digital electricity power panel for sdn
TRANSCRIPT
FEATURES SUMMARY: 10 isolated low voltage motor ports Provides
power to SDN Device Ports from
internal power supplies. (Bus Power Supply is not needed for non-networked Power Panels)
2 Device Ports isolated from SDN Bus Includes bus segment status LEDs for;
• Power • Communication • End of line notification
Protects system components from mis-wire Can mount on-wall or in-wall (between studs) Separated line and low-voltage areas Front cover includes two handles with
keyed locks cULus Listed
TECHNICAL SPECIFICATIONS: Input: Digital Electricity™(DE) from the Digital Electricity™ Transmitter. Motor Output: 24V DC fused at 2A Power Consumption: Consumes 0 units on bus (Consumes power from
internal power supplies). Each device port supports 1 device, up to 8 power units. (Bus Power is not needed if Bus In and Out ports are not used)
Material: Steel enclosure Dimensions: 19.75” L 14.95” W x 4.14” H (inner) Dimensions: 20.75” L 15.20” W x 5.65” H (inner with door) Maximum Wiring Distance
• To motors: Up to 240ft per motor port. Somfy requires the use of the SDN
Low-voltage Motor Power and Data Cable, available in both Plenum (US: 9020127, Canada: 9020453) and Non-Plenum (US: 9020126, Canada: 9020452) versions
• To devices: Up to 200 ft. per device port
Operating Temperature Range: Ambient temperature Shipping Weight: 26 lbs. Indoor use only
CABLE PINOUTS:
Digital Electricity™ Power Panel for SDN Includes Digital Electricity™ Receiver (1870520)
(10) Low-voltage motor to panel connectors Keys
The Digital Electricity™ Power Panel for SDN is a Somfy Digital Network™ (SDN) bus distribution component used to add 10 isolated motor ports and two isolated device ports to an SDN bus segment. This Power Panel is power by a Digital Electricity™(DE) transmitter and receives input power from Digital Electricity instead of standard 120V AC line-voltage. The isolated motor ports support up to 240 feet of power and data wiring to Somfy's range of low-voltage SDN motors. The in-wall or on-wall mountable enclosure offers easily accessible line and low-voltage areas for simplified of installation. This product can be used in small SDN systems with two control devices and 10 individual motors as a stand-alone solution and large scale SDN or animeo® IP systems.
OVERVIEW:
WHAT’S IN THE BOX:
SOMFY DIGITAL NETWORK SYSTEM OVERVIEW: Somfy Digital Network™ (SDN) is Somfy’s intelligent wired shading network. An SDN system is comprised of bus distribution devices that create a network for user interfaces, motorized applications and sensors to be connected. SDN is scalable and suitable for both small and large projects. The same components are used whether an SDN system remains standalone, integrated into third party automation systems, or with Somfy’s animeo® IP automated total solar management system.
Digital Electricity™ Power Panel for SDN Item #: 1870628
CONNECTIONS AND INDICATORS:
H Bus High (I) Green No Data Data
L Bus Low (A) Green Data No Data
E End of Bus Yellow End of Bus Not End of Bus
D Device LED Green Device port powered Device port not powered
Isolated Motor Port
Motor Input Connector
1 - Data + 2 - Data - 3 - Reserved 4 - Power + 5 - Power + 6 - Reserved 7 - Ground - 8 - Ground -
SDN Input Motor Input
Silver = Drain
Data and Power Cable 24V DC / SDN Control 5 conductor cable
Somfy SDN Low-voltage Motor Cable
9020127 - Plenum Rated
D
DIGITAL ELECTRICITY™ (DE) OVERVIEW: Digital Electricity™ is a Limited Power Source which allows it to utilize standard 12-18AWG multi-conductor cabling, without conduit, while conforming to the National Electric Code standards for building installations (NOTE: Always follow local codes). The Digital Electricity™ Range are listed products, certified to safety and EMC standards by a Nationally Recognized Test Laboratory.
NOTE: use connector included with this power panel
Non-plenum Rated: US: 9020126 Canada: 9020452
Plenum Rated: US: 9020127 Canada: 9020453
Required conductors for SDN
SDN Low-voltage Motor Power and Data Cable 24V DC/SDN Control 5 Conductor Cable
ELEMENT FUNCTION
1 Power Input Screw terminal block. Only use 14AWG solid or stranded.
2 SDN Bus Input Input for bus signals
3 SDN Bus Output Output for bus signals
4 Isolated Motor Port 10 low voltage motors to SDN network
5 Device Ports Connect SDN Device to Power Panel (1 SDN Device per port. Max. 200 ft. each)
www.somfysystems.com
RoHS IP65
HAZARDOUS VOLTAGE2.56"
[65mm] 3.78"
20.75
15.20
SDN Low-voltage Motor Power and Data Cable
SDN Low-voltage Motor Power and Data Cable
Sonesse® 30 RS485 DCSonesse® 50 ULTRA RS485 DC Irismo™ 35 Mini DC
SDN Ir is
N Power Panel
DE Transmitter
DE Receiver
The diagram shown below is meant for illustrative purposes to show the connections from product to product. This device could be used in other configurations than shown below. For specification information on individual products see related product information. Follow all SDN wiring standards for distance limitations.
Adds 10 isolated motor ports and 2 isolated device ports to a system. Each device port supports 1 device, up to 8 power units Motor wiring distance up to 240 ft per motor port. Somfy requires the use of the SDN Low-voltage Motor Power and Data Cable, available in both
Plenum (US: 9020127, Canada: 9020453) and Non-Plenum (US: 9020126, Canada: 9020452) versions from Somfy. Maximum 200 ft. per isolated device port.
NOTE: Provides power to SDN Device Ports from internal power supplies. Consumes power from internal power supplies. (Bus Power is not needed if Bus In and Out ports are not used)
R TS
RTS Transmitter
M O
TO R
S B
U S
D IS
TR IB
U TIO
N U
S E
R IN
TE R
FA C
E S
SDN Low-voltage Motor Power and Data Cable
SDN Low-voltage Motor Power and Data Cable
Sonesse® 30 RS485 DCSonesse® 50 ULTRA RS485 DC Irismo™ 35 Mini DC
SD N Power Panel
Co py
rig ht
S om
fy S
ys te
m s,
In c.
8 /2
02 0
The Digital Electricity™ Receiver is a component in a Digital Electricity™(DE) line powering system. When paired with a Digital Electricity™(DE) transmitter unit, a Digital Electricity™(DE) system is formed (see diagram). If a person or foreign conductor comes in contact with the DE wiring, power is disconnected; preventing fire, equipment damage and personal injury. The safety features of the DE system allow it to be operated as an IEC-60950-21 compatible limited power source over standard multi-conductor cabling, without conduit, while conforming to the National Electric Code standards for building installations. This Receiver provides up to 3A at a nominal output voltage of 336VDC.
OVERVIEW:
Digital Electricity™ Receiver Item #: 1870520 (Included in Digital Electricity™ Power Panel for SDN)
DIGITAL ELECTRICITY™ (DE) OVERVIEW: Digital Electricity™ is a Limited Power Source which allows it to utilize standard 12-18AWG multi-conductor cabling, without conduit, while conforming to the National Electric Code standards for building installations (NOTE: Always follow local codes). The Digital Electricity™ Range are listed products, certified to safety and EMC standards by a Nationally Recognized Test Laboratory.
FEATURES SUMMARY: Safe to the touch electrical distribution Extend power distribution to 1,000 ft. per output port
*Max distance is dependent on the installation and gauge of the cabling used between the Transmitter and Receiver.
Use 12-18 AWG cable to distribute power The Digital Electricity™ Receiver is designed into the Digital Electricity Power Panel for SDN (1870628) The Digital Electricity Receiver features over and under voltage, over-current, short circuit and over-temperature protection Features a compact design with mounting tabs that allow for easy installation within the Somfy Power Panel for SDN
TECHNICAL SPECIFICATIONS: Input Voltage: 310-350V (336V Nominal),
*Must be supplied by listed Digital Electricity™ Transmitter
• Number of Channels: 1 • Current Per Input Channel: 3A MAX • Input Wire Gauge: 12-18AWG *Factory installed cable whips are 18AWG
• Input Cable Diameter: 0.105”-0.315” (2.7mm-8.0mm) (includes insulation) Output Voltage: 315-350 V (336 V Nominal) - Digital Electricity™
• Number of output channels: 1 • Current: 3.0A Max • Efficiency @ max load: 96% - AE to DE Conversion Efficiency • Continuous Operating Output Power 1000 W • Max Distance:(from Transmitter) 1,000 ft.
*Max distance is dependent on the installation and gauge of the cabling used between the Transmitter and Receiver.
Environment: • Operating Temperature: -4°F (-20°C) to 104°F (40°C) • Exposure Ratings: IP65 • Altitude: Up to 6,600 ft. (2000m) • Humidity: 5 to 95 %
Dimensions: 4.72” x 4.05” x 1.79” (120 x 103 x 45.5 mm) Weight: 1 lbs. (2.2 kg) Approvals:
• Safety: IEC 60950-1 NRTL SZAA (Bureau Veritas)
• Electro-magnetic compliance: CFR 47 FCC Part 15 Class A (USA) EN 55022 - Class A EN 55024
• Environmental: RoHS • General: CE
Normal Operation
Boot-up Start-up sequence occurs when power is first applied to the receiver.
Pre-charge DE Part of normal start-up sequence
Pre-charge Load Part of normal start-up sequence
FAULTS LED PATTERN FAULT CODE TROUBLESHOOTING LOAD CONNECTION 2 Blinks Connection problem between receiver output and load
Check receiver output polarity Check connections to load
OVERLOAD 3 Blinks Load Current too high Reduce Load Check wiring
TRANSMITTER 4 Blinks Transmitter Power Problem Check transmitter card(s) Check wiring from transmitter
TEMPERATURE 5 Blinks Receiver over temperature Reduce ambient temp surrounding receiver Reduce Load
SHORT CIRCUIT 6 Blinks Short Circuit detected between receiver and load Check wiring Check load for short circuit or ground fault
INTERNAL FAILURE 8 Blinks Internal hardware Failure Contact Voltserver
INDICATORS: (SEE LED WINDOW ON DRAWING IN DIMENSIONS)
Pin Color Description 1 White DE Input Neg (-) 2 Black DE Input Pos (+) 3 Green Not Used
Pin Color Description 1 White 336V Out Pos (+) 2 Black 336V Out Pos (+) 3 Green Ground
Pre-terminate input cable whip pin-out Pre-terminate output cable whip pin-outInput Connection to Digital Electricity Transmitter: Output Connection to Power Panel for SDN:
Negative (-)
Positive (+)
Green = ground
BEST WIRING PRACTICES: The diagram shown below is meant for illustrative purposes to show the connections from product to product. This device could be used in other configurations than shown below. For specification information on individual products see related product information. Follow all SDN wiring standards for distance limitations.
Each Digital Electricity Transmitter adds 8 isolated power ports to operate a Digital Electricity Power Panel for SDN (1870628) in a system. - Only one Digital Electricity Receiver can be connected to each DE Output Port on the Digital Electricity Transmitter
Digital Electricity wiring distance up to 1,000 ft. per port between Digital Electricity Transmitter and Digital Electricity Receiver using 12-18 AWG 2 conductor cable. *Max distance is dependent on the installation and gauge of the cabling used between the Transmitter and Receiver.
Important: Refer to product specification sheet for use of the Power Panel for SDN (1870628)
4.72" [120mm]
RoHS IP65
HAZARDOUS VOLTAGE2.56"
[65mm] 3.78"
1.79" [45mm]
4.72" [120mm]
2.56" [65mm]
3.78" [96mm]
1.79" [45mm]
LED WINDOW
P O
W E
R D
IS TR
IB U
TI O
SDN Low-voltage Motor Power and Data Cable
SDN Low-voltage Motor Power and Data Cable
Sonesse® 30 RS485 DCSonesse® 50 ULTRA RS485 DC Irismo™ 35 Mini DC
SDN Ir is
SD N Power Panel
SDN Low-voltage Motor Power and Data Cable
SDN Low-voltage Motor Power and Data Cable
Sonesse® 30 RS485 DCSonesse® 50 ULTRA RS485 DC Irismo™ 35 Mini DC
SD N Power Panel
Co py
rig ht
S om
fy S
ys te
m s,
In c.
8 /2
02 0
internal power supplies. (Bus Power Supply is not needed for non-networked Power Panels)
2 Device Ports isolated from SDN Bus Includes bus segment status LEDs for;
• Power • Communication • End of line notification
Protects system components from mis-wire Can mount on-wall or in-wall (between studs) Separated line and low-voltage areas Front cover includes two handles with
keyed locks cULus Listed
TECHNICAL SPECIFICATIONS: Input: Digital Electricity™(DE) from the Digital Electricity™ Transmitter. Motor Output: 24V DC fused at 2A Power Consumption: Consumes 0 units on bus (Consumes power from
internal power supplies). Each device port supports 1 device, up to 8 power units. (Bus Power is not needed if Bus In and Out ports are not used)
Material: Steel enclosure Dimensions: 19.75” L 14.95” W x 4.14” H (inner) Dimensions: 20.75” L 15.20” W x 5.65” H (inner with door) Maximum Wiring Distance
• To motors: Up to 240ft per motor port. Somfy requires the use of the SDN
Low-voltage Motor Power and Data Cable, available in both Plenum (US: 9020127, Canada: 9020453) and Non-Plenum (US: 9020126, Canada: 9020452) versions
• To devices: Up to 200 ft. per device port
Operating Temperature Range: Ambient temperature Shipping Weight: 26 lbs. Indoor use only
CABLE PINOUTS:
Digital Electricity™ Power Panel for SDN Includes Digital Electricity™ Receiver (1870520)
(10) Low-voltage motor to panel connectors Keys
The Digital Electricity™ Power Panel for SDN is a Somfy Digital Network™ (SDN) bus distribution component used to add 10 isolated motor ports and two isolated device ports to an SDN bus segment. This Power Panel is power by a Digital Electricity™(DE) transmitter and receives input power from Digital Electricity instead of standard 120V AC line-voltage. The isolated motor ports support up to 240 feet of power and data wiring to Somfy's range of low-voltage SDN motors. The in-wall or on-wall mountable enclosure offers easily accessible line and low-voltage areas for simplified of installation. This product can be used in small SDN systems with two control devices and 10 individual motors as a stand-alone solution and large scale SDN or animeo® IP systems.
OVERVIEW:
WHAT’S IN THE BOX:
SOMFY DIGITAL NETWORK SYSTEM OVERVIEW: Somfy Digital Network™ (SDN) is Somfy’s intelligent wired shading network. An SDN system is comprised of bus distribution devices that create a network for user interfaces, motorized applications and sensors to be connected. SDN is scalable and suitable for both small and large projects. The same components are used whether an SDN system remains standalone, integrated into third party automation systems, or with Somfy’s animeo® IP automated total solar management system.
Digital Electricity™ Power Panel for SDN Item #: 1870628
CONNECTIONS AND INDICATORS:
H Bus High (I) Green No Data Data
L Bus Low (A) Green Data No Data
E End of Bus Yellow End of Bus Not End of Bus
D Device LED Green Device port powered Device port not powered
Isolated Motor Port
Motor Input Connector
1 - Data + 2 - Data - 3 - Reserved 4 - Power + 5 - Power + 6 - Reserved 7 - Ground - 8 - Ground -
SDN Input Motor Input
Silver = Drain
Data and Power Cable 24V DC / SDN Control 5 conductor cable
Somfy SDN Low-voltage Motor Cable
9020127 - Plenum Rated
D
DIGITAL ELECTRICITY™ (DE) OVERVIEW: Digital Electricity™ is a Limited Power Source which allows it to utilize standard 12-18AWG multi-conductor cabling, without conduit, while conforming to the National Electric Code standards for building installations (NOTE: Always follow local codes). The Digital Electricity™ Range are listed products, certified to safety and EMC standards by a Nationally Recognized Test Laboratory.
NOTE: use connector included with this power panel
Non-plenum Rated: US: 9020126 Canada: 9020452
Plenum Rated: US: 9020127 Canada: 9020453
Required conductors for SDN
SDN Low-voltage Motor Power and Data Cable 24V DC/SDN Control 5 Conductor Cable
ELEMENT FUNCTION
1 Power Input Screw terminal block. Only use 14AWG solid or stranded.
2 SDN Bus Input Input for bus signals
3 SDN Bus Output Output for bus signals
4 Isolated Motor Port 10 low voltage motors to SDN network
5 Device Ports Connect SDN Device to Power Panel (1 SDN Device per port. Max. 200 ft. each)
www.somfysystems.com
RoHS IP65
HAZARDOUS VOLTAGE2.56"
[65mm] 3.78"
20.75
15.20
SDN Low-voltage Motor Power and Data Cable
SDN Low-voltage Motor Power and Data Cable
Sonesse® 30 RS485 DCSonesse® 50 ULTRA RS485 DC Irismo™ 35 Mini DC
SDN Ir is
N Power Panel
DE Transmitter
DE Receiver
The diagram shown below is meant for illustrative purposes to show the connections from product to product. This device could be used in other configurations than shown below. For specification information on individual products see related product information. Follow all SDN wiring standards for distance limitations.
Adds 10 isolated motor ports and 2 isolated device ports to a system. Each device port supports 1 device, up to 8 power units Motor wiring distance up to 240 ft per motor port. Somfy requires the use of the SDN Low-voltage Motor Power and Data Cable, available in both
Plenum (US: 9020127, Canada: 9020453) and Non-Plenum (US: 9020126, Canada: 9020452) versions from Somfy. Maximum 200 ft. per isolated device port.
NOTE: Provides power to SDN Device Ports from internal power supplies. Consumes power from internal power supplies. (Bus Power is not needed if Bus In and Out ports are not used)
R TS
RTS Transmitter
M O
TO R
S B
U S
D IS
TR IB
U TIO
N U
S E
R IN
TE R
FA C
E S
SDN Low-voltage Motor Power and Data Cable
SDN Low-voltage Motor Power and Data Cable
Sonesse® 30 RS485 DCSonesse® 50 ULTRA RS485 DC Irismo™ 35 Mini DC
SD N Power Panel
Co py
rig ht
S om
fy S
ys te
m s,
In c.
8 /2
02 0
The Digital Electricity™ Receiver is a component in a Digital Electricity™(DE) line powering system. When paired with a Digital Electricity™(DE) transmitter unit, a Digital Electricity™(DE) system is formed (see diagram). If a person or foreign conductor comes in contact with the DE wiring, power is disconnected; preventing fire, equipment damage and personal injury. The safety features of the DE system allow it to be operated as an IEC-60950-21 compatible limited power source over standard multi-conductor cabling, without conduit, while conforming to the National Electric Code standards for building installations. This Receiver provides up to 3A at a nominal output voltage of 336VDC.
OVERVIEW:
Digital Electricity™ Receiver Item #: 1870520 (Included in Digital Electricity™ Power Panel for SDN)
DIGITAL ELECTRICITY™ (DE) OVERVIEW: Digital Electricity™ is a Limited Power Source which allows it to utilize standard 12-18AWG multi-conductor cabling, without conduit, while conforming to the National Electric Code standards for building installations (NOTE: Always follow local codes). The Digital Electricity™ Range are listed products, certified to safety and EMC standards by a Nationally Recognized Test Laboratory.
FEATURES SUMMARY: Safe to the touch electrical distribution Extend power distribution to 1,000 ft. per output port
*Max distance is dependent on the installation and gauge of the cabling used between the Transmitter and Receiver.
Use 12-18 AWG cable to distribute power The Digital Electricity™ Receiver is designed into the Digital Electricity Power Panel for SDN (1870628) The Digital Electricity Receiver features over and under voltage, over-current, short circuit and over-temperature protection Features a compact design with mounting tabs that allow for easy installation within the Somfy Power Panel for SDN
TECHNICAL SPECIFICATIONS: Input Voltage: 310-350V (336V Nominal),
*Must be supplied by listed Digital Electricity™ Transmitter
• Number of Channels: 1 • Current Per Input Channel: 3A MAX • Input Wire Gauge: 12-18AWG *Factory installed cable whips are 18AWG
• Input Cable Diameter: 0.105”-0.315” (2.7mm-8.0mm) (includes insulation) Output Voltage: 315-350 V (336 V Nominal) - Digital Electricity™
• Number of output channels: 1 • Current: 3.0A Max • Efficiency @ max load: 96% - AE to DE Conversion Efficiency • Continuous Operating Output Power 1000 W • Max Distance:(from Transmitter) 1,000 ft.
*Max distance is dependent on the installation and gauge of the cabling used between the Transmitter and Receiver.
Environment: • Operating Temperature: -4°F (-20°C) to 104°F (40°C) • Exposure Ratings: IP65 • Altitude: Up to 6,600 ft. (2000m) • Humidity: 5 to 95 %
Dimensions: 4.72” x 4.05” x 1.79” (120 x 103 x 45.5 mm) Weight: 1 lbs. (2.2 kg) Approvals:
• Safety: IEC 60950-1 NRTL SZAA (Bureau Veritas)
• Electro-magnetic compliance: CFR 47 FCC Part 15 Class A (USA) EN 55022 - Class A EN 55024
• Environmental: RoHS • General: CE
Normal Operation
Boot-up Start-up sequence occurs when power is first applied to the receiver.
Pre-charge DE Part of normal start-up sequence
Pre-charge Load Part of normal start-up sequence
FAULTS LED PATTERN FAULT CODE TROUBLESHOOTING LOAD CONNECTION 2 Blinks Connection problem between receiver output and load
Check receiver output polarity Check connections to load
OVERLOAD 3 Blinks Load Current too high Reduce Load Check wiring
TRANSMITTER 4 Blinks Transmitter Power Problem Check transmitter card(s) Check wiring from transmitter
TEMPERATURE 5 Blinks Receiver over temperature Reduce ambient temp surrounding receiver Reduce Load
SHORT CIRCUIT 6 Blinks Short Circuit detected between receiver and load Check wiring Check load for short circuit or ground fault
INTERNAL FAILURE 8 Blinks Internal hardware Failure Contact Voltserver
INDICATORS: (SEE LED WINDOW ON DRAWING IN DIMENSIONS)
Pin Color Description 1 White DE Input Neg (-) 2 Black DE Input Pos (+) 3 Green Not Used
Pin Color Description 1 White 336V Out Pos (+) 2 Black 336V Out Pos (+) 3 Green Ground
Pre-terminate input cable whip pin-out Pre-terminate output cable whip pin-outInput Connection to Digital Electricity Transmitter: Output Connection to Power Panel for SDN:
Negative (-)
Positive (+)
Green = ground
BEST WIRING PRACTICES: The diagram shown below is meant for illustrative purposes to show the connections from product to product. This device could be used in other configurations than shown below. For specification information on individual products see related product information. Follow all SDN wiring standards for distance limitations.
Each Digital Electricity Transmitter adds 8 isolated power ports to operate a Digital Electricity Power Panel for SDN (1870628) in a system. - Only one Digital Electricity Receiver can be connected to each DE Output Port on the Digital Electricity Transmitter
Digital Electricity wiring distance up to 1,000 ft. per port between Digital Electricity Transmitter and Digital Electricity Receiver using 12-18 AWG 2 conductor cable. *Max distance is dependent on the installation and gauge of the cabling used between the Transmitter and Receiver.
Important: Refer to product specification sheet for use of the Power Panel for SDN (1870628)
4.72" [120mm]
RoHS IP65
HAZARDOUS VOLTAGE2.56"
[65mm] 3.78"
1.79" [45mm]
4.72" [120mm]
2.56" [65mm]
3.78" [96mm]
1.79" [45mm]
LED WINDOW
P O
W E
R D
IS TR
IB U
TI O
SDN Low-voltage Motor Power and Data Cable
SDN Low-voltage Motor Power and Data Cable
Sonesse® 30 RS485 DCSonesse® 50 ULTRA RS485 DC Irismo™ 35 Mini DC
SDN Ir is
SD N Power Panel
SDN Low-voltage Motor Power and Data Cable
SDN Low-voltage Motor Power and Data Cable
Sonesse® 30 RS485 DCSonesse® 50 ULTRA RS485 DC Irismo™ 35 Mini DC
SD N Power Panel
Co py
rig ht
S om
fy S
ys te
m s,
In c.
8 /2
02 0