din iso 12128-1998 plain bearings – lubrication holes, grooves and pockets
TRANSCRIPT
-
7/25/2019 DIN ISO 12128-1998 Plain Bearings Lubrication Holes, Grooves and Pockets
1/10
ICS 21.100.10; 21.260
Descriptors: Plain bearings, lubrication systems, dimensions.
Gleitlager Schmierlcher, Schmiernuten und Schmiertaschen Mae,Formen, Bezeichnung und ihre Anwendung fr Lagerbuchsen(ISO 12128 : 1995)
Ref . No. DIN ISO 12128 : 1998-07English pr ice group 07 Sales No.0407
12.98
DEUTSCHE NORM July 1998
ISO 12128
{
ISO Standard comprises 8 pages.
No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin.Beuth Verlag GmbH, D-10772 Berlin, has the exclusive right of sale for German Standards (DIN-Normen).
Plain bearings Lubrication holes, grooves and pocketsDimensions, types, designation and their application
to bearing bushes
(ISO 12128 : 1995)
This standard incorporates International Standard
ISO 12128 Plain bearings Lubrication holes, grooves and pockets Dimensions, types, designation andtheir application to bearing bushes.
A comma is used as the decimal marker.
National foreword
This standard has been prepared by ISO/TC 123.
The responsible German body involved in its preparation was the Normenausschu Gleitlager (RollingBearings Standards Committee).
DIN ISO 2768-1 and DIN ISO 4379 are the standards corresponding to International StandardsISO 2768-1 and ISO 4379, respectively, referred to in clause 2 of the ISO Standard.
AmendmentsDIN 1591 and DIN 1850-2, November 1982 editions, have been superseded by the specifications ofDIN ISO 12128.
Previous editions
DIN 1591: 1927-01, 1939-03, 1952-07, 1969-03, 1982-11; DIN 1850-2: 1962-06, 1969-03, 1982-11.
SupersedesDIN 1591 and DIN 1850-2,November 1982 editions.
-
7/25/2019 DIN ISO 12128-1998 Plain Bearings Lubrication Holes, Grooves and Pockets
2/10
-
7/25/2019 DIN ISO 12128-1998 Plain Bearings Lubrication Holes, Grooves and Pockets
3/10
Page 1ISO 12128 : 1995
Plain bearings Lubrication holes, grooves and pocketsDimensions, types, designation and their application to bearing bushes
-
7/25/2019 DIN ISO 12128-1998 Plain Bearings Lubrication Holes, Grooves and Pockets
4/10
Page 2ISO 12128 : 1995
-
7/25/2019 DIN ISO 12128-1998 Plain Bearings Lubrication Holes, Grooves and Pockets
5/10
Page 3ISO 12128 : 1995
-
7/25/2019 DIN ISO 12128-1998 Plain Bearings Lubrication Holes, Grooves and Pockets
6/10
Page 4ISO 12128 : 1995
-
7/25/2019 DIN ISO 12128-1998 Plain Bearings Lubrication Holes, Grooves and Pockets
7/10
Page 5ISO 12128 : 1995
-
7/25/2019 DIN ISO 12128-1998 Plain Bearings Lubrication Holes, Grooves and Pockets
8/10
Page 6ISO 12128 : 1995
-
7/25/2019 DIN ISO 12128-1998 Plain Bearings Lubrication Holes, Grooves and Pockets
9/10
Page 7ISO 12128 : 1995
-
7/25/2019 DIN ISO 12128-1998 Plain Bearings Lubrication Holes, Grooves and Pockets
10/10
Page 8ISO 12128 : 1995