digital ovulation test digital ovulation test ... - clearblue · this test measures only one...

What’s in the Box?

When to start testing Depends on usual cycle length – refer to pack insertDepends on usual cycle length – refer to pack insert

If user starts testing later than indicated, she may not detect her High Fertility reliably

What sample should be used?

Any time of the day but the same time each dayConcentrated sample (at least 4 hours in the bladder)

First urine after the longest sleepConcentrated sample (at least 4 hours in the bladder)

Getting ready to test

Testing

The ‘Test Ready’ symbol will be displayed.Hold the absorbent sampler in the urine for:

5-7 seconds in the urine stream15 seconds in a collected sample

The ‘New Cycle’ symbol will flash briefly

• The first time the holder is used • If testing after seeing Peak Fertility

• If a test has not been done for 3 days or more

The ‘Test Ready’ symbol will be displayed.Hold the absorbent sampler in the urine for:

3 seconds in the urine stream15 seconds in a collected sample

Remove test stick from foil pouch and remove cap. Insert into holder lining up the arrows– push until it clicks into place.

Holder and disposable test sticks – 7 pack, 10 pack (1 month supply), and 20 pack (2 month supply)

Digital Ovulation Test

Pinpoints YOUR 2 most fertile days

Digital Ovulation Test with Dual Hormone Indicator.

The only test that typically identifies YOUR 4 most fertile days1

TM TM

Continues on the next page.

1 In a study of 87 women, 4 or more fertile days were identified in 80% of cycles using actual cycle length. 2 Robinson J., et al. Increased pregnancy rate with use of Clearblue Easy Fertility Monitor. Fertility and Sterility. (2007) 87:329-3343 Data on file.

Fertility – only on days when requested by the monitor,and must be within pre-set testing window. ‘Test Day’screen will be displayed and orange test light will flash

Pregnancy – once on any day of the cycle, during thetesting window. Recommend from the day the period

is due, but can test up to 3 days early

Fertility – first urine of the day after waking up

Pregnancy – if testing before the period is due, use the first urine after the longest sleep

Hold the absorbent sampler in the urine for:

3 seconds in the urine stream

15 seconds in a collected sample

Replace the cap over the absorbent sampler andremove any excess urine.

Insert the test into the monitor and push until it clicks.

Set a new cycle on day 1 of period. Set a testing window.The calendar then displays the days on which a

fertility test is needed.Select the test required (Fertility/Pregnancy).

Remove test from the foil pouch (Purple = Fertility, White = Pregnancy) and remove cap

Touch Screen Monitor and batteries

Sold separately: 20 fertility tests and 4 pregnancy tests pack

6 pregnancy test pack

Designed to identify ALL your fertile days

Proven to increase the chance of conception by 89%2

TM Advanced Fertility Monitor

Wait for the resultLay the test flat and wait for 3 minutes.

The ‘Test ready’ symbol flashes to show the test is working.

Lay the test flat and wait for 5 minutes.The ‘Test ready’ symbol flashes to show the

test is working.

Low Fertility (No LH surge)

There is a low chance of pregnancy if

user has sex today.Test again tomorrow.

User can test again today, but should use a concentrated urine sample (at least 4 hours in the bladder)

High Fertility

This test measures only one hormone to provide anaccurate detection of peak fertility only – to detectmore of the fertile window, women should use a test

that measures estrogen as well (Clearblue Digital Ovulation Test with Dual Hormone

Indicator or Clearblue Fertility Monitor).

Peak Fertility (LH Surge)

Pregnancy Test Results


There is a low chance of pregnancy if user has sex today. Test again tomorrow.

DO NOT test again today – if the user wants to test morethan once a day she can only do so after she has seen

her high fertility result.

For High Fertility results to be reliable it is important to testonly once a day using the urine after the longest sleep.

A smiley face indicates that the LH surge has been detected.

The highest chances of pregnancy are associated withsex on the first day of the ‘Surge’ and the day after.No need to test again but if the user wants to,

the product will allow her to.

Flashing smiley face.

There is an increased chance ofpregnancy from sex on High days.

Test again tomorrow. User can test again today if desired.

The test will continue to show High Fertility until it detectsthe LH surge.

Not all cycles are the same. The number of fertile daysseen is personal to each woman. Every woman’scycles are unique and hormone patterns differ.

It is not possible for the holder to display High Fertility on the first day of testing as the first test is used to

set a baseline for estrogen.

A smiley face indicates that the LHsurge has been detected.

The highest chances of pregnancy are associated with sexon the first day of the ‘Surge’ and the day after.

The ‘Peak Fertility’ symbol will remain on the displayconstantly for 48 hours after it first appears.

It is not possible to test again until the smiley face disappears.

Please go to http://uk.clearblue.com/healthcare-professionals/pregnancy-tests for details of our Pregnancy Test range

When test is inserted a countdown screen appears:Fertility/Pregnancy testing. Please wait…

Wait 5 minutes for the result. If monitor has turned off,switch it back on, remove the test and read the result.

There is a low chance of pregnancy if user has sex today.

Peak indicates the two most fertile days.

The timing of peak days varies, but Peak is alwaysdisplayed for 2 consecutive days.

There is an increased chance of pregnancy from sex on High days.

The monitor will continue to show High Fertility until itdetects the LH surge or until the 20th test is performed

whichever happens first.The number and timing of the fertile days will vary from

woman to woman and from cycle to cycle. For most women the monitor will identify between 1and 5 days of high fertility before they reach their

peak fertility.3

Continues on the next page.





TM TM



TM Advanced Fertility Monitor

Always read full instruction leaflet of product before use. This material is intended for healthcare professionals only. It is for general information only with no warranties, representations or undertakings, express or implied, and does not constitutemedical advice. It may refer to products not yet registered or approved in a given country. Please ask your local pharmacist or SPD contact for products available in your country. Product images are for illustration only. ClearblueTM is a trade mark ofSPD Swiss Precision Diagnostics GmbH (“SPD”). © 2013 SPD (except for any third party content identified as such). All rights reserved.


The ‘Not Pregnant’ screen is displayed if the user is not pregnant or if she tested too early (hormone levels not high enough).

She should test again when her period is due.

If she tests again on the day her period is due and theresult is still ‘Not pregnant’ she may wish to test again in3 days. If this test gives a ‘Not Pregnant’ result and shestill has not had her period, she should see her doctor

A ‘Pregnant’ screen is displayed if the pregnancyhormone has been detected. She should see her

doctor who will advise on next steps.

Pregnancy Test Results







TMTM TM Advanced Fertility Monitor

digital ovulation test digital ovulation test ... - clearblue · this test measures only one...

Documents