digital automatic air compressor - easylife · pdf filedigital automatic air compressor...

2
Digital Automatic Air Compressor INSTRUCTION MANUAL Model No. EL2919 Please read carefully before use and keep for future reference Imported and distributed by Easylife Group Ltd, London NW1 0JP Customer service: 0871 855 6100 For more innovative products from Easylife please visit: www.easylifegroup.com IN2919 © 2012 Easylife Group Ltd Customer service: 0871 855 6100 For more innovative products from Easylife please visit: www.easylifegroup.com PANTONE 072 C PANTONE 123 C IMPORTANT SAFETY INSTRUCTIONS When using the Digital Automatic Air Compresor, basic precautions should always be followed, which include the following: 1. Read all the instructions and keep for reference. 2. Compressor: Use 12 Volt DC only. Make sure that your vehicle’s cigarette lighter socket is free of any ash, residue or debris as any obstruction can cause the compressor and power cord to overheat. Overheating can cause damage to your compressor/vehicle and could cause bodily harm or injury. (Disconnect power when not in use). 3. The Digital Automatic Air Compressor is designed to inflate car tyres, bike tyres, ATV tyres, sports equipment, air mattresses, beach toys and other inflatables. Do not use for any other purpose other than inflating as bodily harm or personal injury can occur. 4. Do not operate the compressor for more than 10 minutes continuously. Allow compressor to cool down for 10 minutes before re-using. 5. Turn off power swich after use. 6. The compressor is not a toy. Keep away from children at all times. 7. Do not carry compressor by the air hose or power cord as damage my occur. 8. Do not leave the compressor unattended while in operation. 9. Do not over inflate. Be sure to follow the manufacturers instructions for the item you are inflating. 10. Keep the compressor away from flammable areas/liquids at all times. 11. Do not operate the compressor in wet or damp areas. 12. Operate the compressor only with the accessories that are included. DISPOSAL Please respect the environment! Dispose of the packaging according to the local recycling regulations. Dispose of paper and cardboard packaging separately from plastic bags into the corresponding containers. Dispose of the appliance at the end of its life span according to environmental considerations. WARNING The Digital Automatic Air Compressor operates on 12 Volt DC only. Do not attempt to operate the Digital Automatic Air Compressor with any other source or voltage. Do not rewire or reconfigure the Digital Automatic Air Compressor from it’s original design or personal injury or bodily harm may occur. TECHNICAL SPECIFICATION Operates on 12 Volt DC only. Measurements: L22xW14xD5cm Paper weight 60gsm Automatically inflates to the correct pressure, then stops

Upload: buiphuc

Post on 12-Mar-2018

223 views

Category:

Documents


2 download

TRANSCRIPT

Page 1: Digital Automatic Air Compressor - Easylife · PDF fileDigital Automatic Air Compressor INSTRUCTION MANUAL Model No. EL2919 Imported and distributed by Easylife Group Ltd, London

Digital Automatic Air Compressor INSTRUCTION MANUAL

Model No. EL2919

Please read carefully before use and keep for future referenceImported and distributed by Easylife Group Ltd, London NW1 0JP Customer service: 0871 855 6100For more innovative products from Easylife please visit: www.easylifegroup.com

IN2919 © 2012 Easylife Group LtdCustomer service: 0871 855 6100

For more innovative products from Easylife please visit: www.easylifegroup.com

PANTONE 072 CPANTONE 123 C

IMPORTANT SAFETY INSTRUCTIONSWhen using the Digital Automatic Air Compresor, basic precautions should always be followed, which include the following:

1. Read all the instructions and keep for reference.2. Compressor: Use 12 Volt DC only. Make sure that your vehicle’s cigarette lighter socket is free

of any ash, residue or debris as any obstruction can cause the compressor and power cord to overheat. Overheating can cause damage to your compressor/vehicle and could cause bodily harm or injury. (Disconnect power when not in use).

3. The Digital Automatic Air Compressor is designed to inflate car tyres, bike tyres, ATV tyres, sports equipment, air mattresses, beach toys and other inflatables. Do not use for any other purpose other than inflating as bodily harm or personal injury can occur.

4. Do not operate the compressor for more than 10 minutes continuously. Allow compressor to cool down for 10 minutes before re-using.

5. Turn off power swich after use.6. The compressor is not a toy. Keep away from children at all times.7. Do not carry compressor by the air hose or power cord as damage my occur.8. Do not leave the compressor unattended while in operation.9. Do not over inflate. Be sure to follow the manufacturers instructions for the item you are inflating.10. Keep the compressor away from flammable areas/liquids at all times.11. Do not operate the compressor in wet or damp areas.12. Operate the compressor only with the accessories that are included.

DISPOSAL• Please respect the environment! • Dispose of the packaging according to the local recycling regulations. • Dispose of paper and cardboard packaging separately from plastic bags into the corresponding

containers. • Dispose of the appliance at the end of its life span according to environmental considerations.

WARNINGThe Digital Automatic Air Compressor operates on 12 Volt DC only. Do not attempt to operate the Digital Automatic Air Compressor with any other source or voltage. Do not rewire or reconfigure the Digital Automatic Air Compressor from it’s original design or personal injury or bodily harm may occur.

TECHNICAL SPECIFICATIONOperates on 12 Volt DC only. Measurements: L22xW14xD5cm

Paper weight 60gsm

Automatically inflates to the correct pressure,

then stops

Page 2: Digital Automatic Air Compressor - Easylife · PDF fileDigital Automatic Air Compressor INSTRUCTION MANUAL Model No. EL2919 Imported and distributed by Easylife Group Ltd, London

PANTONE 072 CPANTONE 123 C

Customer service: 0871 855 6100For more innovative products from Easylife please visit: www.easylifegroup.com

Dear CustomerThank you for purchasing the Digital Automatic Air Compressor.

Take the guesswork out of inflating your tyres with this high-power digital tyre compressor. It automatically inflates and then stops when the correct pressure is reached. Simply pre-set the required pressure with the digital touch control, connect to your car cigarette socket, and then connect the hose to your tyre valve. Its high-speed pump inflates all types of tyres in half the time of many standard mini-compressors. With a long-reach 12ft power cord it’s complete with adaptors for inflating airbeds and footballs. Easy to store, it measures a compact L22xW14xD5cm.

BEFORE USEYour new Digital Automatic Air Compressor is capable of reading air pressure in the following formats; PSI, BAR, KG/CM2 and KPA. The gauge is defaulted at the factory in PSI mode. If you desire to change output mode form PSI to one of the other modes do the following:1. Press ‘Reset/On’ to switch on the gauge. Wait approximately 2 seconds for the

gauge LCD display to read 0.0. 2. Hold down ‘Reset/On’ for 3 seconds until the display flashes.

WARNING: Please do this only when the air hose is not connected to the tyre as this will cause an incorrect reading.

3. Press ‘Reset/On’ repeatedly to select desired unit of measurement: PSI, BAR, KG/CM2 or KPA.4. After selecting the mode, the gauge will reset in the mode selected and will show the output mode in

small letters at the top of the LCD display. (PSI, BAR, KG/CM2 or KPA).5. When pumping, there is approximately 1 to 2 PSI difference between your tyre pressure and the

display figure due to the air hose back pressure.6. The digital gauge display will be subject to fluctuation while pumping.7. The digital gauge will automatically shut off in 15 seconds when the pressure is under 3 PSI.

OPERATIONThe Digital Automatic Air Compressor is equipped with a digital tyre pressure gauge. The pressure gauge can:A. Be used to monitor air pressure when inflating tyres and other items.B. Shut off the compressor automatically to the desired pressure of tyres and other items.

PARTS DESCRIPTIONItem # Name 1. 12 Volt Plug 2. Valve/Tyre Chuck 3. Compressor Power Switch 4. Pressure Gauge 5. Mattress Adaptor 6. Ball Adaptor

I : PRESET O : OFF II : NORMAL

OPERATION (continued)A. TO OPERATE COMPRESSOR/GAUGE WITHOUT PRESET FUNCTION:1. Connect the 12 Volt plug (1) into vehicles cigarette lighter socket.2. If you wish to switch the unit of pressure measured, follow steps 1 to 4 in the ‘BEFORE USE’

section opposite.3. Connect the valve/tyre chuck (2) to tyre air valve and push down the valve lock lever (2) to secure

the connection.4. Press ‘Reset/On’ once to switch on the gauge (4). The gauge will display the current pressure

(pressure reading tolerance + or - 3P.S.I.)5. Press the Compressor Power Switch (3) to ‘Normal’ position and the compressor will begin to

operate. Inflate your tyre or desired item to the correct pressure and shut off the compressor by pressing the Compressor Power Switch (3) to the ‘Off’ position. Caution: Do Not Over Inflate!

6. Disconnect the Valve Lock (2) from the tyre and the 12 Volt plug (1) from the cigarette lighter socket.

B. TO OPERATE COMPRESSOR/GAUGE USING THE PRESET AUTOMATIC SHUT OFF FEATURE:1. Connect the 12 Volt plug (1) into vehicles cigarette lighter socket.2. If you wish to switch the unit of pressure measured, follow steps 1 to 4 in the ‘BEFORE USE’

section opposite.3. The gauge is pre-set at the factory to 30 PSI. This means the compressor will automatically shut

off when it reaches 30 PSI. Press the ‘+’ or ‘-’ to change the shut off pressure setting to the desired automatic shut off pressure (Maximum 100PSI). To return to the default setting of 30PSI hold down the ‘Reset/On’ button for 3 seconds, please do this only when the air hose is not connected to the tyre as this will cause an incorrect reading.

4. Connect the valve/tyre chuck (2) to tyre air valve and push down the valve lock lever (2) to secure the connection.

5. Press ‘Reset/On’ once to switch on the gauge (4). The gauge will display the current tyre pressure (pressure reading tolerance + or - 3P.S.I. at 30P.S.I.)

6. For automatic shut off, press the Compressor Power Switch (3) to ‘Preset’. In the ‘Preset’ mode the compressor will automatically shut off when it reaches the preset pressure setting.

7. Press the Compressor Power Switch (3) to the ‘Off’ position when you are finished. Caution: Do Not Over Inflate!

8. Disconnect the Valve Lock (2) from the tyre and the 12 Volt plug (1) from the cigarette lighter socket.

C. To inflate sport equipment:Ball:1. Insert the Ball Adaptor (6) into the valve/tyre chuck (2) and push down the valve lock lever (2) to

secure connection.2. Press adaptor’s needle (6) into ball carefully.3. Follow compressor operation steps A.Bicycle Tyre:1. Connect valve/tyre chuck (2) to bicycle tyre air valve and push down the valve lock lever (2) to

secure connection.2. Follow compressor operation steps A.Mattress/Raft:1. Insert the Mattress Adaptor (5) into the valve/tyre chuck (2) and push down the valve lock lever (2)

to secure connection.2. Press adaptor’s needle (6) into mattress/raft carefully.3. Follow compressor operation steps A.

Automatically inflates to

the desired pressure

Paper weight 60gsm

1

34

5

6

2