DIGITAL GUIDE

- 1 -

Module BJ3101

DZ7178DZ7177 DZ7179

NORMAL TIME DISPLAY1. Press A for EL.2. Press A to display date.

TIME AND DATE SETTING1.PressBtoentersettingmode;secondswillbeginflashing.2. Press A to set seconds to zero and return to normal time display.3.PressBtwicetosethour.

4.PressAtoincreasedigit;pressandholdAforfastadvance.5.Settingsequenceishour,minutes,monthanddate.6. Press B to exit setting mode.

BA

(for digital movement only)

DZ7006 DZ7043 DZ7046 DZ7142 DZ7143 DZ7144

Module FDT003

LIGHT-UP EL TheEL(light-up)buttonisC.Pressingitoncewillactivatethelight-

upfunctionofthedisplaymakingthedisplayfacevisibleinlow-lightsituationsfor3seconds.PressandholdtheELbuttonfor2secondsandtheAUTOELfunctionisturnedon,markedbytheAutoELicon.ThisfunctionenablestheELtobeactivatedwiththepressingofanyfunctionbuttons.Toturnthisfunctionoff,pressandholdtheELbutton again for 2 seconds.

DUAL TIME Settwodifferenttimezonesandmoveeasilybetweenthetwoby

pressingbuttonAwhileinTimemode,alarmsswitchoveraccordingly.UnderT2setting,no12/24hourmodeadjustment.

SETTING TIME/DATE (Must set in order)1.PressBtillOptionsiconisactivated.PresseitherDorEtill“Tm/Dt”is

highlighted,pressAtoselect.TheTime1,2iconswillbegintoflash.2.PressDorEtohighlighteitherTime1or2,“Tm1orTm2”andpressA

toselect.EithertheTime1,2iconwillbegintoflashdependingonyourselection.

3.TheTimedefaultviewwilldisplaywiththeSECONDSflashingwhilesetting“T1”andbeginwithminutesflashingwhilesetting“T2”.Toresetthesecondsto“00”pressD.PressAtoselectandadvancetotheMINUTEsetting.

4.PressingDwill“+”theminutewhilepressingEwill“–”theminute.PressAtoselectandadvancetotheHOURsetting.

5.PressingDwill“+”thehourwhilepressingEwill“–”thehour.PressAtoselectandadvancetotheMONTHsetting.

6.PressingDwill“+”themonthwhilepressingEwill“–”themonth.Press

AtoselectandadvancetotheDATEsetting.7.PressingDwill“+”thedatewhilepressingEwill“–”thedate.PressA

toselectandadvancetotheYEARsetting.8.PressingDwill“+”theyearwhilepressingEwill“–”theyear.PressAto

selectandadvancetothe12/24HOURsetting.9.PressDorEtohighlighteither12or24hourmode,“12Hor24H”and

pressAtoselect.AtthispointblinkingsecondswillappearagainonthedisplayandyoumaygothroughandchangeanyofthesettingsagainorpressBtoEXITandreturntothe“Tm1,Tm2”menu.PressingBagainwilltakeyoubacktotheOptionsmenu.

REMEMBER if you press and hold B at anytime during the above operation, any settings you have made will be saved and you will go back to TIME mode.

DB

C

EA

Module FL137AX

DZ7101 DZ7102 DZ7103 DZ7125 DZ7126 DZ7127

(for digital movement only)

NORMAL TIME DISPLAY1.PressAtochangedisplay.Displaysequenceistime,calendar,seconds.2.PressBtotoggle12/24-hourformat.

TIME AND DATE SETTING1.PressandholdBfor2secondstoentersettingmode;yearwillbeginflashing.2.PressAtoadvancedigit;pressandholdAforfastadvance.

3.PressBtosetandadvancetonextsettingvalue.4.Settingsequenceisyear,month,date,hour,minute.5. Press B to exit setting mode. NoTE: Hour will be displayed in 24-hour format in time setting mode. NoTE: If no pusher/button is operated for 30 seconds, all changes will be saved and the setting will

automatically return to display mode.

DZ7076 DZ7077 DZ7078 DZ7093 DZ7094

Module F0-002

NORMAL TIME DISPLAY1. Press B for EL.2.PressCtodisplaydate.3.PressDtodisplayalarm.4.PressCandDtotogglealarmon/off.Symbolwillbedisplayedfor

alarm on.5.PressAandDtotogglechimeon/off.Allweekdayswillbedisplayed

forchimeon.

TIME/DATE SETTING1.Fromnormaltimedisplay,pressA3timestoentersettingmode;

secondswillbeginflashing.2.PressCtoresetsecondstozero.3.PressDtoadvancetominutes.

4.PressCtoadvancesettingvalue.5.PressDtosetandadvancetonextsetting.6.Settingsequenceis:seconds,minutes,hour,day,month,andweekday. NoTE: When setting the hour, “H” is displayed for 24 hour format; B or

“P” for 12 hour format.

ALARM SETTING1.Fromnormaltimedisplay,pressA2timestoentersettingmode;hour

willbeginflashing.2.PressCtoadjustsettingvalue.3.PressDtosetandadvancetominutes.4.PressCtoadjustsettingvalue.5.PressAtoexitsettingmodeandreturntoNormalTimeDisplay. NoTE: Alarm will sound for one minute. Press D to stop alarm sound;

press C for 5 minute snooze.

CHRONOGRAPH1.Fromnormaltimedisplay,pressA1timetoenterchronographmode.2.PressCtostart/stopthechronograph.3.PressDtoresettozero. NoTE: While the chronograph is running, press B to return to Normal

Time Display. Chronograph will continue running in the background.

SPLIT TIME MEASUREMENT1.PressDwhilethechronographisrunning.2.PressCtofinalizetimingandexitsplitcount.3.PressDtodisplayallcounts.4.PressDtoreset.

DIGITAL GUIDE

- 2 -

DZ7033 DZ7034 DZ7066 DZ7068 DZ7137 DZ7138 DZ7148

DISPLAY MODESThedigitalportionofthemodulehas(3)threedisplayviewswhichareselectedbypressingA.1.WhileinTIMEview,whetherin12or24hourdisplayisirrelevant,pressAonceandtheDATEviewwillappear.2.TohavealternatingviewsbetweenTIMEandDATEpressAasecondtimeandeachviewwilldisplayfor1second.3.ToreturntoTIMEonlyviewpressAforathirdtime.

SETTING TIME/DATE1.PressCtoenterSETmode.TheYEARwillbeginflashing,pressAtochangetheyear.Thismodulefeaturesan

autocalendarfrom2000to2050.

2.PressCtoadvancetotheMONTHsetting.Themonthwillbeginflashing,pressAtochangethemonth.3.PressCtoadvancetotheDATEsetting.Thedaywillbeginflashing,pressAtochangethedate.4.PressCtoadvancetothe12hr/24hrsetting.The12hcharacterswillbeginflashing,pressAtochangeto24h.5.PressCtoadvancetotheHOURsetting.Thehourwillbeginflashing,pressAtochangethehour.6.PressCtoadvancetotheMINUTEsetting.Theminutewillbeginflashing,pressAtochangetheminute.7.PressCtoadvancetotheSECONDSreset.Thesecondswillbeginflashing,pressAtoresetto00.8.PressCtoexitSETmode.

DZ7111 DZ7112DZ7080DZ7079DZ5174DZ5173

Module ZD0603B01

NORMAL TIME DISPLAY1. Innormaltimedisplay,thedisplayisoff.2. Whenthedisplayisoff,pressAorBtoentertime/datemode.Arealtimedisplayscrollinganimationwill

appearonthedisplayfirst,andthenthetimedisplaywillbeshownfor1second.Followedbydatedisplayscrollinganimation,thedatedisplaywillalsobeshownfor1second,andthenitwillautomaticallyshutoff.

TIME/DATE SETTING1. PressandholdAtoentersettingmode;12/24hourformatselectionwillbeginflashing.

2. PressAtoselect12/24hourformat.3. PressBtosetandadvancetohour.4. PressAtoadvancethesettingvalue.5. PressBtosetandadvancetonextsetting.6. Settingsequenceis:12/24hour,minute,date,month,year.7. Setting will automatically return to time display after year is set.

Module QAA-006 / QAA-033

DZ7095 DZ7096 DZ7106 DZ7113 DZ7116DZ7105

NORMAL TIME DISPLAY1. Press A for EL.2. PressBtochangemode.Modesequenceistime,timezone2,alarm,timer. NoTE: In any setting mode, if no pusher is operated for 10 seconds, all changes

will be saved and the setting will automatically return to display mode.

TIME AND DATE SETTING1. PressandholdAfor3secondstoentersettingmode;12/24-hourformat

willbeginflashing.2. PressBtochange12/24-hourformat.3. PressAtosetandadvancetoseconds.4. Press B to reset seconds to zero.5. PressAtosetandadvancetohour.6. PressBtoincreasedigits;pressandholdBforfastadvance.7. PressAtosetandadvancetonextsettingvalue.8. Settingsequenceis12/24-hourformat,seconds,hour,minutes,year,

month,date.9. Press A to exit setting mode. NoTE: Weekday will automatically update upon exiting setting mode.

TIME ZONE 21. PressBtochangetotimezone2.2. PressandholdAfor3secondstoentersettingmode;hourwillbegin

flashing.3. PressBtoincreasedigit;pressandholdBforfastadvance.4. PressAtosetandadvancetominutes.5. PressBtoincreasedigit;pressandholdBforfastadvance.6. Press A to exit setting mode.

ALARM MODE1. PressBtochangetoalarmmode.2. PressandholdBfor3secondstotogglealarm/chimeon/off.3. Alarmwillsoundfor10seconds.Pressanypushertosilencealarm.

ALARM SETTING1. Inalarmmode,pressandholdAfor3secondstoentersettingmode;

hourwillbeginflashing.2. PressBtoincreasedigit;pressandholdBforfastadvance.3. PressAtosetandadvancetominute.

4. PressBtoincreasedigit;pressandholdBforfastadvance.5. Press A to exit setting mode.

COUNTDOWN TIMER1. PressBtochangetotimermode.2. PressAtostart/stopthetimer.3. Whentimerreacheszero,alarmwillsoundfor15seconds.4.Pressanypushertosilencealarm.

TIMER SETTING1. PressandholdAfor3secondstoentersettingmode;hourwill

beginflashing.2. PressBtoincreasedigit;pressandholdBforfastadvance.3. PressAtosetandadvancetonextsettingvalue.4. Settingsequenceishour,minute,second.5. Press A to exit setting mode.

DZ7092 DZ7110DZ7091 DZ7109

Module MLL-045

NORMAL TIME DISPLAY1.Ateachhour,timewillautomaticallydisplayfor2seconds.2. Press B for time display and animation.3.PressBagaintotoggletime/datemode.4.Whentimeordateisdisplayed,pressandholdBfor3secondstotogglehorizontal/verticaldisplay.

TIME AND DATE SETTING1.Fromtimedisplay,pressandholdA;12/24hourformatwillbeginflashing.2.PressBtoselect12/24hourformat.3.PressAtosetandadvancetohour.4.PressBtoadvancedigit.5.PressAtosetandadvancetonextsettingvalue.

6.Settingsequenceis:12/24hourformat,hour,minutes,date,month.7.PressAtosaveandexitsettingmode. NoTE: In 12 hour format, a small dot will be shown in the upper left hand corner of the display to indicate p.m. time. NoTE: If no pusher is operated for 7 seconds, settings will be saved and the display will return to normal time display.

PERSONAL MESSAGE SETTING1.PressBtodisplaytime,pressBagaintodisplaydate,pressandholdA;firstletterofmessagewillbegin

flashing.2.PressBtoselectcharacter.3.PressAtosetandadvancetothenextcharacter.4.Repeatstepsuntildesiredmessageiscomplete.Pleasenotethereareonlytenspacesavailable.

SHOWING DATE

DAY

MONTHDATE

AM SECOND

HOUR MINUTE

TIME DISPLAY MODE

Module FLO75AB

A

B

DZ7190DZ7189

DIGITAL GUIDE

- 3 -

Module FL610

DZ7169DZ7118 DZ7170DZ7119 DZ7171DZ7120 DZ7172DZ7121

NORMAL TIME DISPLAY1.PressAtochangemode.Modesequenceisnormaltime,alarm,time

zone2,timer,andchronograph.2. Press B for EL. NoTE: At any point in any setting mode, press D to exit setting mode. NoTE: In any setting mode, if no pusher is operated for 2 minutes,

all changes will be saved and the setting will automatically return to display mode.

TIME AND CALENDAR SETTING1.Innormaltimedisplay,pressD;secondswillbeginflashing.2.PressCtosetsecondstozero.3.PressAtoadvancetohour.4.PressCtoadvancedigit,pressandholdCforfastadvance.5.PressAtosetandadvancetonextsettingvalue.6.Settingsequenceis:seconds,hour,minute,year,month,anddate.7.PressDtoexitsettingmode. NoTE: Weekday is automatically updated upon exiting setting mode. NoTE: At any point in setting mode, press B to toggle 12/24 hour format.

ALARM MODE1.PressAtochangetoalarmmode.2.PressBtotogglealarm/chimeon/off.

ALARM SETTING1.PressAtochangetoalarmmode.2.PressDtoentersettingmode;hourwillbeginflashing.3.PressCtoadvancedigit;pressandholdCforfastadvance.4.PressAtosetandadvancetonextsettingvalue.5.Settingsequenceis:hour,minutes,month,date.Fordailyalarm,leave

monthanddatesetat“----”6.PressDtoexitsettingmode.

TIME ZONE 21.PressAtochangetotimezone2. NoTE: In time zone 2 display, normal time is shown in the upper portion of

the display.2.PressDtoentersettingmode;hourwillbeginflashing.3.PressCtoadvancedigit,pressandholdCforfastadvance.4.PressAtosetandadvancetominutes.5.PressCtoadvancedigit,pressandholdCforfastadvance.6.PressDtoexitsettingmode. NoTE: At any point in setting mode, press B to toggle 12/24 hour format.

COUNTDOWN TIMER1.PressAtochangetotimermode.

2. Press B to clear countdown and reset timer.3.PressCtostart/stopthetimer.

TIMER SETTING1.PressDtoentersettingmode;hourwillbeginflashing.2.PressCtoadvancedigit;pressandholdCforfastadvance.3.PressAtosetandadvancetonextsettingvalue.4.Settingsequenceis:hour,minutes,seconds.5.PressDtoexitsettingmode. NoTE: At any point in setting mode, press B to toggle auto reset on/off.

When auto reset is on, timer will automatically re-start upon reaching zero.

CHRONOGRAPH MODE1.PressAtochangetochronographmode.2.PressCtostart/stopthechronograph.3. Press B to reset to zero.

SPLIT TIME1.PressBwhilethechronographisrunningforsplittime.2.PressBagaintoreturntochronograph.3.PressCtofinalizetiming.4. Press B to reset to zero.

Module G1 / G3

DZ7122 DZ7123 DZ7152 DZ7180 DZ7185DZ7184 DZ7186

NORMAL TIME DISPLAY1.PressAtochangemode.Modesequenceisnormaltime,recall,alarm,and

countdown timer.2.PressandholdA3secondstotoggleautoELon/off.3. Press B for EL.4.PressCtotogglehourlychimeon/off.5.PressDtoflashtimezone2.PressandholdD3secondstotogglenormal

timedisplay/timezone2. NoTE: In any mode, press and hold C 3 seconds to change to

chronograph mode. NoTE: At any point in any setting mode, press B to exit setting mode. Time

and Calendar Setting6.Innormaltimedisplay,pressandholdB3seconds;hourwillbeginflashing.7.PressCtoincreasedigit;pressDtodecreasedigit.PressandholdCorD

forfastincrement/decrement.8.PressAtosetandadvancetonextsettingvalue.9.Repeatsteps2and3throughsettingsequence.Settingsequenceis:hour,

minute,second,year,month,date,12/24-hourformat,month/dateordate/monthformat.

10.Press B to exit setting mode.11.TosetTimeZone2,pressandholdD3secondstochangetoTimeZone.12.Thenusesteps1-5toset. NoTE: Weekday is automatically updated upon exiting setting mode.

RECALL MODE1.PressAtochangetorecallmode. NoTE: If no data is stored, display will show No DATA. If data is saved,

display will show the current set (1-9).2.PressCtotogglethroughsetdata:totaltime,besttime,averagetime,

andeachlap(upto100laps).3.PressDtodisplaycurrentset;pressDagaintoscrolltonextset.4.PressandholdD3secondstodeleteallstoreddatainthecurrentset. NoTE: At any point in recall displays, press A to exit and change to

alarm mode.

ALARM MODE1. PressAtochangetoalarmmode.2.PressCtotogglealarmon/off.3.PressDtotogglealarm1/alarm2.

ALARM SETTING1.Inalarmmode,pressandholdB3seconds;hourwillbeginflashing.2.PressCtoincreasedigit;pressDtodecreasedigit.PressandholdCor

Dforfastincrement/decrement.3.PressAtosetandadvancetonextsettingvalue.4.Repeatsteps2and3throughsettingsequence.Settingsequenceis:

hour,minute,timezone1/timezone2.5.PressBtoexitsettingmode. NoTE: Alarm will sound for 20 seconds. Press any pusher to silence alarm.

COUNTDOWN TIMER1.PressAtochangetotimermode.Defaultsettingis5minutes.2.PressCtostarttimer;pressDtostopthetimer.3.PressandholdD3secondstoclearthecountdownandresetthetimer.

NoTE: Alarm will sound for 20 seconds when countdown reaches zero. Press any pusher to silence alarm.

TIMER SETTING1.Intimermode,pressandholdB3secondstoentersettingmode;

hourwillbeginflashing.2.PressCtoincreasedigit;pressDtodecreasedigit.Pressandhold C

orDforfastincrement/decrement.3.PressAtosetandadvancetonextsettingvalue.4.Repeatsteps2and3throughsettingsequence.Settingsequenceis:

hour,minute,seconds.5. Press B to exit setting mode.

CHRONOGRAPH MODE1.Inanymode,pressandholdC3secondstochangeto

chronographmode.2.PressCtostartthechronograph;pressDtostopthechronograph.3.PressandholdD3secondstoresettozero.

LAP COUNTING1.PressCwhilethechronographisrunningforlapreading. NoTE: If no other pusher is pressed after C is pressed, display will

automatically show total chronograph time after 5 seconds, then next lap running time after another 5 seconds.

2.PressBtoreturntochronographnextlap(upto100laps).3.PressDtostopchronograph.4.PressandholdB3secondstosavesetdata,orpressandhold D3secondstoresettozero.

NORMAL TIME DISPLAY1.PressAtochangemode.Modesequenceis:normaltime,chronograph,

alarm,timesetting.2. Press B to display alarm.3.PressCtodisplaydate.4.PressA+Btotogglechimeon/off(alldaysoftheweekwilldisplay

for“on”).5.PressB+Ctotogglealarmon/off.Alarmwillsoundfor60seconds;

pressBtosilencealarmorpressDforsnoozefunction(alarmwillsound5minuteslater).

CHRONOGRAPH MODE1.PressAtochangetochronographmode.2.PressCtostart/stopthechronograph.

3.PressBwhenthechronographisstoppedtoreset. NoTE: When the chronograph is running, press A to return to normal

time display. Chronograph will continue to count time.

SPLIT TIME1.PressBwhilethechronographisrunning.2.PressCtofinalizetiming.3. Press B to display all counts.4. Press B again to reset.

ALARM MODE1.PressAtochangetoalarmmode;hourwillbeginflashing.2.PressCtoincreasedigits;pressandholdCforfastadvance.3.PressBtoadvancetominutes.

4.PressCtoincreasedigits;pressandholdCforfastadvance.5.PressBtosavedata.6. Press A to exit and return to normal time display.

TIME AND DATE SETTING1.PressAtochangetotimesettingmode;secondswillbeginflashing.2.PressCtoresetsecondstozero.3.PressBtoadvancetominutes.4.PressCtoincreasedigits;pressandholdCforfastadvance.5.PressBtosetandadvancetonextsettingvalue.6.Settingsequenceis:seconds,minute,hour,date,month,weekday. NoTE: When setting the hour, “H” will display for 24-hour format, A or

“P” will display for 12-hour format.

Module BJ3170(for digital movement only)

DZ7157DZ7156DZ7153

B

DA

C

B

DA

C

DZ7190DZ7189

DIGITAL GUIDE

- 4 -

Module FL388AB / Module QFL226

DZ7081 DZ7082 DZ7130 DZ7131 DZ7132 DZ7146 DZ7150 DZ7151 DZ7181

OVERVIEWFeaturesincludeDUALTIME/DATE,CHRONO,TIMER,ALARM,andLIGHTUPEL.

LIGHT-UP ELPressAtoactivatelight-upfunctionfor3seconds.

TIME OF DAY MODE1.PressCtotogglebetweenTime1andTime2.2.HoldCfortwosecondstosetTime1or2asdefault.3.PressDtoturnon/offkeytone. Time 1 >TosetTime,pressAuntilhourflashes.PressBtoselectthesetting

item.UseCandDbuttonstoadjustthevaluesupordown.PressAtoexit set mode.

Time 2 >TosetTime,pressAuntilhourflashes.PressBtoselectthesetting

item.UseCandDbuttonstoadjustthevaluesupordown.PressAto

exit set mode. >TherangedifferencebetweenTime1andTime2is23hours.

CHRONO MODE1.PressCtostartandstopchronograph.2.PressDtoSplit/Resetthechronograph.3.PressAtorecallthememoryifChronographisstopped.4.PressAagaintoviewthenextlap.5.PressCorDtoexitRecallmodeandgobacktoChronographmode.6.Thereareatotalof10lapmemories.

TIMER MODE1.Thereare3differentmodesoftimer:CountDown-Stop,CountDown-

Repeat,CountDown-andUp.2.PressCtostart/stopthetimercounting.3.PressDtoresetthecountertothepresetvalueiftimerisstopped.4.PressandholdAfor2secondstoenterTimerSettingMode.35Timer

Setting Mode.

5.PressBtocyclearoundthesettingitem:timer-type,hour,minute,secondandtobacktimer-typeagain.

6.PressCandDtoincrease/decreasethesettingvalue.7.PressAtoexitthesettingmode.

TIMER ALARMTimeralarmwillbeep2timesasecondfor30seconds.

ALARM MODE1.PressCtoselectthealarm.2.PressDtoenable/disablethealarm.3.PressBtochangetoTimemodeagain.

ALARM SETTING MODE1.PressandholdAfor2secondstoenterthealarmsettingsmode.2.PressCandDtoincreaseordecreasethesettingsvalue.3.PressAtoexitthesettingsmode.

Module FL145GR3

DZ7069 DZ7070 DZ7071 DZ7087 DZ7117

OVERVIEWFeaturesincludeDUALTIME/DATE,CHRONO,TIMER,ALARM,andLIGHTUPEL.

LIGHT-UP ELPressAtoactivatelight-upfunctionfor3seconds.

TIME OF DAY MODE1.PressCtotogglebetweenTime1andTime2.2.HoldCfortwosecondstosetTime1or2asdefault.3.PressDtoturnon/offkeytone. Time 1 >TosetTime,pressAuntilhourflashes.PressBtoselectthesetting

item.UseCandDbuttonstoadjustthevaluesupordown.PressAtoexit set mode.

Time 2 >TosetTime,pressAuntilhourflashes.PressBtoselectthesetting

item.UseCandDbuttonstoadjustthevaluesupordown.PressAto

exit set mode>TherangedifferencebetweenTime1andTime2is23hours.

CHRONO MODE1.PressCtostartandstopchronograph.2.PressDtoSplit/Resetthechronograph.3.PressAtorecallthememoryifChronographisstopped.4.PressAagaintoviewthenextlap.5.PressCorDtoexitRecallmodeandgobacktoChronographmode.6.Thereareatotalof10lapmemories.

TIMER MODE1.Thereare3differentmodesoftimer:CountDown-Stop,CountDown-

Repeat,CountDown-andUp.2.PressCtostart/stopthetimercounting.3.PressDtoresetthecountertothepresetvalueiftimerisstopped.4.PressandholdAfor2secondstoenterTimerSettingMode.35Timer

Setting Mode.

5.PressBtocyclearoundthesettingitem:timer-type,hour,minute,secondandtobacktimer-typeagain.

6.PressCandDtoincrease/decreasethesettingvalue.7.PressAtoexitthesettingmode.

TIMER ALARMTimeralarmwillbeep2timesasecondfor30seconds.

ALARM MODE1.PressCtoselectthealarm.2.PressDtoenable/disablethealarm.3.PressBtochangetoTimemodeagain.

ALARM SETTING MODE1.PressandholdAfor2secondstoenterthealarmsettingsmode.2.PressCandDtoincreaseordecreasethesettingsvalue.3.PressAtoexitthesettingsmode.

Module QFL631

DZ7168DZ7164 DZ7166DZ7162 DZ7176DZ7165 DZ7167DZ7163

NORMAL TIME DISPLAY1. Press B for time display.2. Press B again immediately for date display.3.Aftertimeordatedisplay,messagewillscroll.Displaywillautomatically

turn off after message scrolling is complete.

TIME AND DATE SETTING1.PressandholdAfor2secondstoentersettingmode;12/24-hour

formatwillbeginflashing.

2.PressBtoselect12/24hourformat.3.PressAtoadvancetohour.4.PressBtoincreasedigits;pressandholdBforfastadvance.5.PressAtoadvancetonextsettingvalue.6.Settingsequenceis:12/24-hourformat,hour,minutes,year,month,

date7.PressAtosaveandexitsettingmode. NoTE: If no pusher is operated for 7 seconds, settings will be saved

and the display will automatically turn off.

MESSAGE SETTING1.Incalendarmode,pressandholdAfor2secondstoentersetting

mode;firstcharacterwillbeginflashing.2.PressBtochangethecharacter.3.PressAtoadvancetonextcharacter. NoTE: Maximum message length is 10 characters.

B

A

A

DB

C

A

DB

C