dino bro rico tönis account manager dino e&p data 24-03-2011
TRANSCRIPT
DINO BRORico Tönis
Account Manager DINO E&P Data
24-03-2011
10 januari 2011
E&P data in DINO
– DINO is the Dutch National Data Repository (NDR)
– DINO also stores E&P data of The Netherlands
– The DINO department is part of The Geological Survey of the Netherlands
– The DINO department operates the DINO database
– DINO can be accessed by www.nlog.nl or www.dinoloket.nl
2
10 januari 2011
DINO E&P Data flow
10 januari 20113
Intranet TNOwww.DINOloket.nl
www.NLOG.nlFilter
Filter
DINO applications
DINOE&P data from
companies
Disc etc.Service desk
10 januari 2011
Which E&P data is collected
– Well data (logs etc.)
– Seismic data
– Licence data Mining Act
– Well production data (oil, gas, rocksalt, and in near future also geothermal data)
– E&P Infrastucture
– Drilling reports
– Drill cores & drill cuttings
10 januari 20114
10 januari 2011
Why E&P data collection in DINO
– Because there exists a Dutch Mining Act (Petroleum Act)
– Why the need for BRO (allready have DINO & Mining Act)?
Technology update (webservices, skills employees etc.)
BRO will enhance data description and data will be stored at one place (production data, drilling reports). Improvement of data management
Clustering of E&P data with shallow subsurface data gives better recipe for long term survival (America has no NDR…)
BRO will be INSPIRE proof, DINO is not
BRO realizes Dutch government program “Andere Overheid”
BRO will be a new ICT infrastructure in The Netherlands, it will facilitate innovations
10 januari 20115
10 januari 2011
Transition DINO BRO
– Basisregistratie Ondergrond (BRO)
– The BRO will be a Dutch Key Register (1 of 13)
– BRO = DINO 2.0 + BIS 2.0
– BRO project has started
– BRO program leader is Ministry of Infrastructure and Environment
– DINO department plays important role in construction of BRO
10 januari 20116
10 januari 2011
BRO concept
10 januari 20117
BRO Key register Subsurface
Mandatory delivery Mandatory Use
Mandatory feedback
10 januari 2011
BRO concept
10 januari 20118
webservices
systeem systeemBRO register
10 januari 2011
Transition DINO BRO
Core business of BRO project is:
1. Standardization of subsurface data2. Construction of BRO3. Data conversion DINO & BIS BRO
Dutch BRO legislation will follow (Q4 2011)
BRO will be INSPIRE-certified (European Directive)
Objective: BRO is live on 1-1-2014
TNO will be register administrator of BRO
http://www.youtube.com/watch?v=lY0pQ5FZ6ls
10 januari 20119
10 januari 2011
E&P data in BRO
BRO project will standardizes following E&P data types:
1. Mining Act License
2. Mining Act Borehole (logs etc.)
3. Mining Act Well (produced oil, gas, salt, geothermal power, CO2 storage, gas storage etc.)
4. Seismic Surveys
Each standardization traject of a data type is a project
For every data type a data catalogue will be defined
10 januari 201110
10 januari 2011
Data type Mining Act Well
Phase 1: Exploration. In this phase TNO will make an initial proposal to standardize well production data.
Phase 2: Expert group will be discussing the TNO proposal. Expert group will also contain people from industry.
Phase 3: Governmental work group will appove the proposal from the expert group.
Phase 4: Public consultation (www.dinoloket.nl)
Phase 5: BRO steering group will approve (or not) proposed data catalogue from governmental work group
10 januari 201111
VoorbereidingBespreken
expertgroep
Besprekenambtelijke werkgroep
Publieke consultatie
Vaststellen catalogus en
praktijkrichtlijn
< 1-3 maanden > < 2 maanden > < 2 maanden > < 2 maanden > < 2 maanden >
10 januari 2011
Data type Seismic Surveys
Second BRO data type project will start Q3 2011
DINO-DO user meetings always have many seismic data questions
integrate these questions into BRO project “Data type Seismic Surveys”
10 januari 201112
10 januari 2011
Data issues concerning Seismic Surveys
10 januari 201113
Seismic Issues
What seismic data will be stored in the BRO
Field dataPre-stackPost-stackDepth migrated etc.
Conversion 2D analogue data digital data
1. Bulk conversion possible? High costs
2. TNO collects copies of converted 2D data present at companies, commitment companies
3. TNO-DINO will digitize complete surveys to TIFF’s when customer requests data. Costs paid by first customer
Data management Issues www.nlog.nl
NLOG issues:208210240
DINO Data management is making a plan independent from BRO
BRO portal provides better publication of seismic data, more advanced search options
BRO data type Seismic Surveys
Data format
1 2
34
10 januari 2011
Questions
– Interest in paying money for bulk conversion of analogue 2D seismic data to SEG-Y?
Any of you interested in attending BRO session, for example expert group “Seismic Surveys” or “Mining Act Well”?
Or attending a workshop on drawing the BRO work processes?
10 januari 201114
10 januari 2011
Round table discussion“What do users & suppliers of mining act data expect
of the introduction of the BRO”?
1. Will the deep geological model published in the BRO?
10 januari 201115
10 januari 2011
Round table discussion“What do users & suppliers of mining act data expect
of the introduction of the BRO”?
2. Only 2 data formats will be supported as input data for the BRO
a. BRO input datatype and b. an alternative datatype
Will this influence your workproces?
10 januari 201116
webservices
systeem systeemregister
10 januari 2011
Round table discussion“What do users & suppliers of mining act data expect
of the introduction of the BRO”?
3. The communication with the BRO is through webservices, will this effect your work proces?
10 januari 201117
webservices
systeem systeemregister
10 januari 2011
Round table discussion“What do users & suppliers of mining act data expect
of the introduction of the BRO”?
4. Do you think the BRO will cost you money?
10 januari 201118
10 januari 2011
Round table discussion“What do users & suppliers of mining act data expect
of the introduction of the BRO”?
5. When do you think you have to act?
10 januari 201119
10 januari 2011
Round table discussion“What do users & suppliers of mining act data expect
of the introduction of the BRO”?
10 januari 201120
10 januari 2011
Is er informatie in DINO relevant voor SoDM?
Standard for Exchange of Digital Seismic Data, Recommended by TNO
Seismic datasets consist of navigation, velocity and signal (post-stack) data. In addition there is accompanying information about
the data, which is e.g. stored in the headers of the files concerned or in separate acquisition and/or processing reports.
1. Accompanying Information
General:
All three datasets should contain in their headers:
- name of the owner
- name of the area (toponym)
- 2D or 3D
- period of acquisition (last day of acquisition: of day, month and year)
- company code for the project (if applicable)
It is strongly recommended that the line names used in the navigation, velocity and signal data sets match exactly.
Line numbers and CDP-numbers for the navigation, velocity and signal data must correspond.
The data should be accompanied by its outline for 3D, (on paper or as ASCII-file) or by a map indicating the location of each line.
Reports that describe the acquisition and processing of the data can be sent as paper report, word, rtf or pdf-file.
Navigation:
The header should at least contain:
- date and/or version number of the dataset
- date of preparation of the file, tape or other medium
- co-ordinate system, geodetic datum (e.g. ED50 or RD) and the specifications of the projection used
- in the case of 2D lines : for each line or line-segment the relationship needs to be indicated between the SP-
number in the data record and the CDP-number (as used in the SEGY dataset) of the trace which is located at that mentioned SP-
number.
Velocity:
The header should contain:
- type of velocity (e.g. stacking, DMO, migration)
- date of the completion of the processing
- indication to what kind of SP the velocity-time pairs are attached (e.g. CMP, shotpoint, geophone position). For 2D
lines, see remark for navigation data.
Signal (SEGY):
- processing contractor
- description of the processing sequence
- date of the completion of the processing
- grid inline and crossline interval for 3D and nominal CDP-interval for 2D
2. Data Formats
Navigation:
Preferably UKOOA P1/84 (see e.g. First Break 1985, vol. 3, No 10) or UKOOA P1/90 (see First Break 1991, vol. 9, No 4), or SEG
(Shell SPS format) (see Geophysics 1995, vol. 60, No2).
If the standard navigation file is not available, for 3D, also a definition of the bin-grid can be given. E.g. by supplying corner points
coordinates and line/bin numbers.
Velocity:
The ‘Standard’ velocity format, with 6 velocity/time pairs per record of 80 characters (e.g. NAM, ShellV5) is preferred above e.g.
EssoV2.
Line ordering of velocity data must match that of the signal and navigation data.
Note: with 3D surveys processed though PrSTM this may not be possible as the velocities are picked on the gathers from the
original acquisition line orientation and the final migration may be on a different merged or rotated grid. In this instance x, y
locations in the velocity are required.
Signal:
Standard SEG-Y format should be used. Preferably the data format used is 4 bytes floating point (data sample format code = 1).
Data samples should be at least 16 significant bits.
Concerning 3D surveys additional requirements are:
- the traces have to be sorted according to inlines
- each inline has to be followed with a "EOF" mark; so each inline starts with an EBCDIC and a binary header.
- compound bin-numbers may be used, but then the inline and crossline numbers need to be indicated separately
The following byte locations are mandatory:
binary header
* 3205 - 3208 = line number (numerical part of line name)
* 3213 - 3214 = number of data traces per record
* 3217 - 3218 = sample interval in s
* 3221 - 3222 = number of samples per data trace
* 3225 - 3226 = data sample format code
* 3227 - 3228 = nominal CDP fold
trace header
* 001 - 004 = trace sequence number within line (first trace of each line is 1)
* 021 - 024 = CDP ensemble number
* 029 - 030 = trace identification code
* 115 - 116 = number of samples in this trace
* 117 - 118 = sample interval in s
- line number
- compound number in stead of line number and cdp-number
- co-ordinates may also be given in the trace header; the co-ordinate system should be indicated in the
accompanying information.
Please Note:
- the values of ‘number of samples’ and ‘sample interval’ in the binary header should be equal to those in the trace
header,
- the real number of samples in a trace should be equal to the value written in the binary and trace headers.
Data can be either packed or one line per file. The latter is preferred.
In case packed segy-files are supplied, each packed file must be smaller than 2 Gb.
Whether the data are packed should be indicated on the tape or disk label.
If data are packed, it must be done in such a way that no lines are split over two packed files. For packed data, the line number
must be indicated in the trace header.
3. Media and Information
- The signal, navigation- and velocity data are preferred on DVD, CD an USB hard-disk or (Exabyte) 8mm tape.
Media should have labels with the above mentioned information.
If an usb-disk is used, please provide a readme-file with the above mentioned information.
On the tape or disk label the following items should be indicated:
- operator
- survey name and project number (if applicable)
- year of acquisition (end of acquisition dd-mm-yyyy as precise as possible)
- type of data (e.g. CDP position, DMO velocity, final filtered 3D migration)
- format (e.g. P1/84, SEGY, packed or not, TAR if applicable)
- range of inlines (and crosslines)
When signal, navigation and velocity data are stored on tape with the UNIX ‘tar’ or ‘dd’ commands, the correct commands to
retrieve the data have to be indicated.
Information sheet Seismic surveys
The digital data send to TNO concerns the following data.
General:
Name of the ownerName of the area (toponym)2D or 3DPeriod of acquisition or, at least,last day of acquisition (day, month and
year)Period of processing or, at least, the last day of the processing (day, month, year)Company code for the project (if applicable)
□ The location map on paper is annexed.
□ Navigation data □ ukooa file □ included in trace header.
□ Navigation data included in □ UTM31, □ TM5 or □ other, please specify: …………..
□ Signal data
□ Velocity data included.
Signal data is
□ Stack.
□ Post Stack Migration: □ Time □ Depth
□ Pre Stack Migration: □Time □ Depth.
Signal data is □ tarred □ packed □ one file per line.
Trace header location of:
- Line number:
- CDP number:
10 januari 201121