAAS core to core alignment(Image pattern analysis alignment system)
0.25mm, 0.9mm, 2.0mm, 3.0mm, 4.0, Indoor cable
Single fiber
Cladding diameter: 80~150㎛, Coating diameter: 100㎛~4mm
7~16mm
Splice mode: 300, Heat mode: 100
SM: 0.02dB, MM: 0.01dB, DS: 0.04dB, NZDS: 0.04dB
> 60dB (Typical)
Typical 6sec. (Quick Mode)
9sec (IS-45 Sleeve, IS-45 mode), 13sec (IS-60 Sleeve, IS-60 mode)
40mm, 60mm, 32mm or 28mm for SOC
The last 10,000 results to be stored in the internal memory.(Image 10,000 results)
1.96N ~ 2.25N
143(W) x 163(L) x 140(H)mm (Without Bumper)
With battery 2.25kg
Two CMOS cameras and 5.0-inch color touch LCD
X/Y : 200X, Max 400X
DC Lithium polymer battery (DC 14.8V, 4700, 6000mAh-option), 100~240V AC Adapter
Typical 250 cycles / More than 350 cycles
More than 3,500 times
USB
Fiber alignment
Applicable type of fibers
Fiber count
Applicable fiber dimensions
Fiber setting and cleaved length
Splicing modes
Typical splice Loss
Return loss
Splicing time
Sleeve heating time
Applicable protection sleeve
Storage of splice result
Tension test
Dimension
Weight
Viewing method and display
Fiber view and magnification
Power supply
No. of splice cycles with battery
Electrode life
Terminals
K11-4700 / K11-6000
BI-07
EI-23
-
S-160(60mm), S-140(40mm)
SC-01
SC, LC, FC, ST(Refer to FTTx Solution catalogue)
HS-250, HS-900, HS-2.5, HS-IN,HS-SC/FC, HS-LC, HS-ST,LS-900
CI-03BT
DC 12V Available for car cigar jack
Battery
Cleaver Blade
Electrode
Work Belt
Sleeve
Sleeve Clamp
SOC Connector
Optical Fiber Holder
Cleaver
External Power
ILSINTECH Arc Fusion Splicer S5 6
Specification
Standard Package
CATEGORYFiber alignment
Fiber count
Fiber setting and cleaved length
Typical splice Loss
Splicing time
Sleeve heating time
Storage of splice result
Operating condition
Dimension
Viewing method and display
Power supply
Electrode life
Applicable type of fibers
Applicable fiber dimensions
Splicing modes
Return loss
Splice loss estimate
Applicable protection sleeve
Tension test
Storage condition
Weight
Fiber view and magnification
No. of splice cycles with battery
Terminals
IPAAS core to core alignment(Image pattern analysis alignment system)
Single fiber
250㎛: 8~16mm, 900㎛: 16mm(Application holder: 8mm)
SMF: 0.02dB, MMF: 0.01dB, DSF: 0.04dB, NZDSF: 0.04dB
Typical 9sec
30sec, 90sec(Connector)
The last 10,000 results to be stored in the internal memory.(Image 10,000 results)
Altitude: 5,000m above sea level, Temperature: -10℃~50℃, Humidity: 0~95%,
Wind: 15m/s, non-condensing, dust proof, water proof, shock proof
142(W) x 225(L) x 132(H)mm(Including rubber)
Two CMOS cameras and 4.3-inch color LCD monitor with touch screen
DC Lithium polymer battery(DC 14.8V, 8400mAh), 100~240V AC Adapter
More than 3,000 times
SM(ITU-T G.652), MM(ITU-T G.651), DS(ITU-T G.653), NZDS(ITU-T G.655)GI EDFA, EI980, Splicing available with different type fiber(SM/MM)
Cladding diameter: 80 ~ 150㎛, Coating diameter: 100 ~ 1000㎛
Splice mode: 100, Heat mode: 50
> 60dB
Available
40mm, 60mm (fiber), 28mm or 32mm(Connector)
2N / 4,4N(Option)
Temperature: -40℃~80℃, Humidity: 0~95%
2.5kg(Including battery 3.2kg)
X or Y view: 300X, X and Y view: 300X, 187X(Zoom 700X)
320cycle
USB, RCA, External Power(DC 12V Available for car cigar jack)
DESCRIPTION
CATEGORYArc Fusion Splicer
Sleeve Loader
Battery Pack
Tool Box
Carrying Case
AC Adapter
Spare Electrode
Cooling Tray
User Manual
S5
S312
S513
-
Hard Case
F1-1
EI-21
CT-03(60mm)
-
1
2
1
1
1
1
1 pair
1
1
MODEL Q’ty
Option Package
CATEGORYBattery Pack
Fiber Holder
Sleeving Clamp
External Power
Cleaver Blade
Electrode
Sleeve
SOC Connector
S513
HS-250, HS-900, HS-2.5,HS-IN,HS-SC, HS-LC, HS-ST, LS-900
SC-01
DC 12V Available for car cigar jack
BI-07
EI-21
S-160(60mm), S-140(40mm)
SC, LC, FC, ST(Refer to FTTx Solution catalogue)
MODEL
Design, standard/optional package and specification shown above are subject to change with or without notice.
*
5 ILSINTECH Arc Fusion Splicer S5
Stripping (No Cracks on Fiber) Cleaning Cleaving
: Integrated 5 function in one unit
Benefits and FeaturesIntegrated 5 Function in One Unit(Thermal stripper without crack on fiber, alcohol dispenser, built-in automatic cleaver, splicer and sleeve heater)
4.3-inch Color LCD Monitor with Touch Screen & Bidirectional Operation System
Powerful Lithium Polymer Battery with Large Capacity
Built-in Dual Sleeve Heater
IPAAS Technology based Core Alignment
Compatible with SWIFT Fusion Splice-On Connector(FSOC) full compliance to industry standard, allowing convenient field termination and assembly with minimum loss rate and maximum tensile force once assembled.
Core Alignment
ILSINTECH Arc Fusion Splicer KF4A 8
: Integrated 5 function in one unitKF4A+ : Including OPM,V.F.L(Optical module)
7 ILSINTECH Arc Fusion Splicer KF4A
Benefits and Features
Active V-Groove Alignment : Clad to clad with maximum accuracy in alignment.
Integrated 5 Function in One Unit
(Thermal stripper without crack on fiber, alcohol dispenser, built-in automatic cleaver, splicer and sleeve heater)
Compatible with SWIFT Fusion Splice-On Connector(FSOC) full compliance to industry standard,
allowing convenient field termination and assembly with minimum loss rate and maximum tensile
force once assembled.
Active V-Goove Alignment
Design, standard/optional package and specification shown above are subject to change with or without notice.
*
Stripping(No Cracks on Fiber) Cleaving SOC/Pigtail On a Telephone poleCleaning
Specification
Standard Package Option Package
CATEGORY DESCRIPTIONIPAAS Clad to Clad Alignment
0.25mm, 0.9mm, 2.0mm, 3.0mm Indoor cable
Single fiber
Cladding diameter : 125㎛, Coating diameter : 150㎛~3mm
5mm to 16mm
Splice mode: 300, Heat mode: 100
SM: 0.02dB, MM: 0.01dB, DS:0.04dB, NZDS: 0.04dB
> 60dB
Typical 7sec with SM
Available
Typical 13sec with IS-60 mode, IS-60 sleeve
60mm, 40mm and micro sleeves
Data : 5,000ea Up to, Image : 5,000ea Up to
1.96N to 2.25N
Temperature: -40℃~80℃, Humidity: 0~95%
132(W) x 212(L) x 73(H)mm (Without rubber protector)
1.5kg(Including battery)
2 AXIS Two CMOS cameras with 4.3-inch color LCD monitor
X/Y : 110X , Max :220X
Li-ion Battery(DC 14.8V, 3400mAh), 100 ~ 240V AC Charger
Typical 200 cycles
3,000 splices
USB
Fiber alignment
Applicable type of fibers
Fiber count
Applicable fiber dimensions
Fiber setting and cleaved length
Splicing modes
Typical splice Loss
Return loss
Splicing time
Splice loss estimate
Sleeve heating time
Applicable protection sleeve
Storage of splice result
Tension test
Storage condition
Dimension
Weight
Viewing method and display
Fiber view and magnification
Power supply
No. of splice cycles with battery
Electrode life
Terminals
Operating condition Altitude: 0~5,000m above sea level, Temperature: -10℃~50℃, Humidity: 0~95%,Wind: 15m/s, non-condensing, dust proof, water proof, shock proof
CATEGORY MODEL Q’tySWIFT KF4A
KF-3400
FY1701000
-
EI-24
HC-11(Hard Case)
-
CT-01(40mm)
LD-3300
-
1
1
1
1
1pair
1
1pair
1
1
1
Arc Fusion Splicer
Battery
Battery Adapter
Instructions for use
Spare electrode
Transporting Case
Optical fiber holder
Cooling Tray
Wrench
USB Cable
CATEGORY MODELKF-3400
BI-07
EI-24
ILST-SS03(L)(Soft Case)
WB-01
S09-C, S09, S30-C, S30
SC-01
SC, LC, FC, ST(Refer to FTTx Solution catalogue)
CF-02
DC 12V Available for car cigar jack
HS-250, HS-900, HS-2.5, HS-IN,HF4-SC/FC,HF4-ST, HF4-LC, LS-900(choose one)
Battery
Cleaver Blade
Electrode
Transporting Case
Work Belt
Sleeve
Sleeve clamp
SOC connector
Manual Stripper
External Power
Optical fiber holder
Up to 75,000Blade life
Up to 21,000 Electrode life
Optical Power Module (Optical power meter + VFL)
ILSINTECH Arc Fusion Splicer KF2A 10 9 ILSINTECH Arc Fusion Splicer KF2A
Benefits and Features
Fixed V-Groove Alignment : Clad to clad with maximum accuracy in alignment.
Integrated 5 Function in One Unit
(Thermal stripper without crack on fiber, alcohol dispenser, built-in automatic cleaver, splicer and sleeve heater)
Compatible with SWIFT Fusion Splice-On Connector(FSOC) full compliance to industry standard,
allowing convenient field termination and assembly with minimum loss rate and maximum tensile
force once assembled.
Fixed V-Goove Alignment
OptimizedFTTH Fusion Splicer
Stripping(No Cracks on Fiber) Cleaving SOC/Pigtail On a Telephone poleCleaning
Specification
Standard Package Option Package
Design, standard/optional package and specification shown above are subject to change with or without notice.
*
CATEGORY DESCRIPTIONFixed V-Groove (Clad to Clad Alignment)
0.25mm, 0.9mm, 2.0mm, 3.0mm Indoor cable
Single fiber
Cladding diameter : 125㎛, Coating diameter : 250, 900㎛
5mm to 16mm
Total Splice mode: 40, Heat mode: 20
SM: 0.04dB, MM: 0.02dB, DS:0.06dB, NZDS: 0.06dB
> 60dB
Typical 7sec with SM
Available
Typical 30sec
60mm, 40mm and micro sleeves
Data : 2,000ea Up to, Image : 2,000ea Up to
1.96N
Temperature: -40℃~80℃, Humidity: 0~95%
133(W) x 212(L) x 70(H)mm (Without rubber protector)
1.35kg(Including battery)
Two CMOS cameras and 3.5-inch color LCD monitor
X/Y : 200X
Li-ion Battery(DC 14.8V, 3400mAh), 100 ~ 240V AC Charger
Typical 200 cycles
3,000 splices
Up to 75,000
USB
Fiber alignment
Applicable type of fibers
Fiber count
Applicable fiber dimensions
Fiber setting and cleaved length
Splicing modes
Typical splice Loss
Return loss
Splicing time
Splice loss estimate
Sleeve heating time
Applicable protection sleeve
Storage of splice result
Tension test
Storage condition
Dimension
Weight
Viewing method and display
Fiber view and magnification
Power supply
No. of splice cycles with battery
Electrode life
Blade life
Terminals
Operating condition Altitude: 0~5,000m above sea level, Temperature: -10℃~50℃, Humidity: 0~95%,Wind: 15m/s, non-condensing, dust proof, water proof, shock proof
CATEGORY MODEL Q’tySWIFT KF2A
KF-3400
-
-
EI-19
ILST-SS03(L)(Soft Case)
-
CT-01(40mm)
LD-3300
-
1
1
1
1
1pair
1
1pair
1
1
1
Arc Fusion Splicer
Battery
AC Charger
Instructions for use
Spare electrode
Transporting Case
Optical fiber holder
Cooling Tray
Wrench
USB Cable
CATEGORY MODELKF-3400
BI-07
EI-19
Hard Case
WB-01
S09-C, S09, S30-C, S30
SC-01
SC, LC, FC, ST(Refer to FTTx Solution catalogue)
CF-02
DC 12V Available for car cigar jack
KF-250, KF-900, KF-2.5, KF-IN,KF-SC/FC, KF-LC, KF-ST, KF-L900
(Choose one)
Battery
Cleaver Blade
Electrode
Transporting Case
Work Belt
Sleeve
Sleeve clamp
SOC connector
Manual Stripper
External Power
Optical fiber holder
ILSINTECH Arc Fusion Splicer KF4 12
Specification
Standard Package Option Package
11 ILSINTECH Arc Fusion Splicer KF4
Active V-Goove Alignment
Work BeltOptional
Design, standard/optional package and specification shown above are subject to change with or without notice.
*
·Active V-Groove Alignment / Metro, Access Network and FTTH &
Universal Fiber Holders
·World’s Most Compact Active V-Groove Fusion Splicer
·The best quality, budget priced - Make your every penny count!
Versatility MAXIMUM Economy OPTIMUMSize & Weight MINIMUM
Benefits and Features
CATEGORY DESCRIPTIONIPAAS, Active V-Groove Alignment
0.25mm, 0.9mm, 2.0mm, 3.0mm Indoor cable
Single fiber
Cladding diameter : 125㎛, Coating diameter : 150㎛~3mm
5mm to 16mm
Splice mode: 300, Heat mode: 100
SM: 0.02dB, MM: 0.01dB, DS:0.04dB, NZDS: 0.04dB
> 60dB
Typical 7sec with SM
Available
Typical 13sec with IS-60 mode, IS-60 sleeve
60mm, 40mm and micro sleeves
Data : 5,000ea Up to, Image : 5,000ea Up to
1.96N to 2.25N
Temperature: -40℃~80℃, Humidity: 0~95%
124(W) x 189(L) x 75(H)mm (Without rubber protector)
1.1kg(Including battery)
2 AXIS Two CMOS cameras with 4.3-inch color LCD monitor
X/Y : 130X , Max :260X
Li-ion Battery(DC 14.8V, 3400mAh), 100 ~ 240V AC Charger
Typical 200 cycles
3,000 splices
Up to 75,000
USB
Fiber alignment
Applicable type of fibers
Fiber count
Applicable fiber dimensions
Fiber setting and cleaved length
Splicing modes
Typical splice Loss
Return loss
Splicing time
Splice loss estimate
Sleeve heating time
Applicable protection sleeve
Storage of splice result
Tension test
Storage condition
Dimension
Weight
Viewing method and display
Fiber view and magnification
Power supply
No. of splice cycles with battery
Electrode life
Blade life
Terminals
Operating condition Altitude: 0~5,000m above sea level, Temperature: -10℃~50℃, Humidity: 0~95%,Wind: 15m/s, non-condensing, dust proof, water proof, shock proof
CATEGORY MODEL Q’tySWIFT KF4
KF-3400
FY1701000
-
EI-24
ILST-SS03(L)(Soft Case)
CT-01(40mm)
LD-3300
-
CS-01BT
CF-02
PP
1
1
1
1
1pair
1
1
1
1
1
1
1
Arc Fusion Splicer
Battery
Battery Adapter
Instructions for use
Spare electrode
Transporting Case
Cooling Tray
Wrench
USB Cable
Cleaver
Manual Stripper
Alcohol Dispenser
CATEGORY MODELKF-3400
BI-07
EI-24
HC-11(Hard Case)
WB-01
WK-02
S09-C, S09, S30-C, S30
SC-01
SC, LC, FC, ST(Refer to FTTx Solution catalogue)
POM
DC 12V Available for car cigar jack
HS-250, HS-900, HS-2.5, HS-IN,HF4-SC/FC,HF4-ST, HF4-LC, LS-900 (choose one)
Battery
Cleaver Blade
Electrode
Transporting Case
Work Belt
Work Table
Sleeve
Sleeve clamp
SOC connector
Alchol Dispenser
External Power
Optical fiber holder
Up to 21,000 Electrode life
ILSINTECH Arc Fusion Splicer KR7 14
Specification
Standard Package
CATEGORYFiber alignment
Applicable fiber dimensions
Typical splice Loss
Splicing time
Sleeve heating time
Storage of splice result
Operating condition
Dimension
Viewing method and display
Power supply
Electrode life
Splicing modes
Return loss
Splice loss estimate
Applicable protection sleeve
Tension test
Storage condition
Weight
Fiber view and magnification
No. of splice cycles with battery
Terminals
Fixed V-Groove(Clad to Clad)
Applicable type of fibers SM(ITU-T G.652), MM(ITU-T G.651), DS(ITU-T G.653), NZDS(ITU-T G.655)
Single: Cladding diameter 125㎛, Coating diameter 250, 900㎛Ribbon: Cladding diameter 125㎛, Ribbon fiber thickness 0.25 to 0.40mm
10mm
SM: 0.05dB, MM: 0.02dB, DS: 0.08dB, NZDS: 0.08dB
Typical 16sec with standard SM(ITU-T G.652)
1~2 core 20sec, 4~12 core 50sec
The last 10,000 results to be stored in the internal memory.(Image 10,000 results)
Altitude: 5,000m above sea level, Temperature: -10℃~50℃,Humidity: 0~95%,Wind: 15m/s, non-condensing, dust proof, water proof, shock proof
142(W) x 163(L) x 146(H)mm(Including rubber)
Two CMOS cameras and 4.3-inch color LCD monitor with touch screen
DC Lithium polymer battery(DC 14.8V, 6000mAh), 100~240V AC Adapter
More than 1,500 times
Single fiber, 2~12 fiber
Splice mode: 100, Heat mode: 100
> 60dB
Available
40mm, 60mm(fiber), Micro
2N
Temperature: -40℃~80℃, Humidity: 0~95%
2.0kg(Including battery 2.5kg)
20X, MAX 55X
200cycle
USB, External power(DC 12V Available for car cigar jack), DC-output t
DESCRIPTION
Option Package
CATEGORYBattery Pack
Cleaver Blade
Electrode
Sleeve
External Power
Fiber Holder
Sleeving Clamp
K713
Fiber Cleaver -
BI-07
EI-22
R-F40(40mm)
DC 12V Available for car cigar jack
H7-12,H7-10,H7-8,H7-6, H7-4, H7-2,H7-250, H7-900, H7-IN, H7-2.5
MPO-10,KR7-12
SC-01
MODELCATEGORYArc Fusion Splicer
Sleeve Loader
Battery Pack
Holder
Cleaver
Tool Box
AC Adapter
Spare Electrode
Cooling Tray
Manual Stripper (DC)
KR7
S312
K713
H7-Series
CI-03RT
-
S311
EI-22
CT-03(60mm)
IHS-12
1
2
1
1 pair
1
1
User Manual - 1
Carrying Case Hard Case 1
1
1 pair
Alcohol Dispenser 1
1
1
DC-Output Cable - 1
MODEL Q’ty
Fiber setting and cleaved length
Fiber count
Thermal Manual StripperDust Water Shock
13 ILSINTECH Arc Fusion Splicer KR7
Benefits and FeaturesPowerful Lithium Polymer Battery with Large Capacity
4.3-inch Color LCD Monitor with Touch Screen & Bidirectional Operation System
User-friendly GUI
Portable thermal manual stripper, NO CRACKS ON ribbon fibers : IHS-12
Built-in Dual Sleeve Heater
Equipped with Sleeve Loader to easy fiber loading for ribbon fiber
Ribbon to Ribbon
Design, standard/optional package and specification shown above are subject to change with or without notice.
*
CI-03RT
IHS-12
RibbonizingHolder Kit
MPO HolderRibbonizing Holder
Specification
Standard Package
CATEGORYFiber alignment
Applicable fiber dimensions
Typical splice Loss
Splicing time
Sleeve heating time
Storage of splice result
Operating condition
Dimension
Viewing method and display
Power supply
Electrode life
Splicing modes
Return loss
Splice loss estimate
Applicable protection sleeve
Tension test
Storage condition
Weight
Fiber view and magnification
No. of splice cycles with battery
Terminals
Fixed V-Groove(Clad to Clad)
Applicable type of fibers SM(ITU-T G.652), MM(ITU-T G.651), DS(ITU-T G.653), NZDS(ITU-T G.655),ITU-T(G.657)
Single: Cladding diameter 125㎛, Coating diameter 250, 900㎛Ribbon: Cladding diameter 125㎛, Ribbon fiber thickness 0.27 to 0.32mm
8mm
SM: 0.05dB, MM: 0.02dB, DS: 0.08dB, NZDS: 0.08dB
Typical 20sec with standard SM(ITU-T G.652)
30sec, 50sec
The last 10,000 results to be stored in the internal memory.(Image 10,000 results)
Altitude: 5,000m above sea level, Temperature: -10℃~50℃,Humidity: 0~95%,Wind: 15m/s, non-condensing, dust proof, water proof, shock proof
142(W) x 225(L) x 132(H)mm(Including rubber)
Two CMOS cameras and 4.3-inch color LCD monitor with touch screen
DC Lithium polymer battery(DC 14.8V, 8400mAh), 100~240V AC Adapter
More than 1,000 times
Single fiber, 2~12 fiber
Splice mode: 100, Heat mode: 50
> 60dB
Available
40, 60mm(fiber)
2N / 4,4N(Option)
Temperature: -40℃~80℃, Humidity: 0~95%
2.5kg(Including battery 3.2kg)
50X
320cycle
USB, External power(DC 12V Available for car cigar jack)
DESCRIPTION
Fiber count
Fiber setting and cleaved length
CATEGORYArc Fusion Splicer
Sleeve Loader
Battery Pack
Holder
User Manual
AC Adapter
Spare Electrode
Cooling Tray
Tool Box
Carrying Case
R5
S312
S513
H5-Series
-
F1-1
EI-22
CT-01(60mm)
-
Hard Case
1
2
1
1 pair
1
1
1 pair
1
1
1
MODEL Q’ty
Option Package
CATEGORYBattery Pack
Fiber Holder
Sleeving Clamp
Cleaver Blade
Electrode
Sleeve
External Power
S513
H5-12, H5-10, H5-8, H5-6, H5-4,H5-2, H5-250, H5-900, H5-IN, H5-2.5
MPO-10,KR7-12
SC-01
BI-07
EI-22
R-F40(40mm)
DC 12V Available for car cigar jack
MODEL
ILSINTECH Arc Fusion Splicer R5 16 15 ILSINTECH Arc Fusion Splicer R5
Stripping (No Cracks on Fiber) Cleaning Cleaving
Benefits and Features
Ribbon to Ribbon
: Integrated 5 function in one unit
Integrated 5 Function in One Unit(Thermal stripper without crack on fiber, alcohol dispenser, built-in automatic cleaver, splicer and sleeve heater)
4.3-inch Color LCD Monitor with Touch Screen & Bidirectional Operation System
Resistant to Shock, Dust and Water
Powerful Lithium Polymer Battery with Large Capacity
Built-in Dual Sleeve Heater
Equipped with Sleeve Loader easy fiber loading for ribbon fiber
Design, standard/optional package and specification shown above are subject to change with or without notice.
*
RibbonizingHolder Kit MPO HolderRibbonizing Holder
Design, standard/optional package and specification shown above are subject to change with or without notice.
*
ILSINTECH Multi-pack F 18
Specification
CATEGORY
Fiber Diameter
Motor Lifetime
Tensile Strength Test
Heating Temperature
Method
Cleaning Liquid
Cleaving Length
Time
Fiber Type
Dimension
Stripped length
Blade Lifetime
Fiber Type
Heating Time
Cleaning Spec.
Blade Lifetime
Temperature
Sleeve Length
Weight
0.25 ~ 0.9mm
1,000,000
More than 3Kgf
60 ~ 150℃
Air-pump
Alcohol
8mm
10 ~ 150sec
250, 900, 2 ~ 4 Connector 4Type(SC, FC, LC, ST)
145x137x98mm
27mm
More than 100,000
Single Fiber
0.1 ~ 1.5sec
13ml / 100 times
50,000
130 ~ 200℃
60mm
1.2kg
DESCRIPTIONStripping
Cleaning
Cleaving
Sleeve Heating
Using Spec.
CATEGORYLaser source
Fiber compatibility
Operating temperature
Relative humidity
Laser wavelengths(nm)
Output port
Modulation
Storage temperature
Class 2 laser diode
SM and MM
-10℃ to 40℃
0% to 85% non-condensing
650nm ± 20nm
Output power <1mW into single mode fiber
Universal adapter for connectorswith 2.5mm ferrules
CW or 2~3Hz selected
-40℃ to 70℃
DESCRIPTION
Distance range >4km
Specification (Fault Locator)Specification (Power Meter)
CATEGORYPower range (1)
Calibrated wavelengths b
Tone detecting range
Optical adapter type
Measurable wavelengths (2)
Power uncertainty c
Tone detection
Display unit
5 to -50 dBm
1310, 1550 nm
5 to -30 dB
Standard: 2.5mm Universal adapterOptional: 1.25mm Universal adapter
Operating temperature -10℃ to 50℃
Storage temperature -40℃ to 70℃
Relative humidity 0% to 85% non-condensing
1310, 1490, 1550 nm
±5% ±5nW dB
270, 300, 1k, 2k Hz
dB/dBm/W
DESCRIPTION
Resolution d 0.01 dB
a. All specification valid at 1550nm without (1), (2) factors and 23℃±1℃ with an 2.5mm universal adapter for PC connector.
b. In CW mode c. From -5dB to -50dBm d. From +5dBm to -40dBm (From -40dBm to -50dBm: 0,1dB resolution
17 ILSINTECH Multi-pack F
: Integrated 6 function in one unit
{stripping, cleaning, cleaving and sleeving + Optical power meter and V.F.L(Visual Fault Locator)}
Stripping (No Cracks on Fiber) Cleaning Cleaving
Benefits and FeaturesIntegrated 6 Function in One Unit
Built-in Power Meter and Fault Locator (PCT/KR2013/001243)
Compatible with Fusion Splice-On Connector(FSOC) in accordance with the Industrial Standard
The Integrated FTTH Installation Tool
Swift Multi-Pack F is designed to assemble FTTH Fusion FSOCwith any splicers available in the market. 4 functions, stripping, cleaning, cleaving and sleeving,
are in this single unit. This Swift Multi-Pack F satisfies users’ needs with its efficient and productive design.Remember, this unit can be used for other company’s splicers.
Furthermore,users can enjoy two more functions from the Optical Power Meter &Visual Fault Locator in this unit; they easily check the result of splicing in real time. (ALLINONE+)
19 ILSINTECH Fiber Cleavers ILSINTECH Fiber Cleavers 20
CATEGORYBare Fiber Diameter
Cleave Angle
Blade Life time
Weight
Applicable Splicer
Coating Diameter
Cleave Length
Dimensions
CATEGORYBare Fiber Diameter
Cleave Angle
Blade Life time
Weight
Applicable Splicer
Coating Diameter
Cleave Length
Dimensions
125㎛
0.5°
50,000
244g
K9, K11
250 ~ 900㎛
Single 10mm ~ 16mm
58×58×50mm
CI-01
Single 10mm ~ 16mm
125㎛
0.5°
50,000
244g
KF4
250 ~ 900㎛, IN-DOOR
58×58×50mm
CS-01A
CI-01 CS-01A
CATEGORYCleave Angle
Dimension
Cleave Life
Weight
0.5°
19×32×124mm
2,000
70g
CI-06
CI-06 CI-08- Typical Cleaving Angle Deviation: 6° ~ 9°- Just one touch for tension, twisting, cleaving- Oil Damper System
CATEGORYBare Fiber Diameter
Cleave Angle
Dimension
Coating Diameter
Blade Life time
Weight
125㎛
6°~ 9°
104×72×56mm
250 ~ 900㎛
Max. 30,000
400g
Cl-08
- Economical Price- Compact Design
Fiber Cleavers
CS-01AT
CS-01ATCATEGORYBare Fiber Diameter
Cleave Angle
Blade Life time
Weight
Applicable Splicer
Chip-Box
Coating Diameter
CleaveLengths
Universal Holder
Exchange Holder
Dimensions
125㎛
0.5°
75,000
244g
X
Single 7.5mm Single 10mm
X
OO O
250 ~ 900㎛, IN-DOOR
Single 7mm ~ 16mm(SOC)
Single 7.5mm Ribbon 10mm
58×58×50mm
K11, K9K11, K9, KF4
125㎛
0.5°
75,000
276g
K11, K9, KF4
250 ~ 900㎛, IN-DOOR
Single 7mm ~ 16mm(SOC)
90×58×50mm
125㎛
0.5°
75,000
276g
250 ~ 900㎛
Single 10mm ~ 16mm
90×58×50mm
CI-03BTCS-01BT125㎛
0.7°
75,000
260g
KR7
250 ~ 900㎛
90×58×50mm
CI-03RT
- Single Action(Full Automatic) for changing channel, cleaving & collecting fiber chips- Blade Life time 75,000 (No setup is required when replacing blade) - Oil Damper System
CS-01BT
CI-03RT
Auto Rotation Blade Cleavers
CI-03BT
- High Quality- High Productivity- More Convenience
Auto Stripper
CATEGORYApplicable
Stripped length
Time Setting Step
Dimension
Fiber Counts
Heating temp.
Heating Time
Power
250 ~ 900㎛
30mm
5 Steps
154x64x76mm
Weight 750g
Single to 12ct
60℃ ~ 140℃
1 ~ 4.5sec
DC 12V
DESCRIPTION
Temp. Setting Step 9 Steps
- No Fiber Crack & Keep High Tensile Strength- Chemical Strip Draw-backs Resolved
Window Stripper
CATEGORYStripped length
Fiber Coating Material
Weight
Applicable cable diameter
Stripping time
Dimension
2 ~ 60mm2 ~ 120mm
UV Coated Fiber
800g
250㎛
20mm / sec
190x64x76mm
DESCRIPTION
Power DC 12V
21 ILSINTECH Stand-Alone Devices
- V-groove fiber alignment tool
ILSINTECH Accessories 22
Electrodes - Long-last lifespan, superior and stable performance- Compatible with various fusion splicers
Applicable fibers
Fiber count
Thickness of the fiber ribbon
Coating material
Coating / Cladding diameter
1 to 12 fibers
250 to 400 um
UV cured resin
250 / 125 um
Specifications
Stripping length
Power supply
Heating time
Dimensions
Max. 38 mm
14.8 V DC from Ilsintech “KR7” with DC power
Weight 245 g
Approx. 5 sec. at normal mode
127.3 W × 44D × 29H mm
VGI series
Cleaver Blades- Maximum durability, superior cleaving quality- Compatible with other cleavers
Ribbon Stripper- Designed to strip the coating of fiber ribbon up to 12’fibers.
Fiber Holders- Variable fiber Holders for single, ribbon fiber, SOC and etc.- Compatible with fusion splicer, cleaver, multipack and etc.
Ribbon Separator - Compact ribbon fiber separator
Ribbonizing Holder Kit- A holder can have a termination after Ribbonizing fibers directly on the holder.- By Shortening the separate Ribonize tool process.- completed work with fast fiber clustering time(Average 5~6 minutes)
IHS-12
MPO HolderRibbonizing Holder