dipl.-ing. peter binde pdm integration of fea design processes -iman and designspace – cadfem...
TRANSCRIPT
![Page 1: Dipl.-Ing. Peter Binde PDM Integration of FEA Design processes -iMAN and DesignSpace – CADFEM Usermeeting 2002 Peter Binde](https://reader030.vdocuments.us/reader030/viewer/2022032612/56649f075503460f94c1ca71/html5/thumbnails/1.jpg)
Dipl.-Ing. Peter Binde
PDM Integration of FEA Design processes
-iMAN and DesignSpace –
CADFEM Usermeeting 2002
Peter Binde
![Page 2: Dipl.-Ing. Peter Binde PDM Integration of FEA Design processes -iMAN and DesignSpace – CADFEM Usermeeting 2002 Peter Binde](https://reader030.vdocuments.us/reader030/viewer/2022032612/56649f075503460f94c1ca71/html5/thumbnails/2.jpg)
Dipl.-Ing. Peter Binde
Content
- Dr. Wallner Group
- iMAN, DesignSpace and Unigraphics
- Why Integrating FEA in PDM
- Requirements for the Integration
- UG Concept of Master Model
- Variants for DesignSpace iMAN Data model
- How to Implement
- How it looks like
![Page 3: Dipl.-Ing. Peter Binde PDM Integration of FEA Design processes -iMAN and DesignSpace – CADFEM Usermeeting 2002 Peter Binde](https://reader030.vdocuments.us/reader030/viewer/2022032612/56649f075503460f94c1ca71/html5/thumbnails/3.jpg)
Dipl.-Ing. Peter Binde
Dr. Wallner Group
Consulting and Servicearound CAD, CAE, PDM
Competences:
- Process-analyses and -syntheses- Trainings and workshops- User-support and hotline- FEA / MKS analysis and
design- Integration-solutions and
software-development
![Page 4: Dipl.-Ing. Peter Binde PDM Integration of FEA Design processes -iMAN and DesignSpace – CADFEM Usermeeting 2002 Peter Binde](https://reader030.vdocuments.us/reader030/viewer/2022032612/56649f075503460f94c1ca71/html5/thumbnails/4.jpg)
Dipl.-Ing. Peter Binde
Dr. Wallner Group
30 Persons, 10 Years ExperienceFocus on Unigraphics, iMAN
Locations: Bremen
Wiesbaden
Stuttgart
München
![Page 5: Dipl.-Ing. Peter Binde PDM Integration of FEA Design processes -iMAN and DesignSpace – CADFEM Usermeeting 2002 Peter Binde](https://reader030.vdocuments.us/reader030/viewer/2022032612/56649f075503460f94c1ca71/html5/thumbnails/5.jpg)
Dipl.-Ing. Peter Binde
iMAN, DesignSpace and Unigraphics
Present Situation:- More and more FEA becomes
the designers daily work- PDM is established for CAD Applications- iMAN/Unigraphics products and
DesignSpace are from different companies, ... Questions:
- Integration?- Will there be an interface?- Will it be supported?
This Article:- Shows a way to encapsulate DesignSpace in iMAN.- Demonstrates processes for CAD/FEM integrated in PDM
![Page 6: Dipl.-Ing. Peter Binde PDM Integration of FEA Design processes -iMAN and DesignSpace – CADFEM Usermeeting 2002 Peter Binde](https://reader030.vdocuments.us/reader030/viewer/2022032612/56649f075503460f94c1ca71/html5/thumbnails/6.jpg)
Dipl.-Ing. Peter Binde
Why Integrating FEA in PDM
Improve Communication and Data-Retrieval:- Better security of data- Better data exchange- Data-retrieval from different users, departments, locations- Restrictions possible- Data is always up to date- Integration / Comparison of FEA and prototype-testing
Improve Documentation:- Documentation of A-B changes- Easier selection of „Carry-Over“ parts- Documentation for quality-insurance needs
![Page 7: Dipl.-Ing. Peter Binde PDM Integration of FEA Design processes -iMAN and DesignSpace – CADFEM Usermeeting 2002 Peter Binde](https://reader030.vdocuments.us/reader030/viewer/2022032612/56649f075503460f94c1ca71/html5/thumbnails/7.jpg)
Dipl.-Ing. Peter Binde
Why Integrating FEA in PDM
Use of digital Workflow Support:- Prove, release, change processes
Reusage of FE Data:- Use of FE-data for knowledge reuse- Digital-Mock-Up using FE-data: Reusing meshes
or the stiffness of piece parts in FEA or MKS for assemblies.
![Page 8: Dipl.-Ing. Peter Binde PDM Integration of FEA Design processes -iMAN and DesignSpace – CADFEM Usermeeting 2002 Peter Binde](https://reader030.vdocuments.us/reader030/viewer/2022032612/56649f075503460f94c1ca71/html5/thumbnails/8.jpg)
Dipl.-Ing. Peter Binde
Requirements for the Integration
Keep DesignSpace / UG native possibilities:- Associativity to CAD geometry, parameter-transfer- Transfer of attributes from CAD to FEM (Ex. Shell thickness)- Transfer of weld point-info from CAD to FEM- Keep normal usage (starting DesignSpace from UG)
Integrate Geometry Preparation:- Provide all CAD methods to prepare the geometry- Do not change the original part
![Page 9: Dipl.-Ing. Peter Binde PDM Integration of FEA Design processes -iMAN and DesignSpace – CADFEM Usermeeting 2002 Peter Binde](https://reader030.vdocuments.us/reader030/viewer/2022032612/56649f075503460f94c1ca71/html5/thumbnails/9.jpg)
Dipl.-Ing. Peter Binde
Requirements for the Integration
Other Requirements:- Provide overriding of CAD geometry-parameters
(For optimisation of different parameters)- Organize the DesignSpace report- Provide export and import of all related data from the
database
![Page 10: Dipl.-Ing. Peter Binde PDM Integration of FEA Design processes -iMAN and DesignSpace – CADFEM Usermeeting 2002 Peter Binde](https://reader030.vdocuments.us/reader030/viewer/2022032612/56649f075503460f94c1ca71/html5/thumbnails/10.jpg)
Dipl.-Ing. Peter Binde
UG Concept of Master Model
Data Structure Outside Database (Native):
Drawing Kinematics ...Strength
Assembly
Component
Strength
Component
Drawing CAM...
Operating-System File
![Page 11: Dipl.-Ing. Peter Binde PDM Integration of FEA Design processes -iMAN and DesignSpace – CADFEM Usermeeting 2002 Peter Binde](https://reader030.vdocuments.us/reader030/viewer/2022032612/56649f075503460f94c1ca71/html5/thumbnails/11.jpg)
Dipl.-Ing. Peter Binde
UG Concept of Master Model
Data Structure in iMAN Database:
Drawing
Assembly
Kinematics ...Strength
Strength
ComponentComponent
Drawing CAM...
Dataset Object, includes Attributes and several Files:
iMAN Dataset
References:
Attributes, Methods
UG (.prt)
Ansys(.db)
Word-Doc (.doc)
... (*.*)
![Page 12: Dipl.-Ing. Peter Binde PDM Integration of FEA Design processes -iMAN and DesignSpace – CADFEM Usermeeting 2002 Peter Binde](https://reader030.vdocuments.us/reader030/viewer/2022032612/56649f075503460f94c1ca71/html5/thumbnails/12.jpg)
Dipl.-Ing. Peter Binde
Variants for DesignSpace iMAN Data model
UG (.prt)
DesignSpace (.dsdb)
iMAN Dataset
References
AttributesMethods
iMAN Dataset
References
AttributesMethods
B: Separate Dataset for DesignSpace Clearness ( + ) Geometry-Prep.: ( - )
iMAN DatasetUG (.prt)
DesignSpace (.dsdb)
References
Attributes Methods
A: One Dataset for all Files Clearness ( - )Geometry-Prep.: ( - )
![Page 13: Dipl.-Ing. Peter Binde PDM Integration of FEA Design processes -iMAN and DesignSpace – CADFEM Usermeeting 2002 Peter Binde](https://reader030.vdocuments.us/reader030/viewer/2022032612/56649f075503460f94c1ca71/html5/thumbnails/13.jpg)
Dipl.-Ing. Peter Binde
Variants for DesignSpace iMAN Data model
UG (.prt)
UG (.prt)
DesignSpace (.dsdb)
iMAN Dataset
References
AttributesMethods
iMAN Dataset
References
AttributesMethods
iMAN Dataset
References
AttributesMethods
UG (.prt) UG
(.prt)
DesignSpace (.dsdb)
iMAN Dataset
References
AttributesMethods
iMAN Dataset
References
AttributesMethods
D: Geometry-Prep. and DesignSpace in One DatasetClearness ( + )Geometry-Prep.: ( + )
C: Separate Dataset for Geometry-Prep. as well as for DesignSpace
Clearness ( 0 )Geometry-Prep.: ( + )
![Page 14: Dipl.-Ing. Peter Binde PDM Integration of FEA Design processes -iMAN and DesignSpace – CADFEM Usermeeting 2002 Peter Binde](https://reader030.vdocuments.us/reader030/viewer/2022032612/56649f075503460f94c1ca71/html5/thumbnails/14.jpg)
Dipl.-Ing. Peter Binde
How to Implement
1. Create a new dataset type or modify one of the existing- Insert as reference: UG (*.prt)- Insert as reference: DesignSpace (*.dsdb)
2. Create a new tool- Let the new tool start DesignSpace- Let the tool work on the new dataset type
That‘s it!
![Page 15: Dipl.-Ing. Peter Binde PDM Integration of FEA Design processes -iMAN and DesignSpace – CADFEM Usermeeting 2002 Peter Binde](https://reader030.vdocuments.us/reader030/viewer/2022032612/56649f075503460f94c1ca71/html5/thumbnails/15.jpg)
Dipl.-Ing. Peter Binde
How it looks like
Item-ID and Item-Name
Revision (A)
Folder for FEM Datasets
New FEM Dataset:Can be opened by:- UG: For Geom. Prep- DesignSpace: FEM
Original GeometryDataset
![Page 16: Dipl.-Ing. Peter Binde PDM Integration of FEA Design processes -iMAN and DesignSpace – CADFEM Usermeeting 2002 Peter Binde](https://reader030.vdocuments.us/reader030/viewer/2022032612/56649f075503460f94c1ca71/html5/thumbnails/16.jpg)
Dipl.-Ing. Peter Binde
VIELEN DANK!