digital audio broadcasting - digital audio broadcasting 3rd.pdf7.2.1 difference between fm and dab...
TRANSCRIPT
![Page 1: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/1.jpg)
![Page 2: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/2.jpg)
Digital Audio Broadcasting
Digital Audio Broadcasting: Principles and Applications of DAB, DAB+ and DMB, Third Edition Edited by W. Hoeg and T. Lauterbach© 2009 John Wiley & Sons, Ltd. ISBN: 978-0-470-51037-7
![Page 3: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/3.jpg)
Digital AudioBroadcasting
Principles and Applicationsof DAB, DAB+ and DMB
THIRD EDITION
Editors
WOLFGANG HOEG
Audio Consultant, Berlin, Germany
and
THOMAS LAUTERBACH
Georg-Simon-Ohm, University of Applied Sciences, Nurnberg, Germany
A John Wiley and Sons, Ltd, Publication
![Page 4: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/4.jpg)
This edition first published 2009
� 2009 John Wiley & Sons Ltd.
Registered office
John Wiley & Sons Ltd, The Atrium, Southern Gate, Chichester, West Sussex, PO19 8SQ, United Kingdom
For details of our global editorial offices, for customer services and for information about how to apply for
permission to reuse the copyright material in this book please see our website at www.wiley.com.
The right of the author to be identified as the author of this work has been asserted in accordance
with the Copyright, Designs and Patents Act 1988.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted,
in any form or by anymeans, electronic, mechanical, photocopying, recording or otherwise, except as permitted
by the UK Copyright, Designs and Patents Act 1988, without the prior permission of the publisher.
Wiley also publishes its books in a variety of electronic formats. Some content that appears in print
may not be available in electronic books.
Designations used by companies to distinguish their products are often claimed as trademarks. All brand names
and product names used in this book are trade names, service marks, trademarks or registered trademarks of
their respective owners. The publisher is not associated with any product or vendor mentioned in this book.
This publication is designed to provide accurate and authoritative information in regard to the subject matter
covered. It is sold on the understanding that the publisher is not engaged in rendering professional services.
If professional advice or other expert assistance is required, the services of a competent professional should
be sought.
The authors and publishers would like to acknowledge the European Telecommunications Standards Institute
(ETSI) for granting permission to reproduce figures and tables from the four ETSI Standards referred to in the
book
ETSI EN 300401 V1.4.1 � ETSI 2006
ETSI EN 300797 V1.2.1 � ETSI 2005
ETSI TS 101 860 V1.1.1 � ETSI 2001
ETSI TR 101 497 V1.1.1 � ETSI 2002
� ETSI, Further use, modification, redistribution is strictly prohibited. The standards are available from
[email protected] and http://www.etsi.org/eds/eds.html
Library of Congress Cataloging-in-Publication Data
Digital audio broadcasting : principles and applications of DAB, DABþ and DMB/ edited by
Wolfgang Hoeg, Thomas Lauterbach. — 3rd ed.
p. cm.
Includes bibliographical references and index.
ISBN 978-0-470-51037-7 (cloth)
1. Digital audio broadcasting. I. Hoeg, Wolfgang. II. Lauterbach, Thomas.
TK6562.D54D54 2009
621.384—dc22
2009001879
A catalogue record for this book is available from the British Library.
ISBN 978-0-470-51037-7 (Hbk)
Set in 10/12pt Times by Integra Software Services Pvt. Ltd., Pondicherry, India
Printed and bound in Great Britain by Antony Rowe Ltd, Chippenham, Wiltshire.
![Page 5: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/5.jpg)
Contents
List of Contributors xiii
Preface xix
Foreword xxiii
Abbreviations xxv
1 Introduction 11.1 General 11.2 Radio in the Digital Age 21.3 Benefits of the Eureka 147 DAB Systems Family 2
1.3.1 The Original DAB System 21.3.2 Benefits of the Upgraded System DAB+ 5
1.4 History of the Origins of DAB 51.4.1 Steps of Development 51.4.2 Organisations and Platforms 101.4.3 Milestones of Introduction 12
1.5 International Standardisation 131.5.1 Basic Requirements and System Standards 131.5.2 Audio Coding 131.5.3 Data and Multimedia Services 141.5.4 Network and Transmission Standards 141.5.5 Receiver Requirements 151.5.6 Guidelines for Implementation and Operation 15
1.6 Relations to Other Digital Broadcasting Systems 151.6.1 Satellite-based Digital Radio Systems 151.6.2 Terrestrial Digital Broadcasting Systems 191.6.3 Digital Radio Mondiale (DRM) 231.6.4 Internet Radio (Web-casting) 25
![Page 6: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/6.jpg)
2 System Concept 292.1 The Physical Channel 292.2 The DAB Transmission System 32
2.2.1 Multicarrier Modulation 322.2.2 The Frame Structure of DAB 352.2.3 Channel Coding 362.2.4 Interleaving and PSK Mapping 422.2.5 Time Interleaving and Overall Delay 422.2.6 DQPSK Modulation and Frequency Interleaving 442.2.7 Performance Considerations 44
2.3 The DAB Multiplex 472.3.1 Mode-Independent Description of the Multiplex 472.3.2 The Main Service Channel 482.3.3 Transport Mechanisms 482.3.4 Fast Information Channel (FIC) 552.3.5 Transmission Frames 562.3.6 The Logical Structure of the DAB Multiplex 562.3.7 Multiplex Reconfiguration 57
2.4 Conditional Access 582.4.1 General Principles 582.4.2 System Architecture of HECA (Fraunhofer-IIS) 622.4.3 Conditional Access Framework for DAB 63
2.5 Service Information 662.5.1 Introduction 662.5.2 Coding of Labels 662.5.3 Basic Service Information 682.5.4 Service-related Information 702.5.5 Programme-related Features 742.5.6 Announcements 772.5.7 Other Ensemble Services 822.5.8 Tuning Aids 83
3 Audio Services and Applications 933.1 General 933.2 Audio Coding and Decoding 94
3.2.1 Perceptual Coding 943.2.2 MPEG-1/2 Audio Layer II 963.2.3 MPEG-2/4 HE AAC 1013.2.4 Spectral Band Replication (SBR) 1073.2.5 Parametric Stereo Coding (PS) 1093.2.6 Audio Decoding 112
3.3 Characteristics of DAB Audio Coding 1133.3.1 Audio Modes 1143.3.2 Sampling Rate 1143.3.3 Frame Structure 1153.3.4 Bit Rates 115
vi Contents
![Page 7: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/7.jpg)
3.4 DAB+ Coding Schemes 1163.4.1 Is Audio Layer II Still Up-to-date for DAB? 1163.4.2 DAB+ Audio Coding 117
3.5 Programme-associated Data 1203.5.1 Dynamic Range Control (DRC) 1213.5.2 Music/Speech Control (M/S) 1223.5.3 Transport Mechanism of DRC and M/S Data 1223.5.4 The Receiving End 123
3.6 Multichannel Audio with DAB 1243.6.1 Characteristics of the MPEG-2 Multichannel Audio Coding
System 1243.6.2 3/2-Multichannel Presentation Performance 1263.6.3 Compatibility Aspects 1283.6.4 MPEG Surround for HE AAC 130
3.7 Other Advanced Audio Applications 1343.7.1 Multilingual Extension 1343.7.2 Half Sampling Rate Coding 1353.7.3 Audio Broadcasting for the Hearing Impaired 136
3.8 Quality of Service 1393.8.1 Analogue vs Digital Transmission 1403.8.2 Audio Quality vs Bit Rate 1413.8.3 Subjective Quality Assessment 1423.8.4 Subjective Tests for AAC Codec Family 1453.8.5 Error Protection and Concealment 1503.8.6 Objective Quality Assessment 158
3.9 Audio Levels 1603.9.1 Audio Signal Level Alignment 1603.9.2 Programme Loudness 164
4 Data Services and Applications 1674.1 General 1674.2 Data Application Signalling and Access 1674.3 The Multimedia Object Transfer Protocol 170
4.3.1 General Principles 1704.3.2 Structure of MOT 1704.3.3 Transmission of MOT and Overhead Considerations 1714.3.4 MOT Header Parameters 1744.3.5 Advanced Features of the MOT Directory Mode 175
4.4 Standardised MOT User Applications 1754.4.1 MOT Slideshow 1754.4.2 MOT Broadcast Web Site 1764.4.3 Electronic Programme Guide (EPG) 177
4.5 Text Based Services 1774.5.1 Dynamic Label 1774.5.2 Journaline 179
Contents vii
![Page 8: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/8.jpg)
4.6 Traffic Information Services and Navigation Aids 1874.6.1 Traffic Message Channel (TMC) 1874.6.2 TPEG 1884.6.3 Differential GPS 188
4.7 Other Data Transmission Mechanisms 1894.7.1 Transparent Data Channel 1894.7.2 IP-Tunnelling 190
5 Provision of Services 1935.1 The DAB Service Landscape 193
5.1.1 Structure of DAB Service Organisation 1935.1.2 DAB Main Services 1955.1.3 Data Services 198
5.2 Use of Existing Infrastructures 2005.2.1 Broadcasting Operation Systems 2005.2.2 Editorial Systems 201
5.3 Need for New Infrastructure 2025.3.1 Management of Text and Service Data 2025.3.2 Multimedia Editorial Tools 2055.3.3 Data Inserter 207
5.4 Relationship between DAB Data Servicesand RDS 2105.4.1 DAB SId versus RDS PI Code 2105.4.2 Programme Type Codes 2115.4.3 Announcements in DAB versus TA in RDS 2115.4.4 Dynamic Label in DAB versus Radiotext in RDS 2115.4.5 Cross-referencing DAB Services from RDS 216
5.5 Electronic Programme Guide (EPG) for DAB 2205.5.1 General 2205.5.2 Development of the DAB EPG 2215.5.3 Data formatting 2215.5.4 Transportation and Compression of the EPG 2245.5.5 EPG Data Management 2275.5.6 Launch of EPG services 228
5.6 Possible New Audio Services 2285.6.1 Dynamic Reconfiguration for Temporary Service Splitting 2285.6.2 Secondary Service Components for Main and Sub-Services 2285.6.3 Announcement Channels for a ‘‘Near Radio on Demand’’ 2295.6.4 Announcement Switching for Personal Preferences 2295.6.5 Mailbox Radio 229
6 Collection and Distribution Networks 2316.1 General 231
6.1.1 Basic Requirements 2316.1.2 Ensemble Multiplexer 2336.1.3 Conceptual Broadcast Network Outline 2356.1.4 Implementation Issues 235
viii Contents
![Page 9: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/9.jpg)
6.2 The Collection Network 2376.2.1 The Service Transport Interface (STI) 2376.2.2 Network Architecture 2426.2.3 Network Operation 2446.2.4 STI Implementation Levels 2486.2.5 Integration of Non-STI Service Providers 2506.2.6 Advanced Features and Further
Development 2516.3 The Distribution Network 251
6.3.1 The Ensemble Transport Interface (ETI) 2516.3.2 Network Architecture 2536.3.3 Network Operation 254
6.4 Example of Implementation 2566.4.1 Operational Scenario 2566.4.2 The Service Provider Profile 2576.4.3 Equipment in Use 258
7 The Broadcast Side 2637.1 General 2637.2 Introduction to DAB Networks 263
7.2.1 Difference between FM and DAB Networks 2637.2.2 Single Frequency Networks 264
7.3 Particularities of Single Frequency Networks (SFNs) 2677.3.1 Review of COFDM Principles 2677.3.2 Time and Frequency Synchronisation 2677.3.3 Network Gain 2677.3.4 Self-Interference in DAB Networks 2687.3.5 Optimised Coverage of SFNs 2687.3.6 Closure of Coverage Gaps Using Gap Fillers 2697.3.7 Application of the TII Feature in SFNs 271
7.4 DAB Transmitters 2727.4.1 General Aspects 2727.4.2 Signal Processing Blocks of a COFDM Modulator 2737.4.3 Digital-to-analogue Conversion 2747.4.4 RF Upconversion 2767.4.5 Amplification and Filtering 276
7.5 Radio Frequency Propagation Aspects 2787.5.1 The Impaired RF Channel 2787.5.2 Propagation and Channel Models 282
7.6 Coverage Planning 2887.6.1 Reception Modes 2887.6.2 Planning Criteria 2897.6.3 Interference Considerations 2937.6.4 Delay Considerations 2957.6.5 Coverage Prediction 2987.6.6 Further Planning Considerations 299
Contents ix
![Page 10: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/10.jpg)
7.6.7 Example of an SFN in Band III 3007.6.8 Example of an SFN in L-Band 301
7.7 Coverage Evaluation and Monitoring of SFNs 3037.7.1 Parameters for DAB Coverage Evaluation 3037.7.2 A Closer Look at Bit Error Ratio Measurements 3057.7.3 Timing Adjustment of SFNs 3077.7.4 Monitoring of SFNs 307
7.8 Frequency Management 3077.8.1 General Aspects 3077.8.2 The Frequency Planning Conferences for DAB in Europe 3097.8.3 The Frequency Plan for DAB in Canada 3107.8.4 Allocation of Frequencies and Practice of Coordination 311
8 The Receiving Side 3198.1 General 319
8.1.1 Normative Receiver Requirements 3208.1.2 Discussion of the Minimum Receiver Requirements 3218.1.3 Receiver Architecture Overview 323
8.2 RF Front-end 3248.2.1 Requirements 3248.2.2 Analogue Front-end Concepts and Architectures 3298.2.3 Trends and Future Developments 333
8.3 Digital Baseband Processing 3348.3.1 Digital Front-end 3348.3.2 OFDM Demodulation 3358.3.3 DQPSK Demodulation 3368.3.4 Deinterleaving 3378.3.5 Viterbi Decoding 3388.3.6 Synchronisation 338
8.4 Audio Decoder 3398.4.1 Layer II Audio Decoder Architecture 3408.4.2 Reed-Solomon Decoding and Virtual Deinterleaving 3408.4.3 AAC Audio Decoder Architecture 3428.4.4 Normative Requirements 343
8.5 Interfaces 3448.6 Integrated Circuits for DAB 345
8.6.1 Overview of DAB Chip-sets 3458.6.2 History of DAB Chip-sets – the JESSI Programme 3468.6.3 D-FIRE Chip-set (Bosch) 348
8.7 Receiver Overview 3548.7.1 History of Receiver Development 3558.7.2 Receiver Categories 3558.7.3 Receiver Market 356
8.8 Receiver Features 3578.8.1 General Aspects 357
x Contents
![Page 11: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/11.jpg)
8.8.2 Examples of Receiver Features 3588.8.3 Future Trends 360
9 Mobile Television and Multimedia 3639.1 Overview 363
9.1.1 History and Requirements 3639.1.2 Situation of Mobile TV in Different Parts of the World 3659.1.3 Spectrum Resources 3659.1.4 Integration of Mobile TV Services in DAB/DAB+ Radio
Ensembles 3669.1.5 Transport Mechanisms with Improved Robustness 3679.1.6 The MPEG-2 Transport Stream 3679.1.7 Commonalities of DAB-DMB and DAB-IPDC 369
9.2 DAB-DMB 3699.2.1 Overview 3699.2.2 Transport 3709.2.3 PSI/SI Signalling 3719.2.4 DMB-Radio 3729.2.5 Overhead of Low Rate Applications 3729.2.6 DMB Implementations 374
9.3 DAB-IPDC 3749.3.1 Overview 3749.3.2 Transport 3759.3.3 PSI/SI Signalling 3779.3.4 Application ‘Mobile TV’ 378
9.4 Application Standardisation 3809.5 Conclusions 380
Appendix 1 DAB Parameters for Modes I, II, III and IV 383
Appendix 2 Frequencies for Terrestrial and Satellite DAB Transmission 387
Appendix 3 DAB System Protocol Stack 393
Bibliography 395
Index 413
Contents xi
![Page 12: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/12.jpg)
List of Contributors
Editors
Wolfgang Hoeg, Dipl.-Ing., AES Fellow, Berlin, Germany, graduated from theUniversity of Technology, Dresden, in electrical engineering and joined the RFZ(Research and Development Centre of Deutsche Post) in 1959. Since 1991 he has beenwith Deutsche Telekom, and became head of the audio systems division with DeutscheTelekom’s research company Berkom, Berlin. He has worked in various fields of audioengineering, such as psycho-acoustics, two-channel and multi-channel audio, DAB andother new broadcast technologies. As a member of the standardisation bodies of OIRT,ITU-R and EBU, he was acting as chairman of several project groups. He also con-tributed to Eureka 147/DAB Working Groups and chaired the Task group DRC. Afterretiring from Deutsche Telekom in 1999, he became an audio consultant. He edited orcontributed to several expert books in the field of audio and communications technology.(Contributed to all of the editions, Chapters 1, 3 and 5)
Thomas Lauterbach, Prof. Dr. rer. nat., Nurnberg, Germany, received his Diplom-Physiker degree and PhD from Erlangen University. In 1992 he joined Robert BoschGmbH, where he became involved with the development of DAB. In 1997 he becamehead of a multimedia systems development department. He was with several Eureka 147/DAB Working Groups, the German DAB platform and Euro-DAB/WorldDAB andcontributed to ETSI. He also coordinated theMEMO (ACTS) project. Since 1997 he hasbeen with Georg-Simon-Ohm-Hochschule Nurnberg – University of Applied Sciences asa Professor of Physics. He is currently involved in the Digital Radio Mondiale (DRM)project. In 1996 he edited one of the first books on DAB in German. (Contributed to allof the editions, Chapters 1, 2, 4 and 7)
Contributors
Stephen Baily, MA (Cantab), London, United Kingdom, joined the British BroadcastingCorporation in 1985. For the last few years he has worked for BBC Research andDevelopment on various aspects of digital broadcasting, with a particular focus on thetransmission aspects. He has designed experimental and operational transmission
![Page 13: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/13.jpg)
equipment for DAB, and has also worked in the areas of satellite delivery, spectrumplanning and the design of broadcast systems. He has been a contributor to severalEureka 147/DAB Working Groups, Task Forces and the Executive Committee.(Contributed to the 2nd edition, Chapter 7)
Birgit Bartel-Kurz, Dipl.-Math., Erlangen, Germany, studied mathematics at Universityof Applied Science, Darmstadt and at University of Namur and earned her degree in1987. She worked for Robert Bosch GmbH in the telecommunications sector andlectured at the University of Cooperative Education, Mannheim. Currently Birgit iswith the Fraunhofer Institute for Integrated Circuits IIS, working in the area of digitalbroadcast applications and multimedia security technologies. Birgit was engaged inseveral technical working groups of WorldDMB. There she chaired the Task ForceConditional Access Framework. (Contributed to the 3rd edition, Chapter 2)
Michael Bolle, Dr.-Ing., Hildesheim, Germany, received his Dr.-Ing. degree with honorsfrom Ruhr-Universitat Bochum. In 1992 he joined Robert Bosch GmbH, working in thefield of DAB receiver development. Since 1997 he has been Head of the Department‘Advanced Development Multimedia Systems’, in which the Bosch DAB VLSI projecttook place. Michael Bolle left Bosch in 1999, and was co-founder and executive VP ofengineering of Systemonic AG in Dresden. In 2002 he returned to Robert Bosch GmbH,and is now with Bosch Car Multimedia. He holds more than 10 patents in the field ofDAB receiver technology. (Contributed to the 1st and 2nd editions, Chapter 8)
Thomas Boltze, Dr.-Ing., AES, SMPTE and IEEE, Philips Research Shanghai, receivedhis PhD in electrical engineering from the University of Technology Hamburg. In 1995he joined the Advanced Systems and Applications Lab of Philips Consumer Electro-nicsin The Netherlands, where he developed audio compression systems as Senior SystemsDesigner and contributed to ITU, Eureka 147/DAB and the DVB project. At VisibleWorld, New York, he was dealing with systems architectures for DTV. He is currently aPrincipal Scientist with Philips Research in Shanghai, taking care of DTV platforms andapplications. (Contributed to the 1st and 2nd editions, Chapter 3)
Roland Brugger, Dr. rer. nat., Munchen, Germany, received his Diplom-Physiker degreeand PhD from Ludwig-Maximilians-Universitat, Munchen. In 1987 he joined theInstitut fur Rundfunktechnik (IRT). Since 1992 he has been deeply involved in theplanning and development of digital terrestrial broadcasting (T-DAB and DVB-T).He participated in the international planning conferences since 1995 up to 2004/2006,for which he contributed to the development of planningmethods. Since 2004 he has beenhead of the frequency planning section of IRT. At present he is involved in the imple-mentation of the GE06 frequency plan for digital terrestrial broadcasting. (Contributedto the 3rd edition, Chapter 7)
Gerald Chouinard, P.Eng., Ottawa, Canada, graduated in electrical engineering from theUniversity of Sherbrooke, Canada. He started his engineering career at CBC in the fieldof international technical relations related to the planning of Broadcasting SatelliteService (BSS). He later joined the Communications Research Centre (CRC), where he
xiv List of Contributors
![Page 14: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/14.jpg)
worked on technical and spectrum-orbit utilisation studies related to BSS. He laterbecame Director, Radio Broadcast Technologies Research. His current position ismanager of the Rural and Remote Broadband Access Program at CRC. (Contributedto the 2nd edition, Chapter 7)
Detlef Clawin, Dr.-Ing., Pacifica,USA, received hisDr.-Ing. degree fromRuhr-UniversitatBochum.Heworked in the fields of high speed circuit design for fibre optics andRFICs forDAB receivers at Bell Communications Research in Redbank, NJ, USA, and in Germanyat Fraunhofer-Gesellschaft IMS in Duisburg, MICRAM Microelectronics in Bochum,and Robert Bosch GmbH, Corporate Research in Hildesheim, responsible for the devel-opment for a single chip DAB tuner IC. Presently, he is with NXP. (Contributed to the 1st
and 2nd editions, Chapter 8)
Bernhard Feiten, Dr.-Ing., AES, Berlin, Germany, received his doctor degree in electro-nics at the TechnischeUniversitat Berlin in the field of psycho-acoustic and audio bit-ratereduction. He worked as an assistant professor at the Technische Universitat Berlin incommunication science. Since 1996 he has been with Deutsche Telekom. At the researchcompany T-NovaDeutsche TelekomBerkom, he was head of the Audio systems divisionsince 1999, responsible for current research on DABmatters. He is a member of the ISO/MPEG Audio group. (Contributed to the 1st and 2nd editions, Chapter 4)
Neil H. C. Gilchrist, BSc, C.Eng., MIET, AES Fellow, Ashtead, United Kingdom, grad-uated from Manchester University in 1965 with a BSc honours degree in physics andelectronic engineering, and joined theBBCResearchDepartment.Heworkedonbroadcastaudio, including NICAM and digital audio broadcasting. Towards the end of his BBCcareer he became involved in a number of European RACE, Eureka 147/DAB and ACTSprojects, and in international standardisation with CCIR (ITU-R), AES and EBU groups.After retiring in 2002 he has become an audio consultant. He was President of the AudioEngineeringSociety (AES) in2005/2006. (Contributedto the2ndand3rdeditions,Chapter3)
Chris Gould, BMus (Tonmeister), London, United Kingdom, graduated from theUniversity of Surrey in 1994 with a BMus honours degree in Music and SoundRecording (Tonmeister). He joined the UBC Media Group in 1994, working within theaudio facilities company, Unique Facilities Limited. He has been actively involved withDAB Digital Radio since 1999, and chaired the DAB EPG Task force withinWorldDMB. Chris now runs his own digital radio technology company, All In Media,and is providing digital radio data technology to leading broadcasters across the world.(Contributed to the 2nd and 3rd editions, Chapter 5)
Frank Herrmann, Dipl.-Ing., Frankfurt, Germany, studied electrical engineering at theTechnical University of Braunschweig and then joined the European R&D centre ofClarion. In 1994 he led his company into the Eureka 147 DAB Project. In 1996 he changedto Panasonic R&D Europe and remained responsible for DAB. Frank chaired theWorldDAB/WorldDMB Technical Committee from 2004 to 2007 and received the Per-Erik-SelemarkAward in 2005. In 2006 he becamePanasonic’s EuropeanR&Dproject leaderfor the second generation of DVB. (Contributed to the 3rd edition, Chapters 2 and 9)
List of Contributors xv
![Page 15: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/15.jpg)
Frank Hofmann, Dr.-Ing., Hildesheim, Germany, received the Dipl.-Ing. degree in elec-trical engineering from the University of Karlsruhe and his PhD from the universityHanover, 2004. Since 1996 he has been with Robert Bosch GmbH, Corporate Research,Hildesheim. His main focus is in the field of digital radio system design as well as RF andbaseband receiver development. Currently he works as project manager. He leads thereceiver working group of the DRM consortium and is a member of its Steering Board.(Contributed to the 3rd edition, Chapter 8)
David Marston, B.Eng, Sussex, United Kingdom, graduated from the University ofBirmingham in 1994 with a B.Eng (honours) degree in electronic engineering. In 2000he joined the BBC Research and Development department. He has worked on variousareas of audio research including DAB, audio and speech coding, and subjective andobjective testing. He has also been a member of various audio related EBU groupsincludingD/DABA andD/MAE involved in the testing of the latest audio codec designs.(Contributed to the 3rd edition, Chapter 3)
Egon Meier-Engelen, Dipl.-Ing., Cologne, Germany, received his Dipl.-Ing. degreein communications engineering from the Technische Hochschule Aachen in 1963.Since then he has worked in R&D with different firms on various fields of communica-tions technologies. In 1985 he joined the German Aerospace Center (DLR), Cologne,where he headed a section managing research grants for information technology by theFederalMinistry for Education andResearch (BMBF). He directed the Eureka 147DABproject from 1986 to 1998. In 2001 he retired from DLR. (Contributed to the 1st edition,Chapter 1)
Torsten Mlasko, Dipl.-Ing., Pattensen, Germany, received the Dipl.-Ing. degree inelectrical engineering from the University of Hanover in 1995. Since 1995, he hasbeen with Robert Bosch GmbH, Department Advanced Development MultimediaSystems, Hildesheim, Germany. He is now with Bosch CarMultimedia. He was an activemember of Eureka 147 Working Group A and of the ISO/MPEG Audio group, and ispresently an active member of WorldDAB and DRM. (Contributed to the 1st and 3rd
editions, Chapter 8)
Hans-Jorg Nowottne, Dr.-Ing., Dresden, Germany, studied electrical engineering at theUniversity of Technology in Dresden, and worked for a long time in R&D in theelectronics industry, focused on computer-aided design. Since 1992 he has been withthe Fraunhofer-Institute of Integrated Circuits, Dresden. He has dealt with prototypedevelopment in the field of telecommunications and digital broadcasting (DAB, DVB)since 2001 as a head of department. In the Eureka 147/DAB project, he was involved inthe definition of the Service Transport Interface (STI) and was with Working Group B.Now he is retired. (Contributed to the 1st and 2nd editions, Chapter 6)
Roland Plankenbuhler, Dr.-Ing., Nurnberg, Germany, studied electrical engineering at theUniversity of Erlangen. After his Diploma Degree he worked there at the ‘Lab forTechnical Electronics’. Having obtained his PhD he joined Fraunhofer IIS-A in 1990,and became manager of the ‘Data Services’ group involved with DAB. Since 1997 he has
xvi List of Contributors
![Page 16: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/16.jpg)
managed the Department ‘Terminal Devices’, which is mainly focused on the definitionand implementation of data services and terminals. He is currently Head of the ‘ITServices’ department. He was a member of several working groups of Eureka 147/DAB,as well as WorldDAB Module A. (Contributed to the 1st and 2nd editions, Chapter 4)
Markus Prosch, Dipl.-Inf., Erlangen, Germany, studied computer sciences at theUniversity of Erlangen. In 1995 he joined the Fraunhofer Institute for IntegratedCircuits IIS. He is responsible for the development of the Fraunhofer DAB/DMBContentServer. Since 1996, he has been deeply involved in several DAB standards. Hechaired the WorldDMB task force MOT and the task force audio coding for DAB+. In2007, WorldDMB conferred the Per Erik Selemark Award for his services to DAB+.Starting in 2001, he has also been involved in the specification of Digital RadioMondiale(DRM) standards. (Contributed to the 3rd edition, Chapters 2 and 4)
Thomas Schierbaum, Munich, Germany, after technical education, he studied mediamarketing at the ‘Bayerische Akademie fur Werbung und Marketing’. He is with theInstitut fur Rundfunktechnik (IRT), working as a project manager for data service con-trolling and ancillary data transmission in DAB. Among other things, he was responsiblefor the infrastructure of the DAB-Program ‘Bayern Mobil’ of the Bayerischer Rundfunk,DAB product management and consulting. He is with several working groups of theGerman public broadcasters (ARD/ZDF). (Contributed to all of the editions, Chapter 5)
Henrik Schulze, Prof. Dr. rer. nat., Meschede, Germany, received the masters degree(Dipl.-Phys.) in 1983 and his PhD in 1987 from the University of Gottingen, Germany.From 1987 to 1993 he was with Robert Bosch GmbH at the Research Institute inHildesheim, where he worked on the development of modulation and channel codingfor the DAB system. Since 1993 he has been Professor for Communication Theory atFachhochschule Sudwestfalen – University of Applied Sciences, Division Meschede. Heis currently involved in the Digital Radio Mondiale (DRM) project. (Contributed to allof the editions, Chapters 1 and 2)
Ralf Schwalbe, Dipl.-Ing., Berlin, Germany, studied systems engineering at the TechnicalUniversity in Chemnitz, and joined the research and development centre RFZ ofDeutsche Post, Berlin. Since the 1990s he has been with Deutsche Telekom, and is nowat T-Systems, dealing with research and development for audio and data services withDAB and DMB. He was a member of several working groups of the Eureka 147/DABproject and is now with WorldDMB. (Contributed to the 1st and 2nd editions, Chapter 4)
Gerhard Stoll, Dipl.-Ing., AES Fellow, Munchen, Germany, studied electrical engineer-ing at the universities of Stuttgart and Munich. In 1984 he joined the Institut furRundfunktechnik (IRT), and became head of the psycho-acoustics and digital audiogroup. There he was responsible for the development of the MPEG-Audio Layer IIstandard. Mr Stoll was also a member of different international standardisation groups,such as MPEG, Eureka 147/DAB, DVB and EBU. As a senior engineer at the IRT, he isnow in charge of advanced multimedia broadcasting and information technology ser-vices. (Contributed to the 1st edition, Chapters 1 and 3)
List of Contributors xvii
![Page 17: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/17.jpg)
Wolfram Titze, Dr., C.Eng., MIEE, Berlin, Germany, graduated from Friedrich-Alexander University Erlangen and received his PhD in electronic engineering fromUniversity College London in 1993. He joined Robert Bosch GmbH, and later becamehead of the department multimedia systems development. He was with the Eureka147/DAB Executive Committee, worked on standardisation of DAB distribution interfacesat ETSI, and was vice chairman of the technical module of WorldDAB. He also workedas Eureka147 promotion engineer. Dr Titze is now head of amplifier systems with theBroadcasting Division of Rhode & Schwarz. (Contributed to all of the editions, Chapter7 and Appendix 2)
Lothar Tumpfel, Dipl.-Ing., Berlin, Germany, studied telecommunication engineering inLeipzig and information technology in Dresden. He worked for many years in the field ofthe development of studio audio equipment. Since the 1990s he has been with DeutscheTelekom, later at T-Nova Deutsche Telekom Berkom, dealing with research and develop-ment forDAB.Hewas amember of several working groups and of the SteeringCommitteeof Eureka 147/DAB, and contributed to the EBU Specialist Group V4/RSM. In 2001 heretired from Deutsche Telekom. (Contributed to the 1st and 2nd editions, Chapter 6)
HermanVan Velthoven†, Ing., AES, Antwerpen, Belgium, joined Pioneer Europe in 1973,where he became successivelyManager, Product Planning General Audio, andManager,Engineering Department. In 1996 he changed to Pioneer’s R&DDivision. When in 1993Pioneer joined the Eureka 147/DAB project as the first non-European company, heparticipated in several working groups and task forces. He then worked in theWorldDAB Module A, chaired EACEM PT1.1, and was an ETSI rapporteur and amember of CENELEC TC-206. He retired in 2002. Unfortunately, just after revising themanuscript for the 2nd edition, he suddenly died in early 2003. (Contributed to the 1st and2nd editions, Chapters 2 and 5)
Alexander Zink, MBA, Dipl.-Ing., Erlangen, Germany, graduated from Friedrich-Alexander-University Erlangen-Nuremberg in electrical engineering/microelectronicsand joined Fraunhofer Institute for Integrated Circuits in Erlangen, Germany, in 2000as a vice group leader ‘Broadcast Applications’. He is project director for the informationsystem ‘UMIS’, the broadcast system ‘Fraunhofer DRM ContentServer’ and the DABinformation service ‘Journaline’. For the Digital RadioMondiale consortium (DRM) heserves as vice-chairman of the Technical Committee and as vice president of the DRMAssociation. In addition, he is member of the WorldDMB Technical Committee and theEuropean HD Radio Alliance (EHDRA). (Contributed to the 3rd edition, Chapter 4)
xviii List of Contributors
![Page 18: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/18.jpg)
Preface
Preface to the first edition
The new digital radio system DAB (Digital Audio Broadcasting), developed within theEureka 147 project in close cooperation with the EBU, is a very innovative and universalmultimedia broadcast system that is just being introduced, and which has the potential toreplace existing AM and FM audio broadcast services in many parts of the world in thenear future. In several countries in Europe and overseas, broadcasting organisations,network providers and receiver manufacturers are already implementing digital broad-casting services using the DAB system.
DAB is very different from conventional analogue broadcasting systems. Most ofthe system components such as perceptual audio coding (MPEG-1/2), OFDM channelcoding and modulation, the provision of a multiplex of several services and data trans-mission protocols (MOT), are new concepts typical of digital broadcasting. Even expertsin analogue transmission systems will feel less familiar with these new elements ofbroadcasting technology. Therefore, the aim of this book is to inform the expert readerabout the basic concepts of the DAB system.
Besides introducing the basics, the focus of the book is on the practical implications ofservice provision and the new infrastructure required in broadcasting houses, for multi-plex and networkmanagement, and for coverage planning. Also, some elements of up-to-date receiver concepts are described. The level of standardisation of the DAB system isquite advanced, and the relevant recent international standards and related documentsare introduced and referred to for easy access for the reader seeking technical details. Anextended bibliography is also provided.
The book is designed as a well-structured technical guide by a team of expert authorsclosely involved in the development and standardisation of DAB. This ensures compe-tent presentation and interpretation of the facts based on the latest state-of-the-art. Thebook is primarily aimed at professional users such as developers and manufacturers ofprofessional devices for distribution networks or consumer receivers, planning engineersand operational staff with broadcasters, network providers, service and content provi-ders. For other technically minded people who wish to become acquainted with theconcepts of digital broadcasting, the book will serve as a comprehensive introduction tothe field, since it contains all the information needed for further study. The bookmay alsoserve for academic or educational use, because it is based on the latest versions of the
![Page 19: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/19.jpg)
relevant international standards and publications, as well as actual experience with pilotapplications and first implementation of services.
The editors wish to take this opportunity to express their thanks to all the contributorsfor the enjoyable cooperation and their excellent work, which most of them had tocomplete in addition to their demanding jobs. Many thanks also to Mrs Helga Schon,who was kind enough to design a portion of the drawings for the book. The editors alsowish to thank the publishing team at John Wiley & Sons Ltd. for their interest, under-standing and patience during the writing and production period.
May this book help to introduce the DAB system worldwide.
The EditorsBerlin/Nurnberg, Autumn 2000
Preface to the second edition
The first edition of this book was nearly sold out within a period of less than eighteenmonths. Considering that DAB (now often called Digital Radio) was still in a growingstate of introduction and penetration worldwide, and that this book was still the onlycomprehensive publication in the English language on DAB, the publisher offered toissue a revised edition. This was the chance for the editors and contributors to preparenot only a simple revision of the book, but also to add some newer results of developmentand standardisation, and to further complete the book by adding sections on severalissues. The editors appreciated the many detailed reviews of the first edition (in particularthe one ofMr Franc Kozamernik, in EBU Techn. Review), which pointed their attentionto items that were not appropriately covered, and made suggestions for topics to beincluded in the second edition.
Here, it is only possible to address the most important changes and additions thatwere made to the book: Chapter 1 (Introduction) was updated in several respectsconsidering the newest developments worldwide. Also Chapter 2 (System aspects) wasrevised in many details. Chapter 3 (Audio services) was completely rearranged, newerdevelopments concerning audio coding and several additional aspects were included.Chapter 4 (Data services) was also completed by adding text on new features such as IPtunneling applications. Chapter 5 (Provision of services) now includes the very newtechnology for a DAB Electronic Programme Guide (EPG) and other new features.Chapter 7 (Broadcast side) was completed by an extended part on propagation aspects.Chapter 8 (Receiver side) takes up the latest developments in IC technology and receiverdesign.
Appendix 2 (Introduction of DAB) was updated to the state reached in early 2003.A new Appendix 3 (DAB Frequencies) was added, which provides the current CEPTfrequency tables valid for DAB service implementations in Europe, Canada andAustralia. Last but not least, the Bibliography was updated and completed to the lateststate of standardisation and other literature.
Covering such a huge number of additional subjects was only possible becauseseveral new expert authors from the international scene of DAB development (GeraldChouinard, Neil H. C. Gilchrist, Chris Gould and Ralf Schwalbe) could be persuaded to
xx Preface
![Page 20: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/20.jpg)
contribute. The current team of authors (including the editors) now comprises more than20 outstanding experts in the field of DAB. The editors and authors also appreciatedcomments and support frommany other experts – in particular, the authors of Chapter 4wish to thankMarkus Prosch, FhG-IIS, and Uwe Feindt, Robert Bosch GmbH for theirvaluable contributions and comments on this chapter.
The editors wish to express their thanks to all the contributors, whomade an enormouseffort to provide an up-to-date picture of the DAB development and implementation.
The editors and contributors express their deepest regret for the death of their collea-gue Herman Van Velthoven, who died suddenly a few days after finishing the revision ofhis contributions to Chapters 2 and 5.
The editors also wish to thank the publishing team at JohnWiley & Sons Ltd. for theirinterest, their understanding and patience during the revision and production period.
May this book help to further support the introduction of Eureka 147 DABworldwide.
The EditorsBerlin/Nurnberg, Spring 2003
Preface to the third edition
Similarly, the second edition of this book was practically sold out within a short time.Considering that Digital Audio Broadcasting (DAB) was in a growing state of introduc-tion and penetration worldwide, and that this book was still the only comprehensivepublication in the English language on DAB, the publisher offered to issue a revisededition. This was the chance for the editors and contributors to prepare not only asimple revision of the book, but also to include the latest results in international devel-opment and standardisation, Especially, further developments which led to the DABsystem family comprising DAB and the newer DAB+ andDMB systems, are consideredthrough completely revised respectively new chapters.
At this point, it is only possible to address some of the most important changes andadditions that were made to the book: Chapter 1 (Introduction) was updated consideringthe newest developments. Also Chapter 2 (System Concepts) was updated with respect tothe newly added feature of concatenated coding; the sections on Conditional Access andService Information were revised. Chapter 3 (Audio Services) was completely rearrangedagain, new developments concerning audio coding for DAB+ and multichannel audioprogrammes were included. Chapter 4 (Data Services) was also updated, in particularextended sections on advanced text features were added. Chapter 5 (Provision ofServices) now includes the latest technology for the DAB Electronic Programme Guide(EPG). Chapter 7 (Broadcast Side) was completed by an extended part on propagationaspects and latest results from planning conferences. Chapter 8 (The Receiving Side)takes up the latest developments in IC technology and receiver design. An additionalChapter 9 (Mobile Television and Multimedia) now covers DMB (Digital MultimediaBroadcasting) and IPDC (IP Datacast) as rather new components of the DAB systemfamily.
Preface xxi
![Page 21: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/21.jpg)
Whilst some of the authors who contributed to the former editions were no longeravailable, a number of new expert authors were persuaded to contribute to the thirdedition (Birgit Bartel-Kurz, Roland Brugger, Frank Herrmann, Frank Hofmann, DavidMarston, Markus Prosch, Alexander Zink). Most of them were (or still are) active indifferent DAB related standardisation bodies, such as WorldDAB/WorldDMB, CEPT,DRM etc. - sometimes at higher levels.
The editors wish to express their thanks to all the contributors, who again made mucheffort to provide an up-to-date picture of the DAB system family’s development andimplementation. They also wish to thank again the publishing team at JohnWiley & SonsLtd. for their interest, their support and patience during the revision and productionperiod of the third edition.
May this third edition of the book help to further support the implementation of theDAB system family and its applications worldwide.
The EditorsBerlin/Nurnberg, Autumn 2008
xxii Preface
![Page 22: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/22.jpg)
Foreword
Radio must surely be the most enduring and reliable of all electronic media. Not only didit survive the introduction of television, it thrived and grew. More recently it has facedcompetition from the Internet and mobile entertainment on mobile phones and MP3players. And still, radio survives and flourishes! This does not surprise me at all. Why?Because radio is a simple proposition, it is available everywhere, it costs nothing, all youdo is turn it on and it just works. No licences, no downloading, no complicated choices, itis live, always relevant and engaging.
Will it go on surviving? My view – as a radio engineer, as a programmer and as abroadcaster – is a very definite ‘yes’. But it must go digital to offer a richer experience tothose listeners who want more, and work as well or better for those who are happy withradio as they know it. Going digital has not been an easy path, and undoubtedly somecountries have struggled whilst others have had great success. However, this is not areflection of the technology (otherwise it would not have worked in the UK, Denmark orKorea, for example) but is down to the local regulation, politics and business models, allof which have to be right for radio to thrive.
The DAB family is nowwell established with the underlying technology having provento be robust and flexible. But technology does not stand still and the family of standards,collectively referred to as ‘Eureka 147’, now includes DMB mobile TV and DAB+ withhighly efficient AAC audio coding, not to mention new multimedia technologies andupdated metadata options. This has enabled digital radio to keep pace with changingconsumer expectations and the impact of media convergence.
The traditional experience of one type of media being consumed on a specific devicehas been disappearing for some time to the extent that we now expect to view televisioncontent on almost anything with a screen, whether it is a TV, games console, MP4 playeror a computer. This shift in how people expect to consume media is having a profoundeffect on broadcasters and the communications industry, and one that WorldDMB andits members have been able to address.
DAB and DAB+ offer an identical consumer experience centred on radio, with text,slideshow, EPG and other multimedia features. DAB offers eight to ten radio serviceswithin a 1.5 MHz multiplex whilst DAB+ (using HE AACv2) can accommodate 20–30radio services in the same spectrum. DMB is primarily a mobile TV platform, sharing thesame multiplex and carrier structure as DAB, but it can be used for a visual radio servicewith similar multimedia properties to DAB and DAB+.
![Page 23: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/23.jpg)
Since any combination of DAB, DAB+ and DMB services can co-exist on one ormore multiplexes, the Eureka 147 Family is now seen as a highly cost effective solutionfor many broadcasters who want to enhance their services with multimedia content.Services are now commercially available in Belgium, China, Denmark, Germany, Malta,Norway, Singapore, South Korea, Spain, Switzerland and the UK. MeanwhileAustralia, the Czech Republic, France, Ghana, Hong Kong, Hungary, Indonesia,Ireland, Israel, Italy, Kuwait, Malaysia and Vietnam are already broadcasting orabout to start full time licensed services, with many other countries engaged in successfultrial phases. This endorsement of the technology by so many countries is testament to thestrength of the technology and the compelling advantages it offers over other options.Other means of getting radio to consumers also exist, of course, including the Internetand audio channels over digital TV, but for a mass market free-to-air platform, the‘Eureka 147 Family’ remains the system of choice.
Perhaps the most exciting development since this handbook was last published is theremarkable growth in consumer receivers for DAB and DMB, which are now plentifuland cheap. The market already boasts around 250 DMB different receiver models, in allshapes and sized from simple USB sticks to mobile phones and even navigation systems.There are 1,000 different digital radio receivers from hundreds of manufacturing nameswith consumer prices from as low as $25. Digital radios offering new features such as‘pause and rewind’, electronic programme guides, pictures and text to complement theaudio are all becoming popular, and there are no barriers to building the technology intoother devices such as PMPs and mobile phones thanks to the advanced low-powerchipsets available. This is always the hallmark of a successful and mature technology.
The drive behind the growth of the ‘Eureka 147 Family’ has been the consumer-leddemand for interactive and innovative multimedia content. No other technology canoffer the unique combination of content flexibility required by broadcasters, cost advan-tage and scalability of transmission networks, and thematurity of receivers as reflected inthe choice available and low device cost. Broadcasters andmanufacturers are respondingwith new features and services, exciting new ways to use the radio and enjoy its content.Radio is rapidly evolving to become a blend of passive and active content, audio andmultimedia, listen live or listen later, even a social networking hub where listeners canshare the same experience together!
Any broadcaster who really wants to engage with his or her audience, whatever theirage, expectations and media demands, will find digital radio remains, like traditionalradio, one of the most powerful ways to reach people whatever they are doing, whereverthey may be. And the great thing about the Eureka 147 family is . . . ‘it just works’.
QuentinHowardPresident,WorldDMBForum
xxiv Foreword
![Page 24: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/24.jpg)
Abbreviations
A/D analogue/digital conversionAAC Advanced Audio CodingACI adjacent channel interferenceACTS Advanced Communications Technologies and ServicesADC analogue to digital converterADR Astra Digital RadioADSL asymmetric digital subscriber lineAES Audio Engineering SocietyAES Advanced Encryption StandardAFC automatic frequency controlAGC automatic gain controlAGL above ground levelAIC Auxiliary Information ChannelAM amplitude modulationAMPS Advanced Mobile Phone SystemAMSS AM Signalling SystemAPI application programming interfaceASCII American Standard Code for Information InterchangeASCTy Audio Service Component TypeAsu announcement supportATM asynchronous transfer modeATSC Advanced Televison Systems CommitteeAU Access Unit (MPEG-4)AV Audio-visualAWGN Additive white Gaussian noiseBAL Bit AllocationBER bit error ratioBST Band Segmented TransmissionBWS Broadcast Web SiteC/N carrier-to-noise ratioCA Conditional accessCAT Conditional Access TableCAZAC constant amplitude zero auto-correlation
![Page 25: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/25.jpg)
CCITT Comite Consultatif International Telephonique etTelegraphique (ITU-T)
CD Compact DiskCDF cumulative distribution functionCDMA code division multiple accessCENELEC European Committee for Electrotechnical Standardisation, BrusselsCEPT Conference des Administrations Europeenes des Postes
etTelecommunicationsCFB Cipher Feedback Block ChainingCIF Common Interleaved FrameCMAC Cipher-based Message Authentication ModeCMOS complementary metal oxide semiconductorCOFDM Coded Orthogonal Frequency Division MultiplexCPU Central processing unitCRC cyclic redundancy checkCTS Composition Time StampCU capacity unitCW control wordCW continous waveD/A digital /analogue conversionDAB Digital Audio BroadcastingDAC digital-to-analogue converterDAD destination addressDAT Digital Audio Tape recording formatdBFS relative signal level in Decibel (Full scale), related to the digital coding
limit 0 dBFSdBm absolute signal level in Decibel, relative to 1 mWdBrel relative signal level in Decibel, related to a pre-defined reference
leveldBu absolute signal level in Decibel, related to a voltage of 0 dBu=0.775 VDC Direct currentDCA digitally controlled amplifierDE Downstream EntityDECT Digital European Cordless TelephoneDGPS differential GPSDIQ digital in-phase and quadratureDL Dynamic LabelDMB Digital Multimedia BroadcastingDQPSK differential quadrature phase shift keyingDRB Digital Radio Broadcasting (Canada)DRC Dynamic Range ControlDRCD DRC dataDRM Digital Radio MondialeDRM Digital Rights ManagementDSCTy Data Service Component TypeDSP digital signal processor
xxvi Abbreviations
![Page 26: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/26.jpg)
DSR Digital Satellite RadioDTP desktop publishing systemDTV Digital televisionDVB(-T) (-H) Digital Video Broadcasting (-Terrestrial) (-Handheld)DVD Digital Video (or Versatile) Diske.i.r.p. effective isotropic radiated powerEACEM European Association of Consumer Electronics ManufacturersEBU European Broadcasting UnionEC European CommunityECC Extended Country CodeECM Entitlement Checking MessageEEP Equal Error ProtectionEId Ensemble IdentifierEIT Event Information TableEMC electromagnetic compatibilityEMM Entitlement Management MessageEN European Telecommunication Standard (ETSI document type;
normative)EOH End of HeaderEPG Electronic Programme GuideEPM Enhanced Packet ModeEPP Ensemble Provider ProfileERP, e.r.p. effective radiated powerES European Standard (ETSI document type; normative)ETI Ensemble Transport InterfaceETS European Telecommunications Standard (ETSI document type;
normative)ETSI European Telecommunications Standards InstituteFBAR film bulk acoustic resonatorFCC Federal Communications CommissionFEC forward error correctionFFT fast Fourier transformationFI Frequency InformationFIB Fast Information BlockFIC Fast Information ChannelFIDC Fast Information Data ChannelFIG Fast Information GroupFM frequency modulationF-PAD Fixed Programme Associated DataFTP File Transfer ProtocolGE06 Geneva 2006 frequency planGIF Graphics Interchange FormatGPS Global Positioning SystemGSM Global System for MobileHAAT height above average terrainHE-AAC High Efficiency AAC
Abbreviations xxvii
![Page 27: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/27.jpg)
HECA High Efficient Conditional AccessHF high frequencyHiFi, hi-fi High FidelityHMI human machine interfaceHTML Hyper Text Markup LanguageHuMIDAB Human Machine Interface for DABI/Q in-phase and quadratureIBAC In-Band-Adjacent-ChannelIBOC In-Band-On-ChannelId identifierIF intermediate frequencyIFA Internationale Funkausstellung (World of Consumer Electronics),
BerlinIFFT inverse fast Fourier transformationIM intermodulationIMDCT inverse modified discrete cosine transformationINT IP/MAC Notification TableIOD Initial Object DescriptionIP Internet ProtocolIP3 3rd order intercept pointIPDC Internet Protocol Data CastingIS International Standard (ISO document type; normative)ISDB Integrated Services Digital BroadcastingISDN Integrated Services Digital NetworkISO International Standards OrganisationITU(-R) International Telecommunications Union, Radiocommunications
SectorITU-T International Telecommunications Union, Telecommunications
Standardisation SectorJESSI Joint European Submicron Silicon InitiativeJML Journaline Markup LanguageJPEG Joint Photographic Experts Groupkbps kilobit per secondkW kilowattLAN local area networkLFE Low Frequency Effect/Enhancement (channel/signal)LI logical interfaceLNA low noise amplifierLSB least significant bitLTO local time offsetLU Loudness UnitM/S music/speechM4M Multimedia for MobilesMA02 Maastricht 2002 frequency planMAC multiple accumulateMbps Megabit per second
xxviii Abbreviations
![Page 28: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/28.jpg)
MCI Multiplex Configuration InformationMEMO Multimedia Environment for MobilesMFN multiple frequency networkMJD Modified Julian DateMNSC Multiplex Network Signalling ChannelMOT Multimedia Object TransferMPE multi-protocol encapsulationMPEG Moving Pictures Experts GroupMPS MPEG SurroundMSB most significant bitMSC Main Service ChannelMST Main Stream DataMTBF mean time between failuresMUSHRA MUltiple Stimuli with Hidden Reference and Anchor (test)MUSICAM Masking pattern-adaptedUniversal Sub-band Integrated Coding and
MultiplexingMW medium waveNAB National Association of Broadcasters (USA)NASC Network Adapted Signalling ChannelNCO numerically controlled oscillatorNICAM Near Instantaneously Companded AudioNIT Network Information TableNRSC National Radio Systems CommitteeOD Object DescriptionODA Open Data ApplicationODG Objective Difference Grade (of quality assessment)OFDM Orthogonal Frequency Division MultiplexOLED organic light-emitting diodeOMA Open Mobile AllianceOOI onset of impairment pointOSI Open Systems InterconnectionsPAD Programme-associated DataPAL Phase Alternating LinePAT Programme Association TablePC parity checkPCM pulse code modulationPCR Programme Clock ReferencePDH plesiochronous digital hierarchyPEAQ Perceptual Evaluation of Audio QualityPES Packetized Elementary StreamPI Programme IdentifierPID Packet IdentifierPL Protection LevelPLL phase locked loopPMC Production technology Management Committee (EBU)PML permitted maximum level
Abbreviations xxix
![Page 29: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/29.jpg)
PMT Programme Map TablePNA personal navigation assistantPNum Programme NumberPOF point of failurePPM peak programme level meterpps pulse per secondPRBS pseudo random binary sequencePRC Prime Rate ChannelPS Parametric Stereo (coding)PSI/SI Program Service Information/Service InformationPSK phase shift keyingPSTN Public Switched Telephone NetworkPTy Programme TypeQAM quadrature amplitude modulationQMF quadrature mirror filterQPSK quaternary phase shift keyingRAM random access memoryRBDS Radio Broadcast Data SystemRCPC rate compatible punctured convolutional codesRDI Receiver Data InterfaceRDS Radio Data SystemRF radio frequencyRISC reduced instruction set computerRMS root mean square valueRRC Regional Radiocommunication ConferenceRS Reed-SolomonRSS Rich Site Summary or Really Simple SyndicationSAC Spatial Audio CodingSAD Start AddressSAOC Spatial Audio Object CodingSAT Sub-channel Assignment TableSAW surface acoustic waveSBR Spectral Band Replication (audio coding scheme addendum)SC Synchronisation ChannelSC Lang Service Component LanguageSCF-CRC Scale Factor CRCSCFSI Scale Factor Select InformationSCT Service Component TriggerSD Secure DigitalS-DAB Satellite-based DABSDG Subjective Difference Grade (of quality assessment)SDH synchronous digital hierarchySDT Service Description TableSES Societe Europeenne des SatellitesSFN single frequency networkSI Service Information
xxx Abbreviations
![Page 30: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/30.jpg)
SId Service IdentifierSIM Subscriber Identification ModuleSL Synchronisation LayerSMPTE Society of Motion Pictures & Television EngineersSNR signal-to-noise ratioSPP Service Provider ProfileSSTC Single Stream CharacterisationSTC-C(TA) STI – Control – Transport Adapted InterfaceSTI Service Transport InterfaceSTI(PI,X) STI – Physical InterfaceSTI-C STI – ControlSTI-C(LI) STI – Control – Logical InterfaceSTI-D STI – DataSTI-D(LI) STI – Data – Logical InterfaceTA Traffic AnnouncementTCP Transfer Control ProtocolT-DAB terrestrial DABTDC Transparent Data ChannelTDM time-domain multiplexT-DMB Terrestrial Digital Multimedia BroadcastingTFPR Time-Frequency-Phase-ReferenceTII Transmitter Identification InformationTM Transmission ModeTMC Traffic Message ChannelTNS Temporal Noise ShapingTP Traffic ProgrammeTPEG Transport Protocol Experts GroupTR Technical Report (ETSI document type; informative)TS Technical Specification (ETSI document type; normative), Transport
stream (MPEG)TSDT Transport Stream Description TableTTI Traffic and Travelers InformationTV, tv televisionUCS Universal Character SetUE Upstream EntityUEP Unequal Error ProtectionUHF ultra high frequencyUMTS Universal Mobile Telecommunication SystemUTC Coordinated Universal TimeUTF Unicode Transformation FormatVCA voltage controlled amplifierVCO voltage controlled oscillatorVHF very high frequencyVLSI very large scale integrationVpp peak-to-peak voltageVU Volume Unit
Abbreviations xxxi
![Page 31: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/31.jpg)
WARC World Administrative Radio ConferenceWCDMA Wide Band Code Division Multiple AccessWFA wave digital filterWI95 Wiesbaden 1995 frequency planWLAN wireless local area networkWMA Windows Media AudioXML Extensible Markup LanguageX-PAD Extended Programme-associated Data
xxxii Abbreviations
![Page 32: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/32.jpg)
1
Introduction
1.1 General
The new digital radio system DAB (Digital Audio Broadcasting, nowadays often calledDigital Radio) is a very innovative and universal multimedia broadcast system which willreplace the existing AM and FM audio broadcast services in many parts of the world inthe future. It was developed in the 1990s by the Eureka 147/DAB project. DAB is verywell suited for mobile reception and provides very high robustness against multipathreception. It allows use of single frequency networks (SFNs) for high frequencyefficiency.
Besides high-quality digital audio services (mono, two-channel or multichannel stereo-phonic), DAB is able to transmit programme-associated data and a multiplex of otherdata services (e.g. travel and traffic information, still and moving pictures, etc.).A dynamic multiplex management on the network side opens up possibilities for flexibleprogramming.
In several countries in Europe and overseas broadcast organisations, network provi-ders and receiver manufacturers are going to implement digital broadcasting servicesusing DAB system in pilot projects and public services.
DAB works very differently from conventional broadcasting systems. Most of thesystem components such as perceptual audio coding, channel coding and modula-tion, multiplex management or data transmission protocols are new solutions andtypically not so familiar to the expert in existing analogue or digital broadcastsystems.
DAB was developed to a DAB system family, comprising the DAB (Digital AudioBroadcasting), DAB+ (extendedDAB system for new audio coding schemes) and DMB(Digital Multimedia Broadcasting) systems.
The level of standardisation of the DAB system is rather advanced and the variousrecent international standards and related documents are introduced and referred to foreasy access for the reader seeking technical details.
Digital Audio Broadcasting: Principles and Applications of DAB, DAB+ and DMB, Third Edition Edited by W. Hoeg and T. Lauterbach© 2009 John Wiley & Sons, Ltd. ISBN: 978-0-470-51037-7
![Page 33: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/33.jpg)
1.2 Radio in the Digital Age
Radio broadcasting is one of the most widespread electronic mass media comprisinghundreds of programme providers, thousands of HF transmitters and billions of recei-vers worldwide. Since the beginning of broadcasting in the early 1920s, the market hasbeen widely covered by the AM and FM audio broadcasting services.
Today we live in a world of digital communication systems and services. Essential partsof the production processes in radio houses were changed to digital ones in recent times,beginning with the change from conventional analogue audio tape to digital recording onmagnetic tape or hard disk, digital signal processing in mixing desks and digital transmis-sion links in distribution processes. In addition, there are also other digital distribution orstorage media in a growing music market such as several digital tape or disk formats(CD, MiniDisk or DVD), or streaming and download formats (such as MP3) fordistribution via the Internet (see also section 1.6.4).
Consequently, broadcast transmission systems now tend to change from conven-tional analogue transmission to digital. The first steps in the introduction of digitalbroadcasting services were taken by the systems NICAM 728 (Near InstantaneouslyCompanded Audio Multiplex, developed by the BBC for stereo television sound in theVHF/UHF bands), DSR (Digital Satellite Radio, which was already shut down), orADR (Astra Digital Radio), see section 1.6.1, but none were suited to replace theexisting conventional services completely, especially for mobile reception. For thatreason, the universal digital multimedia broadcasting system Eureka 147 DAB wasdeveloped and is now being introduced worldwide. In parallel, other digital broad-casting systems such as DRM (Digital Radio Mondiale, see section 1.6.3) or DVB-T(Digital Video Broadcasting, see section 1.6.2) are going to complement digital radioand television.
Normally, it takes a period of a human generation (or at least a period in the life of areceiver type generation, i.e. approximately 10 years) to replace an existing broadcastingsystem with a new one. Therefore, strong reasons and very convincing advantages arerequired to justify the introduction of such a new system.
1.3 Benefits of the Eureka 147 DAB Systems Family
1.3.1 The Original DAB System
As expected, there will always be some problems, or additional effort will be needed,when replacing an existing technology with a new one, such as:
• lack of transmission frequencies;• costs for development and investment;• looking for providers for new non-conventional services (e.g. data services);• solving the chicken and egg problem (who will be first – the service provider or the
receiver manufacturer?).
Nevertheless, the Eureka 147 DAB system family provides a wealth of advan-tages over conventional audio broadcast systems such as analogue VHF/FM or
2 Digital Audio Broadcasting
![Page 34: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/34.jpg)
AM radio, and also partly over other existing digital broadcast systems such asDSR (no longer available), ADR, etc. The following list will only highlight somekey advantages; many more details will be explained in the corresponding sectionsof the book.
1.3.1.1 Quality of Service
DAB uses all the possibilities of modern digital communication technologies and canthus provide a much higher level of quality of service, such as:
• Superior sound quality: DAB users can enjoy pure undistorted sound close to CDquality. New features such as Dynamic Range Control (DRC) or Music/SpeechControl can be used individually by customers to match the audio quality to theirneeds.
• Usability: Rather than searching wavebands, users can select all available stations orpreferred formats from a simple text menu.
• Perfect reception conditions: With just a simple, non-directional whip antenna, DABeliminates interference and the problem of multipath while in a car. It covers widegeographical areas with an even, uninterrupted signal. Once full services are up andrunning, a driver will be able to cross an entire country and stay tuned to the samestation with no signal fade and without altering frequency.
1.3.1.2 Wide Range of Value-added Services
DAB is quite unique in that both music and data services can be received using the samereceiver. One receiver does it all, such as:
• Typical audio broadcasting (main service): Music, drama, news, information, etc., canbe received in monophonic or stereophonic form as is well known from conventionalradio programmes; there is also the potential to transmit multichannel (5.1 format)audio programmes as well.
• Programme-associated data (PAD): DAB broadcast receivers can display text infor-mation in far greater detail than RDS, such as programme background facts, a menuof future broadcasts and complementary advertising information. Receivers attachedto a small screen will display visual information such as weather maps or CD coverimages.
• Information services: Services from sources other than the broadcasting stationare included within the same channel for the user to access at will. These includenews headlines, detailed weather information or even the latest stock marketprices.
• Targeted music or data services: Because digital technology can carry amassive amountof information, specific user groups can be targeted with great accuracy because eachreceiver can be addressable.
• Still or moving pictures: Data can also appear as still or moving photographic pictures,accompanied by an audio service or as separate information.
Introduction 3
![Page 35: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/35.jpg)
1.3.1.3 Universal System Layout
The DAB system has a fairly universal and well-standardised system layout which allowsapplications for all known transmission media and receiving situations.
• Standardisation: The level of international standardisation of all basic principles andtransmission tools for the new DAB system is very high (much more than 50 interna-tional standards cover all the necessary details).
• Unique system design: DAB services will be available mainly on terrestrial, but are alsosuited for cable and satellite networks, and the same receiver could be used to provideradio programmes and/or data services for national, regional, local and internationalcoverage.
• Wide choice of receivers: It is possible to access DAB services on a wide range ofreceiving equipment including fixed (stationary), mobile and portable radio receivers,optionally completed with displays or screens, and even personal computers.
1.3.1.4 Flexibility of Multiplex Configuration
DAB services are transmitted in a flexible multiplex configuration, which can be easilychanged instantaneously to the actual needs of the content providers.
• Multiplex configuration: The arrangement of services in a DAB multiplex may bechanged instantaneously to match the needs of the providers of programmes or dataservices, without interrupting ongoing services.
• Bit rate flexibility: The programme provider can choose an appropriate bit rate for acertain audio programme according to its quality, for instance less than 100 kbpsfor a pure speech programme, 128 kbps for monophonic or 256 kbps for stereo-phonic music; also half sampling frequency can be used for lower quality services.So the available bit rate can be split optimally between different services of a DABensemble.
1.3.1.5 Transmission Efficiency
Compared to conventional broadcast systems much less economic effort in investmentand operation is needed for a DAB transmission system.
• Lower transmission costs for broadcasters: DAB allows broadcasters to provide a widerange of programme material simultaneously on the same frequency. This not onlymakes room for a vastly increased number of programmes to increase user choice, butalso has important broadcast cost-cutting implications.
• Lower transmission costs for transmitter network providers: For digital transmission aDAB transmitter needs only a fraction of the electrical energy compared to a conven-tional AM or FM transmitter.
• Frequency efficiency: DAB transmitter networks can be designed as Single FrequencyNetworks (SFNs), which saves a lot of transmission frequencies and thus transmissioncapacity on air.
4 Digital Audio Broadcasting
![Page 36: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/36.jpg)
These advantages ofDAB (and there aremore if we look further into the details) justifythe introduction of DAB into the media world in order to replace the existing conven-tional radio systems step by step over a longer period.
1.3.2 Benefits of the Upgraded System DAB+
In themeantime, theWorldDMB (WorldDAB) Forum have developed an upgrade of theEureka 147 DAB system called DAB+ in order to improve the audio coding efficiencyusing the new coding schemes of MPEG-4 HE AAC v2, see Chapter 3. This will provideadditional advantages over the mentioned benefits of the original DAB system
• Latest MPEG-4 audio codec delivers exceptional performance efficiency.• More stations can be broadcast on a multiplex, greater station choice for consumers
available.• Higher frequency efficiency of radio spectrum than with conventional DAB.• Lower transmission costs for digital stations than with conventional DAB.• New receivers are backwards compatible with existing MPEG Audio Layer II
broadcasts, including scrolling text and multimedia services.• Current MPEG Audio Layer II services remain unaffected.• More robust audio delivery than with conventional DAB.• Optimised for live broadcast radio.• Broadcasters/regulators can select different audio standards – either MPEG-2 Audio
Layer II, or the new MPEG-4 audio coding, or both, to suit their country.• Fast re-tuning response time of the receiver (low zapping delay).• Transmission of MPEG Surround is possible, with lower bit-rates than with conven-
tional DAB.
Most of these benefits are also true for DMB (Digital Multimedia Broadcasting), seeChapter 9.
1.4 History of the Origins of DAB
1.4.1 Steps of Development
In the early 1980s the first digital sound broadcasting systems providing CD-like audioquality were developed for satellite delivery. These systems made use of the broadcastingbands in the 10 to 12 GHz region, employed very little sound data compression and werenot aimed at mobile reception. Thus, it was not possible to serve a great majority oflisteners, such as those travelling in cars. Also, another feature of the well-established FMradio could not be provided by satellite delivery, namely ‘local services’. Consequentlyterrestrial digital sound broadcasting was considered as an essential delivery method forreaching all listeners.
At first, investigations were initiated by radio research institutes looking into thefeasibility of applying digital modulation schemes in the FM bands. However, thestraightforward use of pulse code modulation (PCM) in the upper portions of the FMband generated intolerable interference in most existing FM receivers and was spectrally
Introduction 5
![Page 37: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/37.jpg)
very inefficient. Mobile reception was never tried and would not have succeeded. Amuchmore sophisticated approach was definitely necessary.
In Germany the Federal Ministry for Research and Technology (BMFT, nowBMBF) launched a research initiative to assess the feasibility of terrestrial digitalsound broadcasting comprising more effective methods of sound data compressionand efficient use of the radio spectrum. A study completed in 1984 indicated thatpromising results could be expected from highly demanding research activities. As anew digital sound broadcasting system could only be implemented successfully bywide international agreement, BMFT set the task for its Project Management Agencyat DLR (German Aerospace Centre) to form a European consortium of industry,broadcasters, network providers, research centres and academia for the developmentof a new digital audio broadcasting system. Towards the end of 1986 a consortium of19 organisations from France, Germany, The Netherlands and the United Kingdomhad signed a co-operation agreement and applied for notification as a Eureka project.At the meeting in December 1986 of the High Level Representatives of the Eurekapartner states in Stockholm the project, now called ‘Digital Audio Broadcasting,DAB’, was notified as the Eureka 147 project. National research grants were awardedto that project in France, Germany and The Netherlands. However, owing to grantingprocedures official work on the project could not start before the beginning of 1988and was supposed to run for four years.
Credit must also be given to the European Broadcasting Union (EBU), which hadlaunched work on the satellite delivery of digital sound broadcasting to mobiles in thefrequency range between 1 and 3 GHz, by awarding a research contract to the CentreCommun d’Etudes de Telediffusion et Telecommunications (CCETT) in Rennes,France, prior to the forming of the DAB consortium. As the CCETT also joined theDAB project, the work already begun for the EBU became part of the DAB activities andthe EBU a close ally and active promoter for DAB. Later, this proved very important andhelpful in relations with the International Telecommunications Union (ITU-R) and thestandardisation process with the European Telecommunications Standards Institute(ETSI).
From the beginning the goals set for the project were very demanding and difficult toachieve. Perfect mobile reception was the overall aim. In detail the list of requirements tobe met included the following items:
• audio quality comparable to that of the CD;• unimpaired mobile reception in a car, even at high speeds;• efficient frequency spectrum utilisation;• transmission capacity for ancillary data;• low transmitting power;• terrestrial, cable and satellite delivery options;• easy-to-operate receivers;• European or better worldwide standardisation.
The first system approach considered at least 16 stereo programmes of CD audioquality plus ancillary data to be transmitted in the 7 MHz bandwidth of a televisionchannel. This definitely cannot be achieved by simply transmitting the combined net
6 Digital Audio Broadcasting
![Page 38: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/38.jpg)
bit rates of 16 CD-like programme channels, which are around 1.4 Mbps each, overthe TV channel. So a high degree of audio data compression without any perceptibleloss of audio quality was mandatory. Data rates below 200 kbps per stereo channelhad to be achieved.
Unimpaired mobile reception was also required to overcome the adverse effects ofmultipath signal propagation with the associated frequency selective fading.
Audio data compression and the transmissionmethod became the central efforts of theresearch project. Both tasks were addressed in a broad and comprehensive manner. Foraudio coding four different approaches were investigated: two sub-band coding systemscompeted with two transform coding systems. Similarly, for the transmission methodfour different schemes were proposed:
• one narrow-band system;• one single carrier spread-spectrum system;• one multicarrier OFDM system;• and one frequency-hopping system.
All approaches were developed to an extent where – either through experimental evidenceor at least by thorough simulation – a fair and valid comparison of the performance of theproposed solutions became possible. The period of selection of and decision for the bestsuited audio coding system and the most appropriate transmission scheme was a crucialmoment in the history of the Eureka 147 consortium. For audio coding the greatest partof the selection process happened externally to the consortium. All four coding schemespreviously had been within the activities of the ISO/IECMoving Pictures Experts Group(MPEG), which worked on standardisation for data compressed video and audio coding.There the solutions offered by Eureka 147 competed against 10 other entries from othercountries, worldwide. The MPEG Audio Group set up a very elaborate and qualifiedaudio quality assessment campaign that was strongly supported by Swedish Radio, theBritish Broadcasting Corporation and the Communications Research Centre, Canada,among others. The very thorough subjective audio quality tests revealed that the audiocoding systems submitted by Eureka 147 showed superior performance and consequentlywere standardised by ISO/IEC as MPEG Audio Layers I, II and III. Within theEureka 147 consortium, after long consideration Layer II, also known as MUSICAM,was selected for the DAB specification.
The process of choosing the most appropriate transmission method took place withinthe Eureka 147 consortium alone. In simulations performed according to rules workedout by the members the four approaches were put to the test. This showed that thebroadband solutions performed better than the narrow-band proposal. Amongthe broadband versions the spread-spectrum approach had a slight advantage over theOFDM approach, while the frequency-hopping solution was considered too demandingwith respect to network organisation. However, the OFDM system was the only one thatwas already available in hardware with field-test experience – in the form of the codedOrthogonal FrequencyDivisionMultiplex (COFDM) system, while the spread-spectrumproposal by then was not developed as hardware at all and was estimated to be verycomplex. So, the choice fell on COFDM, which has since proven to be an excellentperformer.
Introduction 7
![Page 39: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/39.jpg)
A further important decision had to be made relating to the bandwidth of the DABsystem. From a network and service area planning point of view as well as obtainablefrequency spectrum perspectives, an ensemble of 16 programmes on one transmitter withthe 7 MHz bandwidth of a TV channel proved to be much too inflexible, although inexperiments it had provided very good performance in a multipath environment.Therefore, a considerable but reasonable reduction in transmission bandwidth wasnecessary. In Canada experiments with the COFDM system revealed that substantialperformance degradation begins around 1.3MHz and lower. So, a reasonable bandwidthfor a DAB channel or ‘DAB block’ was defined as 1.5 MHz. This allows severalpossibilities, as follows.
One 7MHz TV channel can be divided into four DAB blocks, each carrying ensemblesof five to seven programmes. With four blocks fitting into 7MHz service area planning ispossible with only one TV channel, without having adjacent areas using the same DABblock. Furthermore, 1.5 MHz bandwidth is sufficient to transport one MPEG codedaudio/video bit stream.
After the above-mentioned important decisions had been made the members of theconsortium all turned their efforts from their individual approaches to the commonlydefined system architecture and with rapid progress developed the details of thecomplete basic DAB specification to be submitted to the international standardisationbodies. By that time, another European research project, the JESSI project AE-14,was awaiting the DAB specification to begin the development of chip-sets for DAB.Also, the standardisation bodies like ETSI were well aware of the submission of thespecification since Eureka 147 members had been very active in testing and presentingthe results of their research and development on many important occasions, togetherwith or organised by the EBU.
The first official presentation of DAB took place at the World Administrative RadioConference 1988 (WARC’88) in Geneva for the delegates of this conference. As the issueof a frequency allocation for digital sound broadcasting in the L-band around 1.5 GHzwas up for decision, a demonstration simulating satellite reception was presented.A transmitter on Mont Saleve radiated the DAB signal in the UHF TV band, giving indowntown Geneva an angle of signal incidence similar to that from a geostationarysatellite. Mobile reception was perfect and the delegates to the conference were highlyimpressed. In consequence the conference assigned spectrum in the L-band for satellitesound broadcasting with terrestrial augmentation permitted.
One year later DAB was presented at the ITU-COM exhibition in Geneva. In 1990tests with mobile demonstrations were run by Canadian broadcasters in Toronto,Ottawa, Montreal and Vancouver. DAB demonstrations and exhibits have been shownat all International Radio Shows (IFA) in Berlin and the UK Radio Festivals inBirmingham since 1991. Four International DAB Symposia have been held up to now:1992 in Montreux, 1994 in Toronto, 1996 again in Montreux and 1999 in Singapore. In1994 amobile DAB demonstration was presented at the Arab States BroadcastingUnionConference in Tunis. From all these activities worldwide recognition and appreciationwas gained for DAB.
The efforts and results of finding acceptance for DAB in the United States deserve anextra paragraph. As early as 1990 – by invitation of the National Association ofBroadcasters (NAB) – the consortium presented DAB in a low key fashion at the NAB
8 Digital Audio Broadcasting
![Page 40: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/40.jpg)
Convention in Atlanta, Georgia. This led to a very elaborate mobile demonstration andexhibition at the next NAB Convention in 1991 in Las Vegas, Nevada. Several of theNAB officials by that time were very interested in reaching a cooperation and licenceagreement with the Eureka 147 consortium. However, strong opposition against thatsystem – requiring new spectrum and the bundling of several programmes onto onetransmitter – also arose. The US radio industry – that is, the broadcasters – feared newcompetition from the licensing of new spectrum. They preferred the idea of a systemapproach named ‘In-Band-On-Channel (IBOC)’, where the digital presentation of theiranalogue programmes is transmitted together and within the spectrum mask of theirlicensed FM channel (see also section 1.6).
This, of course, would avoid the need of new licensing for digital broadcasting and thuskeep new competition away. However appealing and spectrum efficient this concept maybe, the realisation might prove to be a very formidable technical task. No feasibledevelopment was available at that time, but fast development of an IBOC system waspromised. Eureka 147 DAB performed flawlessly at Las Vegas, but those opposing thesystem claimed that the topography around Las Vegas was much too favourable to putDAB to a real test. So it was requested that DAB should next come to the 1991 NABRadio Show in San Francisco to be tested in a very difficult propagation environment.One main transmitter and one gap filler were set up and mobile reception in downtownSan Francisco was impressively demonstrated. An announced demonstration of IBOCbroadcasting did not take place as the equipment was not ready. In spite of the goodresults the opposition to DAB gained momentum and the NAB officially announced itspreference for an IBOC system. This was not in line with the intentions of the ConsumerElectronics Manufacturers Association (CEMA) of the Electronics Industry Association(EIA) which came to an agreement with the NAB to run very strictly monitoredlaboratory tests in Cleveland and field trials in San Francisco comparing theEureka 147 DAB with several US IBOC and IBAC (In-Band-Adjacent Channel) sys-tems. The results were to be presented to the Federal Communications Commission(FCC) for rule-making relating to digital sound broadcasting. While Eureka 147 soonhad equipment ready for the tests, the US proponents for a long time could not provideequipment and delayed the tests until 1995. In the laboratory tests DAB outperformed allcompeting systems by far. Claiming to have been unfairly treated in the evaluation of thelaboratory tests, all but one of the US proponents of terrestrial systems withdrew fromthe field tests in San Francisco.
For Eureka 147 the Canadian partner Digital Radio Research Inc. (DRRI) installedon contract a single frequency network of one main transmitter and two gap fillers toprovide coverage for the area designated for mobile testing. Again DAB providedexcellent performance as was documented in the final reports of the CEMA.Nevertheless, the United States still pursued the concept of IBOC although severalgenerations of IBOC equipment and redesigns have only produced marginal perfor-mance. Even though numerous Americans now admit that DAB is a superior systemthey claim that it is not suited for US broadcasters. Finally, in October 2002, the FederalCommunications Commission FCC approved In-Band On-Channel (IBOC) systems forthe AM and FM band developed by the company iBiquity. Stations may implementdigital transmissions immediately; however, AM stations may send the IBOC signalduring the day only.
Introduction 9
![Page 41: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/41.jpg)
Standardisation in Europe and worldwide occurred at a better pace. The first DAB-related standard was achieved for audio coding in 1993, when the InternationalOrganisation for Standardisation/International Electrical Commission (ISO/IEC)released the International Standard IS 11172-3 comprising MPEG/Audio Layers I, IIand III [IS 11172]. Also in 1993 ETSI adopted the basic DAB standard ETS 300 401, withseveral additional standards following later (now replaced by [EN 300401]). The ITU-Rin 1994 issued Recommendations [BS.1114] and [BO.1130] relating to satellite andterrestrial digital audio broadcasting, recommending the use of Eureka 147 DAB men-tioned as ‘Digital System A’. Consumer equipment manufacturers have also achievedseveral standards concerning the basic requirements for DAB receivers issued by theComite Europeen de Normalisation Electrotechnique (CENELEC) (for more detailedinformation see section 1.5).
Even though the technology, the norms and standards had been developed, the mostcritical issue was still not resolved: provision of frequency spectrum for DAB.WARC’88had allocated 40 MHz of spectrum in the L-band to satellite sound broadcasting,allowing also terrestrial augmentation. Through the intense intervention of severalnational delegations WARC’92 conceded primary terrestrial use of a portion of thatallocated spectrum, which for several countries is the only frequency resource available.The L-band – very well suited for satellite delivery of DAB – on the other hand becomesvery costly for terrestrial network implementation. VHF and UHF are much more costefficient than the terrestrial L-band. There was no hope of acquiring any additionalspectrum below 1 GHz outside of the bands already allocated to broadcasting.
So, in 1995 the Conference Europeenne des Administrations des Postes et desTelecommunications (CEPT) convened a spectrum planning conference for terrestrialDAB inWiesbaden, Germany, that worked out an allotment plan for DAB in VHFBandIII (mostly former TV Channel 12) and in the L-band from 1452 to 1467 MHz, allowingfor all CEPT member states two coverages of DAB, one in the VHF range, the other inthe L-band. This decision made possible the installation of experimental DAB pilotservices in many countries of Europe and the beginning of regular services starting in1997 with Sweden and the United Kingdom. More and more countries – also outside ofEurope – are following suit. As the available spectrum was not sufficient to move allexisting FM and future programmes to DAB, new frequency bands have been opened forDAB in a later step (see also Appendix 2).
1.4.2 Organisations and Platforms
A few of the organisations and bodies were or still are busy promoting and supporting thedevelopment and introduction of DAB system worldwide:
1.4.2.1 Eureka 147 Consortium
Asmentioned above the Eureka 147 consortiumwas the driving force in the developmentof DAB. It formed a Programme Board, dealing with strategic planning, contractual andlegal affairs, membership and promotion, a Steering Committee, planning the tasks ofthe working groups and making all technical decisions, and four working groups of
10 Digital Audio Broadcasting
![Page 42: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/42.jpg)
varying task assignments. DLR in Cologne, Germany, was chosen to act as the managingagency and as the project office for Eureka affairs.
While the original consortium did not accept newmembers at the beginning, this policywas changed when the basic specification of DAB [EN 300401] was ready to be releasedto the public for standardisation in 1992. The Eureka 147 Programme Board establishedrules for the entry of new partners into the consortium, requiring, for example, anentrance fee of DM 150,000 from industrial companies while entry for broadcastersand network operators was free of charge. The money earned from the entrance fees wasmainly reserved for system promotion and to a smaller extent for organisationalexpenses. In 1993 the first new members were admitted and soon the consortium grewto 54 members from 14 countries.
The research work of the original partners had led to a number of basic patents forDAB, individually held by several members. Consequently the consortium came to theconclusion to offer licenses as a package to all necessary intellectual property rights (IPR)through authorised agents, one for receiver matters and another for transmitter andmeasuring equipment.
In 1997 the idea of merging Eureka 147 with the promoting organisation World-DAB(see below) was discussed with the result that a gradual merger was adopted and the finalmerger completed by the beginning of the year 2000. The activities of the EU-147 ProjectOffice were transferred to the WorldDAB Project Office by the end of 1998. With thecomplete merger at the end of 1999 Eureka 147 ceased to exist. The members of theconsortium now cooperate in the Technical Committee of WorldDMB, where technicalissues of DAB, DAB+ and DMB are handled (see below).
1.4.2.2 National DAB Platforms
The first national DAB platform DAB Plattform e.V. was initiated by the GermanMinistry for Education and Research in 1991. Founded as a national platform it soonaccepted members from Austria and Switzerland and consequently dropped the word‘national’ from its name. It soon reached a membership of 52 organisations. The mainobjective of this platform was the promotion of the DAB system in German-speakingcountries. The organisation of and activities for DAB presentations at the IFA events inBerlin were highlights in the promotion programme of the German platform. Themembers decided to end the existence of DAB Plattform e.V. by autumn 1998 afterconsidering it to have achieved its objectives.
Likewise, national platforms were established in several other European countries.France launched theClub DAB France, The Netherlands the DutchDAB Foundation andthe United Kingdom the UK DAB Forum. Promotional activities for the public andinformation to governmental agencies were again the objectives.
1.4.2.3 EuroDAB/WorldDAB/WorldDMB Forum
Strongly stimulated and supported by the EBU, an organised cooperation of nationalplatforms and other interested bodies lead to the founding of the EuroDAB Forum in1995. A EuroDAB Project Office was set up at EBU Headquarters in Geneva.
Introduction 11
![Page 43: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/43.jpg)
Membership rose quickly, bringing together interested organisations not only fromEurope but from many parts of the world. Accordingly the General Assembly ofEuroDAB decided to change its name to the WorldDAB Forum in 1997. Promotion ofDAB is again the main objective. Formerly EuroDAB and now WorldDMB issue aquarterly DAB Newsletter. The Forum has organised all but the first International DABSymposiamentioned above. Technical, legal and regulatory as well as promotional issuesare dealt with in several modules of the Forum. Since January 2000 the Eureka 147consortium has fully merged with theWorldDABForum. TheWorldDABProject Officemoved fromGeneva to London in 1998 and has also acted for Eureka 147 since 1999. Anextensive web-site of WorldDAB and actual DAB or DMB information is maintained atthis office [www.WorldDAB]. Later on the WorldDAB Forum changed its name toWorldDMB Forum, an international non-government organisation whose objective itis to coordinate the implementation of all Eureka147-based technologies, such as DAB,DAB+ and DMB. It has expert committees on technical, regulatory and marketingissues, as two regional committees with emphasis to Europe and Asia. At the time ofwriting, more than 70 companies and organisations from more than 25 countriesworldwide were organised with the WorldDMB Forum.
1.4.2.4 WorldDMB Asia Committee
The Asian DAB Committee of the former WorldDAB Forum was formally establishedin June 2000 in Singapore. The main focus of the former AsiaDAB Committee was toraise awareness of DAB in Asia and to speed up the roll-out of DAB in this importantpart of the world. Nowadays, the WorldDMB Asia committee encourages cooperationand sharing of experiences on DAB matters as a part of the WorldDMB Forum. It is avaluable platform for industry players and regulators in the Asian marketplace. Formore details see [www.WorldDAB].
1.4.3 Milestones of Introduction
At the time of writing (autumn 2008) DAB and DMB – after almost 20 years’ develop-ment and standardisation – are operational radio broadcast systems in many countries ofthe world. However, in several countries still not all services are available on DAB andthe receiver market is rather small. Although DAB was primarily developed in theEureka 147 project as a European broadcast system, it can be shown already in thisphase that most of the industrially developed regions worldwide (i.e. Asia, Australia, andparts of America such as Canada and South America) are now going to introduce thishighly sophisticated universal broadcast system, too. For example, DMB providingvideo services to mobile and portable receivers has found much attraction in SouthKorea, where operational networks have been established. The worldwide penetrationof DAB is mainly supported by the WorldDAB respectively WorldDMB Forum.
The actual status of introduction can always be found at the web-site given below. Atthe time of writing, about 16 countries worldwide operate regular services in DAB orDMB, and about 30 additional countries are dealing with trial or test services. Althoughthe DAB system is still in a status of introduction, at this time over 500 million people
12 Digital Audio Broadcasting
![Page 44: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/44.jpg)
around the world can receive more than 1000 different DAB services using one of morethan 1000 different types of receivers available. (It is not practical to list any details here,because this will change significantly in a short time. For up-to-date information see[www.WorldDAB]).
Eureka147 DAB is also introduced in Canada, using the trade mark Digital RadioBroadcasting (DRB). Only in the important market places of United States and Japanhave proprietary digital radio systems been developed, see section 1.6.
1.5 International Standardisation
The DAB system family shows a very high level of standardisation in its principles andapplications, which is rather unusual for a new broadcasting or multimedia system.(There are more than 50 corresponding international standards and related documents.)
After the initial development by some broadcasters and related research institutes,the first international standards were passed by the ITU-R (InternationalTelecommunications Union, Radiocommunications Sector). In the period following,the system has been developed within the Eureka 147 project, supported by a widerepresentation of telecommunication network providers, broadcasters, receiver manu-facturers and related research institutes, in close cooperation with the EBU (EuropeanBroadcasting Union).
In the following some basic standards of the DAB system are listed. A more completelisting of the corresponding standards and related documents can be found in theBibliography, which is referred to within various parts of the text.
1.5.1 Basic Requirements and System Standards
The basic ITU-R Recommendation [BS.774] shortly specifies as ‘Digital system A’the main requirements to the new broadcasting system DAB. Other ITU-RRecommendations [BS.789] and [BO.1130] regulate conditions needed for additionalfrequency ranges for emission.
Several ITU World Administrative Conferences (WARC’79, WARC’85, WARC’88,WARC’92) dealt with digital radio and allocated frequency bands for satellite andterrestrial digital sound broadcasting. Detailed frequency plans for Europe and Asiawere developed at several CEPT planning meetings [CEPT, 1995], [CEPT, 2002a],[CEPT, 2007a] and an ITU-R Regional Radiocommunication Conference [RRC06,2006], see Chapter 7 and Appendix 2.
As a main result of developments within the Eureka 147 project, the DAB Standard orDAB Specification [EN 300401] was approved by the ETSI EuropeanTelecommunications Standards Institute, which defines the characteristics of the DABtransmission signal, including audio coding, data services, signal and service multiplex-ing, channel coding and modulation.
1.5.2 Audio Coding
DAB represents one of the most important applications of the generic MPEG-1Layer II audio coding scheme [IS 11172]. The use of this ISO/IEC coding
Introduction 13
![Page 45: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/45.jpg)
standard is recommended by the ITU-R in [BS.1115], and certainly in the DABSpecification [EN 300401]. DAB is also designed to transmit MPEG-2 Layer IIaudio [IS 13818], for instance for lower quality half-sample-rate transmission ormultichannel audio programmes, see also [ES 201755]. For the use with the DAB+or DMB systems newer coding schemes such as HE-AAC or SBR were standar-dised, see Chapter 3.
Other standards specify procedures and test bit-streams for DAB audio conformancetesting [TS 101757], or audio interfaces for transmission within the studio region[IEC 60958], [IEC 61937].
1.5.3 Data and Multimedia Services
Owing to the special needs for data services in DAB a new standard for MultimediaObject Transfer (MOT)was created defining the specific transport encoding of data typesnot specified in [EN 300401] and ensuring interoperability between different data servicesand application types or equipment of different providers or manufacturers. Additionalguidelines are given in the ‘MOT Rules of operation’ [TS 101497], ‘Broadcast Web-siteapplication’ [TS 101498] or ‘Slide show application’ [TS 101499]. An important bridgebetween the well-known radio data service RDS for FM [EN 50067] and the data servicesin DAB is provided by the European Norm [EN 301700] which defines service referen-cing from FM-RDS and the use of RDS-ODA (open data applications). A transparentdata channel for DAB transmission is described in [TS 101759]. Late standards weregiven for Internet Protocol (IP) datagram tunnelling [TS 101735] and for the DABElectronic Programme Guide (EPG) [TS 102818]. Of course, DAB is also consideredan important bearer for newer developments in traffic and traveller information such asTMC and TPEG.
After first trials and implementation in the 1990s, the DAB transmission systembecame an attractive candidate for mobile multimedia services – both MPEG andIP based – in the first decade of the new millennium. Consequently, the standardwas extended to carry MPEG transport streams and IP packets. A short historicalsummary focusing on these developments is provided in the introduction toChapter 9.
1.5.4 Network and Transmission Standards
Based on the DAB main standard [EN 300401] additional standards are given to definethe DABmultiplex signal formats for distribution (networking) and transmission. This isthe so-called Service Transport Interface (STI) [EN 300797] and [TS 101860] for con-tribution networks between service providers and broadcast studios, the EnsembleTransport Interface (ETI) [EN 300799], and the Digital baseband In-phase andQuadrature (DIQ) interface [EN 300798] for DAB channel coding using OFDMmodulation.
To provide interactive services, transport mechanisms for IP Datagram Tunnelling[ES 201735], Network Independent Protocols [ES 201736] and Interaction ChannelThrough GSM/PSTN/ISDN/DECT [ES 201737] are defined.
14 Digital Audio Broadcasting
![Page 46: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/46.jpg)
1.5.5 Receiver Requirements
Based on the DAB specification [EN 300401] additional standards are given to define theimplementation of DAB receivers. [EN 50248] describes DAB receiver characteristics forconsumer equipment for terrestrial, cable and satellite reception. Details are given inChapter 8. EMC parameters for receivers are identified in EACEM TR-004. [EN 50255]specifies the Receiver Data Interface (RDI) between DAB receivers and peripheral dataequipment. A special command set to control receivers is described in [EN 50320]. TheETSI Technical Report [TR 101758] lists general field strength considerations for a DABsystem. More general requirements to radio receivers concerning EMC are given in[EN 55013] and [EN 55020].
1.5.6 Guidelines for Implementation and Operation
In addition to the given standards, more detailed guidelines and rules for implementationand operation are compiled in [TR 101296] as a main guideline document for serviceproviders and manufacturers. A guide to standards, guidelines and bibliography is givenin the ETSI Technical Report [TR 101495]. A broadcaster’s introduction to the imple-mentation of some key DAB system features [BPN 007] is provided by the EBU.
1.6 Relations to Other Digital Broadcasting Systems
In addition to the European DAB system which is mainly covered by this book, severalother digital sound broadcasting services exist which have been or are being developedand (partly) introduced.
These systems differ in many aspects (specifications, service complexity, parameters)from theDAB concept. Some are focusedmore strongly on a single application or service(e.g. stationary reception) or provide lower audio quality levels (such as WorldSpace orDRM). Except for ISDB-T, which uses technologies very similar to DAB, all othersystems are not expected to be able to comply with the audio quality and quality ofservice in mobile reception provided by DAB. Nevertheless the basic concepts andlimitations of some of these systems will be introduced briefly.
Also, there are a few cable-based digital radio services, which are mainly derived fromexisting satellite or terrestrial radio systems (for instance, ADR, DVB, etc.) so it may notbe necessary to describe them separately. In general, those systems use QAM schemes inorder to achieve high data rates in the limited bandwidth of the cable. This is possiblebecause of the high signal-to-noise ratio available. However, these services have onlylocal importance, depending on the extension of the broadband cable distribution net-work used.
1.6.1 Satellite-based Digital Radio Systems
Although the DAB system can also be used for satellite transmissions, a number ofdifferent proprietary systems have been designed by companies providing direct broad-casting satellite services. Of course, many radio programmes are transmitted via
Introduction 15
![Page 47: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/47.jpg)
telecommunication satellites to feed relay transmitters or cable head stations. Thesesystems are beyond the scope of this section.
Generally, the system layout in the direct broadcasting systems focuses either onstationary reception with highly directive antennas (e.g. ‘dishes’) in the 11 GHz range(e.g. ADR) or on portable and possibly mobile reception in the L-band (1.5 GHz) andS-band (2.3/2.5/2.6 GHz) allocations (e.g. WorldSpace, XM and Sirius).
Historically, the first system for the direct satellite broadcasting of digital radioservices was Digital Satellite Radio (DSR). In contrast to later systems, no soundcompression was used but only a slight reduction in data rate as compared to CD byusing a scale factor. This service has recently been closed down because of the end of thelifetime of the satellite used (Kopernikus). Therefore, it is not described here. Moredetails can be found in [Schambeck, 1987].
The basic building blocks of modern satellite systems are audio coding, some kind ofmultiplexing, and modulation. While there are things in common with DAB with respectto the first two aspects, these systems do not use OFDMmodulation because of the non-linear travelling wave tube amplifiers on satellites and the low spectral efficiency. Instead,often relatively simple PSK schemes are used, which are considered sufficient because,when using directional receiving antennas, multipath propagation does not occur insatellite channels.
Satellite systems face severe problems when the service is to be extended to mobilereception. Because only line-of-sight operation is possible owing to the limited poweravailable in satellite transmissions, at higher latitudes, where geostationary satellites havelow angles of elevation, either terrestrial retransmission in cities and mountainousregions is necessary, or the service has to be provided by several satellites at differentazimuths in parallel to fill shaded areas. Another approach is to use satellites in highlyinclined elliptical orbits which always show high elevation angles. However, this requiresseveral satellites in the same orbit to provide continuous service and difficult switchingprocedures have to be performed at hand-over from the descending to the ascendingsatellite.
1.6.1.1 Astra Digital Radio
The Astra Digital Radio (ADR) system was designed by Societe Europeenne desSatellites (SES), Luxembourg, to provide digital radio on its geostationary direct TVbroadcasting satellites. This co-positioned family of satellites labelled ‘ASTRA’ coversCentral Europe operating in the 11 GHz range. Brief system overviews are given by[Hofmeir, 1995] or [Kleine, 1995]. A detailed description of the system is available at theASTRA web-site [www.ASTRA].
The system design is compatible with the sub-carrier scheme for analogue soundtransmission within TV transponders. It uses MPEG Layer II sound coding (as doesDAB) at a fixed bit rate of 192 kbps for a stereo signal. Forward error correction isapplied using a punctured convolutional code with code rate 3/4. The data are differen-tially encoded to provide easy synchronisation. QPSK modulation is used for each of upto 12 ADR sub-carriers which are combined with the analogue TV signal and are FMmodulated. The baseband bandwidth of the digital signal is 130 kHz which is the same as
16 Digital Audio Broadcasting
![Page 48: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/48.jpg)
for an analogue sound sub-carrier. This allows existing analogue radio services to bereplaced by the digital ADR service one by one. It is also possible to use a wholetransponder for ADR only. In this case, 48 channels can be accommodated in onetransponder.
Additional data can be sent together with the audio signal. ADR uses the auxiliarydata field of the MPEG audio frame to do this, but the coding is different from the DABProgramme Associated Data (PAD; see Chapter 2). ADR uses 252 bits per audio framefor this purpose, which results in a net data rate of about 6 kbps, because a (7,4) blockcode is used for error correction. This capacity is flexibly split into ‘RDS data’, ‘AncillaryData’ and ‘Control Data’. RDS data are coded in the format of the RDS [EN 50067]which is used on a digital sub-carrier on FM sound broadcasts and provides service-related information such as labels and Programme Type (see also section 2.5). The reasonfor using this format on ADR is that several broadcasters use ADR to feed theirterrestrial FM networks. Hence these data can be extracted from the ADR signal andfed to the RDS encoder of the FM transmitter. Ancillary data are used by the broadcasterfor in-house purposes. The control data field contains a list of all ADR channels toprovide easy tuning and allows transmission of parameters for conditional access ifapplied.
With respect to DAB, ADR in principle provides the same quality of audio, becausethe same coding mechanism is used. The number of channels available, however, is muchlarger. While DAB currently only provides six to seven services in each network, ADRcan provide 12 digital radio channels on each transponder in addition to a TV channel.Therefore, several hundred channels are available and in use by public and privatebroadcasters from all over Europe. ADR decoders are integrated in high-end satelliteTV receivers and are therefore widespread. Themost important drawback of ADR is thatit can only be received with stationary receivers using a dish antenna. The flexibility of thesystem with respect to data transmission and future multimedia extensions is consider-ably lower than that of DAB.
1.6.1.2 WorldSpace
TheWorldSpace digital radio systemwas designed by the US companyWorldSpace Inc.,to provide digital radio to developing countries on its two geostationary satellites‘AfriStar’ covering Africa, Southern Europe and the Near and Middle East, and‘AsiaStar’ covering India, China, Japan and South East Asia. A third satellite named‘CaribStar’ is intended to cover Central and South America but has not yet beenlaunched. The system downlink operates in the L-band. The standard is not public.A description is given by [Sachdev, 1997], for example.
The basic building blocks of the systems are ‘Prime Rate Channels’ (PRCs) which eachtransmit 16 kbps of data. Several of these (typically up to eight, resulting in 128 kbps) canbe combined to provide a stereo sound channel or data channels. For audio coding,MPEG-1 Layer III (MP3) is used.
Each satellite serves three coverage areas (spots). For each spot, two multiplex signalscontaining 96 PRCs (i.e. 12 stereo channels) each in a time domain multiplex (TDM) areavailable. Each of these data streams is QPSK modulated. One multiplex is completely
Introduction 17
![Page 49: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/49.jpg)
assembled in a ground station and linked up to the satellite from which it is retransmittedwithout further processing. The other multiplex is processed on board the satellites byassembling individual PRC uplinks to the TDM signal. The advantage of this is thatthere are no additional costs to transport the signal from the broadcaster to the uplinkstation. Moreover, a signal can be broadcast in several spots with only one uplink.
Owing to the lower path loss of the L-band signals as compared to 11 GHz, theWorldSpace system is able to provide significant field strength within the coveragearea. Therefore reception is possible with portable receivers outdoors and inside build-ings using a low-gain patch or helical antenna at a window where line-of-sight conditionsapply. Minor attenuation by foliage or trees may be tolerable.
With respect to DAB, WorldSpace addresses a completely different broadcastingenvironment. Clearly, in developing countries digital satellite radio will considerablyimprove the number and quality of broadcast receptions, because in many parts up tonow there has only been short-wave coverage.Mobile reception is probably not an urgentneed and hence the system is not particularly designed for it.
From the point of view of audio quality, by using MPEG Layer III at 128 kbps thequality will be comparable to that of DAB at 160 to 192 kbps. At this bit rate, however,the number of channels per spot is restricted to 24. Owing to the large coverage areas thisnumber may not be sufficient to serve the multilingual and multiethnic audience. Hence,the audio bit rate will have to be reduced in order to increase the number of channelsavailable. Nevertheless the sound quality will in many cases still be comparable at least tomono FM, which is still a major improvement on short-wave AM.
Utilising the concept of PRCs the system is very flexible and can be extended to datatransmission and multimedia contents. This is important because the lifetime of thesatellites is approximately 15 years.
1.6.1.3 Satellite Systems in the United States
In the United States there is no allocation for digital radio in the L-band, but in theS-band. Originally, two companies have established satellite services targeted at mobilereception and covering the whole of the continental United States (i.e. except Alaska andHawaii). Sirius Satellite Radio uses three satellites on inclined orbits to achieve highelevation angles and terrestrial repeaters in metropolitan areas, see [www.Siriusradio].The other company, XM Satellite Radio, uses two high-powered geostationary satellitesat 85�W and 115�W which both cover the entire continental United States and thusprovide spatial diversity to overcome shading, see [www.XMRadio]. Neverthelessterrestrial retransmitters are also widely used, in particular in metropolitan andmountainous areas. In 2007, both companies merged.
The systems provide approximately 100 audio channels in a quality comparable to CD.The services are pay-radio based on a monthly subscription fee. With respect to soundquality these systems should be comparable to DAB, and with respect to reliability ofservice these systems should be comparable to WorldSpace; however, because of themeasures taken they should show better performance in mobile and portable reception.The number of subscribers to these systems has reached almost 20 million at the time ofwriting.
18 Digital Audio Broadcasting
![Page 50: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/50.jpg)
1.6.2 Terrestrial Digital Broadcasting Systems
1.6.2.1 Digital Video Broadcasting – Terrestrial (DVB-T)
The DVB system was developed a few years after the DAB system. On the audio andvideo coding level as well as on the multiplexing level, it is completely based on theMPEG-2 standard. This is in contrast to the DAB standard, where the audio coding isMPEG, but the multiplex control is independent and specially adapted for the require-ments. There are three DVB standards that differ very much in the transmission scheme:DVB-S for satellite [EN 300421], DVB-C for cable [EN 300429], and DVB-T for terres-trial broadcasting [EN 300744]. Here we consider only the last one. For a detaileddescription of all three standards, see [Reimers, 1995].
The DVB-T standard has been designed for stationary and portable terrestrial recep-tion with multipath fading. In contrast to DAB, mobile reception was not required. Onthe coding and modulation level, many methods have been adopted from the DABsystem, where they had already been implemented successfully.
Like DAB, DVB-T uses OFDM with a guard interval. There are two transmissionmodes. The first is called 8Kmode (because it uses an 8192-point FFT) and has a symbollength of the same order as in DAB transmission mode I. It is suited for single frequencynetworks. The second is called 2K mode (because it uses a 2048-point FFT) and has asymbol length of the same order as in DAB transmission mode II. It is not suited forsingle frequency networks. The guard interval can be chosen to be 25% of the totalsymbol length, as for DAB, but also shorter guard intervals are possible. The totalbandwidth of about 7.6 MHz is suited for terrestrial 8 MHz TV channels. The systemparameters can be scaled for 7 MHz TV channels. A major difference from the DABsystem is that DVB-T uses coherent modulation. Different signal constellations betweenQPSK and 64-QAM are possible. At the receiving side, the channel amplitude and phasehave to be estimated. For channel estimation, nearly 10% of the total bandwidth isneeded for pilot symbols. The coherent modulation scheme with channel estimation by aWiener filter is more advanced than the differential demodulation scheme of DAB. It iseven more robust against fast fading in mobile reception situations [Hoeher, 1991a],[Schulze, 1998], [Schulze, 1999].
The OFDM transmission scheme for DVB-T includes a frequency interleaver thatconsists of a simple pseudo-random permutation of the sub-carrier indices. It is verysimilar to the DAB frequency interleaver. In contrast to DAB, the DVB-T system has notime interleaving. Time interleaving only makes sense for mobile reception, which wasnot a requirement for the design of the system.
The channel coding is based on the same convolutional codes like the DABsystem. Code rates between 1/2 and 7/8 are possible. Unequal error protection(UEP) is not possible for the DVB system, since the data and transmission levelare completely separated. As a further consequence, in contrast to DAB, the wholemultiplex has to be coded with the same code rate. To reach the very low bit errorrates that are required for the video codec, an outer Reed–Solomon (RS) code isapplied: blocks of 188 bytes of useful data are coded into blocks of 204 bytes.Between the outer RS code and the inner convolutional code, a (relatively) shortbyte interleaver has been inserted to break up the burst errors that are produced bythe Viterbi decoder.
Introduction 19
![Page 51: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/51.jpg)
The data rates that can be carried by the DVB-T multiplex vary from about 5Mbps toabout 30 Mbps, depending on the modulation (QPSK, 16-QAM or 64-QAM), the coderate (1/2, 2/3, 3/4, 5/6 or 7/8) and the guard interval.
In the meantime DVB-T2 has been developed [EN 302 755]. It includes further optionsfor the configuration of the OFDM parameters (including a 1k, 4k, 16k and 32kMode inaddition to the 2k and 8k Mode of DVB-T and additional choices for guard intervallength) and uses advanced error correction codes.
Mobile reception of DVB-T, even though not a specific design feature, has been widelydiscussed and gave rise to many theoretical investigations and practical experiments.Furthermore, there seems to be a controversy between DAB and DVB adherents thatconcentrates verymuchon this question.Unfortunately, even thoughboth systems are veryclose together, the chance has beenmissed to design a universal common system. From thetechnical point of view, we will list some comments on the question of mobile reception:
1. Unlike as one might expect, the differential modulation of DAB is not more robustthan the coherent modulation for DVB even for severely fast-fading mobile reception.The coherent scheme is more robust and spectrally more efficient, see [Schulze, 1999].
2. For mobile reception in a frequency flat fading situation, the frequency interleavingeven over a relatively wide band of 8MHz is not sufficient. As a consequence, the lackof time interleaving may severely degrade the system in some mobile reception situa-tions, see [Schulze, 1998].
3. Synchronisation losses may sometimes occur for mobile receivers. In contrast toDVB-T, this was taken into account in the design of the DAB system: the null symbolallows a rough frame and symbol synchronisation every 24 ms or a maximum of96 ms. The FIC (see section 2.2.2.) can then immediately be decoded and provides theinformation about the multiplex structure. And, in the (typical) streammode, the datastream does not need separate synchronisation because it is synchronised to thephysical frame structure.
4. Bit errors in the scale factors of the MPEG audio data (birdies) are very annoying forthe human ear. For a subjective impression this is much worse than, say, block error ina picture. The DAB system uses an extra CRC (that is not part of the MPEG bit-stream) to detect and to conceal these errors. This is not possible for DVB-T.
As a consequence, the DVB-T system allows mobile reception in many typical envir-onments, but it may fail in some situations where more care has been taken in the DABsystem.
To remedy the shortcomings of DVB-T with respect to portable and mobile receptionof television and multimedia services within the DVB system family, DVB-H was devel-oped [EN 302304]. Besides improvements in the transmission system itself (additionalinterleaving and forward error correction) it allows for time slicing of the applications toreduce the power consumption of portable devices. It can co-exist with DVB-T-servicesin one channel and hence allows services targeted to portable and mobile devices to beoffered and – with higher data rate – for fixed receivers in the same channel. A compar-ison of DVB-H and DAB in particular with respect to features relevant to mobilereception is given by [Sieber, 2004]. Economic aspects of this comparison are coveredby [Skiold, 2006] and [Weck, 2006].
20 Digital Audio Broadcasting
![Page 52: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/52.jpg)
1.6.2.2 In-Band-On-Channel Systems
In the United States the broadcasting environment is considerably different from theEuropean one. Technical parameters of the stations (AM or FM, power, antenna height)resulting in different coverage areas and quality of audio service appear to be importanteconomic factors that are vital to the broadcasters and whichmany of them think have tobe preserved in the transition to a digital system. Although the DAB system can providesuch features to a certain extent by applying different audio data rates and codingprofiles, the idea of multiplexing several stations into one transmitting channel doesnot seem to be very attractive to some US broadcasters.
In the early 1990s, a number of US companies therefore started to work onalternative approaches to digital audio radio (DAR) broadcasting known as IBOC(In-Band-On-Channel) and IBAC (In-Band-Adjacent-Channel). Systems were devel-oped both for AM and FM stations in MW and VHF Band II. The basic principle isto use low-power digital sideband signals within the spectrum mask of the channelallocated to the station.
Later in the 1990s a number of IBOC/IBAC systems and the Eureka 147 DAB systemand a satellite-based system (VOA/JPL) were tested in both the laboratory and field inthe San Francisco area. The results of these tests were not encouraging for the IBOC/IBAC approaches, see [Culver, 1996], stating explicitly that ‘of all systems tested, only theEureka 147/DAB system offers the audio quality and signal robustness performance thatlisteners would expect from a new DAR service’. Since then work on IBOC systems hasnevertheless continued. At the time of writing (2008), standards both for FM and AMIBOC systems have been issued and the system is in the market in the US.
The system designed for Medium Wave (‘AM IBOC’) has two basic configurations[Johnson, 2003]. The first is designed to be used in parallel to the analogue AM signal.It has OFDMblocks on either side of the AM carrier (even in the frequency band used bythe AM side bands). However, the modulation and power level is different for thesubcarriers depending on the frequency offset from the carrier. The carriers near to theAM carrier are QPSK modulated, those more than about 4 kHz from the carrier use16-QAM and those more than 9.5 kHz from the carrier use 64-QAM. These have thehighest power and carry most of the data. The total bandwidth of the signal is 29.4 kHz.This means that the digital transmission is not really on-channel but uses both adjacentchannels for the original transmission. Therefore, the digital signal can only be broadcastduring daytime, when there is no sky wave propagation. In a situation where no analogueAM transmission is required, the whole channel can be used for the digital transmission.In this case, the unmodulated AM carrier is still transmitted but the AM channel is filledwith the 64-QAM modulated OFDM carriers.
The FM IBOC system [Peyla, 2003] is designed in a similar way. There is a hybridmodewhere two OFDM blocks are sent on either side of the band used by the analogue FMsignal. They extend from –129 kHz to –198 kHz, respectively and both carry the samedigital information. The digital part of the signal can be extended by adding furtherOFDM carriers between – 101 kHz and – 129 kHz. If there is no analogue FM signal, theinner part of the channel can also be filled with the digital transmission resulting in anOFDM block consisting of 1092 carriers in a band 396 kHz wide. In all cases, the twodigital side bands carry identical data to increase the robustness of the system.
Introduction 21
![Page 53: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/53.jpg)
Both the FM and AM IBOC systems use PAC as the audio coding system. However,independent of the individual system details there are two principle problems with theFM IBOC approach which are difficult to overcome.
Owing to the fact that the FM IBOC signal is limited in bandwidth to the FCC channelspectrummask, the bandwidth is not sufficient to overcome frequency-selective fading inthe VHF frequency range. This means that in portable or mobile reception a fade of thewhole signal can occur. In this case there is hardly a chance to reconstruct the signal evenif strong error correction codes and ‘long’ interleaving are used (think of stopping at atraffic light). Therefore, from the point of view of coverage, IBOC systems are notexpected to be superior to FM, because they will fail in the same locations as FM does.In the FM IBOC system it is proposed to delay the analogue signal against the digital oneand store it in the receiver. Whenever the digital transmission fades, the receiver wouldblend to the analogue signal.
Every IBOC signal will to a certain extent impair the analogue signal in the samechannel and in adjacent channels. The effect of this is additional noise on the analogueaudio signal and this may affect different analogue receiver circuits in different ways.Therefore the broadcaster has no control of what the digital signal will do to all thedifferent analogue receivers being used. To keep this noise sufficiently low, the digitalsignal level must be kept far below the level of the analogue signal, e.g. 23 dB below thepower of the FM carrier in iBiquity’s FB IBOC system. Although the digital systemrequires less signal-to-noise ratio than FM, this means that the coverage of IBOC will bevery limited.
The system is well introduced in the US and field trials are under way also in othercountries [Joachim, 2008].
1.6.2.3 Integrated Services Digital Broadcasting (Japan)
In Japan, the NHK Science and Technical Research Laboratories have proposed aconcept called Integrated Services Digital Broadcasting (ISDB). From this approach asystem was created which can be configured for terrestrial and satellite broadcasts ofradio, TV and multimedia services, see [Kuroda, 1997], [Nakahara, 1996], [ARIB, 1999].For the terrestrial system (ISDB-T) the most important aims are rugged reception withportable and mobile receivers, use of Single Frequency Networks (SFNs) to achievefrequency efficient coverage and to have a flexible scheme in order to be future-proof. Toachieve this, a variant of OFDM (see section 2.2) was developed which is called BandSegmented Transmission (BST)-OFDM andmeans that each signal consists of a numberof basic OFDMbuilding blocks called segments with a bandwidth of 571, 500 or 428 kHz(in TV channels with 8, 7 and 6 MHz bandwidth) which are spread over the band wherefrequencies are available. For the OFDM parameters of the system there are three sets ofparameters that are similar to transmission modes I, II and IV of the DAB system. Thesystem may be configured for channel bandwidth of 6, 7 or 8MHz resulting in a segmentbandwidth.
A single segment is sufficient to broadcast audio programmes and data, but it is alsopossible to combine three segments for this purpose. For TV signals 13 segments arecombined to form a 7.4/6.5/5.6 MHz wide signal. In all cases the basic modulation and
22 Digital Audio Broadcasting
![Page 54: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/54.jpg)
coding modes of the segments are (D)QPSK, 16QAM and 64QAM, and several codesrates between 1/2 and 7/8 are available. In the 3 and 13 segment modes the individualsegments may be coded and modulated in different ways to achieve hierarchical trans-mission capacity. For the audio and video coding the MPEG-2 standard will be usedincluding AAC for sound transmission.
In 1998 draft standards on digital terrestrial television and radio based on the ISDB-Tconcept were established, see [STRL, 1999], and field tests are being performed. Testtransmissions took place in Tokyo and Osaka in late 2003.
From the point of view of the relation to DAB, ISDB-T basically uses the sameprinciples and hence provides similar features as do DAB and DVB-T, respectively. Byusing the MPEG-2 standard for coding, the audio and video quality will be comparable.Due to the use of AAC for audio coding, however, the number of audio services whichcan be provided in a given bandwidth will be approximately twice that provided byDAB.Owing to the similarity of the OFDM parameters used, and similar bandwidth (at leastwhen three segments are combined for audio), the coverage properties will also be similarto those ofDAB. The advantage of ISDB-T is that the radio and TV systems are based onthe same basic building blocks (although the coding and modulation will be different),which allows for reuse of some circuits in receivers, whereas DAB and DVB-T differ inmany details. Another advantage of ISDB-T is the availability of a narrow-band mode(i.e. a single segment) which can deliver one or two radio programmes to small regions orcommunities, although potentially with some reception problems due to flat fading.Withthis segmentation ISDB-T can also flexibly use the frequencies not occupied by analogueservices in the introductory simulcast phase. Such possibilities are not present in DAB.
1.6.3 Digital Radio Mondiale (DRM)
1.6.3.1 DRM in the Broadcasting Bands below 30 MHz
The frequency range below 30 MHz (short, medium, long wave) offers the possibility toprovide a very large coverage area for broadcasting with only one high-power transmitterand very simple receivers with no directional antennas. Using this frequency range is theeasiest – and often practically the only possible – way to cover large countries with lowtechnical infrastructure. On the other hand, traditional broadcasting in this frequencyrange uses the most antiquated and simplest possible transmission scheme: double-side-band AM with a carrier. From one point of view this is a waste of power and bandwidthefficiency in such a valuable frequency range at a time when every year more and moreefficient communication systems are being designed. From a practical point of view, thisold technique provides only very poor audio quality and thus finds acceptance only inregions where no other service is available.
The obvious need for a more advanced system working in this frequency range gaverise to a consortium called Digital Radio Mondiale (DRM) to develop a worldwidestandard for such a system.
The DRM standard [ES 201980] was first published as a European Telecommuni-cations Standard and has now been approved by ITU-R and IEC. Overviews of the basicsystem features are given e.g. by [Stott 2001] and [Hofmann, 2003], latest information isavailable from [www.DRM].
Introduction 23
![Page 55: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/55.jpg)
The available bandwidth in the frequency range below 30 MHz is typically very small:the usual channel spacing is 5, 9 or 10 kHz. For the new system, it should be possible tobundle two 5 kHz channels to one 10 kHz channel. For such narrow-band channels,much more data reduction is required than for the DAB system. The Advanced AudioCoding (AAC) data reduction scheme of MPEG in conjunction with a newer techniquecalled Spectral Band Replication (SBR) (see also section 3.2.4) allows for an audio qualitycomparable to FM at a data rate between 20 and 25 kbps, see for example [Dietz, 2000].This is a great improvement compared to conventional AM quality. But bearing in mindthat the DAB system typically transmits little more than 1 Mbps (e.g. six audio pro-grammes of 192 kbps) in a 1.5 MHz bandwidth, even this low data rate is relatively highcompared to the extremely small bandwidth of 10 kHz. This means that the DRMtransmission scheme must provide more than twice the bandwidth efficiency comparedto DAB.
The physical channel depends on the type of wave propagation, which is very special inthis frequency range. It differs from night to day and it depends on the solar activity. Alsointerference caused by human noise plays an important role. In situations where onlyground-wave propagation is present, there is a simple white Gaussian noise channel thatis relatively easy to handle. But typically the wave propagation is dominated by iono-spheric scattering (sky wave). This means that the channel is time and frequency variant –just like the mobile DAB channel (see section 2.1). Travel time differences of the wave ofthe order of several ms may occur which cause severe frequency-selective fading. Themotion of the ionosphere causes a time variance in the channel with a Doppler spectrumwith a typical bandwidth in the order of 1 Hz.
The DRM channel has similar problems in time-and frequency-selective fading as theDAB channel, so the DRMgroup decided on the same solution: OFDM (see section 2.1).The parameters, however, are totally different from the ones used in DAB because thechannel characteristics are quite different. For sky wave propagation there are severalmodes with the OFDM symbol durations of 26.67 ms, 20 ms and 16.67 ms and guardintervals of 5.33ms, and 7.33ms, respectively.With this symbol length, theOFDMsignalconsists of approximately 200 sub-carriers in a 10 kHz wide channel. The requirement ofa very high-bandwidth efficiency leads to amuch higher signal constellation for each sub-carrier than used for DAB. 64-QAM or 16-QAMwill be used depending on the propaga-tion situation. Because of the very large time variance of the channel, a large amount ofthe total bandwidth (up to about 1/6) is needed for channel estimation pilots. The overallcode rate is between 1/2 and 2/3 for the required data rate. It can be shown [Schulze, 1999]that such a coded 64-QAMOFDM system with a good channel estimator is surprisinglyrobust in a fading channel even with conventional 64-QAM symbol mapping. For DRMit has been decided to use the multilevel coding approach first proposed by [Imai, 1977].This approach is very similar to that described by [Worz, 1993] for a coded 8-PSK system.With multilevel 64-QAM, an additional gain of up to 1 or 2 dB can be reached comparedto conventional 64-QAM. DRM is the first system that implements such a codedmodulation scheme; see also [Dietz, 2000]. The same convolutional codes as DAB willbe used here.
For ground mode propagation, another transmission mode is defined, because lesschannel estimation is needed, the guard interval is only 2.33 ms long, and even weakercodes can be used in a Gaussian channel to allow for a higher data rate.
24 Digital Audio Broadcasting
![Page 56: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/56.jpg)
Channel coding must be supported by interleaving to work in a fading channel.Frequency interleaving alone is not sufficient, especially if the echoes are too short or ifonly a two-path propagation situation occurs. Time interleaving is restricted by the delaythat is allowed by the application: after the receiver has been switched on the listenercannot wait too long for a signal. A delay of 2 seconds is used for sky wave modes, and adelay of 0.5 s is used in ground wave. Since the time variance is very slow (1 Hz Dopplerspread), the interleaving will not be sufficient in many situations.
1.6.3.2 DRM in the VHF Bands
In the course of the development of DRM it became clear that the system developed forthe bands below 30 MHz could not be used in the VHF range. However, a demand wasseen for a VHF capable system sharingmany features withDRM to allow for a combinedintroduction of a digital system for all traditional sound broadcasting bands. Within theDRM consortium a system specification called DRM+ was developed which is in theprocess of field testing [Steil, 2008] and standardisation within the DRM standard as anew mode ‘E’ at the time of writing.
With DRM it shares MPEG-4 AAC+ audio coding, the multiplexing structure,service signalling etc. The most prominent difference of course is in the OFDM para-meters. DRM+ has a bandwidth of 96 kHz and a symbol duration of 2.5 ms, with a0.25 ms guard interval. This choice of parameters allows operation of single transmittersand single frequency networks in all VHF broadcasting bands upto 108 MHz. With netdata rates of up to 286 kbps DRM+ is capable to carry up to four high quality audioservices, the main focus, however, is on a single service per frequency.
1.6.4 Internet Radio (Web-casting)
A completely different way to provide radio services is the use of the Internet as auniversal multimedia platform. That means, Internet radio – nowadays often calledWeb-casting – is a multimedia extension of the Internet. Audio and video signals canbe digitised into a file or stream of data, which can easily be distributed over the existingInternet structures. The term Web-casting means the publishing of audio and video filesor streams on web-sites, for live and/or on-demand delivery to the general public.
Amain function of broadcaster’s web-sites is to support the core radio and TV servicesin order to make them more attractive to the customer. The basic equipment for anInternet radio customer is a PC, complete with a sound adapter, a rather fast modem andInternet access, possibly via ISDN or ADSL. But also special ‘Internet radio players’ inthe shape of a normal radio receiver are available that connect to Internet radio stationsby Wireless LAN and high speed Internet access.
The availability of improved and scaleable audio coding schemes, on the other hand, iscreating the opportunity for a better definition of audio quality obtainable via the Web.The Internet’s impact on broadcasters has changed from its initial position as a site forposting information related to the station and programme to an additional medium toreach new customers through streaming audio, live or on-demand, still and movingpictures, and new interactive concepts. The importance of Internet audio services,
Introduction 25
![Page 57: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/57.jpg)
which are using only a small part of the capacity of the Net, is already significantlyincreasing audio information delivered via IP. Several software companies have pro-duced the necessary tools to distribute audio and video via the Internet with the goal todevelop the Web as a new mass medium, similar to the traditional audio and videobroadcasting services.
For both, either for live streaming or downloading of audio clips, there are severalaudio players (software codecs) in use which can provide sufficient audio quality. Themost common way to distribute Internet radio is via streaming technology using a lossyaudio codec. Popular streaming audio formats use MP3 (close to MPEG-1/2 Layer III),Ogg Vorbis, Windows Media Audio, RealAudio and MPEG-2/4 HE-AAC (sometimescalled aacPlus, see also section 3.2.3). The bits are ‘streamed’ (transported) over thenetwork in TCP or UDP packets, then reassembled and played within seconds.
The advent of such a large number of audio codecs as mentioned above has brought aradically new approach to standardisation: standards have become less important for theInternet transmission technology, since decoders (which are normally simple and do notrequire a lot of processing power) are downloadable to the client machine along with thecontent.
Therefore, in the Internet environment there is no longer a need for a single codingsystem as is the case in conventional broadcasting. Service providers decide which codingscheme to use. One of the advantages of this ‘deregulated’ approach is that decoders canbe regularly updated as the technology advances, so the user can have the latest version ofthe decoder all the time.
Simulcast is a portmanteau of ‘simultaneous broadcast’, and refers to programmes orevents broadcast across more than one medium, or more than one service on the samemedium, at the same time. For example, Virgin radio is simulcast on both AM and onsatellite radio, and the BBC’s Prom concerts are often simulcast on both BBC radio andBBC television. Another application is the transmission of the original-language sound-track of movies or TV series over local or Internet radio, with the television broadcasthaving been dubbed into a local language.
Apart from Internet radio, a so-called podcast is a series of audio or video digital-media files which is distributed over the Internet by download, through Web feeds, toportable media players or simply to a PC. Podcast is distinguished from other digital-media formats by its ability to be subscribed to, and downloaded automatically whennew content is added. The term is a portmanteau of the words ‘iPod’ and ‘broadcast’, asthe Apple iPod being the brand of portable media player for which the first podcastingscript was developed.
The business model of audio streaming is likely to change due to the advent of multi-casting. Today, ISPs charge per audio stream. In multicasting situations, however, asingle stream will be delivered to several users. The user will then be charged according tothe occupancy of the servers used. Due to the huge competition in the audio decodermarket, audio streamers will be increasingly available for free.
With current audio codecs and streaming techniques high audio quality can beachieved and many broadcasters provide streams of up to approximately 100 kbpswhich provide almost CD quality. Even high quality 5.1 surround sound was alreadydemonstrated [Kozamernik, 2006]. Internet radio, respectively web-casting, has con-quered its own place in the radio world because of the access to hundreds of radio
26 Digital Audio Broadcasting
![Page 58: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/58.jpg)
programmes worldwide. The drawback is that high speed links with flat rate marketingmodels are currently only available for fixed installations. Mobile usage of high speedInternet access using 3G mobile communication networks is still limited and expensive.It can be expected that Internet radio will become increasingly popular when Internetaccess will become cheaper on portable and mobile devices.
More detailed information on web-casting and its audio quality expectations iscontained in [BPN 022], [BPN 035] and [Stoll, 2000]. The necessary InternetTransport protocols and delivery technologies are described in [Kozamernik, 2002],[Kozamernik, 2005].
Introduction 27
![Page 59: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/59.jpg)
2
System Concept
2.1 The Physical Channel
Mobile reception without disturbance was the basic requirement for the development ofthe DAB system.
The special problems of mobile reception are caused by multipath propagation: theelectromagnetic wave will be scattered, diffracted, reflected and reaches the antenna invarious ways as an incoherent superposition of many signals with different travel times.This leads to an interference pattern that depends on the frequency and the location or –for a mobile receiver – the time.
The mobile receiver moves through an interference pattern that changes within milli-seconds and that varies over the transmission bandwidth. One says that the mobile radiochannel is characterised by time variance and frequency selectivity.
The time variance is determined by the vehicle speed n and the wavelength l¼ c/f0where f0 is the transmission frequency and c the velocity of light. The relevant physicalquantity is the maximum Doppler frequency shift:
fDmax¼v
cf0 »
1
1080
f0
MHz
v
km=hHz ð2:1Þ
Table 2.1 shows some practically relevant figures for fDmax.The actual Doppler shift of a wave with angle � relative to the vector of the speed of the
vehicle is given by
fD ¼ fDmax cos ð�Þ: ð2:2Þ
Typically, the received signal is a superposition of many scattered and reflected signalsfrom different directions so that we may speak not of a Doppler shift but of a Dopplerspectrum. The most popular Doppler spectrum is the Jakes spectrum that corresponds tothe isotropic distribution of � (see e.g. [Schulze, 2005], p. 58). Figure 2.1 shows anexample of a received VHF signal level for a fast-moving car (n¼ 192 km/h) as a functionof the time for a carrier wave of fixed frequency f0¼ 225 MHz.
Digital Audio Broadcasting: Principles and Applications of DAB, DAB+ and DMB, Third Edition Edited by W. Hoeg and T. Lauterbach© 2009 John Wiley & Sons, Ltd. ISBN: 978-0-470-51037-7
![Page 60: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/60.jpg)
The superposition of Doppler-shifted carrier waves leads to a fluctuation of the carrieramplitude and the phase. This means the received signal has been amplitude and phasemodulated by the channel. Figure 2.2 shows the trace of the phasor in the complex plane.For digital phase modulation, these rapid phase fluctuations cause severe problems if thecarrier phase changes toomuch during the timeTS that is needed to transmit one digitallymodulated symbol. Amplitude and phase fluctuate randomly. The typical frequency ofthe variation is of the order of fDmax. Consequently, digital transmission with symboltime TS is only possible if
fDmax Ts << 1 ð2:3Þ
The frequency selectivity of the channel is determined by the different travel times of thesignals. They can be calculated as the ratio between the travelling distances and thevelocity of light. Table 2.2 shows some typical figures.
Travel time differences of some microseconds are typical for cellular mobile radio. Fora broadcasting system for a large area, echoes up to 100 ms are possible in a hilly or
Table 2.1 Examples for Doppler frequencies
fDmax v¼ 48 km/h v¼ 96 km/h v¼ 192 km/h
f0¼ 225 MHz 10 Hz 20 Hz 40 Hzf0¼ 900 MHz 40 Hz 80 Hz 160 Hz
f0 ¼ 1500 MHz 67 Hz 133 Hz 267 Hz
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1−35
−30
−25
−20
−15
−10
−5
0
5
10
Time [s]
Lev
el [
dB
]
Figure 2.1 Time variance of multipath fading
30 Digital Audio Broadcasting
![Page 61: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/61.jpg)
mountainous region. In so-called single frequency networks (see Chapter 7), the systemmust cope with even longer echoes. Longer echoes correspond to more fades inside thetransmission bandwidth. Figure 2.3 shows an example of a received signal level as afunction of the frequency at a fixed location where the travel time differences of thesignals correspond to several kilometres. In the time domain, intersymbol interferencedisturbs the transmission if the travel time differences are not much smaller thanthe symbol duration TS. A data rate of 200 kbps, for example, leads to TS ¼ 10 ms forthe QPSK (Quadrature Phase-Shift Keying) modulation. This is of the same order as theechoes. This means that digital transmission of that data rate is not possible withoutusing more sophisticated methods. Known techniques are equalisers, spread spectrumandmulticarrier modulation. Equalisers are used in the GSM standard. The data rate forDAB is much higher than for GSM and the echoes in a broadcasting scenario are muchlonger than in a cellular network. This would lead to a higher complexity for theequaliser. Spread spectrum is spectrally efficient only for cellular networks where it isused as multiple access (CDMA), as in the UMTS standard, see e.g. [Schulze, 2005]. ForDAB it was therefore decided to use multicarrier modulation, because it is able to copewith very long echoes and it is easy to implement.
Qu
adra
-tu
re
Inphase−2 −1.5 −1 −0.5 0 0.5 1 1.5 2
−2
−1.5
−1
−0.5
0
0.5
1
Figure 2.2 Time variance as a curve in the complex plane
Table 2.2 Examples for travel times of the signal
Distance 300m 3 km 30 km
Time 1 ms 10 ms 100 ms
System Concept 31
![Page 62: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/62.jpg)
Further propagation related aspects which are relevant for DAB are covered inChapter 7. For a more detailed treatment of the mobile radio channel, we refer totextbooks like [Schulze, 2005], [Benedetto, 1999], [Proakis, 2008], [Kammeyer, 2008]and [David, 1996].
2.2 The DAB Transmission System
In the DAB transmission system several advanced techniques are implemented, such asOFDM multicarrier modulation, rate-compatible punctured convolutional (RCPC)codes, and time-frequency interleaving. In the context of the development of DABþ(see section 3.4.2) and DMB (see Chapter 9) further the technique of concatenating theRCPC codes with Reed-Solomon (RS) – Codes was adopted. Here we only give a briefoverview of the techniques applied in the DAB transmission system. A more detaileddiscussion of these topics with the emphasis on OFDM systems (including DAB) can befound in [Schulze, 2005]. We further refer to the comprehensive textbooks about digitaltransmission [Benedetto, 1999], [Proakis, 2008], [Kammeyer, 2008].
2.2.1 Multicarrier Modulation
To cope with the problem of intersymbol interference caused by long echoes, DABuses the type of multicarrier modulation known as OFDM (Orthogonal FrequencyDivision Multiplex). The simple idea behind multicarrier modulation is to split upthe high-rate data stream into K parallel data streams of low data rate and tomodulate each of them separately on its own (sub-)carrier. This leads to an increaseof the symbol duration TS by a factor of K. For sufficiently high K, it is possible to
0 50 100 150 200 250 300 350 400 450 500
10
5
0
−5
−10
−15
−20
−25
Relative Frequency [kHz]
Lev
el [
dB
]
Figure 2.3 Frequency selectivity of multipath fading
32 Digital Audio Broadcasting
![Page 63: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/63.jpg)
keep TS significantly longer than the echo duration and to make the system lesssensitive to intersymbol interference.
OFDM is a spectrally very efficient kind of multicarrier modulation, because itminimises the frequency separation between the individual carriers by allowing somecontrolled spectral overlap between the carriers, without causing adjacent channel inter-ference (ACI). This goes back to the mathematical property of orthogonality that gavethe name to OFDM.
It is easy to understand an OFDM signal s(t) as a kind of signal synthesis by a finiteFourier series defined by
sðtÞ ¼PK =2
k¼�K =2
zk�e j2pkt =T : ð2:4Þ
It is defined on an interval (Fourier period) of length T. The complex Fourier coefficientszk carry the digitally coded information. For each time interval of lengthT, another set ofKþ 1 information carrying coefficients can be transmitted. In many practical systemsincluding DAB, the DC coefficient for k=0 will not be used (i.e. is set to zero) forreasons of hardware implementation. The Fourier synthesis can be interpreted as amodulation of each complex modulation symbol zk on a complex carrier wave exp(j2pkt/T) with frequency k/T (k= – 1, – 2, . . . , – K/2). The signal s(t) is the complexbaseband signal and has to be converted to an RF signal by means of a quadraturemodulator. At the receiver side, Fourier analysis of the downconverted complex base-band signal will produce the complex symbols using the well-known formula
zk ¼1
T
Z T
0
e�j2pkt =T sðtÞdt; ð2:5Þ
which results from the orthogonality of the carrier waves. Both Fourier analysis andsynthesis will be implemented digitally by the FFT (Fast Fourier Transform) and IFFT(Inverse FFT) algorithms. The transmission chain is shown in Figure 2.4.
The part of the OFDM signal that transmits the K complex coefficients zk is called theOFDM symbol.
To make the transmission more robust against long echoes, the OFDM symbol periodTS will be made longer than the Fourier period T by a so-called cyclic prefix or guardinterval of length D simply by cyclic continuation of the signal. A synchronisation errorsmaller than D will then only lead to a frequency-dependent but constant phase shift.Echoes are superpositions of ill-synchronised signals and will cause no intersymbolinterference, but a constant phasor, as long as the delays are smaller than D. For DAB,differential quadrature phase shift keying (DQPSK) is used so that this constant phasecancels out at the demodulator.
The length ofTS is limited by the requirement that the phase fluctuations must be small(Equation 2.3).
On the other hand, long echoes require a long guard interval and a longTS. To keep thesystem flexible for different physical situations, four Transmission Modes (TMs) withdifferent parameter sets have been defined, see Table 2.3.
System Concept 33
![Page 64: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/64.jpg)
The product of the number of sub-carriers K and the spacing 1/T between them is thesame for all transmission modes and determines the total signal bandwidth of approxi-mately 1.5 MHz. The parameters of all transmission modes can be easily scaled into eachother. The ratio D/T is always the same. The last column in Table 2.3 gives a rule ofthumb for the maximum transmission frequency due to the phase fluctuation caused bythe Doppler effect. A car speed of 120 km/h and a physical channel with no line of sight(the so-called isotropic Rayleigh channel with Jakes Doppler spectrum, see [Schulze,2005], [David, 1996]) has been assumed. These values correspond to fDmax TS=0.05,which is a rule-of-thumb upper limit where the DAB system begins to fail. This is basedon theoretical curves as well as on simulations. For a more detailed treatment of thattopic, we refer to [Schulze, 2005].
Transmission mode I with the very long guard interval of nearly 250 ms has beendesigned for large-area coverage, where long echoes are possible. It is suited for singlefrequency networks with long artificial echoes; 200 ms correspond to a distance of 60 km,which is a typical distance between transmitters. If all transmitters of the same coveragearea are exactly synchronised and send exactly the same OFDM signal, no signal ofrelevant level and delay longer than the guard interval will be received. Since the OFDMsymbol length TS is very long, transmission mode I is sensitive against rapid phasefluctuations and should only be used in the VHF region.
Transmission mode II can cope with echoes that are typical of most topographi-cal situations. However, in mountainous regions, problems may occur. This mode issuited for the transmission in the L-band at 1.5GHz.
Transmission mode III has been designed for satellite transmission. It may besuited also for terrestrial coverage, if no long echoes are expected.
The parameters of TM IV lie just between mode I and II. It was included later inthe specification to allow for more flexibility in broadcasting planning.
Table 2.3 The OFDM parameters for the four DAB transmission modes
Mode K 1/T Ts D max. frequency
TM I 1536 1 kHz �1246 ms �246ms �375MHzTM II 384 4 kHz �312 ms �62ms �1.5GHz
TM III 192 8 kHz �156 ms �31ms �3GHzTM IV 768 2 kHz �623 ms �123ms �750MHz
PhysicalChannel
IFFT
FFT A/D
I/Q-Mod.
I/Q-Dem.
D/A
Figure 2.4 FFT implementation of OFDM
34 Digital Audio Broadcasting
![Page 65: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/65.jpg)
2.2.2 The Frame Structure of DAB
For each transmission mode, a transmission frame is defined on the physical signal levelas a periodically repeating structure of OFDM symbols that fulfil certain tasks for thedata stream. It is an important feature of the DAB system (and in contrast to the DVBsystem) that the time periods on the physical level and on the logical (data) level arematched for audio transmission. The period TF of the transmission frame is either thesame as the MPEG-1 and MPEG-2 Audio Layer II frame length of 24 ms or an integermultiple of it. As a consequence, the audio data stream does not need its own synchro-nisation. This ensures a better synchronisation stability especially for mobile reception.
The structure for TM II is the simplest and will thus be described first. Thetransmission frame length is 24 ms. Its first two OFDM symbols build up theSynchronisation Channel (SC). The next three OFDM symbols carry the data ofthe Fast Information Channel (FIC) that contains information about the multiplexstructure and transmitted programmes. The next 72 OFDM symbols carry the data ofthe Main Service Channel (MSC). The MSC carries useful information, such as audiodata or other services. Figure 2.5 shows the transmission frame structure. It is alsovalid for TMs I and IV.
All these OFDM symbols in a transmission frame of TM II have the same durationTS� 312 ms, except for the first one. This so-called null symbol of length TNull � 324 ms isto be used for rough time synchronisation. The signal is set to zero (or nearly to zero)during this time to indicate physically the beginning of a transmission frame. The secondOFDM symbol of the SC is called the TFPR (Time–Frequency–Phase Reference)symbol. The complex Fourier coefficients zk have been chosen in a sophisticated wayso that this symbol serves as a frequency reference as well as for channel estimation forthe fine tuning of the time synchronisation. Furthermore, it is the start phase for thedifferential phase modulation. Each of the following OFDM symbols carries 384DQPSK symbols corresponding to 768 bits (including redundancy for error protection,see below). The three OFDM symbols of the FIC carry 2304 bits. Because they are highlyprotected with a rate 1/3 code, only 768 data bits remain. The FIC data of eachtransmission frame can be decoded immediately without reference to the data of othertransmission frames, because this most important information must not be delayed.The 72 OFDM symbols of the MSC carry 55 296 bits, including error protection. Thiscorresponds to a (gross) data rate of 2.304Mbps. The data capacity of 55 296 bits in each24 ms time period is organised in so-called Capacity Units (CUs) of 64 bits. In the MSCmany audio programmes and other useful data services are multiplexed together. Sinceeach of them has its own error protection, it is not possible to define a fixed net data rateof the DAB system.
MS
C 7
2
TF
PR
Nul
l
FIC
1
FIC
2
FIC
3
MS
C 1
MS
C 3
MS
C 2
96 ms (TM I) or 24 ms (TM II) or 48 ms (TM IV)
MS
C 7
1
Figure 2.5 Transmission frame structure
System Concept 35
![Page 66: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/66.jpg)
The transmission frames of TMs I and IV have exactly the same structure. Since theOFDM symbols are longer by a factor of 4 or 2, respectively, the transmission framelength is 96 ms or 48 ms. The number of bits in the FIC and MSC increases by the samefactor, but the data rate is always the same.
For TM III, the frame duration is TF¼ 24 ms. Eight OFDM symbols carry the FIC,and 144 OFDM symbols carry the MSC. The data rate of the FIC is higher by a factorof 4/3 compared to the other modes. The MSC always has the same data rate.
For all four transmission modes, theMSC transports 864 CUs in 24ms. There is a dataframe of 864 CUs¼ 55 296 bits common for all transmission modes that is called theCommon Interleaved Frame (CIF). For TMs II and III, there is exactly one CIF insidethe transmission frame. For TM I, there are four CIFs inside one transmission frame of96 ms. Each of them occupies 18 subsequent OFDM symbols of the MSC. The first islocated in the first 18 symbols, and so on. For TM IV, there are two CIFs inside onetransmission frame of 48 ms. Each of them occupies 36 subsequent OFDM symbols ofthe MSC.
2.2.3 Channel Coding
2.2.3.1 Convolutional Coding of the Logical Frames
The DAB system allows great flexibility in the choice of the proper error protectionfor different applications and for different physical transmission channels. Usingrate compatible punctured convolutional (RCPC) codes introduced by [Hagenauer,1988], it is possible to use codes of different redundancy without the necessity fordifferent decoders. One has a family of RCPC codes originated by a convolutionalcode of low rate that is called the mother code. The daughter codes will begenerated by omitting specific redundancy bits. This procedure is called puncturing.The receiver must know which bits have been punctured. Only one Viterbi decoderfor the mother code is necessary. The mother code used in the DAB system isdefined by the generators (133,171,145,133) in octal notation. The encoder is shownas a shift-register diagram in Figure 2.6.
ai
X0,i
X1,i
X2,i
X3,i
Figure 2.6 Encoder for the DAB mother code
36 Digital Audio Broadcasting
![Page 67: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/67.jpg)
The mother code has the code rate Rc¼ 1/4, that is for each data bit ai the encoderproduces four coded bits x0,i, x1,i, x2,i and x3,i. As an example, the encoder outputcorresponding to the first eight data bits may be given by four parallel bit streams writtenin the following matrix (first bit on the left hand side):
1 0 1 1 0 1 1 0
1 1 1 1 0 0 1 0
1 1 0 0 1 0 1 0
1 0 1 1 0 1 1 0
A code of rate 1/3 or 1/2, respectively, can be obtained by omitting the last one or tworows of the matrix. A code of rate 2/3 (=8/16) can be obtained by omitting the last twocolumns and every second bit in the second column. If we shade every omitted (punctu-red) bit, we get the matrix:
1 0 1 1 0 1 1 0
1 1 1 1 0 0 1 0
1 1 0 0 1 0 1 0
1 0 1 1 0 1 1 0
For 8 data bits now only 12 encoded bits will be transmitted: the code has rate 8/12. Usingthis method, one can generate code rates 8/9, 8/10, 8/11, . . . . 8/31, 8/32. The puncturingpattern can even be changed during the data stream, if the condition of rate compatibilityis taken into account [Hagenauer, 1988].
RCPC codes offer the possibility of Unequal Error Protection (UEP) of a data stream:some bits in the data stream may require a very low bit error rate (BER), others may beless sensitive against errors. Using RCPC codes, it is possible to save capacity and addjust as much redundancy as necessary.
UEP is especially useful for MPEG-1 and MPEG-2 Audio Layer II data. They areorganised in frames of 24 ms. The first bits are the header, the bit allocation (BAL) table,and the scale factor select information (SCFSI). An error in this group would make thewhole frame useless. Thus it is necessary to use a strong (low-rate) code here. The nextgroup consists (mainly) of scale factors. Errors will cause annoying sounds (‘birdies’), butthese can be concealed up to a certain amount on the audio level. The third group is theleast sensitive one. It consists of sub-band samples. A last group consists of Programme-associated Data (PAD) and the Cyclic Redundancy Check (CRC) for error detection inthe scale factor (of the following frame). This group requires approximately the same
1 0 1 1 0 1 1 0
1 1 1 1 0 0 1 0
1 1 0 0 1 0 1 0
1 0 1 1 0 1 1 0
System Concept 37
![Page 68: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/68.jpg)
protection as the second one. The distribution of the redundancy over the audio framedefines a protection profile. An example is shown in Figure 2.7.
The PAD may be extended to the so-called X-PAD. In this case, the PAD group sizeincreases and the audio sub-band sample group decreases. It is important to note that theerror protection does not take this into account. The X-PAD is thus worse protected (seesection 2.3.3.2).
For audio data with a sampling frequency of 48 kHz, the DAB system allows 14 dif-ferent data rates between 32 and 384 kbps. The protection profiles for all these date ratesare grouped into five Protection Levels PL1 to PL5. Inside each protection level differentdata rates are possible, but the robustness against errors is the same. This means, forexample, that if a broadcaster switches between 192 and 256 kbps, the audio quality willchange, but not the coverage area. PL1 is the most robust protection level, PL5 the leastrobust one. All protection levels except PL5 are designed for mobile reception; 14 datarates and five protection levels lead to 70 possible combinations. For 64 of them, aprotection profile is defined. Table 2.4 shows the possible combinations and the requirednumber of capacity units.
TheDAB system allows eight protection levels for Equal Error Protection (EEP). Theyare intended for data transmission and also used for DABþ and DMB. For the so-calledA-profiles 1-A, 2-A, 3-A, 4-A, all data rates are possible that are integer multiples of8 kbps. For the B-profiles the data rate must be amultiple of 32 kbps. Table 2.6 shows theeight protection levels and their code rates. The third column shows the number of CUsrequired for a 64 kbps data stream. The fourth column shows the required SNR to reacha BER of 2� 10�4 for TM II in a Rayleigh fading channel with fDmax¼ 40 Hz. The fifthcolumn shows the same for fDmax¼ 125 Hz.
The protection levels 4-A and 4-B are very sensitive to fast fading. They should not beused for mobile applications.
All the channel coding is based on a frame structure of 24 ms. These frames are calledlogical frames. They are synchronised with the transmission frames, and (for audio) with
24 ms
Gro
up
1:
Hea
der
, BA
L, S
CF
SI
Gro
up
4:
PA
D,
Sca
le f
acto
r C
RC
Gro
up
2:
Sca
le f
acto
rs
Group 3: Sub-band samples
Red
un
dan
cy
Rc = 8/14
Rc = 8/18
Rc = 8/24
Rc = 8/19
Figure 2.7 Example of an audio UEP profile
38 Digital Audio Broadcasting
![Page 69: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/69.jpg)
the audio frames. At the beginning of one logical frame the coding starts with the shiftregisters in the all-zero state. At the end, the shift register will be forced back to the all-zero state by appending six additional bits (so-called tail bits) to the useful data to helpthe Viterbi decoder. After encoding this 24 ms logical frame builds up a puncturedcodeword. It always contains an integer multiple of 64 bits, that is an integer numberof CUs. Whenever necessary, some additional puncturing is done to achieve this. A data
Table 2.4 Capacity needed for the possible combinations of audio data rates and protection levels
Data Rate PL1 PL2 PL3 PL3 PL5
32 kbit/s 35 CUs 29 CUs 24 CUs 21 CUs 16 CUs48 kbit/s 52 CUs 42 CUs 35 CUs 29 CUs 24 CUs
56 kbit/s X 52 CUs 42 CUs 35 CUs 29 CUs64 kbit/s 70 CUs 58 CUs 48 CUs 42 CUs 32 CUs80 kbit/s 84 CUs 70 CUs 58 CUs 52 CUs 40 CUs
96 kbit/s 104 CUs 84 CUs 70 CUs 58 CUs 48 CUs112 kbit/s X 104 CUs 84 CUs 70 CUs 58 CUs128 kbit/s 140 CUs 116 CUs 96 CUs 84 CUs 64 CUs
160 kbit/s 168 CUs 140 CUs 116 CUs 104 CUs 80 CUs192 kbit/s 208 CUs 168 CUs 140CUs 116 CUs 96 CUs224 kbit/s 232 CUs 208 CUs 168 CUs 140CUs 116 CUs256 kbit/s 280 CUs 232 Cus 192 CUs 168 CUs 128 CUs
320 kbit/s X 280 CUs X 208 CUs 160 CUs384 kbit/s 41 6 Cus X 280 CUs X 192 CUs
Note: It can be seen from the figures in Table 2.4 that the coding strategy supports many possible
changes of configuration. For example, if a 256kbit/s audio channel is split up into two 128 kbit/schannels at the same protection level, they will require the same capacity. Furthermore, in mostcases one can increase the protection to the next better level and lower the audio data rate by onestep without changing the required capacity. Such a diagonal of constant capacity of 140 CUs has
been marked by shading in Table 2.4. It is possible to multiplex several audio channels of differentsize together, as long as their total size does not exceed 864 CUs. Table 2.5 shows as an example thenumber of 192 kbit/s audio programmes that can be transmitted for the different protection levels
and the signal-to-noise ratio (SNR) that is needed at the receiver in a typical (not fast) fadingchannel [Schulze, 1995]. A small capacity for data services is always left.
Table 2.5 Number of 192 kbit/s audio programmes andrequired SNR
Protection Level Number of Programmes SNR
PL1 4 7.4 dBPL2 5 9.0 dBPL3 6 11.0 dB
PL4 7 12.7 dBPL5 8 16.5 dB
System Concept 39
![Page 70: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/70.jpg)
stream of subsequent logical frames that is coded independently of other data streams iscalled a sub-channel. For example, an audio data stream of 192 kbps is such a possiblesub-channel. A PAD data stream is always only a part of an audio sub-channel. After thechannel encoder, each sub-channel will be time interleaved independently as described inthe next subsection. After time interleaving, all sub-channels are multiplexed togetherinto the common interleaved frame (CIF).
Convolutional codes and their decoding by the Viterbi algorithm are treated intextbooks about coding, see for example [Clark, 1988], [Bossert, 1999], [Proakis,2008]. Hoeher [1991b] gives some insight into how the channel coding for DABaudio has been developed. His work reflects the state of the research work on thistopic a few months before the parameters were fixed. Bit error curves of the finalDAB coding scheme in a mobile fading channel and a discussion of the limits of thesystem can be found in Schulze [1995].
2.2.3.2 Concatenated Coding for Enhanced Packet Mode Coding, DAB+ and DMB
For the transmission of video or AAC audio bitstreams, the convolutional code used inDAB does not guarantee a sufficiently low residual bit error rate in the data. Thereforeadditional outer Reed-Solomon (RS) coding is necessary to remove these residual errors.The same holds for some packet mode applications.
Reed Solomon (RS) codes may be regarded as the most important block codes becauseof their extremely high relevance for many practical applications. These include deepspace communications, digital storage media, and the digital video broadcasting systemDVB. The theory of RS codes can be found in many textbooks, see, e.g. [Bossert, 1999]and references therein. In this section we restrict ourselves to the discussion of some basicproperties of RS codes as far as they are important for the practical application.
The most common RS codes are based on byte arithmetics rather than on bit arith-metics. Thus, RS codes correct byte errors instead of bit errors. As a consequence, RScodes are favourable for channels with bursts of bit errors as produced by the Viterbidecoder in the DAB system. They lead to a very low output residual error rate if the input
Table 2.6 EEP levels: code rate, 64 kbit/s channel size, and required SNR
Protection Level Rc= Size of 64 kbit/s SNR (40Hz) SNR (125Hz)
1-A 1/4 96CUs 5.0 dB 5.4 dB2-A 3/8 64CUs 7.1 dB 7.6 dB
1-B 4/9 54CUs 8.4 dB 8.8 dB3-A 1/2 48CUs 9.3 dB 10.0 dB2-B 4/7 42CUs 10.6 dB 11.5 dB
3-B 4/6 36CUs 12.3 dB 13.9 dB4-A 3/4 32CUs 15.6 dB 19.0 dB4-B 4/5 30CUs 16.2 dB 21.5 dB
40 Digital Audio Broadcasting
![Page 71: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/71.jpg)
error rate is moderate. Thus, an inner convolutional code concatenated with an outer RScode is a suitable setup if a very low residual error rate is needed in case of a mobile radiotransmission (see section 2.2.7.2).
RS codes based on byte arithmetics always have the code word lengthN¼ 28�1¼ 255. For an RS(N,K,t) code, K data bytes are encoded to a codeword of N bytes, and the code can correct up to t byte errors. Figure 2.8 showsthe structure of a systematic RS code word with an even number N�K¼ 2t ofredundancy bytes called parity check (PC) bytes. In that example, the parity checkbytes are placed at the end of the code word.
In practice, the fixed code word length N¼ 255 is an undesirable restriction. Onecan get more flexibility by using a simple trick. For an RS(N,K,t) code withN¼ 255, we want to encode only K1 < K data bytes and set the first K �K1
bytes of the data word to zero. We then encode the K bytes (including the zeros)with the RS(N,K,t) systematic encoder to obtain a code word of length N whosefirst K � K1 code words are equal to zero. These bytes contain no information andneed not be transmitted. By this method we have obtained a shortened RS(N1,K1,t)code word with N1¼N � (K � K1). Figure 2.9 shows the code word of a shortenedRS(204, 188, t¼ 8) code obtained from an RS(255, 239, t¼ 8) code. Before decoding,at the receiver, the K � K1 zero bytes must be appended at the beginning of thecode word and a RS(255, 239, t¼ 8) decoder will be used. This shortened RS codeused as the outer code for the DVB-T system is adopted to DAB for the enhancedstream and packet mode encoding (see section 2.3.3.3).
In DABþ (see section 3.4.2) a shortened RS(120, 110, t¼ 5) code is used that isobtained from the original RS(255, 245, t¼ 5) code and hence differs from the one usedin enhanced packet mode.
It may happen that the decoder detects errors which cannot be corrected. In that caseof decoding failure an error flag can be set to indicate that the data are in error. Theapplicationmay then take benefit from this information. If it is known that some receivedbytes are very unreliable (e.g. from an inner decoder that provides such reliabilityinformation), the decoder can make use of this fact and perform so-called ‘erasure-based decoding’, since these bytes are called erasures.
K data bytes 2t PC bytes
Figure 2.8 A systematic RS code word
51 zero bytes 188 data bytes 16 PC bytes
Figure 2.9 A shortened RS code word
System Concept 41
![Page 72: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/72.jpg)
2.2.4 Interleaving and PSK Mapping
For an efficient error correction with a convolutional code, a uniform distribution ofchannel bit errors (before the decoder) is necessary. A mobile radio channel producesburst errors, since many adjacent bits will be disturbed by one deep fade. For OFDM,this holds in time and in the frequency direction. To reach a more uniform distribution ofbadly received bits in the data stream before the decoder, the encoded bits will be spreadover a larger time-frequency area before being passed to the physical channel. Thisprocedure is called (time and frequency) interleaving. At the receiver, this spreadinghas to be inverted by the deinterleaver to restore the proper order of the bit stream beforethe decoder.
2.2.5 Time Interleaving and Overall Delay
To spread the coded bits over a wider time span, a time interleaving will be applied foreach sub-channel. It is based on a so-called convolutional interleaver. First, the codeword(i.e. the bits of one logical frame) will be split up intoM small groups of B¼ 16 bits. Thebits with number 0 to 15 of each group will be permuted according to the bit reverse law(i.e. 0!0, 1!8, 2!4, 3!12, . . . , 14!7, 15!15). Then, in each group, bit no. 0 will betransmitted without delay, bit no. 1 will be transmitted with a delay of 24ms, bit no. 2 willbe transmitted with a delay of 2� 24 ms, and so on, until bit no. 15 will be transmittedwith a delay of 15� 24 ms. At the receiver side, the deinterleaver works as follows. Ineach group bit no. 0 will be delayed by 15� 24ms, bit no. 1 will be delayed by 14 � 24ms,and so on, bit no. 14 will be delayed by 24 ms, and bit number 15 will not be delayed.Afterwards, the bit reverse permutation will be inverted. Obviously, the deinterleaverrestores the bit stream in the proper order, but the whole interleaving and deinterleavingprocedure results in an overall decoding delay of 15 � 24ms¼ 360ms. This is a price thathas to be paid for a better distribution of errors. A burst error on the physical channel willbe broken up by the deinterleaver, because a long burst of adjacent (unreliable) bitsbefore the deinterleaver will be broken up, so that two bits of a burst have a distance of atleast 16 after the deinterleaver and before the decoder.
The block diagram of a general convolutional interleaver (sometimes referred to as‘Forney-Interleaver’) with parameters (B,M) is shown in Figure 2.10. The serial stream ofsymbols is converted into B parallel streams. Each parallel stream experiences a delay ofi � M symbol clocks with i=0,1,. . .,B�1. The figure also shows the correspondingdeinterleaver.
The time interleaving will only be applied to the data of the MSC. The FIC has to bedecoded without delay and will therefore only be frequency interleaved.
It should be mentioned that other components of the DAB signal chain will causeadditional time delay of the signal. This is caused, for example, by the source encodingand decoding, convolutional coding and decoding, additional delays in the distributionnetwork to the transmitter sites needed for synchronisation in single frequency networks(see section 7.6.3) and path delays from the transmitter to the receiver. Typically, anMPEG-1/MPEG-2 Audio Layer II encoder needs a processing time of about 80 ms. Thesame delay is again required in the audio decoder. Generation of DRC data will also needa processing time of 24 ms to 48 ms, but it can be done in parallel to the source coding
42 Digital Audio Broadcasting
![Page 73: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/73.jpg)
process. If several audio codecs are cascaded in the distribution chain, the time delay willincrease according to the number of cascading steps.
Table 2.7 gives an overview on the orders of magnitude of the different contributionsto the overall system delay.
Summing all these delay portions, the overall time delay of a DAB audio programmewill result in more than 500 ms for terrestrial transmission, and more than 750 ms fornetworks using satellite distribution or transmission.
These values are significantly higher than for traditional analogue audio broadcasting,such as FM-radio. This has to be considered for any time-critical programme parts, suchas time announcements (gong), or interactive programme items such as phone-ins.
an
cn
cn
dn
S/P
S/P
P/S
P/S
NoDelay
NoDelay
(B – 1)M
(B – 1) . M
(B – 2) . M
M
M
2 . M
. . .
. . .
Figure 2.10 Block diagram of convolutional interleaver (top) and deinterleaver (bottom)
Table 2.7 Contributions to the DAB overall system delay
Mechanism Delay Remarks
Audio coding and decoding � 160ms depending on implementation
MSC Time Interleaving 360ms prescribed by DAB standardConvolutional coding and decoding � 1ms depending on implementationNetwork (terrestrial distribution) � 2ms
Network (satellite distribution) � 275ms Geosynchronous orbitTransmission (terrestrial) � 0.2msTransmission (satellite) � 135ms Geosynchronous and highly
inclinded elliptical orbit
System Concept 43
![Page 74: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/74.jpg)
2.2.6 DQPSK Modulation and Frequency Interleaving
Because the fading amplitudes of adjacent OFDM sub-carriers are highly corre-lated, the modulated complex symbols will be interleaved in frequency direction.This will be done with the QPSK symbols before differential modulation. Weexplain the mechanism by the example of TM II: a block of 768 encoded bits hasto be mapped onto the 384 complex coefficients for one OFDM symbol of durationTS. The first 384 bits will be mapped to the real parts of the 384 QPSK symbols,the last 384 bits will be mapped to the imaginary parts. To write it down formally,the bits of the lth block pi,l (i¼ 0, 1, . . . , 2K � 1) will be mapped to the QPSKsymbols qi,l (i¼ 0, 1, . . . , K � 1) according to the rule
qi ; l ¼1ffiffiffi2p ½ð1� 2pi ; lÞ þ jð1� 2piþK ; lÞ�; i ¼ 0; 1; . . . K � 1:
The frequency interleaver is simply a renumbering of the QPSK symbols according to afixed pseudo-random permutation F(i), as shown in Table 2.8. The QPSK symbols afterrenumbering are denoted by yk,l (k¼ –1, –2, –3, . . . , –K/2).
The frequency interleaved QPSK symbols will be differentially modulated accordingto the law
zk ; l ¼ zk ; l�1:yk ; l:
The complex numbers zk,l are the Fourier coefficients of the OFDM symbol no. l in theframe.
2.2.7 Performance Considerations
2.2.7.1 Degradation Due to Failure of Interleaving
Sufficient interleaving is indispensable for a coded system in a mobile radio channel.Error bursts during deep fades will cause the Viterbi decoder to fail. OFDM is very wellsuited for coded transmission over fading channels because it allows time and frequencyinterleaving. Both interleaving mechanisms work together. An efficient interleavingrequires some incoherency of the channel to get uncorrelated or weakly correlated errorsat the input of the Viterbi decoder. This is in contrast to the requirement of thedemodulation. A fast channel makes the time interleaving more efficient, but causesdegradations due to fast phase fluctuations. The benefit of time interleaving is very smallfor fDmax < 40 Hz. On the other hand, this is already the upper limit for the DQPSKdemodulation for TM I. For even lower Doppler frequencies corresponding to moderateor low car speeds and VHF transmission, the time interleaving alone does not help very
Table 2.8 Permutation for frequency interleaving (TM II)
i 0 1 2 3 4 5 . . . 380 381 382 383
k=F(i) �129 �14 �55 �76 163 141 . . . �116 155 94 �187
44 Digital Audio Broadcasting
![Page 75: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/75.jpg)
much. In this case, the performance can be saved by an efficient frequency interleaving.Long echoes ensure efficient frequency interleaving. As a consequence, SFNs support thefrequency interleaving mechanism. If, on the other hand, the channel is slowly andfrequency flat fading, severe degradations may occur even for a seemingly sufficientreception power level. A more detailed discussion of these items can be found inSchulze [1995].
2.2.7.2 Performance Aspects of Concatenated Coding
The original audio coding algorithms based on MPEG-1 and MPEG-2 were quiterobust and error-tolerant. The more efficient state-of-the-art source coding algo-rithms used for DABþ and DMB are more sensitive to transmission errors, espe-cially when for reasons of compatibility the advanced ‘Error Resilience Tools’ ofAAC are not used. Therefore the concept of a virtually error-free channel wasintroduced, as was first done in DVB-T.
The virtually error free channel can be achieved by concatenated coding using aconvolutional code (‘inner code’) together with a Reed-Solomon-Code (‘outer code’).To achieve best possible performance of this concatenation, proper byte interleaving isnecessary between the two stages of coding (Fig. 2.11). For DMB this is done by aconvolutional interleaver, see section 2.3.3.2, for DABþ and enhanced packet mode, avirtual interleaver is applied, see section 2.3.3.5.
If the outer interleaver is ideal, the burst errors at the output of the Viterbi decoder willlead to uniformly distributed byte errors at the input of the RS decoder. The RS code isable to correct a certain number of bytes in each block. It is therefore very efficient for bursterror decoding as long as the bursts are not too long, because it takes advantage from thefact that generally there is more than one bit error inside one erroneaus byte. This isillustrated by the following example: Let P be the byte error probability and Pb the biterror probability at the output of the Viterbi decoder after decoding the innerconvolutional code. The worst case of only one average bit error in one erroneous bytecorresponds toP¼ 8Pb. An upper bound for the residual bit error rate and block error rateafter RS decoding can be calculated from theoretical assumptions, see [Schulze, 2005,
OuterEncoder
Inter-leaver
InnerEncoder
OuterDecoder
Deinter-leaver
InnerDecoder
Channel
Figure 2.11 Block diagram of concatenated coding setup
System Concept 45
![Page 76: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/76.jpg)
p. 256]. For the RS (204, 188, t¼ 8) code, which can correct up to eight erroneous bytes ina block, this is displayed in Fig. 2.11. If ideal interleaving can be assumed for allinterleaving mechanisms, the curve of for PBlock can be combined with simulated biterror curves for the convolutional codes for DAB [BS. 1114], [Schulze, 1995]. Forexample, to achieve a BER of 2�10�4 at the output of the Viterbi decoder in a ruralchannel at a vehicle speed of 130 km/h at 226 MHz an average S/N of 14.7 dB is neededif code rate 0.5 is used. If we take into account some loss that is due to implementation, 16dB may be a reasonable figure. From Figure 2.12 we infer a block error rate of 10�10 afterRS decoding.
This estimation is confirmed by simulation results for the concatenated coding schemepresented in Figure 2.13. In this simulation the vehicle speed is 167 km/h, the otherparameters are the same as for the estimation. From the simulated curves an average S/Nof 17–18 dB is estimated to be required to achieve a BERof 10�10. It can also be seen fromthis figure that the additional outer interleaver is crucial for achieving a significantreduction of BER by concatenated coding.
To interpret these results, we assume as an example a low video rate of approximately500 kbps typical for DMB (see Chapter 9). Since each block has 188 useful bytescorresponding to 1504 useful bits, at this bit rate approximately 330 blocks are trans-mitted per second. For Pblock¼ 10�10 the average time between two error events is 30�106seconds or almost one year. It is therefore justified to speak of error-free reception oncethe required S/N is provided.
10–410–12
10–10
10–8
10–6
10–4
10–2
100
10–3 10–2 10–1
Pb
Res
idua
l err
or r
ate
Pres
PBlock
Figure 2.12 Block error rate and residual bit error rate for the RS code
46 Digital Audio Broadcasting
![Page 77: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/77.jpg)
2.3 The DAB Multiplex
2.3.1 Mode-Independent Description of the Multiplex
The DAB system is designed for broadcasting to mobiles in the frequency range from 30MHz to 3 GHz. This cannot be achieved by a single OFDM parameter set, so fourdifferent transmission modes are defined (see section 2.2.1). The DAB multiplex, how-ever, can be described independently of the transmission mode. To achieve this, contain-ers of information are defined which are used to transmit the data of applications (audioand data services, service information, etc.) to the receivers. Figure 2.14 shows thegeneration of the DAB multiplex.
The data of audio components and other applications are carried in what iscalled the Main Service Channel (MSC). Every 24 ms the data of all applicationsare gathered in sequences, called Common Interleaved Frames (CIFs). Multiplexand service-related information is mainly carried in the Fast Information Channel(FIC). Similar to the MSC, FIC data are combined into Fast Information Blocks(FIBs).
Depending on the transmission mode, a number of CIFs and FIBs are groupedtogether into one transmission frame which is mapped to a number of OFDM symbols(see section 2.2.2).
6 7 8 9 10 11 12 13 14 1510–6
10–5
10–4
10–3
10–2
10–1
100Improved FEC Performance, EEP-3A, RA ,fdTs = 0.04
Eb/N0, [dB]
Bit
Err
or R
ate
Convolutional codeConvolutional + RS,w/o Intlv.DAB-FECDVB-FEC
Figure 2.13 Performance of different coding schemes in a rural area Rayleigh channel for DABmode I at vehicle speed 167 km/h. Reproduced with permission of � Communications ResearchCentre, Canada (CRC)
System Concept 47
![Page 78: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/78.jpg)
2.3.2 The Main Service Channel
The MSC of the DAB system has a gross capacity of 2.304 Mbps. Depending on theconvolutional code rate, the net bit rate ranges from approximately 0.6 to 1.8 Mbps.Single applications do not normally consume this overall capacity. TheMSC is thereforedivided into sub-channels. Data carried in a sub-channel are convolutionally encodedand time interleaved. Figure 2.15 shows the conceptual multiplexing scheme of the DAB/DMB system.
The code rate can differ from one application to another. The data rates available forindividual sub-channels are given by integer multiples of 8 kbps (of 32 kbps for someprotection schemes). Figure 2.16 shows an example for a multiplex configuration. Eachsub-channel can be organised in stream mode or packet mode.
The division of the MSC into sub-channels and their individual coding profiles arereferred to as the Multiplex Configuration. The configuration is not fixed but may bedifferent for different DAB transmissions or may vary from time to time for the sametransmission. Therefore the multiplex configuration must be signalled to the receivers.This is done through the FIC.
2.3.3 Transport Mechanisms
The DAB system provides several mechanisms to transport data to receivers which areeach tailored to specific purposes. An overview is given in the figure of the inside backcover of the book.
The Stream Mode is designed for continuous and synchronous data streams such ascoded audio. In this case every 24 ms the same number of bits is transmitted transparently,that is, there is no mechanism inside the DAB system to provide synchronisation oraddressing except by the frame structure. All the necessary signalling has to be providedby the application itself. Streammode sub-channels may contain audio encoded accordingtoMPEG-1/MPEG-2 Audio Layer II, audio encoded according to the DABþ scheme (see
MSCMultiplexer
Audio andDataServices
Multiplex andServiceInformation
Main ServiceChannel (MSC )
Fast Information Channel (FIC )TransmissionFrameMultiplexer
independent of transmission mode
OFDMgenerator
Figure 2.14 Generation of the DAB multiplex
48 Digital Audio Broadcasting
![Page 79: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/79.jpg)
section 3.4.2), an MPEG-2 Transport Stream containing audio and video data encodedaccording to the DMB specification (see Chapter 9) or general data at fixed bit rate. In thecase of DABþ or DMB, additional outer Reed-Solomon codes described in section 2.2.3.2are used to increase the robustness against transmission errors (see section 2.2.7.2).
For asynchronous data there is PacketMode, which provides a protocol for conveyingsingle data groups through a packetised channel. The packet protocol allows repetitionof data to be handled and the creation of a multiplex of several parallel applications, to
MSCMultiplexer
CIFs
TimeInterleaver
TimeInterleaver
TimeInterleaver
TimeInterleaver
TimeInterleaver
Other sub-channels
ConvolutionalCoder
ConvolutionalCoder
ConvolutionalCoder
ConvolutionalCoder
ConvolutionalCoder
MPEG1/2Audio Coder
MPEG 4Audio Coder
MPEG 2Transport
Multiplexer
MPEG 4
PAD
PAD
(a)
(b)
(c)
(d)
(e)
Reed-Solomoncoder
(optional)
Reed-Solomoncoder &
virtual interleaver
Reed-Solomoncoder
PacketMultiplexer
OuterInterleaver
AudioVideo Coder
Figure 2.15 Generation of the common interleaved frames (CIFs) from a) an audio sub-channelusing MPEG-1/ MPEG-2 Audio Layer II, b) a general data stream mode sub-channel, c) a packetmode sub-channel or enhanced packet mode channel, d) an audio sub-channel using MPEG-4 HEAAC V2 audio coding (DABþ), e) an enhanced stream mode sub-channel using MPEG-4 Audio
(BSAC or AAC) and AVC video coding and formation of an MPEG-2 Transport Stream (DMB)
256 kbps Audio
224 kbps Audio
224 kbps Audio
192 kbps Audio
64 kbps Audio
64 kbps Data
36 kbps Data
Figure 2.16 An example of how the overall capacity is assigned to individual applications(capacity pie)
System Concept 49
![Page 80: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/80.jpg)
which the capacity can be flexibly assigned. It is possible to use the additional outer codealso in packet mode (see section 2.3.3.2).
A special way of transport is provided for Programme-associatedData (PAD) which isinserted into theMPEG-1/MPEG-2 Audio Layer II stream by defining a structure of theAuxiliary Data field of theMPEG audio frame specific to DAB. PAD can also be used inDABþ subchannels. It provides a number of functions related to the contents of theaudio programme and can be inserted at the place where the audio is produced. ThereforePAD is considered to be a part of the audio and not really a separate transport mechan-ism for data.
2.3.3.1 Stream Mode
Streammode is used for applications which can provide a constant data rate of amultipleof 8 kbps (32 kbps for the B coding profiles, see section 2.2.3). For example, at a samplingrate of 48 kHz, the MPEG-1/MPEG-2 Audio Layer II encoder generates a data frameevery 24 ms which exactly meets this requirement. When DABþ audio is used, the audiodata corresponding to 120 ms is organised in an audio super frame which is spread acrossfive 24 ms – frames [TS 102563]. When transmitting general data, the data stream can bedivided into ‘‘logical frames’’ containing the data corresponding to a time interval of 24ms. These logical frames can be transmitted one after the other in the same manner asMPEG audio frames.
When stream mode is used there are two options for error protection. Unequal errorprotection (UEP) is used with MPEG-1/MPEG-2 Audio Layer II and provides errorcorrection capabilities which are tailored to the sensitivity of the audio frame to bit errors(see section 2.2.3). For DABþ, DMB and for general data, equal error protection (EEP)is used, where all bits are protected in the same way.
2.3.3.2 Stream Mode Sub-Channels Using Concatenated Coding (DAB+ and DMB)
This Transport Mode is an evolution of the Stream Mode to allow for the use ofconcatenated coding. Although the principle is similar, the details of the concatenatedcoding are different for DMB and DABþ.
In the case of DABþ [TS 102563], the audio super frames are split into portions whicheach contain 110 bytes. These portions are coded using aRS (120, 110, t¼ 5) code. Due tothe arrangement of the data bytes and the order of transmission, virtual interleaving isachieved during the RS coding process similar to the enhanced packet mode (see section2.3.3.5).
In the case of DMB, MPEG-2 Transport Stream packets are carried in the DABsubchannel. These 188-byte long blocks are coded with the shortened RS (204, 188, t¼ 8)code. It should be noted that this RS code and the one of DABþ use the sameGalois fieldto allow for easy hardware implementation. Furthermore a convolutional interleaverwithM¼ 17 and B¼ 12 (17 � 12¼ 204, see Figure 2.10) is applied to those RS encoded204-byte long packets. This means that the bytes of each code word are transmitted in 12consecutive blocks each of length 204 bytes. This structure is similar to the one used in theDVB system. This mode is used for DMB with the MPEG-2 Transport Stream
50 Digital Audio Broadcasting
![Page 81: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/81.jpg)
[TS 102427] and for DAB-IPDC [TS 102978]. With a limited additional overhead of 7.8% the required quasi error-free reception of TV content even in a highly mobile environ-ment is achieved (see section 2.7.2.2).
2.3.3.3 Programme-Associated Data (PAD)
Although DAB provides mechanisms to carry general data in stream or packet mode,there is a need for an additional method for transmitting data which is closely linked to anMPEG-1 / MPEG-2 Audio Layer II or DABþ service. This is referred to as PAD.
At the end of the MPEG-1/ MPEG-2 Audio Layer II frame there is an auxiliary datafield which is not further specified in MPEG. For the DAB audio frame, however, thisfield is used to carry the CRC for the scale factors (see section 3.3.3), and two PAD fields,see Figure 2.17. In case of DABþ, the PAD is carried in a syntax element of the AACframe called ‘Data Stream Element’. The DAB system is transparent for the PAD. Thismeans that the PAD can be produced and inserted at the time when the audio signal iscoded, normally at the studio (see Chapters 5 and 6) and will be retrieved only whendecoding the audio signal in the receiver.
The fixed PAD (F-PAD) field consists of two bytes at the end of the DAB audio frame,which are referred to as Byte L (last) and Byte L–1. It enjoys the same protection level asthe SCF-CRC field and hence is well protected. Byte L–1 is used for signalling thecontents of Byte L and the presence of extended PAD, and for transmitting serialcommands, music/speech indication, and data related to the audio source(International Standard Recording Code or Universal Product Code/Euro-peanArticle Number). The only applications standardised for Byte L up to now is to signalDynamic Range Control data (DRC, see section 3.4.1) and in-house-information.
The extended PAD (X-PAD) field can be used to send larger amounts of data (up to64 kbps), for example text messages or multimedia objects (see Chapter 4). To create a
Scale factorCRC
Sub-bandSamples
F-PADX-PAD
ContentsIndicatorsData Fields
End of DAB audio frame (MPEG-1 / MPEG-2)
Error protection
...
Figure 2.17 The PAD fields at the end of the DAB audio frame
System Concept 51
![Page 82: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/82.jpg)
flexible multiplex structure within the PAD, a special packet structure was developed.The data are arranged in X-PAD-Data groups which each consist of a data field and aContents Indicator which signals the kind of data carried in the corresponding data fieldand in some cases the number of bytes of the data field. Data fields of X-PAD-DataGroups may be larger than the X-PAD data field and hence be sent in the X-PAD-fieldsof several audio frames. It is therefore possible to send large amounts of data althoughthe length of the X-PAD-field is restricted in each audio frame to provide sufficient datarate for the coded audio.
The extended PAD (X-PAD) field partly (4 bytes) enjoys the protection level of theSCF-CRC; the larger part, however, only enjoys the protection level of the sub-bandsamples. In ‘short X-PAD’ mode only the four better protected bytes are used forX-PAD; in this case there are restrictions on the applications that are carried. The one-byte contents indicator signals the type of data which is contained in the other three bytesof short X-PAD.
If more than four bytes are being used, this is referred to as ‘variable size X-PAD’. Inthis case, data of more than one data group and of several applications can be containedin the X-PAD-field. To signal this, a list of contents indicators is included in the X-PAD-field which signals the type of the data and the number of bytes for each application.From this information, the number of bytes used in total for X-PAD can be calculated.The contents indicators are separated from the data fields and are sent collectively in thebetter protected part to ensure that the important information on the contents andamount of data can be received with high probability.
For further details the reader is referred to section 7.4 of [EN 300401] and to section 5.4of [TS 102563].
2.3.3.4 Packet Mode
For packet mode transmission, the data is organised in MSC data groups whichconsist of a header, a data field of up to 8191 bytes and optionally a cyclicredundancy check (CRC) for error detection. The data group header allows identi-fication of different data group types such that, for instance, scrambled data andthe parameters to access them can be carried in the same packet stream. There arealso counters which signal if and how often the data group will be repeated. Anextension field offers the possibility to address end user terminals or user groups.Data groups are transmitted in one or several packets.
The packets themselves constitute the logical frames in packet mode similar to theaudio frames in stream mode. To fit into the DAB structure requiring a multiple of8 kbps, that is a multiple of 24 bytes per 24 ms, packet lengths of 24, 48, 72 and 96 bytesare defined in the DAB standard. The packets consist of a 5 byte header, a data field,padding if necessary, and a CRC for error detection. The packets may be arranged in anyorder in the transmission. The header of each packet signals its length so that the decodercan find the next packet. An important feature of packet mode is that padding packetscan be inserted if no useful data are available to fill the data capacity. Packet mode istherefore suitable for carrying asynchronous data. Up to 1023 applications may bemultiplexed in a packet mode transmission.
52 Digital Audio Broadcasting
![Page 83: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/83.jpg)
Figure 2.18 shows an example of a packet mode transmission. Two applications arecarried in parallel. From each application, a suitable amount of data, for example onefile, is selected to form a data group. The corresponding header is added to the data andthe CRC is calculated. Each data group is mapped onto a number of packets, each ofwhich may have a different length. The first, intermediate and last packets carrying dataof one data group are marked accordingly in their headers. The packets of differentapplications use different packet addresses. Therefore, the sequence of the packetsbelonging to the first application may be interrupted by those of the second application.However, within each sequence of packets, the transmission order has to be maintainedto allow the decoder to correctly reassemble the data group.
For more details of the packet mode, the data groups and packet headers the reader isreferred to [TR 101496].
2.3.3.5 Enhanced Packet Mode (EPM)
For packet mode applications it is possible in addition to use the outer Reed-Solomonforward error correcting code (RS) to increase the performance of the transmissionsystem. This is referred to as enhanced packet mode. The additional RS parity databytes are transmitted in a way that also allows receivers not using this feature to decodethe data packets. To achieve this, all packets of a packet mode channel are fed to the RSencoder irrespective of their packet address. The RS coding is applied to sequences of
Data GroupHeader
Data GroupData field
CRC Data GroupHeader
Data GroupData field
CRC
First Applicatione.g. HTML files
Second Applicatione.g. Software Update
up to 8191 bytesper Data Group
up to 8191 bytesper Data Group
CRC(C)
H H D CD C
PacketHeader (H)
PacketData field (D)
H H H H H D CD CD CD CD C
Figure 2.18 Example of a packet mode transmission multiplexing two applications
System Concept 53
![Page 84: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/84.jpg)
packets comprising 2256¼ 12 * 188 bytes of application data, padding packets must beinserted if necessary (Fig. 2.19).
The Application Data Table is filled vertically column by column with the data of thepackets. Then the Reed-Solomon parity bytes are calculated horizontally over the 188bytes in the same row. The RS coding process generates 192¼ 12 * 16 additional bytes ofRS parity data, i.e., 12 shortened RS codewords are generated at a time (seesection 2.2.4).
All application data columns are read out vertically as they are filled and are trans-mitted followed by the RS parity bytes which are also read out vertically (virtual timeinterleaving). These data are transported within nine consecutive ‘FEC packets’ imme-diately after the packets containing the application data (Fig. 2.20).
The enhanced packet mode was designed in a backwards-compatible way to thestandard packet mode, i.e. legacy receivers will discard the FEC packets, but canstill decode the application data packets if they are received error-free. For thispurpose the FEC packets are different from ordinary data packets in two ways:they use a packet address that is not used for a Service Component, and theirstructure, including the position of the CRC, is different from that of the data
1
Application Data Table(2 256 bytes)
row RS Data Table(192 bytes)
column
1 188 1 16
12
Figure 2.19 Generation of RS parity data in Enhanced Packet Mode
applicationdata
packets
generateFEC framecontaining
datapacketsand RS
data
encapsulateRS datainto FECpackets
FECpackets
datapackets
sub-channeldata
Figure 2.20 Insertion of FEC packets into a packet mode sub-channel
54 Digital Audio Broadcasting
![Page 85: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/85.jpg)
packets. This assures that the conventional CRC check will lead to discarding thesepackets in legacy devices.
For more details of the RS coding scheme the reader is referred to [EN 300401].
2.3.4 Fast Information Channel (FIC)
The FIC is used to signal the multiplex configuration of the DAB transmission andservice information for the services contained. Therefore, it uses fixed symbols in thetransmission frame which are known to the receivers. The receiver needs this informationto be able to decode any of the sub-channels. Therefore, for instant data acquisition, theFIC data are not time interleaved (hence the name ‘fast’). Instead, a high protection (coderate 1/3) and frequent repetition of the data is used to guarantee high availability.
The FIC consists of a number of Fast Information Blocks (FIBs) which carry theinformation (see Figure 2.21). Each FIB is made up from 32 bytes: two CRC bytes areused for error detection, the remaining 30 bytes are filled with Fast Information Groups(FIGs). The FIGs are distinguished by a type field. FIGs of type 0 are used for the MCIand Service Information (SI), FIGs of type 1 are used to send text labels, FIGs of type 5are used to send general data in the FIC (Fast Information Data Channel, FIDC), FIGsof type 6 are used with access control systems and FIGs of type 7 are used for in-housedata transmission by the broadcaster. Some FIG types use extensions to indicate differ-ent meanings of the data fields, e.g. FIG type 0 extension 1 (also referred to as FIG 0/1,etc.) is used to signal the sub-channel organisation while FIG type 0 extension 10 is usedto send the date and time.
In special cases the data rate provided by the FIB symbols in the transmission frame(32 kbps) may not be sufficient to carry all of the FIC information with the desiredrepetition rate. In this case, part of this information can be sent in parallel in packet modesub-channel #63 with packet address 1023. This is referred to as the AuxiliaryInformation Channel (AIC). The corresponding packet mode data group contains the
Fast Information Block (FIB ), 32 bytes
FIG 2FIG 1 FIG n CRCPadding(if neccessary)
HeaderType Length
DataExtension
Figure 2.21 Structure of a Fast Information Block (FIB) and a Fast Information Group (FIG)
System Concept 55
![Page 86: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/86.jpg)
FIGs as defined for the FIC. Data concerning other DAB transmissions may be sent onlyin the AIC. For more details see section 2.5.2.4.
2.3.5 Transmission Frames
From FIBs and CIFs transmission frames are formed which are then mapped to OFDMsymbols. Table 2.9 lists the duration of the frames and the number of FIBs and CIFs usedin each transmission mode.
2.3.6 The Logical Structure of the DAB Multiplex
The different data streams carried in the DABmultiplex can be grouped together to formwhat is called a ‘service’. The services can be labelled (e.g. ‘Bayern 3’) and it is the servicesfromwhich the listener makes his or her choice. All services taken together are referred toas an ensemble.
The different data streams (e.g. audio, data, etc.) which belong to one service are calledits Service Components. Different services may share components, and the logicalstructure of services, service components and the position in the CIF where the data ofthe components are actually carried is signalled as part of the MCI in the FIC.Figure 2.22 shows an example of this structure. The ensemble labelled DAB 1 containsa number of services, among themRadio 11, Radio 12, Data 29 and Radio 3. Radio 3 is aservice which consists of an audio component only, that is a ‘normal’ radio programme.Radio 11 and Radio 12 each consist of an audio component and share Radio 1 data as acommon data component which carries information relevant to both programmes orprogramme-independent data such as traffic messages. At times, say during a newsprogramme on the hour, Radio 11 and Radio 12 broadcast the same audio signal.Instead of transmitting the corresponding bits twice, it is possible to signal this at thelevel of service components. The capacity in the CIF usually used for the audio compo-nent of Radio 12 (i.e. sub-channel 7) can be reused during this time for another service orcomponent, for example slow motion video. Data 29 is a data service without an audiocomponent but with two separate data components. Figure 2.18 also shows how thedifferent components are transported in the MSC. It can be seen that different
Table 2.9 The frames of the four DAB transmission modes
Mode Duration ofTransmissionFrame, ms
Number of CIFs perTransmission Frame
Number of FIBsper TransmissionFrame
TMI 96 4 12
TMII 24 1 4TMIII 24 1 3TMIV 48 2 6
56 Digital Audio Broadcasting
![Page 87: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/87.jpg)
components (Radio 1 data and Data 29 data 2) may share a packet mode sub-channelwhile stream mode components each require an individual sub-channel.
It is also apparent in the figure which information has to be sent in the FIC: the sizesand positions of the sub-channels in the CIF and their respective code rates are signalledas ‘Sub-channel organisation’ in FIG type 0 extension 1, the services and their compo-nents are described by ‘Basic service and service component definition’ in FIG type 0extension 2 and 3 (used for packet mode).
Of course there is a need to provide further information about each service, such asservice label, programme type, programme number for recorder control, indication ofannouncements (e.g. for automatically switching to a service broadcasting traffic infor-mation), alternative frequencies and frequencies of other DAB transmissions. This kindof information may be displayed in order to assist the listener in operating the receiver orto enable the receiver to optimise the reception. The DAB system provides a number ofmechanisms for this purpose, far beyond what has been realised by the Radio DataSystem (RDS) in FM broadcasting (see section 2.5).
2.3.7 Multiplex Reconfiguration
To achieve a high flexibility, the multiplex may be reconfigured from time to time duringtransmission.When themultiplex configuration is about to change, the new information,together with the timing of the change, is transported via the MCI in addition to thecurrent one and indicates in advance what changes of the multiplex are going to take
DAB 1
Data 29 Radio 3Radio 11 Radio 12
ENSEMBLE
SERVICES
Radio 1data
Data 29data 1
Radio 11audio
Data 29data 2
Radio 3audio
Radio 12audio
SERVICECOMPONENTS
COMMONINTERLEAVEDFRAME
Sub-ch.1
Sub-ch.2
Sub-ch.7
Sub-ch.11
Sub-ch.58
...
Figure 2.22 Example of the logical structure of the DAB multiplex
System Concept 57
![Page 88: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/88.jpg)
place. Because of the time interleaving, special precaution has to be taken when the size ofa sub-channel changes. For details the reader is referred to Annex D of [EN 300401]. Dueto the formation of super frames, some further rules of operation apply for DABþ, seesection 8 of [TS 102563].
2.4 Conditional Access
New business models of modern broadcast systems demand protected distribution andcontrolled consumption of digital content. An example is subscription for pay-TV.
Whereas traditional broadcast systems distribute content to every member in thenetwork, the integration of an access control system enables transmission to closed-user-groups.
In this context, a closed-user-group is a set of members that are authorized to consumean identical service. Services may be used for device internal processing, like update ofnavigation data for PNAs (Personal Navigation Assistant), or for direct human con-sumption, e.g. weather reports.
Access control systems protect content during distribution using modern crypto-graphic methods for encryption and authentication. The content can be consumed onlyby the respective group members that have the necessary entitlements, usage rights andcryptographic keys.
From a service provider’s point of view, access control permits flexible business modelsin terms of:
• grouping content parts to services;• offering pay-services, e.g. pay-TV;• providing preview services;• maintaining customer relations, e.g. by exclusively providing high value content;• distribution of confidential data within a business-to-business relation;• subscription per theme, i.e. either lifetime or time-limited; and• protection of content owners rights.
Access control is an essential feature of digital broadcast systems and qualifies them forthe future.
2.4.1 General Principles
Since no dedicated access control system is foreseen in [EN 300401] and [TS 102367],general aspects and concepts regarding CA Systems and DRM Systems are described inthis section. They familiarize the reader with current methods of operation and point outspecial requirements for an application in DAB/DMB.
2.4.1.1 CA Systems and DRM Systems
Access control systems are known either as CA – Conditional Access systems or asDRM – Digital Rights Management systems.
58 Digital Audio Broadcasting
![Page 89: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/89.jpg)
CA systems have their origin in the TV-world and are applied, if the transmissionshould be protected and the consumption is subject to charge, e.g. pay-TV. In general,CA systems verify whether a potential user has the right to consume content or not. Theydo not distinguish between more detailed rights, as DRM systems do. Therefore thecontent is protected on its way through the broadcast channel (‘transport-channel-protection’) and is intended for singular consumption in case the potential user ownsthe relevant entitlements. Typically, CA terminal modules do not store the content forfurther use or distribution.
DRM systemsmeet the objectives of content owners, authors and publishers to protecttheir copyrighted music and videos from unauthorised use and sharing. They have beendeveloped for controlled content download, e.g. via Internet and its repeated consump-tion and forwarding. Therefore content is not only protected on its way to the terminaldevices but it remains protected for its future use.
Some DRM systems provide a large scale of different usage rights to their protectedobjects, including:
• Who is entitled to use the content?• How many times can the content be consumed?• How can the content be consumed, e.g. listened, printed out or viewed?• What kind of device is the content entitled for?• When will the rights expire?• Is content forwarding allowed?• Do geographical limitations exist?
Due to the fact that the distribution systems are widely combined and extended, today’smeaning and the application of the two concepts, CA and DRM, have become more andmore blurred. Hence DRM has become the catch-all term.
2.4.1.2 Access Control for Handheld Devices
Access control systems that are applied in a mobile environment need to cope with thefollowing limitations:
• The bandwidth is always constrained and expensive.• The devices are very limited in terms of processor, memory and battery power.• Portable devices are not always turned-on.• The devices lose signal and roam out of the coverage area from time to time.• A permanent active backchannel is not always available.• All kinds of one-to-one communication are expensive.• Permanent change of own geographical position and therefore passing through differ-
ent transmission zones (roaming) must be taken into account.
Hence existing and established CA and DRM systems have to be extended to meet theabove mentioned requirements.
System Concept 59
![Page 90: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/90.jpg)
2.4.1.3 Broadcast Systems and Hybrid Solutions
A typical broadcast system does not provide a backchannel for rights acquisition andmessage acknowledgement. Considering the above mentioned restrictions, all kinds ofmanagement information has to be repeated permanently to ensure a high receptionprobability. To keep the management overhead reasonable, this requires efficientlycoded and short messages. Efficient subscriber grouping and subscriber addressingalgorithms are essential.
In addition to broadcast-only distribution systems, hybrid solutions can be realised.That is, content distribution together with essential additional information via thebroadcast channel, but utilisation of alternative point-to-point systems, e.g. GSM forthe directed transmission of usage rights and entitlements. Those concepts require apermanent back channel.
2.4.1.4 Proprietary Solutions and Open Concepts
The predominant intention of access control manufacturers is the provision of proprie-tary, ‘closed’ solutions, supplying all relevant components on server and client side fromone source. They keep their system details secret. Examples for such solutions are ‘IrdetoPIsys’ and ‘Windows Media DRM’.
In contrast, part of the industry continues to work for open solutions and standards,enabling interoperability, quality and technology spreading, e.g. OMA DRM 2.0.
Open solutions are based on Kerckhoffs principle that the security of a cryptosystemshould rely on the secret of the used keys, even if the complete system design is publicknowledge (‘security through transparency’).
2.4.1.5 Underlying Key Hierarchy
All access control systems are based on a multilevel key hierarchy. This is for the securetransmission of keys from the transmitter to the receiver side and for separation ofdifferent services and corresponding service providers.
In general a key hierarchy comprises three to four levels, as shown in Figure 2.23:
• Layer 4:The multimedia content is encrypted with a symmetric encryption algorithm using acontent key (CW - control word).
• Layer 3:To descramble the content, the corresponding content key must exist in the terminaldevice. Hence the content keymust be distributed within a correspondingmanagementmessage (ECM – entitlement control message) in advance. This is done in a scrambledway, where the content key is scrambled with a service key (SK).
• Layer 2:Theregisteredandentitledterminaldeviceshavetheservicekeystoredandarethereforeabletodecrypt thecurrentcontentkey.Theservicekeyhasbeentransmitted inadvance (EMM–entitlementmanagementmessage). On its way it is protected with a device key (DK).
• Layer 1:The device key is being distributed during device registration.
60 Digital Audio Broadcasting
![Page 91: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/91.jpg)
The device key could either be a symmetric key or a public-private key pair. All other keysand algorithms in use are symmetric ones. The naming of the keys and managementmessages described above might differ within the CA and DRM systems.
2.4.1.6 Key Change and Message Repetition
Access control systems are exposed to hacker attacks. Hence relevant keys are frequentlychanged.
Taking the particular characteristics of mobile handsets into account we cannot counton permanent terminal accessibility and active backchannel. Therefore the transmittedmessages, containing keys and entitlements have to be repeated permanently.
Typical values for key change and message repetition are:
• content key change every 5–20 seconds;• repeated transmission of management messages containing the current content key
every 3–20 seconds (On start-up a terminal has to wait for the relevant managementmessage before it can start content decryption.);
• service key change once a month;• repeated transmission of management messages containing the current service key and
entitlements every 10–20 minutes.
Layer 4
Layer 3
Layer 2
Layer 1
encrypted contentover broadcast
ECM withscrambled Control Word
over broadcast
EMM withscrambled Service Key
over broadcast
Device Key overinteractive channel
Content
Control Word
ServiceKey
Device Key
CA DecoderCA Encoding System
E<SK>DK D<SK>DK
E<Cont>CW
E<CW>SK D<CW>SK
D<Cont>CW
E<X>Y encryption of plain X with key Y D<X>Y decryption of scrambled X with key Y
Figure 2.23 Multilevel key hierarchy of HECA – High Efficient Conditional Access system
[www.HECA]
System Concept 61
![Page 92: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/92.jpg)
2.4.1.7 Applied Cryptographic Algorithms and Security Module
Access control systems are based on certified cryptographic algorithms, see [www.NIST].They are applied for:
• content scrambling;• key protection;• authentication of messages;• secure storage mechanisms of keys and rights in the terminal device.
Depending on the field of application, the requirements on cryptographic algorithms interms of security, complexity and delay differ. Traditional radio content is supposed toalways be up-to-date but has a low life-span. Therefore content scrambling has to be fastbut only moderately secure. This could lead to an application of a symmetric algorithmwith 128 bit key length. In contrast, for the protection of content keys and service keyslonger keys will be used.
In general today the use of Advanced Encryption Standard (AES) encryption algo-rithms is favoured. Different AES modes, e.g. cipher feedback (CFB), cipher-basedmessage authentication code (CMAC) and different key length, e.g. 128, 256 are appliedfor the above mentioned fields of application. AES implementations are widely availablein software and hardware even for thin clients. They are secure, fast and easy to integrate.The Rivest-Shamir-Adleman (RSA) algorithm is in use for the asymmetric protection ofdevice keys.
Dependent on the requirements in terms of security, dedicated hardware is applied ontransmitter- as well as on receiver-side. Receiver might have integrated, soldered securitychips or they use external, removable solutions in SIM card format or SD card format.
The tasks of a security module are:
• decoding and evaluation of management messages;• decryption of service key and content key;• secure storage of device key, service key and entitlements;• delivery of content to descrambler;
In contrast to decryption of service keys and content keys that is performed in thesecurity module itself, the content is descrambled in the receiver core for reasons ofdata throughput.
2.4.2 System Architecture of HECA (Fraunhofer-IIS)
With the High Efficient Conditional Access system HECA [www.HECA], a CA Systemhas been designed that is especially tailored for digital broadcast systems with limitedbandwidth, like DAB.
It meets the above mentioned requirements in terms of security, mobility and effi-ciency. It can be applied on different DAB transport layers, see section 2.4.3, as well as onother digital broadcast media and transmission protocols, e.g. DRM – Digital RadioMondiale or TPEG – Transport Protocol Experts Group.
62 Digital Audio Broadcasting
![Page 93: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/93.jpg)
Figure 2.24 shows a brief overview of its components and workflow.The HECA Initialisation Server generates and delivers on demand from the device
producer unique Device-IDs and device keys of high quality. The device producerimplements them during the device manufacturing process.
At the request of a service provider, the HECA Entitlement Server configures servicesand stores the entitlements and subscriptions together with corresponding service keys inan internal or external database. It controls the service setup, service prolongation as wellas token reload and it generates corresponding EMMs, which are interpreted and storedin the terminal device, respectively the security module.
The HECA Encryption Server scrambles service data with the correspondingcontrol word, periodically generates ECMs and feeds both into the transmissionchain.
The ECM is decoded in the receiver’s security module. In the case of stored validentitlement, the decrypted control word is provided for content descrambling.
2.4.3 Conditional Access Framework for DAB
Earlier versions of the DAB Standard [EN 300401] specified the scrambling anddescrambling process and the coding of the related management messages. However,since the described concept was incomplete and not considered relevant, a moregeneric approach was chosen. Now a separate ETSI technical specification ‘Digital
Terminal Module
Security Module
EMM
Initialisation Server
Entitlement Server
Encryption Server
Scrambler
ECM Generator
Service Key
EMM Generator
CWGenerator
Service KeyGenerator
Device KeyGenerator
CW
ECM
MultimediaContent
SubscriberData
Descrambler
ECM Decoder
EMM Decoder
CW
Entitlement
Device Key
ServiceKeys
EncryptedMultimedia
Content
Figure 2.24 System Architecture of HECA – High Efficient Conditional Access system
System Concept 63
![Page 94: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/94.jpg)
Audio Broadcasting (DAB); Conditional Access’ [TS 102367] defines three possiblelevels where access control could be applied. It describes in detail how to signalscrambled content and where the related management messages have to be trans-ported. It specifies neither a scrambling mechanism nor the coding of managementmessages.
Hence the technical specification is a framework that is open for the integration ofseveral different CA or DRM systems and sets up corresponding tunnelling mechanisms.
Conditional access might be applied
• on DAB sub-channel level;• on DAB data-groups level; or• on MOT object level.
The underlying concept defining where related management messages have to betransported remains the same: They are not transported in separate additional chan-nels that would need to be synchronised but on the same level, e.g. managementmessages for the encryption of a DAB sub-channel are found in the same sub-channel,management messages for DAB data-groups are transmitted within a data-groupitself, and so on. This concept is essential for the accurately timed announcementsof content key changes.
The three modes are pictured in the following sub clauses. In addition the technicalspecification allows the introduction of further proprietary modes.
2.4.3.1 DAB Sub-Channel Encryption
If access control addresses a complete DAB sub-channel, either an audio sub-channelpossibly including PAD, an entire packet mode sub-channel or a stream mode sub-channel is protected. It is the most universal scrambling mode and represents the classical‘transport-channel-protection’, shown in Figure 2.25.
Audio Encoder
Packet Multiplexer CA System DAB MultiplexerData Services
PAD
Audio Program
Stream Mode Data
Figure 2.25 Location of access control system on DAB sub-channel level
64 Digital Audio Broadcasting
![Page 95: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/95.jpg)
2.4.3.2 DAB Data-Group Encryption
If protection of any data transfer protocol that usesMSCdata-groups, e.g.MOTor TDC(see sections 4.3, 4.8.1), is desired, an access control system is placed directly after data-group-assembling as shown in Figure 2.26.
Data-group encryption protectsMSC data-groups that are transported in PAD or in apacketmode sub-channel andmight be applied to some data-groups or to all data-groupsof a data application. A selective protection allows attractive service models, where theunscrambled part of an application can be used by any customer and receiver and theencrypted parts only by a subset. An example is a sports service, based on Journaline (seesection 4.5.2): A table containing the results of the German Soccer League can beconsumed by the public, whereas the information about the goal scorers etc. is encryptedand therefore addressed only to entitled users.
2.4.3.3 DAB MOT Encryption
Data applications that use the MOT directory mode, e.g. BWS, can be encryptedusing an access control system on MOT level, see Figure 2.27. Within the same dataapplication, scrambled objects can exist next to unscrambled ones. This leads toattractive business models. A weather service that uses MOT Broadcast Website(see section 4.4.2) is an example: Nationwide weather maps are presented by allreceivers. Whereby regional weather forecast and additional information, e.g. windstrength can be decoded and presented only by entitled receivers that own theadequate usage rights and keys.
The MOT directory itself, which describes its structure, remains unscrambled.In contrast to sub-channel encryption, scrambling on data-group level and on MOT
level can be seen as an ‘object protection’ that extends the classical conditional accessprospect as ‘transport-channel-protection’.
Audio Encoder
Packet MultiplexAssembler
Data GroupAssembler
DAB Multiplexer
PAD
Audio Program
MOT Directory Mode
MOT Header Mode
IP Tunneling
TDC
…
CA System
Figure 2.26 Location of access control system on DAB data-group level
System Concept 65
![Page 96: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/96.jpg)
2.5 Service Information
2.5.1 Introduction
Service Information (SI) provides additional information about the services carried in anensemble and is intended to simplify service access and to provide attractive receiverfeatures and functionality. Similar information carried in other ensembles and/or in FM(with or without RDS), DRM, AM (with or without AM Signalling System (AMSS))services may also be signalled. Unlike the MCI (Multiplex Configuration Information),SI features are optional, that is broadcasters and receiver manufacturers may choosewhich to implement and when. An exception to this general rule is the user applicationinformation coded in FIG type 0 Extension 13. If data applications are broadcast, FIGtype 0 Extension 13 must be used to signal type and parameters of the data application.
2.5.2 Coding of Labels
The Service Information uses various labels to textually identify ensemble, services,service components, X-PAD user applications or regions. All labels are encoded accord-ing to the same scheme.
Labels are encoded using FIG type 1 and optionally FIG type 2. In earlier revisions ofthe DAB standard, only FIG type 1 was used to signal labels of 16 bytes. Various Latinbased characters sets were provided, but most receivers only supported the character set‘Complete EBULatin based repertoire’. This character set is suitable for many Europeancountries, but not sufficient for international use like in Asian countries such as Korea orChina. With the addition of the character set ISO 10646, many more characters aresupported. ISO 10646 characters are encoded with UTF-8 (variable number of bytes percharacter) or UCS-2 (two bytes per character). Therefore, while a 16 byte label usingcharacter set ‘Complete EBU Latin based repertoire’ (one byte per character) permitslabels comprising up to 16 characters, with character set ISO 10646 the length of the label
Data GroupAssembler
CA System
MOT DirectoryData Carousel
MOT Directory ModeUser Applications
PAD Inserter
Packet Inserter
Figure 2.27 Location of access control system on DAB MOT level
66 Digital Audio Broadcasting
![Page 97: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/97.jpg)
was reduced to 5 (UTF-8 encoding) or 8 (UCS-2 encoding) Chinese characters. ManyEuropean receivers would also simply ignore the character set indicator and thus try todisplay Korean or Chinese labels with ‘Complete EBU Latin based repertoire’ charac-ters, thus showing nonsensical labels.
In order to maintain backwards compatibility to existing receivers and increase themaximum label length for Asian characters, FIG type 2 was introduced. FIG type 2supports labels of up to 16 characters. Since each character may comprise multiple bytes,the size of the label in bytes may be more than 16 bytes, e.g. up to 64 bytes in UTF-8encoding. Therefore FIG type 2 supports segmentation of labels. A label can be segmen-ted into up to 8 FIGs. The only permitted character set for FIG type 2 labels is ISO 10646.UTF-8 or UCS-2 encoding may be used. Both encodings use the same character set andonly differ in the way a character number is encoded. UTF-8 uses a variable number ofbytes per character, one byte to encode US-ASCII characters, two bytes for Europeanspecial characters such as ‘a’, ‘a’, ‘n’ or Greek, Cyrillic, Arabic, Hebrew, and three bytesfor most other characters. With up to 6 bytes per character, UTF-8 is able to addressall 231 characters supported by ISO 10646. UCS-2 always uses two bytes per character.UCS-2 can therefore address the first 216 (i.e., 65536) characters of ISO 10646, the socalled Basic Multilingual Plane (BMP). UTF-8 is the more efficient encoding if mostcharacters of the label are US-ASCII (i.e., they require a single byte per character)whereas UCS-2 is more efficient for most Asian scripts.
A receiver supporting FIG type 2 must support both UCS-2 and UTF-8 encoding. It isup to the broadcaster to choose the most efficient encoding individually for each label. Ifthe broadcaster provides a label of FIG type 2, then he must also provide a FIG type 1label with the same extension using the character set ‘Complete EBU Latin basedrepertoire’.
ISO 10646 defines several thousand characters, but the receiver is not required to beable to render all characters. If a receiver is unable to display a FIG type 2 label, it mustrevert to the FIG type 1 label. The support of FIG type 1 labels and the ‘Complete EBULatin based repertoire’ character set is therefore the minimum requirement for a receiverthat presents labels. A more advanced receiver will also support ISO 10646 with bothUCS-2 and UTF-8 encoding for FIG type 1 and FIG type 2 labels. The supportedcharacters will depend on the target market.
FIG type 2 Extension 7 can be used to define characters using a 24� 24 pixel grid.This feature is mainly used for Chinese characters not included in ISO 10646.Therefore a pixel grid is used that seems oversized for European characters, but isnecessary for Chinese. FIG type 2 Extension 7 can be used to define characters thatISO 10646 does not provide (e.g., rarely used Chinese characters) or logo type images.The character number will be from the ‘private use zone’ (character codes 0xe000 to0xf8ff) of the Basic Multilingual Plane (BMP) of ISO 10646. A character definitionusing FIG type 2 Extension 7 is valid for all labels signalled within the ensemble(including Dynamic Labels, see section 4.5.1).
Both FIG type 1 and FIG type 2 labels encode up to 16 characters and a character flagfield of 16 bits (2 bytes). The 16 characters provide plain textual information. The characterflag field is used to extract up to 8 characters from the provided 16 characters for displaysthat cannot present the full label. It contains a flag for each character in the label. When abit is set to ‘1’, the corresponding character of the label is included in an abbreviated label
System Concept 67
![Page 98: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/98.jpg)
for display on receivers having a display of less than 16 characters. An example is shown insection 2.5.3.1. If the label comprises less than 16 characters, then the unused bits in thecharacter flag field (having no corresponding character) must be set to ‘0’.
2.5.3 Basic Service Information
2.5.3.1 Ensemble Label
The ensemble label coded in FIG type 1 Extension 0 and FIG type 2 Extension 0 containsthe Ensemble Identifier (EId) and a character field formed by a string which provides thelistener with a clear textual description for the ensemble.
Example 2.1:
Ensemble label 16 characters: __BBC_National__
Character flag field: 0011111110000100
Ensemble label 8 characters: BBC_Natl
2.5.3.2 Date and Time
The date and time information in DAB is encoded in MJD (Modified Julian Date) andUTC (Co-ordinated Universal Time) fields. The MJD field is a continuous count of thenumber of days elapsed since 17 November 1858. The UTC field encodes the currenttime. As the name implies, MJD and UTC fields do not encode local time, but alwaysUTC (CoordinatedUniversal Time), also referred to as Zulu time (Z). UTC is commonlyused for communication systems, since it avoids confusion about time zones and daylightsaving time.
The date and time feature is encoded in FIG type 0 Extension 10 which containsbesides the MJD field and the UTC field also a Leap Second Indicator (LSI) and aconfidence indicator. The ensemble provider should set the leap second indicator to ‘1’throughout a UTC day that contains a leap second at the end of the same day. A leapsecond can theoretically occur at the end of any UTCmonth; but it is typically scheduledat the end of 30 June or 31 December. The leap second is introduced after 23:59:59 UTC.The confidence indicator is set to ‘1’ when the time information is within an agreedtolerance. The MJD is coded as a 17-bit binary number that increments daily at 00:00(UTC) and extends over the range 0–99999. The following formula allows theMJD to becalculated from the year (Y), month (M) and date (D):
MJD¼ 14956 þ D þ int (((Y � 1900 � L) � 365.25) þ int ((M þ 1 þ L�12) � 30.6001).
For January and February (i.e. for M¼ 1 or M¼ 2) variable L¼ 1, otherwise L¼ 0.
Example 2.2:
28 October 2004!MJD¼ 14956 þ 28 þ int (((2004 � 1900 � 0) � 365.25) þ int ((10 þ1 þ 0�12) � 30.6001)¼ 53306.
68 Digital Audio Broadcasting
![Page 99: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/99.jpg)
FIG 0/10 allows the time information to be provided at two different resolution levels.The standard resolution allows the time to be expressed in 1 minute intervals (short formof FIG 0/10) whilst the high-resolution level allows timing to be expressed in millisecondintervals (long form of FIG 0/10). Five bits are used to represent the hour (in the range0–23) and 6 bits are used to represent the minutes. The long-form version containsadditionally a 6-bit ‘seconds’ and a 10-bit ‘milliseconds’ sub-field.
Data applications such as theMOT Slideshow or the Electronic ProgrammeGuide usethe time provided by FIG 0/10 as the reference time. For applications that use FIG 0/10as the reference time, an internal clock is required that is synchronised to the referencetime sent by FIG 0/10. This internal clock must provide seconds accuracy no matterwhether FIG 0/10 is broadcast in short form or long form.
If the short form version of FIG 0/10 is used, then throughout the minute (seconds00 to 59) the same FIG 0/10 will be broadcast. Therefore the receiver has to waitfor a change in FIG 0/10 in order to determine when the (next) minute starts. Thiscomplicates synchronisation of the internal clock to the time sent by FIG 0/10 andprovides poor accuracy. If the long form version is used, then after receiving a singleFIG 0/10, the internal clock can be set very accurately. The time informationcarried in FIG 0/10 shall be taken to be the time of transmission of the start ofthe null symbol in the transmission frame carrying the time information in one ofits FIBs.
It is recommended to use the long form version of FIG 0/10. If bit-rate for FIG 0/10 islimited, then it is recommended to reduce the repetition rate of FIG 0/10, but still use thelong form version.
Example 2.3: 2004-10-28 14:45:25.050 (28 October 2004 at 14 h 45 min 25 sec 50 ms):
MJD Hours Minutes Seconds Milliseconds
1101000000111010 01110 101101 0110001 0000110010
(53306¼ 28 Oct 2004) (14) (45) (25) (50)
2.5.3.3 Country, Local Time Offset, International Table
A number of basic, and mostly static, ensemble parameters are encoded in FIG type 0Extension 9 (FIG 0/9):
The Ensemble ECC (Extended Country Code) specifies together with the country codeof the EId a worldwide unique ensemble identifier. In an international ensemble it ispossible to assign different ECCs to services. This is done in the extended field. TheECC is crucial for TMC (see section 4.6.1).
The Ensemble LTO defines the local time offset of the ensemble from the UTCtransmitted in FIG type 0 Extension 10 (see section 2.5.3.2). It is expressed inmultiples of half an hour (in the range �15.5 hours to þ15.5 hours). It ispossible that some services use a different LTO. This can be signalled in theextended field.
System Concept 69
![Page 100: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/100.jpg)
The Inter. Table Id indicates which international table is applicable in the ensemble.Two international tables are defined:
• Table 00000001 comprises the European table of RDS PTY codes (except forcodes 30 and 31) as specified in [EN 50067] and the table of announcement typesspecified in [EN 300401].
• Table 00000010 comprises the RBDS list of PTY codes as specified in the RBDSstandard and the table of announcement types specified in [EN 300401].
The coding allows the definition of future table identifiers, for example for use in Asian orAfrican countries where there might be a need for another list of PTys and/ or another listof announcement types. The use of different international tables in one ensemble is notallowed. In Europe only Table 00000001 is applicable.
2.5.3.4 FIC Redirection
When there is a risk of overload in the FIC some FIGs may be transferred either asa whole or in part to the Auxiliary Information Channel (AIC). The AIC usespacket mode transport. FIC redirection is encoded in FIG type 0 Extension 31.The FIG type 0 flag field, the FIG type 1 flag field and the FIG type 2 flag fieldindicate which FIGs of type 0, type 1 or type 2 are carried in the AIC. All MCIFIGs should remain in the FIC. FIGs applying to other ensembles may be entirelytransferred to the AIC. Other FIGs may be present partly in the FIC and partly inthe AIC. For some of them the information is repeated more frequently in the FICthan in the AIC or vice-versa. This ensures that those receivers not equipped with apacket mode decoder will be able to access the basic data features though theirperformance may be inferior to other receivers. At the time of writing most receiversare not able to decode the AIC.
2.5.4 Service-related Information
2.5.4.1 Programme Service Label and Data Service Label
The service label feature provides the listener with a textual description of theservice name. The character field is linked to a machine-readable Service Identifier(SId). In the case of a programme service label the SId comprises 16 bits and issimilar in format to the RDS Programme Identification (PI) code: the 4 MSBsform the Country Id which distinguishes between 15 countries while the remaining12 bits are the service reference. In the case of a data service label the SIdcomprises 32 bits: the 8 MSBs represent the service ECC, the next 4 bits theCountry Id and the remaining 20 bits the service reference. The label of programmeservices is encoded in FIG type 1 Extension 1 and FIG type 2 Extension 1, thelabel of data services is encoded in FIG type 1 Extension 5 and FIG type 2Extension 5.
70 Digital Audio Broadcasting
![Page 101: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/101.jpg)
Example 2.4: service labels
Programme ServiceLabel
Data ServiceLabel
FIG FIG 1/1 or FIG 2/1 FIG 1/5 or FIG 2/5
SId 16 bits 32 bits
4 bits Country Id 8 bits service ECC
12 bits service reference 4 bits Country Id
20 bits service Reference
Example of service _ _BBC_R1_Digital_ _ _RADIO_1_TMC_ _ _
label: 16 characters
character flag field 01111111100000000 011 0 0 000111 1 1 100
Service label 8 characters _BBC_R1_ _ R1_TMC_
2.5.4.2 Service Component Label
Service component labels are useful for the user to distinguish between service compo-nents of the same type. All service components are accessed at the service level, whichmeans that service components can only be requested after their parent service has beenselected. The receiver is required to support an additional layer of access: firstly to offerthe services and present the primary service component. If the service also comprisessecondary service components, then the receiver has to offer the components of thechosen service. The service component label is encoded in FIG type 1 Extension 4 andFIG type 2 Extension 4. The SCIdS is used to identify the service component within theservice.
Service component labels may change frequently. It is recommended that the receiverfollows any changes to these labels to avoid obsolete information remaining in thedisplay.
Example 2.5: Service ‘RADIO 1’ with SId¼F123 (hex) and service label ‘RADIO 1’ hasin addition to the primary service component two secondary (audio) service componentslabelled as ‘RADIO 1 EXTRA’ and ‘RADIO 1 PLUS’:
Service Service Label SCIdS Service Component Label
F123 RADIO 1 0001 RADIO_1_ EXTRA
0010 RADIO_1_ PLUS
System Concept 71
![Page 102: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/102.jpg)
2.5.4.3 User Application Information
A DAB user application is a data application specified in a standard other than [EN300401]. This implies that Dynamic Labels (see section 4.5.1) are not considered to be auser application. The most important information regarding data applications is the userapplication information provided in FIG 0/13. It tells the receiver which applicationsoftware is needed to decode and present the broadcast data. The user applicationinformation is not part of the MCI and can thus be changed without needing a multiplexreconfiguration. For data service components (e.g., data applications transported in apacket mode sub-channel, a streammode sub-channel or the FIDC), there will always beexactly one user application per service component. In case of data applications carriedin the PAD channel of an audio service component, there can be up to six user applica-tions per audio service component. All user applications within the PAD channel must bedescribed by one single FIG 0/13 per audio service component.
For user applications carried in the PAD channel of an audio service component, FIG0/13 also specifies DSCTy and other transport related parameters. Data service compo-nents signal the same parameters, but encoded in FIG 0/2 or FIG 0/3. The parameterX-PAD Application Type is used to separate the applications streams. The X-PADApplication Type (AppType) in a PAD channel thus has similar functionality as thepacket address in a packet mode sub-channel.
Example 2.6:
Service ‘RADIO 1’ with SId¼F123 (hex) and service label ‘RADIO 1’ has one primaryprogramme service component with two X-PAD user applications; both X-PAD userapplications are encoded in the same FIG 0/13:
Service Service Label SCIdS User Application Type X-PAD App Type DSCTy
F123 RADIO 1 0001 0�002 12 60
(Slideshow) (MOT)
0�44A 4 5
(Journaline) (TDC)
2.5.4.4 X-PAD User Application Label
X-PAD user application labels are useful for the user to distinguish between severaluser applications in the PAD channel of an audio service component. All X-PADuser applications are accessed at the audio service component level, which meansthat an X-PAD user application can only be requested after its parent service andthen its (audio) service component has been selected. The X-PAD user applicationlabel is useful if the PAD channel carries multiple data applications that can not allbe presented at the same time. For instance, if two Slideshows are carried in thesame PAD channel, then the receiver might show the X-PAD user application labels
72 Digital Audio Broadcasting
![Page 103: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/103.jpg)
to the user for selection. The X-PAD user application label is encoded in FIG type 1Extension 6 and FIG type 2 Extension 6. The SCIdS identifies the service compo-nent within the service and the X-PAD AppType identify the X-PAD userapplication.
X-PAD user application labels may change frequently. It is recommended that thereceiver follows any changes to these labels to avoid obsolete information remaining inthe display.
Example 2.7: Service ‘RADIO 1’ with SId¼F123 (hex), and service label ‘RADIO 1’ hasone primary programme service component with two X-PAD data applications labelled‘WEATHER’ and ‘TRAFFIC’:
Service Service Label SCIdS X-PAD AppType X-PAD user application label
F123 RADIO 1 0001 12 WEATHER
4 TRAFFIC
2.5.4.4 Service Component Trigger
The beginning or the end of the transmission of a service component can be signalled bymeans of the Service Component Trigger (SCT) feature. It is primarily used with dataservices or multimedia services. In the case of receivers processing the FIC or the AIC in acontinuous way, the SCT may be transmitted in the FIC or in the AIC at any time inorder to signal the beginning or end of the transmission of a service component. The sameSCT may be transmitted several times without any constraint on the transmission time.If a receiver is a member of a service user group and it satisfies the access conditions, itshall look for the service carried in theMSC in stream or packet mode or in the FIDC, atthe time indicated by the SCT. Since there may be a delay between the real time of thereception of the service (component) and the time indicated in the SCT, the SCT shouldbe transmitted by enough time in advance. For the start of the service, the actualbeginning of the reception of the service (component) shall be later than the timeindicated in the SCT. For the end of the service (component), when signalled, the endtime indicated shall be later than the actual end time.
The SCT feature is encoded in FIG type 0 Extension 20 (FIG 0/20) which comprisesthe service component description in terms of the service component type (ASCTy orDSCTy). This FIG also signals where the component is located: in the FIDC or in theMSC in streammode (short form of FIG 0/20) or in the MSC in packet mode (long formof FIG 0/20). FIG 0/20 further contains a number of flags. One of the flags signalswhether the Logical Frame Number (LFN) applies to the beginning or end of servicetransmission. Another flag is used to signal whether the optional service user groupinformation (defining specific groups of receivers) is present or not. Additional informa-tion may be provided to signal the time (UTC in 1 minute resolution) and conditionalaccess parameters (CAId, SCCA).
System Concept 73
![Page 104: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/104.jpg)
If the time value is set to ‘0’, or is absent, and if LFN¼ ‘‘1FFF’’ (hex), thetransmission of the indicated service (component) is considered to have just startedor ended.
2.5.4.5 Programme Number
The Programme Number (PNum) is a code that enables receivers and recorders designedto make use of this feature to respond to the particular programme item(s) that the userhas pre-selected. In a receiver PNum may be implemented in a similar way as PTy inWATCH mode (see also section 2.5.5.2). However, whereas PTy WATCH is used toswitch on or record a particular genre of programme, PNum allows a specific programmeto be switched on or recorded.
PNum uses the scheduled programme time of the programme, to which the day ofthe month is added in order to avoid ambiguity. PNum together with the SId of theservice that has scheduled the programme item form a unique identifier for thisprogramme item. PNum is similar to the 16-bit PIN (Programme Item Number) inRDS. The first 5 MSBs (b15 to b11) represent the day of the month, in the range 01–31,the next 5 bits (b10 to b6) the hour, in the range 00–23, and the final 6 bits (b5 to b0) theminute, in the range 00–59. When the date part (b15 to b11) of PNum¼ 00000 specialcodes are allowed for the hours and minutes to signal a status code, a blank code or aninterrupt code. PNum is encoded in FIG type 0 Extension 16 where it is associated withthe SId to provide a unique reference for each programme. The Continuation flagindicates whether or not there will be a planned interruption while the Update flagindicates a re-direction to a different service (New SId) and time (New PNum). NewSId thus indicates the SId of the target service of the redirection while New PNumspecifies the new emission time or the time at which the programme will be resumed. Itis coded in the same way as PNum.
The high data rate available in DAB makes it possible to develop more elaborateElectronic Programme Guide (EPG) systems for selection of services and programmes(see section 5.5).
2.5.5 Programme-related Features
2.5.5.1 Service Component Language
The Service Component Language (SC Lang) feature signals the language associatedwith the content of a service component. It is used for service (component) selectionbased on language rather than the SId, which is required for conventional serviceselection.
SC Lang serves two purposes:
1. In the case of audio service components, SC Lang is used to identify the spokenlanguage associated with the audio content of a service component. SC Lang isrequired whenever a programme service has more than one secondary servicecomponent in a different language. If a service has no secondary service compo-nents (only a primary service component) then PTy language in FIG 0/17 (see
74 Digital Audio Broadcasting
![Page 105: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/105.jpg)
section 2.5.5.2) is used to signal the language of the programme. In this case SCLang provides complementary redundant information that can be used forconfirmation purposes.
2. In the case of data service components, SC Lang is used to identify the languageassociated with the content of the data. It allows the user to select data servicecomponents by dint of language.
SC Lang is encoded in FIG type 0 Extension 5 (FIG 0/5) where the language is associatedwith either the SubchId, the FIDCId or the SCId depending on whether the component iscarried in theMSC in streammode, in the FIC or in theMSC in packet mode. In the firstcase the short form of FIG 0/5 is used (L/S flag¼ ‘0’), in the latter case the long form isused (L/S flag¼ ‘1’). The MSC/FIC flag indicates whether, in the short form, thecomponent is carried in the MSC in stream mode or in the FIC.
Example 2.8: The SCLang for a service component carried in theMSC in streammode isSwedish in sub-channel ‘3’ and Finnish in sub-channel ‘4’:
L/S MSC/FIC flag SubchId Language
0 0 (MSC) 000011 (3) 00101000 (0x28)¼ Swedish
0 0 (MSC) 000100 (4) 00100111 (0x27)¼Finnish
SC Language versus PTy Language
It is important to notice the subtle difference between SC language (FIG type 0Extension 5) and PTy language (FIG type 0 Extension 17). SC Lang can be used tosignal the language of any service component within an ensemble, being primary orsecondary, audio or data. PTy language is intended to be used in combination withthe programme types and it signals the language of the primary service componentof a service. In addition, one language can be signalled for the secondary servicecomponent(s). Whereas SC language cannot be used to signal the language ofservice components in another ensemble, PTy language can be cross-referenced toanother ensemble.
Whenever both SC language and PTy language are implemented their language fieldsshould be consistent, that is, SC language should be equal to PTy language. If all serviceswithin an ensemble are in the same language, there is basically no need for signalling SClanguage. However, its use is strongly recommended because some receivers may haveimplemented a language filter based on SC language. In the case of static PTy language,the SC language should also be static. If the service provider has a service with pro-grammes targeted at different language audiences then it should signal the languagedynamically. If it has no means for dynamic signalling, static signalling is allowed oncondition that the PTy language is set equal to ‘0’. SC language in this case is nottransmitted.
System Concept 75
![Page 106: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/106.jpg)
2.5.5.2 Programme Type
The PTy feature provides another means of service access based on the categorisation ofprogramme content by the service provider and the transmission of codes representingthese categories to the receiver. The PTy classification in DAB has been extended beyondthe 32 potential categories available with RDS. More than one code can be assigned at atime. This reduces the number of times that code ‘0’ (no PTy) need be used and allowsprogrammes to be more accurately described.
Static and Dynamic PTy Codes
Service providers may wish to implement the PTy feature in different ways. The firstway minimises the expense of the studio infrastructure by keeping the codes relativelystatic. This approach serves to reflect the general service flavour, that is PTy codes (aswell as the language, if signalled) are assigned to a service and remain unchanged for along period and may be used to SEARCH for specific programme categories. It isobvious that in this case the PTy may not reflect the actual on-air programme butrather the format or genre of the service as a whole. Secondly, the PTy feature may beoperated in a dynamic mode. In this case the code changes at programme itemjunctions, for example, from NEWS to SPORT or from NEWS in SWEDISH toNEWS in FINNISH. Dynamic PTy allows the receiver to operate in the WATCHmode as well as in SEARCH or SELECTION mode. Four PTy codes can be allocatedto the primary service component of a programme service: two static PTy codes andtwo dynamic PTy codes.
The Int.code and Language Fields
PTy is encoded in FIG type 0 Extension 17 (FIG 0/17) where the SId of a service is linkedto a language field, an Int. (International) PTy code and an optional complementaryPTy code.
SId S/D Language Int.code
A301 1 00001000 01110 (14)
German Classics
8217 1 00011101 00011 (03)
Dutch Information
F238 1 00001111 00100 (04)
French Sport
E265 1 00001010 01111 (15)
Spanish Other music
76 Digital Audio Broadcasting
![Page 107: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/107.jpg)
PTy of Primary and Secondary Service Components
The PTy categorisation applies to the primary audio service component of a service.Secondary service components, if available, cannot be individually categorised.They should be of the same ‘type’ as the primary component but they may ormay not be given the same language. One language code can be assigned to aservice, regardless of how many secondary components there are. The languagetherefore applies to the primary component, which is signalled by the P/S flag inFIG 0/17 being set to ‘primary’. There is one situation where the language of asecondary component can be signalled. This is when the service comprises only twoaudio components, one primary and one secondary, and these two components havedifferent languages.
Example 2.9: Suppose a Swedish service E456 has on-air a news programme in Swedish(as primary SC) and in Finnish (as secondary SC). This can be signalled by means of twoFIGs 0/17:
SId S/D flag P/S flag L flag CC flag Language Int.code
E456 1 (dynamic) 0 (primary) 1 0 00101000 00001
Swedish News
E456 1 (dynamic) 1 (secondary) 1 0 00100111 00001
Finnish News
It is important to notice that when a service comprises secondary service components aSEARCH or WATCH will basically yield the primary service component.
Example 2.10: Service F123 with PTy code¼ SPORT has a primary service componenttransmitting a report of a TENNIS match and at the same time a secondary servicecomponent transmitting a report of a FOOTBALL match. A SEEK or a WATCH forSPORT will yield the report of the TENNIS match. If a service contains one (and notmore than one) secondary service component in a different language a WATCH for the(common) PTy will yield the component in the desired language if the receiver has alanguage filter based on PTy language. In Example 2.9, of the Swedish service E456, aWATCH for NEWS in FINNISH will directly yield the Finnish news on the secondaryservice component of that service.
2.5.6 Announcements
The announcement feature is similar to the traffic announcement feature of RDS but ona larger scale, providing more categories such as news flashes or weather bulletins.Sixteen announcement categories can be coded of which 11 are currently defined.
System Concept 77
![Page 108: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/108.jpg)
2.5.6.1 The Interrupt Mechanism
Just like TA in RDS (see section 5.4.3) the announcement feature in DAB allows alistener to be directed from the current service/audio source to a programme service,which delivers a short audio message.
It is important to notice the subtle difference between the announcement feature andvectored dynamic PTys. ‘News announcements’ for example are basically short flashes,dynamic and unscheduled for short vectored interrupts. PTy ‘News’ on the other handdenotes a ‘type of programme’ which mostly lasts tens of minutes and which is scheduledin advance according to a programme number (see also section 2.5.4.5).
The DAB announcement interruption mechanism is dependent on the following filtercriteria:
The type of announcement, i.e. is the type of announcement supported by the service andhas the user selected it?
For every service which is allowed to be interrupted by announcements, staticannouncement support information is provided in FIG type 0 Extension 18 (FIG 0/18), which comprises 16 announcement support (Asu) flags. These indicate theannouncement types (supported within the current ensemble) which can interruptthe service. This information may be used by the listener to select those announcementtypes for which he or she wants the audio source to be interrupted and to deselectthose for which he or she doesn’t want an interruption. The announcement switchinginformation in FIG 0/19 comprises an announcement switching (Asw) flags fieldindicating the type of ongoing announcement; the SubChId to identify the sub-channel that generates the announcement, the cluster Id to identify the cluster towhich the announcement is directed and optionally the region for which the announce-ment is applicable. The Asu flags are independent of the cluster Id. A special imple-mentation of the announcement feature employs a dedicated announcement channeloccupying its own sub-channel.
The cluster Id, i.e. does the service belong to the cluster to which the announcement isdirected?
A cluster represents a group of services to which an announcement is directed with theintention of interrupting all the services participating in the cluster. A cluster Id cantherefore be considered as ‘a permission-to-interrupt’ indicator. The announcementsupport information of FIG 0/18 includes a list of cluster Ids, which identify thoseannouncement clusters a service is participating in. If an announcement is sent to acluster that is not in the list, it will not interrupt the service. Cluster Id 0000 0000 specifiesthat an ongoing announcement is intended to interrupt the (audio) service components ofall services having the signalled sub-channel identifier in their service organisationinformation. Cluster Id 1111 1111 is used for alarm announcements. The alarmannouncement deviates from the other announcement types in that Cluster Id11111111 causes the receiver to interrupt all services in the ensemble.
The Region Id (optional), i.e. does the service belong to the region to which the announce-ment is targeted and has the user selected this region?
When an announcement is targeted to a particular geographical region, the Region Idis appended to the announcement switching information of FIG 0/19. When the Region
78 Digital Audio Broadcasting
![Page 109: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/109.jpg)
Id is absent the announcement is targeted to the whole ensemble service area. In thereceiver a region filter is considered to be a valuable tool that can allow listeners to selectinformation about any region in the ensemble service area and not just in the area wherethe receiver is situated.
The New flag, i.e. is the announcement that is being broadcast a new message or not?The New flag, signalled in the announcement switching information, is used by the
service provider to distinguish between amessage that is being broadcast for the first time(‘new’) and a message that is repeated (‘old’). The New flag is suited for a cyclicannouncement channel, that is a sub-channel reserved for repeated emission ofannouncements and possibly not belonging to a specific service. The detection of theflag by the receiver allows the listener (if desired) to avoid being interrupted by repeatedmessages announcements.
2.5.6.2 The Cluster Concept
Suppose a service provider is operating five services grouped in following three clusters:
Cluster Id 0000 0111 (7) Cluster Id 0000 1000 (8) Cluster Id 0000 1001 (9)
F301 (Radio 1) F301 (Radio 1) F302 (Radio 2)
F302 (Radio 2) F303 (Radio 3) F304 (Radio 4)
F303 (Radio 3)
An example of possible announcement support information for these services by meansof several FIGs 0/18 is shown below:
Example 2.11: Announcement support information
Sid Asu Flags No. of Clusters Cluster Id 1 Cluster Id 2
F301 0000010000110010 00010 00000111 (7) 00001000 (8)
Radio 1 Traffic, News, Weather, Finance (2)
F302 0000000001000000 00010 00000111 (7) 00001001 (9)
Radio 2 Event (2)
F303 000001000001000 00010 00000111 (7) 00001000 (8)
Radio 3 Finance (2)
F304 0000001000000010 00001 00001001 (9)
Radio 4 Sport, Traffic (1)
System Concept 79
![Page 110: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/110.jpg)
Assume that at a certain moment Radio 1 generates an area weather flash. Radio 1is participating in two clusters: 7 and 8. If the service provider does not want to disturbthe listeners of Radio 2 then it will direct, in the announcement switching informationof FIG 0/19, the weather flash to cluster ‘8’ so that only Radio 3 listeners may beinterrupted.
Cluster Id Asw flags New flag SubchId RegionId (lower part)
00001000 0000000000100000 1 011011 (27) 100010 (34)
(8) Weather flash Bretagne
This FIG 0/19 signals that the ongoing announcement is a new ‘weather’ announcement,generated in sub-channel ‘27’, directed to cluster ‘8’ and targeted to region ‘34’(Bretagne). This weather flash will interrupt service F303 if the user has not deselectedit and if either the receiver is located in Bretagne or the user has selected ‘Bretagne’ fromthe region menu.
It is clear that the cluster concept is a powerful tool for the service provider to controlthe interruption of services by the various announcements generated by the services in themultiplex. In multilingual ensembles, for example, the cluster concept can be used toprevent listeners from being interrupted by announcements in a language they don’tunderstand.
2.5.6.3 Other Ensemble Announcement Feature
Other ensemble (OE) announcement support information is encoded in FIG type 0Extension 25 (FIG 0/25) and switching information in FIG type 0 Extension 26 (FIG0/26). The latter is used to signal the identity of the ensemble providing the announce-ment, together with the Cluster Id Current Ensemble and the Cluster Id Other Ensemble.
In the same manner as for the basic announcement feature, the receiver can determinewhether an interruption is permitted. The frequency information (see section 2.5.8.1)together with the EId Other Ensemble allows the receiver to determine the appropriatecentre frequency of the other ensemble. The receiver can then retune to that frequencyand decode the basic announcement switching information (FIG 0/19) in the otherensemble.
Consider several other ensembles with overlapping service areas and covering an areawithin the service area of the ensemble to which the receiver is tuned.When an announce-ment is ready to be broadcast in one of the other ensembles, the announcement switchinginformation (FIG 0/19) for that ensemble is relayed to the provider of the tuned ensembleso that the appropriate OE service announcement switching information (FIG 0/26) canbe generated.
The Region Id specified within the switching information allows the ensemble providerto derive and supply one or more appropriate region identifiers from knowledge of theservice area of the OE service. The Region Ids must be chosen from those defined for use
80 Digital Audio Broadcasting
![Page 111: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/111.jpg)
within the tuned ensemble. When Region Ids are not allocated for the current ensemble,Region Id current Ensemble¼ 000000 must be used. When Region Ids are not allocatedfor the other ensemble the region flag must be set to ‘0’ or Region Id Other ensemble‘000000’ must be used.
Example 2.12: OE announcement support (FIG 0/25):
SId Asu flags No. of EIds EId 1 EId2
F123 0000000000010000 0010 (2) F444 F555
Area weather flash
This FIG 0/25 signals that in two other ensembles (F444 and F555) ‘area weather flash’announcements are supported which can possibly interrupt service F123. It is importantto notice that only one announcement support flag can be set at a time. For each othersupported announcement type a separate FIG 0/25 must be transmitted.
Example 2.13: OE announcement switching (FIG 0/26):
Cluster Id Asw flags Region Id EId OE Cluster Id Region Id
CE CE OE OE
00000010 0000000001000000 100010 (34) F555 00000111 (7) 001110 (14)
(2) Sport report Bretagne Rennes
This FIG 0/26 signals that a ‘sport report’ announcement is now ongoing in the otherensemble F555 where it is directed to cluster ‘7’. This cluster corresponds to cluster ‘2’ inthe current ensemble, so that the announcement can possibly interrupt service F123. Inensemble F555 the event announcement is targeted to region ‘14’ (Rennes) which maps toregion ‘34’ (Bretagne) in the current ensemble.
2.5.6.4 FM Announcements Feature
FM announcement support is encoded in FIG type 0 Extension 27 (FIG 0/27). FMannouncement switching is encoded in FIG type 0 Extension 28 (FIG 0/28).
Consider an RDS service covering an area within the DAB ensemble coverage area.When a traffic announcement (TA) is ready to be broadcast on the RDS service, the ‘TA’flag should be relayed to the DAB ensemble provider so that the appropriate FM serviceannouncement switching information (FIG 0/28) can be generated. Great care has to betaken to synchronise the information that is transmitted at the start of the message.Therefore a raised TA flag must be present in the RDS service as long as the
System Concept 81
![Page 112: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/112.jpg)
announcement is going on. The ensemble provider can supply one or more appropriateRegion Ids from knowledge of the service area of the RDS service. The Region Ids mustbe chosen from those defined for use within the tuned ensemble. The selected regionallows the receiver to filter out only those RDS traffic announcements relevant to thatregion. However, RDS services may not be available over the whole DAB ensemblecoverage area. The receiver must therefore check as a background task, using thefrequency information feature (see section 2.5.8.1), which RDS services are currentlyavailable at the receiver’s location. Instead of the listener choosing a particular region(s),the relevant ‘local’ region may be established automatically by using an accurate receiverlocation-finding mechanism based on the TII feature (see sections 2.5.8.3 and 7.3.7) andregional identification features (see section 2.5.8.4).
Example 2.14: FM announcement support (FIG 0/27):
SId Nr of PI codes PI1 PI2 PI3 PI4
F123 0100 (4) FA11 FB22 FC33 FC44
This FIG 0/27 signals that four RDS stations, FA11, FB22, FC33 and FD44, are TPstations on which traffic announcements can be generated which can possibly interruptDAB service F123 in the current ensemble.
Example 2.15: FM announcement switching (FIG 0/28):
ClusterId CE RegionId CE PI
00000001 (1) 001110 (14) Rennes FC33
This FIG 0/28 signals that an ongoing traffic announcement on RDS station FC33(Radio Rennes) is relayed by the DAB ensemble provider to the current ensembleand directed to cluster ‘1’ so that it can possibly interrupt DAB service F123. Asthe traffic announcement from Radio Rennes is rather of local importance, theDAB ensemble provider has decided to target it to region ‘Rennes’ rather thanregion ‘Bretagne’.
2.5.7 Other Ensemble Services
The Other Ensemble Services (OE services) feature indicates which other ensembles arecarrying a particular service. The OE services feature can be used for both programmeservices and data services. The feature is encoded in FIG type 0 Extension 24 (FIG 0/24)where a link between the SId of a service and EIds of other ensembles carrying thatservice is provided.
82 Digital Audio Broadcasting
![Page 113: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/113.jpg)
When the OE flag in the header of FIG 0/24 header is set to ‘0’, FIG 0/24 provides alink between a service carried in the current ensemble and other ensembles carrying thatservice. When the OE flag is set to ‘1’, FIG 0/24 provides a link between a service carriedin another ensemble and other ensembles carrying that service.
Example 2.16 below illustrates the case where a programme service F123 (16 bits) is anunscrambled service which is carried in three other ensembles F444, F555, F666.
Sid Rfa CAId Number of EIds EId1 EId2 EId3
F123 0 000 0011 F444 F555 F666
Although the OE services feature is optional it becomes essential if the frequencyinformation associated with a particular service needs to be signalled. However, areceiver, using the OE information alone in order to present the listener with a listof possible services from which to make a selection would produce a long list forthe whole country, the majority of which may not be available to the listener.Therefore the Transmitter Identification Information (TII) feature (see section2.5.8.3) is important because receivers using TII codes in order to identify thetransmitter(s) they are tuned to estimate their own location. OE information shouldbe kept up to date as far as possible. After a multiplex reconfiguration in anotherensemble there may be some obsolete information sent for some time. This periodshould be minimised.
2.5.8 Tuning Aids
2.5.8.1 Frequency Information
The Frequency Information (FI) feature is used to signal the radio frequencies for otherDAB ensembles and other broadcast services, such as FM (with or without RDS), DRM,AM (with or without AMSS).
When used in combination with the region definition feature (see section 2.5.8.4) ageographical area filter may be provided to allow the receiver to determine which of the(many) frequencies listed are worth checking in the area where it is situated.
The FI feature allows mobile receivers leaving the ensemble coverage area to retune toan alternative frequency (service following). The alternative frequency may apply to anidentical DAB ensemble (same EId), another ensemble carrying the equivalent primaryservice component or an FM (with or without RDS), DRM, AM (with or withoutAMSS) service. The services can be identical (SId¼PI or dummy code) or hard-linked(see section 2.5.8.2). If there is no alternative source for the same component the FIfeature can help receivers to find a primary service component, which is soft-linked to thecurrently selected one.
System Concept 83
![Page 114: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/114.jpg)
The FI feature also helps receivers to get faster access to other DAB ensembles that areavailable in certain regions. An ensemble scan may be speeded up if the receiver knowsthe centre frequencies of all other DAB ensembles.
In combination with the OE/FM announcement feature (see sections 2.5.6.3, 2.5.6.4)the FI feature can establish a link between services and frequencies needed for announce-ment switching. In conjunction with other ensembles or the FMPTyWATCH function FIallows fast access to services starting to broadcast a programme item of the desired type.
FI Lists per Region Id
The FI feature is encoded in FIG type 0 Extension 21 (FIG 0/21) where, per Region Id,one or more FI lists are given. An FI list can contain up to two DAB ensemblefrequencies and up to eight RDS frequencies so that a maximum of four DAB ensemblefrequencies or 17 RDS frequencies can be signalled per region in one FIG 0/21.
Thanks to the Region Id the receiver can check only a restricted and yet directlyrelevant list of alternative frequencies but it requires the receiver to know where it islocated. The Region Id is the full 11-bit version so that the region can, but need not, be alabelled region that is known to the user.
Region Id¼ ‘0’ means that no area is specified. In this case the FI is valid for the wholecoverage area of the signalled ensemble. The R&M field allows differentiating betweenDAB ensembles and FM services (with or withoutRDS), DRMandAM services (with orwithout AMSS; MW in steps of 9 kHz or 5 kHz).
Continuity Flag
The continuity flag is an indication whether ‘continuous output’ can be expected or not,for example, when switching to another DAB ensemble or when switching to equivalentand hard-linked services. The continuity flag may be set to ‘1’ if the conditions listed inTable 2.10 are fulfilled.
The frequency of an ensemble is denoted as geographically adjacent if this ensemble isreceivable somewhere in the region specified in the Region Id field. This is important inthe case of a multiple frequency network (MFN) comprising several SFNs at differentfrequencies. Not-geographically-adjacent-area means that it is not guaranteed that theensemble for which the centre frequency is signalled is receivable somewhere in the regionspecified in the Region Id field.
Importance of the OE Flag
Particular attention should be given to the OE flag in the sub-header of FIG 0/21.The OE flag is set to ‘0’ if the FI applies to the whole tuned ensemble or to an FM (with
or without RDS), DRM or AM (with or without AMSS) service carrying a primaryservice component from the tuned ensemble.
The OE flag is set to ‘1’ if the FI applies to frequencies of ensembles other thanthe tuned ensemble or to FM (with or without RDS), DRM or AM (with or withoutAMSS) services which are not identical to a primary service component from thetuned ensemble.
84 Digital Audio Broadcasting
![Page 115: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/115.jpg)
Examples of FIG 0/21
Example 2.17: The following FIG 0/21 illustrates the signalling of the centre frequencyof a DAB ensemble F888 in the region of Marseille. The OE flag is set to ‘1’. Theensemble operates in transmission mode II and is receivable somewhere in theMarseille region so that the control field is coded as 00100, meaning ‘geographicallyadjacent, transmission mode II’.
OE flag RegionId Id field R&M Cont.flag
Length offreq. list
Controlfield
Freq 1
1 0x028 F888 0000 0 011 (3 00100 0x1C53C
Marseille (EId) (DAB) bytes) geog. adj.mode II
(1463.232 MHz)
Example 2.18: The following FIG 0/21 illustrates the signalling of three RDS frequenciesof France Inter for the region of Marseille.
RegionId Id field R & M Cont. flag Length offreq. list
Freq1 Freq2 Freq3
0x028 F201 1000 0 011 0x26 0x2A 0x4F
Marseille (PI) Fr. Inter (RDS) (3 bytes) 91.3 MHz 91.7 MHz 95.4 MHz
Table 2.10 Conditions for putting continuity flag¼ ‘‘1’
In case of frequencies of DABensembles (covering adjacent
areas)
In the control field the transmission mode must be signalled.
If the frequency of an ensemble is signalled, this ensemble must
be synchronised in time and frequency with the current (tuned)ensemble. This means that the null symbols of correspondingtransmission frames must coincide (tolerance¼ guard intervalduration). The centre frequency of the signalled ensemble must
not deviate by more than 10 Hz from the nominal CEPTfrequency.
Services present in the tuned and referenced ensemble shouldhave identical CU start address, sub-channel size and error
protection profile for their primary service component. For theprimary service component the CA conditions need to beunique and the CIF counter values must be equal.
These continuity requirements apply to all frequencies in the
‘‘Freq. list’’ field.
In case of frequencies of
FM/AM services
The time delay between the audio signal of the DAB service and
the analogue service must not exceed 100 ms.
System Concept 85
![Page 116: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/116.jpg)
2.5.8.2 Service Linking
When different services carry the same audio programme, service linking informa-tion is used so signal whether or not the services may be treated as identical; in thiscase the services are said to be ‘hard-linked’ together. The second use allowsservices to be generically related. This means that they do not necessarily carrythe same audio but the kind of programmes supported is similar in some way, forexample different local services from the same service provider. In this case theservices are said to be ‘soft-linked’ together.
When the listener is moving outside the reception area of an ensemble, the servicelinking feature helps the mobile receiver to find alternatives if the originally tuned serviceis no longer available. The listener may in this way ‘follow’ and retain the same pro-gramme. In the case of dual DAB/RDS receivers the feature allows service followingbetween the same service on DAB and on RDS. In the case of simulcast programmes indifferent ensembles or simulcasting on DAB and RDS common identifiers may be usedinstead of service linking because in this case frequency information provides all theinformation needed for service following.
Short and Long Form of FIG 0/6
Service linking is encoded in FIG type 0 Extension 6 (FIG 0/6) which has two versions: ashort form and a long form.
The short form is used for rapid delinking or to signal a Change Event (CEI) andcontains the Linkage Set Number (LSN) together with a number of flags such as the LAflag (Linkage Actuator), the S/H flag (Soft/Hard) and the ILS (International Linkage SetIndicator).
The long form has an Id list of service identifiers appended (PI codes or dummy codesreferring to the linked services).
The LSN is a 12-bit code, unique to each set of services that are actually or potentiallycarrying a common programme.
The LA flag indicates if a service is actually (LA¼ 1) or potentially (LA¼ 0) a memberof the set of programme services described by the LSN.
The ILS flag indicates that the link applies to only one country (national) or severalcountries (international).
The combination of the LSN, ILS and S/H parameters identifies a particular set ofservices and constitutes the ‘‘key’’ for the service linking feature. This key must be uniquefor the area where it can be received and also for any adjacent area. There is no relationbetween sets with a common LSN, but with different settings of the ILS. When a linkceases the LSN may be reused again for another set of services.
The IdLQ (Identifier List Qualifier) in the Id list usage field is used to indicate whetherthe Id in the Id list is a DAB SId, aDRMSid, an AMSS Sid, an RDS PI code or a dummycode.
The Shd flag is a shorthand indicator used to indicate that the identifiers in theId list, having the second nibble in the range ‘4’ to ‘F’, each represents a list of upto 12 services each sharing the same country Id and the same 8 LSBs of the servicereference.
86 Digital Audio Broadcasting
![Page 117: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/117.jpg)
Reference Identifier
If one of the services of a linkage set belongs to the current ensemble the OE flag in theFIG 0/6 header is set to ‘0’. The identifier of this service is a ‘reference identifier’ andmustbe included at the beginning of the Id list regardless of the IdLQ.
Example 2.19: Assume a set of 16 DAB services with SId¼F211, F212, . . . , F227 and aset of 16 RDS services with PI¼F301, F302, . . . , F316.
If the current ensemble contains service F211 then this is a reference service and is putfirst in the Id list. As there are in total 32 services to be put in the Id list, the list has to besplit into four parts, carried in four different FIGs 0/6:
FIG index OE SIV IdlQ Id list
a 0 0 (start list) 01 (RDS PI) F211 (reference), F301, . . . , F311
b 0 1 (cont. list) 00 (DAB SId) F212, F213, . . . , F224
c 0 1 (cont. list) 00 (DAB SId) F225, F226, F227
d 0 1 (cont. list) 01 (RDS PI) F312, . . . , F316
If none of the services belongs to the current ensemble, the OE flag is set to ‘1’. In this caseno reference identifier is defined so that the order of identifiers within the Id list isarbitrary.
Example 2.20: Same assumptions as above except that none of the services in the linkageset belong to the current ensemble:
FIG index OE SIV IdlQ Id list
a 1 0 (start list) 01 (RDS PI) F301, F302, . . . , F312
b 1 1 (cont. list) 00 (DAB SId) F211, F212, . . . , F223
c 1 1 01 (RDS PI) F313, F314, F315, F316
d 1 1 00 (DAB SId) F224, F225, F226, F227
2.5.8.3 Transmitter Identification Information Database
The Transmitter Identification Information (TII) database feature helps the receiverto determine its geographical location. TII codes can be inserted into the synchro-nisation channel of the transmitted DAB signal. The ‘pattern’ and ‘comb’ of the TII
System Concept 87
![Page 118: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/118.jpg)
signals correspond to the MainId (Main identifier) and SubId (Sub-identifier) of thetransmitter.
The TII database feature provides the cross-reference between these transmitteridentifiers and the geographic location (in terms of coarse and fine longitude andlatitude) of the transmitters. This can be useful in cases where a DAB receiverneeds to make a decision to retune to another frequency and the decision criterionis marginal using the TII list alone. The TII database feature provides a muchbetter specified area definition than is possible with only the geographical descrip-tion in the region definition. If signals can be received from three or more trans-mitters, the receiver can use this information to perform a triangulation andpinpoint its position (see section 7.3.7).
The TII database feature is encoded in FIG type 0 Extension 22 (FIG 0/22). The M/Sflag allows differentiation between signalling the reference location of the MainId (M/Sflag¼ 0) and signalling the location of transmitters relative to that reference location (M/S flag¼ 1). The location reference does not necessarily need to coincide with a transmitterlocation, but if it does then the latitude offset and longitude offset are set to ‘0’ for thattransmitter.
For terrestrial frequency planning it may be necessary to delay somewhat the varioustransmitter signals constituting an SFN in order to optimise the combined signal at thereceiver. The TII database feature therefore comprises a TD (Time Delay) field, whichsignals the constant time delay (in microseconds) of the transmitter signal in the range 0to 2047 ms.
In the receiver the latitude of the received transmitter is calculated by converting thetwo’s complement value given in the combined latitude coarse and fine fields (20 bits) toits decimal equivalent and then multiplying this value by 90�/219. The longitude of thetransmitter is calculated in a similar way but the decimal equivalent has to be multipliedby 180�/219. The resolution of latitude is 0.600 which is about 19 metres, while theresolution of longitude is 1.200 which corresponds to about 38 metres at the equator (or19 metres at 60� latitude).
When M/S flag¼ 1 the location of the transmitters relative to the reference location isgiven in terms of the latitude and longitude offset of the transmitter from the referenceassociated with the same MainId. The maximum offset from the reference location thatcan be signalled is 5.625� of latitude and 11.25� of longitude.
Example 2.21 illustrates the case where the reference position corresponds to atransmitter located at 48�07’2900 North and 001�37’3300 West and which has in itsnull symbol a TII code with pattern number¼ ‘3’ and comb number¼ ‘1’,which means that Main Id¼ 0000011 and Sub Id¼ 00001. The latitude isþ48�07’2900 with 07’¼ (07/60) �¼ 0.11666� and 29’’¼ (29/3600) �¼ 0.008055� so thatþ48�07’2900 ¼ 48.1247222�.
In FIG 0/22, for M/S¼ ‘0’, the latitude is coded as a 20-bit number comprising a16-bit latitude coarse field and a 4-bit latitude fine field. A two’s complement numberhas to be calculated such that when the decimal equivalent ‘L’ of this number ismultipliedby 90�/219 the result is þ48.1247222�. L � 90�/219¼þ48.1247222� so thatL¼þ280346.8262¼ 0100 0100 0111 0001 1010 or 0x4471A.
88 Digital Audio Broadcasting
![Page 119: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/119.jpg)
Example 2.22: Calculation of the latitude/longitude coarse and fine fields in FIG 0/22:
Latitude Coarse Longitude Coarse
Geographical co-ordinates 48�07’29’’ (North) 001�37’33’’ (West)
In decimal degrees þ48.1247222� �1.6258333�
Formula L � (90�/219)=þ48.124722 L � (180�/219)=�1.625833
Decimal value of L þ280346 �4735
Binary value of L 0100 0100 0111 0001 1010 0000 0001 0010 0111 1111
One’s complement of L 1111 1110 1101 1000 0000
Two’s complement of L 1111 1110 1101 1000 0001
Value to be put in coarse field 0100 0100 0111 0001 (0x4471) 1111 1110 1101 1000 (0xFED8)
Value to be put in fine field 1010 0001
Since L is a positive number the two’s complement of L corresponds to the binary value.The 16 MSBs of this number are put in the latitude coarse field and the 4 LSBs are put inthe latitude fine field. The values for the longitude coarse and fine fields can be derived ina similar way. Since the longitude is West of Greenwich, value L is negative. Theexamples show how the values to be put in the longitude coarse and fine fields are derivedfrom the two’s complement number.
This results in the following coding of FIG 0/22 for M/S¼ 0 (Main Identifier):
M/S MainId Latitude coarse Longitude coarse Latitude fine Longitude fine
0 0000011 0100 0100 0111 0001 1111 1110 1101 1000 1000 (8) 0101 (5)
(3) (0x4471) (0xFED8)
Since transmitter 3/1 is the reference position the latitude offset and longitude offset areequal to zero so that FIG 0/22 for M/S¼ 1 for transmitter 3/1 would look like:
M/S MainId SubID Time delay Latitude offset Longitude fine
0 0000011 00001 00000000000 0000 0000 0000 0000 0000 0000 0000 0000
(3) (1) (0 ms) (0x0000) (0x0000)
Suppose that around this reference position in the SFN there are three transmitters (3/2, 3/3, 3/4) with MainId¼ 0000011 (3) and with SubId¼ 00010 (2), 00011 (3) and 00100 (4).Suppose that the latitude offset for transmitter 3/2 is 00�13’14’’ North and the longitudeoffset is –000�14’15’’ West (see Example 2.23). The time delay for this transmitter is 14 ms.
System Concept 89
![Page 120: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/120.jpg)
Example 2.23: Calculation of the latitude/longitude offset fields in FIG 0/22
Latitude Offset Longitude Offset
Geographical co-ordinates 00�13’14’’ North 000�14’15’’ West
Decimal degrees þ0.220555� �30.2375�
Formula L � (90�/219)=þ0.220555� L � (180�/219)¼ –0.2375�
Decimal value of L þ1285 –692
Binary value of [L] 0000 0101 0000 0101 0000 0010 1011 0100
One’s complement of L 1111 1101 0100 1011
Two’s complement of L 1111 1101 0100 1100
Hexadecimal value of L 0x0505 0xFD4C
FIG 0/22 for M/S=1 (Sub Identifier) for transmitter 3/2 could look like:
M/S MainId(7 bits)
SubId (5 bits) Time delay(11 bits)
Latitude offset(16 bits)
Longitude offset(16 bits)
1 0000011 00010 00000001110 0000 0101 0000 0101 1111 1101 0100 1100
(3dec) (2dec) (14 ms) (0x505) (0xFD4C)
The coordinates of transmitter ‘3/2’ are þ48�7’29’’ þ00�13’14’’¼þ48�20’43’’ latitude North and–001�37’33’’ –000�14’15’’ ¼ –001�51’48’’ longitude West.
2.5.8.4 Region Definition and Region Label
Geographical regions within an ensemble coverage area can be identified by means of theregion definition feature of FIG type 0 Extension 11 (FIG 0/11) and the region labelfeature of FIG type 1 Extension 3 (FIG 1/3). The region definition feature, which is basedon lists of transmitter identification codes, allows a receiver to determine roughly where itis located. This knowledge allows a receiver to filter out information which is relevantonly to that region. For example, a much shorter list of alternative frequencies can bechecked for service following and alarm announcements can be confined to the regionconcerned.
The region label feature of FIG 1/3 provides a textual description of a region (e.g.Bretagne, Oberbayern, Kent, etc.). Region labels help a listener to select a region inconjunction, for example, with the announcement feature. Traffic information concern-ing the destination and the route can be requested as well as that for the starting point of ajourney. The user can select, say, ‘Kent’ from a region menu if he or she is interested ingetting information from this region or for filtering (traffic or weather) announcements.
90 Digital Audio Broadcasting
![Page 121: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/121.jpg)
A region is uniquely identified by means of an 11-bit Region Id, which is composed oftwo parts: a 5-bit upper part and a 6-bit lower part. This allows up to 2047 regions to beidentified within an ensemble coverage area. The region label uses only the 6-bit lower part(the 5-bit upper part is set to all zeros) so that up to 64 regions per ensemble can be labelled.
Description of a Region
With FIG 0/11 there are two ways to describe a region:
1. By means of a list of transmitter identifiers (TII list). In this case a Region Id isassociated to a group of transmitters with one commonMain Id and different Sub Ids.By means of this list the receiver can determine in which region it is located. This isuseful for receiver processing in the case of frequency information to select a suitablealternative frequency.
Example 2.24:
Region Id Main Id SubId1 SubId2 SubId3 SubId4 SubId5
00000 10110 0001011 00001 00010 00011 00100 00101
(0x002E) (0x0B) Crystal Alexandra Guildford Bluebell Reigate
Greater Palace Palace Hill
London
2. By means of a spherical rectangle. In this case a Region Id is associated to ageographical area in terms of a spherical rectangle from which the coordinates ofthe South-west corner are given as latitude/longitude coarse coded as a 16-bit two’scomplement number. The size of the spherical rectangle is defined by the extent oflatitude/longitude coded as a 12-bit unsigned binary number. Region identificationbased on the spherical rectangle allows navigation systems based on GPS to be usedfor automatic receiver location.
Example 2.25:
RegionId Latitude coarse Longitude coarse Extent of
latitude
Extent of
longitude
00000000001 1101001000111010 1111100111010010 000111111111 000010100000
(0x001) (0xD23A) (0xF9D2) (0x1FF) (0x0A0)
–32�11’12’’ (South) –008�41’26’’ (West) (01�24’12’’) (000�52’44’’)
–156 km –100 km at
equator
System Concept 91
![Page 122: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/122.jpg)
Importance of the G/E Flag
The G/E flag in FIG 0/11 determines the validity area of the Region Id, that is whetherthe Region Id applies to the ensemble (E) coverage area only (e.g. the Bretagne ensem-ble), or to a ‘global’ (G) coverage area, that is the area defined by the country Id andensemble ECC (e.g. the whole of France).
Each ensemble provider in a country may use none, some or all of the globally definedRegion Ids that it finds appropriate for its purposes. All other Region Ids may be definedfor use ensemble-wide, even if they were globally defined through the above-mentionedagreement but not used as global ones in this ensemble.
Suppose that in France there is an agreement to use code 00000001110 (0x000E or14 dec) as a globally defined Region Id to denote ‘Bretagne’. An ensemble provider inParis may use this code in its Paris ensemble to denote ‘Versailles’ on condition that theprovider puts in FIG 0/11 the G/E flag¼ 0 (E) for Region Id 00000001110 and refrainsfrom using it as the global code for ‘Bretagne’.
For announcements in other ensembles or in FM the selected region allows the receiverto filter out only those announcements relevant to that region. However, RDS or OEservices may not be available over the whole DAB coverage area. The receiver musttherefore check as a background task, using the FI feature, which RDS or OE services arecurrently available at the receiver’s location in order to prevent the receiver from retuningto an RDS or OE service and finding that it cannot be received.
92 Digital Audio Broadcasting
![Page 123: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/123.jpg)
3
Audio Services and Applications
3.1 General
The DAB system is designed to provide radio services and additional data services. Thischapter focuses on the main audio services as the central application. The audio servicesuseMPEGAudio Layer II to provide mono, stereo andmultichannel programmes to thelistener. Although the first broadcast applications and receivers will only supply stereoprogrammes, the migration to multichannel services is nevertheless already included inthe system.
Also, data services will become more and more important and one can currently seemany new ideas on their use being developed and tested. Most advanced is the Internet,but it is easy to envisage that the data capacity of the DAB system can be used for verysimilar services, for more details also see Chapter 4.
With the introduction of the compact disc and its 16-bit PCM format, digitalaudio became popular, although its bit rate of 706 kbps per monophonic channel israther high. In audio production resolutions of up to 24-bit PCM are in use. Lowerbit-rates are mandatory if audio signals are to be transmitted over channels oflimited capacity or are to be stored in storage media of limited capacity. Earlierproposals to reduce the PCM rates have followed those for speech coding.However, differences between audio and speech signals are manifold since audiocoding implies higher values of sampling rate, amplitude resolution and dynamicrange, larger variations in power density spectra, differences in human perception,and higher listener expectations of quality. Unlike speech, we also have to deal withstereo and multichannel audio signal presentations. New coding techniques forhigh-quality audio signals use the properties of human sound perception by exploit-ing the spectral and temporal masking effects of the ear. The quality of thereproduced sound must be as good as that obtained by 16-bit PCM with 44.1 or48 kHz sampling rate. If for a minimum bit rate and reasonable complexity of thecodec no perceptible difference between the original sound and the reproduction ofthe decoded audio signal exists, the optimum has been achieved. Such a source
Digital Audio Broadcasting: Principles and Applications of DAB, DAB+ and DMB, Third Edition Edited by W. Hoeg and T. Lauterbach© 2009 John Wiley & Sons, Ltd. ISBN: 978-0-470-51037-7
![Page 124: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/124.jpg)
coding system, standardised by ISO/IEC as MPEG-1, MPEG-2 Audio or newerstandards, allows a bit-rate reduction from 768 kbps down to about 100 kbps orless per monophonic channel, while preserving the subjective quality of the digitalstudio signal for any critical signal. This high gain in coding is possible because thenoise is adapted to the masking thresholds and only those details of the signal aretransmitted which will be perceived by the listener.
3.2 Audio Coding and Decoding
3.2.1 Perceptual Coding
3.2.1.1 General
Two different mechanisms can be used to reduce the bit rate of audio signals. Onemechanism is determined mainly by removing the redundancy of the audio signal usingstatistical correlation. Another one reduces the irrelevancy of the audio signal by con-sidering psycho-acoustical phenomena, like spectral and temporal masking. Only withboth of these techniques, making use of the statistical correlation and the masking effectsof the human ear, a significant reduction of the bit rate down to 200 kbps per stereo-phonic signal and below could be obtained. Such coding schemes are called perceptualcoding, in contrast to other technologies, such as wave form coding, source orientedcoding (like speech coding), or lossless coding. Most of recent perceptual coding systemswere developed by the MPEG (Moving Picture Experts Group) and are standardised inISO/IEC International Standards etc. as described below.
3.2.1.2 Masking of Audio Components
In order to reduce the bit rate of an audio signal whilst retaining the bandwidth, dynamicstructure and harmonic balance, an audio codec has to reduce the quantisation step sizeof the signal. A CD signal is typically quantised with 16 bits per sample, which for a0 dBFS sine wave results in a signal-to-quantisation-noise ratio of 96 dB. Reducing thequantisation step size will increase the quantisation noise relative to the audio signal. Ifthe human auditory system were susceptible to this increase under all conditions, wecould not reduce the bit rate.
Fortunately, the human ear is a very imperfect organ.Whenwe are exposed to a tone atone frequency, this excites the inner ear and the sensory cells in the cochlea in such a waythat signals close (in frequency) to this signal may be inaudible, if their level is sufficientlylow. This effect, which is called masking, decreases with the distance of the so-calledmasker and the masked signal [Zwicker, 1967].
A second imperfection is the fact that we do not hear audio signals below a certainlevel. This forms an absolute hearing threshold.
Both effects vary for human beings and have been measured in the past. They form thebasis of what is called perceptual coding. The way to exploit these effects in a codec is tosplit the signal into small frequency regions (bands) and increase the quantisation noise ineach frequency region such that it is as large as possible while still being masked by thesignals in that frequency region.
94 Digital Audio Broadcasting
![Page 125: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/125.jpg)
The effect of masking of a single sine tone and its combination with the absolute hearingthreshold is depicted in Figure 3.1. Two sine tones, which are masked, are shown in thefigure as well.
In Figure 3.2, the same amount of noise has been added to a sine tone. In the left part ofthe figure the noise has equal amplitude across all frequencies and is therefore audible.In the right half of the figure the noise has the same energy but has been shaped accordingto the masking curve. In this case the noise is inaudible. In the MPEG Audio codecs theshaping of the noise is achieved by splitting the signal into 32 sub-bands before thereduction of the quantisation step size.
The masking properties have been measured for single sine tones and for narrow-band noise signals [Zwicker, 1967]. The amount of masking depends on the natureof a signal and furthermore on the perceived tonality of a signal. The more tonal asignal is, the stronger the masking. It is therefore necessary to measure the tonalityof a component to decide its masking properties. A ready assumption that is madein perceptual coding is that masking also occurs for complex signals, such as musicand speech.
Masked Threshold
Frequency
inaudible
Am
plitu
de (
log)
Figure 3.1 Masking of individual sine tone and absolute hearing threshold
13 dB SNR perceptually shaped noise
Masked Threshold
13 dB SNR with added white noise
Masked Threshold
Frequency Frequency
audible
Am
plitu
de (
log)
Am
plitu
de (
log)
Figure 3.2 Added quantisation noise, without (left) and with (right) shaping
Audio Services and Applications 95
![Page 126: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/126.jpg)
3.2.2 MPEG-1/2 Audio Layer II
3.2.2.1 Basic Principles
The block diagram of the MPEG-1 Audio Layer II encoder, called ‘MUSICAM’[Dehery, 1991] during its time of development and before standardisation in ISO/IEC,is shown in Figure 3.3.
Consequently, Audio Layer II is identical to the MUSICAM coding scheme, whereasAudio Layer I has to be understood as a simplified version of the MUSICAM system.The basic structure of the coding technique which is more or less common to both, LayerI and Layer II, is characterised by the fact that MPEG Audio is based on perceptualaudio coding.
One of the basic functions of the encoder is the mapping of the 20 kHz wide PCM inputsignal from the time domain into sub-sampled spectral components. For both layers apolyphase filterbankwhich consists of 32 equally spaced sub-bands is used to provide thisfunctionality.
The output of a Fourier transform which is applied to the broadband PCM audiosignal in parallel to the filter process is used to calculate an estimate of the actual, time-dependent masked threshold. For this purpose, a psycho-acoustic model, based on rulesfrom psycho-acoustics, is used as an additional function block in the encoder. This blocksimulates spectral and, to a certain extent, temporal masking too. The sub-band samplesare quantised and coded with the intention to keep the noise, which is introduced byquantising, below the masked threshold. Layers I and II use a block compoundingtechnique with a scale factor consisting of 6 bits, valid for a dynamic range of about120 dB and a block length of 12 sub-band samples. With this kind of scaling technique,
Programme-associatedData (PAD)
Data Rate
Scale FactorExtraction
Dynamic BitAllocation
FFT1024 Points
Psycho-acousticModel
Block of 12sub-bandsamples
Codingof SideInfor-
mation
Mono orStereo AudioPCM Signal
DAB AudioFrame
MPEG-1Layer II
bit-stream32–384 kbps
3232
Bit-streamformattingand CRC
Filter bank32 sub-bands
LinearQuantiser
Figure 3.3 Block diagram of theMPEG-1Audio Layer II encoder, as used in the Eureka147DABsystem
96 Digital Audio Broadcasting
![Page 127: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/127.jpg)
Audio Layer I and Audio Layer II can deal with a much higher dynamic range than CDor DAT, that is conventional 16-bit PCM.
In the case of stereo signals, the coding option ‘Joint Stereo’ can be used as anadditional feature. It exploits the redundancy and irrelevancy of typical stereophonicprogrammematerial, and can be used to increase the audio quality at low bit rates and/orreduce the bit rate for stereophonic signals [Waal, 1991]. The increase of encoder com-plexity is small, and negligible additional decoder complexity is required. It is importantto mention that joint stereo coding does not enlarge the overall coding delay.
After encoding of the audio signal an assembly block is used to frame the MPEGAudio bit-stream which consists of consecutive audio frames.
The frame-based nature ofMPEGAudio Layer II leads to a delay through the encode/decode chain which is of the order of two frames (48 ms) when the processing and the tiefor transmission are not taken into account. Typical delays through real transmissionchains are of the order of 80 ms, see also section 2.2.5.
3.2.2.2 Psychoacoustic Model
The psycho-acoustic model calculates the minimum masked threshold, which is neces-sary to determine the just-noticeable noise level for each band in the filterbank. Theminimum masked threshold is the sum of all individual masking curves as described inthe previous section. The difference between the maximum signal level and the mini-mum masked threshold is used in the bit or noise allocation to determine the actualquantiser level in each sub-band for each block. Two basic psycho-acoustic models aregiven in the informative part of the MPEG-1 standard [IS 11172]. While they can bothbe applied to any layer of the MPEG Audio algorithm, in practice most encoders usemodel 1 for Layers I and II. In both psycho-acoustic models, the final output is asignal-to-mask ratio for each sub-band of Audio Layer II. A psycho-acoustic model isnecessary only in the encoder. This allows decoders of significantly less complexity. Itis therefore possible to improve the performance of the encoder even later, by relatingthe ratio of bit rate and subjective quality. For some applications, which do notdemand a very low bit rate, it is even possible to use a very simple encoder withoutany psychoacoustic model.
The fundamental basis for calculating the masked threshold in the encoder is givenby the results of masked threshold measurements for narrow-band signals consider-ing a tone masking noise and vice versa. Concerning the distance in frequency andthe difference in sound pressure level, very limited and artificial masker/test-tonerelations are described in the literature. The worst case results regarding the upperand lower slopes of the masking curves have been considered, assuming that thesame masked thresholds can be used for both simple audio and complex audiosituations.
The output of the FFT is used to determine the relevant tonal (i.e. sinusoidal) andnontonal (i.e. noise) maskers of the actual audio signal. It is well known from psycho-acoustic research that the tonality of a masking component has an influence on themasked threshold. For this reason, it is worthwhile to discriminate between tonal andnontonal components.
Audio Services and Applications 97
![Page 128: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/128.jpg)
It is also known that the perception of the tonality of a component is time dependent.A pure tone is not perceived as tonal initially and builds up over time. This timedependency is part of more sophisticated psycho-acoustic models.
The individual masked thresholds for each masker above the absolute masked thresh-old are calculated depending on frequency position, loudness level and tonality. All theindividual masked thresholds, including the absolute threshold, are added to the so-called global masked threshold. For each sub-band, the minimum value of this maskingcurve is determined. Finally, the difference between the maximum signal level calculatedby both the scale factors and the power density spectrum of the FFT and the minimummasked threshold is calculated for each sub-band and each block.
The block length for Audio Layer II is determined by 36 sub-band samples, corre-sponding to 1152 input audio PCM samples. This difference of maximum signal level andminimum masked threshold is called the signal-to-mask ratio (SMR) and is the relevantinput function for the bit allocation.
3.2.2.3 The Filterbank
A high-frequency resolution is small sub-bands in the lower frequency region, whereas alower resolution in the higher frequency region with wide sub-bands should be the basisfor an adequate calculation of the masked thresholds in the frequency domain. Thiswould lead to a tree structure of the filterbank. The polyphase filter network used for thesub-band filtering has a parallel structure, which does not provide sub-bands of differentwidths. Nevertheless, one major advantage of the filterbank is given by adapting theaudio blocks optimally to the requirements of the temporal masking effects and inaudiblepre-echoes. A second major advantage is the small delay and complexity. To compensatefor the lack of accuracy of the spectrum analysis of the filterbank, a 1024-point FFT forAudio Layer II is used in parallel with the process of filtering the audio signal into 32sub-bands.
The prototype QMF filter is of order 511, optimised in terms of spectral resolution andrejection of side lobes, which is better than 96 dB. This rejection is necessary for asufficient cancellation of aliasing distortions. This filterbank provides a reasonabletrade-off between temporal behaviour on one side and spectral accuracy on the otherside. A time/frequency mapping providing a high number of sub-bands facilitates the bitrate reduction, due to the fact that the human ear perceives the audio information in thespectral domain with a resolution corresponding to the critical bands of the ear, or evenlower. These critical bands have a width of about 100 Hz in the low-frequency region,which is below 500 Hz, and a width of about 20% of the centre frequency at higherfrequencies.
The requirement of having a good spectral resolution is unfortunately contra-dictory to the necessity of keeping the transient impulse response, the so-called pre-and post-echo, within certain limits in terms of temporal position and amplitudecompared to the attack of a percussive sound. Knowledge of the temporal maskingbehaviour [Fastl, 1977] gives an indication of the necessary temporal position andamplitude of the pre-echo generated by a time/frequency mapping in such a waythat this pre-echo, which normally is much more critical compared to the post-echo,
98 Digital Audio Broadcasting
![Page 129: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/129.jpg)
is masked by the original attack. In association with the dual synthesis filterbanklocated in the decoder, this filter technique provides a global transfer functionoptimised in terms of perfect impulse response perception.
3.2.2.4 Scale Factors
The sub-band samples are represented by a combination of scale factor and actual samplevalue. The scale factor is a coarse representation of the amplitude of either one individualsample or a group of samples. This approach allows for a higher reduction of the bit ratethan to code each individual sample.
The calculation of the scale factor for each sub-band is performed for a block of12 sub-band samples. The maximum of the absolute value of these 12 samples isdetermined and quantised with a word length of 6 bits, covering an overall dynamicrange of 120 dB per sub-band with a resolution of 2 dB per scale factor class. InAudio Layer I, a scale factor is transmitted for each block and each sub-band,which has no zero-bit allocation.
Audio Layer II uses additional coding to reduce the transmission rate for the scalefactors. Owing to the fact that in Layer II a frame corresponds to 36 sub-band samples,that is three times the length of a Layer I frame, three scale factors have to be transmittedin principle. To reduce the bit rate for the scale factors, a coding strategy which exploitsthe temporal masking effects of the ear has been studied. Three successive scale factors ofeach sub-band of one frame are considered together and classified into certain scalefactor patterns. Depending on the pattern, one, two or three scale factors are transmittedtogether with additional scale factor select information consisting of 2 bits per sub-band.If there are only small deviations from one scale factor to the next, only the bigger one hasto be transmitted. This occurs relatively often for stationary tonal sounds. If attacks ofpercussive sounds have to be coded, two or all three scale factors have to be transmitted,depending on the rising and falling edge of the attack.
This additional coding technique allows on average a factor of 2 in the reduction of thebit rate for the scale factors compared with Layer I.
3.2.2.5 Bit Allocation
Before the adjustment to a fixed bit rate, the number of bits that are available for codingthe samples must be determined. This number depends on the number of bits required forscale factors, scale factor select information, bit allocation information, and ancillarydata.
The bit allocation procedure is determined by minimising the total noise-to-mask ratioover every sub-band and the whole frame. This procedure is an iterative process where, ineach iteration step, the number of quantising levels of the sub-band that has the greatestbenefit is increased with the constraint that the number of bits used does not exceed thenumber of bits available for that frame. Layer II uses only 4 bits for coding of the bitallocation information for the lowest, and only 2 bits for the highest, sub-bands per audioframe.
Audio Services and Applications 99
![Page 130: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/130.jpg)
3.2.2.6 Sub-band Samples
First, each of the 12 sub-band samples of one block is normalised by dividing its value bythe scale factor. The result is quantised according to the number of bits spent by the bitallocation block. Only odd numbers of quantisation levels are possible, allowing an exactrepresentation of a digital zero. Layer I uses 14 different quantisation classes, containing2n – 1 steps, with 2<=n<=15 different quantisation levels. This is the same for all sub-bands. Additionally, no quantisation at all can be used, if no bits are allocated to a sub-band.
In Layer II, the number of different quantisation levels depends on the sub-bandnumber, but the range of the quantisation levels always covers a range of 3 to 65535with the additional possibility of no quantisation at all. Samples of sub-bands in the low-frequency region can be quantised with 15, in the mid frequency range with seven, and inthe high-frequency range only with three different quantisation levels. The classes maycontain 3, 5, 7, 9, 15, 63, . . . , 65535 quantisation levels. Since 3, 5 and 9 quantisationlevels do not allow an efficient use of a codeword, consisting only of 2, 3 or 4 bits, threesuccessive sub-band samples are grouped together into a ‘granule’. Then the granule iscoded with one codeword. The coding gain by using the grouping is up to 37.5%. Sincemany sub-bands, especially in the high-frequency region, are typically quantised withonly 3, 5, 7 and 9 quantisation levels, the reduction factor of the length of the code wordsis considerable.
3.2.2.7 Audio Layer II Bit-stream Structure
The bit-stream of Audio Layer II was constructed in such a way that a decoder of bothlow complexity and low decoding delay can be used, and that the encoded audio signalcontains many entry points with short and constant time intervals. The encoded digitalrepresentation of an efficient coding algorithm specially suited for storage applicationmust allowmultiple entry points in the encoded data stream to record, play and edit shortaudio sequences and to define the editing positions precisely. For broadcasting this isimportant to allow fast switching between different audio programmes.
To enable a simple implementation of the decoder, the frame between those entrypoints must contain all the information that is necessary for decoding the bit-stream. Owing to the different applications, such a frame has to carry in additionall the information necessary for allowing a large coding range with many differentparameters. In broadcasting, frequent entry points in the bit-stream are needed toallow for an easy block concealment of consecutive erroneous samples impaired byburst errors.
The format of the encoded audio bit-stream for Layer II is shown in Figure 3.4.Short, autonomous audio frames corresponding to 1152 PCM samples characterisethe structure of the bit-stream. Each audio frame starts with a header, followed bythe bit allocation information, scale factor and the quantised and coded sub-bandsamples. At the end of each audio frame is the so-called ancillary data field ofvariable length that can be specified for certain applications. Each frame can beaccessed and decoded on its own. With 48 kHz sampling frequency, the frameduration is 24 ms for Layer II.
100 Digital Audio Broadcasting
![Page 131: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/131.jpg)
3.2.3 MPEG-2/4 HE AAC
The original DAB system based around MPEG-1Audio Layer II coding had limitationswith regards bit-rate and quality, as would any audio coding scheme. In the years sincethe original Eureka 147 DAB system was designed, both audio coding algorithms haveimproved and processing power available to chip-set manufacturers has increased. Theadvanced broadcasting system DAB+ (see also section 3.4.2) aims to exploit this byimplementing a newer audio coding scheme. The audio coder chosen was a particularversion of High Efficiency Advanced Audio Coding version 2 (or HE AAC v2 for short).DRM (Digital RadioMondale) already uses HE AAC v2 for its coding scheme, so it wasa proven technology in a bandwidth-limited broadcast application.
The AAC (Advanced Audio Coding) algorithm comes in many varieties dependingupon its particular application. A summary of some of these different versions is listedbelow:
• MPEG-2 AAC – the original standard coder;• MPEG-4 AAC-LC – low complexity version;• MPEG-4 HE AAC – high efficiency version of AAC-LC with SBR (Spectral Band
Replication);• MPEG-4 HE AAC v2 – as HE AAC but with PS (Parametric Stereo coding) included.
MPEG-4 HE AAC v2 is a superset of the AAC-LC core codec. This superset structurepermits to use plain AAC for high bit rates, AAC and SBR (HE AAC) for medium bitrates or AAC, SBR and PS (HE AAC v2) for low bit rates.
DAB+ uses HE AAC v2 with the following key properties:
1. Spectral band replication (SBR).2. Parametric stereo (PS).3. 960-point transform.
These properties will be described later, but they are all aimed to provide a high audioquality at a lower bit-rate than was possible with MPEG-1 Audio Layer II.
SCFSICRC
Bitallocation Scale factors
2 Bit 6 Bit
16Bit 00
01
10
11
Header Ancillary data
32 BitSystemInform-ation
LowSub-bands
4 Bit
MidSub-bands
3 Bit
HighSub-bands
2 Bit
Ancillary datafield: lengthnot specified
12 Granules [Gr] of 3 Sub-bandsamples each
(3 Sub-band samples correspondto 96 PCM samples)
Gr11Gr0
Sub-band samples
Figure 3.4 Audio frame structure of MPEG-1 Audio Layer II encoded bit stream
Audio Services and Applications 101
![Page 132: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/132.jpg)
3.2.3.1 Overall View
HE AAC v2 consists of three main blocks: the core AAC coder, the SBR block andthe PS block. The core AAC coder performs the conventional transform audiocoding, generating a set of parameters for each audio frame based on the psycho-acoustically weighted properties of the audio signal. However as the bit-rates usedare relatively low, the bandwidth of the audio signal analysed is restricted to ensureartefact-free reproduction. To overcome this bandwidth restriction, the SBR partcomes into play. SBR synthesizes the missing higher frequencies by analysing boththe full-band original audio signal and the band-limited coded signal. The amountof data required to synthesize these high frequencies is much less than for the coreAAC coder. Therefore SBR allows full bandwidth audio to be coded, but at a loweroverall bit-rate. Further bit-rate saving can be made by exploiting redundancy inthe stereo aspect of the audio. Instead of coding the two channels (left and right)explicitly, the audio can be coded as a mono signal, but with extra stereo informa-tion to recreate a close approximation to the original stereo image. The PS partprovides this function, giving yet further savings of bit-rate.
3.2.3.2 AAC Core Encoder
To give an impression of the complexity of the AAC algorithm, the standards documentISO/IEC [13818-7] is about 150 pages long with numerous tables, diagrams and pseudo-code. Therefore to describe every single aspect of the AAC algorithm would not bepossible. There are other publications available [Bosi, 1997] [Wolters, 2003], which arerecommended as they provide a more detailed guide for this issue. The emphasis of thefollowing sections is to explain the key points of the algorithm in a clear and simple way.
Figure 3.5 is giving an overall picture of the various building blocks for the AACencoder.
3.2.3.3 The Filterbank
AAC is essentially a transform coder, where the time-domain audio signal is transformedinto a different domain that is more conducive to data reduction. Whereas MPEG-1Audio Layer II used a relatively coarse 32-band filterbank, AAC improves on this byusing a MDCT (modified discrete cosine transform) which produces a time-frequencyrepresentation of the audio at a far finer frequency resolution.
The size of the MDCT is not fixed, but can be one of two sizes. In the standardAAC coder these two sizes are 2048 and 256, but for the DAB+ implementationwith a shorter window size, this has been changed to 1920 and 240. The reason forhaving two different window sizes is to give the option of either good frequencyresolution (large transform) or good time resolution (small transform). The choiceof which transform is dependent upon the nature of the audio signal. Where theaudio is in a reasonably steady-state (e.g. sustained musical notes) then the largetransform is preferred. When the audio is changing drastically with transitions (e.g.hand-clap) then a short transform is more suitable.
102 Digital Audio Broadcasting
![Page 133: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/133.jpg)
3.2.3.4 Windowing
Before the audio samples are transformed by the MDCT they must be windowed.Windowing can affect the frequency selectivity and rejection of the transformed signal.In the same sense that the nature of the audio can decide whether to use a short or longtransform, it can also determine the best shape of window to use. Two shapes of windoware used: the sine window and the Kaiser-Bessel derived (KBD) window. The KBDwindow is better at separating spectral components when they are more than 220 Hzapart and gives good rejection beyond this. The sine window gives more poor rejection,but is better separating spectral components closer than 140 Hz to each other.
With two shapes of windows and two sizes of MDCT it follows that four differentwindows are possible. However windows in successive frames (or in the case of the short
Figure 3.5 AAC core encoder block diagram
Audio Services and Applications 103
![Page 134: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/134.jpg)
windows, sub-frames) must overlap-add to produce a constant unity value. If a short sinewindow is followed by a long KDB window, then the overlap of the two windows wouldnot result in unity. Therefore windows are broken into three chunks: start, middle and stopchunk. The start chunk of the current windowmust overlap and add to give unity with thestop chunk of the previous window. The middle chunk must just sit at unity. Therefore along window may start off with a short sine window start chunk, then have the unitymiddle chunk and then have a long KBD stop chunk. Short windows have no middlechunks, nor do long windows that have long windows preceding and following them.
3.2.3.5 Temporal Noise Shaping
The temporal noise shaping (TNS) filter is an optional part of the encoder. If it is used, itsets a flag in the bit-stream so the decoder is ready to use it.
A typical artefact of audio coders is pre-echo. This is where an impulse or transitiongets smeared out, often over a frame or sub-frame, so that energy is introduced before theactual sound starts. With spectral psychoacoustic masking, the magnitude spectrum of aframe containing a transient will effectively remove the information of the transient’soccurrence. Therefore a masking curve when translated back into the time domain willallow quantisation noise that is audible before the transient occurs.
TNS filtering is a technique that gets around this problem, and significantly improvesthe audio coding quality. TheMDCT coefficients are passed through a predictor, and theresidual is output and then passed onto the subsequent blocks of the encoder (this is whythe TNS must be flagged as the MDCT coefficients are no longer absolute values forquantisation). Open-loop or forward predictive coding applied to spectral values overfrequency results in the quantisation noise being adapted to the temporal (i.e. timedomain) shape of the audio signal. This effectively temporally masks the noise.
TNS filtering can be applied to parts of the spectrum, not just the whole spectrum, andthe order of prediction filter can be varied up to a maximum of 20. The residual, filterorder, frequency range and number of filters used are all encoded and transmitted. Thedecoder essentially performs the inverse of this process to generate absolute MDCTvalues from the residual given all the information about the TNS filtering.
3.2.3.6 Stereo Processing
Coding a stereo signal offers more opportunities for coding gain than just by treating it astwo independent channels. Twomethods of so called joint stereo coding are used in AACwhich can be combined. The first method is mid/side (M/S) stereo coding (also known assum-difference) and the second method is intensity stereo coding. For each frame ofaudio it is possible to apply either method to different frequency bands, or even just codebands as independent channels.
M/S stereo coding transforms the stereo signal (L, R) into a sum and difference pair ofsignals. This technique is useful in controlling the coding noise ensuring it is imaged in amanner that keeps it masked.While there may be redundancy in the correlation of the leftand right channels, it is possible that stereo signals can require larger masking thresholdsdue to unmasking effects of phase shifted or uncorrelated sounds between the channels.M/S coding is designed to counter these issues.
104 Digital Audio Broadcasting
![Page 135: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/135.jpg)
Intensity stereo coding exploits, particularly at high frequencies, that spectral valuescan be shared across both channels, and just a magnitude weighting can be used. So it islike turning frequency bands into mono signals that are then panned towards the channelthat is appropriate.
These stereo coding techniques can help to reduce the bit-rate of stereo material, andcan also be used in multichannel coding where the channels are handled in their symme-trical pairs.
3.2.3.7 Scale Factors
It is very unlikely that all the MDCT coefficients will be values close to the maximumpossible for normal audio signals. Usually they will be considerably lower, and often thehigher frequency coefficients will be lowest of all. When small values are quantised theywill suffer from more quantisation noise than larger values; therefore by boosting thesmaller values, quantisation noise can be reduced.
The MDCT coefficients are broken down into either 49 frequency bands for the largetransform or 14 bands for the small transform, which are based on the human ear’scritical bands. At lower frequencies these bands are narrower and widen at higherfrequencies. The diagrams given in Figures 3.6 and 3.7 show how these bands arearranged. The X scale represents the MDCT coefficients and the height of each scale
00
48
1216
2024
2832
96
200 400 600 800 1000
20
40
60
80
100
Figure 3.6 Scale factor bands for the large transform
Audio Services and Applications 105
![Page 136: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/136.jpg)
factor band represents its width. For each of these 49 or 14 bands a scale factor value iscalculated, and this amplifies all the coefficients in that particular band. A single valueknown as the global gain is also generated, which represents the maximum scale factor ofthe whole frame, and is used to offset the scale factor values, which are encoded asdifferential values from the previous scale factors.
The method for calculating the scale factors is very much down to the implementationand is not specified by any standards. Usually they are calculated by using informationfrom the psychoacoustic model, the bit rate used and the likely bit requirement for thequantised coefficients and the scale factors themselves.
For short windows, where there are 8 groups of 128 coefficients, the values are groupedand interleaved to improve the coding efficiency of the scale factors and coefficients.
3.2.3.8 Quantisation and Huffman Coding
The quantisation stage is where the serious data reduction occurs. Here the spectral datais quantised in a manner that aims to minimize the perceptual coding artefacts. Thequantiser is driven by the psychoacoustic model that provides information to whichspectral bands require more bits than others. As with any audio coder, there is a limit tohowmany bits are available for encoding this spectral data (i.e. the bit-rate setting on theencoder). Therefore there is a likelihood, which increases as the bit-rate drops, thatinsufficient bits are available to satisfy the psychoacoustic model’s demands. Hence the
4
8
12
16
0
20 40 60 80 100 120
2
4
6
8
10
12
14
16
Figure 3.7 Scale factor bands for the small transform
106 Digital Audio Broadcasting
![Page 137: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/137.jpg)
quantising process must compromise in some way to do the best it can with the availablebits and minimise the quantisation noise, or some other metric.
The quantiser used is nonuniform, which has the advantage of in-built noiseshaping. As the human ear responds to levels in a nonlinear way, it follows that aquantiser should do so too. The relationship between MDCT coefficients and theirquantised indices is:
xq ¼ sign xð Þ � nintjxj
2s= 4� �" #3
4
� p
0BB@
1CCA
where x is a MDCT coefficient;xq is the quantised coefficient;s is the quantiser step-size;p is an offset value;
sign is the sign of of a value i:e �1 or 1ð Þ and nint is the nearest integer value:
The decision of what step-size to use for quantisation is based on minimising thequantisation noise and the available bits. As there are up to 49 bands to deal with,often an iterative process is used to do this. Each stage of iteration will calculate theoverall quantisation noise that will result for a given set of scale factors and step-sizes;then adjust them accordingly to minimise this. There are many different approaches totackling this, and certain assumptions and starting points can be made from the psy-choacoustic model and nature of the signal.
The quantised coefficients are then coded using Huffman coding. The coefficients aregrouped into either two or four values, and depending upon the maximum absolute valueof the coefficients one of 12 codebooks is used.
Huffman coding is an efficient method of data reduction for numerical data. Thecoding gain is achieved by the knowledge of the likelihood of each data value. Forexample, the original data is 6 bits in length and the value zero (‘000000’) occurs40% of the time, then representing 000000 (6 bits) as 0 (a 1 bit word) would make asignificant saving. A rarely occurring value (let’s say 33, or ‘100001’ for thisexample) might only occur 0.2% of the time, therefore it could be represented bya 10 bit word. While this value might be longer than its uncoded version, it is sounlikely to occur it does not significantly add to the overall bit-rate. ThereforeHuffman coding can losslessly reduce the data rate for the quantised values. It alsofollows that the design of the Huffman codes must be tailored to the probabilitydistribution of the quantiser values. As these distributions vary with differentwindow sizes and quantiser step-sizes, then different Huffman codebooks arerequired; hence the need for 12 different codebooks in the encoder.
3.2.4 Spectral Band Replication (SBR)
Traditionally perceptual waveform codecs limit the bandwidth of the audio spectrum tomaximise the quality of the perceptually more important lower frequencies. At lower bit-rates this cut-off frequency can result in dull sound audio, albeit one without significant
Audio Services and Applications 107
![Page 138: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/138.jpg)
coding artefacts. If these lost higher frequencies can be recreated in some way, then abrighter and more realistic sound may be possible.
Spectral band replication (SBR) for the ISO/IEC specification [TS 14496] (see also[Meltzer, 2002] and [Meltzer, 2006]) is a technique to synthesise the higher frequencies ofan audio signal. For example, if the core AAC coder limits the bandwidth of a 16 kHzbandwidth audio signal to 0 to 9 kHz, then SBR can be used to generate the frequencies inthe 9 to 16 kHz band. SBR only requires a relatively small number of bits to describethese higher frequencies as it utilises the high correlation of the signal in the lowerfrequencies with the higher frequencies.
In simple terms, the technique transposes the lower frequencies that would be coded bythe core codec into the higher frequency area, and then spectrally shapes these transposedfrequencies to match the original spectral envelope as shown in Figure 3.8. The informa-tion required to represent the spectral envelope, along with some other guiding para-meters can be more compactly coded than if it was treated as a conventional waveformcoding.
(a) (b)
(c) (d)
Figure 3.8 SBR audio spectra(a)Original audio spectrum(b)Low frequencies conventionally coded and the envelope of high frequencies
(c)Low frequencies transposed to the high frequency range(d)High frequencies shaped with original envelope
108 Digital Audio Broadcasting
![Page 139: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/139.jpg)
There is more to the technique than simple transposition and envelope shaping, as manyfactors need to be dealt with. Such issues as transients, uncorrelated high and lowfrequencies, noise-like signals and isolated high frequency sounds all require extraanalysis and guiding information. It is also important to maintain both good time andfrequency resolution to ensure the SBR signal sounds realistic and seamless with the coreaudio signal.
The crossover frequency chosen for the SBR depends upon the bit-rate used. The lowerthe bit-rate the lower the crossover frequency required. For example, at 20 kbps (AAC,stereo) the crossover maybe set at 4.5 kHz, with the SBR dealing with up to 15.4 kHz.Whereas at 48 kbps, the crossover could be set at 8.3 kHz, with the SBR making the restup to 16.9 kHz. If youwere to use anAAC codec without SBR at 20 kbps, youmay set thecut-off at 8 kHz.With SBR at 20 kbps, the SBR part may take as little as 1 kbps, then youare coding the 0 to 4.5 kHz range with 19 kbps with the AAC core; therefore the quality ofthe 0 to 4.5 kHz signal would be greater than the 0 to 8 kHz coded signal (i.e. more bitsper kHz). The SBR part will then generate a higher bandwidth signal, producing a lessdull sound than the nonSBR coded audio.
This is why SBR can produce higher quality audio at lower bit-rates than thecore codec alone. However, at higher bit-rates the advantages of SBR wear off, andit is preferable to use the core codec to deal with the full audio bandwidth. This isbecause SBR cannot reproduce audio signals as accurately as the core codec if thecore codec is given sufficient bits. For AAC with stereo audio, the bit-rate whereSBR becomes unnecessary is around the 96 to 128 kbps mark. A good implementa-tion of the HE AAC (i.e. AAC with SBR) algorithm should automatically deal withthis crossover.
Another feature ofHEAAC is that nonSBR versions of AAC decoders can still decodethe audio, with the downside that the higher frequencies dealt with by SBR will bemissing. Dull but clear sounding audio is better than no audio at all!
As SBR removes the need of the AAC core codec to deal with higher frequencies, itbecomes possible for the core codec to operate at a lower sampling frequency. This canallow the core codec to reproduce better quality audio as improved frequency resolutionis available to it. For example if the audio source is sampled at 48 kHz, then the core AACencoder can operate at 24 kHz sampling while, SBR runs at the original 48 kHz. A simple2:1 down sampler is used in the encoder, and a 2:1 up sampler in the decoder, along with amixer to generate a decoded 48 kHz sampled signal.
The SBR encoder does not encode the audio on the raw time domain signal, buttransforms it using a quadrature mirror filter (QMF) into 64 frequency bands beforecarrying out the SBR analysis as shown in Figure 3.9. It follows that in the decoder, theAAC decoder’s output is fed to a 32-bandQMF analysis filter to be combined with a SBR32-band signal, before passing through a QMF synthesis filter as shown in Figure 3.10.
An AAC coder with SBR is also known as HE AAC v1.
3.2.5 Parametric Stereo Coding (PS)
Coding the left and right channels of a stereo signal separately produces the best imaging,but is only feasible at high bit-rates if the audio quality is not to be compromised. Many
Audio Services and Applications 109
![Page 140: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/140.jpg)
audio codecs look at both channels to code them together with various techniques, whichrely on the similarity between the channels to reduce the bit-rate requirement. BothMPEG 1/2-Audio Layer II andAAC coding has a stereomode known as intensity stereo,which is an efficient method of coding stereo signals to maximise the quality of the coresignal at the expense of the stereo image, without dropping down to a mono mix.
As most stereo audio signals have a high correlation between the left and rightchannels, there is a large amount of redundancy to exploit. By mixing left and rightchannels into a mono signal and transmitting a helper signal to allow this mono signal tobe spread back out into stereo at the decoder, we have a very efficient method of encodinga stereo signal. Parametric stereo (PS) [Meltzer, 2006] is a technique that generates ahelper signal from the original stereo audio, and transmits that alongside the mixed-downmono audio. The bit-rate requirement of the PS data is very small compared to thatof the audio data itself, giving significant bit-rate reductions over separately coded leftand right channels.
The parameters used by PS that can be derived from a stereo signal are:
• Inter-channel Intensity Difference (IID) – this is the intensity or magnitude differencebetween the channels. A great difference in intensity represents a hard panning of thesignal towards one channel.
Figure 3.9 AAC with SBR encoder block diagram
Figure 3.10 AAC with SBR decoder block diagram
110 Digital Audio Broadcasting
![Page 141: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/141.jpg)
• Inter-channel Phase Difference (IPD) – this is the phase difference between thechannels. With many recordings sounds reach one microphone before another(much like our ears), therefore a phase or time difference will occur. Recreating thisdifference maintains the localisation of the sound.
• Inter-channel Cross Correlation (ICC) – this is the correlation between the channels.A high correlation means the channels are similar, therefore IID or IPD are likely towork well. If this value is low then the channels are likely to be dissimilar and IID andIPD will be less effective.
As with SBR, PS is a helper to a core coder. Therefore if a decoder cannot decode PSdata, the decoded audio will simply be mono. Also, the PS algorithm (which also includesa stereo tomono downmixer) uses the sameQMFdomain signal as SBR, so can be placedbefore the SBR encoder. In the decoder the PS decoder generates a stereo signal in theQMF domain that can be turned back into an audio signal with a 64-band QMFsynthesis filterbank.
The diagrams in Figures 3.11 and 3.12 show how an encoder and decoder with bothSBR and PS are arranged. AnAAC coder with SBR and PS is also known as HEAAC v2.
Figure 3.11 HE AAC v2 encoder block diagram
Figure 3.12 HE AAC v2 decoder block diagram
Audio Services and Applications 111
![Page 142: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/142.jpg)
3.2.6 Audio Decoding
3.2.6.1 Audio Layer II Decoding
The block diagram of the decoder is shown in Figure 3.13. First of all, the headerinformation, CRC check, the side information (i.e. the bit allocation information withscale factors), and 12 successive samples of each sub-band signal are extracted from theISO/MPEG Audio Layer II bit stream.
The reconstruction process to obtain PCM audio is again characterised by filling up thedata format of the sub-band samples regarding the scale factor and bit allocation for eachsub-band and frame. The synthesis filterbank reconstructs the complete broadband audiosignal with a bandwidth of up to 24 kHz. The decoding process needs significantly lesscomputational power than the encoding process. The relation for Layer II is about 1/3.Because of the low computational power needed and the straightforward structure of thealgorithm, Audio Layer II can be easily implemented in special VLSI chips.
3.2.6.2 HE AAC v2 Decoding
The decoding process for HE AAC v2 consists of the AAC core decoder, SBR decoderand PS decoder. The block diagram for the three components was shown in Figure 3.12.The SBR and PS decoders are described in sections 3.2.4 and 3.2.5 respectively. The AACcore decoder is essentially the reverse of the encoder.
Figure 3.14 shows the block diagram of the AAC core decoder. The incoming bit-stream is converted into the data for each of the parameters, so the quantised coefficients,scale factors and block control data are all recovered. The scale factors and quantisedcoefficients are recombined to produce coefficients ready for the IMDCT. The IMDCTthen converts the frequency domain signal into the time domain signal, which is overlap-added according to the windowing sizes chosen at that instant.
Left Channel
Right Channel
Demulti-plexing
andError
Check
Requantisationof Sub-band
Samples
InverseFilterbank
32 Sub-bands
Programme-associatedData (PAD)
Decodingof
side info
DABAudioFrame
MPEG-1Layer II
Bit stream32… 384
kbps
Figure 3.13 Block diagram of the MPEG-1 Audio Layer II decode
112 Digital Audio Broadcasting
![Page 143: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/143.jpg)
As with most audio codecs the decoding process is far less complex than the encodingprocess. It is also standardised completely, so all implementations should produceidentical outputs, unlike the encoder.
3.3 Characteristics of DAB Audio Coding
The EU147DAB source coding system permits a digital audio broadcast receiver to use astandard MPEG-1 and MPEG-2 Audio Layer II decoder. Besides the emission of thedigital audio broadcast signal, the MPEG Audio Layer II coding technique and itsencoded audio bit-stream can be used in a number of other applications, includingcontribution between broadcast studios, primary and secondary distribution, andnews/sports reporting links. These different applications require a flexible coding schemeoffering a wide range of parameters, in particular concerning the bit rates, audio modes(i.e. mono, stereo and multichannel representation), protection level of the coded
Figure 3.14 AAC core decoder block diagram
Audio Services and Applications 113
![Page 144: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/144.jpg)
bit-stream and the possibility to carry Programme-associated Data (PAD), which enablecompletely new applications.
More detailed information can be found in [Stoll, 1995] or [AES, 1996].
3.3.1 Audio Modes
The audio coding system, used in Eureka 147 DAB, supports the following modes:
• Mono (one-channel) mode.• Stereo (two-channel) mode.• Dual-channel mode. In this mode, the two audio channels can be either bilingual, or
two mono channels, but with only one header. At the decoder a choice is made onwhich of the two programmes should be decoded.
• Joint stereo mode. In the Joint Stereo mode, the encoder exploits the redundancy andirrelevancy of stereo signals for further data reduction. The method used for JointStereo in Audio Layer II is ‘intensity stereo coding’. This technique still preserves thespectral envelope of the left and right channel of a stereo signal, but transmits only thesum signal of the sub-band samples of the left and right channel in the high audiofrequency region [Chambers, 1992].
• Low sampling frequency coding with fS 1/4 24 kHz.• Provisions are made in the Eureka 147 DAB standard [EN 300401] for the inclusion of
MPEG-2 Audio Layer II backwards-compatible Surround Sound coding.
3.3.2 Sampling Rate
The audio coding algorithm of DAB allows two sampling rates: 48 kHz and 24 kHz.The higher sampling rate can be chosen to have full audio bandwidth of 20 kHz for thetransmitted signal and to allow for a direct broadcasting of studio signals without theneed for sampling-rate conversion. The audio quality of a PCM signal improves withincreasing resolution of the input signal. Thus, the MPEG Audio Layer II standard canhandle a resolution of the input signal up to 22 bits/sample.
The lower bit rate can be chosen to deliver a high quality, in particular for speechsignals at very low bit rates, that is at bit rate of 64 kbps per channel. However, this doesnot mean that a new sampling frequency will be introduced outside of the DAB system.Instead a down-sampling filter from 48 kHz to 24 kHz in the audio encoder and an up-sampling filter from 24 kHz to 48 kHz in the decoder are used.
With DABþ, the sampling rate options are greater, with 48, 32, 24 and 16 kHz allpossible with the HEAAC v2 coding algorithm. The AAC core encoder runs at either 48/32 kHz (no SBR used) or at 24/16 kHz (with SBR). The 24 kHz and 16 kHz samplingrates are the half-sample rates for the AAC core, but unlike the 24 kHz sampling rate withLayer II that is band-limited to 12 kHz, the SBR part of HEAACprovides the band-limitof the full sample rate at these half sampling rates.
The 32 kHz and 16 kHz sampling rates may be better choices at very low bit-rateswhere the programmematerial is not demanding for encoding, such as speech.More halfsampling rate features are described in section 3.7.2.
114 Digital Audio Broadcasting
![Page 145: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/145.jpg)
Note: In contrast to other broadcasting systems (e.g. ADR) a sampling frequency of44.1 kHz is not applicable, which means a source taken from a CD has to be sample-rateconverted.
3.3.3 Frame Structure
TheDAB audio frame is based on theMPEGAudio Layer II framewhich includes all themain and side information which is necessary for the decoder to produce an audio signalat its output again. Additionally, each DAB audio frame contains a number of bytes thatmay be used to carry the PAD, that is the information which is intimately related to theaudio programme. This structure is depicted in Figure 3.15. The PAD field contains2 bytes of Fixed PAD (F-PAD), and an optional extension called the extended PAD(X-PAD). Functions available for the PAD include Dynamic Range Control (DRC),Music/speech indication (M/S), programme-related text and additional error protection.The PAD features are explained in section 3.5.
3.3.4 Bit Rates
Depending on the type of programme, the number of programmes within the DABmultiplex and the protection level, different bit rates for Audio Layer II lie in the rangeof 32 to 192 kbps in single channel mode can be selected at the audio encoder. The choiceof the bit rate is not fully independent of the audio mode. Depending on the bit rate, theaudio modes given in Table 3.3 can be used. Any combination of these options may beused within the DAB multiplex [Chambers, 1992]. For the half-sampling-rate coding of24 kHz, 14 different bit rates in the range of 8 to 160 kbps can be chosen, irrespective ofthe selected audio mode. For the multichannel extension, Table 3.3 is valid for the base
BitAllocation
Scale Factors Sub-bandF-
PAD
F-PAD
byteL-1
byteL
Audio Data
fixed size
SCFCRC
SCF-CRC
HEADER
CR
C
STUFFSCFSI
variable size
better protected part
4 bytes
X-PAD
Samples X-PAD
Figure 3.15 Structure of the DAB audio frame including Fixed and Extended Programme-associated Data (F-PAD and X-PAD) and Scale Factor CRC (SCF-CRC)
Audio Services and Applications 115
![Page 146: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/146.jpg)
bit-stream only. The details of the lower sample rates and the multichannel extension areexplained below.
The wide range of bit rates allows for applications that require a low bit rate and highaudio quality; for example, if only one coding process has to be considered and cascadingcan be avoided. It also allows for applications where higher data rates up to about180 kbps per channel could be desirable if either cascading or post-processing has to betaken into account. Experiments carried out by the ITU-R [AES, 1996] have shown that acoding process can be repeated nine times with MPEG-1 Layer II without any serioussubjective degradation, if the bit rate is high enough, that is 180 kbps per channel. If thebit rate is only 120 kbps, however, no more than three coding processes should occur.
The bit rates available for both DAB and DAB+ MPEG audio Layer II coding arevery extensive and beyond what is sensible for use as tolerable quality and economy.A sub-channel will have a size assigned to it, but not only does it have to accommodatethe bits for the audio coding, but it must also carry the PAD bits. Therefore the bit ratefor audio in the sub-channel will be less than the indicated value. For example, at 80 kbpsthe actual bit rate available for audio may only be around 72 kbps (the exact figuredepends upon PAD size and sampling rate). Therefore the quality of the audio is margin-ally lower than would be expected for the indicated bit-rate. This can become significantat bit-rates that are at the bottom end of the quality range of the audio coding algorithm,where the quality begins to fall away sharply.
3.4 DAB+ Coding Schemes
3.4.1 Is Audio Layer II Still Up-to-date for DAB?
The MPEG-1 Audio Layer II coding system was developed and intensively tested in theearly 1990s, and standardised for use with the DAB system in 1993. Even the last revisionof the DAB standard [EN 300401] is based on MPEG-2 Layer II, which now includeslower sampling rates.
In the time after, several different audio coding systems were exploited, especially foruse with very low bit-rates (between 8 kbps and 64 kbps). They are in particular aimed atInternet-streaming applications and related services. For example, this is the worldwideMP3 coding scheme (based on MPEG-1 Audio Layer III), and the MPEG-2/4 AAC(Advanced Audio Coding) system [IS 13818-7]. In principle, at lower bit-rates the AACcodec can provide audio quality better thanMPEG-1 Layer II, but it is not compatible toLayer II at all. Results from different tests [BPN 029] indicate, that the quality of Layer IIat 192 kbps can be reached with AAC already at 128 kbps, sometimes also at 96 kbps.That would mean a significantly higher spectrum efficiency if used for DAB.
Therefore, the question was raised, if Layer II is still the right choice for use with theDAB system. Investigations were made (for instance, see [Zieglmeier, 2000]) to comparethose coding systems with critical programme material, considering the requirement ofcascading of at least two codecs (which is typical for a broadcast chain).
Some of the last results of audio coding research were the so called Spectral BandReplication (SBR) technology [Meltzer, 2002], and the so called Parametric Stereo (PS)coding, see sections 3.2.4. and 3.2.5 respectively. That techniques can enhance theefficiency of existing perceptual audio codecs.
116 Digital Audio Broadcasting
![Page 147: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/147.jpg)
MPEG-4 AAC completed with SBR is called HE AAC. Apart from the new compo-nents of the DAB system family as DAB+ (see below) and DMB (see Chapter 9), HEAAC is also used for audio coding with the digital broadcasting system at frequenciesbelow 30 MHz, this is DRM (Digital Radio Mondiale, see section 1.6).
3.4.2 DAB+ Audio Coding
Considering the mentioned constraints an update to the original DAB system wasstandardised by WorldDMB, the so called DAB+ system.
DAB+ is based on the original DAB standard but uses a more efficient audio codec.Whereas DAB uses MPEG-1 Audio Layer II, DAB+ uses HE-AAC v2 (also known asAAC+). This allows equivalent or better subjective audio quality to be broadcast atlower bit rates. The increased efficiency offers benefits for Governments and Regulators(even better spectrum efficiency), broadcasters (lower costs per station) and consumers (awider choice of stations).
DAB+ is designed to provide the same functionality as the original DAB radio servicesincluding the following (e.g. to the same service on another DAB ensemble or its FMsimulcast), traffic announcements and PAD multimedia data (e.g. dynamic labels such astitle artist information or news headlines; complementary graphics and images etc.).
More benefits of DAB+ compared with the basic DAB system are listed insection 1.3.2.
The HE-AAC v2 audio codec is at the time the most efficient audio compressionscheme available and allows for up to three times as many services per multiplex as theoriginal DAB: A 40 kbps subchannel with HE-AAC v2 provides a similar audio quality(even slightly better in most cases) as MPEG Audio Layer II at 128 kbps.
3.4.2.1 Coding Technology of DAB+
HE-AAC v2 combines three technologies:
• The core AAC audio codec.• A bandwidth extension tool SBR (Spectral Band Replication), which enhances effi-
ciency by usingmost of the available bit rate for the lower frequencies (low band) of theaudio signal. The decoder generates the higher frequencies (high band) by analysingthe low band and side information provided by the encoder. This side informationneeds considerably less bit rate than would be required to encode the high band withthe core audio codec.
• Parametric stereo (PS): a mono down-mix and side information is encoded asopposed to a conventional stereo signal. The decoder reconstructs the stereosignal from the mono signal using the side information. HE-AAC v2 is a supersetof the AAC core codec. This superset structure permits plain AAC to be used forhigh bit rates, AAC and SBR (HE-AAC) for medium bit rates or AAC, SBR andPS (HE-AAC v2) for low bit rates. Therefore HE-AAC v2 provides the highestlevel of flexibility for the broadcaster. A detailed description of HE-AAC v2 isavailable in section 3.2.3.
Audio Services and Applications 117
![Page 148: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/148.jpg)
HE-AAC v2 provides the same perceived audio quality at about one third of thesubchannel bit rate needed by MPEG Audio Layer II. The same audio coding is alsoused in DRM (see section 1.6.) and DMB (see Chapter 9) e.g. for television audio.Devices, which also include DMB or DRM capabilities can benefit from the fact thatthe audio coding for this range of technologies is essentially the same.
3.4.2.2 Bit Rates with DAB+
Whereas DAB with Audio Layer II offered two sampling rates, 24 and 48 kHz; withDAB+ and HE AAC v2, there are now four possible sampling rates: 16, 24, 32 and48 kHz. The half sample rates for DAB+ are therefore 16 and 24 kHz.
The provided sampling rates are used by the AAC core coder. If SBR is not used, thenthe AAC core uses 32 or 48 kHz. If SBR is used, then the AAC core runs at half thesesampling rates (i.e., at 16/24 kHz), and the SBR algorithm deals with the full sampledversion of the audio. For example a 48 kHz sampled stream of audio can be encoded byDAB+ using SBR at 40 kbps. In this case the actual sampling rate used by the AAC corewill be 24 kHz (half of 48 kHz as SBR is used). So the core codec will code 0 to 12 kHz ofthe audio and SBR will deal with the 12 to 24 kHz region. The DAB+ receiver will usethe 24 kHz sampling rate for the AAC core, but as it has an SBR decoder, the decodedaudio will be sampled at 48 kHz with full audio bandwidth.
At higher bit-rates where SBR is not required, the full sampling rates (32 and 48 kHz)would be used. The 32 kHz sample rate (and 16 kHz half sample rate) allows moreflexibility with using lower bandwidth audio where quality can be optimised at lower bit-rates, or where the audio material is more suited to it (speech programmes would benefitat these sampling rates). It is worth remembering the audio in FM radio rolls off at15 kHz, which would be within a 32 kHz sampling rate.
The bit rates for DAB+ are shown in Table 3.1, where the actual bit rates available ateach of the possible sampling rates are listed [TS 102563].
Unlike Audio Layer II in DAB, DAB+with HE AAC v2 allows the full range of sub-channel bit-rates from 8 to 192 kbps at all the sampling rates. Naturally, some of thesecombinations would be completely irrelevant in terms of quality and coding efficiency.
It should also be noted, that there would be a significant difference in the processingtime delay between Audio Layer II (which needs approximately 70 ms) and AAC (takesabout 300 ms).
3.4.2.3 DAB+ Features
All the functionalities available for DAB with MPEG Audio Layer II services are alsovalid for DAB+:
• service following (e.g. to FM or other DAB ensembles);• traffic announcements;• PAD multimedia (dynamic labels such as title artist information or news headlines;• PAD dynamic control issues (DRC, M/S control, see below);• still images (such as weather charts and other multimedia content);• service language and programme type information (e.g. Classical music, Rock music,
Sports) etc.
118 Digital Audio Broadcasting
![Page 149: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/149.jpg)
MPEGAudio Layer II and HE-AAC v2 radio services can coexist in the same ensemble.However, legacy receivers might list HE-AAC v2 radio services even though they will notbe able to decode them.
Short ‘Zapping’ DelayAn important design criterion forDABþwas to provide a short ‘zapping’ delay. Both thetime it takes to switch from one radio service to another station on the same DABensemble as well as the time it takes to tune to a radio service on another DAB ensemblewas minimized.
Surround SoundCurrently all DAB radio services are mono or stereo. However, DAB+ also provides themeans to broadcast surround sound in a backwards compatible way. Using MPEGSurround (see section 3.6.4) it is possible to broadcast a stereo signal together with
Table 3.1 Bit-rates for DAB+
Sub-channel Sub-channel size Bit-rate available for audio [kbps]
index, s [kbps]AAC core sampling rate
16 kHz 24 kHz 32 kHz 48 kHz
1 8 6,733 6,533 6,267 5,8002 16 14,067 13,867 13,600 13,133
3 24 21,400 21,200 20,933 20,4674 32 28,733 28,533 28,267 27,8005 40 36,067 35,867 35,600 35,133
6 48 43,400 43,200 42,933 42,4677 56 50,733 50,533 50,267 49,8008 64 58,067 57,867 57,600 57,1339 72 65,400 65,200 64,933 64,467
10 80 72,733 72,533 72,267 71,80011 88 80,067 79,867 79,600 79,13312 96 87,400 87,200 86,933 86,467
13 104 94,733 94,533 94,267 93,80014 112 102,067 101,867 101,600 101,13315 120 109,400 109,200 108,933 108,467
16 128 116,733 116,533 116,267 115,80017 136 124,067 123,867 123,600 123,13318 144 131,400 131,200 130,933 130,46719 152 138,733 138,533 138,267 137,800
20 160 146,067 145,867 145,600 145,13321 168 153,400 153,200 152,933 152,46722 176 160,733 160,533 160,267 159,800
23 184 168,067 167,867 167,600 167,13324 192 175,400 175,200 174,933 174,467
Audio Services and Applications 119
![Page 150: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/150.jpg)
surround side information (e.g. 5 kbps for side information). Standard stereo radios willignore this side information and only decode the stereo signal.MPEGSurround receiverswill evaluate the side information and reproduce surround sound (e.g. in 5.1 or othermultichannel formats). So at a comparatively low additional bit rate, the broadcaster canincrease the audio experience on surround sound receivers, and still provide high qualitysound to all other radios.
Performance of DAB+ in Field TestsDuring the standardisation process, field tests were conducted in the UK and inAustralia. They gave a number of interesting results.
They showed that the geographical coverage area of radio services using HE-AAC v2is slightly larger than that for radio services using MPEG Audio Layer II. The multi-media information carried in PAD of an HE-AAC v2 radio service is much betterprotected against transmission errors than PAD data of a radio service using MPEGAudio Layer II.
The error behaviour of MPEG Audio Layer II is different to that of HE-AAC v2.Audio services using HE-AAC v2 performed about 2 to 3 dB better at the threshold ofaudibility. With MPEG Audio Layer II, the weaker the DAB signal gets, the moreaudible artefacts can be heard. HE-AAC v2 produces no audible artefacts, but whenthe signal gets too weak, an increased number of audio frames will be lost and this causesshort periods of silence (fade-out and fade-in). Compared to radio services using MPEGAudio Layer II, radio services using HE-AAC v2 will fail later (they can cope with aslightly lower DAB signal quality), but the margin from error free reception to loss ofreception is smaller.
3.5 Programme-associated Data
The DAB system not only provides a very high audio quality for the listener, but alsoincludes provision for many additional data services [BPN 007], [Riley, 1994]. Most ofthese data services are independent of the audio programme, but some of them are closelyrelated to the audio signal. The latter form is the so-called Programme-associated Data(PAD). A fixed and optionally a flexible number of bytes are provided to carry the PADin the DAB audio bit-stream, see Figure 3.15 in section 3.3.3. Additional capacity isprovided elsewhere in the DAB multiplex (or ‘ensemble multiplex’) to carry moreindependent data or additional information, such as text, still or moving pictures, seeChapters 4 and 5.
Examples of Fixed Programme-associated Data (F-PAD) include:
• Dynamic Range Control (DRC) information, which may be used in the receiver tocompress the dynamic range of the audio.
• Speech/music indication to allow for different audio processing of music and speech(e.g. independent volume control).
As these features are directly related to the audio programme signal, they are described indetail in the following. For more details on other programme-associated information
120 Digital Audio Broadcasting
![Page 151: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/151.jpg)
carried within the F-PAD or X-PAD (Extended Programme-associated Data), seeChapters 2, 4 and 5.
In reproduction of audio broadcast programmes there will often be the need to applydynamic range compression to some types of programme material because of listeners’requirements. Furthermore the satisfactory balancing of the loudness of different typesof programme, particularly music and speech, depends principally upon the listeners’requirements. In conventional broadcasting it has never been possible to satisfy differentindividual habits of listening.
3.5.1 Dynamic Range Control (DRC)
The DAB DRC feature enables broadcasters to transmit programmes with arelatively wide dynamic range, accompanied by a DRC signal which the listenermay use to effect unobtrusive compression of the programme dynamics, if required[Hoeg, 1994].
The dynamic range of an audio programme signal (sometimes termed the programmedynamic) is the range between the highest and the lowest useful programme signal level.The problems associated with programmes having a wide dynamic range, and withachieving a satisfactory loudness balance between different parts of the radio programme(such as speech or music), are well known from experience with VHF/FM broadcasting[Muller, 1970]. In many cases the source programme dynamic or the dynamic rangecommonly used by the broadcasters (approx. 40 dB) may be much larger than the usabledynamic range (the so-called reproduction dynamic) in noisy environments such as in amoving car. The reduction required in the dynamic range of the programmemay be 10 to30 dB (or more).
Taking into account the listening conditions and the requirements of the listener, theseproblems can only be solved at the receiver. For this to be feasible, additional informa-tion must be provided by the broadcaster concerning the gain adjustments, which may beneeded to reduce the dynamic range. Therefore, at the broadcaster’s premises a DRCsignal is generated at the studio side, which describes the audio gain to be applied in thereceiver, as a succession of values. This DRC signal is transmitted in a coded form (DRCdata=DRCD) together with the audio.
It is a requirement of the DAB specification [EN 300401] that the audio signal istransmitted with its original programme dynamic, without any pre-compression. TheDRCdata is incorporated in theDAB bit-stream as PAD. In the receiver, the regeneratedDRC signal may be used optionally to control the audio gain in order to match thedynamic range of the received audio programme to the requirements of the listener, or toimprove audibility in difficult conditions.
The user can choose any appropriate compression ratio between the anchors:
• No compression: the audio programme is reproduced with the dynamic range asdelivered by the broadcaster;
• Nominal compression: the audio programme is reproduced with an appropriate degreeof dynamic compression as adjusted by the broadcaster (normally the dynamic range iscompressed by about 1.3:1);
Audio Services and Applications 121
![Page 152: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/152.jpg)
•– Maximum compression: the audio programme can be reproduced with extremely strongcompression of the dynamic range (e.g. > 2.0:1). This makes sense for poor reproduc-tion conditions (e.g. in a car) and for special programme types only, because the soundquality is likely to be affected.
3.5.2 Music/Speech Control (M/S)
It is well known from any kind of radio programme transmission that there may bevery different requirements in the loudness balance between music and speechprogrammes, depending on the interests of the listener [Ilmonen, 1971]. A Music/Speech (M/S) control signal, which is also transmitted in the DAB bit-stream, nowenables the listener to balance the loudness of different types of programme accord-ing to taste.
There is the option to signal four states of the so-called M/S flag within the PAD:
00 programme content=Music
01 programme content=Speech
10 programme content=not signaled
11 reserved for future use (e.g. for a programme containing music and speech withartistically well-balanced levels, for instance a drama or musical).
This M/S flag information can be generated at the studio side automatically (e.g.derived from the corresponding channel fader at the mixing console). As an item ofprogramme-related data, the information is transported within the PAD, and may beused at the receiver to control the output signal level (volume) in a predeterminedmanner, probably in a level range of about 0 to –15 dB, to enhance either the music, orthe speech.
3.5.3 Transport Mechanism of DRC and M/S Data
Data traveling in the PAD channel is intimately related to the audio programme. It isassembled together with the coded audio in the same DAB frame, so the time relationestablished at the source is maintained throughout the complete DAB transmissionchain. Audio and PAD must not be subject to different transmission delays.Figure 3.16 shows a simplified block diagram of the DRC system for DAB, which isalso valid in principle for transmission of the M/S control flag.
The DRC signal is generated by a characteristic which is linear over most of thedynamic range, with an appropriate compression ratio. An overall range of gain varia-tion of about 15 dB is linearly coded in a 6-bit digital word, for each 24 ms frame of thebroadcast audio signal. The intention is to provide long-term compression of thedynamic range whilst preserving the impact of dramatic changes in the programmedynamics (e.g. that caused by a crescendo or subito fortissimo). Therefore the generatingalgorithms use specific sets of audio programme controlled time characteristics, whichare not the subject of any specification.
122 Digital Audio Broadcasting
![Page 153: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/153.jpg)
The DAB audio programme signal itself is transmitted without any dynamic compres-sion applied after the production/post-production stage. During the production of sometypes of programmes, compression may be applied for ‘artistic’ reasons. However,programme signals compressed at this stage are treated in the same way as uncompressedsignals by the DRC system. Because the DRC data is transmitted discontinuously inbursts at time intervals of one DAB frame (24 ms) it is necessary to have a look-aheadtime of one complete DAB frame in which to analyse the level of the signal, to avoidovershoots (i.e. brief periods in which the reproduced signal is excessively loud). Thismeans that a delay of at least 24 ms must be introduced into the signal path at the DRCDgenerator so that the incoming audio signal may be examined prior to generation of theDRC data. The DRC data for each DAB audio frame is conveyed in the L-byte of thePAD of the preceding DAB audio frame of the broadcast signal (see [EN 300401]). Thusthe DRC data arrives at the receiver immediately before the audio with which it isassociated, avoiding the need for further delays to be introduced by the receiver.
Some dynamic range control algorithms may require longer delays, in excess of 24 msand up to several seconds. These would be associated with the DRCD generator at thetransmitting end, and would not require any different implementation or treatment in thereceiver.
DRC is also defined for an AAC coding bit-stream and can so be used with DAB+.In contrast to MPEG Audio Layer II, here the Dynamic Range Control (DRC) datashall not be carried in F-PAD. If Dynamic Range Control is used, the DRC data shallbe encoded utilising AAC specific means: DRC data is stored in the data fielddynamic_range_info, which is contained in the so called extension payload – a syn-tactic element of AAC [TS 102563]. The reason is, not to use extra data capacity in thePAD field, but to transmit the DRC data directly within the audio stream.
3.5.4 The Receiving End
A common and simple receiver concept realises the necessary DRC functions. Thesefunctions do not depend upon the type of algorithm in the DRC signal generator used atthe transmitting end. The same options for listening to the uncompressed programme,
AudioSignal
Audio/un-compressed
+DRCD
DNEGNIVIECERTRANSMITTING END
DABReceiver
SourceDecoder
PAD-Inserter
Transmission
PADDemux
SourceEncoder
DRCDGenerator
GainControl
DRCDecoder
Figure 3.16 Block diagram of a DRC system for DAB
Audio Services and Applications 123
![Page 154: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/154.jpg)
the programme with the nominal degree of compression and the programme with agreater degree of compression are always available.
The DRC data is demultiplexed from the PAD area, and a linear interpolationregenerates a continuous signal to control the gain of the audio channel, in order tomatch the dynamic range of the received programme to the individual listener’s needs.The maximum gain change in the compression mode will be about 15 dB. If the errorprotection applied to the PAD fails, specifically defined limiting characteristics for therate of gain change will protect the compressed audio signal against severe impairments.
The conventional way for controlling the dynamic range is to use a simple multi-plication in the digital domain, or a VCA (or DCA) at the analogue end of the receiver torealise all necessary gain adjustments (DRC, manual or automatic volume control andother gain-related features such as the balancing of music and speech loudness).
Solutions fulfilling the DAB requirements for DRC data have been developed byseveral parties, see also [Hoeg, 1994]. These systems normally need a look-ahead time,typically from 24 ms up to 3 s. There are several configurations of DAB receiver equip-ment (see Chapter 8) which support DRC and M/S functionality.
Besides the DRC system with control data being transmitted as described in the DABstandard [EN 300401], self-contained compressors for use in receivers which are operat-ing without the need for transmitted control data have also been proposed. One of these[Theile, 1993] is based on scale factor weighting in the MPEG-1 Audio Layer II decoder.
3.6 Multichannel Audio with DAB
The use of discrete multichannel audio (3/2 or 5.1 format respectively) in the home isbecoming adoptedwith the introduction of the new storagemediumDVDand the adventof digital terrestrial television (DVB-T, see section 1.6).
One of the basic features of the MPEG-2 Audio standard [IS 13818] is the backwardcompatibility to MPEG-1 [IS 11172] coded mono, stereo or dual-channel audio pro-grammes. This means that an MPEG-1 audio decoder is able to decode correctly thebasic stereo information of a multichannel programme. The basic stereo information iskept in the left and right channels, which constitute an appropriate downmix of the audioinformation in all channels. This downmix is produced in the encoder automatically. Thebackward compatibility to two-channel stereo is a strong requirement for many serviceproviders who may wish to provide high-quality digital surround sound in the future asthere is already a wide range of MPEG-1 Audio Layer I and Audio Layer II decoderchips which support mono and stereo sound.
3.6.1 Characteristics of the MPEG-2 Multichannel Audio Coding System
A generic digital multichannel sound system applicable to television and sound broad-casting and storage, as well as to other non-broadcasting applications, should meetseveral basic requirements and provide a number of technical/operational features.Owing to the fact that during the next few years the normal stereo representation willstill play a dominant role for most of the consumer applications, two-channel compat-ibility is one of the basic requirements. Other important requirements are interoperability
124 Digital Audio Broadcasting
![Page 155: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/155.jpg)
between different media, downward compatibility with sound formats consisting of asmaller number of audio channels and therefore providing a reduced surround soundperformance. The intention is to provide for as wide a range of applications and facilitiesas possible, including multilingual services, clean dialogue and dynamic rangecompression.
MPEG-2 audio allows for a wide range of bit rates from 32 kbps up to 1066 kbps. Thiswide range can be realised by splitting the MPEG-2 audio frame into two parts:
1. The primary bit-stream which carries the MPEG-1 compatible stereo information ofup to 384 kbps.
2. The extension bit-stream which carries either the whole or a part of the MPEG-2specific information, that is the multichannel and multilingual information, which isnot relevant to an MPEG-1 audio decoder.
Figure 3.17 shows the ISO/IEC 13818-3 MPEG-2 Audio Layer II multichannel audioframe consisting of the MPEG-1 compatible part and the so called extension part.
The ‘variable length’ of the ancillary data field in the MPEG-1 compatible audioframe, or the MPEG-1 compatible part of the MPEG-2 frame, gives the possibility ofcarrying some multichannel extension information. However, for high-quality AudioLayer II coding the bit rate for the multichannel audio signal may exceed 384 kbps,requiring an extension part to be added to the MPEG-1 compatible part.
All the information about the compatible stereo signal has to be kept in the MPEG-1compatible part. In this case, the MPEG-2 audio frame consists of the MPEG-1 compa-tible and the (non-compatible) extension parts. The MPEG- 1 standard provides for amaximum of 448 kbps for Audio Layer I and 384 kbps for Layer II. The extension bit-streammust therefore provide such additional bit rate as may be necessary. If, in the caseof Layer II, a total of 384 kbps is selected, the extension bit-stream can be omitted.
Header
CRCMPEG-1 Audio Data
MPEG-1 Compatible Audio Frame
MC-CRC
MC-Header
MC-Audio Data Anc. Data
MPEG-2 Audio Frame
Header
CRCMPEG-1 Audio Data
MC-CRC
MC-Header
MC-Audio DataAnc. Data
MPEG-2 Audio Frame - MPEG-1 "Compatible Part"
Ext-CRCExt-Sync
Ext-MC-Audio Data
Ext-Anc. DataExt-Length
"Extension Part"
Anc. Data Pointer
Figure 3.17 MPEG-2 Audio Layer II multichannel audio frame, consisting of the MPEG-1compatible part and the extension part
Audio Services and Applications 125
![Page 156: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/156.jpg)
The MPEG-2 standard does not require the bit rate to be fixed, and in applicationssuch as ATM transmission, or storage applications such as DVD (Digital Video Disk) avariable bit rate may be used to advantage.
Serious quality evaluations [BPN 019], [Wustenhagen, 1998] have shown that abit rate of about 512 to 640 kbps will be sufficient to provide a reasonable audioquality for multichannel audio transmission using MPEG-2 Audio Layer IIcoding (non-coded transmission of five signals would need a net rate of5 � 768=3.840 kbps).
3.6.2 3/2-Multichannel Presentation Performance
3.6.2.1 The ITU-R Multichannel Audio Format
The universal multichannel audio format named 3/2 or 5.1 is based on the genericinternational standard given in ITU-R Recommendation [BS.775] and other relatedEBU documents [R96], [BPN021] and SMPTE [RP173] as well.
These formats can be used by DAB or other digital TV services such as DVB-T. TheDVD audio recording disc format additionally supports the 5.1 multichannel audiostandard.
ITU-R BS.775-1 defines the following source and reproduction signals/channels asFormat 3/2 which means three signals for the left, right, centre channels to the front, twosignals for left surround and right surround channels, and an optional low frequencyeffect (enhancement) signal, as designed below:
Code Signal/channel
L Left Front
R Right Front
C Centre
LS Left Surround
RS Right Surround
LFE Low Frequency Effect (optional)
As an option, because it is common in the film industry, the reference 3/2 format can besupplemented by an additional low-frequency effect (LFE) channel for signals intendedfor low-frequency effect speaker(s). This channel is used for special effects in motionpictures etc. It has a restricted bandwidth of 20 to 120 Hz and up to 10 dB higherreproduction level.
An important requirement for the new multichannel system is to provide back-ward compatibility to existing audio formats using a lower number of channels/signals. This leads to a hierarchy of compatible sound systems (see Table 3.2), frommono (1/0) via two-channel stereo (2/0) up to the new universal multichannel audiosystem (3/2).
126 Digital Audio Broadcasting
![Page 157: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/157.jpg)
In this hierarchy, up- and down-mixing of multichannel sound originated for broad-casting, cinema or recording is possible as well as programme exchange or broadcastingat different format levels. That means a receiver can reproduce a programme transmittedor recorded in the 3/2 format also in 2/0 at an appropriate quality, depending on technicaland other conditions on the reception side.
The increasing penetration of discrete multichannel audio systems into the consumermarket worldwide, means that broadcasters should not be left behind.
Multichannel sound reproduction was primarily developed for film sound and ismostly used for this medium and for DVD recordings now.
Otherwise, pure multichannel audio programmes can be transmitted by radio, as therevised coding scheme for DAB (Digital Audio Broadcasting) now allows the use ofMPEG-2 Layer 2 multichannel audio. Although there are some limitations for themaximum bandwidth (bit-rate) in a DAB ensemble multiplex (1.5 Mbps per block).Recent tests made by the EBU [BPN 019] have shown that a bit-rate between 512 and640 kbps is sufficient to provide a reasonable quality for a 5.1 multichannel audioprogramme.
The provision of multichannel audio by radio or TV can be an argument for the user toreplace their conventional reception devices with new receivers for DAB and/or DVB.
3.6.2.2 Low-frequency Effect Channel (LFE)
According to [BS.775], the 3/2-stereo sound format should provide an optional Low-frequency Effect (LFE) channel (sometimes also called Low-frequency Enhancement), inaddition to the full range main channels. The LFE is capable of carrying signals in thefrequency range 20 Hz to 120 Hz. The purpose of this channel is to enable listeners, whochoose to, to extend the low-frequency content of the audio programme in terms of bothlow frequencies and their level. From the producer’s perspective this may allow forsmaller headroom settings in the main audio channels. In practice, the LFE channel ismainly used with film sound tracks. The mentioned 3/2 format is commonly called‘5.1 format’, where ‘.1’ means the LFE channel.
Table 3.2 Hierarchy of compatible multichannel sound systems for broadcasting and recording(according to ITU-R [BS.775])
System Channels Code Application
Mono M 1/0 Radio/TV2-channel stereo L/R 2/0 Radio/TV, CD/MC recording2-channel+1 surround L/R/MS 2/1 (practically not used)
2-channel+2 surround L/R/LS/RS 2/2 (some special recordings on CD)3-channel stereo L/C/R 3/0 (practically not used)3-channel+1 surround L/C/R/MS 3/1 Matrixed surround (Dolby, etc.)
3-channel+2 surround L/C/R/LS/RS 3/2 Universal multichannel system forfilm, TV/radio, recording (DVD)
Audio Services and Applications 127
![Page 158: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/158.jpg)
3.6.3 Compatibility Aspects
3.6.3.1 Backward/forward Compatibility with MPEG-1
The multichannel audio decoder has to be backward/forward compatible with theexisting two-channel or monophonic sound format.
Backward compatibility means that the existing two-channel (low-price) decodershould decode the basic 2/0-stereo information from the multichannel bit-stream (seeFigure 3.18) correctly. This implies the provision of compatibility matrices[ten Kate, 1992] using adequate downmix coefficients to create the compatible stereosignals L0 and R0, shown in Figure 3.19. The inverse matrix to recover the fiveseparate audio channels in the MPEG-2 decoder is also shown in the same figure.
The basicmatrix equations used in the encoder to convert the five input signals L, R, C,LS and RS into the five transport channels T0, T1, T2, T3 and T4 are:
T0¼L0¼ a� Lð Þ þ b� a� Cð Þ þ g� a� LSð ÞT1¼R0¼ a� Rð Þ þ b� a� Cð Þ þ g� a� RSð ÞT2¼CW¼ a� b� C
T3¼LSW¼ a� g� LS
T4¼RSW¼ a� g� RS
T0 = L0 =L+xC+yLS
T1 = R0 = R+xC+yRS
T2 = C
T3 = LS
T4 = RS
L
R
LS
RS
C
LFE
Basic-StereoISO 11172–3
plusMC/Extension(C,LS,RS,LFE)
Lo´
Ro´
LFE´
L´
R´
C´
LS´
RS´
Mat
rix
Ste
reo
Dec
od
er
Dem
atri
x
Mu
ltic
han
nel
Dec
od
er
MC
- E
nco
der
MC = multichannel
Figure 3.18 Backward compatibility of MPEG-2 Audio with MPEG-1
128 Digital Audio Broadcasting
![Page 159: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/159.jpg)
Four varying matrix procedures with different coefficients �, � and � have been definedand can be chosen in the MPEG-2 multichannel encoder, dependent from the individualcharacter of the programme. Three of these procedures add the centre signal with 3 dBattenuation to the L and R signals. The surround signals LS and RS are added to the L,respectively R, signals with either 3 dB or 6 dB attenuation. The possibility of an overloadof the compatible stereo signals L0 and R0 is avoided by the attenuation factor which isused on the individual signals L, R, C, LS and RS prior to matrixing. One of theseprocedures provides compatibility with Dolby Surround decoding. Being a two-channelformat, compatibility can already be realised in MPEG-1. MPEG-2 allows such trans-missions to be extended to a full, discrete five-channel format.
The fourth procedure means that no downmix is included in the bit-stream, whichactually constitutes a Non-backwards Compatible (NBC) mode for the MPEG-2 multi-channel codec. AnMPEG-1 decoder will produce the L andR signals of themultichannelmix. In certain recording conditions this ‘matrix’ will provide the optimal stereo mix.
Forward compatibility means that a future multichannel decoder should be able todecode properly the basic 2/0-stereo bit-stream.
The compatibility is realised by exploiting the ancillary data field of theISO/IEC 11172-3 audio frame for the provision of additional channels (see Figure 3.17).
In its first realisation the DAB system [EN 300401] will not provide multichannelsound. Therefore the extension to digital surround sound has to be backward/ forwardcompatible with an MPEG-1 Audio decoder.
3.6.3.2 Compatibility with Matrix Surround
Matrix surround systems, such as Dolby ProLogic, have found wide acceptance inconsumers’ homes. Many movies and drama programmes are produced not only indiscrete multichannel but also in matrix surround for delivery on video tape andanalogue broadcast.
LS
L
C
R
RS
αxγ
α
αxβ
αxγ
1/(αxγ)
1/α
1/(αxβ)
1/α
1/(αxγ)
–
DematrixingMatrixing Transmission
α
LSw
Lo
Cw
Ro
RSw
++
+ +
–
–
–
LS
L
C
R
RS
Figure 3.19 Compatibility matrix (encoder) to create the compatible basic stereo signal, and the
inverse matrix (decoder) to re-establish the discrete five audio channels
Audio Services and Applications 129
![Page 160: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/160.jpg)
To broadcasters this legacy of matrix surround systems means that they should be ableto continue to broadcast matrix surround material with the digital system. The audiocoding system should be compatible with the matrix surround system.
The BBC conducted a study on the compatibility ofMPEGAudio Layer II and DolbyProLogic I (then the dominant matrix surround system) and found that, provided someprecautions are taken, the surround information is completely preserved [Meares, 1998].
3.6.4 MPEG Surround for HE AAC
In section 3.2.5 the technique of Parametric Stereo (PS) was described, where a down-mixed mono signal can be turned into a stereo signal with the use of a parametricdescription of the stereo features and a suitable synthesizer. MPEG Surround[Breebart 2005] is a system which takes this philosophy and extends it to surroundsound, or multichannel audio.
As with Parametric Stereo (PS), an MPEG Surround encoder will have the originalmultichannel signals to analyse, and will aim to reproduce them as realistically aspossible. Instead of transmitting six channels of audio (which would be the case for 5.1surround sound), a downmixed version of the original can be coded and transmitted,which may either be stereo or even mono. The audio decoder will then decode a down-mixed version of the audio, and a MPEG Surround decoder then can turn this down-mixed audio into a six-channel version. Therefore a non-MPEG Surround enabled audiodecoder will still be able to reproduce a useful downmixed output. The spatial informa-tion in the original six-channel audio is encoded by the MPEG Surround encoder andtransmitted alongside the audio coding data, but usually at a far lower bit-rate. This sideinformation can then be decoded to recreate the six-channel sound.
It therefore becomes possible with an HE AAC base codec combined with MPEGSurround functionality to encode 5.1 surround sound as low as 64 kbps with a qualitythan many listeners would be more than content to listen to. The bit-rate of the spatialinformation in this case could be as low as 3 kbps.
Apart from the standard format 5.1, MPEG Surround is able to transmit variousmultichannel audio formats if necessary, such as 6.1, 7.1 up to 22.1 formats.
3.6.4.1 General Approach
The spatial encoding technique consists of several different components and analysistechniques. Some of them are very similar to those used in Parametric Stereo describedearlier, such as level differences and cross channel correlation. The diagram inFigure 3.20 shows how a typical encoder and decoder combination would work. The Nchannel input signals (x(1. . .N)) are downmixed to (though not exclusively) a stereosignal (d(1,2)), or can use a hand-downmixed stereo signal (x(L,R)). Spatial parametersare calculated from the multichannel and downmixed signals and are transmitted to thedecoder along with the coded downmixed audio signals. The decoder stage will effectivelyupmix the stereo signal according to the spatial parameters the recreate an N channeloutput.
130 Digital Audio Broadcasting
![Page 161: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/161.jpg)
3.6.4.2 Building Blocks of the Decoder
Yet again there are similarities with Parametric Stereo in how MPEG Surround synthe-sizes the audio signals. The initial stage is to transform the downmixed input into thefrequency domain using a hybrid QMF analysis filterbank. The hybrid aspect of thisfilterbank gives it a non-uniform frequency resolution which more closely matches theresponse of human hearing.
The second stage is to generate a multichannel version of the frequency domain signal.The signal is upmixed using the upmixing matrixes. Then the spatial parameters controlthe processing of the upmixed version of the signal, including the use of decorrelators togenerate a spatially realistic sound.
The final stage is a hybrid QMF synthesis filterbank to turn the signal back into thetime domain, but with the multiple channels.
3.6.4.3 Downmixing and Upmixing
The downmixing parts of the encoder and upmixing parts of the decoder each consist oftwo different elements, from which any combination of down/upmixing can be achieved(e.g. 5.1 to 2 channel, 7.1 to 5.1). The first element is a One-To-Two (OTT), which whenin a decoder upmixes a single channel signal to a two-channel signal. Likewise, in anencoder its equivalent would downmix from two to one channel. The second element is aTwo-To-Three (TTT) which, as the name suggests, converts two channels to threechannels in the decoder, and vice-versa in the encoder version.
An OTT encoder element will mix the two channels together and will generate twospatial parameters, and a residual signal along with the downmixed mono signal. Thedecoder version of the OTT will take in the mono signal and use the spatial parameters todrive the generation of the two channel output. If the residual signal is available to thedecoder, it can be add this to reproduce the original two channel signal.
Figure 3.20 Spatial encoding and decoding
Audio Services and Applications 131
![Page 162: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/162.jpg)
The spatial parameters used in an OTT element are Channel-Level Difference (CLD)and Inter-channel coherence (ICC). These are very similar to IID and ICC as used inParametric Stereo (see section 3.2.5).
The TTT encoder element will generate a third channel from the two input channelsassuming a linear combination of the three. This may typically be a left-right to left-centre-right transformation. As with OTT elements it generates spatial parameters, inthis case known as Channel Prediction Coefficients (CPC). It also generates a residualsignal which can be used to improve the quality that the parameters cannot model.
The diagrams in Figure 3.21(a) and (b) show how a 5.1 to stereo encoder and a stereo to5.1 decoder can be constructed with OTT and TTT elements. Note how the channels aregrouped with each element so that the most likely similar sounding channels are together.
Figure 3.21 Downmixing/upmixing decoders with OTT and TTT elements(a) converting 5.1 to 2 channels, (b) converting 2 channels back to 5.1
132 Digital Audio Broadcasting
![Page 163: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/163.jpg)
Decorrelation, Temporal Shaping and SmoothingThe OTT and TTT encoder elements generate spatial parameters, including the ICCvalues that represent how spatial a sound is. To synthesise this diffuseness, thechannels must be made to be more dissimilar to each other than just in levels. Byusing decorrelators in the frequency domain, this can be achieved. These decorr-elators are implemented with lattice all-pass filters. To balance the amount ofdiffuseness in the sound, the decorrelated signals are mixed with the unfilteredversions. A side effect of this is temporal smearing, an artefact well known toaudio coding experts.
To counteract temporal smearing (also known as pre-echo) some processing is carriedout in the time domain. Each of the QMF bands can be processed separately andtransformed in the time domain, and only the higher frequency bands are usually dealtwith. The signals are modified by a time-domain envelope that has been calculated tominimise the smearing artefacts.
If the spatial parameters change values too rapidly from frame to frame, which is aparticular problem at low bit-rates where the quantisers are very coarse, then unpleasantspatial artefacts can occur (e.g. image jumping around). The counteract this problem, thedecoded spatial parameters can be smoothed over time to remove step-changes to theimage.
Residual CodingThe OTT and TTT elements, as described earlier, produce two output streams. Onestream contains the spatial parameters that are used in the main bit-rate reductionscheme. The other, less commonly used stream, is the residual signal. This is essentiallythe difference between the decoded spatial audio and the downmixed signal. By addingthe residual to the synthesised multichannel signal the original multichannel signal can berecovered. Naturally, it would not be practical to send this pure residual signal as it wouldrequire a high bit-rate. However, it can also be encoded to reduce its data requirements,so can be transmitted along with the spatial parameters data to improve quality.Normally the residual signal would be discarded as the spatial parameters alone wouldprovide sufficient quality for many applications; but at higher bit-rates the residual signalcould help raise the quality still further.
Mono or Stereo DownmixingMPEG Surround is capable of working with either stereo or mono downmixedversions of the multichannel original. While using a stereo downmix would producea better quality in terms of imaging, and also better downwards compatibility withstereo material; the option of using a mono downmix is a useful one for lower bit-rate applications. Where the bit-rate is at a premium coding the audio with a monosignal would produce better audio quality than a stereo signal (if you compare AudioLayer II at 96 kbps mono and 96 kbps joint-stereo this becomes blatantly obvious!).Therefore a compromise with spatial quality becomes very worthwhile when thefundamental quality of the audio can be improved. The non MPEG Surroundcapable decoder can evaluate parametric (PS) data to generate a two-channel stereooutput signal.
Audio Services and Applications 133
![Page 164: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/164.jpg)
3.7 Other Advanced Audio Applications
The introduction of MPEG-2 and MPEG-4 coding features into the DAB standardprovides additional possibilities which distinguish once more the DAB system fromconventional radio systems. These features are taken further in DAB+ with the HEAAC v2 coding scheme, using the MPEG Surround functionalities.
3.7.1 Multilingual Extension
A good case for providing a multilingual service in combination with surround sound isgiven when the spoken contribution is not part of the acoustic environment that is beingportrayed. Surround sound sports effects can be combined with multiple language monocommentary channels. In contrast, surround soundwith drama would require a new five-channel mix for each additional language.
An important issue is certainly the ‘final mix in the decoder’; that means the reproduc-tion of one selected commentary/dialogue (e.g. via a centre loudspeaker) together withthe common music/effect stereo downmix (examples are documentary film, sport repor-tage). If backward compatibility is required, the basic signals have to contain theinformation of the primary commentary/dialogue signal, which has to be subtracted inthe multichannel decoder when an alternative commentary/dialogue is selected.
3.7.1.1 MPEG-2 Audio Layer II
MPEG-2 Audio provides alternative sound channel configurations in the multichannelsound system, for example the application of the ‘second stereo programme’ might be abilingual 2/0-stereo programme or the transmission of an additional binaural signal.Other configurations might consist of one 3/2 surround sound plus accompanyingservices, e.g. clean dialogue for the hard-of-hearing, commentary for the visuallyimpaired, multilingual commentary, etc. For such services, either the multilingual exten-sion or the ancillary data field, both provided by the MPEG-2 bit-stream, can be used.This provides excellent speech quality at a bit rate of 64 kbps and even below, makingvery little demand on the available capacity of the transmission channel [BPN 021].
3.7.1.2 HE AAC v2
Providing additional audio channels for alternative audio services with HE AAC withparametric surround or stereo is not something that can be achieved easily. Parametricsurround is based on the audio channels having a level of correlation and the assumptionthat it is single programme, rather than several independent pieces of audio. However asHE AAC can produce good quality at lower bit-rates, the practical route to providingadditional channels would be to use another coded stream. For example, the main stereoprogramme could be coded with HEAAC v2 at 64 kbps and an additional clean dialoguechannel could be provided with HE AAC at 24 kbps.
At higher bit-rates where surround sound programmes are used and encoded withdiscrete channels (i.e. not using parametric surround) then encoding an additionalchannel as part of the main coded stream would be possible. For example a 5.1 pro-gramme with an additional stereo commentary could be encoded using a single eight-channel codec rather than two separate codecs.
134 Digital Audio Broadcasting
![Page 165: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/165.jpg)
In addition to these services, broadcasters should also be considering services forhearing-impaired consumers (for more details see section 3.7.3). In this case a cleandialogue channel (i.e. no sound effects) would be most advantageous.
All thosepointed featurescanbesolvedadvantageouslybyusingthenewMPEG-4codingfunctionality of object oriented coding; this is the Spatial Audio Object Coding (SAOC).Similar to regular SAC (Spatial Audio Coding) and based onMPEGSurround (MPS), seesection 3.6.4, the object-oriented SAOC encoder receives the individual input signals (i.e.audioobjects) andproducesoneormoredownmix signals plus a streamof side information.Onthe receivingside, theSAOCdecoderproducesa setofobjectoutputs thatarepassed intoa rendering stage generating anoutput for a desirednumberof output channels and speakersetup. The parameters of the renderer can be varied according to user interaction and thusenable real-time interactive audio composition [Herre, 2007]
3.7.2 Half Sampling Rate Coding
MPEG-1 audio was extended through the MPEG-2 extension to lower samplingfrequencies in order to improve the audio quality for mono and conventional stereosignals for bit rates at or below 64 kbps per channel, in particular for commentaryapplications. This goal has been achieved by reducing the sampling rate to 16, 22.05 or24 kHz, providing a bandwidth up to 7.5, 10.5 or 11.5 kHz. The only differencecompared with MPEG-1 is a change in the encoder and decoder tables of bit ratesand bit allocation. The encoding and decoding principles of the MPEG-1 Audio layersare fully maintained.
Table 3.3 shows audio modes and bit rates for the 48 kHz and 24 kHz sampling rate.For a comparison of audio quality at half-sample rate and full rate.
Table 3.3 Audio modes and bit rates for 48 kHz and 24 kHz sampling rate
Sampling Rate 48 kHz 48 kHz 48 kHz 48 kHz 24 kHz
Mode Single Ch. Dual Ch. Stereo Int. Stereo All
Bit Rate [kbps] Bit Rate [kbps]
32 X 8
48 X 16
56 X 24
64 X x X x 32
80 X 40
96 X x X x 48
112 X x X x 56
128 X x X x 64
160 X x X x 80
192 X x X x 96
224 x X x 112
256 x X x 128
320 x X x 144
384 x X x 160
Audio Services and Applications 135
![Page 166: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/166.jpg)
3.7.3 Audio Broadcasting for the Hearing Impaired
It is well known that the percentage of people with impaired hearing is increasingdramatically, both within the younger and the older generations. For many years theITU-R [CCIR, 1991] has been looking for a means of broadcasting audio with higherintelligibility for people with impaired hearing. The target is to provide better audibilityin general and higher speech intelligibility in particular for hearing-impaired customersof audio and TV broadcasting services. Ideally, an additional speech programme wouldbe provided with higher intelligibility for interested people. This would be pre-processedin an appropriate manner, and could be further individually adjusted in the receiveraccording to the listener’s need or preference.
New digital broadcasting systems such asDAB andDigital Video Broadcasting (DVB)provide possibilities for incorporating additional (associated) services for the hearingimpaired, using the multi-programme features of MPEG-2 coded audio bit-streams, andprobably other features of MPEG-4. Some initial discussions between a number ofbroadcasters, network providers and medical institutes led to some basic proposals[Hoeg, 1997], but no further progress has been reported, yet.
3.7.3.1 Signal Processing at the Studio Side
Some technological measures at the studio side can be made during the productionprocess of broadcast programmes in order to improve the audibility of the programme,in particular the speech part.
Signal-to-noise ratio.Firstly, it is necessary to avoid introducing into the studiomix of theaudio programme anything which is at a sufficiently high level that it significantlyinterferes with the audibility or intelligibility of the programme element which is of thegreatest importance to the listener. For example, if the dialogue in a film or dramaproduction is accompanied by intentional background noise (such as music or effects) itis important to ensure good intelligibility of the dialogue, if necessary by setting the levelof the music or effects at a relatively low level. If we apply the term ‘signal to noise ratio’(SNR) here to mean the ratio between the levels of the most important programmeelement and the background noise (i.e. the ratio between the dialogue and the effects) onecan say that for people with normal hearing a SNR of about 6 dB would be satisfactory.For the hearing-impaired listener a SNR of more than 10 dB is necessary in order toensure the intelligibility of speech [Mathers, 1991].
Separation of the speech programme. Ideally, a separate ‘clean’ speech channel should beproduced and transmitted for the benefit of listeners with impaired hearing. The hearingimpaired listener could then adjust the relative levels of speech and effects in an indivi-dual final mix, or even dispense altogether with the effects if required.
If this is not possible, the so-called ‘Music/Speech-Flag’ (see section 3.5.2) could beused to activate appropriate measures to improve the intelligibility of speech in thereceiver.
Filtering. Typically, the frequency range of the hearing impaired is limited to the mediumfrequency bands. Therefore, the separate speech signal could be filtered at the studio side
136 Digital Audio Broadcasting
![Page 167: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/167.jpg)
in order to avoid the transmission of extreme high or low frequencies, which canadversely affect intelligibility. A further consequence of such filtering would be to reducethe data rate requirements of MPEG audio coding systems carrying the bandwidth-reduced signal.
At the receiving side, more specific filter characteristics could be used, depending uponthe individual hearing problems of the user.
3.7.3.2 Features of MPEG Audio Coding
MPEG audio coding, in particular its specification for DAB [EN 300401], provides anumber of additional features which can be profitably used for the transmission andprocessing of programme signals for the hearing impaired. A general benefit of MPEG-4audio coding [IS 14496] is the very low bit-rate which can be used for transmission of theadditional speech channel. It can be coded with a bit-rate much less than 64 kbps(probably using the SBR Spectral band replication enhanced AAC coding schemes[Meltzer, 2002], [Stoll, 2002], see also section 3.2.4).
MPEG-4 audio coding provides a number of additional features such as Pitch controland Speed control which can be profitably used for the transmission and processing ofprogramme signals for the hearing impaired. An MPEG-4 coded bit stream can beadditionally transmitted easily within an MPEG-2 Audio bit stream, for instance withthe so-called Ancillary data.
Dynamic Range Control.As already explained in section 3.5.1 in detail, in many cases thedynamic range commonly used by the broadcasters (approx. 40 dB) may be much largerthan the wanted dynamic range (the so-called reproduction dynamic). This is particularlyimportant for listeners with many types of hearing impairment, including most forms ofage-related and noise-induced deafness.
As previously described, a DRC signal can be generated at the studio side, whichdescribes the audio gain to be applied in the receiver. This DRC signal is transmittedtogether with the audio signal within the MPEG bit stream (MPEG-2 uses theProgramme associated data, PAD; MPEG-4 can transmit those data within the audiobit-stream). In the receiver, the regenerated DRC signal may be used optionally tocontrol the audio gain in order to match the dynamic range of the received audioprogramme to the requirements of the listener, in order to reduce discomfort andimprove audibility (in particular the intelligibility of speech).
Multilingual channels. An MPEG-2 audio bit-stream can transmit up to seven separatechannels additionally to the main service in two-channel or 5.1.channel format.MPEG-4HE AAC can transmit an unlimited number of extra channels/signals. Those additionalmultilingual channels can be used not only for extra commentary channels, but also for aseparate clean speech signal for the hearing impaired. All of these channels can bedecoded simultaneously by the same decoder chip in a receiver.
Pitch control. This special feature of MPEG-4 audio coding means that the pitch of anaudio signal can be changed at the receiving end without changing the duration ofpresentation. This could be used to align the frequency range of the audio signal to theindividual needs of the hearing impaired customer.
Audio Services and Applications 137
![Page 168: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/168.jpg)
Speed control.Another interestingMPEG-4 feature is to change (in particular, to reduce)the presentation speed of the speech programme in real time in the decoder (withoutchanging the pitch of the signal), in order to improve the intelligibility of the speechcontent.
A similar method of speech rate conversion in order to improve the audibility forelderly people has been tested successfully in Japanese TV, see [Miyasaka, 1996].
3.7.3.4 Proposal of a Possible Scenario
The measures mentioned above could be combined in a system solution for DAB(or DVB) in order to improve the audibility of audio programmes for the hearingimpaired, as proposed in [Hoeg, 1997]. All these components are already con-tained in the corresponding DAB or DVB system standards and require littleadditional bit-rate. For a block schematic diagram of a possible arrangement seeFigure 3.22.
Source encoderMPEG 2 - LII
Con-tinuitymixer
DRCgenerator
Source encoderMPEG 4
DRCgenerator +compressor
Studio side(programme provider)
Set-top box
Music/Speech-Flag
Mainservice
DABMPX
PAD
Ancillaryservice
DABor DVB
receiver
MPEG-2DEC
MPEG-4DEC
DRCDEC
Pitch-control
Speed-control
Filter
Speech/Music-control
Multiplex-network area
Receiving side
IR
Userinterface
Display
Figure 3.22 A possible scenario for programme transmission incorporating facilities for thehearing-impaired [Hoeg, 1997]
138 Digital Audio Broadcasting
![Page 169: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/169.jpg)
The idea is to produce (to extract) at the studio side a separate speech (commentary)programme signal, to pre-process it in an appropriate manner and to transmit it inparallel to the (non-processed) main programme signal, which may contain commonaudio information such as speech, music, environmental information etc. as usual. Thepre-processing of the separate speech signal should be focused on those parameters whichare relevant to the most frequently occurring problems of hearing, such as restrictedfrequency range, and discomfort with a wide dynamic range.
In particular, a setting for Dynamic Range Control (DRC) can be applied individuallyto the two programme components (speech andmain programme). The use of theMusic/Speech-flag can help to choose the right parameter settings at the receiver, dependingupon the character of the programme.
Themain programmewill be encoded in anMPEG-1/2 audio bit-streamaccording to theDAB standard,which also carries theDRCandM/S information in the PAD.The separatespeechchannel canbeencodedeither inMPEG-2(half-sampleratecoding,see section3.7.2.)or in MPEG-4, probably using one of the new SBR enhanced coding schemes. In the firstcase, the speech signal can be transmitted with a very low additional bit-rate within themultilingual channels of theMPEG-2 bit-stream. In the other case, theMPEG-4bit-streamcan be inserted into the ancillary data field of theMPEG-2 bit-stream.
After transmission the completed programmes are received with a conventional DABor DVB receiver. In a specially designed set-top box (or a specially equipped receiver) theprogramme can be adjusted to the individual needs of the hearing-impaired customer.This includes:
• decoding of the transmittedMPEG-2 and/or MPEG-4 bit-streams, the DRC data andthe M/S control signal;
• application of the special features such as filtering, Dynamic range control, Pitchcontrol and/or Speed control;
• production of a final output signal by taking the special signal for the hearing-impaired listener, applying such processing as may be required, and possiblymixing this with the main programme, to create audio with improved audibilityand intelligibility.
3.8 Quality of Service
The quality of service in digital transmission systems is typically much more constantthan with analogue transmissions, such as FM or AM. In a digital transmission system,two layers of coding are used. The channel coding provides a very robust, transparentdata channel. Error protection and correction measures are tailored to the specifictransmission environment, such as a moving, mobile receiver in the presence of largeechoes. The source coding is adapted to the nature of the data; in the case of DAB this isthe audio signal. Its purpose is to reduce the necessary channel capacity (bandwidth) ofthe signal, without major impairments of audio quality.
The audio quality in a DAB system is therefore mainly determined by the sourcecoding algorithm, implementation and the operational parameters, such as bit rate,sample rate and coding mode.
Audio Services and Applications 139
![Page 170: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/170.jpg)
3.8.1 Analogue vs Digital Transmission
In an analogue transmission, any change of the transmission channel and anydeviation from the optimum channel/directly influence the audio quality. Typicaleffects are interference between stations, fading due to reflections from buildings orcars and noise injection from nearby engines, ignition systems and others. Socommon are these impairments that we often fail to notice them at all. Little orno remedy is available.
In a digital transmission system a clear separation between the channel coding and thesource coding enables these impairments to be minimised or eliminated. The errorprotection of the channel coding is so strong that it can provide a transparent channelfor the source data under almost all conditions. Time varying changes of the transmissionpath do not affect the source data, unless the channel coding breaks down, whichhappens rarely.
The resulting audio quality is nowmainly determined by the source coding scheme andits operational parameters, such as sample frequency, bit rate or coding mode etc. and islargely independent from the characteristics of the actual transmission path. This alsomeans that even with a perfect transmission path, the audio quality can be limited, if theoperational parameters are not set appropriately. In the event of transmission errors, theaudio quality can drop dramatically, depending on the error protection and concealmentthat is available in the channel or source decoders.
In the age of digital transmission, the audio quality is no longer defined byobjective measures like the signal-to-noise ratio, linearity, distortion and band-width. With the advent of perceptual audio coding, a signal with 13 dB SNR(Signal-to-Noise Ratio) can be a truthful representation of a 16-bit signal. Audioquality needs to be defined in relation to the uncompressed original signal and theperceived differences between this reference and the signal that is delivered to thelistener. Traditional quality measures provide only limited information aboutthe actual audio quality and can be misleading. It is necessary to develop newmethods, as described in subsequent sections.
The quality of the reference is a moving target itself. Most consumers regard CDquality as state of the art, whereas years ago vinyl discs used to enjoy this reputation.With the introduction of higher quality formats, such as Super Audio CD (SACD) andDVD-Audio, this changes again. At the same timemany people find the quality providedby highly compressed audio data (for instance produced by MPEG-2 Layer3 encoding,usually designed asMP3) perfectly well suited for casual listening, although this provideslower perceived quality than a standard CD. Against this background it is clear that anyquality measure must be based on the difference between the uncompressed originalsignal and the coded version.
The impairments introduced by a coding system include linear distortion, quantisationnoise, pre-echoes, bandwidth limitations, alias components, change of stereo image andtimbre. Table 3.4 shows the most relevant categories of artifacts that may occur withdigital coding or transmission techniques [BS.1284].
The AES have published an excellent educational/tutorial multi-media CD-ROMwith many specific audio examples and explanations of audio coding effects[AES, 2002].
140 Digital Audio Broadcasting
![Page 171: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/171.jpg)
3.8.2 Audio Quality vs Bit Rate
The perceived audio quality of any perceptual coding scheme depends on the bit rate in anonlinear fashion. At the higher bit rates differences between the original and coded-decoded signals can be imperceptible. As the bit rate is reduced, a point is reached wherethe quality begins to deteriorate. At this point the coding scheme simply cannot providesatisfactory results and a number of different artefacts (such as quantisation noise, band-width limitation and change of the stereo image) can be perceived.
The MPEG-1 standard (as it is typically used at the time in DAB) specifies a samplerate of 48 kHz. MPEG-2 has defined an extension to 24 kHz. Both are allowed in DAB.
The extension to lower sample rates provides a better frequency resolution for signalswhich can be band limited, such as speech programmes. These constitute a significantpart of broadcasts.
The data presented in Figure 3.23 are taken from [EBU, 1999]. It is a summary ofmultiple different listening tests, performed by several international organisations. Thelistening tests were executed according to ITU recommendation [BS.1116] and the scaleused (see Table 3.5 below) is that of absolute impairment when compared to the original.The three points for each bit rate give the mean score for the least critical item and the
Table 3.4 Categories of artefacts that may occur with digital coding or transmission techniques(similar to [BS.1284])
Artefact Category Explanation
Quantisation defect Defects associated with insufficient resolution, e.g. granulardistortion, changes in noise level
Distortion of frequencycharacteristic
Lack of high or low frequencies, excess of high frequencies,formant effects, comb-filter effects
Distortion of gain
characteristics
Change in level (gain) or dynamic range of source signals, level
jumps (steps)
Periodic modulation effect Periodic variations of signal amplitude, such as warbling,pumping or twitter
Non-periodic modulationeffect
Effects associated with transients, e.g. deformation of transientprocesses
Temporal distortion Pre- and post-echoes, ‘‘smearing’’ (loss of time-transparency)
Extra sounds (noise) Spurious sounds not related to the source material, such as
clicks, noise, tonal components
Missing sound Loss of sound components of the sourcematerial, e.g. caused byincorrect decisions of the masking model exacerbated by ageneral shortage of bits
Correlations effect (crosstalk) Linear or non-linear crosstalk between channels, leakage or
inter-channel correlation
Distortion of spatial imagequality
All aspects including spreading, movement, localisationstability or accuracy of phantom sources, balance, change ofspaciousness
Audio Services and Applications 141
![Page 172: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/172.jpg)
most critical item above and below the mean score over all items in the middle. The audioquality for a certain bit rate and setting depends on the actual codec implementation,because the psycho-acoustic model and the bit allocation strategy are not part of thestandard and are subject to continuing research.
The figure shows that, as the bit rate of a 48 kHz-sampled signal is reduced, apoint can be reached where the perceived quality is improved by reducing the samplerate to 24 kHz. The results given above can only be an indication of the generaltrend, but should not be used as the only rule to set all the coding parameters in thedaily practice.
For further information on the relationship between quality and bit rate see[AES, 1996].
3.8.3 Subjective Quality Assessment
The ITU has developed recommendations for subjective listening tests for small impair-ments, after realising that the development of new and better coding schemes and theirwidespread use will require a sensitive method for assessing the quality of coded materialand that test results need to be comparable and reproducible. Since the impairmentsdepend to a large extent on the coding system and the test items, considerable effort hasbeen put into procedures for the preparation of test material and the selection of testitems. Finally the method is not defined in terms of known artifacts, but recognises thateach new coding scheme is likely to introduce new types of impairments. The resultingmethod can be utilised, independent of the quality of the reference and the types ofartifacts introduced. The only limitation is posed by the fact that the impairments should
–4,0
–3,0
–2,0
–1,0
0,0
1,0
0 50 100 150 200 250 300
Bit rate [Kbps]
Half-Sampling Rate CodingMPEG-2 Audio
Full-Sampling Rate CodingMPEG-1 Audio
Sub
ject
ive
Diff
-Gra
de
Figure 3.23 MPEG Audio Layer II, stereo: Quality versus bit rate and sampling rate
142 Digital Audio Broadcasting
![Page 173: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/173.jpg)
be small. In the presence of large impairments (such as those typically introduced by aspeech codec) the method is not suited to resolve small differences between codecimplementations.
Finally, it should be noted that theMPEG-Audio Layer 2 coding system, which is usedwith DAB, is one of the best tested coding schemes worldwide (see for instance[AES, 1996], [EBU, 1999]).
3.8.3.1 Test Methodology
Since broadcasters try to provide the best quality possible, a measure for small impair-ments has been created by the ITU [BS.1116], [BS.1283], [BS.1284].
The semi-continuous five-point impairment scale, given in Table 3.5 is used tomeasure differences between the original and the coded and decoded version. Thisrelative scale allows for arbitrary absolute quality of the reference and normalisesany impairments.
The highest grade (5.0) is given when no difference is perceptible between the referenceand the signal under test. The lowest grade (1.0) is given when the differences are veryannoying. All grades must be within this range. The subjective difference grade (SDG) isdefined as the difference between the grade given to the hidden reference signal and thesignal under test in a listening test. It allows comparisons between different tests and tonormalise the results between different tests. This is described in detail in the next section.
Since each listener has different physiology and expertise, the SDG given by onelistener may be different from that given by another listener. In a listening test, this istaken into account by presenting the SDG with confidence intervals that represent thespread between all expert listeners involved.
An expert listener has been trained to notice and identify these artifacts when compar-ing the coded versionwith the original, and he can often even notice themwithout explicitknowledge of the original signal. Untrained listeners can usually acquire this expertise ina matter of days. Repeated exposure to artifacts can make them obvious even to a casuallistener in an imperfect environment. It is for these reasons that the method described inthe next section strives to be as sensitive as possible, even if most listening is done inimperfect environments (e.g. noisy cars) by average listeners.
Small impairments may not be obvious to all listeners, under all listening conditionsand their presence depends on the actual test signal. Since the methods discussed in thischapter strive to detect even the smallest impairments, they require expert listeners, a
Table 3.5 ITU Five Point Impairment Scale [BS. 1284]
Grade Description of Difference with Reference
5.0 Imperceptible
4.0 Perceptible, but not annoying3.0 Slightly annoying2.0 Annoying1.0 Very annoying
Audio Services and Applications 143
![Page 174: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/174.jpg)
controlled and optimal listening environment and the most critical items for a givensource coding scheme.
The core of the test is a listening session where an expert listener compares two versionsof the material with the original (here called ‘reference’). One of the two versions beingevaluated is the reference, the other is the coded and decoded signal. The listener is nottold which of the two versions being evaluated is the reference, therefore it is known asthe ‘hidden’ reference (to distinguish it from the signal known to be the original). Thelistener has two tasks: first to identify the hidden reference (which must be given a gradeof 5.0), then to grade the version that he identified as the coded signal. Since impairmentsare supposed to be very small or not noticeable at all, the listener may err in the first partof the task. In this case he may grade the hidden reference with something less than 5.0.When the results are then converted to subjective difference grades, these can take onnegative values and the resulting confidence intervals from all listeners may extendbeyond the zero line. This typically happens when a codec is so good that it does notintroduce any noticeable artifacts (or only very small ones).
The test is said to be ‘double blind’ since neither the listener nor the test operator knowswhich of the signals is the hidden reference and which is the coded and decoded version.This set-up prevents any bias on the side of the listener or interference from the testoperator. It is well known that a person who is asked to grade a signal that he knows to becoded will give it a lower grade than in the blind assessment.
The ITU-R recommendation [BS.1116] describes the necessary listening environmentand requires full disclosure of acoustic and electro-acoustic measurements.
Prior to the actual grading sessions, listeners are trained in small groups. The listenerslearn the test procedure during the training and can familiarise themselves with the testmaterial, the artifacts and the equipment used.
Another test method called MUSHRA (Double-Blind MUlti Stimulus test withHidden Reference and Anchor) was developed by the EBU and specified after by theITU-R [BS.1342], especially designed for tests of systems or signals with lower qualitylevels, the so called Immediate quality level.
3.8.3.2 Test Preparation
The outcome of any subjective test depends strongly on the items that are being graded.Perceptual codecs often provide good quality across a wide range of material, but foreach codec a specific set of items reveals its weaknesses. Since subjective tests are oftenused to determine which codec is to be used in an internationally standardised system (fordigital radio, digital TV and storage based systems), any test must strive to provide a fairand balanced selection between test items.
Itemsshouldnotincludeartificialsignals,whoseonlypurpose is tobreakacodec,butmustbe what is called ‘typical broadcast material’. The reasoning is that a test should predict thebehaviour in a practical set-up, instead of being solely a scientific investigation of thepotential weaknesses of a coding scheme.An independent selection panelmakes a selectionfrommany different items, before picking some 10 to 15 for the final test.
The ITU described method has been crafted to allow comparison between testsperformed at different times by different organisations. So-called anchors can be
144 Digital Audio Broadcasting
![Page 175: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/175.jpg)
included in a test. These are coded versions of well-known items that have been includedin many tests with the exact same encoding applied. If test results are comparable, thenthe average grades of these anchors should be the same across different tests. If they are,results from different tests can be compared directly. If they are not, this may be anindication that something during the test was very different from other tests and thatcaution should be applied when interpreting the results or comparing them with theoutcome of other tests.
3.8.3.3 Analysis and Presentation of Results
The ITU recommendation [BS.1116] requires a full disclosure of the listening testprocedure in a report. Any deviation from the procedure, any anomalies and reasonsfor rejecting listeners needs to be explained. Without a thorough description of all stepsinvolved, a test report probably conceals more than it reveals.
A statistical analysis follows the grading phase once all listeners have concluded thesessions. A simple t-test is performed on the grades to identify and reject those listenerswho were not reliably capable of identifying the hidden reference. The anchors usedduring the test usually lie at the lower end of the scale and an expert listener must be ableto spot these. People may fail to do so because they misunderstood the instructions forthe test execution, became bored during the grading session or are simply not expertlisteners. Whatever the reason, these listeners’ results need to be removed, before anyconclusion can be drawn.
The absolute grades for each test session are converted to difference grades (grade ofactual signal under test minus grade of reference). A proper identification of the hiddenreference results in a negative difference grade, a wrong identification results in a positivedifference grade. The data from all listeners for each item and codec is presented withconfidence intervals and mean values. The interpretation is that an expert listener willgive a difference grade somewhere inside of the confidence interval with a probabilityof 95%.
When the confidence intervals of two codecs overlap, for a particular item of testmaterial, there is no statistically significant difference between the two, even if adiagram may suggest so. Only when the confidence intervals do not overlap at all,can one draw the conclusion that one codec might sound better than the other forthis particular item.
Although tempting, it may not be very meaningful to average the grades given to allitems for one codec. It is recommended that a codecmust perform up to a certain level forany and all items, not on average across all items. The presentation of the results per itemallows a better judgement of worst-case performance, average performance and perfor-mance to be expected in the field.
3.8.4 Subjective Tests for AAC Codec Family
While the AAC codec has been around for over a decade now, the SBR and PS extensionsthat give us the HE AAC v1 and v2 codecs, and MPEG Surround are far more recentdevelopments, and therefore have not been so widely tested. At the time of writing there
Audio Services and Applications 145
![Page 176: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/176.jpg)
has yet to be a set of tests covering the full range (of sensible bit-rates at least) of AAC bit-rates and combinations for DAB+. However, an EBU group known as D/DABA iscurrently working on subjective tests for DAB+, including performance in error-prone(i.e. realistic radio reception) channels.
To help give an impression of the performance of AAC and its various offspring,some subjective tests covering various versions over the past few years are sum-marised here.
3.8.4.1 AAC vs Audio Layer II
In 1998, the Communications Research Centre (CRC) carried out some of the earliestlistening tests on AAC [Soulodre, 1998]. Among the codecs tested wereMPEGAAC (thecore codec in those early days) and MPEG Audio Layer II, which are of most interest tous for the purposes of DAB and DAB+.
The listening tests were performed using the BS.1116 technique, which gives animpairment scale of 0 (no perceptible difference) down to �5 (very annoying). Thismethod is aimed at higher quality coded audio, and cannot be directly compared withan absolute quality scale that would be used in a MUSHRA test.
There were numerous codec and bit-rate combinations covered in the tests, rangingfrom 64 kbps to 192 kbps; withMPEGAudio Layer II (hardware and software versions),Layer III, MPEG AAC, Dolby AC-3 and PAC all tested.
To highlight the combinations that are of interest to DAB, four out of these combina-tions have been selected for comparison. These are:
1. MPEG Audio Layer II at 128 kbps at 32 kHz sampling frequency.2. MPEG Audio Layer II at 192 kbps at 48 kHz sampling frequency.3. AAC at 96 kbps at 32 kHz sampling frequency.4. AAC at 128 kbps at 48 kHz sampling frequency.
While 128 kbps is the most common bit-rate for DAB with Layer II, it is worth notingthese tests used a 32 kHz sampling frequency, which is different to the 48 kHz used inDAB, so the results may differ somewhat. For these tests eight different test items (criticalmusical excerpts) were chosen.
In Figure 3.24, the results for each codec are shown for each test item and the averageover all test items.
It can be seen that AAC at 128 kbps out-performs Layer II at 192 kbps, and AAC at96 kbps is of similar performance to Layer II at 192 kbps. Some test items really highlightthe difference in performance between codecs. For example, the test item Pitch pipe(‘pitchp’) is very tough on Layer II at 128 kbps, but AAC at 128 kbps deals with itvery well.
It is worth remembering the tests were carried out in 1998, and the encoderalgorithms have improved since then; but it does give an indication of the perfor-mance of the AAC core codec in comparison with Audio Layer II. Naturally, it isworth reading the actual publication to see the complete set of results and meth-odology used in the tests.
146 Digital Audio Broadcasting
![Page 177: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/177.jpg)
3.8.4.2 HE AAC at 24 kbps Mono
In 2002 the BBC performed some listening tests on the AAC codec comparing its variousversions with or without SBR at a particular bit-rate. The results were reported in[Meltzer, 2002], which summarises how SBR can be combined with AAC.
The codec combinations, all at 24 kbps mono unless stated, used in the MUSHRAtests were:
1. AAC Pure – Standard AAC.2. AAC SBR – HE AAC.3. AAC SBR Core – The AAC core codec only in HE AAC.4. AAC Wideband – Standard AAC (this was set to 32 kbps, not 24 kbps).5. 3.5 kHz anchor.6. 7 kHz anchor.7. Hidden Reference – the original signal, not bandwidth limited.
The results in Figure 3.25 show how SBR (HEAAC) improves the scoring over standardAAC by nearly 30 points at this bit-rate. It also shows that HE AAC at 24 kbps is betterthan standard AAC at 32 kbps.
Figure 3.24 Test results for MPEG AAC and Audio Layer II codecs
bascl¼Bass clarinet arpeggio; dbass¼Bowed double bass; dires¼Dire Straits;hpscd¼Harpsichord arpeggio; mrain¼Music and rain; pitchp¼Pitch pipe;trump¼Muted trumpet; vegla¼Susan Vega with glass
Audio Services and Applications 147
![Page 178: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/178.jpg)
3.8.4.3 HE AAC with Surround Sound
In 2006 the EBU performed some audio quality tests on multichannel audio codecs. Thecodecs included were Dolby Digital, Dolby Digital+, Windows Media Audio (twoversions), MPEG Layers II & III, DTS, AAC and HE AAC. A variety of bit-ratesranging from 1500 kbps down to 64 kbps were tested all with 5.1 channels. Of particularinterest to DAB+ are the results of the HE AAC codecs that were tested at five differentbit-rates. Some of the codecs were still under development at the time of the tests, soimprovements have been made since the tests. In fact, the tests provided valuableinformation to the codec designers to help with these improvements. The full resultscan be found in EBU doc [Tech3324].
The codec and bit-rate combinations of interest to DAB+ are:
• HE AAC+MPEG Surround at 64 kbps and 96 kbps;• HE AAC 5.1-channel at 128 kbps, 160 kbps and 192 kbps;• AAC 5.1-channel at 256 kbps and 320 kbps.
Ten test items were used, carefully selected to be both critical and represent a wide rangeof material.
Figure 3.25 Test results for 24 kbps mono AAC versions
148 Digital Audio Broadcasting
![Page 179: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/179.jpg)
The MUSHRAmethodology [BS.1342] was used in these tests, despite the reasonablyhigh quality expectation. Due to the large size of the test, it was felt that [BS.1116] wouldbe too time consuming for the listeners. One aspect of the results that was felt importantto include was the score of the worst scoring item. Listeners will always notice badartefacts even if the overall audio quality is generally high, and by just looking at anoverall average, this problem can be overlooked; hence the need to check for troublesometest items.
The results of interest are shown in Figure 3.26. The scores for the hiddenreference, spatial anchor (an image reduced version of the original), and a3.5 kHz low-pass filtered anchor are shown for reference. It is worth rememberingthat the two phases used different test items, so the average scores are likely todiffer somewhat, hence the use of anchors to help highlight these differences. Thehorizontal mark for each codec is the averages score over all test items, with thebox around it the 95% confidence interval. The bottom of the thick line descendingfrom each box represents where the average (over all listeners) for the worse caseitem lies.
The results show that HE AAC at 128 to 192 kbps performs very well with the averagein the good or excellent region. However, the worst-case test item scores in the fair region,which is more of a concern. In this case the item is ‘applause’, which is a commonlyoccurring sound in broadcasting. Partly due to the results (though the applause issue wasquite well known before the tests), the codec developers knew where to concentrate theirefforts on improving the algorithm. Since these tests there have been improved versionsof the HE AAC codecs developed, where the applause item would be expected to scoresignificantly higher.
Figure 3.26 Test results for multichannel codecs
Audio Services and Applications 149
![Page 180: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/180.jpg)
3.8.5 Error Protection and Concealment
Only very limited error protection for the audio bit-stream is provided in the MPEGstandard. Error protection has to take into account the characteristics of the source dataand the transmission channel. The MPEG Audio standards have been written for a widerange of applications with very different transmission channels, ranging from nearlycompletely transparent (i.e. error-free transmission channels, like storage on computerhard disks) to very hostile transmissions paths, like mobile reception with DAB[EN 300401].
3.8.5.1 Error Protection
In the presence of only a very few errors, say with a bit error ratio of about 10–5 to 10–6
and lower, the optional CRC check, provided in the ISO standard, will in general be anefficient tool to avoid severe impairments of the reconstructed audio signal. Errors in themost sensitive information, that is header information, bit allocation (BAL) and scalefactor select information (SCFSI), can be detected. The chance of bit errors in this part ofthe audio frame are small. If, however, one single bit error occurs in these fields, the resultwill be the loss of a complete audio frame. In this case, the result of a single bit error is thesame as if a complete audio frame is lost by a burst error or cell loss.
To protect a listener of ISO/MPEG coded audio signals from annoying distortions dueto bit errors, channel coding has on the one hand the task of correcting as many bit errorsas possible, and on the other detecting any bit errors remaining after correction. In theEureka 147 DAB system, the data representing each of the programme services beingbroadcast is subjected to energy dispersal scrambling, convolutional coding and timeinterleaving. The convolutional encoding process involves adding redundancy to theservice data using a codewith a constraint length of 7. In the case of an audio programme,stronger protection is given to some bits than others, following a pre-selected patternknown as the Unequal Error Protection (UEP) profile, shown in Figure 3.27. Theaverage code rate, defined as the ratio between the number of source-encoded bits andthe number of encoded bits after convolutional encoding, may take a value from 0.33 (thehighest protection level) to 0.75 (the lowest protection level). Different average code ratescan be applied to different audio sources. For example, the protection level of audioservices carried by cable networks may be lower than that of services transmitted in radiofrequency channels.
Even with the best error correction scheme residual bit errors cannot be completelyavoided, and have to be detected, especially for information which is very sensitive to biterrors.
This includes the header and control information, which has been taken into accountby the ISO CRC, but also for scale factors, which has been only partially considered byISO/MPEG.
The optimisation criterion for protecting encoded audio signals against bit errors is notthe minimisation of the bit error ratio as the most important issue, but to minimise theperception of audio signal distortions in the case of bit errors. The subjective annoyanceof bit errors depends strongly on the kind of disturbed data for the ISO/MPEG Audiocoded signal.
150 Digital Audio Broadcasting
![Page 181: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/181.jpg)
Whereas a bit error ratio of 10–4 for sub-band samples results in barely audibledegradation, any single bit error in the control information (header, BAL or SCFSI)causes a total frame error of 24 to 36 ms. The individual bit error ratios have to bebalanced with respect to a certain degradation with the goal of minimising the overalldistortion. Besides the economical aspect due to minimal additional redundancy, a UEPscheme allows for ‘graceful degradation’ which may be very convenient for the listener inthe case of an increase of the bit error rate.
In the case of the Eureka 147 DAB system, the following measures for residual errordetection strategies can be used:
Frame CRC (First Cyclic Redundancy Check), specified by ISO/IEC [IS 11172]. A 16-bitparity check word can be used for the detection of errors in the main audio informationwithin the encoded bit-stream, that is ISO header, BAL and SCFSI. If the CRC isviolated a concealment based on the replacement of non-reliable frames is requested.
Scale factor CRC (Second Cyclic Redundancy Check), specified by Eureka 147/ ETSI[EN 300401]. Up to four 8-bit parity check words can be used for the detection of errors insingle scale factors within sub-band groups. If the CRC is violated a concealment basedon the replacement of non-reliable scale factors is requested.
Reliability information If conventional or punctured convolution codes are used for theerror protection, additional reliability information could be derived by a Viterbi channeldecoder. Reliability information derived by the channel decoder will give more
HeaderBALSCFSI
SCF Sub-band Samples F-PADSCF-CRC
(24 ms Duration)
Example: 192 kbps, Stereo, Protection Level 3, Rav = 0.5
DAB Audio Frame n
Redundancy
n−1
0.33Code Rate: 0.44 0.57 0.42
0.67Redundancy: 0.56 0.43 0.58
n+1
Figure 3.27 Unequal error protection scheme used in the DAB system for an MPEG Audio
Layer II frame
Audio Services and Applications 151
![Page 182: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/182.jpg)
information on the actually violated data and would support the adaptation of conceal-ment to the error situation.
Failure characteristics of the DAB system have also been tested by subjective assess-ment, see for instance [Lever, 1997] or [BPN 011].
3.8.5.2 Concealment Measures
Error correction and error detection strategies can be optimised concerning both theencoded audio signal and the listener’s perception. Although some measures for errorcorrection may have been applied, the channel coding technique has to provide for thedetection of residual bit errors, because every channel code can be overloaded. Severalerror concealment strategies in combination with low bit rate coding, like muting,substitution, repetition or estimation of the disturbed parts of the received encodedaudio data, have already been proposed and described in [Dehery, 1991]. Those techni-ques improve the audio quality in case of transmission errors, but some of them, forexample left/right-substitution, are not compatible with the audio bit-stream, and itcannot be expected that those techniques will be applied.
Applying error concealment techniques should result in the following improvementsfor the listener:
• Improved sound quality at the edge of the coverage area (single and burst errors).• Improved sound quality during difficult mobile reception conditions (single and burst
errors).• Improved sound quality during cell loss in ATM distribution networks (burst errors).• Performance and costs trade-offs between simple and cheap receivers and sophisti-
cated and expensive receivers.
None of these benefits are available to the user in the old analogue system.
3.8.5.3 Frame-oriented Error Concealment
A complete frame or even some successive frames have to be processed with frame-oriented error concealment if the frame CRC indicates an error. Depending on thereceiver’s capabilities several concealment techniques can be applied.
Muting.The simplest method of frame-related error concealment is tomute frames whichare indicated as non-reliable or even non-decodable. Compared with a very annoyingreception the subjective annoyance caused by occasional muting of these framesmight beassessed as lower.
Repetition. Instead of muting, non-decodable frames can be replaced by previouslycorrect decoded frames. The audio quality of a repetition depends strongly on the signalitself; usually it is much better compared to a simple muting. Compared with muting, therepetition of frames needs memory of at least one frame (768 bytes at a bit rate of256 kbps). A longer break of some frames can be bridged by either multiple repetitionof one frame or, depending on thememory provided in a receiver, by a single repetition ofthe necessary number of previously correctly decoded frames.
152 Digital Audio Broadcasting
![Page 183: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/183.jpg)
3.8.5.4 Error Concealment of Scale Factors
Scale factors represent the maximum absolute value of a sequence of samples in each sub-band. Errors in scale factors do not lead to a distortion of one complete frame, but can becompared to a change produced by an equaliser where one or more sub-bands areamplified or attenuated by the disturbed scale factor. If MSBs of scale factors are notdecoded correctly, ‘beeping’-type impairments are produced and perceived as ‘veryannoying’.
The probability density function of differences of successive scale factors shows thatfor 90% of the time there are only small changes in the range of plus or minus one scalefactor class. It is very difficult to detect such an error, which is limited to one sub-bandand to an amplification or attenuation of about 2 dB. Based on these statistical data ofscale factors, very simple error concealment can be applied. The disturbed scale factorsare replaced by previously correct decoded scale factors. This can be considered as aconcealment technique with no or only small impairments of quality.
3.8.5.5 Error Concealment by Plausibility Checks
The statistical properties of different information within one audio frame consisting of aDAB header, BAL, SCFSI, scale factors and sub-band data can be exploited for errordetection.
An analysis of the successive scale factors of each sub-band from the point of view ofstatistical properties of audio signals can give additional and more detailed informationon the reliability of the received scale factors. During an attack of the audio signal (e.g. apiano chord), scale factors may change greatly within a short time and may be followedby scale factor values which decrease slowly. During the decay of an audio signalcontinuously decreasing values of scale factors can be expected. This means that a highincrease followed by a high decrease is not plausible. Thus, the scale factor has to beindicated as non-reliable and has to be concealed by, for example, repetition or inter-polation. Compared to other possibilities of error protection and detection codes for thescale factors, this type of plausibility analysis does not need additional channel capacityand thus may lead to a similar evaluation of the error situation and performance.
In addition, the received scale factor values can be compared to the range of valuesexpected by the SCFSI. If the SCFSI indicates the transmission of three scale factorswithin one sub-band, a certain difference (depending on the encoder algorithm) betweenthe successive scale factors can be assumed. A more detailed investigation of theseinterdependencies might lead to a basis for a predictor model comparing receivedaudio data with predicted data and classifying the received audio data as more or lessreliable.
3.8.5.6 Subjective Assessment of the Error Performance of the DAB System
In 1994 and 1996, the Eureka 147 DAB project conducted tests to study the audibleimpairment of the DAB system at carrier-to-noise ratios approaching the failure point.Conventional subjective tests of the kind normally performed for this type of studywouldhave presented some problems, however. Such tests require many presentations of
Audio Services and Applications 153
![Page 184: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/184.jpg)
different conditions to each listener, for sufficient results to be obtained to providemeaningful graphical data for the various conditions to be tested. Furthermore, withRayleigh fading, the normal, short test sequences would not be appropriate at the highercarrier-to-noise ratios, because under these conditions the signal impairment results fromshort bursts of errors or muting distributed over relatively long periods of time. A newapproach to this kind of testing was therefore devised, in which the carrier-to-noise ratiowas adjusted at the input to the receiver to determine the point at which the effects of bit-errors first become noticeable (the ‘OoI, onset of impairment’) and the point at which thedisturbance or muting becomes so frequent that the programme is no longer of interest tothe listener, or where speech becomes unintelligible (the ‘PoF, point of failure’). The dataobtained from such tests is not suitable for graphical presentations (e.g. to show thesubjectively-assessed quality as a function of the carrier-to-noise ratio) but it does conveythe most useful indications of the error performance.
Test ConditionsA laboratory DAB chain was used commencing at the MPEG Audio Layer II encoderand ending at the output of a receiver, with a radio-frequency (RF) path simulationcapable of presenting an RF signal with a wide range of carrier-to-noise ratios at thereceiver input. Details may be found in [Gilchrist, 1994], [Lever, 1996], [Lever, 1997].
In the 1996 tests, a second DAB receiver was used to measure the bit-error ratio (BER)on a separate data channel in parallel with the receiver being used for the listening tests.This data channel had the same or a higher bit rate than the audio channel, and wasprotected with an equal error protection (EEP) profile at an equivalent code rate. Thismeasurement enabled to verify that the receivers were performing in accordance withexpectations at different values of carrier-to-noise ratio (C/N) in Gaussian and Rayleighchannels. Figure 3.28 shows the BER as a function of C/N for different code rates.
The audio test material selected for the tests comprised recordings of critical musicalitems, and of English speech items. The source of the programme items was the EBUSQAM Compact Disc [EBU, 1988]. In each test, the items were repeated until thelisteners had reached a decision. Significantly longer periods of listening were neededfor the tests involving a Rayleigh channel than for those involving a Gaussian channel.
The first tests were conducted with only a small range of bit rates and code rates, butwith stereo, joint stereo and mono coding. In the subsequent tests, a wide range of coderates was tested at one of the bit rates, and a range of bit rates at one code rate. The audiobit rates and average code rates selected for these later tests are shown in Table 3.6.
In the listening tests, the test subjects asked for the carrier-to-noise ratio to be adjustedwhilst they searched for the OoI and the PoF of the received DAB signal. The testconditions were chosen to ensure that audio services with sampling frequencies of48 kHz and 24 kHz were tested over a reasonable range of bit rates and, in the case ofthe 24 kHz-sampled service, with both equal and unequal error protection (EEP andUEP). Onset of impairment (OoI) as the point where three or four error-related eventscould be heard in a period of about 30 seconds. The failure point PoF was defined as thepoint where the error-related events occurred virtually continuously, and signal mutingtook place two or three times in a period of about 30 seconds. The carrier-to-noise ratios atthe OoI and at the PoF were found in the manner described, with a Gaussian channel (i.e.just with Gaussian noise added to the received signal) and with Rayleigh fading of the
154 Digital Audio Broadcasting
![Page 185: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/185.jpg)
received signal, simulated using the Grundig ‘FADICS’ (FADICS stands for FADIngChannel Simulator equipment [Zumkeller, 1994]). The tests with the Gaussian channelrepresented the conditions in which a static receiver operates, and the FADICS was usedto simulate two mobile reception conditions. One was reception in a vehicle moving at15 km/h (approximately 9.3 miles per hour) in an urban environment, and the other wasreception in a vehicle moving at 100 km/h (approximately 62 miles per hour) in a ruralenvironment.
Tests were conducted with simulatedRayleigh fading in the urban and rural conditionsdescribed above in Band III for transmission mode I, and in L-Band for mode II. In someof the tests with Rayleigh fading, it was found impossible to obtain error-free reception,even at high carrier-to-noise ratios. Under these circumstances, the onset of impairment
10−1
10−2
10−3
10−4
10−5
10−6
10−7
2 3 4 5 6 7 8 9 10 11 12
R = 3/8
R = 1/2
R = 3/4
R = 1/4
average carrier-to-noise ratio, dB
BER
Figure 3.28 Bit-error ratio measured in a data channel of the fourth generationDAB receiver, as afunction of the carrier-to-noise ratio
Audio Services and Applications 155
![Page 186: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/186.jpg)
could not be found, but where possible an approximate indication was obtained of thepoint at which the rate of occurrence of error-related events ceased to fall, as the carrier-to-noise ratio was increased from the failure point. This point was termed the ‘transitionpoint’ because a transition occurred from a carrier-to-noise ratio dependent impairmentcondition to a static condition where a steady residual (or ‘background’) error rate wasevident. This was used in place of the onset of impairment.
Test Results and ConclusionsThe listeners in both series of tests had similar experiences concerning the precision withwhich the onset of impairment (OoI) and the point of failure (PoF) could be determinedsubjectively. There is typically an uncertainty of about 0.5 dB in determining the failurepoint. When determining the onset of impairment (or the transition point, where therewas a residual error rate even at high carrier-to-noise ratios) the less critical programmeitems (speech) tended to mask the error-related impairments to some degree, typicallyintroducing an uncertainty of about 0.5 dB. This latter phenomenon appears to beparticularly noticeable under rural Rayleigh fading conditions with mode II transmis-sions at L-Band. However, there was an uncertainty of about +/–1.0 dB in determiningthe mean carrier-to-noise ratio for the tests with simulated Rayleigh fading.
Comparing the results for the DAB signal with added Gaussian noise, in mode I andmode II at the bit rates and code rates common to both sets of tests showed that any
Table 3.6 Conditions used in the 1996 error-performance tests
Bit rate Sampling Frequency Mode UEP/EEP Code Rate Protection[kbps] [kHz] Level
1 256 48 Stereo UEP 0.50 32 224 48 Joint stereo UEP 0.35 13 224 48 Joint stereo UEP 0.40 2
4 224 48 Joint stereo UEP 0.50 35 224 48 Joint stereo UEP 0.60 46 224 48 Joint stereo UEP 0.72 5
7 192 48 Joint stereo UEP 0.51 38 160 48 Joint stereo UEP 0.51 39 64 48 Mono UEP 0.50 3
10 64 24 Mono UEP 0.50 311 64 24 Joint stereo UEP 0.50 312 56 24 Mono UEP 0.50 313 56 24 Mono UEP 0.60 4
14 40 24 Mono EEP 0.25 115 40 24 Mono EEP 0.38 216 40 24 Mono EEP 0.50 3
17 40 24 Mono EEP 0.75 418 32 24 Mono UEP 0.50 319 24 24 Mono EEP 0.38 2
20 16 24 Mono EEP 0.38 2
156 Digital Audio Broadcasting
![Page 187: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/187.jpg)
differences were very small, usually only 0.5 dB. As the differences were comparable withthe expected error in determining the carrier-to-noise ratio at the OoI and PoF, they areprobably not significant.
As would be expected, the error performance improved as the code rate was reduced.Figure 3.29 shows the relationship between the carrier-to-noise ratio at the OoI and thePoF as a function of the code rate for a Gaussian channel using transmission mode II.When subject to Rayleigh fading, the DAB receiver needed a consistently higher meancarrier-to-noise ratio. Rural Rayleigh fading conditions (simulating the reception in afaster-moving vehicle) required higher carrier-to-noise ratios than urban conditions.
The results showed that the bit rate and whether the audio is coded as mono, stereo orjoint stereo have little, if any, effect upon the performance of the receiver at low carrier-to-noise ratios. They showed, too, that reducing the audio sampling frequency from 48kHz to 24 kHz has no significant effect upon performance.
The use of equal or unequal error protection (EEP or UEP) is determined by the bitrate of the service. The results of the tests showed that UEP gives an improvement inreceiver performance at the point of failure equivalent to between 1.0 and 3.5 dB in thecarrier-to-noise ratio, at a code rate of 0.5. The greatest benefit is obtained underRayleigh fading conditions. No significant effect was observed upon the onset of impair-ment when the type of error protection was changed. Thus one effect of changing fromUEP to EEP is to bring the failure point closer to the onset of impairment.
Gaussian channelmode II, 224 kbpsjoint stereo coding
2
4
6
8
10
12
0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1
Code rate
Carrier-to-noise ratio, dB
Onset of impairment (OoI)
Point of failure (PoF)
Figure 3.29 Carrier-to-noise ratio at the onset of impairment (OoI) and at the point of failure(PoF), as a function of the code rate
Audio Services and Applications 157
![Page 188: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/188.jpg)
No significant differences were found in performance when comparing mode I BandIII transmission and mode II L-band transmission.
3.8.6 Objective Quality Assessment
Formal listening tests are very time consuming and expensive. The preparation of testmaterial, the training, listening and statistical analysis require a great deal of effort andexperience. Conducting such a test requires expertise and resources that are often beyondthose available in an organisation that needs to monitor quality during ongoing opera-tions or verify codecs for specific applications. Test results obtained from one imple-mentation of a codec cannot be applied safely to another implementation. Thismotivated the ITU to develop an objective test methodology called PerceptualEvaluation of Audio Quality (PEAQ), see ITU-R recommendation [BS.1387]. The goalwas to formalise and automate the lengthy subjective procedures into a tool and meth-odology that encompasses the experience and knowledge from numerous listening testsand today’s understanding of the human auditory system into a toolset that can beapplied quickly.
The method is not aimed at replacing formal listening tests, but rather to approximatethe results of these. Its output is an estimate for the basic audio quality, as it would havebeen determined by a subjective listening test. The toolset provides an excellent means tomonitor codecs in an operational environment and to perform comparisons betweendifferent implementations of a coding scheme. Developers can use it to assess modifica-tions of a coding algorithm quickly.
An expert listener is trained to identify various artifacts of a codec. Since each newcodec is likely to produce new artifacts, it is essential to realise that a tool that has notbeen trained for these particular artifacts may not be able to recognise and score themappropriately.
3.8.6.1 Test Methodology
The test method requires the reference (i.e. the original, unprocessed signal) and thecoded signal as inputs. It evaluates all differences between the two and scores themaccording to psycho-acoustic criteria. The individual differences are combined to forman estimate of the subjective difference grade, called the objective difference grade(ODG). The data flow through the analysis system is presented in Figure 3.30.
The first step in this process is to transform the input signals to representations of theexcitation pattern along the basilar membrane, by means of an FFT with subsequentmorphing to a pitch scale and in parallel by means of a filterbank with level dependentfilters. The excitation patterns are then corrected for the absolute hearing threshold and aspreading function is applied that represents some of the masking effects. The resultingexcitation patterns are then used to derive several intermediate measures, such as thenoise to mask ratio, linear distortions, differences in bandwidth, differences in modula-tion and the actual masking curves. Standard values for the just noticeable differences arethen used to determine a detection probability of each individual difference foundbetween the reference and coded signal.
158 Digital Audio Broadcasting
![Page 189: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/189.jpg)
The different measures are combined into an estimate of the subjective difference gradeby a neural network, since their relationship is very complicated and not easily modeled.This network has been trained and verified with the results of several listening tests, someof which were conducted prior to the development of this ITU recommendation, someduring the development. The network approximates the judgement of the individualdifferences as an average expert listener would.
The PEAQ methodology does not include a statistical component. The output is asingle number for the mean difference grade. No attempt is made to determine the sizeand potential overlap of confidence intervals. As we have seen during the discussion ofthe subjective listening test, the confidence intervals often say as much about a compar-ison between codecs as do the mean values. Here this information is lost and one can onlyhope that the method provides amonotonous relationship between perceived quality andODG. In the following we will see that this is not necessarily so.
3.8.6.2 Comparison between Objective and Subjective Assessment
The training of the neural network for PEAQ was performed with the utmost care. Ofnecessity a balance had to be struck between the number and severity of outliers (in thisframework of statistical analysis, outlier means a measured value which lies significantly
Peripheral Ear ModelFFT Based
Peripheral Ear ModelFilterbank Based
Preprocessing of Excitation Pattern Preprocessing of Excitation Pattern
Calculate Model Output Values
Calculate Quality Measure (Neural Network)
Signal under TestReference Signal
Playback Level
Objective Difference GradeDistortion Index
Excitation Patterns, Specific LoudnessPatterns, Modulation Patterns
Excitation Patterns, Specific LoudnessPatterns, Modulation Patterns, Error Signal
Figure 3.30 Data Flow in PEAQ Analysis [BS.1387]
Audio Services and Applications 159
![Page 190: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/190.jpg)
outside of a given tolerance field), the accuracy of the individual listening test result interms of the size of the confidence interval and the bias towards overestimating theseverity of impairments. Two versions of the system were developed, with differentcomplexity. The basic version has a large number of output variables, so the use of theadvanced version is recommended for all applications.
Figure 3.31 depicts the outcome of the verification tests of the advanced model,comparing the subjective (SDG) and objective difference grades (ODG) of differentprogramme items. Each of the plotted dots stands for an individual test item. The solid(grey) lines depict the tolerance scheme that was used during the model training process.The relative differences between the ODG and the SDG partly are fairly large. One caneasily see that an individual item can be misjudged by as much as two difference grades –a so called outlier.
Studies have shown that a much better correlation can be achieved if ODGs areaveraged across a large number of items. In this case the absolute error is always smallerthan 0.5 difference grades. The drawback of averaging over several items is that theinsight into worst case and best case performance of the codec is lost. A codec developerhas to be very critical of the outcome of each individual item. For online monitoring andassessment of the validity of an installation, the averaging method may be very wellsuited.
The ITU recommendation [BS.1387] has been developed to facilitate the rapid evalua-tion of systems that include perceptual audio codecs and as an aid to developers andparties performing listening tests. It fully achieves these goals. It should not, however, beused as the sole method to determine which of two codecs is better suited for a particularapplication or standard. The final word in quality assessment remains with a subjectivelistening test, conducted according to the ITU recommendation [BS.1116].
3.9 Audio Levels
3.9.1 Audio Signal Level Alignment
Careful control of the audio level is very important in both the analogue and the digitalenvironment. In the analogue environment, noise and distortion limit the capability of
−4
−3
−2
−1
0
−4.0 −3.0 −2.0 −1.0 0.0ODG
SD
G
Figure 3.31 PEAQ: Advanced model output versus listening tests [Thiede, 2000]
160 Digital Audio Broadcasting
![Page 191: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/191.jpg)
the system to accommodate signals with a wide dynamic range. In the digital environ-ment, the system can be designed to accommodate signals with a wide dynamic range, butit is essential to avoid the hard ‘clipping’ of programme signal peaks which occurs whenthe signal level is too high. However, there can be problems other than those directlyconcerned with dynamic range. For example, different approaches to controlling levelsmay cause problems with the alignment of connections during the exchange of pro-grammes between broadcasters.
The capability of handling signals with a wider dynamic range does not necessarilysolve all the problems of programme level adjustment, see also [Gilchrist, 1998].
3.9.1.1 Programme Signal Metering and Control
In the past, broadcasters have used either the so-called Volume Unit (VU) meter or thePeak Programme Meter (PPM) to measure and set programme levels [IEC 60268],[BS.645]. The VU meter is a rectifier voltmeter with a rather long integration time (200ms) which indicates approximately the average value of the voltage. It does not respondto short peaks in the programme. The PPM is a quasi-peak meter, with a rapid responseto increasing level (the integration time is typically 10 or 5 ms respectively, dependingupon the particular model) but the peak readings decay slowly. It gives a much betterindication of the programme peaks than the VUmeter, and the slow decay characteristicmakes it easier for operators to observe the programme peaks.
There are a number of versions of the PPM, all having substantially the same ballisticcharacteristics, but with differences in the markings on the scale. Figure 3.32 displays theindications produced by various types of programme meters with the ITU-R recom-mended test signals.
measurementlevel, ML
alignmentlevel, AL
permittedmaximumlevel, PML
digitalcoding limit(EBU R68,
SMPTE RP200)
VU meter(Australia, NorthAmerica etc)
IECtype 1
IECtype 1
IECtype 1
PPM(FRG)(OIRT)
PPM(BBC)
PPM(EBU)
VU meter(France)
−5 dB 5 dB−20 dB 0 dB−10 dB
(−9)721 6543
1284−4−8−12 test
−20
(−12)
3210−2−4−6−8−10
3210−6 −2−4−810−20
decibels
Figure 3.32 Programme level metering, according to [BS.645]
Audio Services and Applications 161
![Page 192: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/192.jpg)
Most analogue systems do not introduce really ‘hard’ clipping when overloaded, andthe onset of distortion is usually gradual. This means that the occasional gentle clippingof short-duration signal peaks normally does not produce unacceptable distortion.Nevertheless, broadcasters will generally arrange for some ‘headroom’ between thehighest level indicated by the meter and the overload point of the transmitter, or providea protective limiter, or similar device, to ‘catch’ the highest signal peaks and reducetheir level.
Electronic level meters (so-called true peak programme meters with a very shortintegration time < 0.1 ms) have been available for a number of years. They have thecapability of capturing and displaying accurately the level of even the briefest of signalpeaks.
Any modification of programme peaks by a limiter may introduce distortion, or‘pumping’, and the degree of annoyance depends upon the extent to which thepeaks are modified. Some broadcasters, particularly those operating popular musicstations, intentionally drive the limiters sufficiently hard to invoke the compressionof all but the lowest signal peaks. This type of processing is used in order toproduce a programme which sounds loud to the listener, possibly with the intentionof sounding as loud as, or louder than, rival radio stations which may be competingfor the attention of the listener.
3.9.1.2 Level Profile
The level profile of an audio transmission channel shows how the different levels ofprogramme and test signals are located in the range between the upper system limit level(i.e. the clipping level in a digital domain, designed with 0 dBFS=0 dB ‘Full Scale’), andthe noise signal level.
Figure 3.33 shows the principal level profile of a transmission channel. For broad-casting systems (recording, distribution, emission) a set of audio test levels is defined bythe Recommendations ITU-R [BS.645] and EBU [R68].
The EBU recommends that the ‘Permitted Maximum Signal level’ LPMS is set to 9 dBbelow the digital clipping level (Full scale). The intention is that, with 9 dB headroom,programme signals controlled using quasi-peak meters with an integration time of 10 mswill not be clipped, even if they contain transients with a very short duration. If true peakreading meters are used, they will give higher peak readings than the PPM on someprogrammematerial, whereas VUmeters will typically under-read relative to the PPM asthey have a long integration time.
In broadcasting and some studio recording operations, where programme interchangecompatibility is of primary importance, it is normal to work to international standardguidelines that define an ‘Alignment Signal level’, LAS, for alignment of the recordingequipment or the transmission lines, respectively. ITU and EBU recommendations,among others, specify a digital alignment signal level of –18 dBFS, whereas SMPTErecommendations [RP200] specify a level of –20 dBFS. Both are likely to be encounteredin operational practice, and it is therefore important to indicate clearly which alignmentlevel is adopted, in order to avoid subsequent confusion and possible mis-alignment oflevels.
162 Digital Audio Broadcasting
![Page 193: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/193.jpg)
In situations where the alignment signal recommended by the ITU-R [BS.645] andEBU [R68] at �18 dBFS is used, the indications given by the various meters are asshown in Figure 3.32. In situations where the SMPTE reference level [RP 200] at�20 dBFS is used for alignment, the various types of PPM indicate a level 2 dB lowerthan with the alignment signal recommended by the ITU-R and the EBU, correspond-ing to ‘-11 dB’ (FRG/OIRT) ‘31/2’ (BBC) and ‘�2 dB’ (EBU). The VU meter indica-tions would be 2dB lower, too, being either ‘�2’ (Australia, North America, etc.) or ‘0’(France) but the recommendations of the SMPTE imply a change from the situationshown in Figure 3.32.
In countries such as North America, where the VU meter is ubiquitous, the use of theSMPTERecommended Practice [RP200] to align and control signal levels prior to digitalcoding corresponds to the practice shown as ‘VUmeter (France)’ in Figure 3.32, with theSMPTE reference signal causing the meter to read ‘0 VU’. Thus, when programmes areexchanged in digital form between organisations using PPM and VU metering in accor-dance with the SMPTE Recommended Practice, the relative responses of the metersshown in Figure 3.32 should remain valid with the exception of the upper VUmeter scale(i.e. the scale labelled ‘VU meter (Australia, North America, etc.)’). Under these circum-stances this particular scale is no longer valid, or necessary, and should be disregarded.The remaining VU meter scale in Figure 3.32 (labeled ‘VU meter (France)’ in the
Digital clipping level (0 dBFS)
Noise level
Footroom
Headroom
dBrel
Minimum programme signal level(not defined)
LPMS
LAS
LMS
0
−9(−10)
−21
Permitted Maximum Signal level
Alignment Signal level
Measurement Signal level
Pro
gram
me
dyna
mic
Cod
ing
rang
e
Figure 3.33 Principal level profile of a digital audio broadcast transmission channel
Audio Services and Applications 163
![Page 194: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/194.jpg)
diagram) applies to all VU meters during the digital exchange of programmes accordingto the SMPTE Recommended Practice.
A lower signal level, theMeasurement Signal level (LMS) is defined at –21 dB relative toLPMS, for measurement purposes only (for instance measurement of the frequencyresponse). This level has no significance for operational purposes.
3.9.1.3 Programme Levels and Level Alignment in Digital Broadcasting
Digital techniques offer the broadcaster the ability to handle audio signals with aconsiderably wider dynamic range than that accommodated by analogue techniques.Digital audio systems are characterised by noise and distortion levels which are deter-mined principally by the design of the system (i.e. the resolution of the analogue-to-digital converters (ADCs) and any bit rate reduction techniques which may beemployed), and by ‘hard’ clipping when the amplitude of the analogue audio signal issufficient to drive the ADC beyond the limit of its coding range.
With a sufficiently high digital resolution (i. e. 16 bits/sample for CD recording, but upto 24 bits/sample for applications using an AES/EBU interface) connections for con-tribution, distribution and exchange can be implemented which provide a high signal-to-noise ratio and the capability to handle programme material with a wide dynamic range.The same is true for broadcast emission.
The application of bit rate reduction inevitably affects the noise levels, but practicaldigital radio services depend upon this for their existence, and today’s advanced bit ratereduction techniques such as MPEG-1/2 Audio Layer II used for DAB have little or noeffect upon the perceived audio quality provided the audio signal is afforded sufficient bitrate [BS.1115].
The metering and control of audio signals should therefore conform to the recom-mendations of the EBU [R68] and ITU-R [BS.645], or SMPTE [RP 200], as appropriate,in particular with regard to the provision of sufficient headroom for transient signalpeaks which exceed the permitted maximum signal level.
3.9.2 Programme Loudness
Broadcasters have to handle a wide variety of audio programme material for both radioand television. Some of it has a very wide dynamic range (e.g. orchestral and choralmusic, film sound tracks) and some has a relatively narrow dynamic range (e.g. talks,interviews andmusic which has been subjected to a high degree of dynamic compression).The normal practice for analogue broadcasting has been for many years to control theaudio signal so that the highest peaks just approach 100 per cent modulation. Trainedoperators use programme level meters to align levels in the broadcasting chain andcontrol signal peaks, insofar as their own and the meters’ performance enables them todo this. Usually, limiters are provided to prevent over-modulation of the transmitters.The intention is to maximise the signal-to-noise ratio and thereby the coverage of thetransmitters.
One result of using this approach to audio level control is to set the mean programmelevel, and consequently the loudness, of programmes with a relatively narrow dynamic
164 Digital Audio Broadcasting
![Page 195: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/195.jpg)
range significantly higher than that of orchestral and choral music. Thus broadcasts ofoperas, and choral and orchestral concerts, tend to sound much quieter than ‘pop’ musicand chat shows, for example.
As already mentioned, some broadcasters drive their limiters hard in order to maketheir programmes sound as loud as possible, in the belief that listeners are attracted to theradio stations which sound the loudest.
However, listeners are becoming increasingly aware of audio quality issues, and inconsequence less tolerant of distortion and changes in the perceived loudness of audioprogramme material. Loudness changes can cause discomfort to the listener, and mostfrequently occur when the listener switches from one broadcaster’s channel to another, orwhen listening to a sequence of different types of programme from one broadcaster.Advertising material is frequently blamed, with some justification, for being presented atan uncomfortably loud level.
In a digital broadcasting system, no benefit to the coverage results from consistentlyhigh modulation levels. Furthermore, the system should be capable of handling materialwith a wide dynamic range. This means that dynamic range compression is unnecessary,unless the broadcaster requires it to produce a particular type of sound or the listenerrequires it (e.g. for listening in a noisy environment). In the former case, the broadcastershould apply the compression, but ensure that the mean programme level is not raised inconsequence. In the latter case, the listener should use the dynamic range control signalprovided in the PAD (programme associated data) in conjunctionwith the facilities in thereceiver, see section 3.5.
A number of meters have been developed specifically for the purpose of monitoring theloudness of audio programme material, such as [Hoeg, 1996], [Emmett, 1994]. However,the removal of annoying loudness variations will depend upon changes to somebroadcasters’ current (at the time of writing) practices and their adoption of newstandards. Progress towards this end has been made in the ITU-R with the publicationof Recommendations for algorithms [BS.1770] and meters [BS.1771] for indicatingloudness and true-peak audio level.
ITU-R [BS.1771] defines requirements for a meter that can perform measurement ofloudness according to [BS.1770] by weighting with a modified Leq-scale (Long termrms-equivalent measure), and optionally indicate true digital peaks, too. The testedweighting Leq(RLB) uses a high-pass frequency weighting curve referred to as the revisedlow-frequency B-curve (RLB or RL2B). A new unit is introduced, known as LU(Loudness Unit) which is related to a dB-scale in such a way that a fall in level of 10dB results in a reduction of 10 on the LU-scale.
The EBU has formed a Project group (P/LOUD) to draw up guidelines for the use ofthe ITU-R recommended metering either in combination with, or in place of, peakprogramme meters.
Audio Services and Applications 165
![Page 196: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/196.jpg)
4
Data Services and Applications
4.1 General
While DAB early development mainly focused on audio broadcast, data capabilities havebeen designed into the system right from the beginning. After successful presentations ofthe new digital audio broadcast system at the beginning of the 1990s, these data cap-abilities gained more and more interest and prototype data applications were demon-strated by different project partners of Eureka 147 at related events (e.g. at NAB in LasVegas, Spring 1992). In order to harmonise these prototype data applications and toreach compatibility between the equipment and services, data interfaces, protocols andapplications were defined to match the needs of broadcasters, service providers and endusers. In the meantime it is generally accepted that the usage of some DAB channelcapacity, especially for multimedia data applications, is crucial both for user acceptanceand for financing of the networks of this new digital broadcast medium. All the necessaryhooks are available to follow this route.
4.2 Data Application Signalling and Access
A DAB multiplex can carry audio and multimedia data. In order to present multimediadata to the user, a special software is needed on the receiver side. Such software is usuallycalled application software. The data application software is therefore the special piece ofsoftware needed on receiver side to present a specific type of data carried via DAB.Standards define how data is structured, transported and how it should be presented onreceiver side. For example, the Dynamic Label specification within [EN 300401] indicateshow short textual information related to the audio can be carried. If a data application isnot defined in [EN 300401], then it is called a user application.
If we say that a specific data application is broadcast, we mean that data according to aspecific data application specification is broadcast and that it can be presented by anapplication software complying to the specific data application specification.
Digital Audio Broadcasting: Principles and Applications of DAB, DAB+ and DMB, Third Edition Edited by W. Hoeg and T. Lauterbach© 2009 John Wiley & Sons, Ltd. ISBN: 978-0-470-51037-7
![Page 197: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/197.jpg)
The DAB multiplex is organised into services and service components (see section2.3.6). Services and service components are logical components the user can select. If aservice component is presented to the user, then data from a specific data channel isfed to a specific decoder. The DAB signalling indicates where the data is transported(this depends on the type of service component) and how the data is decoded, i.e., towhich data application specification the decoder must comply. Data applications canbe carried as a data service component in a packet mode sub-channel, in a streammode sub-channel or in the FIDC. In addition, data applications can also be carried inthe PAD channel of an audio service component (see 2.3.3.3). Similar to a packetmode sub-channel, a PAD channel may carry data for multiple applications inparallel. But whereas a single packet mode sub-channel may contain several dataservice components (one per data application), in DAB terminology the entire audioservice component including everything contained in its PAD channel is still consid-ered one single audio service component. There are no data service components insidea PAD channel.
DAB services consist of at least one service component. The type of the first servicecomponent, the so called primary service component, determines the type of the service.If the primary service component is an audio service component, then the service is calledan audio service. If the primary service component is a data service component, then theservice is called a data service. Both audio and data services may have additional (socalled secondary) audio and/or data service components.
ADAB service forms an integrated whole of one or multiple service components. If theuser selects a service, then all its service components should be presented to the user.Presentation starts with the primary service component. If the service has additionalservice components or data applications, then they should automatically be presented aswell, provided they do not compete for the same output device. Data applications in thePAD channel of an audio service component must only be presented if the audio servicecomponent is also presented.
For example: an audio service comprises one primary audio service component, onesecondary audio service component and one secondary data service component. Bothaudio service components carry Dynamic Labels and an MOT Slideshow. The dataservice component is an MOT Broadcast Web Site.
If the user selects this service on a portable device with a colour screen, then thedevice first determines the primary service component. The primary audio servicecomponent is then decoded and put out via the loudspeakers. Since the audio servicecomponent also carries Dynamic Labels and an MOT Slideshow, both will be auto-matically presented on the screen of the device. Neither the secondary audio servicecomponent nor the secondary data service component can be presented in addition,because they compete for loudspeakers/screen which are already in use by the primaryservice component and its data applications. A special button may permit the user toswitch to the secondary audio service component. In this case its data applications willalso replace those of the primary audio service component. The user will also be ableto replace the Dynamic Labels/MOT Slideshow by the MOT Broadcast Web Site ofthe secondary data service component. However, the user will not be able to select thedata applications of the secondary audio service component while listening to theprimary audio service component or vice versa.
168 Digital Audio Broadcasting
![Page 198: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/198.jpg)
The example shows that the closest relation of an audio service component and adata application is among the audio service component and all data applicationstraveling in its PAD channel. If the audio service component is selected, then its dataapplications are implicitly selected as well. Additional data service components of thesame service will only be automatically selected, if they do not compete for the sameoutput device.
The labels provided by FIG type 1 and FIG type 2 support the user whenselecting services, service components and/or data applications traveling in a PADchannel.
Any receiver that supports a certain user applicationmust be able to extract it from anydata channel that supports this user application. For instance a service provider mightchoose to carry a Slideshow in the PAD channel of the primary audio service componentor as a secondary data service component in a packet mode sub-channel. The latter isuseful if this service component is shared by several services.
It should be noted that while DAB permits very complex combinations of servicesand service components, at the moment most real-life services consist of one single(primary) service component. In case of audio service components, usually at leastDynamic Labels are provided in the PAD channel. In the future, more data applica-tions are expected both inside the PAD channel as well as in secondary data servicecomponents.
The basic configuration information about data service components is part of theMultiplex Configuration Information (MCI, see section 2.3.6) sent in the FastInformation Channel (FIC). In contrast to audio service components, which are alwayssent in stream mode and coded according to the DAB audio coding schemes based onMPEG Audio Layer II or as DAB+, there are many possible coding formats andtransport mechanisms for data service components. To enable the receiver to decodethe service components, it is necessary to signal precisely which transport protocol is usedand what presentation engine is required. ‘User application’ standards (such as theMOTSlideshow, Journaline or the Electronic Programme Guide standard) define the softwareneeded to decode and present the data carried by the data service component. The list ofall DAB user applications is provided in [TS 101756]. Several FIGs are used to identifythe broadcast user applications and their data channels.
FIG 0/2 signals the Service Identifier (SId) of the service (see section 2.5.3) and lists allservice components of the service. For audio and data service components carried in astream mode sub-channel, FIG 0/2 indicates the sub-channel; for data service compo-nents carried in the FIDC (Fast Information Data Channel), the FIDCId(Fast Information Data Channel Identifier) is provided. In both cases this informationis sufficient to extract the application data from the DAB data channel. In case of a dataservice component carried in a packet mode sub-channel, it is necessary to specify sub-channel and packet address. Since FIG 0/2 is unable to carry these two parameters, anadditional FIG 0/3 is used per data service component to provide them. Each data servicecomponent has an associatedData Service Component Type (DSCTy). This parameter issignalled in FIG 0/3 for service components carried in a packet mode sub-channel, and inFIG 0/2 for service components carried in a stream mode sub-channel or the FIDC. Inearlier revisions of the DAB standard, this parameter identified the type of the dataservice component, e.g., Traffic Massage Channel or emergency warning system. Today
Data Services and Applications 169
![Page 199: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/199.jpg)
this parameter is usually used to define the transport protocol used by the servicecomponent, e.g., MPEG Transport Stream, Transparent Data Channel (TDC) orembedded IP packets. One entry in this table refers to the Multimedia Object TransferProtocol (MOT) used by many DAB data applications.
The most important information regarding data applications is the user applicationinformation provided in FIG type 0 Extension 13. This mandatory parameter tells thereceiver which application software is needed to decode and present the broadcast data.In case of user applications carried in the PAD channel of an audio service component,FIG 0/13 also specifies DSCTy and other transport related parameters; data servicecomponents use the same parameters, but encoded in FIG 0/2 or FIG 0/3. The PADchannel permits to carry multiple applications in parallel and therefore a parameter‘X-PAD AppType’ is used to separate the applications streams. The ‘X-PADAppType’ in a PAD channel thus has similar functionality as the packet address in apacket mode sub-channel.
Legacy PAD decoders will assume that an MOT Slideshow or MOT Broadcast WebSite always uses AppTypes 12 and 13 (and in addition AppTypes 14/15 for scrambledsegments and conditional access (CA) messages). Therefore AppTypes 12 to 15 must notbe used for other user applications.
4.3 The Multimedia Object Transfer Protocol
4.3.1 General Principles
TheMultimediaObject Transfer (MOT) Protocol [EN 301234] is a transport protocol forthe transmission of multimedia content in DAB data channels to various receiver typeswith multimedia capabilities. It is the common transport mechanism for transmittinginformation via different DAB data channels (PAD, packet mode) to unify access tomultimedia content within the DAB system. MOT ensures interoperability betweendifferent data applications, different receiver device types as well as for equipmentfrom different manufacturers. A basic support for multimedia presentations is alsoprovided.
4.3.2 Structure of MOT
All information is conveyed from the information source to the destination as ‘MOTobjects’ of finite length. The maximum object length that can be signalled is about 255Mbytes. No constraints are applied on the content that can be transmitted. An exampleof such a content is an MP3 file or an image file.
Each object consists of ‘header information’ and ‘body’. The object body contains thepayload data to be transported, for example an HTML file. The header informationcarries all meta data of the object. The meta data consists of two types of parameters.MOT parameters are used to identify the object and to support reassembly, decompres-sion/descrambling, and cache management in the MOT decoder. User application spe-cific parameters provide additional information to the user application decoder onreceiver side.
170 Digital Audio Broadcasting
![Page 200: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/200.jpg)
Transport of the header information of an MOT object depends on the MOT mode.MOT provides two modes:
• In ‘MOT header mode’, a sequence of MOT objects is broadcast. The next object canonly be transmitted after the transmission of the current object is completed. TheMOTdecoder forwards every received MOT objects to the user application decoder.
• In ‘MOT directory mode’ a set of MOT objects is broadcast. The MOT directorydescribes all objects that belong to the current set of objects. MOT directory andbodies are broadcast in parallel. The MOT decoder manages the received set of filesand handles cache management and object expiration.
In MOT header mode, the header information describing the current object is carried asthe MOT entity ‘MOT header’.
InMOT directory mode, the header information of all objects within the current set ofobjects is combined. Together with parameters within the MOT directory (MOT direc-tory parameters) that apply to the whole set of objects, all header information of allobjects is carried as the MOT entity ‘MOT directory’.
There are five different types of MOT entities:
• MOT header (MOT header mode only);• MOT body (unscrambled);• MOT body (scrambled on MOT level);• MOT directory (MOT directory mode only); and• compressed MOT directory (MOT directory mode only).
During transport an MOT entity is split into segments. The type of MOT entity issignalled in the data group type field of the MSC data groups carrying MOT segments.
The user application defines which MOT mode is used and which MOT parametersand user application specific parameters are carried in the header information of anobject. If MOT directory mode is used, then additional parameters referring to the wholeset of objects may be used within the MOT directory.
It should be noted that the MOT header mode does not restrict the user application toone single object. In MOT header mode, the MOT decoder only manages one singleobject at any time. But it is possible to have a user application where several objectsprovided one after the other by the MOT decoder are managed by the user applicationdecoder. An example is data applications that collect data received via MOT headermode, for instance a sequence of podcasts. The more podcasts have been received, thebigger the database gets on receiver side. In this case a user application specific manage-ment of the received objects is applied.
4.3.3 Transmission of MOT and Overhead Considerations
For transmission the MOT object is split into several segments and then mapped topackets (for transport in a packet mode sub-channel) or X-PAD data sub-fields (fortransport in a PAD channel). Details are provided in [EN 301234].
Data Services and Applications 171
![Page 201: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/201.jpg)
When choosing the segment size for an entity, several factors have to be taken intoaccount:
• The smaller the segment size, the less data is lost in case of a reception error. Note thatthis only makes a difference if entities are repeated. If an entity is broadcast withoutany repetitions, then large segments may be used. Since any segment lost due to areception error will cause the loss of the entire MOT object anyway, it does not matterhow big the lost segments are.
• If the enhanced packet mode with additional error protection (see section 2.3.3.5) isused, then the error probability is strongly reduced. In this case, larger segments maybe used.
• The smaller the segment size, the higher the segmentation overhead. Each segment hasan overhead of usually 11 bytes; 2 bytes for the segmentation header, 9 bytes for MSCdata group header and MSC data group CRC.
• Additional overhead is caused by the lower layers of the protocol stack. IfMOT is usedin a packet mode sub-channel, then an MSC data group carrying the MOT segmentwill be mapped to a sequence of packets. Unused (padding) bytes in the last packetincrease the overhead. This overhead can be reduced by using large segments and/or bychoosing segment sizes that require no padding on packet level.
• Since the number of segments per MOT entity is limited to 32 768, the segment sizemight have to be increased for very large entities.
To minimise the total transport overhead, it is necessary to analyse the total overhead.Figure 4.1 shows the overhead on various protocol levels in a packet mode sub-channel.Overhead is for instance caused by the mapping of MOT segments to MSC data groups.This segmentation overhead depends on the size of the segment. Since the segmentationoverhead is a fixed number of bytes, it can simply be reduced by increasing the segment size.For a segment size of around 1 kbytes, the relative segmentation overhead is around 1%.
MOT entity
MOT segment MOT segment MOT segment · · ·
MOT segment CRCDG-Hdr
P-Hdr Payload CRC · · · P-Hdr CRC
Overhead by encapsulation
MOT entity level
MOT segment level
Data group level
Packet level
Padding overhead
Payload
Figure 4.1 Transport overhead of an MOT entity carried in a packet mode sub-channel
172 Digital Audio Broadcasting
![Page 202: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/202.jpg)
If MOT is used inside a packet mode sub-channel, then the overhead caused by themapping of MSC data groups (containing the MOT segments) to packets is much moresignificant. There are two types of overhead. Overhead caused by packet headers/packetCRCs and overhead caused by padding. DAB provides four different packet sizes (24, 48,72, 96 bytes) and requires an integral number of packets per logical frame (i.e., each24ms). This means that, depending on the sub-channel bit-rate, it is not always possibleto use packets of 96 packets that would cause the lowest possible overhead. Each packethas a fixed overhead of 5 bytes for packet header and packet CRC.
The following examples illustrate this:
Example 4.2: A packet mode sub-channel of 8 kbps permits only packets of 24 byteseach. The relative overhead is 5 bytes per 19 bytes net, i.e., 26%.
Example 4.3: A packet mode sub-channel of 56 kbps requires at least two packets perlogical frame, one 96 byte packet and one 72 byte packets. In this case the relativeoverhead is 10 bytes per 158 bytes net, i.e., 6.3%. All other possible combinations ofpacket sizes have a higher overhead.
Example 4.4: Apacket mode sub-channel of 64 kbps requires at least two 96 byte packetsper logical frame. In this case the relative overhead is 10 bytes per 182 bytes net,i.e., 5.5%. All other possible combinations of packet sizes have a higher overhead.
The examples show that the relative overhead on packet level can be quite high. Theoverhead is highest for small sub-channel bit-rates and lowest for sub-channels whosebit-rate is a multiple of 32 kbps. It can also be seen that it is bitrate-efficient to combinepacket-mode sub-channels with low bit-rate to one larger sub-channel. In example 4.2, therelative overhead is more than 4 times higher than in example 4.4. The lowest overheadshows example 4.4 whose bit-rate is the sum of the bit-rates in example 4.2 and 4.3. Whiletechnically the combination of packet-mode sub-channels is beneficial, there might bepolitical reasons against it or the resulting bit-rate might get too high for some types ofreceivers. If the bit-rate of the packet mode sub-channel is a multiple of 32 kbps and eachMSC data group is transported without any interleaving on packet mode level, then mostof the packets that carry an MOT segment will have the lowest possible overhead. At thebeginning and at the end of the MSC data group, smaller packets might have to be used,thus slightly increasing the total overhead. One reason for such smaller packets than theoptimum (maximum) packet size is padding. Padding is needed, if the gross size of theMOT segment (i.e., including MSC data group overhead and segmentation overhead)does not completely fill the last packet used to carry the MOT segment. Therefore theencoder should try to use segment sizes that require little or no padding. If, for instance,MOT segments of 1024 bytes are used and the last packet is a 24 byte packet that is onlyhalf full, then the relative overhead caused by this padding is 1%.
If MOT is used inside a PAD channel of an audio service component, then the over-head caused by the mapping of MSC data groups (carrying the MOT segments) toX-PAD data sub-fields is much lower than the overhead caused by a packet mode sub-channel. On the other hand, the error protection for PAD in Audio Layer II is usuallyworse.
Data Services and Applications 173
![Page 203: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/203.jpg)
Looking at the overhead caused by various protocol levels, segment sizes of around1 kbyte seem useful. If MOT is used inside a packet mode sub-channel, then it isrecommended to use a sub-channel bit-rate that is a multiple of 32 kbps and a segmentsize that requires no padding on packet level. The enhanced packet mode permits to usesegment sizes of several kbytes. However, given the overhead on packet level and theadditional overhead caused by the forward error correction, even much larger segmentswill not significantly reduce the total overhead.
4.3.4 MOT Header Parameters
Depending on the type and characteristics of the user application, the ‘MOT headerextension’ may contain different parameters which the application needs for data man-agement and presentation. The parameters may appear in any sequence. This sectiondescribes some of the most important ‘header extension’ parameters for MOT objects; alist of all general MOT parameters can be found in [EN 301234], application specificparameters are defined in the application specification (e.g. the MOT Broadcast Websitespecification [TS 101498]).
MOTbasic transport parameters. These parameters identify the object, indicate its typeand signal whether the object is compressed during transport.
MOT caching support parameters. These parameters are used in MOT directory modeonly. They support cache management. Using these parameters, the MOT decoder caneasily determine if the objects in its cache are still valid. So on start-up or if the userchanges between different DAB ensembles, the MOT decoder only has to wait for thenext reception of the MOT directory and then it can tell which objects are still valid andwhether outdated objects may be presented until the current version of a specific objecthas been received. Two other important issues are addressed by these parameters.
The service provider can control object expiration (MOT parameter ‘Expiration’) andthus ensure that anMOT decoder that no longer receives any data (e.g., because the useris inside the sub-way) will not present data whose validity can no longer be verified. Theservice provider can specify a time interval and in case of a loss of reception longer thanthe specified time interval, the MOT decoder will refrain from presenting objects whosevalidity it can no longer verify.
Another parameter controls the MOT decoder behaviour in case of an object update(MOT parameter ‘PermitOutdatedVersions’). User applications such as the MOTBroadcast Web Site have web pages that may contain inline objects such as images. Ifthe web page is updated, it can be signalled to the receiver whether the old web page canstill be presented until the new version of the web page has been received. If consistencyreasons require that the new web page be presented with the new versions of the imagesonly, then this can be signalled to the receiver. However, in this case a user will notice thatthis web page is available in the MOT decoder until it receives the MOT directorycontaining the meta information for the new web page and the new images. ThereupontheMOT decoder will remove the old web page and the outdated images and wait for thenew version of web page and images. Receiving these objects can take a significantamount of time. Normally, the user will prefer to see the outdated version of a webpage until the update is received. In order to avoid inconsistencies (mismatch between
174 Digital Audio Broadcasting
![Page 204: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/204.jpg)
inline images and the web page itself), the service provider must ensure that updatedinline images having a logically different content also use different object identifiers(MOT parameter ‘ContentName’).
4.3.5 Advanced Features of the MOT Directory Mode
The latest revision of the MOT standard [EN 301234] includes features to reduce thereceiver footprint and to increase the receiver performance:
• It is recommended that the list of header information inside the MOT directory issorted in ascending order of the MOT parameter ‘ContentName’ (mandatoryparameter that identifies each MOT object). The MOT parameter ‘Sorted-HeaderInformation’ then tells the receiver that when it compares two versions of theMOT directory, it can efficiently compare two sorted lists (old and new MOT direc-tory). Comparing an unsorted list requires many more resources.
• Earlier MOT directory mode implementations first reassembled the MOT directory.Processing and storage of MOT body segments started after the MOT directory wascompletely reassembled. These simple implementations unnecessarily discarded MOTbody segments (those received before the MOT directory) and thus slowed down thestart-up procedure. Since the start-up behaviour is critical for user acceptance, theMOT standard now indicates howMOTbody segments can be collected and processedas soon as the MOT directory is reassembled. Such implementations can utilise allMOT body segments and they provide a much better performance on start-up andafter changes to the MOT directory.
4.4 Standardised MOT User Applications
Several user applications based on theMOT Protocol have been defined and standardised.This allows data applications to run on data terminals from different manufacturers.
4.4.1 MOT Slideshow
AnMOT Slideshow [TS 101499] consists of a sequence of slides (images) which should bepresented to the user one after the other. The MOT Slideshow (like the Dynamic Labels)is a broadcaster controlled data application. Once this user application is started on thereceiver, the broadcaster determines when which slide will be presented; user interactionis neither needed nor possible.
The MOT parameter TriggerTime within the header information of all slide objectsdetermines when a slide will be shown on the display. It is possible to indicate an absolutetime (e.g., 2008-02-17 12:07:40 UTC) or ‘Now’. ‘Now’ indicates that the slide shouldbe shown on the display as soon as the slide is completely received and decoded. Anabsolute trigger time must only be used if the broadcaster is able to ensure that thereceiver has enough time to receive and decode the image before it has to be presented.It is also possible to send a slide without any trigger time and trigger it later on with anMOT header update that provides an absolute trigger time or ‘Now’.
Data Services and Applications 175
![Page 205: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/205.jpg)
The current MOT Slideshow standard uses one single object buffer on receiver side.This reduces the receiver footprint, but implies that for instance only the last receivedslide can be triggered by an MOT header update. Image formats JPEG and PNG aresupported and the image size is limited to 50 kbytes. The recommended screen resolutionis 320x240 pixel.
TheMOT Slideshow supports two image formats. JPEG compression is best suited forphotographs. However, especially at a high compression ratio, JPEG is not well suitedfor embedded text or diagrams. PNG is a loss-less compression scheme and best suitedfor diagrams such as station logos or embedded text. In order to get the best quality at thesmallest image size in bytes, it is beneficial to choose the image format depending on thecontent of the image.
The MOT Slideshow is currently revised and the Slideshow decoders compliant to thenew revision will provide 450 kbytes of memory to store several slides for later triggering.It will then for instance be possible to upload several large slides ahead of a news blockand trigger the slides within several seconds matching the current news. In the currentMOT Slideshow specification, the time between the presentation of two slides can not beshorter than the transmission time of the slides. The new revision will also supportanimated images (APNG format) in a backward compatible way.
The feasibility and application of such an MOT Slideshow have been demonstrated atexhibitions [Hallier, 1994b] and in some pilot projects. Mobile DAB devices with colourscreens now appear in the market, therefore theMOT Slideshow gets usedmore andmore.
4.4.2 MOT Broadcast Web Site
The user application ‘MOT Broadcast Web Site’ [TS 101498] offers the user a web baseddata application with local interactivity. Such a service consists of linked objects (HTMLfiles, images, animations, audio files, etc.) which are organised typically in a tree-likestructure below a start page. The objects of such a service are broadcast cyclically in a‘data carousel’. To minimise the start-up time for a user who turns on his or her terminalor selects the ‘Broadcast Web Site’ application, the data objects of the application shouldbe prioritised and broadcast accordingly. It is advisable to broadcast the start page veryfrequently, say every 15 . . . 30 seconds. The next level of objects – normally the objectswhich are directly referenced by the start page – should also be broadcast ratherfrequently, the next levels less frequently and so on. Also the priority of larger JPEGpictures could be handled independently of the HTML pages; this can further improvethe response time. This priority management has to be done at the datamultiplexer and isfor example implemented in the data server of one supplier (Fraunhofer IIS). Using sucha priority management, the user may start to navigate through the upper level ofinformation already received while the lower levels are received in the background.
It is possible to update single objects or parts of the application simply by transmittingthe updated objects.
Using the MOT directory, the object management is quite easy: having received theMOT directory, the terminal can decide for example how to organise the storage, whichobjects should be received or discarded, etc. The updating and deletion of objects isexplicitly controlled by the service provider broadcasting an update of the MOT
176 Digital Audio Broadcasting
![Page 206: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/206.jpg)
directory. In addition, the integrity of the data set contained within the data carousel willbe ensured by using the MOT directory. It is recommended to support the MOT cachingfunctionality, especially if the receiver also has persistent memory. Start-up of the BWSon receiver side can be greatly improved by supporting the collection of MOT segmentseven before the MOT directory is completely received, see [EN 301234] for details.
Please note that even if an MOT Broadcast Web Site is in many aspects similar to websites on the Internet, it is usually not possible to simply broadcast an existing Internet website. The reason is thatmost Internet web sites are usually too large to be transported via abandwidth-limited DAB channel in reasonable time. Mobile terminals will also usuallyhave smaller screens and limited scrolling capabilities, therefore the content has to bespecifically tailored towards the capability of the mobile device. Also the content has tobe selected depending on the needs of a mobile user.
4.4.3 Electronic Programme Guide (EPG)
This user application also uses the MOT protocol. The EPG is explained in detail insection 5.5.
4.5 Text Based Services
4.5.1 Dynamic Label
TheDABDynamic Label application enables the presentation of short text messages, theso called dynamic labels, on the receiver display. The basic functionality resembles that of‘RDS Radiotext’ known from analogue FM broadcasts. The update of information istriggered by the broadcaster.
The provided content mainly refers to the currently running audio programme: songtitle and artist, name of the show and the announcer, phone numbers, short news flashes,etc. Due to the close link of this service to the audio programme they are carried withinthe audio stream’s PAD channel. Almost every DAB (and DRM) programme today isaccompanied by these short text strings, and basically all available digital radio receiverswith a display present this kind of information.
The maximum length of a label string is 128 bytes. During transport, each label isdivided into up to eight segments. Each segment carries up to 16 bytes of the label string.
The segments are transported in X-PAD data groups. These data groups carryingDynamic Label segments are signalled with the X-PAD application types ‘2’ (start ofdata group) and ‘3’ (continuation of data group). The basic structure of an X-PAD datagroup carrying a Dynamic Label segment is shown in Figure 4.2.
CRC
X-PAD data group for Dynamic Label segment
(Character field n bytes)Prefix (2 bytes)
Figure 4.2 X-PAD data group carrying Dynamic Label
Data Services and Applications 177
![Page 207: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/207.jpg)
Each X-PAD data group carrying a Dynamic Label segment consists of a 16 bit prefixwith control information, followed by a character field of up to 16 bytes as part of thecomplete label string. At its end the data group carries 2 bytes (16 bits) of CRCinformation for error detection.
The segments of a single Dynamic Label string are identified by the segment numbercarried in the prefix field. They can be transmitted in any order. Repetitions of identicalsegments can be used to increase the reception probability in case of high bit error rate inthe transmission channel, but it is not allowed to interleave segments of different labelstrings.
Dynamic Labels use the character set ‘Complete EBU Latin based repertoire’ or ISO10646. Similar to labels encoded in FIG type 1, support of the character set ‘CompleteEBU Latin based repertoire’ is mandatory for the receiver. In addition, the character setISO 10646 should be supported with both UTF-8 and UCS-2 encoding. The (sub-)set ofcharacters that can actually be presented on the display will depend on the target marketof the receiver.
For markets such as China it might be useful for a receiver to support the definition ofcharacters via a pixel grid, to allow the presentation of very specific and broadcaster-defined characters. This is supported by FIG type 2 extension 7, see also section 2.5.2.
In order to allow for some minimum formatting capabilities for the labels and tooptimise the label presentation for smaller displays, some special control characters aredefined. Using these control characters, preferred word and line breaks as well as head-line sections may be defined. In addition, a command to clear the display is provided. Theadditional control codes count as normal characters; therefore the maximum number of128 displayable characters within one Dynamic Label string will be reduced by thenumber of control characters used within the label string. For more informationregarding the coding and formatting of Dynamic Label strings, see section 5.4.4.
In 2007 the DAB Dynamic Label application was extended by two specifications:‘Dynamic Label Plus’ and ‘Intellitext’. Both definitions optionally enhance the existingDAB Dynamic Label application with specific functionality in a backward compatibleway. The general limitations of the Dynamic Label service are respected. This refers tothe maximum possible text length of 128 characters per label, and the minimum delaybetween label updates to give the user sufficient time for reading a label shown on screen.
‘Dynamic Label Plus’ [TS 102980] makes it possible to mark up parts of a message, andto indicate the content type of these parts, like song title and artist name. This enables areceiver for example to keep the current song title permanently on screen. The extensionprovides basically the same functionality as the ‘RadioText Plus (RT+)’ specificationdefined by the RDS Forum.
As an example, the DAB Dynamic Label string ‘You are listening to ‘‘Yayayeyo’’ byThe Splendids’. could be tagged to carry the title of the current song from index position22 with a length of 8 characters, and the artist name starting at index 36 with a length of13 characters.
Several types of content can be defined. The pre-defined type codes comprise musicand audio description (like ID3 tags known from MP3 files), information items (likeweather, lottery), programme description (like now, next, host), interactivity indicators(like phone or sms numbers), and special items. The list of defined type codes is part of theETSI standard.
178 Digital Audio Broadcasting
![Page 208: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/208.jpg)
The tagging information is carried in a DL Plus Command message of type ‘DL PlusTags’, immediately following the associated DAB Dynamic Label message. An ItemToggle Bit allows various pieces of information to be correctly assigned (spanningmultiple DL Plus Command messages) per programme item (e.g. a song or show). TheItem Running Bit can be used for example to indicate the temporary interruption of anitem (e.g. a tagged show being briefly interrupted by news).
The ‘Intellitext’ extension to the DAB Dynamic Label service was finalized in 2007 [TS102652]. It defines a specific text string format for dynamic label messages, which enables areceiver tomake earlier receivedmessages available through amulti-level selection structure.
Other than the Dynamic Label Plus application that requires new Dynamic Labelcommands (i.e., an extension of the transport protocol), Intellitext purely relies on aspecific format of the visible text of a label string to enable this functionality. The generalstructure of an Intellitext compatible Dynamic Label message is ‘<menu><submenu_index> - <submenu> <data_index> : <data> <time_to_live>’. Some ofthese elements are optional. For example, the Dynamic Label string ‘Football - Prem LgeTable[1]: 1. Chelsea 27 pts; 2. Spurs 18 pts; 3. Charlton 16 pts’ would be available to thelistener through the Intellitext menu structure as three list items ‘1. Chelsea 27 pts’,‘2. Spurs 18 pts’, and ‘3. Charlton 16 pts’ in the menu ‘Football’, submenu ‘Prem LgeTable’. The index value ‘[1]’ after the submenu name allows for a later update of specificitems within the main menu. Using the<time to live> element at the end of an Intellitextcompatible Dynamic Label string, the broadcaster can optionally influence the timeoutvalue for any Intellitext message using ‘.’ (dot) characters: One ‘.’ character represents atimeout value of 24 hours, two ‘..’ indicate 12 hours, and three ‘. . .’ characters finallydemand a maximum of 1 hour.
All Dynamic Label messages are visible to those DAB receivers not equipped withIntellitext. A receiver aware of Intellitext may still choose to show all Dynamic Labels inreal-time on screen, while only those strings conforming to the Intellitext format wouldbe stored in the menu structure for later access by the user.
4.5.2 Journaline
4.5.2.1 Introduction
The benefit of the straightforward DAB Dynamic Label user application (see 4.6.1) is itssimplicity and subsequently its support in almost any modern radio receiver. However,
You are 0 5 10 15 20 25 30 35 40 45
Character index
DL Command
Tag start idx: 22; len: 8; type: ”song title“
DL Command
Tag start idx: 36; len: 13; type: ”artist“
DL Segment
listening to 'The'Yayayey by Splendids'o'
Figure 4.3 Example of Dynamic Label Tags
Data Services and Applications 179
![Page 209: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/209.jpg)
the application is mainly intended to provide highly programme-related content forquick lookup on the display, like the current song title and artist. The content and itspresentation order are pre-defined by the broadcaster. There is no possibility for the usersto interactively and immediately access detailed information that is currently relevant tothem, let alone access to information that may not even be programme related.
For that kind of interactive and on-demand access to information, another dataapplication had originally been designed – the MOT Broadcast Website (see 4.4.2).This solution is very flexible. But at the same time it requires a relatively high bit rateto transport the content. The decoding, presentation and user interaction is demanding interms of cache memory requirements, HTML parsing and rendering, required PC likegraphical user interfaces (ideally with a pointing device), and so on. Early field trials inGermany showed that one of the most disturbing aspects for broadcasters and contentgenerators was the fact that the web standards based application promised a predict-ability of rendering results that could not have been fulfilled– any radio receiver wouldpresent the carefully designed layout of the HTML pages in a different way.
Therefore a new data service, Journaline, was developed as part of the publicly fundedproject RadioMondo [Kilian, 2005]. That application should combine the benefits ofsimple text messages and interactively available information, and at the same time takeinto account the tough bandwidth restrictions of the new DRM broadcast standard.
Journaline provides the radio user with interactively accessible textual information.The typical use case is comparable to the teletext service on a TV set or an electronicmagazine. The Journaline specification – originally developed with the tight bitraterestrictions of DRM in mind – was picked up by the WorldDMB forum as the newtext based information service, and standardised in September 2007 through ETSI [TS102979] for use in both DAB/DMB and DRM transmissions.
The data service is designed with simplicity and efficiency as primary goals. Thisinvolves all parts of the broadcast chain: Broadcasters can easily reuse existing datasources like RSS feeds and XML data. The content is encoded in a binary form andcompressed to minimise the required transmission bandwidth. On receiver side both thedecoder footprint in terms of CPU and memory, as well as the minimum required userinterface functionality are very small.
This last aspect enables the integration of a Journaline decoder into the full range ofdigital radio receiver classes: from price sensitive bedside and kitchen radios to high-endmultimedia devices with graphical displays. The application even supports special envir-onments like car radios by providing speech hinting information for high quality text-to-speech playback.
4.5.2.2 Functionality
The concept of Journaline is based on the following requirements:
• provision of pure text information with worldwide applicability;• interactive, immediate access by the user to all provided information;• easy integration of existing information sources by the broadcaster (RSS, XML
standards);
180 Digital Audio Broadcasting
![Page 210: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/210.jpg)
• efficient information encoding and transport to support any radio broadcast standard,including the narrow bandwidth DRM system;
• smallest possible decoder, memory, and user interface footprint in the receiver;• optional support for text-to-speech playback of text information in receivers, inter-
activity (back channel establishment and linking to web URLs, e-mail, SMS, otherJournaline pages, other DAB services, etc.), and geo tagging of information to enablelocation based services;
• easy future extensibility, maintaining full backward compatibility to existing decoders.
Figure 4.4 demonstrates the basic idea and functionality of the resulting Journalineapplication: Textual information is selected through a menu structure.
The immediate access to all available information is enabled by organising all serviceelements in a hierarchical tree structure (as shown in Figure 4.5).Menus allow for a quickselection of currently relevant topics and information.
Every menu and every text page is a self-describing and self-contained object. At nomoment does the receiver need to build up or evaluate any internal object hierarchies ordirectories – one building block for low minimum memory requirements.
Hence, the decoder could even work without any cache memory: by waiting for thereception of the main menu and presenting it to the user, by then waiting for the selectedtarget object and presenting it upon reception, and so on. Of course the availability ofsome cache memory greatly enhances the service responsiveness to the user.
Every object (menu or text) is efficiently encoded in JML (Journaline MarkupLanguage), a binary representation of XML formatted content. Finally a compressionscheme is applied to the plain textual information.
In addition, all aspects of the service are restricted to sensible maximum values, whichshould hardly ever be reached in a real-world Journaline service. This applies to objectsize, maximum object count per service, maximum number of selection targets per menu,
Figure 4.4 Navigating through Journaline content (Windows based decoder)
Data Services and Applications 181
![Page 211: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/211.jpg)
maximum number of menu hierarchy levels, and so on. These restrictions enable theefficient implementation of a Journaline decoder even on embedded and restrictedmicrocontroller platforms, and thereby serve the goal of supporting all classes of digitalradio receivers.
4.5.2.3 Types of Information Pages
Every information page (i.e. object) represents one menu or one text page. It is encodedand transmitted independently from any other object, and distinguished by a unique IDwithin the Journaline service.
Currently four types of information pages are defined. They will briefly be introducedbelow along with their individual features and behaviour rules. In general, the minimumrequirement for a Journaline compliant receiver is to make all textual content accessibleto the user. However, the Journaline specification does not define any strict or preciserendering requirements beyond the general rules stated below, to allow for a flexibleoptimisation of the text presentation for any receiver type.
‘Menus’ (see Figure 4.6) enable the user to select other (sub-) menus and text pages.They are composed of a title and a range of link targets, while marking the current
T
Object ID0x0000
Menu Object
Message Object
MM
M M T T
T T
T
hierarchyhevel
1
2
3
4
max
. 20
hier
arch
y le
vels
max. 32 link items per Menu Object
T T
MT
add. possiblelink patterns
Figure 4.5 Hierarchical tree structure of menus and text pages
Sports - Germany - SoccerBundesliga 32nd Round
[Second Bundesliga 32nd Round]
[Regional League South] Regional League North
Figure 4.6 Example of an information page ‘Menu’
182 Digital Audio Broadcasting
![Page 212: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/212.jpg)
selection position of the user. Optionally the cache status of a link target may be visuallyhinted – if the linked information page is already in the cache, the user can access itimmediately without waiting for its next reception.
Upon reception of a new version of the currently presented ‘Menu’, it shall be updatedimmediately on the screen while maintaining the user’s current selection position.
A ‘Plain Text Message’ (see Figure 4.7) is composed of a title and the body text. Theuser can vertically scroll through the full text. If an updated version of the text is received,this may be indicated to the user, but no automatic update of the screen content should beperformed.
Information pages of type ‘List/Table’ (see Figure 4.8) are especially helpful when itcomes to presenting sports results or financial information like stock values. If anupdated version of such a page is received while it is shown on screen, the display shouldbe redrawn immediately while keeping the user’s current scroll position. So if the user hasscrolled down to have their favourite sports club visible on screen during a match, theywill just notice the scores go up over time.
A ‘Ticker Message’ (see Figure 4.9) is composed of a single title element without anybody text. If possible, it should be completely visible on screen without any user
Germany tops EU service report (17:13) Research by the European Union'sstatistical arm Eurostat has placed Germany top of the EU productivity league in a range of services. The
Figure 4.7 Example of an information page ‘Plain Text Message’
Soccer - Bundesliga 32nd Round (16:15)TSV 1860 - Cottbus 3:0 Dortmund - Nürnberg 4:1 Hertha - Bayern 3:6Stuttgart - Bremen 0:1
Figure 4.8 Example of an information page ‘List/Table’
The housing boom continued in the firstquarter - Home prices nationwide spiked7 percent.
Figure 4.9 Example of an information page ‘Ticker Message’
Data Services and Applications 183
![Page 213: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/213.jpg)
interaction. Other than plain text messages, ticker messages are automatically updated onscreen as soon as a new version of the object is received. This functionality resembles thatof DAB Dynamic Labels and DRM TextMessages – however, as part of the Journalinemenu structure each ticker message page covers one specific topic. This feature enablesservices like news headline tickers (every ticker message optionally linked to a detailedinformation page), dynamic programme accompanying content (like song lyrics forKaraoke or closed captioning for editorial pieces), or video subtitles in various languages.
4.5.2.4 Formatting of Information Pages
All information pages are restricted to a maximum size of 4 kbytes (incl. 4 bytes MSCData Group Header and CRC), independent of their type.
The Unicode representation format UTF-8 is used for all text character encoding. Thisenables a Journaline service to support any international script and character set likeChinese, Arabic right-to-left, Cyrillic, etc.
Figure 4.10 describes the format of each Journaline Object. The Standard Headercarries the 16-bit Object ID, which uniquely identifies a Journaline Object within aJournaline service. The Object Type distinguishes Menus, Plain Text Messages, etc.The Compression Flag indicates whether the Content Section is compressed using adeflate mechanism. The Revision Index finally provides the Journaline decoder with aconvenient way to quickly identify whether the content of a newly received JournalineObject was changed compared to the version currently kept in cache.
The Static Flag supports the bookmark/favourite feature of Journaline, which allowsthe user to store the link to a specific Journaline page for quick later access (e.g. bypressing the radio’s station key). Many Journaline pages within a Journaline service(defined by their respective Object ID) carry random information. Therefore the
Header Section
max. 4092 bytes
Standard Header Content Section
3 bytes m bytes
Object ID Object Descript.
2 bytes 1 byte
7 6 5 4 3 2 1 0
8 bits
Object TypeStaticFlag Revision Index
CmprFlag
0..n bytes
Extended Header
Figure 4.10 Journaline Object Format
184 Digital Audio Broadcasting
![Page 214: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/214.jpg)
bookmark feature should only be enabled for those pages that will also in future carry thesame type of content (e.g. the local weather forecast), statically assigned to one specificObject ID. This is signalled to the receiver by enabling the Static Flag.
The length of the ExtendedHeader section is signalled as part of the service componentdescription. It is currently not used but will allow for a later extension of the Journalinespecification. A Journaline decoder must at least be able to ignore this Extended Headersection in case it is present.
4.5.2.5 Transmission of Journaline in DAB
Journaline supports two ways of organising the transmission of objects, and both wayscan easily be mixed within one single Journaline service: carousel mode and real-timetransmission.
Regular content is broadcast in the form of a data carousel. As soon as a receiver startsdecoding a Journaline service, it collects all received information objects and stores themin the cache for immediate future access by the user – until the objects are updated orremoved from the carousel. An updated object can be retransmitted immediately at anytime, as there is no previous adjustment to any global directory structure required. Usingindividual priority classes for different parts of the Journaline service, regularly updatedcontent can be broadcast more often than static content. And menus like the main menupage can be broadcast more often than other information pages to make the initial useraccess to the service as quick as possible.
Information pages in the form of ticker messages are updated regularly with changingcontent. In the case of an update, these ticker messages are broadcast immediately andthereby briefly ‘interrupt’ the running data carousel(s).
Each Journaline object is transmitted as one MSC Data Group, either in a packetmode sub-channel or within the X-PAD fields of a DAB/DMB audio/video sub-channel.It can be presented to the user as a stand-alone data service, or as a PAD data applicationaccompanying an audio/video programme.
If the same Journaline service component is linked to multiple services, each link mayindicate its specific page of entry. This way a broadcaster carrying multiple programmesin a DABMultiplex could signal a Journaline service component carried in packet modealong with all its programmes as PAD. However, depending on which programme theuser is currently listening to when accessing Journaline, they will be presented with aprogramme specific entry page. Nevertheless, the whole Journaline content is accessiblefor interactive exploration.
4.5.2.6 Current Status
Journaline has been available on-air as part of DRM transmissions for several years.Various international radio stations are providing Journaline information along withtheir radio programme as a service to their listeners. Some of these Journaline servicesconsume as little as 200 to 600 bits per second. DAB/DMB transmissions of Journalineservices started in 2007 with the availability of professional grade broadcast encoderequipment.
Data Services and Applications 185
![Page 215: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/215.jpg)
This platform-spanning availability of Journaline is appreciated by receiver imple-menters, including car manufacturers, as it eliminates the need for individual platformspecific implementations of data decoders and user interfaces.
Professional Journaline encoder solutions are available for various broadcast plat-forms. Journaline encoder modules are part of several commercially available broadcastserver systems, including those products based on the Fraunhofer ContentServer line.
Journaline decoder modules for integration into receivers are available for both open-source projects underGPL as well as for commercial grade applications. Figures 4.11 and4.12 visualise some examples of Journaline decoder implementations for various plat-forms. Car manufacturers have presented their own DAB data service developmentsbased on the Journaline user application.
Figure 4.11 Journaline decoder on Windows CE
Figure 4.12 Journaline decoder on a microcontroller platform
186 Digital Audio Broadcasting
![Page 216: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/216.jpg)
4.6 Traffic Information Services and Navigation Aids
In this section two approaches to traffic and travel information (TTI) services andsupport for differential GPS based on DAB are described. For a broader view on travelinformation broadcasting see [Kopitz, 1999].
4.6.1 Traffic Message Channel (TMC)
Traffic Message Channel (TMC) is a basic data application consisting of digitally codedtraffic messages, originally defined for RDS (Radio Data System, see [EN 50067])services in FM broadcast. All messages are coded according to the ‘Alert C’ Protocoland carry the following information:
• characteristics of the event: detailed information describing the traffic problem orweather situation;
• location: area where the problem occurred;• severity of the event;• duration: estimated duration of the event;• alternative route.
All this information is given in numeric code values which refer to the various tables(event, location, direction, duration, etc.) of the Alert C Protocol; these code values areassembled in ‘groups’. Each group consists of up to 37 bits of information.
Additional information can be given with special messages, e.g. a more precise defini-tion of the event’s location or a description of an exceptional event not covered by thestandard message table.
The handling of the messages (validation, time-out processing, priority management,etc.) as well as the presentation to the user could be done by an external decoder. Thepresentation can be done either by an alphanumeric display or by a speech synthesiserwhich generates spoken messages.
In DAB, the TMCmessages are carried in the FIDC in FIG 5/1. Several messages maybe assembled within one FIG 5/1 data field. A detailed specification how the TMC usermessages, system messages, tuning information and encryption administration data ismapped from RDS groups to FIG 5/1 and how the TMC service should be signalled inFIG 0/2 and FIG 0/13 was developed within the DIAMOND project and is nowstandardised in [TS 102 368].
A traffic information service based on TMC carried on DAB was first demonstrated in1995 when an external TMC decoder box which was originally designed for FM-RDSTMCwas connected to the serial port of a DAB data decoder. Since the infrastructure forcollecting the traffic information data was rather poor at that time, the service was fordemonstration only. In addition, the real-time insertion of the TMCmessages into the FICwas rather complicated. During the last few years this infrastructure has improved sig-nificantly and therefore DAB-TMC is now used in several countries for setting up a usefultraffic information service. Also the capabilities of the multiplexers and the data insertershave been improved with the introduction of the ‘Service Transport Interface’ (STI)which allows easy insertion of TMC messages assembled in FIG 5/1 (see section 5.3.3).
Data Services and Applications 187
![Page 217: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/217.jpg)
4.6.2 TPEG
TPEG stands for the Transport Protocol Experts Group of the EBUwhich developed anend-user-oriented application for the delivery of traffic and travel information (TTI)[Marks, 2000]. At the end of 2007, the TISA organisation (Traveller Information ServicesAssociation) took over the activities undertaken by the TMC Forum, the TPEG Forumand the German Mobile.Info project.
The TPEG specification defines the core protocol and the service layer. Service provi-ders may operate services which use one or more delivery technologies (e.g. Internet,DAB) from one message generation process. The application layer is scalable and allows arange of receiver types to be used simultaneously – from simple receivers with only a smallalphanumeric display up to integrated navigation systems. One of the key characteristicsof TPEG is the fact that there is no need for the end user to have a location database beforeusing the service. The location database is derived from digital maps at the service providerside and the location information will be transported to the end user embedded in theTPEG application. Another important characteristic is language independence. Messagesare not carried as free text, but as numerical values the receiver translates to a message in aspecific language. Therefore, for instance, a French car driver can get the traffic informa-tion in French, even when travelling through Germany.
Several TPEG applications exist:
• RTM (Road Traffic Messages): road based travel disruption information;• PTI (Public Transport Information): comprehensive public transport information;• PKI (Parking Information): parking space availability and pricing;• CTT (Congestion and Travel Time): information about congestions and the time it
takes to travel on a network;• TEC (Traffic Event Compact): describes events and their effect on the road network. It
is optimised for use by navigation systems;• WEA (Weather information): information about weather.
At this time, only the first two TPEG applications are accepted standards, the others areawaiting final approval.
TPEG is organised as a self-contained stream of data which contains all messages aswell as provisions for synchronisation and error detection. A TPEG stream should bebroadcast over DAB using the ‘Transparent Data Channel’ (TDC) specification [TR101759], see section 4.7. The Mobile.Info project (now part of TISA) requires the use ofTDC with data groups, each TPEG frame is mapped to one MSC data group.
First implementations of TPEG use an external application decoder connected to aDAB data receiver and have been available as prototypes since the beginning of 2001.
4.6.3 Differential GPS
For navigation purposes the satellite-based ‘Global Positioning System’ (GPS) is widelyused. A miniaturised satellite receiver receives information from five or more satellitesand calculates from the data sent by the satellites and the receiving delay its currentposition.
188 Digital Audio Broadcasting
![Page 218: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/218.jpg)
GPS was originally designed for military applications and the accuracy for civil useswas artificially deteriorated. The artificial noise added to the GPS signal was removedseveral years ago. Since then GPS is accurate enough for most applications.
In order to increase the positioning accuracy for high precision applications,Differential GPS (DGPS) can be used. The basic principle is to use a stationaryreference receiver with a well-known fixed location. This reference receiver comparesits known location with the location calculated from the satellite data. The differencebetween these two locations is transmitted in the standardised ‘RTCM 2.1’ format viaa broadcast channel to mobile GPS receivers. These receivers may then correct theposition calculated from the satellite data by the additional information and so reducethe positioning error.
DGPS data is broadcast using the Transparent Data Channel (TDC, see section 4.7)feature of DAB. The use of TDC with data groups is recommended.
4.7 Other Data Transmission Mechanisms
4.7.1 Transparent Data Channel
The Transparent Data Channel (TDC) [TR 101759] provides DAB with the ability totransport any type of data using the following DAB data channels:
• packet mode data service component;• stream mode data service component;• PAD channel inside an audio service component.
TDC data inserted into a stream mode data service component must be synchronouslyprovided at exactly the rate of the streammode sub-channel. Since all DAB sub-channelsare a multiple of 8 kbps, the application using the TDCmust either have a bit-rate that isa multiple of 8 kbps, or it must use padding to fill up the TDC bit-rate to the next multipleof 8 kbps.
TDC in a packet mode data service component or the PAD channel of an audioservice component are asynchronous. Data can be provided at any bit-rate up to amaximum bit-rate. It is possible to use the TDC with or without MSC data groups.Communication systems use blocks of bytes at their lower protocol layers. To mapthese protocols to DAB, usually a block of data (e.g., a so called ‘frame’) is mapped toan MSC data group. Therefore many non-DAB protocols can be carried via DAB byusing MSC data groups. For completeness, it is also possible to carry a sequence ofbytes (TDC without data groups). This is similar to a pipe where bytes inserted at thetransmission side are output again at the receiver side. However, reception errors maycause bytes to be corrupted or lost. Therefore the receiver must have synchronisationmethods to re-synchronise to such streams, individually for each proprietary framing.This adds unnecessary complexity to a receiver compared to TDC with data groups.For all applications that provide data in blocks of bytes (‘frames’), the use of TDCwith data groups is recommended.
Typical applications using the TDC protocol are Journaline (see section 4.5.2), DGPSor TPEG.
Data Services and Applications 189
![Page 219: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/219.jpg)
4.7.2 IP-Tunnelling
4.7.2.1 General Principles
There are two different ways to distribute data across DAB. The MOT protocol, devel-oped for DAB applications, enables the transport of multimedia objects as described insection 4.3. However, the Internet Protocol (IP) is the basic transport mechanism thatmost computer networks are using. Clients and servers use IP addresses to communicatewith each other. The Transmission Control Protocol (TCP), [RFC 793] and the UserDatagram Protocol (UDP), [RFC 761] are subsets of the widely used IP protocol. It isalso possible to use other protocols than UDP or TCP on the Internet transport layer.The multimedia objects are split into IP packets on the transmission side. Depending onthe client application, incoming packets are reassembled or handed over directly to theapplication (e.g. Media Player). The advantage of this technology is that it is possible totransmit the multimedia content via different distribution mediums without having toconvert between different transmission protocols.
An important feature that IP supports are streaming data applications, in contrast tothe MOT protocol which does not support streaming data applications since it wasdesigned for the transmission of whole data objects. The MOT protocol transmitswhole data objects at once whereas the IP datacasting protocol is defined for streamingvariable sized data chunks.
To enable the transport of Internet Protocol (IP) packets [RFC 791] in a DAB datachannel, an appropriate mapping of IP packets on the protocol structure of DAB packetmode was developed. This is called IP datacasting. Essentially, IP packets are ‘tunnelled’through theDAB protocol stack. The distribution of IP packets in aDAB data channel isunaffected by their contents.
The available IP data rate depends on the DAB multiplex configuration as well as theerror protection profile used. The maximum data rate for an IP datacasting service islimited by the data rate of an entire DAB ensemble, e.g. 1152 kbps, with an equal errorprotection of protection level 3 (see Chapter 2).
The IP tunnelling standard [ES 201735] describes a transport mechanism for thedistribution of IP services via DAB. The encapsulated Internet Protocol is used as acommon network layer. Given DAB broadcast properties, IP tunnelling is limited tounidirectional communication. If bi-directional communication is necessary, TCP viaUMTS, GSM or GPRS is used as a return channel. The corresponding standards are[TS 101736], [TS 101737].
4.7.2.2 IP-Tunnelling-Standard
The ETSI Standard [ES 201735], named ‘Internet Protocol datagram tunnelling’,describes the transport of IP packets in a DAB data channel. The tunnelling of IP packetsvia DAB is shown in Figure 4.13. The IP packets are tunnelled through a DAB packetmode service component. This is done by encapsulating the IP packets in a Main ServiceChannel (MSC) data group on packet mode transport level (see section 2.3.3.3).
The payload of one MSC data group defines exactly one IP packet. According to theMSC data group data field specification [EN 300401] the maximum size cannot exceed
190 Digital Audio Broadcasting
![Page 220: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/220.jpg)
8191 bytes. If an IP packet exceeds this maximum value, the data payload will berepackaged into smaller datagrams. [RFC 791] specifies the way a packet is fragmented.If fragmentation occurs the payload remains unchanged.
The signalling of encapsulated IP packets as well as the identification of IP packetservices is defined in the Fast Information Channel, see section 4.2. The correspondingData Service Component Type (DSCTy), which indicates the type of the data, is called‘Embedded IP packets’.
The DAB broadcast channel provides a guaranteed quality of service and bandwidthto all services carried within the multiplex. For data applications different error protec-tion levels may be used. The reception reliability can be increased by repeating datagroups on the DAB packet mode transport level. Most IP implementations do not workcorrectly receiving multiple copies of the same IP datagram and therefore the duplica-tions of identical IP datagrams must be eliminated by the DAB receiver/data decoderbefore forwarding the IP datagrams to the application.
The IP as well as the MAC Address is configured during the installation by the localnetwork administrator. The configured IP and MAC Address has no influence onreceived content. The secure addressing of different user groups can be realised with aconditional access system within the receiver or on the IP application level.
Unlike the DAB native MOT protocol the encapsulation of IP packets into the DABprotocol requires additional overhead due to its header information. IP packets carrydifferent additional information into the header, e.g. destination address, type of service,time to live, etc. which are needed for distribution into networks.
From the viewpoint of the information provider the distribution of data via IP packetssimplifies the broadcast architecture by avoiding the need to convert content into a DABspecific protocol. Unlike MOT the IP encapsulation enables real time streaming likedigital TV as well as other applications. For further details of IP based multimediaservices see section 9.3.
CRC(optional)
Data Group Data FieldData Group
Header
IP Header DATA
CRC
CRC
Packet DataField
Packet DataField
PacketHeader
PacketHeader
IP Datagram
MSC DataGroup(Packet Mode)
Packets
Figure 4.13 Encapsulation of IP packets for DAB transport
Data Services and Applications 191
![Page 221: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/221.jpg)
5
Provision of Services
5.1 The DAB Service Landscape
The introduction of DAB took place during a period of great change in the radio world,in general. Following the digitalisation of studios and consumer products, now themeansof transmission to living rooms and cars are going to be digital. Furthermore, in additionto speech and music, until now the only forms of presentation to audiences, new kinds ofmultimedia applications will be introduced with the Internet, digital broadcasting andnew generations of mobile communication systems.
The migration from the existing to necessary new infrastructures for the provision ofmultimedia services is a major challenge for content and service providers. Depending onthe intended amounts of investments, the appearance of service providers in DAB will bevery variable.Most of the radio stations are starting with a simulcast of existing analogueaudio services. Some stations are also providing data services for a better general servicefor the audience. However, few providers are launching new audio services. In all thesecases, the accessibility of listeners plays a decisive role. As a result of the normally slowappearance of new technologies, broadcasters have to exploit synergetic aspects of othermedia during the generation of a service. One time generating – several times distributing.
The intention of this chapter is to describe the service generation, the adaptation of theDAB system to interfaces of other media and the gradual integration of the necessaryinfrastructures in broadcasting houses. Most of the examples described are taken fromthe experiences of German broadcasters.
5.1.1 Structure of DAB Service Organisation
In the past, only a simple structure of responsibility was needed in a broadcast system: theprogramme provider (editor, supervisor or similar) was responsible for the production ofthe final content and form of a radio programme and for the studio output into thebroadcast chain for distribution and transmission to the customer, without any furtherchanges in content or quality. This was true for AM and FM/ VHF radio, and partly alsofor the first digital radio services (DSR, ADR, etc.).
Digital Audio Broadcasting: Principles and Applications of DAB, DAB+ and DMB, Third Edition Edited by W. Hoeg and T. Lauterbach© 2009 John Wiley & Sons, Ltd. ISBN: 978-0-470-51037-7
![Page 222: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/222.jpg)
The very complex structure of the contents of DAB (i.e. audio programmes withdifferent formats and quality levels, programme associated data, independent dataservices, programme service information) and its grades of freedom to change dynami-cally several parameters of the multiplex requires a more diverse responsibility formanaging the final content, form and quality of a DAB service by
• the programme provider;• the service provider;• the ensemble provider.
Figure 5.1 shows a simplified structure of the processes of service provision for a DABservice ensemble.
5.1.1.1 Programme Provider
For audio programmes, the programme provider may have the same tasks concerningcontent as in a conventional audio broadcast service, but in addition will also providesome other programme-related information (Programme-associated Data PAD) such asDRC (Dynamic Range Control) data, M/S (Music/Speech) flag (see section 3.5), pro-gramme SI (Service Information) such as dynamic label, language assignment, pro-gramme type assignment, announcement type (see section 2.5.), and so on. All thesedata are of a dynamic type, which means that they will change in a close time relationshipto the current programme content.
Ensemblemultiplexer
Datainserter
DataContent provider
– Independent data services, still or moving pictures
Service provider
– Programme multiplexing– Service SI (static/dynamic)– Service management
Ensemble provider
– Service multiplexing– Ensemble SI (static/dynamic)– Ensemble management
AudioProgramme provider– Audio programmes – PAD– Programme SI (dynamic), RDS
Contentmanagement
Ensemblemanagement
Servicemanagement
Servicemultiplexer
Figure 5.1 Structure of the management process of DAB services
194 Digital Audio Broadcasting
![Page 223: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/223.jpg)
In a similar manner the programme (or content) provider for independent data serviceswill manage the contribution to a certainDAB service. This can be located apart from thebroadcast studio. The audio coding process itself can be allocated either in the broad-casting operating system or in the service multiplexer, which is the central component ofthe service management process.
5.1.1.2 Service Provider
The programme output is passed to a service provider, and a series of programmes is thenassembled into a programme service which may also contain other components inaddition to the audio programmes, for instance SI similar to RDS for FM/VHF broad-casting, or new, independent data services.
The SI can be of a static type (such as programme service label, programme type,regional identification, or of a dynamic type, such as programme type preview, pro-gramme number (see section 2.5.). Also new data services (e.g. traffic information or stillpictures for different purposes) which are completely independent of the main (audio)service can be assembled in a service multiplex. The service provider’s task is to define theorganisation of the service (i.e. the description of each service component and how theylink together), see [BPN 007].
Another task of the service provider will be the management of the service multiplex,such as reconfiguration requests or changes in audio parameters, such as data rate,mono/stereo and so on. Each digital audio bit stream has an individual data rate andaudio type (mono, stereo, Joint Stereo, etc.).
5.1.1.3 Ensemble Provider
Finally, a number of programme services (about four to seven), including the othercomponents of the Main Service Channel (MSC) and the Fast Information Channel(FIC), are multiplexed by the ensemble provider into one DAB service ensemble andfinally fed to the DAB transmitter(s). The ensemble provider is also responsible forparticular static and dynamic SI as shown in Figure 5.1. In general, this task will bemanaged by a separate organisation apart from that providing programme content orservices.
More details of selected aspects of the provision of services and the necessary infra-structure of the production processes for DAB are given in the following sections. Asthese technologies are still not very common at the time of writing, the descriptions maybe understood as an overview by means of examples or proposals for future implementa-tion. See also Chapters 2 (system concept), 3 (audio services and applications), and 4(data services) for details of the service components mentioned. Chapter 6 (collection anddistribution networks) details the functionality of the service and ensemble managementprocesses and the interfaces between them.
5.1.2 DAB Main Services
This section explains the structure of DAB services in some detail, for a better under-standing of the specific abstracts and coherence used later in the text.
Provision of Services 195
![Page 224: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/224.jpg)
Audio services, data services and the necessary configuration information areassembled as a so-called DAB multiplex. This multiplex is configurable and provides adata rate of approx. 1.2 Mbps. It is designed to transport an FIC and an MSC includingthe individual sub-channels which transport the audio and data services.
The DAB MSC provides mainly four service transport mechanisms:
• Service Information (SI) and TMC (within FIDC);• Sub-channel for audio services;• Programme-associated Data (PAD) carried within audio services;• Packet mode data carried in individual sub-channels for data services.
An example of a multiplex configuration with multiple audio services used in practice isshown in Table 5.1.
5.1.2.1 Example of a Typical DAB Ensemble
The DAB system is based on a multiplex that can assign different bit rates to eachindividual programme and that also allows dynamic reconfiguration. The lattercould be used to split one high-quality programme into two of lower quality orvice versa.
The actual protection ratio and bit-rate for each individual programme depend on thecodec used, the material for that programme and the intended audience. Although itwould be desirable from a quality point of view to always use high bit rates, this is noteconomical. More programmes at acceptable quality are a better deal than fewer pro-grammes at guaranteed CD quality.
Table 3.1 (see section 3.3.4) provides possible values taken from [BPN 007]. Table 5.1(a)lists the type of programme with recommended bit rates and channel configurations forcertain quality levels. We can see a fairly wide range of bit rates for all different qualitylevels.
Table 5.1 Examples of typical DAB ensembles
(a) Sets of suitable parameters for different materials and quality levels of audio services
Programme Type Format* Quality Level SampleRate kHz
ProtectionLevel
Bit Ratekbps
Music/Speech 1/0 Broadcast quality 48 UEP_2 or 3 112 to 160Music/Speech 2/0 Broadcast quality 48 UEP_2 or 3 128 to 224
Music/Speech 3/2 Broadcast quality 48 UEP_2 or 3 384 to 640Speech only 1/0 Acceptable quality 24 or 48 UEP_3 64 to 112Messages 1/0 Intelligible message 24 or 48 UEP_4 32 or 64Data None UEP_4 32 to 64
*Format codes: 1/0 mono2/0 two-channel stereo3/2 multichannel
196 Digital Audio Broadcasting
![Page 225: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/225.jpg)
The codingmode (stereo or Joint Stereo) is not included in this table, but experience showsthat the use of Joint Stereo coding can reduce the required bit rate. Again the existing codecimplementations differ significantly, and the actual audio quality therefore does so too.
A typical ensemble, as once broadcast in Bavaria, Germany, is shown in Table 5.1(b).The bit rates reflect the development that has taken place over the years in the encodersused. They are slightly lower than given in [BPN 007]. Also joint coding is employed forall stereo programmes.
5.1.2.2 Sub-channel for Audio Services
The sub-channels allow audio transmission according to the DAB family audio stan-dards: the basic DAB standards MPEG-1 [TS 11172] or MPEG-2 [IS 13838] and therelated new standards DABþ [TS 102563] and DMB [TS 102428]. The transport capa-cities are ordered from content providers at the network providers in the form ofCapacity Units (CU). The number of CUs defines the audio bit rate or packet modebit rate at the chosen error protection level (i.e. 140 CU; protection level 3¼ 192 kbps).For considerations of service variety and audio quality the transport of approx. six toseven audio services per multiplex is possible (see also Table 5.1(b) above).
5.1.2.3 Programme-associated Data (PAD)
Parts of the audio sub-channel capacities can be used for the transmission of ancillarydata. The information is transported synchronously within the MPEG-1 audio bitstream. The PAD comprises a Fixed PAD (F-PAD) control channel with a data rate of0.7 kbps and an optional Extended PAD (X-PAD) transport channel with capacities upto 64 kbps. Most of the actually offered audio encoders have a restriction of 16 kbps.
Table 5.1 (continued )
(b) DAB multiplex configuration for Ensemble Bavaria, Germany (Channel 12D)
No. Service Service ID(Hex)
Audio Mode Bit rate(kbps)
SubChID (Hex)
SubChSize (Cu)
ErrorProt.
1 Bayern 2 plus D312 Joint Stereo 128 0� 14 96 UEP3
2 Bayern 4 Klassik D314 Stereo 192 0� 11 140 UEP33 Bayern Plus D316 Joint Stereo 128 0� 0F 96 UEP34 BR Verkehr D31E Mono 64 0� 13 48 UEP35 On3Radio D317 Joint Stereo 128 0� 10 96 UEP3
6 B5 plus D315 Mono 96 0� 12 70 UEP37 Rock Antenne D319 Joint Stereo 192 0� 07 140 UEP38 Radio Galaxy D31B Joint Stereo 160 0� 06 116 UEP3
9 Mobil Dat Bayern E0D01008 none 0� 0B EEP3A10 EPG Bayern E0D41008 none total 0� 0B total EEP3A11 Mobile Info E0D01007 none 64 0� 0B 48 EEP3A
12 TPEG-BR-Test E0D21008 none 0� 0B EEP3A
Note: UEP¼Unequal Error Protection level, see section 2.3.3.
Provision of Services 197
![Page 226: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/226.jpg)
The following information can for instance be transported in PAD:
• F-PAD:
• Size of the extended data transport channel (X-PAD);• Control information for different listener situations DRC, M/S flag, see Chapter 3;• Ordering information (European Article Number, EAN, International Standard
Recording Code, ISRC);• In-house Data.
• X-PAD:
• Dynamic label (Radio text), Dynamic label plus;• Multimedia Object Transfer (MOT) protocol, for details see Chapter 4;• TPEG (within Transparent Data Channel, TDC);
Owing to the necessary time synchronisation of audio signals and the associated data, thePAD insertion should be operated under the responsibility of the content providers.
As a result of the synchronous transport of audio and PAD in a common bit stream,the following problem arises. During the audio encoding process the available bit rate isdetermined from the selected audio data, determining the PAD data rate. In cases of lowaudio bit rates, for instance 96 kbps, and a maximum PAD data rate of 16 kbps, areduction in audio quality may occur. The remedy is a sensible configuration of thecapacities for audio and PAD data.
5.1.2.4 Packet Mode Data
Besides the audio services, additional sub-channels can be configured in the MSC for thetransport of packet mode data services. Under the primary aim of covering the existinganalogue radio market in DAB during introduction of the system, capacities of approx.64 kbps for packet mode data services were realistic. With additional DAB frequencies inthe future, higher data rates will be feasible for multimedia or telematic services. Thepacket mode data are to be inserted either at the locations of the service providers (intothe service multiplexer) or at the network providers (into the ensemble multiplexer).
5.1.3 Data Services
5.1.3.1 Dynamic Label/Dynamic Label plus
The Dynamic Label format transports transparent text information and control char-acters with a length up to 128 characters within the PAD channel. The service can beeasily presented with alphanumeric text displays and thereby readily realised with cheapDAB receivers. The receiver supports the presentation of text according to the imple-mented display type, that is 32 characters per two lines or 64 characters per four lines. Thefirst receivers with possibilities for incremental or scrolling functions are now availableon the market. The broadcasters are responsible for a sensible service duration of singleDynamic Labels for text presentations in moving cars, see also section 5.4.4. TheDynamic label plus feature is backwards compatible to Dynamic label.
198 Digital Audio Broadcasting
![Page 227: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/227.jpg)
5.1.3.2 Multimedia Object Transport (MOT) Protocol
The MOT protocol allows the standardised transport of audio visual information, suchas still pictures andHTML content. The use ofMOT is similarly possible in the PAD andpacket mode. Three applications of the MOT protocol are used in DAB: the servicesBroadcast Website, BWS [TS 101498], Slideshow, SLS [TS 101499], and ElectronicProgramme Guide, EPG. For details see sections 4.4.2, 4.4.1 and 5.5, respectively.
5.1.3.3 Broadcast Web Site (BWS)
The BWS is a local interactive service, where the user selects the information alreadyreceived with a browser. This form of a ‘radio web’ is based on the mark-up languageHTML. Besides the application, profile types are also fixed in the standard. Theprofile types rule the technical requirements of the presentation platform. Two pro-files are associated with the BWS service. One is for services at integrated DAB datareceivers, that is for car PCs or navigation systems, with a display resolution of 1/4VGA (320� 240 pixels), HTML ver.3.2 and a storage capacity at least of 256 Kbytes.The second profile allows a non-restricted service presentation on PC platforms.Supporting the first profile has resulted in a larger accessibility for users, becausethe 1/4 VGA profile can be received at PC platforms as well as at integrated receivers.For more details see also section 4.4.
5.1.3.4 Slide Show (SLS)
This second application describes, on the basis of JPEG or PNG (Portable NetworkGraphics) files, sequences of still pictures. The order and presentation time of this serviceare generated by the provider. This service provides no local interactivity to the user. Thetransmission time depends primarily on the file sizes of the pictures and the PAD datarate (see Table 5.2).
Table 5.2 Transmission time of MOT services (examples)
Content Number of Files File Size Transmission Time(Data rate¼ 16 kbps)
PAD Packet Mode
CD-Cover (JPEG) 1 14 kbytes 7 s 7 s
Resolution 320� 240
CD-Cover (JPEG) 1 42 kbytes 22 s 22 s
Resolution 640� 480
HTML file 1 1 kbyte 0.5 s 0.5 s
Text only
HTML files 37 129 kbytes 1.10 min 1.05 min
Provision of Services 199
![Page 228: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/228.jpg)
5.2 Use of Existing Infrastructures
The radio world is going to be digital. This statement is valid for radio waves as well as foraudio signal recording and transmission and the work flows in the broadcasting houses.The introduction of computer-aided radio has lead to more efficient and simplified workflows. Computer modules connected over digital networks satisfy the requirements at ahigher rate during information processing, easy format checks and faster programmeproduction. The usage of computer-aided radio technologies provides a ready source fornew services.
5.2.1 Broadcasting Operation Systems
Broadcasting operation systems are the technical core of the audio production of everymodern radio station. The systems include function modules for capturing, archiving,scheduling and broadcasting on-air. The minimisation of the complexity of broadcastingoperation systems allows broadcasters to launch new programme formats with less effort.
Audio takes are captured data reduced in the MPEG-1 audio format. In order toavoid reductions of audio quality, in cases of encoder cascading, the archived data rateshould be chosen with the highest value (i.e. 384 kbps). During the archiving process,additional text information, like title, track and artist, is also captured. This informa-tion can easily be used as ancillary data for PAD information. The broadcastingoperation systems work in two different modes: full automatic or with moderationin a semi-assistant mode.
Editors arrange the stored audio information in daily play lists. During the runtime ofthe play lists, the stored audio takes will be replayed by MPEG PC cards (see alsoFigure 5.2).
DAB-Interface
Online Center
PAD Inserter
Packet ModeInserter
PAD
DAB
TeletextFormat
HTMLFormat
SpecialFormat
DAB-Adaptation:
– Content– Presentation– HTML-Version– File Size
DataServer
DAB-BrowserConversionwith ScriptLanguages
Teletext Studio
Editorial Systems
Figure 5.2 Editorial systems and DAB data interfaces
200 Digital Audio Broadcasting
![Page 229: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/229.jpg)
5.2.2 Editorial Systems
The editorial tools based on computer systems and servers provide large electronicinformation resources for the daily work of broadcasters. On completion of contribu-tions, those ready for post-production are passed to data services.
In this context helpful script languages such as PHP3 (Hypertext Preprocessor), PERLand JAVA are employed. Figure 5.2 shows an arrangement of an editorial system withthe necessary DAB interfaces.
The resulting data files are transported via local area networks to the connected dataservers. Internet template tools are very popular today in on-line service centres. Withthese text template systems, the service design can be made with pre-defined text fieldswhich have to be completed by the editors. This process allows one to individuallygenerate content for specific applications such as the Internet, DAB Broadcast WebSite or DAB Dynamic Label headlines.
5.2.2.1 On-line Service Centre
The optimal information source to provide DAB data services is on-line servicecentres. With the success of the World-Wide Web and the increasing numbers ofconnected users, many broadcasters have established on-line service centres on theInternet. The on-line editors are experienced and trained in the use of modernauthoring tools.
An example of on-line information, which is transported in a PAD channel, is theDABnews service of ‘B5aktuell’ in Bavaria. Actual news and background information may beextracted from the on-line content in a multimedia database. Additionally, the HTMLheader tags of these files provide basic information for text services using the Dynamiclabel feature.
5.2.2.2 Teletext
The teletext service, which was introduced during the 1980s in European countries, isone of the most popular ancillary services of broadcasting systems. Owing to theincreasing numbers of teletext users, broadcasters established their own teletext officesin-house. New TV stations are merging teletext and on-line centres into one commondivision.
Teletext is primarily the responsibility of TV editors, but if radio managers areconvinced about the vision of a ‘mobile teletext’ over DAB, the teletext system canbe used as an easy and economic data source. Such a service has been running inBavaria, Germany, for several years. The DAB network provider uses a PC-basedTV-receiver card with an integrated teletext decoder to provide a packet mode dataservice. The received teletext files of the Bayerischer Rundfunk are composed withthe script language PERL into a new DAB Broadcast Web Site service. This serviceprovides information on traffic, news, sport, business and the flight schedules ofBavarian airports.
Provision of Services 201
![Page 230: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/230.jpg)
5.3 Need for New Infrastructure
The previous section described adaptations to existing infrastructures. In most casesthe requirements of programme editors can be satisfied. Sometimes such approacheslead only to spot solutions, which are limited for future expansion. In this casecompletely new planning is necessary. The present section shows current develop-ments for a structured management of text, service information and multimediacontent.
5.3.1 Management of Text and Service Data
With the introduction of ancillary data within the Radio Data System (RDS) for FMradio, Astra Digital Radio (ADR) and DAB in Germany, a new need for a programme-oriented administration of ancillary data arose from German broadcasters. One of themain objectives was the provision of uniform data to the data inserter. The result of thisrequirement was the concept of the Ancillary Data Manager and the in-house dataprotocol called ‘Funkhaustelegramm’.
5.3.1.1 Ancillary Data Manager
The PC-based software Ancillary Data Manager was developed for the accumulationand distribution of ancillary data for a single radio service. The system concentrates,controls and provides information collected from sources like broadcasting operationsystems, editorial modules and studio contacts. The concept described appears underdifferent product names in Germany (see Figure 5.3).
Module Broadcasting Operation System. A text file interface to broadcasting operationsystems allows synchronised adaptation of text information to the current audio item.The file interface stores information (i.e. title, artist, ordering information) after mod-ification or new starts of audio takes. The contents of the file will be deleted at the end ofitems.
Module Editorial System. This module stores in a database pre-defined scheduledinformation like dynamic Programme Type (PTy), text masks, event texts or mod-erators. The text masks allow a more attractive presentation of titles, artists, times,moderators and magazine names.
Radiotext example:‘[MODERATOR] presenting at [TIME] the title: [TITLE] performed by [ARTIST]’.
Module News Flash. The Editorial System offers an input function for real-time newsflash information. Function keys of the PC keyboard can be linked to pre-storedtext fields e.g. for football matches to send quickly changing results by keyboard hitof the editor.
202 Digital Audio Broadcasting
![Page 231: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/231.jpg)
Module Relay Interface.A PC-relay card detects studio switching contacts, such as afader (signal level attenuator) contact in a traffic studio, for the generation of atraffic announcement (TA). The system supports 10 different announcement types(e.g. traffic, sport, news, transport, etc.). The relay interface also recognises themusic or speech status, for generation of the M/S flag, detecting the mixing consolefader.
External Data. An interface for pre-produced information allows the feeding of aformatted message called ‘Funkhaustelegramm’ (see section 5.3.1.2), that is TMC mes-sages or DGPS information.
Control unit. The central system part automatically schedules and formats the outputtingdata. Adjustment of different priorities and broadcast cycles of the input modulesdescribed above allows an optimal presentation mix.
For different applications, such as differences in the text lengths of DAB text(128 characters) or RDS text (64 characters), the configuration of different outputsis possible.
Basic adjustments can be made to the configuration of static information, namelyProgramme Source (PS), Programme Identification (PI) or Traffic Programme (TP).Table 5.3 shows the information types of the system.
The ancillary data manager formats the output data according to the RDS trans-mission protocol, see [ARD, 1994] or UECP (Universal Encoder CommunicationProtocol).
Audio capturingMultimedia capturingPlaylist editing
BroadcastingOperation Systemwith MPEG-Cards
Playlist
Service Multiplexer(incl. Audioencoder)
PAD
DAB
Audio Client
Audio Server
Audio
Anc. Data Man.Editorial Module
PAD-Inserter
Audio
Text Interface
MOT-Interface
SI-Inserter
FHT
Studio Contacts(TA)
Pre-Defined Text, PTY
Extern TMC
FIG
Figure 5.3 DAB studio infrastructure
Provision of Services 203
![Page 232: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/232.jpg)
5.3.1.2 In-house Protocol
A specially defined in-house protocol, the so called ‘Funkhaustelegramm’, is based at arecommendation of the ARD (German public broadcasters) for the distribution andtransmission of ancillary data in broadcasting houses. One of the main objectives of theprotocol definition was a uniform format for providing ancillary data to the datainserters for RDS, ADR and DAB (F-PAD and SI). The ‘Funkhaustelegramm’ (seeFigure 5.4) has a variable length and consists of three fragments: data head, data contentand check sum. The data head contains a sync word, length, information type and sourceand destination addresses. The recommendation considers all control, service and textinformation types of RDS, ADR and DAB. The source and destination addresses allowindividual addressing of a certain data inserter and recognition of the studio. The dataare transmitted to the data inserter with UDP/IP via local area networks (LAN) orRS232 serial data lines.
Table 5.3 Ancillary Data Manager information types
Type Information
CT Clock/TimeDl Decoder IdentificationDGPS Differential Global Positioning System
MS Music/SpeechODA Open Data ApplicationPI Programme Identification
PS Programme SourcePTY Programme TypeRT Radiotext (64 and 128 characters)
RTþ Radiotext plusTA Traffic Announcement and 10 add. typesTDC Transparent Data ChannelTMC Traffic Message Channel
TP Traffic Programme and 10 add. typesTTA Title – Track – Artist (only ADR)
Sync.
1 1 1 1 1
Length Type Source Target Content Chksum
n< = 254 1 (Byte)
Header
Type = 10
5
FS/ETX
1
X DS-No. rfu TA TP
1 4 3 1 1 (Bit)
Figure 5.4 Structure of the ‘Funkhaustelegramm’ (i.e. traffic announcement, TA)
204 Digital Audio Broadcasting
![Page 233: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/233.jpg)
5.3.2 Multimedia Editorial Tools
5.3.2.1 Multimedia Interface for Broadcasting Operation Systems
The broadcasting operation system (see Figure 5.3 above) allows a synchronisedbroadcast of audio and associated information. The capturing and administration ofmulti-media content requires an expansion of the existing audio database model.During hard-disk recording of the audio takes, any multimedia content (i.e. CDcovers, pictures of artists or advertising pictures) can be stored in the databaseand combined with the associated audio parts. The recommendation [IRT, 1999] (seeTable 5.4) has the same approach for multimedia content as the ‘Funkhaustelegramm’for text information. The MOT interface ensures a synchronised handling of multi-media information in the data inserters or web servers. Therefore, the broadcastingoperation systems have to create a dBaseIII-compatible file, containing the MOTobjects, which is read by the data inserters. The interface guarantees a fixed connectionto the programme schedule. Every change in the play list is recognised by the datainserters.
The MOT interface is designed to store information ahead, over n titles or nminutes. It is the decision of the editor responsible to configure the associatedinformation ahead of/or contemporaneously to the audio item. In the first case, thetrigger time of the object, included in the MOT header, is set according to the playlist time. In the second case, the trigger time is set to ‘now’. This means that theMOT object will appear in the receiver immediately after transmission.Furthermore the MOT interface contains directory information for the objectsand parameter files. This information indicates the archive file location. Theparameter files contain pre-encoded MOT information (e.g. file size, object type,service manner). During the insertion process the PAD inserter requires allinformation.
Table 5.4 MOT interface for broadcasting operation systems
Name Type Length Description
DATE Date � DateTIME Char 8 Start timeTITLE Char 36 Title
ARTIST Char 24 ArtistH Num H 6 Length in hoursMIN Num H 6 Length in minutes
SEC Num H 6 Length in secondsPARFILE01 Char 60 Path and file name of the parameter fileMOTFILE01 Char 60 Path and file name of the MOT object file. . . . . . . . . . . .PARFILE10 Char 60 Path and file name of the parameter fileMOTFILE10 Char 60 Path and file name of the MOT object file
Provision of Services 205
![Page 234: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/234.jpg)
5.3.2.2 Authoring Tool ‘DAB Slide Show’
The ‘Slide Show’ application consists of sequences of JPEG or PNG pictures. A simpleform of this service is the presentation of CD covers or web camera pictures. In theeditorial tasks there is the desire to mix single content sources to provide an attractiveservice. Based on this desire, the German broadcaster ‘Westdeutscher Rundfunk’ devel-oped a special application software named ‘PAD-Projector’. This allows the configura-tion of programme categories, such as weather, traffic, music or advertising. Everycategory consists of a picture and a text layer. The picture layer allows easy recognitionof the topic by the use of pictograms. The text layer consists of actual information. Bothlayers are stored in a JPEG file and transmitted to the data inserters or web servers. Thesettings allow the configuration of default pictures (in the case of no available actual textcontent), the JPEG compression rate, the duration and the order of the slides.
5.3.2.3 Encoded Traffic Information (TMC, TPEG)
The objective of encoded traffic information is to avoid disturbances of formattedradio. Monotonous announcements and a large stock of messages have a negativeinfluence on modern programme making with fixed speech/music portions and uni-form programme flow. The objective of an exclusive coverage with encoded trafficinformation is, today, due to less market penetration with suitable receivers far away.Nevertheless it is important now for broadcasters to build up the necessary infra-structures to compete in future with other content traffic information bearers, likemobile telephone systems.
The RDS TMC services generated by traffic information systems currently provide aregular service in European countries. Car navigation systems are using RDS TMC forfree updating of traffic status. Therefore, for identical coverage of the existing RDSmarket a TMC provision in DAB is essential. TMC was designed for transport in anarrow-band RDS data channel and because of that the standard is restricted for futureexpansion. Founded by the European Broadcasting Union (EBU), an independentexpert group TPEG (Transport Protocol Experts Group) is still developing a standardfor the transmission of traffic and transport information within DAB, DVB and theInternet (see also section 4.6).
5.3.2.4 Multimedia Database
A multimedia database is available for instance at the IRT for central contributionand distribution of multimedia content. The database is designed as an SQL databasesupported by PHP3 and JAVA scripts running on LINUX or WindowsNT�servers.The input scripts are adapted for single editorial applications and convert the arriv-ing documents (DTP document, email) into a uniform database format. The outputscripts can be optimised to the bearers (Internet, DAB, WAP, DVB) and provideapplications like HTML, ‘Slide Shows’ or WML (Wireless Mark-up Language). Theauthoring tools are run easily with Internet browsers. The aim is to develop agrowing multimedia toolbox for new broadcasting media with tools from theInternet market.
206 Digital Audio Broadcasting
![Page 235: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/235.jpg)
5.3.3 Data Inserter
Broadcasters and DAB network providers are inserting data services into the DABmultiplex with different system solutions. Described below are basic principles of DABdata service insertion following the developments by the Institut fur Rundfunktechnikfor the German public broadcasters.
The primary function of the data inserter is to encode data service content coming fromstudio sources to the transmission protocol in a given DAB data channel. The inserterprocesses the data according to the given transmission cycles [TR 101496] and finally fedsall ancillary data streams into the DAB multiplex.
The DAB data inserter consists mainly of three parts (see Figure 5.5)
• Fast Information Channel (FIC) inserter,• Programme Associated Data (PAD) inserter,• Packet Mode inserter
5.3.3.1 FIC Inserter
Service Information (SI) provides supplementary information about services, bothaudio programme and data. Generally, SI is encoded in the Fast InformationGroups (FIGS) of the Fast Information Channel (FIC) and has a static or dynamic
DAB-Ensemble
SI
PAD Packet ModeMPEG1-Audio
RS232 X.21RS232
STI-D
FIG-Generator Packet ModeF-PAD X-PAD
MOT TPEGDLS
BWS
TMC
FIC
FIDC
ASW PTY
MCI
PAD
SLS EPG TopNews
Sub-Ch Sub-ChMSC
STI-D
DAB Multiplexer
DAB Data Inserter
ANC. Data Manger
UECP/FHT
Content Management System
Figure 5.5 DAB data inserter
Provision of Services 207
![Page 236: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/236.jpg)
character, depending of the SI type. Dynamic FIC information includes for instanceAnnouncement Service Switching (ASW), Programme Type (PTY) or TMC trafficdata which are transported in the Fast Information Data Channel (FIDC). Staticinformation like Programme label, Announcement support, time and country IDare signalled separately in the control software of the service or ensemblemultiplexer.
To ensure a universal provision structure in broadcasting houses for dynamic ancillarydata, the FIC inserter uses as input protocol the so called ‘‘Funkhaustelegramm’’ or theUniversal Encoder Protocol (UECP). Additional parameters like Service provider ID,Service ID, Sub-channel ID and Cluster ID of each service are configured in the datainserter software.
The input buffer of the FIC inserter stacks the studio information and prioritisesit to ensure a rapid sending. The SI is encoded as Fast Information Groups (FIG)and transported in STI-D format over a serial RS232 interface to the connected serviceor ensemble multiplexer. A cyclic repetition of the FIG data, according to the DABGuidelines of Implementation, ensures error-free and quick recognition at thereceiver.
5.3.3.2 PAD Inserter
Each DAB audio frame contains a number of bytes which may carry ProgrammeAssociated Data (PAD). PAD is information which is synchronous to the audioand its contents may be intimately related to the audio. The PAD inserter (seeFigure 5.6) encodes the service content from the ancillary data manager (textinformation) or from content management systems (multimedia) into the PAD
Anc. DataManager
PADRS232
FHT-RS232
Text FilesLAN
HTML FilesLAN
MOT FilesLAN
OnlineCentre
STIX.21
Service Multiplexerincl. Audio encoder
F-P
AD
and
X-P
AD
Pro
cess
ing
Dyn
amic
Labe
l
SLS-Mode
CAR-Mode
Configuration andControlling
JPEG FilesLAN
BWS-Mode
Text-Input
FHT-Input
MO
T
PA
D F
ram
e T
rans
port
Figure 5.6 PAD inserter (IRT)
208 Digital Audio Broadcasting
![Page 237: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/237.jpg)
information types and transmits the PAD frames to the audio encoder via serialRS232 interface.
The DAB standard provides several PAD data services types (see section 5.3.2.1). Inmost DAB projects in Europe the applications Dynamic Label (DLS), MOT BroadcastWeb Site (BWS) and MOT Slide Show (SLS) are used. Figure 5.5 illustrates thefunctionality of the PAD inserter with input interfaces for text and MOT objects.Typical PAD data rates are 8 or 16 kbps – in principal also data rates up to 64 kbpsare possible.
5.3.3.3 Packet Mode Inserter
The Packet mode is defined for the purpose of broadcasting several data servicesusing for instance the MOT or TPEG transmission protocol into a single sub-channel. The Packet mode inserter (see Figure 5.7) provides different service para-meters to indicate the data service type, the network directory to receive the servicecontent as files or streams and the packet address of the single sub-channel. Inorder to allow a rapid transmission of data services which consist of a high numberof data files further parameters for the data carousels are adjustable. For instanceto maintain fixed sequences of file types or to prioritise certain content for trans-mission. Data rates for the packet mode sub-channel shall be multiples of 8 kbps.Typical data rates are from 8 up to 64 kbps. Packet mode data may be carried indata groups. A single data group consists of 8191 bytes and is transmitted in one ormore packets.
Ensemble- /Service-Multiplexer
Real timeTCP/IP-Socket
Configuration, Controlling andMonitoring
HTML-mirroring
ftpmirroringLAN
ftp
Provider 2ETISTI
DGPS
Provider 1 Remote-Controlling
STIX.21
Sub
-Cha
nnel
Tra
nspo
rt
Pac
ket M
ode
Dat
a P
roce
ssin
g
Con
vers
ion/
Syn
tax
Che
ck/S
tora
ge
MO
T-P
roto
col/C
ondi
tiona
l Acc
ess
Inpu
t-In
terf
aces
/Pas
swor
d-Lo
gin
Figure 5.7 Packet mode inserter (based on the Multimedia Data Server of FhG-IIS)
Provision of Services 209
![Page 238: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/238.jpg)
5.4 Relationship between DAB Data Services and RDS
Some special features such as data services or other ancillary information are alreadybeing used in conventional radio services. One very well-known service is the RadioData System RDS [EN 50067]. It is important to consider aspects of the implementa-tion of the RDS and DAB systems which are directly related to each other to ensure asconsistent and compatible an approach as possible. In other words, it is important toexamine how the various features of both systems can best be implemented both bybroadcasters and in a receiver to allow a user to benefit The listener must be able toaccess services and features in a similar manner regardless of whether tuned to eitherFM/VHF or DAB.
5.4.1 DAB SId versus RDS PI Code
Both Programme Identification (PI) codes in RDS and Service Identifier (SId) codesin DAB use a 16-bit code to identify audio services. Although the code structure mayappear identical in RDS and DAB, usage of the code in terms of allocation andbroadcaster and receiver implementation differs in the two systems, as illustrated inTable 5.5.
If RDS and DAB services carry the same programme at all times, common PI andSId codes may be allocated (SId¼PI) and the SId code allocation will be constrainedby the same rules as for RDS codes. The receiver can treat a common code as animplicit hard link. Service following between DAB and RDS can be done in this case
Table 5.5 Differences between RDS PI and DAB Sid
RDS PI DAB SId
The second nibble of the 16-bit PI coderepresents the coverage area of the RDS service
(Local, International, National, Supra-regional,or one of 12 Regions). This imposes constraintsupon free PI code allocation. Services with PIcodes that are identical in the first, third and
fourth nibbles are implicitly regional equivalentservices, i.e. they are ‘‘soft-linked’’.
The second nibble of the 16-bit SId code has nospecial significance, and there is no ‘‘soft
linkage’’ implied between any two SId codes.‘‘Soft linkage’’ is explicitly given by means of thelinkage feature (FIG 0/6) by using commonLinkage Set Numbers (LSNs).
Regional RDS services often use separate codeswhen originating their own programmes, but
transmit a common PI code during sharedprogramming. Broadcasters who vary PI codesin this manner are unable to provide identical
codes on DAB and RDS even though serviceswill at times be carrying identical audio.
For regional services SId codes must remainunchanged and be allocated unique codes, even
if RDS services change their second nibbleduring common programming (in DAB SIdcodes must remain invariant). In this case, as a
consequence, in any region the PI code and SIdcode will be different even though programmesare simulcast. A DAB service is explicitly linked
to regional equivalent services using linkage.
210 Digital Audio Broadcasting
![Page 239: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/239.jpg)
without using the linkage mechanism. A receiver may use services with identical codesas alternative sources of the same programme. If at any time it is likely that differentprogramming is carried on RDS and DAB, then different PI and SId codes must beallocated. In this case following between RDS and DAB can only be done by makinguse of the linkage feature.
To follow between RDS andDAB services without using linkage, the followingmay benoted: a receiver, on seeing that the RDS PI code has a second nibble of either ‘2’ or ‘3’,will know that all regions are carrying a common programme. Hence a switch is allow-able to any RDS or DAB service whose PI or SId code is identical in the first, third andfourth nibble and where the generic (EG) flag is set.
5.4.2 Programme Type Codes
The Programme Type (PTy) feature in DAB has been designed to give improvedfunctionality compared to the Programme Type code (PTY) in RDS. Consequently allrelated features or possibilities in DAB are not available in RDS.
Table 5.6 illustrates the differences between PTY (RDS) and PTy (DAB). In DAB it ispossible to transmit PTy codes to represent both the static (service format) and dynamic(actual on-air programme item type) simultaneously. For both static and dynamic codes,up to two codes may be used. For each of the static and dynamic codes, at least one ischosen from the same international code range as used for RDS. The second, if used, maybe chosen from this same set, or from the additional range of 32 coarse codes.
5.4.3 Announcements in DAB versus TA in RDS
Table 5.7 shows the differences between the Announcement feature in DAB and TrafficAnnouncement (TA) in RDS.
In RDS some dynamic PTY codes are used as fallbacks for DAB announcement types.Table 5.8 illustrates the coding of programme items intended to cause vectoring to a shortaudio message or ‘announcement’.
Some broadcasters may choose to use the announcement categories ‘News flash’ and‘Area weather flash’ instead of, or in conjunction with, programme types ‘News’ and‘Weather’ respectively. As a consequence, in DAB, PTy codes 01 and 16 may be used forlonger as well as shorter programme items, and in addition may be combined with alanguage filter code.
5.4.4 Dynamic Label in DAB versus Radiotext in RDS
Both RDS and DAB have the ability to carry text messages from the broadcaster to thelistener’s receiver. Although designed for the same purpose, Radiotext in RDS andDynamic Label in DAB have a number of differences, see Table 5.9. In particular,control code use is different. There is a possibility to harmonise the usage to allow bothbroadcasters and receiver designers to implement the same text handler routines andachieve acceptable results and presentation on both systems.
Provision of Services 211
![Page 240: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/240.jpg)
Displays, which rely upon scrolling the text to show the complete message, shouldapply intelligent routines to present the message in the best possible way. Receivers couldremove unnecessary spaces inserted by the broadcaster as ‘padding’, before display, toprevent scrolling through strings of blank spaces. If the resultant text length is shorterthan, or equal to, the number of characters in the display, the display could show themessage statically, without scrolling. Although the primary responsibility for presenta-tion rests with the receiver manufacturer, broadcasters need to have a basic knowledgeabout the way Dynamic Label and Radiotext messages are being treated in receivers.
It is therefore up to the broadcasters to ensure that the data stream transmitted doesnot cause undesirable effects on older generations of RDS receivers. The receiverdesigner is responsible for ensuring the optimum presentation of the text, appropriateto the size and type of display chosen.
Table 5.6 Differences between PTy in DAB and PTY in RDS
PTy in DAB PTY in RDS
Besides of the basic set of 30 internationallyagreed Pty codes a further set of 32 coarse codes
and up to 256 PTy fine codes are available tocategorise the programme content.
A list of 32 internationally agreed PTYcodes is available to categorise the
programme content.
Up to eight PTy codes can be allocated at thesame time to a programme service.
A single PTY code only can be allocated to aprogramme service.
PTy codes can be signalled for the selected
services and for other services via the PTy andother ensembles PTy feature.
PTY codes can be signalled for the selected
service as well as for another service viaEON (Enhanced Other Network).
PTy fine codes allow finer sub-divisions of someof the PTy coarse codes and can be used to
watch for more specific programme types (e.g.‘‘Tennis’’ instead of ‘‘Sport’’). To preserve asmuch compatibility as possible, the DAB ‘‘fine’’code should match the RDS PTYN description
as much as possible.
There are no PTY fine codes in RDS but theProgramme Type Name (PTYN) allows a
broadcaster to transmit a short eight-character description to describe theprogramme content. The characters aretransmitted over the air, and cannot be used
for PTY Search or Watch functions.
PTy language allows PTy selection based onlanguage criteria (e.g. ‘‘News’’ in ‘‘Swedish’’).
PTY language is not supported in RDS.
PTy downloading allows new codes to bedefined ‘‘over the air’’. For PTys which are notagreed internationally, an accurate descriptioncan be provided. It also allows the description
of PTy codes to be translated into any desiredlanguage.
PTY downloading is not supported in RDS.
PTy preview signals which PTy codes are likelyto be used in the next one or two hours. This
assures the listener whether a WATCH requestis likely to succeed or not.
PTY preview is not supported in RDS.
212 Digital Audio Broadcasting
![Page 241: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/241.jpg)
5.4.4.1 Control Codes
A number of control characters, which the broadcaster may choose to insert in the textstring, have been defined to create a particular effect on certain displays. As some of thesecontrol codes were not defined in the original RDS specification, some older RDSreceivers may not be able to respond to these codes in the correct way. Most first-generation RDS receivers will substitute a space for these control codes.
Table 5.7 Comparison between announcements in DAB and TA in RDS
DAB RDS
16 announcement categories can be coded,
of which 11 are currently defined.Announcement types are treated in adifferent way as vectored PTys in WATCHmode, whereas dynamic PTys are scheduled,
announcements are unscheduled and usedfor short vectored interrupts.
InRDS only one announcement type (TA) is
defined. The dynamic use of PTy codes 01(News) and 16 (Weather) is often used toprovide similar functionality toannouncements in DAB.
Announcements are based on the clusterconcept. They can be targeted to specific
regions and feature a ‘‘New’’ flag, which isvaluable in the case of a cyclicannouncement channel. In the receiver
announcements can be filtered according tothe intended region.
TAs (or dynamic PTYs) with clusteroperation is not supported in RDS.
A ‘‘New’’ flag is not supported in RDS.
Regional filtering of TAs is not supported in
RDS though TAs from regional stations willinherently be regional.
Table 5.8 Coding of programme items intended to cause vectored interrupts
Description Coded in DAB as: Coded in RDS as:
Alarm Anno flag b0 Dynamic PTY 31
Road Traffic Anno flag b1 TP/TAPublic Transport Anno flag b2 TP/TAWarning/Service Anno flag b3 Not available
Alarm Test Not available Dynamic PTY 30News Anno flag b4 Dynamic PTY 01Weather Anno flag b5 Dynamic PTY 16
Event Anno flag b6 Not availableSpecial Event Anno flag b7 Not availableProgramme Information Anno flag b8 Not availableSport report Anno flag b9 Dynamic PTY 04
Financial report Anno flag b10 Dynamic PTY 1 7Reserved for future announcement types Anno flags b11–b15 Not available
Provision of Services 213
![Page 242: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/242.jpg)
a) Control code ‘0B’Control code 0B is used to indicate the end of the portion of text the broadcaster hasdesignated as the ‘headline’. The headline is a portion of the text meant for display in afixed format containing information that does not require frequent updating and thatis safe for viewing by driving motorists. It is physically sent as the first portion of themessage and comprises all characters up to, but not including, control code 0B. If aheadline is present, the ‘body’ is the part of the text excluding the headline and controlcode 0B. In compiling messages, the broadcaster ensures that the headline portionmust be capable of standing alone, and that the complete message must make sense.The body may not necessarily make sense on its own. Receivers may choose todisplay:
• only the headline portion of the message; or• the complete message with headline portion enhanced or differentiated; or• the complete message without regard to the headline status;• but not the body of the message alone.
If 0B occurs in the current message, it defines the headline, which comes into effectimmediately. If no 0B occurs in the current message, there is no headline in effect.If 0B occurs in position ‘0’ no headline is defined. The headline starts in position‘0’ and runs until the position preceding code 0B. Its effective length must notexceed 32 displayable characters. The occurrence of code 0B and hence of theheadline is optional.
The content of the headline should not be changed more often than is compatible withroad safety requirements. This does not impose restrictions upon the content of the bodyof the message which can be updated more frequently, nor on the repetition rate of theheadline.
In the usual case where the broadcaster intends a space between the headline and bodyparts of the message, a space character must be explicitly transmitted.
Table 5.9 Differences between Radiotext in RDS and Dynamic Label in DAB
RDS Radiotext DAB Dynamic Label
Supports a 64-character message. Supports a 128-character message.
8-character displays on some older receivers. Wide range of displays from 1 � 1 6 or 2 � 16
characters, LCD screens and PC monitors
Multiline displays should use normalword-processing techniques to provide wordwrapping to show the message completely.
Because of the wide range of display typespossible, it is up to the receiver manufacturer todevelop software to optimise the presentation for
the particular display chosen. Multiline displayswill need to accommodate more than 128characters to allow for word wrapping to show
the message completely.
214 Digital Audio Broadcasting
![Page 243: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/243.jpg)
• In the case of DAB receivers and compatible RDS receivers: When no headline isavailable, the receiver designer must decide upon the appropriate actions. Code 0Bdoes not occupy a space in the displayed message. Code 0B, when ignored by thereceiver (because no headline display mode is supported), does not represent a space.As the body text may not make sense on its own, it must not therefore be presented inits own right.
• In the case of first-generation RDS Radiotext receivers: As code 0B was not defined inthe original RDS specification, some older RDS receivers may not be able to distin-guish between the headline and body portions of the message. They may displayheadline and body as a single text string. Most receivers will substitute a space for0B. Broadcasters who include code 0B in their Radiotext messages must be aware ofthis behaviour.
b) Control code ‘0A’: preferred line breakControl code 0A is used to indicate positions in the message where the author of thetext would prefer a line break to occur to structure the text in a particular way.
When control code 0A is used in the headline portion of the text, it indicates theposition at which a receiver, using a two-line, 16 characters per line display, shouldpreferably break the headline. In the case of a larger format display, the receiver maychoose to ignore it.
If code 0A occurs in the headline, then the sum of displayable characters must be lessthan or equal to 31 (because a receiver equipped with a 1� 32 character display formatwill insert a space character in place of the control code).
Code 0A must not occur more than once in the headline portion of themessage, and may not be used if a 1F (preferred word break) is also used inthe headline portion.
• In the case of DAB receivers and compatible RDS receivers: If a receiver uses a one-line,32 character display to present the headline portion of the text, code 0A within theheadline, if used, is replaced by a space in the display and not used to create a linebreak. If a receiver uses a 2� 16 character display to present the headline portion of thetext, the character string before code 0A is displayed in the first 16-character block; 0Acodes are transmitted to aid a receiver to structure the display of the message opti-mally. Code 0A is replaced by a space in the display when not used to create a linebreak.
• In the case of early RDS RT receivers: Since code 0A was not defined in the originalRDS standard, some older RDS receivers may not be able to use it to create a linebreak if desired. Most of these receivers will substitute a space for code 0A.Broadcasters including 0A in their Radiotext messages should be prepared tospecifically transmit a space character in conjunction with code 0A to preventunintentionally joining together the two words either side of the 0A code on certaindisplays.
c) Control code ‘1F’: preferred word break (soft hyphen)Control code 1F indicates the position(s) in long words where a receiver shouldpreferably break a word between multiline (non-scrolling) display lines if there is aneed to do so.
Provision of Services 215
![Page 244: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/244.jpg)
For example: If control code 1F is used in the headline portion of the text, itindicates the position at which a receiver using a two-line, 16 characters per linedisplay should preferably break the long word. If code 1F occurs in the headline, itdivides the headline in such a way that neither sub-string contains more than 16displayable characters.
Code 1F must not occur more than once in the headline portion of the message,and may not be used if a code 0A (preferred line break) is used in the headlineportion.
• In the case of DAB receivers and compatible RDS receivers: Code 1F, when used by areceiver as a word break, is replaced by a hyphen followed by a line break, otherwise itis ignored and does not represent a space.
• In the case of early RDS RT receivers: Devices produced to the original RDS specifica-tion [EN 50067] are unable to use it to create a word break. Most of these receivers willsubstitute a space for code 1F, so that words will be unintentionally split at the point ofthe 1F. For this reason, broadcasters may decide that use of code 1F is inappropriatefor Radiotext.
d) Control code ‘0D’: end-of-textControl code 0D is used in RDS to indicate the end of the current message. It isused to help RDS receivers identify the actual length of the current message if it isless than the maximum 64 characters possible. DAB receivers do not use thiscontrol code.
Code 0D can appear only once in a message. Positions after code 0D should bedisregarded and should not be transmitted or filled by spaces.
• In the case of DAB receivers and compatible RDS receivers: Code 0D and any char-acters or codes in all the following positions are ignored.
• In the case of first-generation RDS RT receivers: Since control code 0Dwas not definedin the original RDS specification, some older RDS receivers may be unable to use it.Most of these receivers will substitute a space for code OD, others may delete it fromthe string.
5.4.5 Cross-referencing DAB Services from RDS
It is likely to be a number of years before DAB coverage equals that of FM radio. Duringthis period when DABwill be unavailable in all areas or for all services, it is assumed thatreceivers, especially vehicle receivers, will be able to tune to both DAB and FMtransmissions.
SinceDABprovides superior quality reception to FM, it should be the preferred choicefor listening where available. Receivers may switch across from FM to DAB as soon aspossible after entering a DAB served area if the DAB tuner knows in which ensemble,and on what frequency, the required service may be found.
The DAB cross-reference feature defines how to signal DAB frequencies within theRDS format to achieve a fast and effective way for a combined RDS/DAB receiver to getaccess to alternative programme sources in DAB transmissions.
216 Digital Audio Broadcasting
![Page 245: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/245.jpg)
5.4.5.1 ETSI Standard EN 301700
The European standard [EN 301700] describes the way that DAB service informationcan be provided from RDS by using an Open Data Application (RDS-ODA; theRDS Forum allocated the number AID¼ ‘147’) allowing a receiver to find anequivalent DAB service. The ODA allows a service provider to signal not onlyfrequency and transmission mode information about DAB ensembles but also link-age information and ensemble information about DAB services. This informationcan be used by a receiver to perform service following from RDS to DAB. The ODAuses an RDS type A group so that there are 37 bits available for coding. One bit isused for the E/S flag to differentiate between data for the ensemble table and datafor the service table. The remaining 36 bits are used to express ensembles in terms offrequencies and modes, or services in terms of ensembles and service attributes (PTy,LSN, etc.).
This information will enable the tuner:
• to find the location of DAB ensembles;• to find where the current RDS service is on DAB;• to find a list of other DAB services;• to know some of the attributes (PTy, LSN) of DAB services.
5.4.5.2 Relationship between DAB Services, Ensembles and Frequencies
In RDS, there is a single relationship: a service is carried on one or a number offrequencies. The RDS system allows a service provider to send all the frequencies onwhich the service is available to RDS receivers. The RDS receiver can build up a list ofalternate frequencies (AF) which allows one (when mobile) to find the best frequency forthat service. The RDS system also allows other service information to be provided, and,through the Enhanced Other Network (EON) feature, this can be extended to other RDSservices.
In DAB the situation is different in that services are carried within ensembles.A given service may be carried in one or more ensembles and each ensemble may becarried on one or more frequencies. A DAB receiver is therefore required tomaintain two tables, one listing ensembles and attributes for each service (ServiceTable), and a second, which lists frequencies and mode for each ensemble (EnsembleTable).
The requirement for cross-referencing fromRDS is to deliver data to the DAB receiverto allow these tables to be constructed.
5.4.5.3 Ensemble Table
The ensemble table contains the basic information required for service following:
• the Ensemble Identifier (EId);• the DAB transmission mode;• the centre frequency of the DAB ensemble.
Provision of Services 217
![Page 246: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/246.jpg)
Reception of the ensemble table does not mean that the tuned RDS service is carriedon that ensemble. The purpose of the ensemble table is to allow the receiver to buildup information about DAB ensembles. To locate an equivalent DAB service forservice following requires that the receiver tune to each ensemble and inspect theservice linking information. This task can be simplified by using the service table (seesection 5.4.5.4).
Table 5.10 illustrates the ensemble table format. The EId being referenced occupies thelast 16 bits in block 4. The preceding 16 bits in block 3 are used to signal the frequencycode. In block 2, 2 bits are used to indicate the transmission mode.
NOTE: In [EN 300401] the centre frequency of an ensemble is coded as an unsignedbinary number in a 19 bit field, allowing a range from 16 kHz to 8388592 kHz. As in thisODA only 18 bits are available, the frequency range will be limited from 16 kHz to4194288 kHz.
A transmission of this RDS group is required for each EId and for each differentfrequency. Once all frequencies have been broadcast for a particular EId, another EIdwith its list of frequencies may then be broadcast. Every group is complete in its ownright, and data are usable directly, without reference to any other group.
5.4.5.4 Service Table
The service table provides additional information about services available on DAB. Itallows a receiver to get information via the RDS-ODA rather than having to examineeach DAB ensemble for FIC information. Variant 0 allows the receiver to build up a listof ensemble identifiers that a service is available on, and variant 1 allows the linkageinformation for the DAB service to be stored. The service provider will signal everyensemble that a service is carried in before signalling the other attributes for that service.Once all the information is signalled for one service, the information for the next servicemay be signalled, and so on.
Table 5.11 shows the service table format. The SId being referenced occupies the last 16bits in block 4. The preceding 16 bits in block 3 are used to transmit the list of Ids and allother required attributes of that service. The use of these 16 bits is indicated by the variantcode that occupies the last 4 bits in block 2.
Table 5.10 Ensemble table format
PI code (16 bits inblock 1)
Mode field (2 bitsin block 2)
Frequency field (16 bits inblock 3+2 bits in block 2)
Eld field (16 bits inblock 4)
(PI code of tuned
RDS station)
00=unspecified
01= mode I10=mode II or III11¼mode IV
centre frequency of the DAB
ensemble in the range16 kHz–4194288 kHz
Eld of the DAB
ensemble to whichtransmission modeand frequency apply.
218 Digital Audio Broadcasting
![Page 247: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/247.jpg)
A transmission of this RDS group is broadcast for each SId for each different EId.Once all EIds have been broadcast (using variant 0) other variants are transmitted todescribe the other attributes for that particular SId. Other services may then bebroadcast, each with its own list of EIds and service attributes. Every group iscomplete in its own right, and data are usable directly, without reference to anyother RDS group. The transmission of the service table information is optional butwhen it is transmitted then both variant 0 and variant 1 information should bebroadcast.
5.4.5.5 Operational Requirements
In order for the (RDS) receiver to know which application decoder to use and whichgroup type is being used for carrying the ODA (Open Data Applications) data, theservice provider must transmit two type 3A groups per minute.
If a service provider has many services carried on DAB in many ensembles up totwo groups per second may be required to transmit all the application data. Theensemble and service table carousel may be interleaved but data will be transmittedin sequence within each carousel. All the ODA data will be transmitted within twominutes.
As already explained in section 5.4.5.3, application data from the ensemble table aretransmitted such that all data for one ensemble are broadcast before data for the nextensemble are broadcast. As shown in section 5.4.5.4, application data from the servicetable are transmitted such that all data for one service are broadcast before data for thenext service are broadcast. All ensemble information (carried in variant 0) relating to oneservice is broadcast before other data (carried in other variants) relating to that serviceare broadcast.
For service following it is recommended that the receiver use the linkage informationprovided via RDS for the RDS service and via DAB for the DAB service to link betweenequivalent services. This means that basically only the ensemble table needs to betransmitted. However, single front-end receivers have to use the linkage informationprovided via RDS for both the RDS and the DAB service, and therefore both the
Table 5.11 Service table format
PI Code (16 bits in
block 1)
Variant (4 bits
in block 2)
Information Block (16 bits in
block 3)
SId (16 bits in
block 4)
(PI code of tunedRDS service)
(0–15) variant 0: Ensemble information:Eldvariant 1: Linkage information:
Linkage Actuator (LA), Soft orHard link International LinkageSet (ILS), Linkage Set number(LSN), Rfu
SId of the DABservice to whichthe information
block data applies.
Provision of Services 219
![Page 248: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/248.jpg)
ensemble table and the service table should be transmitted. The linkage information isprovided either explicitly by RDS type 14A groups and DAB FIG type 0 extension 6 (seesection 5.4.2) or implicitly when the RDS PI code and DAB SId are identical (seesection 5.4.1).
5.5 Electronic Programme Guide (EPG) for DAB
5.5.1 General
The Electronic Programme Guide (EPG) provides a means for a broadcaster topromote their radio station and the content on it to a wider audience. An EPG istypically an electronic version of a printed programme guide, presenting the userwith a short summary of programmes that are currently broadcasting and thatwill be broadcast over the next few days, across a number of radio stations. Assuch, the EPG is an important tool for radio stations, encouraging listener loyaltyand attracting new listeners by providing a mechanism for supplying visual infor-mation about the current programme, and forward promotion of futureprogrammes.
A number of DAB receivers support the EPG standard. Figure 5.8 illustrates thetypical information that is presented to a user who is tuned to a radio station carryingEPG information. The user is able to review the programmes broadcasting on that radiostation and discover additional information about the individual programmes. Some
Figure 5.8 A Pure Evoke-3 DAB receiver displaying EPG information. Reproduced by permission
of � James Cridlind
220 Digital Audio Broadcasting
![Page 249: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/249.jpg)
receivers, such as the Pure Evoke 3, enable the listener to use the information containedwithin the EPG to aid time-shift recording of future radio programmes; navigatingthrough the programme list, they can choose the individual programmes and seriesthey wish to record.
5.5.2 Development of the DAB EPG
In early 2001, WorldDMB [www.worlddab.org] set up a task force to define anopen standard for a DAB EPG. From the outset the group agreed a number offundamental key objectives, in order that the DAB EPG would meet all customerexpectations:
• Display of radio schedules at varying levels of detail across a range of receivers.• Descriptions of services and programmes.• Selection of services and programmes by the receiver, and link to related content.• Selection of services and programmes for recording at a given time by the receiver.• Support both audio and data services.
It was also important that however listeners consumed radio (whether it was on ahi-fi, portable, car-radio or PC-based receiver) the EPG should be available tothem.
From these objectives, WorldDMB produced a pair of specifications for the EPG thatwere published by ETSI in 2005 [TS 102818] and [TS 102371].
5.5.3 Data formatting
The formatting of the EPG data is important in that it has to offer the flexibility to workon a range of receivers with differing displays, resources, storage and connectivity.Ideally, it should also be backwards compatible to future XML specifications, easy todecode and efficient.
The DAB EPG uses Extensible Markup Language (XML) [W3C 2000], with thestructure and content of the XML documents defined using XML Schema’s. XML isideal for this application as:
• Many applications and APIs already exist for manipulating XML.• XML parsers are freely and readily available (which is useful for content import and
export).• XML also offers future expandability and backwards-compatibility; a well-designed
XML application can be updated in the future without breaking any previous systems.
The last point in particular is important in the case of the EPG, where there are anumber of potential future applications that may draw on this specification, butwhich were unknown at the time the first version of the specifications waspublished.
Provision of Services 221
![Page 250: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/250.jpg)
The structure of the EPG is outlined in Figure 5.9. There are three main elements:
• Service information: This contains information relating to the ensembles and theservices on those ensembles.
• Schedule information: This contains information about programmes and timed eventsthat occur within those programmes and a reference to the service (or services) onwhich they broadcast.
• Group information: This enables programmes and events to be linked together intogroups, such as serials or series. Additionally groups may also be linked to other
Information about an esemble
Information about a service and a link to the ensemble it broadcasts on
Information about a schedule for one or more services
Information about a programme and a link to its service
Information about an event and its programme
Information about a group
Information about a group and links to parent groups
A programme links to its parent groups
…
ENSEMBLE
SERVICE
SCHEDULE
PROGRAMME
EVENT
GROUP
GROUP
PROGRAMME
Service information
Schedule information
Group information
Figure 5.9 Structure of the EPG XML
222 Digital Audio Broadcasting
![Page 251: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/251.jpg)
groups. For example, a programme called ‘The Ultimate Radio Quiz’ may be amember of the series group ‘The Ultimate Radio Quiz Series’. This ‘The UltimateRadio Quiz Series’ group could then be a member of the ‘Quiz Programmes’ group,which links together all of the programmes on the EPG that relate to quizzes.
A typical XML schedule file for a single programme is shown below:
<?xml version=‘1.0’ encoding=‘UTF-8’?><epg xmlns=http://www.worlddab.org/schemas/epgSchedule/14
xmlns:epg=http://www.worlddab.org/schemas/epgDataTypes/14
xmlns:xsi=http://www.w3.org/2001/XMLSchema-instance
xsi:schemaLocation=http://www.worlddab.org/schemas/epgSchedule/14
epgSchedule_14.xsd system=‘DAB’
xml:lang=‘en’><schedule version=‘1’ creationTime=‘2001-02-28T00:00:00’originator=
‘BBC’><scope startTime=‘2001-03-01T00:00:00’ stopTime=‘2001-03-
02T18:00:00’><serviceScope id=‘e1.ce15.c221.0’/></scope><programme shortId=‘213456’ id=‘crid://bbc.co.uk/4969758988’recommendation=‘yes’>
<epg:mediumName>Gilles Peterson:</epg:mediumName><epg:longName>Gilles Peterson: Worldwide</epg:longName><epg:location><epg:time time=‘2003-12-18T00:00:00’duration=‘PT2H0M0S’actualTime=‘2003-12-18T00:00:00’actualDuration=
‘PT2H0M0S’/><epg:bearer id=‘e1.ce15.c221.0’ trigger=‘c2213ac1’ /></epg:location><epg:mediaDescription><epg:shortDescription><![CDATA[Gilles Peterson brings youtwo hours of global beats and the best of cool. Including the
Worldwide family. KV5 are live from Maida Vale with special
guests.]]></epg:shortDescription><epg:multimediamimeValue=‘image/png’url=‘http://www.bbc.co.uk/radio1/r1_gilles.png’ /></epg:mediaDescription><epg:genre href=‘urn:tva:metadata:cs:ContentCS:2002:3.6.7’><epg:name><![CDATA[ Rap/Hip Hop/Reggae]]></epg:name></epg:genre><epg:genre href=‘urn:tva:metadata:cs:ContentCS:2002:3.6.8’><epg:name><![CDATA[ Electronic/Club/Urban/Dance]]></epg:name></epg:genre><epg:memberOf shortId=‘1000’id=‘crid://www.bbc.co.uk/WorldwideGroup’/><epg:link url=‘mailto:[email protected]’
Provision of Services 223
![Page 252: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/252.jpg)
description=‘Email:’/><epg:link url=‘http://www.bbc.co.uk/radio1/urban/peterson/’description=‘Web:’/>
</programme></schedule></epg>
The example above highlights a number of the key features of the specification:
• ‘Link’ enables broadcasters to link to additional information not transported withinthe EPGdata stream (for example links to websites, wapsites, or content transported inother DAB data channels), as well as enabling listener interaction through email andSMS links.
• ‘mediaDescription’ enables the broadcaster to add additional multimedia content suchas images, video or audio clips to programmes.
• ‘xml:lang’ enables multi-lingual EPGs to be broadcast.• ‘recommendation’ allows the broadcaster to recommend specific programmes or
groups of programmes.• ‘trigger’ enables a suitably equipped receiver to accurately record programmes, using a
combination of data contained with the EPG and the PNum bytes broadcast withinDAB FIG 0/16.
5.5.4 Transportation and Compression of the EPG
Whilst uncompressed XML has many advantages, it is not ideal for broadcasting overDAB, when compared with other formats:
• It is verbose and as such is not necessarily suited to the restricted bandwidth channelsin which the DAB EPG will be broadcast (typically 16kbps or less).
• Parsing XML files provides additional complexity and temporary memory storageoverheads for receivers.
Consequently, a companion specification [TS 102371] has been defined, which describeshow the XML data is profiled, encoded and transported over DAB, such that:
• EPG data can be transported either in a standalone packet-data channel (N-PAD) orin a Programme Associated Data channel (X-PAD).
• The complexity of decoding the XML data is reduced.• The size of the transmitted data is reduced.• Both basic, and more advanced EPG receivers can be developed.
The encoding and transportation process contains three stages, as descibed in thespecification [TS 102371]:
• data profiling;• encoding;• transportation.
224 Digital Audio Broadcasting
![Page 253: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/253.jpg)
The XML data for each of the different data types (Service Information, ScheduleInformation and Group Information), is split into two profiles, the Basic Profile andthe Advanced Profile. The purpose of this profiling is to enable simpler and lower-costEPG-enabled receivers to be developed. These receivers have limited memory anddecoding capabilities. The Basic Profile consists of a subset of the most commonlyused EPG elements and attributes, the list of which is defined in the Binary Encodingspecification. The remaining elements and attributes are carried within Advanced Profilebinary data files. Some elements and attributes are contained in both files, to allow thetwo sets of data to be merged by advanced EPG receivers.
The Basic Profile and Advanced Profile EPG files are then binary-encoded usinga tag-length-value scheme. Each element and attribute is assigned a unique tagvalue. This tag is then followed by a ‘length’ parameter, which indicates the lengthof the data contained within that element or attribute, followed by the data itself(see Figure 5.10).
The following is an example of XML containing a single programme:
<epg xmlns:epg=‘http://www.worlddab.org/schemas/epg’
xmlns:xsi=‘http://www.w3.org/2001/XMLSchemainstance’
xsi:schemaLocation=‘http://www.worlddab.org/schemas/epg
epgSchedule_13.xsd’ system=‘DAB’><schedule>
<programme shortId=‘16442449’><epg:mediumName>PM</epg:mediumName><epg:location><epg:time time=‘2003-12-18T17:00:00’duration=‘PT1H0M0S’/><epg:bearer id=‘e1.ce15.c224.0’/></epg:location>
</programme></schedule>
</epg>
The pairs of hexadecimal digits below represent the data that would be containedwithin a Basic Profile binary encoded data file, generated from that XML:
02 27 21 25 1C 23 81 03 FA E4 51 11 04 01 02 50 4D 19 16 2C 0A 80 04 33
BF C4 40 81 02 0E 10 2D 08 80 06 40 E1 CE 15 C2 24
Table 5.12 explains how this binary encoding is achievedThe binary encoding scheme provides a balance between efficiency of compression and
complexitity of decoding. For the Basic Profile epg data files no further compression ofthe data is permitted. Due to the fact that receivers capable of decoding the Advanced
Figure 5.10 Tag-Length-Value scheme
Provision of Services 225
![Page 254: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/254.jpg)
Table 5.12 Binary Encoding example
Bytes Type Description
02 TAG: <epg> This is the tag for the top-level element.27 LENGTH: 39 This is the length in bytes of all data contained within this file,
excluding the two bytes for the <epg> tag and the lengthitself.
21 TAG: <schedule> This is the tag for <schedule>.25 LENGTH: 37 The length in bytes of all data contained within <schedule>1C TAG:
<programme>This is the tag for <programme>. This is the container for allinformation relating to a particular programme.
23 LENGTH: 35 The length in bytes of all data contained within<programme>81 TAG:
shortId attributeThis is the tag for the ShortId attribute
03 LENGTH: 3 This is the length of the value field for the ID attribute
FA E4 51 VALUE:16442449
The decimal value for the ShortId from the XML is convertedinto its hex equivalent
11 TAG:
<mediumName>This is the tag for <mediumName>.
04 LENGTH: 4 This is the length of the value field for <mediumName>,including the CDATA tag
01 TAG: CDATA This is the CDATA tag, and is used with text strings.02 LENGTH: 2 This is the length of the content for <mediumName>50 4D VALUE: PM The medium name of the programme.19 TAG: <location> This is the tag for <location>. The information relating to the
broadcast of this programme is contained within this element.16 LENGTH: 22 The length in bytes of all data contained within <location>2C TAG: <time> This is the tag for<time>. The information relating to the time
of broadcast of this programme is contained here.0A LENGTH: 10 The length in bytes of all data contained within <time>80 TAG: time
attribute
This is the tag value for the time attribute
04 LENGTH: 4 This is the length of the value field for the time attribute33 BF C4 40 VALUE: 2003-12-
18T17:00:00The binary encoding scheme support two ways of encoding thetime. The Short form encoding scheme uses less bytes, but does
not encode the seconds.81 TAG:
duration attributeThis is the tag value for the duration attribute
02 LENGTH: 2 This is the length field0E 10 VALUE: 3600 The length is encoded in seconds.2D TAG: <bearer> This is the value for the bearer attribute. The information
relating to the channel on which this programme is broadcast.08 LENGTH: 8 This is the length of the value80 ID attribute This is the tag for the service ID attribute.
06 LENGTH: 6 This is the length of the value field for the ID attribute40 E1 CE15 C2 24
VALUE:e1.ce15.c224.0
The ID is encoded using the contentId encoding scheme asdefined in the Binary Encoding specification
226 Digital Audio Broadcasting
![Page 255: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/255.jpg)
Profile data will have more capabilities than basic EPG receivers, additional GZIP[RFC, 1952] compression of the binary files is also permitted, to further reduce the sizeof these files on transmission.
The process of profiling and binary encoding the data generates a number of binary EPGfiles. These files are transported over DAB using the Multimedia Object Transfer (MOT)protocol (see section 4.3). Typically a DAB multiplexer will contain a single packet-modedata sub-channel containing all of the EPG data for the services carried on that multiplex.
5.5.5 EPG Data Management
Collection, warehousing, scheduling and validation of EPG data is important whether thedata is transported within an individual service provider’s X-PAD capacity or whether thedata for all of the services is aggregated into a single data channel. In the case where the datafromanumberof service providers is combined into a single channel, the efficient and reliablemanagement of this data becomes even more critical. Ensuring that the incoming data isproperly formed, combining thatdata intoa singleEPGservice, andencoding that data intoaDABEPG compliant format are all key functions of such an EPGmanagement system.
To manage incoming data feeds from multiple suppliers, a process, as outlined inFigure 5.11, has been adopted by a number of commercial multiplex operators. In thesituation where multiple service providers are generating and uploading their own
EPG Management DAB Multiplexer TransmiterNetwork
EPG Data for Service A
EPG Data for Service B
EPG Data for Service C
EPG Data for Service D
Figure 5.11 EPG data management process
Provision of Services 227
![Page 256: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/256.jpg)
content, a management server is placed in-between the content generation and thetransportation of that data. The service providers still retain the capability to producethe EPG data locally, but prior to broadcast the information is validated and cached. Themanagement of the broadcast bandwidth between multiple service providers enables thelimited capacity to be used as efficiently as possible. It also provides a single point forarchiving and logging the EPG data for security and licensing purposes.
5.5.6 Launch of EPG services
Through the work of WorldDMB, trials began in the UK in 2001. In London, contentfrom several broadcasters was aggregated and broadcast on a test ensemble withPC-based DAB receivers distributed to a closed user group.
With the standardisation of the XML format a number of trial EPG services werelaunched in the UK in October 2002 by the BBC, Chrysalis Radio and Capital Radio plc.The launch of these services was supported by EPG software for existing PC-based DABreceivers, the Modular Technology PCI card and the Psion Wavefinder.
From 2008, a number of other countries including Germany, Ireland and Australiahad trialled or launched EPG services.
5.6 Possible New Audio Services
The convergence of telecommunication networks and the integration of the next step ofradio technology will lead to new dual or triple mode devices (e.g. DAB &GSM, DAB&GPS, DAB & PDA, DAB & MP3-Player).
The success of future radio with possible new audio services lies in the combination oftraditional radiotogetherwithnewITtechnologies.Futureradiothereforewillbedigital,withstorage, internet access, display and several radio modes for DAB, DRM, DMB and FM.Following sections depict new opportunities of audio services using theDAB technology.
5.6.1 Dynamic Reconfiguration for Temporary Service Splitting
A main objective of the STI Standard [EN 300797] was to submit a dynamic reconfigura-tion of theDABmultiplex. This is necessary if services are added or removedwithin aDABensemble, or data rates of the services are changed (see section 6.2). The feature allows toextent the service structure at a particular time. An audio service can be split into two orthree sub-services. In the case of low audio bit rates the appliance of half-sampling-ratecoding (LSF) will improve the audio quality. Temporary reconfiguration may be reason-able for multilingual channels in multi-cultural programmes, for different regional pro-grammes or during parallel sport events (e.g. Football leagues, Olympic Games etc.).
5.6.2 Secondary Service Components for Main and Sub-Services
The DAB standard provides primary and secondary service components for the organisa-tion of services (see section 2.3.6). Primary components can contain a number of until 12secondary service components. One secondary service component can be linked to severalprimary components. It’s the listeners decision to switch to any sub-service. The service is
228 Digital Audio Broadcasting
![Page 257: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/257.jpg)
realised by the service provider in collaboration with the ensemble provider. The availabilityof a secondary service at the receiver is signalled acoustically or visually to the listener.
5.6.3 Announcement Channels for a ‘‘Near Radio on Demand’’
Radio listeners want to get information just-in-time he’s interested in. Announcementchannels are based on the idea to transport audio information (e.g. news, sport, weather,traffic update etc.) with narrow bit rates (e.g. 48 or 64 kbps) in parallel to audio channels.Beside the new source of information for the listener, the benefit for broadcasters is todischarge regular radio services from endless monotone announcements.
Possible audio sources are voice response systems, text-to-speech-systems andauto-record-/replay-systems. A voice response system assembles speech phrases,pre-stored in a database, to a whole message and replays this information over the broad-casting channel. An example is VERA (Verkehr in Real Audio) – a system for trafficinformation of the Westdeutscher Rundfunk WDR (German public broadcaster).Another alternative is to auto-record spoken messages from existing radio programmes(e.g. news channel) in a digital audio server and to auto-replay this in durable audio loops.Most flexibility offer text-to-speech-systems. New speech synthesis technologies improve theformer poor speech quality of text-to-speech-systems and allow natural language processing.
5.6.4 Announcement Switching for Personal Preferences
The announcement switching is known from the FM/RDS Traffic Announcement (TA)feature. The TA service supports traffic information updates while listening to otherradio programmes or local audio sources (e.g. CD, MP3). DAB at present offers 10announcement types more than FM/RDS (see Table 5.8). A benefit for broadcasters is toachieve listeners who are using local audio sources. Additional mechanisms like new andregion flags enhance the feature in case of update for same topics and regional interests.
5.6.5 Mailbox Radio
Mailbox Radio represents a project of IRT and Bayerischer Rundfunk to study the combi-nation of traditional Radio with new type of media consumption arising from Internet andMP3 technology. Basic requirement is a storage functionality embedded in the radioreceiver. Furthermore, the broadcaster sends inaudible tags using the standard Dynamiclabel plus (see 5.1.3.1) as description for every single programme item. Mailbox Radioreceives all radio signals in the traditional way as linear radio programmes. The innovationlays in the personal recorder functionwhich allows to record and to replay every programmeitem by using the content description from the Dynamic label plus feature. Now the listeneris able to choose previously broadcasted audio pieces, which are held in the local storage ofthe receiver (‘‘mailbox’’). The feeding of the ‘‘mailbox’’ is possible eitherwithDABaudio sub-channels or with MOT file casting in Packet Mode data channels.
Provision of Services 229
![Page 258: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/258.jpg)
6
Collection and DistributionNetworks
6.1 General
6.1.1 Basic Requirements
Operation of the broadband DAB system requires the continuous collection of servicecomponent data, the formation of the respective ensemble multiplex data and theirdistribution to the transmitter sites of the single frequency network. This leads to adistributed, synchronised real-time system encompassing both a collection and a distri-bution network. These networks are connected by the ensemble multiplexer device whichis situated in between.
Major differences between FM/RDS and DAB network architectures are outlined inFigure 6.1. In contrast to FM/RDS, DAB broadcasters, the service providers, sendservice component and additional data not directly to the transmitter sites, but on tothe ensemble provider who operates the ensemble multiplexer. Tasks to be fulfilled by aDAB ensemble multiplexer are numerous owing to expanded functionality in DAB asprovision for the dynamic change of the ensemble configuration, support of multicom-ponent services and enlarged on-air signalling compared to FM/RDS. With respect tosignalling it should be emphasised that all service providers and the ensemble providerhave to share the FIC, the common DAB signalling channel. Therefore provisions fordynamic signalling by service providers, but also avoidance of interference or inconsis-tency of signalling data are important issues.
In general, cooperation among the different contributors to the DAB transmissionsignal has to be managed. This will normally be done based on contracts between serviceproviders and the ensemble provider. Resources are allocated which comprise not onlytransmission capacities but also coding resources (unique identifiers) necessary for thesignalling of multiplex configuration, service and other information to DAB receivers.When sub-divided into management categories usually applied to telecommunication
Digital Audio Broadcasting: Principles and Applications of DAB, DAB+ and DMB, Third Edition Edited by W. Hoeg and T. Lauterbach© 2009 John Wiley & Sons, Ltd. ISBN: 978-0-470-51037-7
![Page 259: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/259.jpg)
networks, general management tasks to be realised in DAB networks are as shown inTable 6.1.
Obviously the extent of technical support of these tasks depends on the specificDAB network scenario and its operational requirements. In a more static andregulated environment there is of course lower pressure to provide for technicalsupport of management tasks than in the case when frequent changes are verycommon. Normally DAB service providers should be able to control a virtualensemble of their own and to signal accompanying static and dynamic serviceinformation comparable to FM/RDS.
Concerning DAB networks, timing aspects have to be taken into account care-fully. Not only do the single data streams of the service providers have to besynchronised, but also their actions have to be coordinated in a timely fashion toprevent any recognisable impairments at the DAB receivers. Different networkpropagation delays between the ensemble multiplexer and the transmitter sites in
FM/RDS
Studio 1(Service 1)
Modulator/Transmitter 1
(frequency f11)
Modulator/Transmitter x
(frequency f1x)
Studio n(Service n)
Modulator/Transmitter 1
(frequency fn1)
Modulator/Transmitter y
(frequency fny)
DAB Ensemble Multiplexer
Modulator/Transmitter 1(frequency f0)
Modulator/Transmitter 2(frequency f0)
Modulator/Transmitter n(frequency f0)
Studio1(Service
Multiplex 1)
(programme,data)
Studio i(Service
Multiplex i )
Studio n(Service
Multiplex n)
Figure 6.1 Network architecture of DAB versus FM/RDS
232 Digital Audio Broadcasting
![Page 260: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/260.jpg)
the distribution network have to be compensated in order to exclude destructive RFsignal superposition in the single frequency network. Therefore a common time andfrequency reference is needed. The satellite-based Global Positioning System (GPS)is largely used for that purpose.
DAB standards dedicated to the collection network, that is the Service TransportInterface (STI) [EN 300797] as well as the distribution network, the EnsembleTransport Interface (ETI) [EN 300799], have been defined. These standards takeinto account the implementation of DAB networks based on public telecommunica-tion networks. Specific error protection methods are defined to ensure safe andcost-efficient data transport from studios to transmitters. Although data transportissues are mainly dealt with, essential management tasks related to DAB operationare also specified by these standards. Consequently, the following sections areclosely related to these standards.
6.1.2 Ensemble Multiplexer
The ensemble multiplexer forms the key element in the DAB signal generation chain. Itsimplemented functionality determines to a large extent how the collection and thedistribution network can be operated, for instance which type of connections can beused and which DAB-related controlling and signalling possibilities are available forservice providers. To prevent complete ensemble drop-outs, the requirements for error-free operation of the ensemble multiplexer are especially high.
Figure 6.2 presents a conceptual block diagram of the ensemble multiplexer.Incoming data streams have to be synchronised first and then usually demultiplexedbecause the preferably used STI data frames are designed to include several servicecomponents. According to the actual configuration, the remultiplex of servicecomponents has to be accomplished thereby creating the MSC part of the ETIoutput frame. With regard to the 24 ms frame timing, these processes take place
Table 6.1 General management tasks in DAB networks
ManagementCategory
Task
Configuration (Re-)Configuration of ensemble multiplex
(Re-)Configuration of equipment (e.g. DAB mode, Til, physical interfaces,network and device delay)
Service Co-ordination of service provider actions
Monitoring and signalling of service informationFault Alarm and error signallingAccount Admission of service providers
Allocation of resourcesBilling
Security Support of closed user groupsBlocking of unauthorised control access
Collection and Distribution Networks 233
![Page 261: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/261.jpg)
synchronously, which means imposing a fixed frame relation between the outputand each of the contributing input data streams.
Concerning the signalling channel (FIC) which is part of the ETI output frame as well,two different sources of data have to be used in general.
One is the local FIG database. It comprises not only the MCI FIGs correspondingto the MSC configuration in use, but also FIGs defined by the ensemble provider(e.g. ensemble-related information like frequency or region definitions). Additionallyservice information FIGs delivered by service providers only once via control con-nection can be present there (FIG files). It is necessary to feed all these FIGsperiodically into the FIC. The respective repetition rates are individually differentand defined in [TR 101496].
The other source of FIGs to be transferred into the FIC are the STI input data streamswhich can carry so-called FIG streams too, that is FIGs provided and, if necessary,repeated by the service provider itself. These FIGs have to be transparently passedthrough the ensemble multiplexer.
The whole FIC contribution to the 24 ms ETI frame has to be assembled into FastInformation Blocks (FIBs) of 30 bytes length first. Concerning MCI, specific assemblingrules have to be met [TR 101496]. The FIC assembling process is asynchronous bynature; this means that in contrast to MSC contributions no fixed frame relation ordelay exists between FIGs delivered by service providers and their appearance in the ETIstream. Additionally consistency of FIG contents regarding resources allocated to ser-vice providers should be checked and ensured.
FIGDatabase
FIC Assembly(signalling)
Outputstream
generationMSCAssembly
(Multiplex ofservice
components)
Input streams
Remote control
Time and frequencyreference (e.g. GPS)
Local control(e.g. PC)
STI-D(ata)
STI-C(ontrol)
Synchronisationand
demultiplex ofinput
streams
Control(Configuration, communication, scheduling/timing)
Output stream
ETI
Figure 6.2 Conceptual block diagram of ensemble multiplexer
234 Digital Audio Broadcasting
![Page 262: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/262.jpg)
Because they are both reliable and cost efficient, the 2 Mbps [G.704] connectionsof public telecommunication networks are used in preference to the distributionnetwork. It is the task of the ETI frame generation block to form transport dataframes. Control information regarding final coding is included. ETI frames arenormally error protected and also time-stamped in order to cope with delay com-pensation among connections of different length and type from ensemble multiplexerto the transmitter sites.
Beyond the necessary device configuration and subtle scheduling, the control blockfunctions comprise a local control interface, for example a proprietary ApplicationProgramming Interface (API), as well as remote communication to service providersvia STI. Management functions, as mentioned in the preceding section, are therebysupported including the data transfer from and to both remote sites and locally usedtools supporting primary specifications of resources, configurations or FIGs and themonitoring of the ensemble operation as well.
To ensure synchronised data transfer and control actions a common time andfrequency reference is indispensable. GPS provides for both a reference clock andabsolute time at all locations and is therefore used in preference. Taking into accountthe signal delay up to the transmission antenna, the ensemble time can be derived fromthe GPS time string. This time is signalled via the FIC to receivers and is also neededfor coordination of activities in the collection network. Time-stamps are related to the1 pps GPS signal.
It is obvious that this potentially large functional complexity of the ensemble multi-plexer will lead to a wide variety of implementations. To ensure interoperability ofdevices from different manufacturers, compliance with the corresponding standardsand implementation guidelines is most important.
6.1.3 Conceptual Broadcast Network Outline
Figure 6.3 presents the DAB conceptual broadcast network outline as described earlier.At the service provider side, in general a primary multiplex of service components(encoded audio, packet or stream data, fast information data channel) and serviceinformation will be provided and delivered via STI. Service providers in the collectionnetwork can also be replaced by sub-networks comprising further STI serviceproviders.
Both the collection and the distribution network are dealt with in detail in sections 6.2and 6.3. Concerning the delay in the distribution network, refer also to section 7.4.A complete implementation example is described in section 6.4.
6.1.4 Implementation Issues
Many aspects have to be considered in the course of planning and implementing a DABbroadcast system. With regard to collection and distribution networks some importantaspects will be listed here briefly. The coverage area of a Single Frequency Network(SFN) is dealt with in Chapter 7. Figure 6.3 shows a DAB conceptual broadcast networkoutline.
Collection and Distribution Networks 235
![Page 263: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/263.jpg)
From an operational point of view the following requirements are essential:
• Reliability of operation, based on technical stable networks and correct manualspecifications created as much as possible ‘right by construction’.
• Ease of use, for example tool support related to different user classes, for instance(pre-) specification in contrast to simple scheduling of configurations.
• Automated operation, including scheduling of control actions, error and alarm reac-tions, remote operation.
• Provision of flexibility, for example ability of service providers to control their part ofensemble resources based on constraints individually allocated by the ensemble pro-vider who has to avoid erroneous interference due to the commonly used FIC.
• Integration into existing infrastructure, for example reuse of available RDS datasources and connection to automated play-to-air systems (see Chapter 5).
EnsembleController
EnsembleMultiplexer
Collection Network
STI
Distribution Network
ETI
Service Provider(s)
ServiceMultiplexer
ServiceController
Audio or DataService
Component
Audio or DataService
Component
COFDMModulator
Transmitter
Service Provider COFDMModulator
Transmitter
Ensemble Provider Transmission Network Provider
Figure 6.3 DAB conceptual broadcast network outline
236 Digital Audio Broadcasting
![Page 264: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/264.jpg)
• Cost efficiency, for example alternative use of telecom connections (for instance,use of bundled ISDN channels instead of 2 Mbps. G.704 PDH lines by serviceproviders).
Consequently, the following requirements for the respective equipment can be derived:
• Reliability, that is of course a highMTBF (maybe redundancy) but also supervision ofregular operation including error and alarm handling.
• Variety of (configurable) physical interfaces to support different types of connections.• Automated control, for example bymeans of scheduling functions integrated in service
and ensemble controllers.• Technical support of management tasks, for example resource allocation.• Open system architecture supporting interworking in existing infrastructure (e.g. API).• Standard compliance of equipment to ensure interoperability between devices of
different manufacturers.• Ability to integrate non-standard devices (e.g. available non-STI audio codecs).
Of course, not all of these requirements will be of the same importance in every case.According to evolving requirements, evolution strategies are preferred. This comprisesfeedback and evaluation of practical experiences.
6.2 The Collection Network
6.2.1 The Service Transport Interface (STI)
The STI was originally defined within the Eureka 147 project and published by ETSI as[EN 300797]. The standard is rather complex because it covers both a large variety of datatransmission issues and also DAB specific management tasks related to the collectionnetwork.
The basic building blocks of an STI-based collection network are point-to-pointconnections established between devices supporting STI at their respective connectors.From a logical point of view the STI connection is sub-divided into a unidirectional dataconnection, mainly conveying the data streams to be broadcast, and a bidirectionalcontrol connection. Of course, this does not imply strict separation with respect tophysical connections.
Regarding the single logical STI connection as shown in Figure 6.4, STI devices can bedepicted in general as abstract entities which are distinguished according to the directionof the main data flow. The upstream entity delivers the data and therefore represents aservice provider in every case. The entity at the receiving side of the data connection iscalled the downstream entity and can represent the ensemble provider or alternatively anintermediate service provider in the collection network.
The conceptual model of the STI is outlined in Figure 6.5. Beyond the separation ofdata and control, layers are introduced to reduce complexity and to provide for furtherinternal interfaces.
At the top layer the basic data frame structure and control messages are defined.Consequently it consists of two logical interface parts: the data part STI-D(LI) and the
Collection and Distribution Networks 237
![Page 265: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/265.jpg)
control part STI-C(LI). Unlike broadcast data transport, error-free transport of controldata is indispensable but not time critical.
Therefore an additional transport adaptation layer STI-C(TA) ensuring safe transportof control data was defined. This includes the ability to address the respective entities,too. Based on the definition of a common generic transport frame, the physical interfacelayer STI(PI,X) standardises how STI should apply widely used physical interfaces.Thereby aspects of framing, forward error correction, delay compensation as well aselectrical parameters and connectors had to be considered.
The different parts of the STI definition will be dealt with in the following sections.
6.2.1.1 The Logical Data Interface
The frame structure of the logical data interface STI-D(LI) is represented in Figure 6.6.To provide for flexible use, the STI-D(LI) frame is related to the common interleavedframe (CIF) as defined in [EN 300401].
STI-D (LI)
Data
STI-C (LI)
Control
UpstreamEntity(UE)
DownstreamEntity(DE)
Figure 6.4 Logical STI connection
– logical frame– broadcast data
STI-D (LI)
– message syntax– control information
STI-C (LI)
– transport protocol– error management– addressability
STI-C (TA)
– framing– forward error correction– electrical interface and connector
STI (Pl, X)
Logicalinterface (LI)
Transportadaptedinterface (TA)
Physicalinterfaces (PI)
Figure 6.5 Layer structure of STI
238 Digital Audio Broadcasting
![Page 266: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/266.jpg)
Apart from the source identification, the unique service provider identifier, each singleframe can be identified additionally within time slots of 2 minutes by its modulo 5000frame counter value. In general, the STI-D(LI) frame will comprise several streams eachindividually described in the stream characterisation field. Possible stream types arelisted in Table 6.2.
Independent of the contents, two basic classes of streams have to be distinguished:continuous and discontinuous. Continuous streams have a fixed amount of data per STI-D(LI) frame. According to initial synchronisation they have to experience a constantdelay being passed through the DE. Thereby synchronous transmission is ensured. All ofthe MSC-related stream types with the exception of the MSC packet mode contributionare of that type. The latter requires pre-processing, that is an additional pre-multiplexstep to merge several streams of this type and to form a complete MSC packet modestreamwith a sub-channel bit rate of n � 38 or n � 332 kbps as required by [EN 300401].
Unlike continuous streams, discontinuous streams will not convey the same amount ofdata, or data at all, in each of the consecutively provided STI-D(LI) frames and, ingeneral, data will not be delayed, but is constantly passing through the DE.
Table 6.2 STI-D(LI) stream types
Stream Type/Extension Comment
MSC audio stream* 0/0 Independent of sample frequencyMSC data stream* 0/1
MSC packet mode stream* 0/2MSC packet mode contribution 3/0 Needs to be adapted to sub-channelFIC service information* 4/0 No MCI FIGs allowed
FIC data channel* 4/1 TMC, paging, EWSFIC conditional access information 4/2 EMM and EMC FIGs
(only an alternative to usage of MSC)
FIB (asynchronous insertion) 5/0 32 bytes per frame (FIGs and CRC)FIB (synchronous insertion) 5/1 FIBGRID message defines insertionIn-house data 7/X User definable (no broadcast)
*Basic stream types as defined in [TR 101860], see section 6.2.4.
STCEOHFC EOFMSTEOH TIST
Streamcharacterisation
End ofheader
– CRC
Main stream data
per stream:– Stream data– Stream CRC (if signalled in STC)
End offrame
– Time stamp(optional)
Framecharacterisation
– SP identifier– Frame counter– Number of streams
Time-stamp
per stream:– Stream length– Stream type– Stream Id– Stream CRC flag
Figure 6.6 Frame structure of the STI-D(LI)
Collection and Distribution Networks 239
![Page 267: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/267.jpg)
The actual number of bytes per stream and frame is called stream length and isdynamically signalled in the stream characterisation field. Stream length equals zero ifa stream is logically opened but has no data in the respective frame.
Astreamidentifier (streamId) isused torefer tostreamsbySTI-C(LI) configurationdata.It should be noted that the stream data extraction process from STI frames received isperformed under control of the current configuration at the ensemble multiplexer (or DEin general). Further stream type/extension coding values are reserved for future definition.
6.2.1.2 The Logical Control Interface
The logical control interface is based on ASCII-coded messages which can be transferredasynchronously. A bidirectional connection is assumed to support typical requestresponse communication between the two entities.
The unified message format of STI-C(LI) consists of a seven-character command wordfollowed by a three-character extension and an individual set of parameters. All fields areseparated by blanks and the message is terminated by a semicolon. The whole set ofmessages and its usage are described in detail in [EN 300797]. The standard also defineswhich kind of entity (upstream or downstream) is entitled to use a certain message andhow to respond on its reception. For the sub-set definition of the message set with regardto STI implementation levels refer to section 6.2.4.
So-called data exchange sessions are used at logical interface level to provide forcomplete block transfer of logically related messages, for example anMCI configurationor a FIGFILE. In Table 6.3 a survey is given of the spectrum of STI-C(LI) messages.Each message class comprises a number of messages, specified for the different purposes.
6.2.1.3 The Transport-adapted Control Interface
The transport adaptation is aimed at ensuring an error-free transmission of STI-C(LI)messages including the addressing capability. Unlike for audio channels repeated trans-mission is not a principal problem. Therefore STI-C(TA) consists of a TCP/IP-liketransport protocol which can be replaced by real TCP/IP under certain conditions (seesection 6.2.5). Differences from TCP/IP concern the reduced length of packet numbersand addresses.
Table 6.3 Message classes of STI-C(LI)
Message Class Messages Function Message Example
ACTION 6 Control of reconfiguration RCONFIG REQ name time
framecount;CONFIG 10 Ensemble configuration CONFDEF DEF name <spec>;FIGFILE 8 Static FIG data FIGFILE REC <FIG data>;FIBGRID 6 FIB insertion (into FIC) FIBGRID REC <data>;RESOURCE 27 Resource allocation CHANCAPDEFMSC capacity;INFORMATION 16 Information about status COUNTER INF;SUPERVISION 9 Error and alarm information ALARMST DEF status time;
240 Digital Audio Broadcasting
![Page 268: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/268.jpg)
Figure 6.7 illustrates how STI-C(TA) data are formed. This process is again based on alayered approach. The whole functionality could be assigned to the transport layer of theOSI reference model because the STI-C is an end-to-end connection between two STIentities. Nevertheless functionality analogous to lower OSI layers is used to describe thedifferent functional parts.
At the receiving side the CRC of the data packet will be checked first. In case there is noerror then the useful data will be submitted to the layer above. Otherwise the data will beignored and re-sent by the source entity later on owing to missing acknowledgement.At the next layer the destination address of the packet is compared with the address of thereceiver. If there is no match, the data packet will again be ignored. In the opposite case,the data were intended for the receiving entity and were transmitted error-free.
Consequently the next layer will acknowledge its reception using the respective packetnumber under the condition that no packets have been lost in between. The acknowl-edgement requires sending a message back to source and can be combined with thetransmission of useful information. Finally the STI-C(LI) DATA, a substring of pre-defined length of the overall message sequence at source side, is passed to the logical layer.
It should be emphasised that the received data packet in general will not be aligned toone or more complete STI-C(LI) messages. Message detection and interpretation takesplace in the resulting character string formed by appending the data packets consecu-tively as received. Overhead per transport packet is 32 bytes. The transmitting sidebehaves in the opposite way.
The protocol requires an explicit open/close of connections. Owing to the multiplex oflogical connections corresponding to SAD/DAD addresses, a common STI-C channelcan be used to communicate with several destinations.
This will be particularly useful in the case of a common reverse channel from theensemble multiplexer or in the case of multicasting the same forward channel from theservice provider (e.g. together with STI-D via satellite).
6.2.1.4 The Physical STI Interface
Physically transported frames are all derived from a generic transport frame as shown inFigure 6.8.
STI-C(LI) DATA Logical TransportNetworkData Link
HEADER
SAD
START CRC
Padding
Fixed length transport packet to be transmitted (32 ≤ × ≤ 256 bytes)
HEADER Transport header incl. packet / acknowledge numbersSAD/DAD Start / Destination addressSTART/END Delimiter characters
DAD
END
Figure 6.7 Layer structure and format of STI-C(TA) packets
Collection and Distribution Networks 241
![Page 269: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/269.jpg)
Compared to STI-D(LI) it contains the additional synchronisation field including anerror status field, marking the severity of errors detected and set by the error-detectingunit. Further on, a transport frame header is inserted which signals the fixed size of thefollowing data and control part. Either STI-D(LI) or STI-C(TA) or both can be trans-ported depending on the respective field size described in the transport header.
The generic transport frame has to be adapted to the specific physical interface in use.Frame assembly details as well as connectors are described in [EN 300797]. In total thestandard defines eight physical interfaces. For synchronous transmission the widelyused 2Mbps interfaces G.704 (with and without FEC as in ETI) andG.703 are available.
Further interfaces concern bundled ISDN channels including delay compensationaccording to H.221 (J.52), V.11 (RS422), IEC 958 and WG1/2 from Eureka 147. V.24(RS232) can be used for asynchronous, low-bit-rate transmission. Although it is appro-priate in most cases to transport STI-D and STI-C within the same connection, thestandard provides possibilities of transmission using separate connections. Figure 6.9demonstrates both cases.
6.2.2 Network Architecture
According to [EN 300797] the collection network is logically based on point-to-pointconnections forming a tree-like hierarchy of entities. Figure 6.10 outlines this bymeans ofan example. It should be recalled that diverse physical connections between entities canbe implemented.
Each entity can be classified by a type according to its role in the network [TS 101860].As already introduced in section 6.1, the essential roles are service or ensemble provider.
Based on implications to specific STI functionality to be implemented, service provi-ders are further distinguished into those who are in the UE position and those who aresituated intermediately in the tree, that is, those who are both UE and DE (see alsosection 6.2.4).
As outlined in Figure 6.10 each entity needs to be identified uniquely by a service orensemble provider identifier. These identifiers are used for the addressing of controlmessages and marking of logical data frame sources as well. No specific numberingscheme is pre-defined. The total of transmission and coding resources allocated to anentity have to be shared between this entity and all of the entities connected to its inputs.
Synchronisation
– Error status– Frame synchro- nisation
Data frame
– STI-D(LI) data (see Fig. 6.6)
Control frame
– STI-C(TA) data (see Fig. 6.7, a constant number of transport packets)
Transport frameheader
Data framepadding
Framepadding
TFH DFSYNC CFDFPD FRPD
– Data frame size– Control frame size
Figure 6.8 Frame structure of the generic transport frame STI(PI,X)
242 Digital Audio Broadcasting
![Page 270: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/270.jpg)
For instance, in Figure 6.10, resources allocated to SP 100 comprise resources reservedfor local use by SP 100 itself (e.g. due to service components or information inserted bynon-STI sources at this level) and those propagated to its subordinated SPs, that is to SP1001 and 1002.
SPUE(1001)
SPDE/UE(100)
SPUE(1002)
SPDE/UE(200)
SPUE(2001)
SPUE(300)
Leaf entities
Intermediateentities
Root entity
STI
STI
down-stream EP
(10)
up-stream
Figure 6.10 Tree-structured DAB collection network (example)
V.11
DE
V.24
STI-D
STI-C
DE
STI-D
STI-C
UE
STI-D
STI-C
UE
STI-D
STI-C
G. 704/2
Figure 6.9 Physical connections of STI-D and STI-C (examples) upstream
Collection and Distribution Networks 243
![Page 271: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/271.jpg)
At least during the migration phase real networks may additionally comprise non-STISPs (see also section 6.2.4). Section 6.4 presents a corresponding example.
6.2.3 Network Operation
The requirement of both flexible and safe regular operation of the complete DABbroadcast network constitutes a challenge due to the complexity of the distributedreal-time system. In general, service providers should be able to operate indepen-dently of each other, but be coordinated by the ensemble provider, based onrespective contracts.
Assuming collection network has been established according to section 6.2.2, STI-C(LI)-basedmanagement tasks and subsequent actions have to be considered concerningdynamical operation. STI-D stream processing is consequently controlled. For simpli-city, the focus will be on the most important first hierarchical level of the collectionnetwork, that is EP and directly connected SPs. The STI defines an interface of machine-readable data and no user interface for operators. In practice there will be a need foradditional tools performing the translation tasks from manual specifications to STIcontrol messages or FIGs and vice versa.
In order to enable service providers to start broadcasting, the ensemble providerhas to provide some prerequisites. The control connections to the service providershave to be opened using the provider identifiers as negotiated. Via these connec-tions information about individually allocated resources could be transmitted to theservice providers if implemented. Otherwise this information has to be passed tothem outside of STI. Essential data, which can be delivered via STI-C byRESOURCE messages, comprise:
• identifiers of sub-channels, services, FIC data channels and linkage sets;• transmission capacities of MSC and FIC;• maximum number and bit rates of specific stream types;• restrictions concerning usable FIGs (regarding FIG type/extension);• entitlement and parameters to send announcements.
Based on these, service providers are able to specify and check activities of their own.Further on, an empty ensemble can be generated, which means no service components
are included before the first reconfiguration initiated by a service provider. Neverthelessbasic ensemble-related FIGs can already be sent as defined by the ensemble provider.Essentially this FIG set will consist of
• ensemble identification and label (FIG 0/0, FIG 1/0);• date and time (FIG 0/10);• ensemble-related tables to be used, country with local time offset (time zone)
(FIG 0/9);• frequency lists (FIG 0/21);• TII lists (FIG 0/22);• regional definitions (FIG 0/11).
244 Digital Audio Broadcasting
![Page 272: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/272.jpg)
Service providers will normally start transmission by performing a reconfiguration of thevirtual ensemble allocated to them, for instance by means of RESOURCE messages asmentioned above. Figure 6.11 shows this process in chronological sequence.
First of all the multiplex configuration has to be defined in the frame of a data exchangesession. Therefore the first message block will be enclosed by CONFDEF DEF andCONFDEF END messages. The CONFDEF DEF message is the header of the blockproviding the name of the configuration and numbers ofmessages of specific type included.
The body of the message block contains the following definitions (one message peritem):
• Sub-channels to be used for transmission of service components including identifiersand protection levels (SUBCHAN DEF).
• Service components (CMPNENT DEF) including service component types and cor-responding stream and sub-channel identifiers (for bothMSC and FIDC), also includ-ing packet addresses in the case of packet mode service components.
CONFDEF DEF cfg1 ... ;SUBCHAN DEF ... ;CMPNENT DEF ... ;SERVICE DEF ... ;
CONFDEF END;
RCONFIG REQ cfg1 <t5>;
.
.
.
RCONFIG DEF cfg1 <t5>;
t
t5-x
t0ServiceProvider
EnsembleProvider
t1
t3
t
t4
Definition ofConfiguration
Request forReconfiguration
Confirmation ofReconfiguration
Storage ofConfiguration
Execution ofReconfiguration Execution of
Reconfiguration
t2
t5
Figure 6.11 Control message flow for definition and activation of virtual ensemble configuration
(example)
Collection and Distribution Networks 245
![Page 273: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/273.jpg)
• Service definitions (SERVICE DEF) comprising one or more service components andbased on the specifications given before.
• Further optional definitions, for instance to specify by name that predefined FIG files(signalling data) have to be enabled at reconfiguration instants (USEFIGF DEF) orthat FIG streams out of STI-D have to be inserted into FIC (USESTRM DEF).
Firstly, the ensemble provider needs these data for generation of MCI FIGs to signal themultiplex on-air. Secondly, these data are necessary for controlling stream extractionfrom STI-D to form the MSC and to enrich the FIC in case FIG streams are in use.
The messages received will be checked for plausibility and compliance to theallocated resources. If the checks are passed, the configuration is stored and can bereferred to from then on. Otherwise an error message is sent back to the serviceprovider. How many configurations an ensemble provider is able to store dependson implementation and usage. Service providers can be informed about that viaSTI-C. Next the service provider will request a reconfiguration from the ensembleprovider specifying the name of the configuration and the execution time wanted(RCONFIG REQ). To ensure seamless reconfiguration the time specification (<t5>in Figure 6.11) must be frame related. It is therefore sub-divided into a UTC valueuniquely addressing 2 minutes out of 24 hours and a data frame count valuespecifying the respective 24 ms frame within the 2 minutes.
According to [EN 300401] two subsequent reconfigurations must have a time distanceof at least 6 seconds. Because there is no coordination required between service providersto agree on reconfiguration times, only the ensemble provider is entitled to define theinstant of execution. Thereby the latter is able to merge the requirements of severalproviders in such away that only execution times equal to or later than the requested onesare allocated.
Correspondingly the ensemble provider will check that a correct configuration of thereceived name has been defined previously by the service provider and will define theexecution time for reconfiguration as close as possible to that requested. This informa-tion is sent back to the service provider (RCONFIG DEF). From now on a reconfigura-tion is pending at the ensemble multiplexer which will lead to the corresponding on-airsignalling of the next ensemble configuration starting automatically about 6 s beforereconfiguration. Per provider, only one reconfiguration can be pending at a time.
Assuming that the service provider does not cancel the reconfiguration request right intime (RCONFIG CAN), it is expected that contributions are delivered via STI-D pre-cisely timed and in accordance with the activated configuration. Otherwise error mes-sages would be generated by the ensemble provider. Some further remarks are neededregarding the right instance to change streams or bit rates. As depicted in Figure 6.11 theservice provider needs to know the propagation delay x of the STI-D frames, that is thetime offset between departure of a frame at the service multiplexer and the appearance ofits contents in the respective ETI frame leaving the ensemble multiplexer. Bymeans of themessage COUNTER INF a service provider can ask the ensemble provider about theframe-counter-related time difference and has to take this into account to supportseamless reconfiguration. Moreover, decreasing the bit rate of a sub-channel needs tobe accomplished 15 frames in advance to comply with the 16 frame interleaving processof the on-air signal.
246 Digital Audio Broadcasting
![Page 274: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/274.jpg)
Provision of service and ensemble information is essential. As mentioned earlier, thereare two basic mechanisms to be used in conjunction or alternatively: FIG streams(transported in STI-D) and FIG files (transported in STI-C). The main differenceconcerns the responsibility for FIG repetition. Required repetition rates are defined in[TR 101496]. In the case of FIG streams, which are transparently passed into the on-airFIC, this must be performed by the source, for example by a service provider. Otherwisethe ensemble provider is responsible for repetition of FIGs.
It should be emphasised that special treatment of so-called list FIGs is necessary. In themain, information is concerned with
• service linking sets;• region definitions;• frequency lists;• transmitter identification lists;• announcement support;• other ensemble services;• satellite database.
These FIGs comprise small databases. Well-defined parts of them should beupdated selectively in order to avoid time-consuming recovery of complete databy receivers in case of changes. That is, with regard to key data fields the changeevent concerning a data subset has to be signalled by means of specially definedFIGs sent for 6 seconds between the old and the new data versions (SIV/CEI, seealso [TR 101496]).
Additionally or alternatively FIG files can be used to signal supporting information.As with ensemble configurations, the corresponding file, which consists of one or moreFIGs, has to be transferred to the ensemble multiplexer first. It would be checked andstored analogously under its name.
Further on, two alternative activation mechanisms are standardised for FIG files.As mentioned above, the FIG file to be activated at the instant of reconfigurationshould be named by means of a USEFIGF DEF control message which is part ofthe respective ensemble configuration. Alternatively, FIG files can be activated ordeactivated explicitly using FIGFILE SEL(elect) or DES(elect) messages respec-tively at arbitrary time points. Thereby activation/deactivation can be triggered inprinciple either based on pre-defined schedules or derived from events like key-stroking by a moderator. Repetition of FIGs as part of FIG files including the SIV/CEI treatment is up to the ensemble provider.
Intermediate service providers exist in hierarchical collection networks (Figure 6.10)consisting of more than one level of service provider. As a downstream entity they shouldcommunicate with its upstream service providers like an ensemble provider. In theopposite direction, as an upstream entity, they should behave like other service providers(leaf entities). Consequently, intermediate service providers have to share resources withand act on behalf of their subordinated service providers.
Because STI only covers management issues very close to DAB, there is a need forsupport beyond STI to operate real networks. For example, section 6.4 will briefly coversuch requirements and their practical implementation.
Collection and Distribution Networks 247
![Page 275: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/275.jpg)
Important requirements are:
• automation of operation (scheduling);• coding support for ensemble configurations and FIGs guided by allocated resources;• event logging;• alarm handling;• connection to existing infrastructure (e.g. studio operation system, databases/
sources).
The problem of interoperability due to devices from different manufacturers who mayeach implement different subsets of the STI is considered in section 6.2.4.
6.2.4 STI Implementation Levels
As demonstrated above, the STI standard [EN 300797] is rather complex and thereforethe question arises how the interoperability of equipment produced by different manu-facturers can be ensured. It is quite reasonable that not all STI-compliant devices have toprovide for the complete functionality as defined in the standard. Owing to the differentextents of dynamic operation of the specific collection network and the number and kindof providers involved, there will of course be varying requirements leading to differentimplementation costs too.
Faced with this situation, a WorldDAB task force derived subsets of functionalityfrom the standard. It was assumed that the standard itself should not be changed. Atechnical specification defining ‘STI Levels’ has been standardised by ETSI [TS 101860].
Analysis has shown that definitions of basic stream types to be processed as well asmanagement functionality related to the STI control functions are most importantconsidering useful sub-sets of functionality. Therefore sub-division of functionality hasbeen done with regard to these criteria. Three hierarchical levels of STI functionality havebeen defined. This means that a higher STI level fully encloses the lower ones. But eventhe highest level, the third level, does not comprise the whole functionality of[EN 300797]. Some special functions are declared to be optional and level independent.
Also physical interfaces are beyond the scope of the STI level definition because it ismuch easier to reach interoperability between devices on this level than on a functionallevel. A wide variety of terminal adapters and other interface converters can be used forthat purpose. Table 6.4 outlines the STI levels as defined in [TS 101860].
Implementation of the control channel is not required at STI Level 1. Only STI-D hasto be supported regarding basic stream types. In contrast to the ensemble provider, or adownstream entity in general, service providers are only enforced to generate at least oneout of the basic stream types. Implementations at the downstream side will be similar tothose aimed at supporting nonSTI providers (refer to section 6.2.5).
To be compliant with STI Level 2 the availability of the control channel is assumed andprocessing of a basic set of STI-C(LI) messages has to be implemented. This leads to theability for seamless dynamic reconfiguration initiated by the remotely situated serviceprovider. FIG files can be used for FIC signalling. Both FIG file activation mechanismsas described in section 6.2.3 have to be implemented.
248 Digital Audio Broadcasting
![Page 276: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/276.jpg)
The advanced STI Level 3 additionally provides for ensemble coordination bymeans of RESOURCE messages. Nearly the full functionality of STI-C(LI) has tobe realised to be compliant. Upstream entities working at the same level get usefulinformation via STI-C to guide their specification process and to make it right firsttime. At downstream entities consistency checks will be carried out on all directlyconnected upstream entities based on the respective resources allocated. This con-cerns supervision of used stream rates and transmission capacities as well as thechecking of FIG contents. Severe interference between service providers can therebybe excluded.
For example, this relates to service and service component identifiers used in a coupleof FIGs to signal service labels, programme type, announcement support and so on. Alsolinkage and announcement provision data (e.g. cluster Id, announcement type and, ifapplicable, sub-channel Id) should be checked. In case of errors or inconsistencies, thegeneration of STI-C(LI) error messages takes place, for instance STERROR DEFmessages pointing out respective stream Id and error type.
Optional functions which are beyond the scope of the STI level definition mainlyconcern:
• Ensemble output of time, respectively frame, window related FIGs as needed forlow-power-consuming receivers dealing with paging or emergency warning sys-tems or for entitlement messages to be signalled in FIC to support conditionalaccess.
• MSC sub-channel contributions, as PMC, which need to be pre-processed beforemapping into ETI frames.
Table 6.4 STI implementation levels
Level Interface STI-D(LI) StreamTypes
STI-C(LI) Messages Comment
1 Restricted (no control
channel)
Local control proxy for UE
at DE needed2 Regular Processing of basic
stream types:
MSC audioMSC stream dataMSC packet data
FIG (SI)FIG (FIDC)
ACTION,CONFIG, FIGFILE,
INFORMATION,SUPERVISION
Seamless dynamicre-configuration initiated by
remote SP (UE), FIGfile-based signalling, statusand error messages
3 Advanced RESOURCE Resource allocation andconsistency checks, more
status and error messagesOptions Processing of other
stream types:
FIB, PMC,FIG(CA)
FIBGRIDReconfiguration
enforcement of UEby DE
Selection of physicalinterfaces according to STI
standard by both users andimplementers
Collection and Distribution Networks 249
![Page 277: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/277.jpg)
• Use of FIB instead of FIG streams leading to specific FIC assembling requirements.• Enforcement of upstream entity reconfigurations by the downstream entity.
These functions, if needed, have to be negotiated between users and implementersindividually because they cannot be assumed as supported by STI devices in general.
STI levels should be assigned to single interfaces (input and/or output) of STI devices.Connecting interfaces of different levels by an STI connection is possible. In order not tolose functionality, at the paths from the leaf entities to the root entity the following ruleshould apply to each point-to-point STI connection: the STI level of the upstream entityshould be lower than or equal to the STI level of the downstream entity. In case this doesnot hold and the upstream entity uses an STI-C(LI) message not implemented at thedownstream side, the downstream entity should answer with a message informing aboutthe reception of an unknown message.
6.2.5 Integration of Non-STI Service Providers
DAB collection networks according to Figure 6.10 are exclusively based on STI andtherefore do not take into account service providers not compliant with STI. Integrationof these so-called non-STI service providers supports migration to DAB and is motivatedby the following requirements.
At least in the introductory phase of DAB there are broadcasters who intend to startDAB transmission without substitution of available but not STI-compliant equipment.They will accept some operational restrictions instead. Secondly, in special cases ofcooperation among ensemble providers the ability to extract service components fromone ensemble output data stream (ETI, see section 6.3) and insert them into anotherensemble could be useful.
A principal solution can be based on splitting up both the control and data partsincluded in the STI. The non-STI service provider owns no STI control channel anddelivers only the service component data, in the simplest case only one DAB-formattedaudio stream according to [EN 300401], using arbitrary physical interfaces supported atthe input of the receiving downstream entity. No FIG streams can be delivered.Necessary configuration and service signalling data have to be provided by the down-stream entity using its local control interface. In other words, the downstream entitycompletely takes over ensemble control including the signalling of service information asproxy for a non-STI service provider. This is close to support of service providers at STILevel 1.
Surely some restrictions will be imposed regarding regular operation where serviceand ensemble provider typically belong to different organisations and where anensemble provider will not normally be able to perform frequent and timely coordi-nated changes in service signalling or dynamic reconfigurations on behalf of a remo-tely situated nonSTI service provider. Therefore, application of this approach will berestricted to special cases of static kinds of operation without dynamically signallingservice information.
The network example given in section 6.4 shows that the approach described above hasbeen implemented successfully.
250 Digital Audio Broadcasting
![Page 278: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/278.jpg)
6.2.6 Advanced Features and Further Development
In the early stage of DAB introduction, not all features defined in the respectivestandards are of the same importance and will be implemented immediately. The mostimportant features related to collection networks have been described earlier, also takinginto account different STI implementation levels.
Based on the changes in the broadcast landscape in general, and experiencesgathered on collection networks, implementations are developed with respect tothree categories:
• use of advanced features already standardized;• evolution of standards, especially the STI standard;• evolution outside DAB standardisation.
The first category mainly comprises features such as:
• extended use of satellites in the collection networks (multicast of STI data);• dynamic change of local services and respective signalling of local service areas;• dynamic post-processing of received signalling data by the ensemble provider, for
example to form ensemble preview on programme types;• use of the FIC overflow channel (Auxiliary Information Channel, AIC);• provision for time window related FIC output (by paging, conditional access, EWS).
Evolution of the STI standard could mean for instance:
• acknowledgement of every transaction executed to support closer supervision;• additional information messages, for example to ask for FIG files which are currently
active;• provision of ensemble-related global signalling data as, for instance, table, country and
regional definitions to upstream entities thereby supporting specification of relatedFIGs;
• support for cross-signalling between cooperating ensemble providers or even cascad-ing of ensembles;
• standardisation of conformance tests for STI devices.
All in all, open and reliable system solutions providing easy and seamless adaptation tothe embodying infrastructure, as well as offering trade-offs between functionality andexpenditure will be developed stepwise.
6.3 The Distribution Network
6.3.1 The Ensemble Transport Interface (ETI)
Originally defined within the Eureka 147 project, the ETI was published by ETSI [EN300799]. It is intended to be used for the distribution of ensemble data from the ensemblemultiplexer to the transmitting sites of the single frequency network (SFN).
Collection and Distribution Networks 251
![Page 279: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/279.jpg)
The ETI is conceptually based on layers differentiating between the logical interface(LI) and, at the physical layer, network-independent interfaces (NI) and network-adapted interfaces (NA). For physical transport in public telecommunication networks,it has been decided not to exceed the bit rate of 2 Mbps with regard to cost efficiency.Consequently, the process of convolutional encoding, which leads to higher ensembledata rates of 2448 kbps (DAB transmissionmode III) or 2432 kbps (DABmode I, II, IV),must be shifted from the ensemble multiplexer to transmission sites. The data to bebroadcast is transmitted un-coded via ETI and normally another means of error protec-tion is needed. Forward Error Correction (FEC) based on Reed Solomon (RS) blockcoding has therefore been defined in ETI(NA). In the following, the different ETI layerswill be described in more detail.
The frame structure of the logical data interface ETI(LI) is presented in Figure 6.12and corresponds to those of STI-D(LI) as presented in Figure 6.6. As STI-D(LI), theETI(LI) frame carries data that are related to the 24 ms Common Interleaved Frame(CIF) formed in the channel encoder at the transmission site.
The frame characterisation field comprises the lower part of the complete frame count(modulo 250, i.e. at 6 s periodicity) and a flag to point out that FIC data are present at thebeginning of the main stream data part. The amount of FIC data, if present, is deter-mined by the DAB mode signalled as well (three or four FIBs with 32 bytes eachdepending on the transmission mode). Further on, the number of streams contained,and the overall frame length, is described in the frame characterisation field. The framephase (FP) consists of a modulo 8 counter, incremented at each frame, and controls theTII insertion in the channel encoder. On starting the ensemble multiplexer it must beensured that FP zero is aligned to CIF count zero.
Each stream to be broadcast in the MSC is specified by its single stream characterisa-tion (SSTC) which thereby commands the channel encoder, see section 6.3.3. As depictedin Figure 6.12, the start address in MSC (in CU, 0 . . . 863), the sub-channel identifier aswell as service component type and protection level to be applied by the channel encoderare given in addition to the length of the respective stream data in the MST field. Ofcourse, data included in the SSTC have to be compliant with those signalled via FIC (i.e.the MCI).
In contrast to STI-D(LI), only streams constituting complete MSC sub-channels canbe transported using ETI(LI).
The subsequent end of header (EOH) field comprises not only a CRC for errordetection but also 2 bytes of the multiplex network signalling channel (MNSC) to beused for management purposes (see section 6.3.3).
Frame data are completed by a further check sum of the MST contents and theETI(LI) time-stamp. This time-stamp is for managing delay compensation in the trans-port network and defines the notional delivery time of the frame at the input of thechannel encoder. Time is represented as (always positive) offset to a common timereference, mostly the one pulse per second (1 pps) of GPS. Time resolution is 61 ns.But, in most cases, accuracy will be determined by the accuracy of the time reference. Anadditional time-stamp is defined at the NA layer (see below).
At the physical layer, ETI(NI) is defined without error protection and therefore is onlyapplicable for restricted use, such as for local connections or test purposes. To form anETI(NI) frame, frame sync pattern and error status (analogous to STI generic transport
252 Digital Audio Broadcasting
![Page 280: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/280.jpg)
frame, see Figure 6.8) as well as frame padding bytes (according to the bit rate used) areadded to the ETI(LI). The interfaces ETI(NI,V.11) and ETI(NI,G.703) are defined in[EN 300799] to support RS432 and PDH-based connections respectively.
For operational distribution networks, ETI(NA) is normally used owing to the provi-sion of FEC. The interfaces defined in [EN 300799] primarily concern two versions ofinterfaces compliant to G.704, but adaptation to PDH based on the first hierarchicallevel of 1544 kbps instead of 2048 kbps is given as well.
With respect to G.704, the mapping of 24 ms ETI(LI) frames into the correspondingmultiframes of PDH is defined. There is a trade-off between redundancy used for FECand the maximum useful bit rate available.
The first version, ETI(NA,G.704)5592, provides for 5592 bytes of useful data (ETI(LI)data) corresponding to 1864 kbps. Further capacity up to the maximum bit rate of1920 kbps is occupied by 40 kbps allocated to FEC and 16 kbps used for managementand supervision purposes. These data include block counts used for frame synchronisa-tion, a further time-stamp related to an NA link and defining the frame delivery time atthe output of the respective converter from the NA layer to the NI or LI layer as well as aNetwork-adapted Signalling Channel (NASC) (see also section 6.3.3).
The respective figures of the alternative, the ETI(NA,G.704)5376, are 1792 kbps for LIdata, 112 kbps for FEC and again 16 kbps for management.
6.3.2 Network Architecture
According to [EN 300799], the DAB distribution network is unidirectional and logicallybased on point-to-multipoint connections. Figure 6.13 outlines this principle.
Because the radiated signals in the SFN have to be synchronised not only in frequencybut also in time with tolerances of a few microseconds, automatic delay compensation isone of the most important issues. Therefore GPS receivers are usually located at each siteinvolved to cater for the common time reference. Using the ETI(LI) time-stamps, it canbe ensured that the overall delay throughout the transport network is always the same forevery path between the ensemble multiplexer and a transmission site. Together with theinformation about the constant transmitter delay the ensemble multiplexer is able toevaluate the right time to schedule service providers and to signal time in FIC with regard
– Frame count– FIC flag– Number of streams– Frame phase– DAB mode– Frame length
– FIC data (if FIC flag set)
per stream (MSC sub-channel):– Stream data
– CRC – Time- stamp
per stream (SSTC):– Sub-channel Id– Start address in MSC– Type and protection level– Stream length
– MNSC– CRC
Framecharacterisation
End ofheader
End offrame
Streamcharacterisation
Time-stamp
Main stream data
STC EOHFC EOFMST TIST
Figure 6.12 Frame structure of Ensemble Transport Interface ETI(LI)
Collection and Distribution Networks 253
![Page 281: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/281.jpg)
to absolute time outside of the DAB network. See Chapter 7 (section 7.6.3) for detailsabout delay definitions and treatment.
Network adapters as depicted in Figure 6.13 are needed to convert ETI(LI) intoETI(NA) and vice versa. This functionality is often integrated in the respective devices.The additional NA time-stamp in principle allows for the retiming of NA links, forexample in the case of cascading ETI devices. Although support for distributed multi-plexing would be useful in some special scenarios, this leads to considerably extra effortregarding synchronised actions and signalling among the sites involved and is thereforenot considered further here.
The transport network in between the ETI network adapters can of course make use offurther bearer services than PDH as long as G.704 payload can be transported transpar-ently. For instance, additional terminal adapters to comply with SDH or ATM allow forthe use of the corresponding networks. Satellite transmission or radio links are also usedalternatively to terrestrial connections.
6.3.3 Network Operation
In the basic configuration, operation of the distribution network has to be performedfully automatically under control of the ensemble multiplexer. In contrast to the
Transport network delay
ETI(LI)
Transmitter delay
ETI(LI)
NetworkAdapter
GPS Receiver
COFDMModulator Transmitter
NetworkAdapter
GPS Receiver
COFDMModulator Transmitter
ETI(NA)EnsembleMultiplexer
NetworkAdapter
GPS Receiver
Figure 6.13 Typical DAB distribution network
254 Digital Audio Broadcasting
![Page 282: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/282.jpg)
collection network, control is straightforward without response from transmission sitesvia ETI due to unidirectional communication. The basic configuration of the distributionnetwork can be taken from the ensemble multiplexer using the signalling channels(MNSC, NASC, see also section 6.3.1) to channel encoders.
The MNSC provides for 2 bytes per 24 ms frame, that is 667 bit/s at maximum.Messages for frame synchronous and asynchronous signalling are defined formally inAnnex A of [EN 300799]. Frame synchronous signalling can be used to transfer timeinformation. Important applications of asynchronous signalling concern predefinition ofthe individual TII and transmitter offset delay (see also section 7.6.3).
In the case when ETI(NA) is applied, the NASC can be used additionally to commu-nicate between ETI(NA) network adapters. It has a capacity of 24 bytes per 24 ms, that is8 kbps. As for the MNSC, frame synchronous as well as asynchronous signalling havebeen defined in general, but no application is predefined so far.
During regular operation dynamic delay compensation and especially reconfigurationof the MSC controlled via ETI(LI) have to be managed automatically. Delay compensa-tion requires careful definition of delay figures and time reference in the network (seeabove) and will then work reliably.
Dynamic reconfiguration needs control of both the channel encoder and the receiveroperated in the coverage area of the respective SFN. Normally, changes have to beaccomplished inaudible to the listener and therefore require careful coordination.
Figure 6.14 outlines how this can be performed based on frame-related actions carriedout by the ensemble multiplexer, see also [EN 300401] and [EN 300799].
The signalling of multiplex reconfiguration starts in advance in the so-called prepara-tion phase lasting up to 6 seconds. During this time the ensemble identification (FIG 0/0)is extended by a byte signalling the instant of planned reconfiguration in terms of theframe count (occurrence change). Additionally the type of reconfiguration (sub-channel orservice organisation or both will be changed) is signalled by this FIG at each fourth frame.
In parallel, the current and the next MCI will be signalled at least three times to thereceiver using the respective FIGs marking its scope by means of the current/next flag. Inparticular, only the relevant part of the next MCI, which depends on the type ofreconfiguration in turn, is required to be signalled. For instance, only the next subchan-nel organisation FIGs (0/1) has to be sent in case the reconfiguration is restricted to thatpart of the MCI.
Service information related to the next configuration can also be optionally providedin advance during the preparation phase.
The channel encoder is controlled by means of the SSTC included in the headerof the ETI(LI) frame. As depicted in Figure 6.14, it is important to note how acertain sub-channel changes in the course of reconfiguration. Owing to the timeinterleaving process, stream data delivered via ETI(LI) will be spread over 16consecutive CIFs formed by the channel encoder. Therefore, sub-channels whichwill be removed or reduced in capacity at reconfiguration instant must be changedin ETI(LI) 15 frames before then.
The ensemble multiplexer has to ensure this by communicating with the respectiveservice provider(s) and taking into account resource allocation. Bit error measurementsaimed at single sub-channels, full transmission channel or telecommunication lines areusually based on pseudo-random binary sequences [EN 300799].
Collection and Distribution Networks 255
![Page 283: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/283.jpg)
6.4 Example of Implementation
As shown in previous sections, a good design of the entire network for the conveyance ofall necessary contributions is a prerequisite for successful DAB operation.
In 1999 a field test in Berlin proved that the designed system and its components wereworking properly. On the basis of that field test a simple example of implementationfocusing on the more challenging collection network will be presented in the followingsections, see also [Nowottne, 1998] and [Peters, 1999].
6.4.1 Operational Scenario
In the trial, STI service providers had to be allowed to operate their own servicecontributions and supporting signalling. The extent of the latter was comparable toFM/RDS, that is, both static information such as service labels, programme types andannouncement support, but also dynamic changing information such as supporting
occurrence change (frame r )
set
MCI2
MCI1
(SI2)
SI1
SSTC1
SSTC1
SSTC
SSTC1
framesETI(LI)
rr-15r-250
old ensemble
configuration 1
new ensemble
configuration 2
reconfigurationinstant
FICReconfigurationinstant
type reset
next MCI
current MCI
next SI
current SI
SSTC/MSTSub-channel
redefinition
insertionincrease
removal
decrease
reset
MCI2
SI2
SSTC2
SSTC
SSTC2
SSTC2
Control of DAB receiver
Control of DAB channel encoder
start of reconfigurationsignalling
MST Main Stream DataSSTC Single Stream Characterisation
Maximum preparation phase (6 s)
preceding
stream change
Figure 6.14 Commanding the ensemble reconfiguration via ETI(LI)
256 Digital Audio Broadcasting
![Page 284: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/284.jpg)
traffic announcements via STI. Decentralised initiation of reconfiguration was needed tostart broadcasting. To prevent failures, all specifications from the STI service providershad to be based on STI resource allocations provided via STI by the ensemblemultiplexerand had to be supported by appropriate tools. Additionally, non-STI service providershad to be integrated into the collection network.
Figure 6.15 shows the STI-based collection network as used in the field test. Forinstance, two STI service providers operate audio encoders MAGIC/STI for the genera-tion of audio streams, optionally including insertion of PAD. Other service providersfeed their service components to the ensemble multiplexer without using STI. Moreover,externally provided packet mode data stream, delivered in STI-D format, can be fed tothe ensemble multiplexer directly or inserted by the MAGIC/ STI service multiplexer.The MAGIC/STI interface to the ensemble multiplexer corresponds to STI(PI,G.704/2)and comprises both STI-D and STI-C with transport adaptation. As the ensemblemultiplexer the DM001/STI by Rohde & Schwarz was used. MAGIC/STI as well asDM001/STI are connected via RS232 with PCs, working as service controller andensemble controller, respectively.
As required, the system is also able to cater for non-STI service providers. In this casethe ensemble provider takes the role of a proxy relating configuration and signalling.
6.4.2 The Service Provider Profile
The efficient treatment of resource allocation and consistency checking in an operationalcollection network is based on so-called Service Provider Profiles (SPPs). This has to bedone by the ensemble provider in arrangement with service providers.
non-STI (G.703)
STI
(G.704/2)
STI
(G.704/2)
Service Provider 1
AudioPADData
ServiceController
Service Provider 2
Service Provider 6
Transport Net
Ensemble Provider
EnsembleController
DM001/STI
EnsembleMultiplexer
MAGIC/STI
ServiceMultiplexer
ETI(NA)
(G.704)
Figure 6.15 Structure of the collection network
Collection and Distribution Networks 257
![Page 285: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/285.jpg)
Each service provider is allowed to manage services independently within the con-straints of the SPP. It is the task of the ensemble multiplexer to supervise the serviceprovider’s actions to ensure impact-free running. The management processes are per-formed and monitored by means of the STI control part, on which the service controllerand ensemble multiplexer communicate.
Figure 6.16a outlines the contents of the applied SPP, as stored within the database ofthe ensemble multiplexer. These data comprise information on the service provider’saddress and basic entitlements, about capacity and coding resources, as well as otherparameters.
Figure 6.16b gives an idea of the way it works. It has to be distinguished betweencentral specification and decentralised application. SPPs specified and stored at theensemble provider are downloaded to the service providers and define their frame ofaction. The ensemble multiplexer supervises their operation, responds to change requestsand carries out the changes if possible. Otherwise it rejects requests or reacts with errormessages.
6.4.3 Equipment in Use
Two basic devices form the hardware basis in the 1990s of the introduced collection anddistribution network: the MAGIC/STI Audio Encoder and Service Multiplexer by Fa.
CU Capacity UnitsId IdentifierEPP Ensemble Provider ProfileFIC Fast Information channelFIDC Fast Information Data
ChannelSC Service ComponentSPP Service Provider ProfileFE FIG EncoderCFM Control File Manager
a) Content of SPP
b) Use of SPP
General
Capacity
Ids
– Provider (-type, -Id)– Valid time– Authorisation for FIC signalling
– MSC (CU)– FIC (%)– max. number of services, SCs,...– Streams
– Sub-channels– Services, SCs– FIDCs
CentralSpecification
(Ensemble Provider)
DecentralisedUse
(ServiceProvider)
Ensemble Configuration(Allocation of resources)
Stipulation forSTI-SPPi
Resource inuse
SpecificationFIGs (FE)
SpecificationMCI (CFM)
EPP
SPPnSPPiSPP1
Figure 6.16 Management by means of service provider profiles
258 Digital Audio Broadcasting
![Page 286: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/286.jpg)
Audio Video Technologies and the DAB Ensemble Multiplexer DM001/STI by Fa.Rohde & Schwarz complemented by their Frame Decoder FD1000 for monitoring andanalysis of both STI and ETI.
The structure and components of the Ensemble Multiplexer DM001/STI aredepicted in Figure 6.17. The common clock and time reference is provided by anexternal GPS receiver. The DM001/STI is connected via an RS232 interface to itsensemble controller. Using this computer-based device the ensemble controller soft-ware, running under WindowsNT�, supports STI-C-like communication with themultiplexer.
It is possible for the operator to define and download complete ensemble con-figurations each consisting of an EPP (Ensemble Provider Profile), several SPPs andall other ensemble-relevant parameters. To illustrate operation, the steps necessary
SP1SP2
SPn
STI
non-STI
GPS
DM001/STI
ETI(NA)(G.704)
STI-C
Back-channel
RS232
GUI
Ensemble Controller (PC)
SPP-/ EPPSpecification
Ensemble-Configuration
Input-Configuration
FIG-Encoder
DBEPP
ETI
FIG
GPS
MCI
SPP
STI
GUI
DatabaseEnsembleProvider ProfileEnsembleTransport InterfaceFastInformation GroupGlobal PositioningSystemMultiplexConfigurationInformationServiceProviderProfileService TransportInterfaceGraphical UserInterface
Timetable
Configuration Database(Ensemble-/MCI-/FIG-/Input-)
ProfileDatabase
Scheduler Monitor
Ensemble Multiplexer
Sync.,Demux
FIG-DB
SPP-/MCI-DB
FIC-Generation
Checkprocessing
Controller(Reconfiguration, Scheduler,..)
Generation
Figure 6.17 STI solution at the ensemble provider
Collection and Distribution Networks 259
![Page 287: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/287.jpg)
to start broadcasting from the very beginning at the ensemble multiplexer are listedin the following:
1. Basic configuration of the DAB ensemble multiplexer, including:
• definition of DAB mode and external clock source (2.048 MHz from GPS);• definition of transport network and transmitter delay;• definition of ETI type, for example ETI(NA,G.704)5592.
2. Specification of an ensemble configuration consisting of one EPP and several SPPs:
a) Specification of the EPP:
• allocation of ensemble identifier (EId) and ensemble label;• stipulations for the FIC (FIC capacity and FIGs allowed to send);• specification of a FIG file including FIGs for signalling of ensemble
information.
b) Specification of SPPs for all service providers:
• allocation of service provider identifier (SPId);• allocation of resources (MCI and FIC capacities, coding ranges, streams, etc.);• stipulations for the FIC (FIGs allowed to send, announcement parameters);• specification of physical input;
c) Additional specification of MCI and SI (for non-STI service providers only):
3. Manual or scheduled download of the ensemble configuration specified (includingvalid time).
The DM001/STI will then generate the ETI stream according to the specificationsdownloaded. A reconfiguration will be carried out and the STI-C(TA) controlconnections to the STI service providers will be opened. After that, the STI serviceproviders are able to define their virtual ensemble and to initiate reconfigurationsof their own.
Monitoring of the ensemble multiplexer can be done bymeans of the status windows atthe ensemble controller. Additionally a log file will be generated to store messages aboutall relevant events. A message browser for filtered evaluation of the log file is alsoprovided.
Figure 6.18 displays the conditions at the service provider side. The MAGIC/STIsystem provides not only sufficient audio encoding functionality but also realisa-tion of service multiplex, that is several services or service components can behandled.
MAGIC/STI basic units can be expanded by up to seven further encoders, if severalaudio signals are to be encoded at the same location. Encoders are also able to insertPAD into the audio data stream. Audio signals are fed either as analogue signals or asdigital AES/EBU signals.
260 Digital Audio Broadcasting
![Page 288: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/288.jpg)
The output interface complies with G.703/G.704 (2 Mbps). Additionally data servicesin packet mode format can be inserted via the STI-D input. Running underWindowsNT�, the service controller software consists of three major modules:
• main manager;• control file manager;• FIG encoder.
The main manager controls, in a central function, collaboration with the MAGIC/STIaudio encoder(s) and service multiplexer. It accepts inputs from the service provideroperator and serves to define and administrate the streams to be handled. It is also usedto specify scheduled actions, to establish event-triggered signalling and coordinate col-laboration with the control file manager and FIG encoder.
In its database the main manager stores all information relating to configurations andschedules. The control file manager complements the main manager in specifying andmonitoring the respective MCI configuration, the specification of the virtual ensemble.Based on the SPP the service provider operator is able to specify sub-channel and serviceorganisation, that is, assignment of bit rates, start addresses, protection levels and so on.Consistency of the defined configuration is checked immediately.
Service MultiplexerMAGICBasic/STI
STI(G.704 / 2Mbps)
Data
Control
RS232
Userinputs
Service Controller (PC)CFFIG
PAB
SPP
STI
Control FileFastInformation GroupProgramAssociatedDataServiceProviderProfileService TransportInterface
Timetable
Configuration Database
STI-Multiplexer andNetwork-Interface
SchedulerMain Manager
Trigge-ringof Con-ditionalFIGs
CF-Manager(MCI-Config.
Protocol)
MAGICConfiguration(Encoder, STI)
FIG-Encoder
(FIG Config)
SPP
DAB Encoder
DAB Encoder
Data
Audio [PAD]
Audio [PAD]
Figure 6.18 STI solution at service provider
Collection and Distribution Networks 261
![Page 289: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/289.jpg)
The task of the FIG encoder is to provide FIG data for insertion into the FIC of theDAB signal. Since FIC data originate at the service provider and at the ensembleprovider as well, the FIG encoder can be used by both sides equally. At the serviceprovider side the FIG encoder supports the encoding of static and quasi-static FIG data.Resulting FIGs are embedded within FIG files and transported via STI-C to the ensem-ble provider in order to be stored there and passed into the ETI data stream if activated.Conversely, FIG data from the ensemble multiplexer database can be recalled anddepicted for monitoring purposes. In order to initiate signalling via the FIG file mechan-ism, the service provider software can be coupled to the studio control process. Forinstance, announcement switching can be event triggered accordingly.
Furthermore, precautions have been implemented to adapt the whole network solu-tion to a separate quality supervision system of the DAB network operator.
262 Digital Audio Broadcasting
![Page 290: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/290.jpg)
7
The Broadcast Side
7.1 General
This section explains the broadcast side of DAB without touching upon the issue ofsignal delivery to the different transmission sites of the network since this was covered inthe previous chapter. DAB transmission networks can have national, regional or localcoverage. Depending upon specific national, geographical and financial requirements,Band III or L-Band frequencies may be used for these networks.
The rest of this chapter is structured as follows: Section 7.2 gives an introduction to DABnetworks, highlighting the major differences of DAB networks compared to conventionalFM networks and explaining the concept of a single frequency network (SFN). The parti-cularities of SFNs are then described in section 7.3. The equipment needed on the transmittersite to set up SFNs and the associated specifics are presented in section 7.4. Section 7.5 dealswith the transmission channel limitations due to RF signal propagation, illustrates thereasons behind the choice of 1.5 MHz bandwidth for the DAB system and describes thepropagation model used with the DAB system. The following section 7.6 treats the aspectsto be considered when planning networks with SFN coverage and section 7.7 discusses theissues of coverage evaluation and monitoring for SFNs. Finally, aspects of frequencymanagement and frequency allocation for DAB networks are covered in section 7.8.
7.2 Introduction to DAB Networks
7.2.1 Difference between FM and DAB Networks
Planning of transmission networks forFMbroadcasting is traditionally based on the conceptofmultiple frequency networks (MFNs). In anMFN, adjacent transmitters radiate the sameprogrammebut operate on different frequencies to avoid interference of the signals where thecoverage areas of different transmitters overlap. Basic FM receivers cannot cope withinterfering signals from other transmitters of the same network using the same or nearbyfrequencies. Coverage planning for an FM network requires frequency planning for thedifferent transmitter sites, to optimise use of the scarce resource: RF frequencies.
Digital Audio Broadcasting: Principles and Applications of DAB, DAB+ and DMB, Third Edition Edited by W. Hoeg and T. Lauterbach© 2009 John Wiley & Sons, Ltd. ISBN: 978-0-470-51037-7
![Page 291: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/291.jpg)
DAB in contrast allows single frequency networks (SFNs), where all transmitters ofthe network transmit exactly the same information on the same frequency. The maincondition for a working SFN is that all transmitters are synchronised to each otherin frequency and fulfil certain time delay requirements which will be explained later inthis chapter. Coverage planning for a DAB network requires time delay planningbetween the different transmitters instead of frequency planning as in the case of FM.The SFN capability of DAB allows complete coverage of very large regions without thereceiver having to tune to a different frequency while moving around in the area.
In contrast to FM broadcasting, DAB transmits typically five to seven differentprogrammes in one single ensemble on one frequency and all programmes contained inthat multiplex share the same coverage area. Distinction by coverage area is therefore notpossible for radio stations whose programmes share the same multiplex.
Although possible in principle, it is not advisable in an SFN to introduce localwindows, that is, areas where some transmitters of the SFN radiate a slightly differentmultiplex to achieve local programme variation. Local windows cause problems forthe receiver in the overlap area of the differing programmes of the multiplex since itcannot determine which programme to select. The gain in planning flexibility for localprogrammes would not compensate for the overall loss of coverage in the network.
7.2.2 Single Frequency Networks
7.2.2.1 Why SFNs are Possible with DAB
DAB is a digital broadcasting system which was developed especially for the challengingtransmission characteristics of the mobile radio channel. Typical phenomena of thischannel like Doppler shift and multipath propagation with the resulting time andfrequency selective fading had to be taken into account while developing DAB. Tocope with these problems, the guard interval was introduced between consecutive datasymbols, time and frequency interleaving techniques were applied to the data stream, achoice of sub-carrier spacings in the multicarrier modulation scheme was introduced andchannel coding techniques were applied to correct for transmission errors. Table 7.1
Table 7.1 Problems of mobile radio transmission systems and their solution in DAB
Problems DAB Solution
Time-dependent fading (multipathwhile driving)
Time interleaving
Frequency-dependent fading
(stationary multipath)
Broadband system with frequency interleaving
Doppler spread (speed dependent, whiledriving)
Sub-carrier spacing increased as a function of thetransmission frequency
Delay spread (due to multipath) Guard interval (allows SFNs)Transmission errors RCPC (Rate Compatible Punctured
Convolutional) codes and Viterbi decoding to
reconstruct the original bit stream
264 Digital Audio Broadcasting
![Page 292: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/292.jpg)
shows the most important problems of mobile radio transmission systems and how theyare alleviated in DAB.
The DAB system is a very robust and frequency economical transmission systemwhich enables correct decoding of information despite Doppler spread and multipathreception. The effect of multipath reception is depicted graphically in Figure 7.1. Boththe direct signal from the transmitter and reflected signals arrive at the antenna of areceiver.
All signals contain identical information but arrive at different instances of time.Owing to the measures previously described, the DAB receiver is able to cope withthese multipath signals.
Going a step further, it is now irrelevant for the receiver whether the delayed signals wereoriginated by the same transmitter or come from another transmitter that transmits exactlythe same information synchronised in time as shown in the second part of Figure 7.1. Thismeans that DAB allows coverage of any area with a number of transmitters that transmitthe identical programme on the same frequency. Such broadcast networks are called singlefrequency networks.
The SFN capability of DAB transmission networks can be seen as an extra benefitwhich is an implicit result of the initial requirement during the development of DAB tocope with multipath phenomena typical of mobile radio reception.
7.2.2.2 Power Economy of SFNs
Owing to the properties of the system, DAB receivers can use all signals received in anSFN in a constructive manner. This works as long as all signals arrive within the guardinterval. Signals with longer delays create self-interference problems in the SFN andmustbe avoided by careful network planning.
Moreover, SFNs also bring the benefit of space diversity due to the fact that trans-mitters are located at different locations in the network. The diversity effect, resultingfrom the fact that the probability of simultaneous shadowing in the presence of severalsignals is much lower than the probability for shadowing for a single signal, contributesan additional statistical network gain.
Multipath reception SFN reception
Figure 7.1 SFN capability of DAB
The Broadcast Side 265
![Page 293: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/293.jpg)
DAB networks are therefore very power economical. The advantages offered bySFN operation and the properties of the digital transmission system itself, allow lowertransmitter powers compared to FM for the same coverage quality. Power savings canbe as high as 10 dB. Figure 7.2 shows this effect in a qualitative manner. To cover thesame area with one programme on the same frequency, FM needs one high-powertransmitter, whereas DAB with an SFN network with several transmitters needs muchlower transmitter power in total. Another effect of the DAB SFN compared to FMnetworks is the much lower spill-over resulting from the steeper field strength slope at theedge of the coverage area as illustrated in Figure 7.2 which reduces unwanted interferencein neighbouring networks.
7.2.2.3 Frequency Economy of SFNs
The fact that SFNs allow coverage of large areas occupying only a single frequency inthe spectrum results in highly frequency economical planning possibilities for complexbroadcast landscapes. The SFN technology also allows successive improvement of coveragequality without having to re-plan frequency allocations. Coverage problems within thenetwork can be solved by simply putting up additional transmitters. The additional planningthat must be done is to check the timing constraints of the SFN to avoid violation of thetiming budget given by the guard interval of the chosen DAB transmission mode. Note thatextra care must be taken to avoid an impact on reception in distant parts of the networkbecause of spill-over from the additional transmitter during abnormal propagationconditions. Frequency planning for DAB is dealt with in detail in section 7.8.
DAB SFN Transmitters
Power distribution due to network gain
Power distribution of a singletransmitter
Interference for neighbouringnetworks
Position
Power
FM Transmitter
Coverage area
Power
Position
PFM
PDAB
(S/N)min DAB
(S/N)min FM
Figure 7.2 Power economy of DAB SFNs in comparison to FM
266 Digital Audio Broadcasting
![Page 294: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/294.jpg)
7.3 Particularities of Single Frequency Networks (SFNs)
7.3.1 Review of COFDM Principles
As stated earlier in the chapter, COFDM was originally intended to provide successfulreception inmultipath propagation conditions arising from reflected signals, but it worksequally well for reception of multiple transmitters carrying the same signals. This givesrise to the possibility of an SFN, in which all transmitters carry the same information atthe same time (or nearly the same time). Important factors for successful implementationof SFNs are the accuracy of the frequency and the timing of each transmitter. In addition,the length of the guard interval is important for an SFN implementation, because itinfluences the allowable range of transmitter spacing (see also section 7.6.6).
7.3.2 Time and Frequency Synchronisation
For an SFN to operate effectively, the transmitters must deliver the DAB signal to thereceiver at the same time, or nearly the same time, and at the same frequency.
Frequency errors between the transmitters cause a loss of orthogonality between thereceived carriers, and also reduce the receiver’s tolerance to the Doppler spread effectsexperienced in mobile reception.
Timing errors between transmitters erode the guard interval of the composite receivedsignal, and can therefore disrupt the performance of the SFN.
For these reasons, transmitter networks are normally specified to keep transmitterfrequencies within 1% or so of the carrier spacing, and timing within a few per cent ofthe guard interval. In order to achieve this, an independent and ubiquitous time andfrequency reference is required. Global Positioning System (GPS) receivers are commonlyused for this purpose. These receivers offer time and frequency references, typically 1 pulseper second (pps) and 10 MHz signals, with an accuracy well in excess of that requiredfor DAB SFNs. The 1 pps signal is used to define the transmission time of the data, and the10 MHz signal is used as a reference for LO synthesisers that determine the final radiofrequency.
7.3.3 Network Gain
If two or more transmitters serve the same area, their signal strengths are, in general, notstrongly correlated. The signal strength of the transmitters varies with location, butbecause the signals are not strongly correlated, an area of low signal strength from onetransmitter may be ‘filled’ by higher signal strength from another transmitter. In RDS(Radio Data System, used in FM networks to carry additional information), this isexploited by allowing the receiver to retune to alternative frequencies carrying the sameprogramme if reception of a particular frequency is poor, which is called frequencydiversity. However, unless two receiver front-ends are used, the receiver has to retunewithout prior knowledge of whether the alternative frequencies will offer greater signalstrength.
In a DAB SFN, retuning is not necessary. For multiple transmitters on the samefrequency, it remains true that an area of low signal strength from one transmitter may be
The Broadcast Side 267
![Page 295: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/295.jpg)
‘filled’ by higher signal strength from another transmitter. This is a form of ‘on-frequency’diversity, in which the receiver does not have to retune, although it may adjust itssynchronisation to make best use of the available signals. Moreover, beyond thisstatistical effect, with DAB the individual field strengths add up constructively to forma wanted sum field strength which exceeds the field strength of each individual signal.
Another way of looking at this phenomenon is to consider the aggregate strength ofthe composite signal from a number of transmitters. This varies less with location thanthe signal strength from any of the individual transmitters, or in statistical terms, thevariance of the strength of the composite signal is lower.
This effect offers a major advantage. In a multiple frequency network, a number oftransmitters may provide signal strength to an area without providing adequate cover-age. This is less common in SFNs because of the tendency of two or more transmitters tofill each other’s coverage deficiencies. This results in the coverage of an SFN beinggreater than the sum of the coverages of its individual transmitters, and is often knownas ‘network gain’. A detailed discussion of the additive and statistical components ofnetwork gain can be found in [BPN 066].
7.3.4 Self-Interference in DAB Networks
Nearby transmitters on the same frequency have a constructive effect, but in a large SFN,the more distant transmitters, whose signals may arrive outside the guard interval, canact as interferers. This effect is called self-interference. Although it is possible for signalsarriving just beyond the guard interval to contribute some useful energy, they will at thesame time contribute to the interfering power and this latter effect will in most cases bepredominant. This is a complicated issue influenced by the design of the receiver, andtherefore the effects are somewhat variable. More information about signal summation,signal synchronisation and the treatment of constructive and destructive signal compo-nents can be found in [Brugger, 2003], [BPN 066].
Transmitter spacing is therefore a factor in network design, but in practice the avail-ability of suitable transmitter sites, topography and population density are also majorinfluences. For Band III SFNs, usingMode I, transmitter spacings are usually somewhatsmaller than the distance corresponding to the guard interval (around 75 km). This mayresult in many transmitters contributing useful energy under favourable circumstances,but in SFNs above a certain size there will always be potential for interference fromdistant transmitters. Because of this, SFNs have to be planned taking very carefulaccount of the interference caused by transmitters to distant locations, as well as thecoverage provided in their immediate surroundings. More information about maximumtransmitter spacing as function of the DAB Mode is given in Table 7.10.
7.3.5 Optimised Coverage of SFNs
Although the transmitters in an SFN need to deliver the signals with very precise timing,it is not always necessary for them to be exactly co-timed, and in some circumstancesit can be advantageous to offset the timing of particular transmitters by significantfractions of the guard interval. This is particularly true at the extremities of coverage,
268 Digital Audio Broadcasting
![Page 296: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/296.jpg)
or where low-power transmitters are used to fill gaps within coverage provided primarilyby high-power transmitters. Transmitter timing is a variable in network design and canbe used in combination with transmitter powers and directional radiation patterns tooptimise the coverage of the network. An example is given in section 7.6.4.
7.3.6 Closure of Coverage Gaps Using Gap Fillers
In conventional MFNs, as used for FM broadcasting, coverage gaps are closed withadditional transmitters, which need their individual frequency assigned. This requirescareful planning to ensure that incoming and outgoing interference is correctly managed.This is often not economical from the frequency spectrum point of view.
SFNs, however, allow relatively simple filling of areas not well served by the maintransmitters, that is, gaps in the coverage area, by installing low power on-channelrepeaters located inside the coverage area which operate on the same frequency as therest of the SFN (see Figure 7.3). Typical under-served areas include zones shadowed bynatural or man-made obstructions such as valleys, tunnels and in cities blockages behindtall buildings.
These additional re-transmitters with a typical output power of the order of a fewwattsare called gap fillers or repeaters. A gap filler is simple to construct and install since itrequires relatively small power and can be mounted on a small tower or on the roof of abuilding. The receiving antenna of the gap-filler should be highly directional withreduced back lobes, while the re-transmitting antenna will generally be tailored to thespecific characteristics of the shadowed area. Gap fillers must be located at points in thenetwork where there is sufficient incoming field strength and where the re-transmittingantenna can be directed towards the as yet uncovered area of the SFN.
In the Canadian DAB networks more powerful re-transmitters with an output powerof up to 100 W are also used. This type of device is called a coverage extender since it istypically located at the fringe of the network and fires beyond the coverage area of amain
Receive antenna
Transmit antennaGap filler
DAB TransmitterArea not served by the maintransmitter due to shadowing
Figure 7.3 Typical application of a DAB gap filler
The Broadcast Side 269
![Page 297: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/297.jpg)
transmitter. Coverage extenders enlarge the total area of the SFN instead of servingregions not well covered owing to local shadowing as gap fillers do. Regarding planningand synchronisation aspects, the same rules apply to both sets of devices. However, gapfillers must meet more stringent delay and transmission power requirements since theyare typically not located at the fringe of the coverage area and their signal can more easilyinterfere with the signal of the main transmitter(s).
Figure 7.4 illustrates the rule that governs the use of gap fillers within the coveragearea of a single main transmitter, rated in this example at 25 kW effective radiatedpower (e.r.p.). In the case of DAB, this rule is closely related to the size of the guardinterval (in Figure 7.4, Mode II is used with a 62 ms guard interval). An omni-directionalre-transmitting antenna is assumed at the gap filler to cover the worst case situation. Thepropagation model of Recommendation ITU-R P.1546 was used for this exercise,assuming flat terrain with a roughness factor of Dh¼ 50m. The domain of operation isunder the curves. If the e.r.p. of the gap-filler exceeds the values shown by the curves at agiven distance from the main transmitter and for a given gap-filler, an unserved areastarts to appear between the main transmitter and the gap-filler due to the presence of thedestructive echo in this area.
In some cases, an alternative to gap filling would be to increase the power and/or theantenna height of the main transmitter. Apart from the cost implications, this would alsoincrease interference to co-channel services in other areas, and thus, limit implementation
20 25 30 35 40 450
10
20
30
40
Max
imum
gap
fille
r E
RP
(dB
W)
Distance from main (km)
Gap filler HAAT150 m100 m
75 m50 m30 m
Figure 7.4 Domain of operation of a gap-filler as a function of distance, HAAT and e.r.p.
270 Digital Audio Broadcasting
![Page 298: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/298.jpg)
of such a high-power DAB service, or reduce spectrum reuse efficiency. The use of gapfilling transmitters therefore contributes to spectrum conservation.
Gap fillers do not have to be exactly time synchronised to the other transmitters inthe SFN. The gap filler simply amplifies the received DAB signal. To achieve goodperformance the received signal may be downconverted to an IF or even baseband forsignal conditioning before it is upconverted again for final amplification and filtering.De- and re-modulation for signal improvement are not done in gap fillers because theprocessing delay inherent in the DAB system means that the retransmitted signal wouldlie outside the guard interval irrespective of the DAB mode chosen. When a gap filler isinstalled, it must be ensured that the transmit and receive antennas are sufficientlydecoupled to avoid unwanted feedback and blocking effects. In general, the necessaryisolation between receiving and transmitting antennas determines the upper limit for theamplification gain. At higher frequencies such as L-Band, large shadowing buildings inurban areas can provide some of the necessary isolation.
In areas where several DAB blocks are in use, the input stage of the gap filler must beblock selective to guarantee that only the wanted signal is amplified. It is also possiblethat the gap filler could be used to amplify a number of blocks to cover the same gap.Proper filtering will be needed to avoid intermodulation. It should also be noted that inareas with gap fillers in a DAB network, geographical position estimation of the receiverusing the TII feature will not be possible for two reasons: first, because the transmittertime delay signalled in FIG 0/22 (TII field) is only valid for directly received signals, andnot for signals which suffer from the additional delay due to the signal processing in a gapfiller; and secondly, if the signal from the main transmitter and one or more gap fillers issimultaneously received, distinction of the different signal sources will no longer bepossible since they will all have the same TII identification. (Gap fillers cannot changethe TII information of the signal.) For more information on TII in DAB see section 7.3.7.
7.3.7 Application of the TII Feature in SFNs
DAB allows identification of individual transmitters in an SFN with the TII feature. TheTII signal is transmitted every other null symbol to allow the receiver to perform channelstate analysis in null symbols without the TII signal. The TII signal consists of a certainnumber of pairs of adjacent carriers of an OFDM symbol and the actual pattern of thecarrier pairs identifies the individual transmitter.
The identification of each transmitter is given by two parameters: the pattern andcomb number, also called the main and sub-identifier of a transmitter. FIG 0/22 in theFIC of the DAB signal describes a set of parameters, the TII field, which contains allinformation necessary for the unique description of a transmitter. These parameters aretransmitter identifiers, geographical location of the transmitter and the time offset of thetransmitter (see section 7.6.4).
The main identifier is used to describe a cluster of transmitters in a certain region andeach transmitter within a cluster has its own sub-identifier. Table 7.2 gives the number ofpossible main- and sub-identifiers as a function of the DAB mode.
Each comb number identifies a number of carrier pairs of which only half is used in aTII symbol. Which of the carrier pairs are used is determined by the associated pattern
The Broadcast Side 271
![Page 299: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/299.jpg)
number. Since each comb number identifies a unique set of carrier pairs (i.e. each carrierpair is only used by a specific comb), the DAB receiver can simultaneously identify thesignals of all transmitters with the same main identifier, that is, pattern number. Todistinguish between transmitters with different main identifiers, the sub-identifier mustbe chosen carefully to avoid ambiguities. The exact relationship between comb andpattern is given in references [EN 300401] and [TR 101497].
The TII feature of DAB allows the receiver to calculate its position if signals from atleast three transmitters are received and FIG 0/22 (TII field) is signalled in the FIC[Layer, 1998]. The knowledge of the receiver position can be used for intelligent change offrequency when leaving the coverage area of the network. It can also aid the automaticselection of information, for example only information relevant for the current region isdisplayed.
7.4 DAB Transmitters
7.4.1 General Aspects
Figure 7.5 shows the block diagram of a DAB transmitter. Each transmitter consists ofa number of functional blocks which will now be explained. The ETI output signal fromthe ensemble multiplexer is delivered to the transmitter site via the DAB distributionnetwork. At the input of the transmitter the signal is buffered and a precise delay isinserted to synchronise the SFN in time. After COFDM encoding the baseband outputsignal of the COFDM encoder can be subjected to further signal processing for non-linear pre-distortion or crest factor manipulation before it is converted from digital toanalogue. After conversion to the analogue domain the signal is upconverted to thedesired final radio frequency. Finally the RF signal is amplified and filtered to fulfil therelevant spectrum masks before it is radiated.
Table 7.2 Tll parameters for different DAB modes
Mode Number of Main Number of Number of Carrier PairsIdentifiers Sub-identifiers Used per Comb(= diff. patterns) (= diff. combs)
1, IV, II 70 24 4 of 8III 6 24 2 of 4
ETI 1
ETI 2 Toantenna
COFDMmodulator
RFupconversion
I/Q modulationand DAC
Amplificationand filteringDIQ
Figure 7.5 Block diagram of a DAB transmitter
272 Digital Audio Broadcasting
![Page 300: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/300.jpg)
7.4.2 Signal Processing Blocks of a COFDM Modulator
COFDM modulators usually contain not just the pure DAB signal processing part butalso an input stage to process the different variants of the ETI signal and to insertthe required signal delay. The output signal of the modulator is either the DIQ (DigitalIn-phase and Quadrature) baseband signal according to [EN 300798] or an RF signal ata convenient IF or RF if an I/Q modulator is included. The signal processing blocks of aCOFDMmodulator are shown in Figure 7.6 and described in the following paragraphs.
The input stage strips the ETI signal (both ETI(NI) and ETI(NA), see Chapter 6)down to the ETI(LI) level, the logical interface level, as described in [EN 300799]. Sincethe ETI signal is transmitted in HDB3 format, it is also converted to TTL level in theinput stage. If the modulator has two inputs to allow networks with redundant distribu-tion paths, both inputs are monitored for signal quality in this stage of the modulator andselection of one of the two input signals for further processing is carried out here.
In the delay compensation section the input signal is delayed within a range of zero tosometimes more than one second, typically in steps of 488 ns (488 ns are convenientlyavailable in the system since they are the period of the ETI signal which is delivered at a rateof 2,048 Mbps). For dynamic delay compensation, the time-stamp of the ETI(NI) or theETI(NA) is evaluated using the 1 pps (pulse per second) signal from a GPS (GlobalPositioning System) receiver as time reference. The information for an automatic staticdelay compensation is transmitted in the MNSC (Multiplex Network Signalling Channel)of the ETI. This delay is called transmitter offset delay and can be set for each transmitterindividually making use of the unique encoder Id. The user can also set a separatelyadjustable delay for each input which is referred to as manual delay compensation.Combinations of the different methods of delay compensation are possible. A detailedtreatment of the different delays in a DAB network is given in section 7.6.4.
The channel coding block performs all the encoding necessary to achieve a high level ofsignal robustness and to allow error correction in the case of bad transmission. Energydispersal, convolutional encoding, MSC (Main Service Channel) time interleaving, MSCmultiplexing, transmission frame multiplexing and frequency interleaving according to[EN 300401] are performed in this block.
In the OFDMmodulation block, the output bit stream from the channel coding blockis mapped on to DQPSK (Differential Quadrature Phase Shift Keying) symbols, beforex/sin x pre-correction for the digital-to-analogue conversion is performed. Finally the
(Optional)
ETI 1
ETI 2IF/RFInput
unitDelay
compensationChannelencoding
OFDMmodulation
I/Qmodulation
Systemcontroller
Powersupply
Time andfrequency
reference (GPS)
DIQ
Figure 7.6 Block diagram of a COFDM modulator
The Broadcast Side 273
![Page 301: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/301.jpg)
IFFT (Inverse Fast Fourier Transformation) with generation of phase reference symbol,TII (Transmitter Identification Information) and guard interval are performed togenerate the DIQ baseband signal.
The DIQ baseband signal can be used to perform further signal processing like non-linear pre-correction or crest factor manipulation. To complete the COFDMmodulator,a system controller and power supply are needed and an I/Q modulator may beincorporated.
7.4.3 Digital-to-analogue Conversion
The output from the digital processing, and thus the input to analogue processing in thetransmitter, is nominally the DIQ signal defined in [EN 300798]. This standard specifies aresolution for the I and Q signals of 8 bits, and a ‘clip-to-RMS’ ratio for these signals of12 dB. This specification is intended to allow digital and analogue sections from differentmanufacturers to work together. However, many manufacturers supply both sections,and internally may use slightly different settings (e.g. higher resolution to reduce thequantising noise floor, or a different clip-to-RMS ratio).
The example transmitter in Figure 7.7 shows individual baseband I and Q chains, eachconsisting ofDAC and baseband filtering, followed by upconversion to a final frequency,amplification, and band-pass filtering.
In this arrangement it is important that DACs (digital-to-analogue converters), filter-ing and upconversion paths for I and Q signals are very closely matched, in amplitudeand phase, across the bandwidth of the baseband I and Q signals. Any imbalance willresult in distortion of the final RF signal, resulting in additional in-band components thatwill raise the in-band noise floor.
Further considerations include the phase accuracy of the in-phase and quadraturelocal oscillator signals, and the linearity of the upconversion mixers. Low-level
DIQ
DACs IQ modulator Band-passfilter
To Antenna
LocalOscillator
I
Q
900
Low-passfilters
Poweramplifier
Figure 7.7 Example block diagram of a DAB transmitter with DIQ baseband input
274 Digital Audio Broadcasting
![Page 302: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/302.jpg)
breakthrough of the local oscillator, at the centre frequency of a DAB signal, can betolerated because this carrier position is not modulated.
Most early implementations of DAB transmitters used this approach, and with carefulalignment very good results can be achieved. One of the advantages of the approach isthat transmitters at Band III can be implemented by a single up-conversion to the finalfrequency, avoiding the need for IFs requiring filtering and further upconversion.
An alternative technique, in which the upconversion to a low IF (normally a fewMHz)is performed in the digital domain, is illustrated in Figure 7.8. This is also commonand avoids the need for closely matched DACs and filters. In addition, highly accuratelocal oscillator (LO) quadrature can be achieved, and LO breakthrough is eliminated(although this is not a major problem for DAB). However, further upconversion isrequired in this case.
With the advent of ever faster DACs it is at the time of writing becoming possibleto develop direct conversion transmitters as shown in Figure 7.9. Band III transmittersdo not need an IF any more; for L-Band, up-conversion from a convenient Band IIIfrequency will still be necessary for a while. The advantage of the direct conversionconcept is its simplicity and the minimum amount of circuitry needed. However, LO-pulling and carrier leakage must be addressed in the design. LO-pulling occurs since theoscillator in the frequency synthesiser operates at the same frequency as the poweramplifier. Due to the limited reverse isolation, the transmitted output signal couplesback into the oscillator thus degrading its performance.
One further factor to be taken into account is the spectral purity of the oscillators usedin the transmitter, most commonly expressed as single-sideband phase noise (or ‘phasenoise’ for short). OFDM systems are tolerant of phase noise to some extent, but beyondcertain limits suffer from adverse effects.
The first effect is mainly due to oscillator phase noise at frequency offsets equal to, orgreater than, the carrier spacing of the OFDM system. This contribution to the phasenoise causes leakage of the carriers into one another. The carriers are no longer genuinely
Topower
amplifier
DAC Low-passfilter
IQ modulator Band-passfilter
I
900
Upconverter
Q
DIQ
Figure 7.8 Block diagram of DAB transmitter using low IF
The Broadcast Side 275
![Page 303: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/303.jpg)
orthogonal, and cause a small amount of interference to one another. This phenomenonis therefore often termed ‘intercarrier interference’.
The second effect is mainly due to oscillator phase noise at frequency offsets less thanthe carrier spacing. Because the data are carried by changes in phase between successivesymbols, the phase noise causes a reduction in the inherent signal-to-noise ratio. Thiseffect is often termed ‘common phase error’, because it affects all carriers equally.
The effects of oscillator phase noise in OFDM systems can be analysed in detail forindividual oscillator characteristics using weighting functions (e.g. [Stott 1996]), but forpractical purposes, common phase error is normally the dominant effect inDAB systems.Good engineering practice requires that the degradation of signal-to-noise due to thetransmitter from these effects is minimised, and a common rule of thumb is that the phasenoise should be no more than –60 dBc/Hz at an offset of 25% of the carrier spacing[TR 101496].
7.4.4 RF Upconversion
As noted above, upconversion is required if the in-phase and quadrature signals aremodulated onto an IF rather than the final RF. This applies for some Band III trans-mitter implementations, and most if not all L-band implementations. Most of theconsiderations discussed above apply equally to the upconversion process, includingmixer linearity, spectral purity of oscillators, and frequency response of band-pass filtersused to remove LO breakthrough and image products.
7.4.5 Amplification and Filtering
Because COFDM is a multicarrier system, an important cause of signal distortion isamplifier non-linearity. This causes intermodulation between the carriers, giving rise toRF products both within the bandwidth of the COFDM signal itself, and also in adjacentchannels (Figure 7.10).
Topower
amplifier
DAC Low-passfilter
IQ modulator
I
900
Q
DIQ
Figure 7.9 Block diagram of a direct conversion DAB transmitter with fast DAC
276 Digital Audio Broadcasting
![Page 304: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/304.jpg)
The difference between the spectral density of the COFDM signal and the out-of-bandintermodulation products is often referred to as ‘shoulder height’ (in Figure 7.10, forexample, the signal distortion due to the non-linearities of the power amplifier hasresulted in a shoulder height of 26 dB). Control of out-of-band products is important,because their level affects the performance of other signals in the adjacent channel.
The in-band intermodulation products are hidden by the COFDM signal itself, buttheir level is typically around 3 dB higher than the shoulder height of the out-of-bandproducts immediately adjacent to the ensemble. These products limit the performance ofthe DAB transmission, because they represent a ‘noise floor’ that cannot be removed inthe receiver. Accordingly, transmitters are designed to ensure that the in-band ‘floor’ issufficiently low that its impact on system performance is minimal.
Having chosen the acceptable level of in-band ‘floor’, a similar level of out-of-bandproducts will be generated. However, to ensure efficient use of spectrum, [EN 300401],[EN 302077] and other standards require a much lower level of out-of-band emission bythe transmitter, and this can be achieved only by external band-pass filtering. Theattenuation requirements of the filter depend on the level of out-of-band emissions atthe output of the amplifier, and therefore on the linearity of the amplifier and precedingstages. As a result, one of the major design decisions in a DAB transmitter is the trade-offbetween filter performance and amplifier linearity.
The most efficient amplifiers tend to be highly non-linear, and are not suitable forDAB. Conversely, highly linear amplifiers tend to be inefficient. Most DAB transmittersare designed so that the final power amplifier is the dominant non-linearity in the system,which allows it to be as efficient as possible. Even so, this amplifier requires a ‘back-off’ ofseveral dB (i.e. the output power of the DAB signal is several dB below the saturated
1,536 MHz
Shoulder height afterthe power amplifier
Shoulder height beforethe power amplifier
234 235 236 237 238Frequency [MHz]
−20
−30
−40
dB −50
−60
−70
−80
Figure 7.10 Spectrum of DAB signal with amplifier non-linearity
The Broadcast Side 277
![Page 305: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/305.jpg)
output power of the amplifier when passing an unmodulated RF signal). For solid stateamplifiers, the back-off is typically between 6 and 8 dB.
Operating amplifiers in this fashion results in a shoulder height of 25 to 30 dB. In orderto meet the out-of-band spectrum requirements of [EN 300401] and [EN 302077], high-order passband filters are required (e.g. in Band III eighth-order filters are commonlyused). These filters are normally the dominant cause of frequency selective effects in theDAB transmitter, in terms of both amplitude and phase (although baseband filters canalso have an influence). Phase effects in particular need to be kept within acceptablelimits. If this is not done, the performance of the DAB system can be degraded (e.g. alarge spread of group delay across the ensemble can reduce the useful guard interval atthe receiver).
Owing to the expense of high-power filters and amplifiers, recent years have seen muchinterest in improving the efficiency of DAB amplifiers without adversely affecting thespectrum. Analogue pre-correction techniques, in use in broadcast transmitters for manyyears, are now being replaced by more sophisticated techniques such as closed-loopsystems and various pre-conditioning or adaptive pre-correction methods implementedlargely in the digital baseband domain. One of the techniques is to apply non-linear pre-correction to the signal to linearise the nonlinear power amplifiers. As a result the in-band‘noise floor’ and the out-of-band emissions are reduced, the latter giving much bettershoulder heights of the output spectrum. Another technique is crest factor manipulationwhich can be used to achieve significantly higher output power of the transmitter.However, crest factor manipulation degrades the overall system performance due toadditional signal distortion. It should only be applied in combination with nonlinearpre-correction techniques since they improve the overall system performance.
7.5 Radio Frequency Propagation Aspects
The design, the complexity and, as a consequence, the cost of a DAB system is stronglydependent on the factors affecting the propagation characteristics of the transmissionchannel to the vehicular receiver, the indoor receiver, the portable receiver and thestationary receiver; in decreasing order of difficulty. The propagation path is subject toattenuation by shadowing due to buildings, trees and other foliage and to multipathfading due to specular reflections and diffuse scattering from the ground and nearbyobstacles such as trees and buildings (see section 2.1). The degree of impairment to thereceived signal depends on the operating frequency, the receiving antenna height and thetype of environment in which the receiver is operating: whether it is an open, rural,wooded, mountainous, suburban or dense urban environment.
This section deals first with the characteristics of an impaired RF channel before itdescribes the propagation and channel models used to obtain a coverage prediction.
7.5.1 The Impaired RF Channel
The radio frequency channel encountered in DAB reception can be characterised as atime-variant multipath channel. Apart from the direct signal, additional reflectionsarrive with a certain time delay at the location of the receiver, superpose and build a
278 Digital Audio Broadcasting
![Page 306: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/306.jpg)
more or less complex wave field with a varying power density which can be described by aRice or Rayleigh distribution (for more details see section 7.5.2). This multipath field istime-variant, even if the receiver is not in motion since the environment in which thesignals propagate and which give rise to reflections cannot be regarded as fixed.Normally, this time-variance is slow and the Doppler spread going along with it is notremarkable. However, it accounts for the fact that a receiver will experience all possibleconfigurations of the Rayleigh field even if not in motion.
The usual channel response is illustrated by a two-dimensional representation of thetime delay spread of the channel, where multipath results in peaks of various amplitude,present at specific excess delays relative to the original channel excitation impulse, asillustrated in Figure 7.11. Each delayed peak corresponds to a reflected signal.
When the receiver is in motion, additionally, various Doppler shifts appear for each ofthe signals received. The Doppler shift on an individual multipath component dependson the angle of its arrival with respect to the direction of the vehicle displacement. Thecumulative effect of these shifts is called the channel Doppler spread. The procedureinvolved in analysing such spread is to line up a series of successive impulse responsesnapshots, take a slice through them at a given time delay, and then do a Fouriertransform on the resulting samples. As a result, the broadcast channel can be illustratedby a three-dimensional representation of its impulse response.
The effect of the spreading of the received signal in both time and frequency isillustrated as scattering diagrams in Figures 7.12 and 7.13 where the channel impulseresponse is given on a three-dimensional plot of amplitude versus time and frequency.This is a very useful tool for visualising the effects of the surrounding environment on thesignal received by a mobile receiver. Figure 7.12 shows an example of a scatteringdiagram obtained from a measurement run that took place in the downtown area of alarge city. ThemaximumDoppler shift that can occur is a function of the radio frequencyand the vehicle speed. In terms of the normalised frequency scale used here, the maximumshift at 1.5 GHz is –5 Hz/m. This corresponds to a maximum shift of 139 Hz at a typicalhighway speed of 100 km/h.
In an urban area such as the one depicted here, the scattering diagram tends to belimited to small excess delays but is rather complex due to the multitude of echoes. In thiscase, the scattering is from objects close to the receiver, and the scattered signal arrivesfrom many different angles. Particularly in dense urban environments, the arrivals tend
time
pow
er
max.(line-of-sight)
0
Figure 7.11 Simplified 2-dimentional channel impulse response
The Broadcast Side 279
![Page 307: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/307.jpg)
towards a uniform angular distribution, which results in a ‘U’ shaped Doppler spectrum.At larger excess delays in such an environment, the components with small Doppler shift(nearly perpendicular to the direction of travel) tend to disappear. In urban environments,these components are frequently blocked by the buildings along the street. The Dopplerspectrum then divides into two groups, one corresponding to the signal componentsarriving from the direction in which the vehicle is travelling (positive Doppler shift), andthe other from components arriving from behind the vehicle (negative Doppler shift).
Figure 7.13 shows a scattering diagram derived from a measurement in the downtownarea of a small city. The division of the Doppler spectra into two groups near the maximais more evident here. The diagram clearly shows the funnelling of the signal by the streetalong which the vehicle is moving, with many components lined up near the maximumDoppler shift. There is a sizeable component having about 5 ms excess delay that seems tobe caused by a reflection from a building located some 750m (2.5 ms� c) behind thetransmitter and reaching the receiver from behind (negative Doppler shift). These twofigures are each the result of a group of 128 successive channel impulse response snap-shots representing some 5m of travel.
Four different transmission modes were developed to cater for a wide range of speedand frequency requirements in DAB systems as shown schematically in Figure 7.14.Dependent on the frequency used and the maximum vehicle speed envisaged, the appro-priate DAB transmission mode can be chosen.
0
−15
Pow
er D
ensi
ty (
dB)
−30
−10
6.4
Excess Time Delay (us)
0
−5 0
Doppler Shift (cycles/m)
5 10
Figure 7.12 Scattering diagram – downtown/large city
280 Digital Audio Broadcasting
![Page 308: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/308.jpg)
0
−15
Pow
er D
ensi
ty (
dB)
−30
−10
6.4
Excess Time Delay (us)
0
−5Doppler Shift (cycles/m)
5 100
Figure 7.13 Scattering diagram – downtown/small city
30 100 300 1000 3000
f (MHz)
v (km/h)
10,000
3000
1000
300
Mode IIIMode IIMode IVMode I
Figure 7.14 Interdependencies of maximum vehicle speed, frequency and DAB transmission mode
The Broadcast Side 281
![Page 309: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/309.jpg)
A critical situation arises if the vehicle velocity is higher than recommended for thegiven DAB transmission mode and carrier frequency. Figure 7.15 describes in principlethe C/N behaviour of the mobile receiver with velocity. Clearly, a limiting speed can beidentified beyond which reception is no longer possible. Often the value C/Nmin+3 dB istaken for planning of DAB for mobile reception.
7.5.2 Propagation and Channel Models
Propagation models describe the propagation of electromagnetic waves with the aim topredict the field strength level in a certain area. These models take into account propaga-tion losses and shadow fading effects. Propagation models are in general independent ofthe specific transmission system. Channel models take care of the specific properties ofthe transmission system such as certain types of fading, bandwidth, and effects that occurwhen the receiver is in motion.
The probability distribution functions of the received field strength relevant to thereception ofDAB signals were found to correspond to a number of statistical distributionmodels related to the specific environment. These distribution models are generallydifferent for so-called ‘small areas’ and ‘large areas’. The large areas are usually definedas locations extending over many wavelengths (l), usually 200m by 200m, whereas thesize of small areas extend only over few wavelengths. Both terms ‘small area’ and ‘largearea’ will subsequently be used in this section.
7.5.2.1 Propagation Models
Shadow FadingThe variation of the signal power due to reflections, scattering and diffraction of thesignals by obstacles in the near or more distant vicinity of the receiving location is calledshadow fading. It takes place on ‘large areas’ once the signal levels have been averaged toremove the signal variations within the ‘small areas’. Being multiplicative processes these
C/Nmin
vvmax
C/Nmin+3 dB
C/N
Figure 7.15 Impact of Doppler spread due to receiver velocity v on the required C/N of the receiver
282 Digital Audio Broadcasting
![Page 310: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/310.jpg)
damping mechanisms give rise to a log-normal distribution of the received signal fieldstrength. In measurements typical values between 3 dB and 6 dB are found for thestandard deviation of this distribution.
This corresponds to the model adopted in Recommendation ITU-R P.1546 [P.1546]which describes a statistical field strength prediction model. In this recommendation avalue for the standard deviation of 5.5 dB is adapted.
Statistical ModelsRecommendation ITU-R P.1546 describes the log-normal model used by the ITU-R inpredicting ‘large areas’ propagation losses. The model is appropriate for rural areas aswell as for built-up areas, giving close agreement with the well-known Okumura/Hatapropagation model [Okumura, 1968], [Hata, 1980] for the latter environment. Thevalidity of these models is illustrated by Figures 7.16 and 7.17 which compare the resultsof actual field measurements conducted at 1.5 GHz in the Montreal area in Canada withthese propagation models for a given effective isotropic radiated power (e.i.r.p) andheight above average terrain (HAAT). (In Figure 7.16 a comparison with the predecessorof ITU-R P.1546, Recommendation P.370, is made).
Deterministic ModelsAlthough the ITU-R prediction model is widely accepted, it is preferable to augmentit with more precise prediction methods based on topographic databases and landoccupation data [Voyer, 2000], [Voyer, 1996], [Whitteker, 1996], [Grosskopf, 1991],[Grosskopf, 1997]. Since 2007 also a deterministic ITU-R propagation model to beused with topographic data is available [P.1812]. In this way, a DAB system moreprecisely tailored to the given service area can be planned and specific requirements,such as repeaters to cover specific hard to reach areas, can be assessed.
Intersymbol InterferenceIn DAB, a particular multipath situation is encountered if some signal echoes falloutside the range that can be corrected by the DAB receiver. Multipath reflections
30
40
50
60
70
80
90
100
110
120
0 10 20 30 40 50 60 70Distance (km)
Fie
ld s
tren
gth
(d
BµV
/m)
Measured dataCCIR model (original)CCIR model (corrected)Free space loss curve
Figure 7.16 Comparisons of measured data with Rec. ITU-R P.370 model and free-space loss
curve in Montreal for 50% of locations (e.i.r.p.¼ 41.1 dB(W), HAAT¼ 235.5m)
The Broadcast Side 283
![Page 311: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/311.jpg)
which fall beyond the symbol guard interval create inter-symbol interference. Thereception performance will rapidly be impacted by this intra-system interference andreduce the service availability.
In coverage prediction models, normally, destructive components leading to inter-symbol interference are taken into account explicitly, at least for active echoes, i.e., fordirect path signals coming from different transmitters in an SFN, see for example [BPN066]. Alternatively, inter-symbol interference, in particular that arising from reflections,could be accounted for in channel models. However, this is normally not done since amore complex model would need to be used in this case for the performance simulation.
7.5.2.2 Channel Models
Typical properties of a transmissions system which can be taken into account by channelmodels are described in this sub-section.Typically, the various effects taken into account by thechannelmodel result in an increase of theC/N in order to obtain a certain systemperformance.
Effect of Multipath FadingThe variation of the field strength over a ‘small area’ due to the constructive and destructivesuperposition of electromagnetic waves is called fast fading (see also section 2.1). In mostcases one wave is dominant. Such a wave field can be modelled by a Rician distribution(constant vector plus Rayleigh distributed vectors). If there is no dominant wave presentthe field can be modelled by a Rayleigh distribution (only Rayleigh distributed vectors).
Therefore, the total probability density function of the received power should combinelog-normal and Rice or Rayleigh distribution in order to take account of both large-areavariations and small-area variations. When modeling this transmission channel in detail,the distribution of instantaneous values in a small area is obtained by considering a Riceor Rayleigh variable whose mean value is itself a random variable having a log-normaldistribution.
Fie
ld s
tren
gth
(d
BµV
/m)
20
40
60
80
100
140
120
0 10 20 30 40 50 60 70Distance (km)
Measured dataOkumura urban modelOkumura suburban modelOkumura quasi open modelOkumura open model
Figure 7.17 Comparisons of measured data with the different Okumura models in Montreal for50% of locations (e.i.r.p.¼ 41.1 dB(W), HAAT¼ 235.5m)
284 Digital Audio Broadcasting
![Page 312: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/312.jpg)
Figure 7.18 confirms these conclusions anddepicts the variationof aCWsignal receivedbya mobile receiver in an urban area. The relative field strength (normalised to the mean) isshown as a function of the receiver location along the measurement route. It can be seen thatmultipath causes fast and very deep fades, while a rather slow variation of the signal envelopein the large area plot in Figure 7.18 reveals the presence of shadowing due to tall buildings.
Amagnified view of the received signal as a function of location, presented as the smallarea, shows that multipath causes large signal variations resulting from signal cancella-tion between the various scattered signal components. This variation of the resultingsignal field strength usually corresponds to a Rayleigh distribution. The CDF functionsof the measured signal levels are presented on the right side of Figure 7.18. Due to thetime interleaving used by DAB (see section 2.2.5), these small scale fluctuations will notaffect reception in vehicles moving at sufficiently high speed, however, they will be morerelevant at pedestrian speed or when the receiver is not in motion.
As will be seen later in this section, except for a cost of about 4–8 dB of carrier-to-noiseratio for operation of theDAB system in amultipath environment, it can be assumed thatthe performance of the DAB reception will correspond to the averaged field strengthfound over the ‘small area’. This means that, instead of using the combined log-normaland Rice/Rayleigh propagation model, the reception performance for the DAB systemcan be modelled following the simpler ‘large area’ log-normal model.
0
20
40
60
80
100
0
20
40
60
80
100
342338334330–20
20
0
0
–20
20
0
–10
–30
10
30
Location (m) Relative signal variation (dB)
Location (m)
Rel
ativ
e si
gnal
var
iatio
n (d
B)
Large area Large area
Per
cent
age
loca
tions
whe
re r
elat
ive
sign
al le
vel ≤
abs
ciss
aP
erce
ntag
e lo
catio
ns w
here
rel
ativ
esi
gnal
leve
l ≤ a
bsci
ssa
Small area
Small area
100 200 300 400 –20 –10 0 10 20
Relative signal variation (dB)
–20 –10 0 10 20
Figure 7.18 Relative signal variation (dB) with the corresponding cumulative distributionfunction of a CW signal as seen by the mobile unit in a large area and a small area
The Broadcast Side 285
![Page 313: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/313.jpg)
However, the validity of this approach is limited in particular reception situationswhere micro-reflections with excess delays below about the reciprocal of the DABchannel bandwidth occur. These micro-reflections result in so called flat fading overthe channel which can wipe out most of the signal. If the receiver is not moving to takeadvantage of the time interleaving this could result in loss of service.
For coverage predictions, normally, such particular receiving situations are accountedfor by requiring an increased carrier-to-noise ratio in excess of that required for fastfading channels while continuing to apply the log-normal model. This increase of C/N istypically in the order of 3 dB.
Effect of Channel BandwidthThe effect of the transmitted signal bandwidth on the variability of the received signal isillustrated by comparing Figures 7.18 and 7.19. As can be seen from these figures, thelevel of the 1.47 MHz bandwidth DAB signal shown in Figure 7.19 exhibits much lessmultipath fading than the CW signal from Figure 7.18, and the cumulative distributionfunction (CDF) of the wideband signal is closer to the reference log-normal CDF. This isdue to the fact that the power is integrated over the 1.47MHz bandwidth, thus averagingout most of the sharp frequency selective fading occurring in small areas. At the limit,
0
20
40
60
80
100
0
20
40
60
80
100
342338334330–20
20
0
–20
20
0
–10
–30
10
30
Location (m) Relative signal variation (dB)
Large area Large area
Small area
Small area
Rel
ativ
e si
gnal
var
iatio
n (d
B)
Per
cent
age
loca
tions
whe
re r
elat
ive
sign
al le
vel ≤
abs
ciss
aP
erce
ntag
e lo
catio
ns w
here
rel
ativ
esi
gnal
leve
l ≤ a
bsci
ssa
0Location (m)
100 200 300 400
–20 –10 0 10 20
Relative signal variation (dB)–20 –10 0 10 20
Figure 7.19 Relative signal variation (dB) with the corresponding cumulative distribution
function of a 1.47 MHz signal as seen by the mobile unit in a large area and a small area
286 Digital Audio Broadcasting
![Page 314: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/314.jpg)
such averaging has the same effect as the averaging over a small area, therefore eliminat-ing the Rayleigh portion of the combined channel propagation model.
As long as the signal echoes fall within the symbol guard interval, the assumption ofintegrating the power within the channel bandwidth, thus averaging out the sharp frequencyselective fades, is a useful approximation for the channel model, although the underlyingmechanisms (channel coding and interleaving) would have to be considered in detail for aprecise analysis. In fact,DABreception in aRayleigh fading environment suffers an apparentraise of the thresholdC/Nof about 4 -8 dB compared to aGaussian channel but once it is in aRayleigh environment, the specific number and relative level of echoes becomes irrelevant.
This behaviour was verified in field measurements conducted to characterise the sensi-tivity of the received signal variation as a function of channel bandwidth. Figure 7.20shows the increasing multipath fade margin as the channel bandwidth is increased from
10–1 2 5 101 2
1
0
–1
2
3
4
5
6
7
8
9
10
11
12
Mu
ltip
ath
fad
ing
mar
gin
(d
B)
Bandwidth (MHz)
Service availability:99.5 %99.0 %95.0 %90.0 %80.0 %50.0 %
5
Figure 7.20 Improvement in multipath fade margin, dense urban environment
The Broadcast Side 287
![Page 315: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/315.jpg)
100 kHz to 5MHz in a dense urban environment. The fademargin can be interpreted as thepossible saving in transmit power relative to that needed for a 100 kHz channel bandwidthsystem, for an equivalent service availability objective.
Figure 7.20 shows that, for service availability objectives lower than 50%, the improve-ment in fade margin remains in the order of 1.5 dB in a dense urban area. Significantimprovement is observed for service availability objectives of 90% or greater. Each curvecan be divided into two sections, the first part being from 100 kHz to a bandwidth valuethat corresponds to a knee in the curve, the second part being from the knee position tothe 5 MHz bandwidth value.
It seems that the position of the knee on the curves falls between 1 and 2 MHz,confirming the validity of the choice of 1.5 MHz bandwidth for the DAB system. Below1 MHz, the multipath fading increases abruptly while above 2 MHz the improvement infade margin is generally not very significant. This also means that most of the ‘small area’Rayleigh fading is removed when a channel bandwidth of more than about 1 MHz is usedin combination with the DAB modulation.
7.6 Coverage Planning
The coverage planning of a DAB service comprises a number of aspects. Firstly, it has tobe decided which kind of service reception is intended. The choice could be, e.g., mobilereception or portable reception for handheld or standard receivers. Then the serviceavailability has to be specified. Planning criteria have to be identified relating to thereceiver characteristics, like carrier-to-noise ratio, receiver noise figure, antenna gainand, in particular, minimum required field strengths. Then, propagation issues have to bespecified and interference from inside and outside the planned DAB network has to betaken into account. Finally, the particular aspects of the operation of a single frequencynetwork have to be considered, like time delays between transmitters or wanted signalsummation in order to account for network gain.
7.6.1 Reception Modes
Traditionally, coverage of analogue broadcast systems has been planned on theassumption that reception would make use of fixed antennas at roof height, nominally10m above ground level (AGL). For DAB it is clear that this assumption would not bevalid.
DAB is mainly used in a mobile and/or portable reception environment where thereceiving antenna is either integrated in the receiver or is located near the receiver. In bothcases the reception is assumed to be at a height of 1.5m AGL.
In [Tech 3317], [BMCO, 2007] four reception classes have been defined to describetypical receiving scenarios for DAB and DMB. They are given in Table 7.3.
For the frequency plans GE06 and MA02, which are introduced in more detail insection 7.8.2, class B has been used to describe portable reception and class C has beenused to describe mobile reception.
288 Digital Audio Broadcasting
![Page 316: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/316.jpg)
7.6.2 Planning Criteria
Coverage planning for broadcasting systems has to be based on certain planning criteriawhich comprise receiver characteristics, propagation aspects and coverage quality con-siderations. A central role in coverage planning plays the minimum required fieldstrength for reception. This chapter gives an overview of these planning criteria anddescribes which figures are used in coverage planning and which have been used when thefrequency plans GE06 and MA02 have been established. A comprehensive treatment ofplanning criteria for DAB/DMB in the VHF and L-Band can be found in [BPN 003],[Tech 3317], [RRC06, 2006], [CEPT, 2007b].
Table 7.3 Reception classes for DAB and DMB
Reception
mode
Class Description
Portable
reception
Class A – hand-held portable outdoor reception– with external (for example telescopic or wired headsets) or
integrated antenna– at no less than 1.5m above ground level, at very low speedor at rest
Class B – hand-held portable indoor reception– with external (for example telescopic or wired headsets)
or integrated antenna– at no less than 1.5m above ground level, at very low speedor at rest
– on the ground floor in a room with a window in an externalwall (*)
Mobilereception
Class C – hand-held reception inside a moving vehicle (car, bus etc.)– with the receiver connected to the external antenna of thevehicle
– at no less than 1.5m above ground level, at higher speed
Class D – hand-held reception inside a moving vehicle (e.g. car, bus,etc.)
– without connection of the receiver to the external antenna ofthe vehicle
– with external (for example telescopic or wired headsets) orintegrated antenna
– at no less than 1.5m above ground level, at higher speed
(*) in [BMCO, 2007] it is additionally distinguished between a ‘light indoor’ (B1) and a ‘deep
indoor’ (B2) mode
The Broadcast Side 289
![Page 317: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/317.jpg)
7.6.2.1 Receiver Characteristics (Noise Figure, Carrier-to-Noise Ratio, Antenna Gain)
The technical aspects of receiver characteristics are dealt with in Chapter 8. Here, onlythe values for the receiver noise figure, the required carrier-to-noise ratio and the antennagain are given and it is explained how they are used for coverage planning. As a guidelinethe EBU paper [Tech 3317] is referred to.
For the receiver noise figure a value of 7 dB is assumed for both VHF and L-Band.For the required carrier-to-noise ratio C/N a value of 15 dB is used for DAB in theGe06 planning and the same value has been used for the MA02 planning in the L-Band. The EBU paper [Tech 3317] proposes a value of 13.5 dB for DMB for bothmobile and portable reception. However, it is pointed out in this chapter thatportable reception is more demanding since time-interleaving is not thus effectivewhich could lead under adverse conditions to C/N values of up to 16.5 dB, see alsosection 7.5.2.
A further criterion to be taken account of in coverage planning is the antenna gain ofthe receiving device. A distinction has to be made with regard to the kind of antennaunder consideration. The antenna of the receiver can be integrated – which will often bethe case for handhelds, it can be an external antenna or the antenna can be adapted as itis, for example, assumed for mobile reception in a car. Table 7.4 summarises the antennagain values from [Tech 3317]. In the planning for GE06 and MA02 the figures foradapted antennas have been used.
7.6.2.2 Height Loss
Portable and mobile DAB reception takes place at a lower height than roof-levelwhich has been the planning standard for analogue broadcasting. For coverageplanning purposes a nominal height of 1.5m AGL is assumed. Therefore, for thosefield strength prediction methods which calculate the field strength at roof-level, acorrection called height loss has to be applied. This height loss varies with theenvironment and the frequency. The values proposed in the EBU paper [Tech 3317]are given in Table 7.5. For the GE06 planning a value of 12 dB (for the VHF band)has been used [RRC06, 2006] assuming a rural/suburban environment as representa-tive. In MA02 10 dB (for the L-Band) has been used for the height loss. In the EBUplanning paper more conservative values are proposed for the L-Band as can be seenfrom Table 7.5.
Table 7.4 Antenna gain for the different antenna configurations and reception classes
Band III L-Band Classes
Integrated antenna �17 dBd �4 dBd A, B, DExternal antenna)(*) �13 dBd �1 dBd A, B, DAdapted antenna �2.2 dBd 0 dBd C
(*) Telescopic or wired headsets
290 Digital Audio Broadcasting
![Page 318: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/318.jpg)
7.6.2.3 Building Penetration Loss
In the case of indoor reception (reception class B) the DAB signal suffers from apenetration loss when entering into the building. Field strength measurements wereperformed to derive typical figures for the building penetration losses in the frequencybands relevant to DAB.
Around 230 MHz, building penetration loss was measured in the UK [Green, 1992]and Germany [Schramm, 1996]. The UK results show that the building penetration lossvaries between 2 dB and 18 dB on the ground floor of domestic buildings. Measurementson the first floor gave about 6 dB more field strength. The average loss was found to be8 dB –1.2 dB. The German results basically support these figures. The penetration lossmeasured ranged from 3 dB to 20 dB and the median value for typical buildings wasfound to be 9 dB at 220MHz and 8.5 dB at 223MHz with a standard deviation of 3.5 dB.
As a figure for network planning amean value of 9 dB and a standard deviation of 3 dBis given in the EBU paper [Tech 3317] and has also been used for the GE06 plan [RRC06,2006]. However, a general observation is that the building penetration loss dependsstrongly on the kind of buildings and their environment. For example, recent measure-ments [Mason, 2004] in London gave values between 9 dB and 16.4 dB for the mean valueand 3 dB to 5.5 dB for the standard deviation. The large variety of values is the reasonwhy different figures for planning can be found in the literature.
At 1.5 GHz, measurements in Australia have shown that the average building penetra-tion loss for DAB in domestic dwellings averages 6.7 dB (ranging from 6.1 dB to 9.4 dB,depending on construction materials used) and is approximately 18.6 dB in reinforcedconcrete commercial buildings [DSB, 2002]. Measurements in a 1.5 GHz SFN wereperformed in the DAB pilot project at Dresden, Germany [Michler, 1998]. The fieldstrengths in rooms at different floors of seven different buildings were measured. Thebuildings were all located in a zone where two or three transmitters contributed toreception. In most buildings the level difference between outdoor and indoor measure-ments was found to be 0 dB to 5 dB at upper floors and 8 dB to 15 dB at the ground floor.In a modern office building (a concrete-steel construction with metal coated windows),however, the corresponding values were 20 and 30 dB, respectively.
As a figure for planning in [Tech 3317] a mean value of 11 dB and a standard deviationof 6 dB is taken for the L-Band, whereas in [BMCO, 2007] 13 dB and 4.5 dB can be found.
In order to cope in network planning with the large variation of the penetration lossfigures, in [BMCO, 2007] a second indoor reception mode, called ‘deep indoor’, isproposed. For this reception mode the mean value of the building penetration loss isincreased by 6 dB and the standard deviation by 1 dB with respect to the figures of thestandard ‘light indoor’ reception mode as described above.
Table 7.5 Receiving antenna height loss
Environment Band III L-Band
Urban 19 dB 27 dBSuburban 12 dB 21 dB
Rural 12 dB 19 dB
The Broadcast Side 291
![Page 319: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/319.jpg)
For reception class D (handheld reception inside a vehicle) penetration loss figures areneeded, too. Up to now, no measured values are available. In the EBU paper [Tech 3317]values of 8 dB and 2 dB are assumed for the mean value and the standard deviation,respectively. In [BMCO, 2007] respective values of 7 dB and 0 dB are proposed. In bothcases VHF and L-Band values are identical.
7.6.2.4 Reception Quality
In section 7.5.2 the statistical aspects of signal propagation and field strength distributionhave been discussed. For coverage planning, a choice has to be taken for the minimumlocation probability needed in order to regard a location as covered. In [Tech 3317],[BMCO, 2007] the classification described in Table 7.6 is given. For GE06 and MA02 aminimum location probability of 95% for portable reception and 99% for mobilereception has been assumed.
As a consequence, minimum required field strengths for coverage planning have to beincreased by a certain amount, the so-called location correction factor, in order to ensurethe higher coverage probability. This correction factor is necessary since in coverageplanning field strengths are always expressed in terms of their mean values. The locationcorrection factor is a function of the intended coverage probability and the standarddeviation of the field strength distribution. In Table 7.6 the last row gives the correspond-ing location correction factors for a field strength standard deviation of 5.5 dB. A moredetailed treatment of this aspect can be found in [BPN 066].
7.6.2.5 Man-made Noise
Man-made noise has to be taken into account when the minimum required field strengthfor a service is to be determined.Man-made noise is measured relatively to thermal noise.Recent measurements in Band III have shown relatively high values of up to 8 dBwhereas in L-Band values 0 dB can be assumed. The full man-made noise thevalue, however, are only valid for receiving antennas with a gain greater than 0 dBi
Table 7.6 Coverage quality (probability in %) and location correction factor
Reception Class Coverage quality Location correction factor
Band III L-Band
A Acceptable (> 70%) 3.0 dB 3.0 dBGood (> 95%) 9.0 dB 9.0 dB
B Acceptable (> 70%) 3.0 dB 4.0 dBGood (> 95%) 10.0 dB 13.0 dB
C Acceptable (> 90%) 7.0 dB 7.0 dB
Good (> 99%) 13.0 dB 13.0 dB
D Acceptable (> 90%) 7.6 dB 7.6 dBGood (> 99%) 13.7 dB 13.7 dB
292 Digital Audio Broadcasting
![Page 320: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/320.jpg)
(-2.2 dBd). For antennas with a gain less than 0 dBi it is important to distinguish betweenthe pure antenna gain and the efficiency of the antenna. As a consequence, in thecalculation for the minimum required field strength only an effective allowance forman-made noise is be taken into account, which only in the case of adapted antennasamounts to the full value of the man-made noise itself. Table 7.7 summarises theallowance for man-made noise in urban areas as given in [Tech 3317] where also moredetails regarding the treatment of man-made noise can be found.
7.6.2.6 Minimum Field Strength
Minimum required field strengths for reception can be deduced from the above discussedplanning criteria for the different frequency bands and reception scenarios.Traditionally, in frequency planning minimum field strengths are expressed in terms ofminimum median equivalent field strengths required at 10m AGL for 50% of the timeand 50% of locations. Table 7.8 gives the required minimum field strength values whichhave been used for the frequency plans MA02 and GE06.
In the EBU paper [Tech 3317] more conservative minimum field strength values arerecommended for DMB network planning. They are given in Table 7.9. The figures forFmin in Table 7.9 refer to a receiving antenna height of 1.5m AGL.
7.6.3 Interference Considerations
The previous section described the approach taken to predict coverage on the basis ofsignal strength from nearby transmitters in a network. Strictly speaking, this applies
Table 7.7 Allowance for man-made noise depending on the antennatype in urban areas
Band III L-Band Classes
Integrated antenna 0 dB 0 dB A, B, D
External antenna)(*) 1 dB 0 dB A, B, DAdapted antenna 8 dB 0 dB C
(*) Telescopic or wired headsets
Table 7.8 Minimum field strengths Fmin used in GE06 and MA02 for T-DAB planning at 10mAGL for 50% of time and 50% of locations
Band III (GE06) L-Band (MA02)
Reception mode mobile, (RPC 4)
(=class C)
portable indoor, (RPC 5)
(=class B)
mobile,
(= class C)Location probability 99 % 95 % 99 %C/N 15 dB 15 dB 15 dB
Effective standard deviation 5.5 dB 6.3 dB 5.5 dBMinimum field strength Fmin 60 dB(mV/m) 66 dB(mV/m) 69 dB(mV/m)
The Broadcast Side 293
![Page 321: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/321.jpg)
only in the situation where noise is the factor limiting reception. In practice, inter-ference from other networks, or distant transmitters within the same network, may beequally or more important, and it is necessary to plan services for adequate protectionagainst such interference. The interfering field strength from distant transmitters canvary significantly according to the type of terrain that lies between the interferingtransmitter and the receiver, the land occupation as well as the diurnal variation andclimatic conditions. Because of these variations, interfering field strengths are oftenpredicted using terrain-based models. Interference from a number of distant trans-mitters may need to be taken into account, and this is normally built into coverageplanning software.
Although terrain-based modelling is favoured for network planning, it is not alwayssuitable, for example if detailed terrain data are not available, as may occur if significantinterferers are located in neighbouring countries or overseas. Under these circumstances,other methods, such as the one described in Recommendation ITU-Rec P. 1546 [P.1546],are used. Also for the purpose of establishing a frequency plan, where a very largenumber of field strength predictions are needed, a statistical approach as given in Rec.P.1546 is advantageous. Again taking the rapid failure characteristic of DAB intoaccount, the criterion for coverage is that the wanted signal strength should be protectedagainst interference for 99% of the time and locations in Europe (for, e.g., for the case ofmobile reception). Put another way, given an interfering field strength predicted to bepresent for 1% of the time and locations, the wanted signal strength must exceed the levelof the interferer by a sufficient margin to allow successful reception. The required signal-to-interference ratio to avoid noticeable channel errors as measured in the laboratory iscalled the protection ratio and is used to establish the maximum level of allowableinterference.
In the GE06 plan for DAB in Band III an intra-service protection ratio, i.e. forinterference of a DAB service into another DAB service, of 15 dB has been assumed,whereas in MA02 for DAB in the L-Band an intra-service protection ratio of 10 dB was
Table 7.9 Minimum field strengths Fmin for T-DMB network planning for different reception classes at 1.5m
AGL for 50% of time and 50% of locations (from [Tech 3317])
Receptionclass
A B C D
Reception
mode
portable outdoor portable indoor mobile, adapted
antenna
mobile, integrated
antenna
Location
probability
99 % 95 % 99 % 99 %
C/N 13.5 dB 13.5 dB 13.5 dB 13.5 dB
Band III L-Band Band III L-Band Band III L-Band Band III L-Band
Effective
standard
deviation
5.5 dB 5.5 dB 6.3 dB 8.1 dB 5.5 dB 5.5 dB 5.9 dB 5.9 dB
Minimum
field
strength
Fmin
55.6
dB(mV/m)
60.1
dB(mV/m)
65.9
dB(mV/m)
75.3
dB(mV/m)
49.5
dB(mV/m)
59.8
dB(mV/m)
68.2
dB(mV/m)
72.7
dB(mV/m)
294 Digital Audio Broadcasting
![Page 322: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/322.jpg)
chosen. The EBU paper [Tech 3317] proposes a protection ratio of 13.5 dB for DMBinterfered with by DMB.
Adjacent channel protection ratios as well as inter-service protection ratios of DAB/DMB with regard to other broadcasting and relevant non-broadcasting services can befound in [RRC06, 2006], [CEPT, 2007b], [Tech 3317].
As was already discussed in section 7.6.2, in order to provide for the higher locationavailability needed for DAB, a location correction factor has to be taken into accountwhen the system protection ratios mentioned above are applied. This correction factordiffers by a factor of ‘
ffiffiffi2p
’ from that mentioned in 7.6.2 since now the statistical variationof both the wanted as well as the unwanted signal has to be taken into account. Moredetails can be found in [BPN 066].
7.6.4 Delay Considerations
As already mentioned in the introduction to this chapter, coverage planning in a DABsingle frequency network means, to a large extent, delay planning. All transmitters in aDAB network must be time and frequency synchronised for proper operation of theSFN. It is common practice to use GPS receivers to provide a highly stable frequency andtime reference at different points in the network, typically the ensemble multiplexer andtransmitter sites. The transmitter output frequency is locked to the 10 MHz signal of theGPS receiver and the GPS 1 pps signal serves as a reference for the delay compensation ateach transmitter.
Time synchronisation is performed by introducing an artificial delay in the distributionnetwork of the SFN or at the different transmitter sites as shown in Figure 7.22. The totalduration for which the signal must be delayed is the sum of four different types of delay[EN 300799]:
1. Network compensation delay: The time by which the ETI (Ensemble TransportInterface) output signal of the multiplexer is delayed on its way through thedistribution network to the transmitter site is called the network path delay. Toensure that the overall delay to each of the transmitter sites is constant and ofknown value, a network compensation delay is added for each path through thedistribution network. The largest network path delay to a certain transmitter sitedetermines the network compensation delays necessary for all the other networkpaths. In a correctly adjusted SFN, the sum of network compensation and networkpath delay must be the same for each network path.
2. Transmitter compensation delay: The time the signal is delayed in the equipment at thetransmitter site through channel encoding (e.g. COFDM modulation) and RF mod-ulation is called the transmitter processing delay. This also includes delay due to signalconditioning and RF processing in the amplifier and associated filtering. The proces-sing delay of the equipment differs from manufacturer to manufacturer. To ensurethat the overall delay between transmitter input and antenna output at each trans-mitter site is constant and of known value, a transmitter compensation delay is addedindividually for each transmitter in the network. The transmitter with the longestprocessing delay determines the transmitter compensation delay for all the other
The Broadcast Side 295
![Page 323: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/323.jpg)
transmitters in the network. In a correctly adjusted SFN, the sum of transmittercompensation and transmitter processing delay must be the same for each transmitterin the network.
3. Transmitter offset delay: This delay can be set for each transmitter site individuallyand is necessary for network planning aspects to achieve optimised coverage in anSFN. Owing to the surrounding topography and differing effective output power, thecoverage areas differ from transmitter to transmitter. The transmitter offset delayensures that the signals from individual transmitters arrive approximately at the sametime in the overlap zone of their coverage areas. The transmitter offset delay can be setindividually for each transmitter from the ensemble multiplexer using the MNSC(Multiplex Network Signalling Channel) in the ETI stream.An example of such a network is given in Figure 7.21. It shows the 38-transmitter
DAB network in Bavaria, where most of the transmitters have individually set
Figure 7.21 DAB SFN in Bavaria operated by BDR with transmitter powers (W) and offsetdelays (ms) (Reproduced by permission of � BDR)
296 Digital Audio Broadcasting
![Page 324: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/324.jpg)
transmitter offset delays in order to optimise the coverage. This measure is necessarysince the transmitter characteristics with regard to distance from the next transmitter,antenna height or transmitter power are very heterogeneous.
4. Network padding delay: This delay is used by the network operator or the broadcasterto adjust the overall delay of the network. It allows equalisation of the overall delayof the DAB network with that of other networks such as FM or DTV. It can also beused to synchronise different DAB networks to allow radiation of co-timed
τNPEnsembleMultiplexer
τNC1 τTO1τTC1Transmitter 1
τNC2 τTO2τTC2Transmitter 2
τNCm τTOmτTCmTransmitter m
TransportNetwork
Network paddingdelay
Network path delay
Network compensationdelay
Transmitterdelay
Transmittercompensation delay
Transmitteroffset delay
Delay identical foreach network path
Delay identical for eachTransmitter site
τNP = Network padding delayτNCx = Network compensation delay for network path xτTCx = Transmitter compensation delay for transmitter xτTOx =Transmitter offset delay for transmitter site x
With :
Figure 7.22 Types of delay in an SFN
The Broadcast Side 297
![Page 325: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/325.jpg)
synchronising symbols for speedier locking of DAB receivers in the case of tuning toa different frequency.
In summary, network and transmitter compensation delays ensure that the DABsignal is theoretically transmitted at the same point in time from each transmittersite in the network, whereas the transmitter offset delay takes care of the topologyof the SFN. The padding delay is only relevant with respect to other broadcastingnetworks. The different types of delay and how they interrelate are given inFigure 7.22.
In modern distribution networks, the network path delay may change as a result of thenecessity to reroute the signal from time to time. To automatically manage this varyingnetwork path delay, dynamic delay compensation on the basis of time-stamps is used inDAB which allows synchronisation of the delivery of ETI frames at all transmitter sites.This requires a common time reference (e.g. GPS) at the ensemble multiplexer and alltransmitter sites in the network. The time-stamp defines the instant of time at which theframe should be delivered to the channel encoder. The time-stamp can be carried in allvariants of the ETI signal.
7.6.5 Coverage Prediction
When planning a broadcast network, the prediction of the expected coverage is anelementary part. Propagation prediction methods and coverage criteria applied in thiscontext have been discussed earlier in sections 7.5 and 7.6.2. This section deals with theevaluation of the coverage prediction.
In networking planning, a location is regarded as covered if the coverage predictionfor this location exceeds the minimum coverage probability that has been chosen as acoverage target – see section 7.6.2.4. For an analogue broadcast system this assessmentis uniquely determined by the comparison of the wanted field strength with the noiseand interference environment at the location under consideration. For an OFDMsystem like DAB this is no longer valid since at the receiving location the wantedsignals from the various transmitters of the DAB SFN add up to an effective wantedsignal power whose statistical properties depend on the particular composition of thesignal situation and which vary from location to location. For the evaluation of thecoverage probability, therefore, more elaborate statistical methods for signal summa-tion have to be applied.
Mathematically, the task consists in the summation and combination of log-normallydistributed statistical variables. Since no analytical solutions exist for this task approxima-tions have been developed most of which fall into the class of ‘log-normal method’ (LNM)approximations and which are widely used. An alternative approach to log-normal summa-tion is the application of Monte-Carlo methods. However, because of their high numericaldemand these latter methods are still restricted to the treatment of selected problems.
As a consequence, the minimum field strength criterion is no longer sufficient for theassessment of broadcast coverage; however, it still gives a rough estimate what coveragecan be expected. A comprehensive treatment of signal summation and network gain isgiven in [BPN 003], [BPN 066].
298 Digital Audio Broadcasting
![Page 326: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/326.jpg)
As a standard, in coverage planning for DAB networks deterministic field strengthprediction methods are employed. These methods use topographic and morphographicterrain data and allow for a more detailed field strength prediction than is possible with astatistical method like ITU-R P.1546. Various approaches for deterministic field strengthprediction methods exist in the broadcasting field, an overview is given, e.g., in[Grosskopf, 1987], [Grosskopf, 1988]. An internationally agreed method has been estab-lished by ITU-R with Rec. P.1812 [P.1812] which is in force since end of 2007.
7.6.6 Further Planning Considerations
When planning networks in detail, the planner is subject to a number of con-straints. These include the frequency range to be used, the receiving environmentto be served, the availability of transmitter sites, and the allowable radiated powerfrom these sites.
The frequency range will determine which of the possible DAB transmission modes ismost appropriate (see also Figure 7.14).
The type of receiving environment has to be chosen, such as mobile, portable orindoor for example. As described in the preceding section the planning criteriaregarding service quality, coverage quality and minimum field strength have to beadapted accordingly.
The availability of transmission sites, and the allowable transmitted power, will have astrong influence on the design of the network and the distance between transmitters. As arule of thumb it is usual to ensure that the spacing between adjacent transmitters is nomore than the distance determined by the guard interval of the chosen mode, as set out inTable 7.10. However, in many circumstances a smaller spacing between transmitters isfound to be necessary.
A frequency plan entry which is the basis of the implementation of the network mayturn out not to perfectly fit with the intended coverage of the service. Bilateral coordina-tion with neighbours may therefore become necessary together with amodification of theplan entry. This aspect is described in more detail in section 7.8.
For an efficient broadcast network planning, several powerful software packagesare available from commercial companies which integrate the various aspectsof coverage prediction, see for example [www.lstelcom.de], [www.irt.de], [www.atdi.com].
More information on implementation aspects can be found in [BPN 066].
Table 7.10 DAB modes and approximate maximum transmitter spacing
DABMode
Guard interval(ms)
Approximate Maximum Transmitter Spacing(km)
I 246 74II 62 18III 31 9
IV 123 37
The Broadcast Side 299
![Page 327: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/327.jpg)
7.6.7 Example of an SFN in Band III
In the United Kingdom, the BBC’s DAB network is an example of an SFN providinglarge-area coverage, and is illustrated in Figure 7.23. The network operates in Band III(Block 12B), and by 2006 it comprised 66 transmitters, with radiated powers between1 kW and 10 kW. This provided coverage to more than 85% of the UK population,
Figure 7.23 DAB SFN in UK (Block 12B) (Reproduced by permission of � Arquiva)
300 Digital Audio Broadcasting
![Page 328: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/328.jpg)
and the network has since been enhanced with additional transmitters. In addition toachieving a high population coverage, the network was also designed to cover the majorroad routes between centres of population. Many major cities are served by more thanone transmitter, so that the coverage would benefit from network gain. The majority ofthe transmitters are co-timed, but for a number of them the signals are time-delayed inorder to avoid self-interference thus optimising the coverage.
7.6.8 Example of an SFN in L-Band
In 1996 in Ottawa, an L-Band DAB network operating in Mode II with one maintransmitter, one coverage extender and two gap fillers has been designed to serve theNational Capital Region [Paiement, 1996], [Paiement, 1997], [Voyer, 1996]. This is anarea of approximately 30 km in radius, comprising Ottawa and several smaller adjacentmunicipalities with a total population of close to one million people.
It was required to provide 90% service availability to the city core, the suburbs,portions of the main roads and highways surrounding the region. This objective isrepresented by a service polygon drawn as shaded contour over a simplified road mapof the area (see Figure 7.24, covering an area of 92 km by 64 km). The predicted coverageachieved by themain transmitter is given in Figure 7.24 (availability at 90%of locations).It can be seen that there is a need for a second transmitter in the network to cover thesouth-west area of the specified service polygon.
Largest areauncovered
Servicepolygon
Coveragecontour
Source: CRC
Figure 7.24 Service polygon for the Ottawa region and coverage of the main transmitter
The Broadcast Side 301
![Page 329: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/329.jpg)
Coveragecontour
Servicepolygon
Coverage gapsin the west
Coverage gaps inthe centre and east
Source: CRC
Figure 7.25 Coverage of main transmitter plus coverage extender
Servicepolygon
Source: CRC
Remainingservice gaps
Coveragecontour
Figure 7.26 Coverage of main transmitter, coverage extender plus two gap fillers
302 Digital Audio Broadcasting
![Page 330: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/330.jpg)
The network planners then decided to use a coverage extender to enlarge the coveragearea. The coverage predicted for the main transmitter plus coverage extender is given inFigure 7.25.
To close the coverage gaps in the west and east-centre of the required service area,two additional gap fillers were put into place. The complete predicted coverage of theOttawa system is shown in Figure 7.26. The contour lines show four remaining smallholes in the requested coverage area where three of them are not in densely populatedareas.
The transmitter parameters are summarised in Table 7.11. It can be seen that the totalservice area of about 30 km in radius can be covered by four transmitter locations with atotal amplifier output power of less than 200 W.
7.7 Coverage Evaluation and Monitoring of SFNs
7.7.1 Parameters for DAB Coverage Evaluation
In order to evaluate the actual coverage in a DAB network, field measurements have tobe taken. In an MFN for FM, field strength is the main parameter for evaluating thequality of the coverage. For DAB, however, more parameters are necessary to evaluatethe quality of the SFN coverage. The following sections describe the main parametersand what they indicate:
1. Field strength: This parameter indicates whether there is signal coverage at all in thisarea of the SFN. However, sufficient field strength does not necessarily mean thatproper reception of the DAB signal is possible. This signal level could be made out ofcontributions from several transmitters which are not properly synchronised in timeand/or frequency.
2. TII: Analysis of the TII with a measurement system delivers the identity of thereceived transmitters, i.e. their pattern and comb numbers and the relative signalstrength as shown in Figure 7.27. The corresponding FIG 0/22 gives additionalinformation about transmitter location and time offset.
Table 7.11 Transmitter parameters of the Ottawa DAB system
Main Transmitter Coverage
Extender
Gap Filler – West Gap Filler –
East-centre
ERP 1000 W 500 W 1000 W 1200 W
Amplifier power 100 W 50 W 30 W 12 WAntenna gain 13 dBi 13 dBi 19 dBi 22.5 dBiAntenna pattern Omnidirectional Omnidirectional Directional, 90�
beamwidth
Directional, 40�beamwidth
Antenna height 105 m 105 m 50 m 50 mDistance from
main transmitter
N/A 5.4 km 7.1 km 10.7 km
The Broadcast Side 303
![Page 331: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/331.jpg)
3. Channel impulse response: The channel impulse response shows in the time domain thedifferent signal contributions which arrive at the receiver (see Figure 7.28). Evaluationof the channel impulse response shows whether the guard interval is violated or not.This parameter is therefore an indicator of the quality of the time synchronisation ofthe network. The channel impulse response together with the TII allows the identifi-cation of contributions from each transmitter. It must be noted that possible con-tributions from signal reflections due to the geographical topography must be takeninto account in the evaluation process.
4. Transmit frequency: All transmitters in an SFN must operate exactly on the samefrequency. To achieve a performance degradation of less than 1 dB, the minimumrequired accuracy of the output frequency is 10% of the sub-carrier spacing, thatis 100 Hz in Mode I, 200 Hz in Mode IV, 400 Hz in Mode II and 800 Hz in Mode III
Bavarian DAB network, motorway A8 close to Allershausen
RelativeScale
Transmitter 1: PfaffenhofenPattern: 1Comb: 4
Transmitter 2: IsmaningPattern: 2Comb: 7
Transmitter 3: Broadcasting House MunichPattern: 2Comb: 6
Delay time [μs]0 50 100 150 200 250 300 350 400 450 500
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
Figure 7.28 Typical plot of a channel impulse response
ENSEMBLE00004258
LABELDAB Bayern
FREQUENCY223936 kHz
123
49% 30%21%
122
476
PATTERNTRANSMITTER COMB
TII-Information
Figure 7.27 Typical analysis of TII information
304 Digital Audio Broadcasting
![Page 332: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/332.jpg)
[TR 101496]. This parameter can be measured at the output of each transmitter inthe SFN.
5. Bit error ratio (BER): The BER is an indicator of the quality of the network. HighBERs can be caused by not enough field strength or synchronisation errors intime and/or frequency. For good audio quality the BER should be 10–4 or better.The different types of BER are discussed in section 7.7.2. To indicate the quality ofthe received signal, CRC error measurements were discussed as alternatives toBER measurement at the early stages of DAB development. The DAB audio signalcontains CRCs for the audio header and the scale factor which could be used.However, it turned out that these CRC errors are not sensitive enough since theyonly occur once the audio signal degrades audibly.
Coverage evaluation of a DAB network can be done by measuring and evaluating theabove parameters. If the coverage is below the required level (e.g. a certain BER fortypically 99%of the time at 99%of the area) careful analysis of this set of parameters andtheir interdependencies allows the planner to derive the measures necessary to improvethe coverage quality.
All the parameters described so far represent well-measurable effects that do not varymuch with time. However, to complete the coverage evaluation, investigation of long-distance interference must also be made. This type of interference depends heavily onpropagation conditions and is only measurable for a small percentage of time. Theseeffects are therefore usually modelled statistically in advance and taken care of in theplanning phase of the network.
7.7.2 A Closer Look at Bit Error Ratio Measurements
There are two different types of BER in a DAB system. Depending on the application,the channel BER or the net BER can be used as a measure for the quality of thecoverage. In comparison, the net BER is the exact method for BER measurementwhereas the channel BER stands for the pragmatic approach. The BER is defined asthe ratio of number of errored bits received to total number of bits received, incontrast to the ‘bit error rate’, which is defined as the number of incorrect bits in acertain time interval.
7.7.2.1 Channel BER
The channel BER can be calculated by comparing the re-encoded bit sequence in thereceiver to the actual bit sequence received. To measure the exact channel BER, thecomplete bit stream would have to be re-encoded in the receiver. An alternative to thisconcept is to re-encode only part of the received signal, that is only the first bit of the 4-bitmother code is re-encoded. Most receiver decoder chips contain this feature and generatea ‘pseudo-channel BER’. Figure 7.29 gives the block diagram for the channel BERcalculation using an MSC sub-channel as the reference bit stream. An alternative tothe MSC BER is the FIC BER which uses the non-time-interleaved FIC data stream asthe reference bit stream.
The Broadcast Side 305
![Page 333: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/333.jpg)
The shortcomings of this method can be clearly seen in Figure 7.29. The calculation ofthe (pseudo-)channel BER is only correct if the channel decoder is able to correct alltransmission errors, i.e. it produces an ideal reference bit stream at the output. This istrue for low bit errors and channel bit error measurement give good indications for BERin the order of 10–4 and lower. The advantage of this method lies in its simple imple-mentation [Schramm, 1997].
7.7.2.2 Net BER
The net BER is calculated by comparing the received and decoded bit stream directly tothe reference bit stream. In this case, the DAB transmission system is treated as a blackbox and a comparison of the output and the input signals of this black box gives the netBER (Figure 7.30).
To calculate the net BER, the reference signal must be known. For on-line measure-ments, a known test sequence must be transmitted, be it in a small subchannel or in thePAD which takes up some of the capacity of the multiplex.
An advantage of the net BER measurement is that the result is always correctirrespective of the quality of the transmission [Frieling, 1996]. The net BER is interestingfor service providers who are only interested in the quality of their service and treat theDAB system simply as another distribution channel for that service.
TransmitterMobile
channel
First bit of the receivedmothercode
Decoded bits ofone subchannel
Receiver
Extraction offirst bit of themothercode
Minimalchannelencoder
Channeldecoder
Time de-interleaver
Comparison BER
First bit of the re-encodedmothercode
Figure 7.29 Generation of the pseudo-channel BER using a MSC sub-channel
306 Digital Audio Broadcasting
![Page 334: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/334.jpg)
7.7.3 Timing Adjustment of SFNs
The only way to check for correct time synchronisation in an SFN is to evaluate thechannel impulse response together with the TII. If the timing within the SFN is notcorrect, the delay times for certain transmitters must be adjusted. This can be donecentrally in a DAB network from the ensemble multiplexer site. The ETI output signalof the multiplexer allows each transmitter site to be addressed and the delays of eachtransmitter to be set individually. This convenient feature avoids the time- and labour-consuming alternative of having to send people directly to the different transmitter sitesto perform the necessary adjustments.
7.7.4 Monitoring of SFNs
Four parameters determine the quality of an SFN andmust be constantly monitored: thecorrect transmit signal according to [EN 300401], level of field strength, accuracy oftransmit frequency and accuracy of timing between the different transmitters.
The correct transmit signal and the accuracy of transmit frequency can bemonitored ateach transmitter site using a reference receiver and a frequency counter. Monitoring thelevel of field strength must be done at two locations: firstly, at the transmitter site bymonitoring the output power of the transmitter and, secondly, in the field by constantlymeasuring the field strength and comparing it to the required values. If all is correct atthe different transmitter sites, an alarm by a field strength measurement probe in thefield would be triggered only by a change in propagation conditions. The timing of theSFN can only be monitored through units that measure the channel impulse response inthe field. Changes of the channel impulse response can be caused by wrongly timedtransmitters or a change in propagation conditions.
7.8 Frequency Management
7.8.1 General Aspects
In order to introduce a broadcasting system, international agreement on frequencybands and a channel raster for this system is necessary. All DAB transmissions have acentre frequency on a nominal 16 kHz lattice, and two frequency bands are, in effect,
DAB system
Referencedata
source
Transmitter Receiver
Original reference data
Comparison BER
Decoded reference dataMobile
channel
Figure 7.30 Generation of the net BER
The Broadcast Side 307
![Page 335: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/335.jpg)
standardised for DAB, though their availability varies from country to country. Theseare Band III (174–240 MHz) and L-Band (1452–1492 MHz). Within these bands,individual centre frequencies for DAB transmissions are specified, which simplifiesmanagement of the spectrum as well as receiver design. The spectrum occupied by anensemble centered on a particular frequency is referred to as a ‘block’. A full list of blocksand corresponding centre frequencies is given in Appendix 3 and [EN 50248].
In Band III, DAB frequencies are specified to accommodate four DAB ensembleswithin a 7 MHz television channel. This is illustrated schematically for Channels 11 and12 in Figure 7.31. The four blocks in each channel are numberedA toD.Korea adopted aslightly different channel raster in Band III.
In the L-Band the 23 frequency blocks are labeled LA through LW in Europe;however, not all of these blocks are available for terrestrial DAB. In Canada thefrequency blocks are labeled by the numbers 1 through 23. In a number of countriessuch as Canada where Band III is not available, only the L-Band spectrum can be usedfor terrestrial DAB.
In addition to frequency bands and channel raster, international agreement on afrequency plan is required before broadcasters can start to transmit services on aparticular frequency or block. In order to reach such agreement, it is necessary to definecriteria for sharing the use of frequency blocks in different geographical areas, i.e. toensure spectral and/or spatial decoupling of transmissions. This can be achieved bydefining a maximum allowed interfering field strength at the border of a neighbouringservice area which uses the same frequency or by restricting the power of a transmitter ornetwork to an allowed limit (or a combination of both). Such international agreementsare fixed in frequency plans with their associated procedures to rule the implementationof the networks and the modification of the plans. The latter aspect of modification of afrequency plan is of utmost importance since it allows for an adequate development ofthe broadcasting services.
216.928 220.352
218.640 222.064
223.936
225.648
227.360
229.072
230223216
CB DACB DA
Channel 12Channel 11
Figure 7.31 Block allocations in Channels 11 and 12 (all frequencies in MHz)
308 Digital Audio Broadcasting
![Page 336: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/336.jpg)
The remaining sections of section 7.8 describe the existing frequency plans for T-DAB,how frequencies are allocated and the practice of frequency coordination.
7.8.2 The Frequency Planning Conferences for DAB in Europe
This section describes the history and development of frequency plans for terrestrialDAB in Europe. The principles of the currently valid plans and rules for coordination aredescribed in section 7.8.4.
7.8.2.1 Wiesbaden 1995 (WI95)
In 1995 CEPT established in Wiesbaden the first frequency plan for terrestrial DAB inEurope [CEPT, 1995]. The plan is based on the allotment concept: Geographical areasare identified where a frequency block may be used by an administration with certaininterference restrictions, however, without specifying the detailed characteristics of thenetwork. For more details see section 7.8.4. The allotment concept is in contrast tothe traditional assignment planning concept where the detailed characteristics of anytransmitter entering in the plan are fixed.
Two coverage layers were planned for each country, i.e. a homogeneous coverage conceptwas realised where in each location of the planning area two DAB multiplexes can bereceived. One layer was planned in Band III, mainly in channel 12. The other layer wasplanned in the L-Band, where nine frequency blocks (LA – LI) were available. This is validformost of theCEPT countries with only a few exceptions, e.g. France, where at that time noBand III usage by DAB was possible and therefore two L-Band layers were realised. Asreception mode a mobile environment had been assumed and for each frequency range onereference network was defined. For the concepts of layers and of reference networks see alsosection 7.8.4. The Wiesbaden 1995 frequency plan and agreement is called WI95.
7.8.2.2 Maastricht 2002 (MA02 and WI95revMA02)
In 2002 CEPT extended the L-Band frequency plan for terrestrial DAB by another sevenfrequency blocks (LJ – LP). For each CEPT country a further DAB layer was madeavailable in this band. In order to accommodate also the needs for smaller service areastwo additional reference networks were defined which cover a smaller area and whoseinterference potentials are reduced with regard to the original first L-Band referencenetwork. Details can be found in [BPN 030] and [CEPT, 2002b]. This extended DABfrequency plan for the L-Band is called MA02.
Since with MA02 the L-Band part of the WI95 plan was shifted into a separatefrequency plan the remaining part relating to Band III was formally revised and calledWI95revMA02. However, no modifications were made with regard to the plan entriesand procedures [CEPT, 2002a].
7.8.2.3 Geneva 2006 (GE06)
In 2006 the ITU Regional Radiocommunication Conference (RRC-06) in Genevaestablished a frequency plan in Region 1 (more exactly: ‘in parts of Region 1 and Iran’)
The Broadcast Side 309
![Page 337: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/337.jpg)
for the introduction of digital broadcasting, called GE06 [RRC06, 2006], [O’Leary, 2006].This frequency plan covers both a large planning area (Europe, Africa, RCC countries,Middle East and Iran) and the broadcasting Bands III (174 MHz - 230 MHz) and IV/V(470MHz – 862MHz)which form themajor part of the spectrum used by broadcasting. InGeneva, T-DAB was assumed as the standard system for audio broadcasting and DVB-Tfor television broadcasting. Whereas Band IV/V was reserved for DVB-T only, Band IIIcould be used in a mixed way for both T-DAB and DVB-T according to the wishes of theadministrations. The GE06 plan allows allotment plan entries as well as assignment planentries; however, in Europe for T-DAB only allotments have been entered.
A 7 MHz channel raster for DVB-T was assumed in Band III in Europe and theidentical frequency block raster of WI95 was adopted for T-DAB. Throughout Europea mixed T-DAB/DVB-T usage was assumed for Band III with one DVB-T layer andthree T-DAB layers. In most cases the former WI95 layer in Band III now forms one ofthe GE06 T-DAB layers. In total, more than 8000 DAB plan entries are found in theGE06 plan.
The technical criteria used in GE06 for DAB are to a large extent taken from WI95(the technical annex of which has been transferred to the ITU context in [BS.1660]). Animportant improvement has been achieved in GE06 by introducing a portable indoorreception mode for DAB as an additional receiving environment. In fact, most of theEuropeanDAB plan entries now are based on this reception mode which allows for highertransmitter powers. Accordingly, an additional reference network with increased trans-mitter powers by 9 dB was introduced. More technical details are given in section 7.8.4.
An interesting new frequency planning mechanism was introduced in GE06 with theso-called envelope concept. It allows for the operation of a different transmissionsystem – technically as well as regulatory – as indicated in the plan entry as long ascertain regulatory and technical constraints are fulfilled.
7.8.2.4 Constanta 2007 (WI95revCO07 and MA02revCO07))
In 2007 CEPT adapted in Constanta the WI95revMA02 frequency plan relating to BandIII to the fact that the major part of this band is now ruled by GE06. Apart from minorparts – channel 13 plan entries (230 MHz – 237 MHz) and one plan entry in Band I (47MHz – 68 MHz) – WI95 relating to VHF was abrogated. A transition period wasestablished until 2012 within which WI95 plan entries are protected [CEPT, 2007a].
With regard to the L-Band, Constanta 2007 confirmed the procedures and the fre-quency plan ofMa02 (MA02revCO07). In addition, a concept similar to that of GE06 wasagreed which allows also for the implementation of other mobile multimedia systems thanDAB, including the aggregation of frequency blocks. However, no indoor reception modehas been defined for the L-Band as was introduced in Band III in GE06 [CEPT, 2007b].
7.8.3 The Frequency Plan for DAB in Canada
As an example of a non-European frequency plan for DAB the case of Canada isdescribed.
310 Digital Audio Broadcasting
![Page 338: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/338.jpg)
In Canada, the 23 blocks of the 1.5 GHz Band were allotted throughout the countryexcept in western and eastern Canada where the upper five blocks had to be left unused toaccommodate Mobile Aeronautical Telemetry systems operating in various locationswithin the USA. The centre frequency of these blocks is slightly different from those inEurope since no duplication of the Band III spacing was needed. The raster is centred withrespect to the band (i.e., centre frequency of the middle block 12 is exactly at 1.472 GHz,with the L-Band frequency allocation ranging from 1.452 GHz to 1.492 GHz) and theblocks have their centre frequency separated by 1.744 MHz, leaving a guard band of48 kHz at both ends of the band. The resulting DAB plan allowed all current AM andFM broadcasters to be accommodated.
7.8.4 Allocation of Frequencies and Practice of Coordination
This section describes the concepts that are applied in the present frequency plans forDAB, gives an overview of the technical aspects that underlie these concepts and givesinformation about the regulatory aspects for the modification of a plan entry and theimplementation of a network.
7.8.4.1 The Allotment Concept
Theallotment conceptwas introduced for the first time in the broadcast field in theWiesbaden1995 frequency plan for DAB [CEPT, 1995]. In the allotment concept, geographical areas areidentified where a frequency is used with certain restrictions regarding the outgoing inter-ference produced by the network implemented in this area. Different from the previousbroadcast approach – the assignment approach – no detailed specification of the character-istics of the individual transmitters of the network is necessary. It is left to the particularnetwork implementation to keep the overall restrictions regarding the outgoing interference.
The allotment concept is the adequate frequency planning approach for transmissionsystems which allow for single frequency networks. It gives more freedom to the networkplanner and allows for a better adaptation of the technical aspect of frequency planning to thedesignof broadcast service areaswhich are determinedby social, cultural andpolitical aspects.
In frequency planning the impact of the outgoing interference originating from a networkis relevant. Since with the allotment concept the real network implementation is not yetknown at the stage of the establishment of the frequency plan – and it is not even desirable tofix it once and forever – a representative network is defined in order to describe the expectedand, under a regulatory aspect, allowed outgoing interference. The outgoing interference ofa network is called its interference potential and the representative, artificial network iscalled reference network. On the basis of these assumptions and definitions a frequency plancan be synthesised where certain frequency re-use conditions have to be obeyed.
As an example, Figure 7.32 shows the GE06 plan for frequency block 12D in CentralEurope. The figure clearly illustrates how the different national approaches have resultedin different uses of the same frequency, including the mixed use of this channel orfrequency block by DAB and DVB-T, respectively.
Reference networks are described in more detail in the next section. A comprehensivetreatment of reference networks and their interference potentials can be found in [ECC049], [Brugger, 2005].
The Broadcast Side 311
![Page 339: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/339.jpg)
7.8.4.2 The Concept of Reference Networks
The criteria for sharing a frequency are based around the predicted levels of interferingsignals from one or more service areas into other areas using the same block. These signallevels must be kept below an acceptable threshold. Calculation of the levels is performedon the basis of specified service areas and ‘reference networks’ of transmitters that arefelt to be sufficiently representative of a practical network. For the assessment ofcompatibility the interfering signal levels arriving in an area, from the reference networkof another co-channel area, are calculated, and if the levels are sufficiently low, thensharing of that block is possible. Planning models are given in [BPN 003], [Brugger, 2005]for VHF networks and in [BPN 030] for L-band networks and in addition in theconference texts [RRC06, 2006], [CEPT, 2007b].
Figure 7.33 shows an example of such a reference network in Band III for mobilereception as it was used for GE06. The main transmitter in the reference hexagon has100Woutput power and the six peripheral transmitters have 1 kW each. Since directionalantennas are assumed for the peripheral transmitters, this set-up is called a closed
Figure 7.32 Allotments in frequency block 12D in the GE06 plan in Central Europe
312 Digital Audio Broadcasting
![Page 340: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/340.jpg)
hexagon structure. An effective antenna height of 150m is assumed and the distancebetween each of the transmitters is 60 km. GE06 used this reference network also as thesecond reference network with an identical geometry but 9 dB higher transmitter powersfor a portable indoor reception environment. The properties of the reference networksare summarised in Table 7.12.
Main transmitter(omnidirectional antenna)
Peripheral transmitter (antennawith 12 dB front-to-back ratio)Coverage Area
1kW
1kW
1kW
1kW
1kW
1kW60 km
0.1kW
60 km
Figure 7.33 GE06 reference hexagon for Band III
Table 7.12 Reference networks for mobile and portable indoor reception in Band III (GE06)
Reference Network RN – mobile reception RN – portable indoorreception
Reception mode mobile portable indoor
Type of network closed closedGeometry of service area Hexagon HexagonNumber of transmitters 7 7
Geometry of transmitter lattice Hexagon HexagonDistance between transmitters d 60 km 60 kmService area diameter D 120 km 120 km
Transmitter effective antennaheight
150m 150m
Peripheral Transmitter antennapattern
Directional 12 dBreduction over 240�
Directional 12 dB reductionover 240�
Central Transmitter antennapattern
Non-directional Non-directional
Peripheral Transmitter e.r.p. 30.0 dBW 39.0 dBW
Central Transmitter e.r.p. 20.0 dBW 29.0 dBW
The Broadcast Side 313
![Page 341: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/341.jpg)
Because of the different propagation conditions in the L-Band, the reference networksfor this frequency range have different properties. The most prominent difference is thereduced distance between the transmitters. Table 7.13 summarises the properties of thethree reference networks applied in MA02.
7.8.4.3 The Layer Concept
In both the CEPT and the ITU frequency planning conferences a layer concept wasapplied for Europe. In this approach a homogeneous coverage concept is adopted wherein each location of the planning area the same number of programmes or multiplexes aremade available. In this way full area coverage of all countries is achieved. This concept ispreferably applied in frequency planning conferences since it allows for a simple realisa-tion of the principle of equitable access to the radio spectrum – the holy grail ofinternational frequency planning. However, in practice – when a frequency plan isgoing to be implemented – often a mixture of full area coverage and population centrecoverage with aggregation of frequencies in the latter is realised.
The MA02 plan provides two DAB layers for each country in the L-Band and GE06provides three DAB layers for each country in Band III.
7.8.4.4 The Envelope Concept
As well in the GE06 as in the MA02revCO07 agreement the envelope concept was intro-duced as a new frequency planning mechanism. It allows for the operation of a different
Table 7.13 Reference networks for mobile reception in the L-Band (MA02)
Reference Network RN 1 RN 2 RN 3
Reception mode mobile mobile mobileType of network open closed closedGeometry of service area Hexagon Hexagon Hexagon
Number of transmitters 7 7 4Geometry of transmitterlattice
Hexagon Hexagon Square
Distance betweentransmitters d
15 km 26 km 16 km
Service area diameter D 60 km 45 km 23 km
Transmitter effectiveantenna height
150m150m (central)50m (peripheral)
50m
Peripheral Transmitterantenna pattern
Non-directionalDirectional 12 dBreduction over 240�
Directional 12 dBreduction over 225�
Central Transmitterantenna pattern
Non-directional Non-directional n.a.
Peripheral Transmitter
e.r.p.30.0 dBW 37.0 dBW 30.0 dBW
Central Transmitter e.r.p. 27.0 dBW 31.0 dBW n.a.
314 Digital Audio Broadcasting
![Page 342: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/342.jpg)
transmission system as indicated in the plan entry as long as not more interference isproduced andnotmore protection is claimed as allowed andgivenby the original plan entry.
As an example, this concept is, in particular, of interest for DAB since it allows for theoperation of T-DAB multiplexes under a DVB-T plan entry. The possible applicationsare investigated in [ECC 116]. The conclusion is that DVB-T plan entries for portableindoor reception are well suited for a conversion to DAB, but also with DVB-T planentries for portable outdoor reception a conversion is possible.
In particular, it allows for the operation of four T-DAB multiplexes under a DVB-Tplan entry in Band III. In fact, currently, several European administrations think aboutusing their DVB-T plan entries in Band III for DAB/DMB implementations. However,the reception mode associated with the DVB-T plan entry should comply with theintended DAB reception mode. This is not a matter of course, since several administra-tions have chosen fixed roof-top reception as the reception mode for DVB-T.
7.8.4.5 Multilateral Coordination and Modification of a Frequency Plan
A frequency plan for a broadcasting system starts its existence with the establishment bya planning conference. However, time going on, it does not remain in its original state.Provision has to be made for its modification and development in order to adapt it tofuture needs. Actually, this is a major and important feature of a broadcasting frequencyplan. Both the GE06 and MA02revCO07 plans allow for this possibility, although theyare already relatively dense. Nonetheless, they give room for addition of further allot-ments or extension of existing allotments.
From a regulatory point of view, a modification of a frequency plan – either additionof a plan entry or modification of a plan entry – has to be agreed on by all potentiallyaffected countries. Traditionally, the procedures for such a modification are treatedin Article 4 of an international frequency plan agreement. This is why such rules arecalled ‘Article 4 procedures’. The first step in such a procedure is the identification ofthe potentially affected administrations. Secondly, a certain time frame for agreement/disagreement to the proposed plan modification has to be kept with certain duties andresponsibilities of the involved administrations and the respective plan managementbody, which is in the case of GE06 the ITU Radiocommunication Bureau (BR) andin the case of MA02revC007 the European Radiocommunication Office (ERO) ofthe CEPT.
In MA02revCO07 a country is regarded as potentially affected by a proposed mod-ification of the plan if the interference potential of the respective – new or modified – planentry exceeds the value of 38 dB(mV/m) at the border of the country. In GE06 thecriterion is similar: a trigger field strength contour at 12 dB(mV/m) is constructed fromthe reference network of the plan entry to be modified or newly introduced. All countrieslying inside this contour are regarded as potentially affected.
The trigger field strength value in GE06 is lower, i.e. more sensitive, for severalreasons. Firstly, for the GE06 plan, a more conservative approach was taken with regardto the identification of potentially affected administrations, as a principle. Secondly, inGE06 not only DAB services are to be protected in Band III, but also analogue televisionservices (for a transition period until 2015) and DVB-T services. For these services, cases
The Broadcast Side 315
![Page 343: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/343.jpg)
exist which are more sensitive to inference from a DAB service than is intra-serviceinterference of DAB.
In particular for GE06, the coordination rules and procedures are much more com-plicated as described in this short section. This is due to the fact that GE06 is a mixedassignment-allotment plan where the principles of both approaches have been combined.Moreover, additional rules and procedures apply to other, non-broadcasting services inBand III and L-Band.
A detailed description of the procedures can be found in the agreement texts [CEPT,2007b] and [RRC06, 2006] and for GE06 in addition also in [BPN 083].
7.8.4.6 Bilateral Coordination of a Frequency Plan
In addition to multilateral international agreements, bilateral agreements between coun-tries can allow additional use of frequency blocks, particularly where the geography andthe topography are favourable. Administrations can agree on more sophisticated meth-ods for the determination of interference, e.g., topography-based field strength predic-tionmethods, or agree on higher interfering field strengths in particular cases. In practice,bilateral talks and agreements are a powerful means of improving the usage of thespectrum in border regions. As an example, already during the planning conferenceRRC-06 many special agreements between administrations have been establishedwhich rendered the overall planning easier.
7.8.4.7 Regulatory Aspects of the Implementation of Networks
In the past, for analogue broadcasting systems, the regulatory aspects of networkimplementation were relatively simple since in frequency plans for analogue systems,which were assignment plans, the transmitter characteristics were already determined.This is different from digital broadcasting systems where the allotment concept has beenapplied. Here only an upper bound for the outgoing interference of the network to beimplemented is defined, and a separate regulatorymechanism is needed in order to ensurethat the interference potential of the network implementation does not exceed theallowed upper bound.
Such a mechanism can be realised in various ways. In the CEPT agreementMA02revCO07 each allotment having been entered into the frequency plan is suppliedwith a set of so-called ‘calculation test points’ which lie at a certain distance from theborder of the allotment area. When a network is implemented the interference potentialof the network is calculated at the calculation test points and checked against its max-imum allowed field strength fixed in the frequency plan agreement. If the interfering fieldstrength of the network implementation lies below this upper bound the implementationconforms to the plan.
A similar mechanism is implemented in the GE06 agreement, called ‘conformitycheck’. There the calculation points are generated by a specific geometrical algorithmand the interference potential of the network implementation is compared with theinterference potential of the reference network that is associated with the allotment
316 Digital Audio Broadcasting
![Page 344: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/344.jpg)
plan entry. If the latter is not exceeded by the network implementation conformity withthe plan is achieved.
These checks are performed by the respective plan management bodies, EROfor MA02revCo07 and ITU-R BR for GE06. Details of the technical and regulatoryprocedures can be found in the agreement texts of these frequency plans [RRC06, 2006],[CEPT, 2007b] and also in [BPN 083].
The Broadcast Side 317
![Page 345: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/345.jpg)
8
The Receiving Side
8.1 General
DAB is different from the traditional analogue audio broadcasting systems like AM andFM. For example, DAB is a broadband transmission system, transmitting several audioprogrammes and data channels over the same frequency. The frequency bands assignedfor DAB broadcasting are different from the traditional broadcasting bands and areseparated almost by a decade. The transport of the information, audio and data alsoemploys new concepts like audio compression (see Chapter 3). Therefore, new receiverconcepts had to be developed.
Since the DAB system is fairly complex in terms of computational requirements, it wasevident that there was a need to design specific, highly integrated chip-sets covering boththe analogue and digital parts of the system. These chip-sets are the building blocks for allkinds of DAB receivers and are the vital basis for cost-effective solutions. However,owing to the rapid developments in PC technology, modern PCs are able to handle thedigital part of a DAB receiver.
Today, the various types of DAB receivers can be categorised as follows:
• Home receivers including HiFi tuners, kitchen radios, clock radios and portable stereosystems (‘boomboxes’).
• Car radios, either a head unit with a digital radio black box or all-in-one.• Portable receivers and mobile phones including DAB/DMB.• PC-based receivers whereas the receiver is a DAB-enabled notebook or a USB
device.• Monitor receivers for network monitoring.
The design of a good and inexpensive DAB receiver is not a trivial task. Expertise fromdifferent engineering fields is required for a successful development. System expertise ofthe DAB standards and also the increasing number of other broadcast standards thereceiver supports is a prerequisite. Since nowadays more and more features of digital
Digital Audio Broadcasting: Principles and Applications of DAB, DAB+ and DMB, Third Edition Edited by W. Hoeg and T. Lauterbach© 2009 John Wiley & Sons, Ltd. ISBN: 978-0-470-51037-7
![Page 346: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/346.jpg)
signal processing are implemented in software, the increasing complexity requiresadvanced software engineering capabilities. A good receiving performance as one ofthe major headstones of a broadcast receiver mainly depends on the quality of the RFcircuitry design and consequently on the knowledge of the RF experts. Last but not least,HMI (human machine interface) experts shall ensure an easy and comfortable operationof the receiver.
This chapter delivers an insight into these different aspects of receiver technology.
8.1.1 Normative Receiver Requirements
Several normative requirements related to DAB receivers have been standardised duringthe last few years. An overview of these standards is provided in Table 8.1. The scope ofthe various normative standards is referred to in subsequent sections as indicated inTable 8.1.
The most important among these standards are the ‘minimum receiver requirements’,standardised by CENELEC [EN 50248], which define the minimum and typical
Table 8.1 Normative receiver requirements
Title Scope Reference Section
CENELEC: EN 50 248 (2001). Characteristics ofDAB receivers.
Minimum receiverrequirements
[EN50248]
8.1
EACEM: TR-004 (2000). Application of the EMC
Directive 89/336/EEC for Digital Audio Broadcastreceivers.
EMC directive [TR-004] 8.1
ETSI: EN 300 401 V1.4.1 (2006). Radio broadcastingsystems; Digital Audio Broadcasting (DAB) to mobile,
portable and fixed receivers.
DAB standard [EN300401]
8.1
ETSI: TS 102 563 V1.1.1 (2007). Digital AudioBroadcasting (DAB);Transport of Advanced AudioCoding (AAC) audio
Audio coding [TS102563]
8.4
CENELEC: EN 50 255 (1997). Digital Audio
Broadcasting system � Specification of the ReceiverData Interface (RDI).
Data interface [EN
50255]
8.5
CENELEC: EN 50 320 (2000). Digital AudioBroadcasting system � Specification of the DABcommand set for receivers (DCSR).
Data interface [EN50320]
8.5
ETSI: EN 301 700 V1.1.1(2000). Digital AudioBroadcasting (DAB); VHF/FM Broadcasting:
cross-referencing to simulcast DAB services byRDS-ODA 147.
FMcross-referencing
[EN301700]
8.8
ETSI: TS 102 368 V1.1.1 (2005). Digital AudioBroadcasting (DAB); DAB-TMC (Traffic MessageChannel)
TMC [TS102368]
8.8
320 Digital Audio Broadcasting
![Page 347: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/347.jpg)
performance of DAB receivers. EN 50248 is the result of a joint effort of the receiverindustry and experts from Eureka 147. Some important details are discussed in para-graph 8.1.2. In addition, EACEM [TR-004] identifies specific references, requirements,methods and test conditions for EMC tests for DAB receivers. Two more standards withhelpful information are available from ETSI. First, [TR 101758] describes the generalprinciples for deriving values for field strength and the compatible receiver sensitivity forsatisfactory operation of aDAB system. Second, [TR 101496-2] gives guidelines and rulesto comply with the system features which should also be taken into account by receivermanufacturers. Both support the interpretation of the on-air signal. Additionally, forDMB receivers a requirement specification [EN 62516] is available as a draft versionconsidering the special needs for portable DMB services. It includes implementationguidelines, receiver requirements for the audio, video and data signal as well as RFperformance specification.
8.1.2 Discussion of the Minimum Receiver Requirements
The standard [EN 50248] describes the receiver characteristics for consumer equip-ment with focus on the functional performance requirements, interfaces and theminimum performance levels including the measurement methods. For a long time,the performance levels were up for discussion because of the different points ofview of the involved parties. On the one hand very strict requirements for thereceiver reduce the costs of the transmission network regarding the connectionbetween network coverage and the sensitivity of the receiver. But on the otherhand they also cause expensive receivers. In contrary, too weak requirements couldcause bad receivers. But the time showed that some manufacturers brought muchbetter receivers onto the market in comparison to the requirements of thestandard.
In the following, the most important functional performance requirements are listed.For a detailed description see [EN 50248].
Table 8.1 (continued )
Title Scope Reference Section
ETSI: TR 101 758 (2000). Digital Audio Broadcasting(DAB); Signal strength and receiver parameters;Targets for typical operation.
Receiverrequirements
[TR101758]
8.1
ETSI: TR 101 496-2 V1.1.2 (2001). Digital AudioBroadcasting (DAB); Guidelines and rules for
implementation and operation; Part 2: System features.
Implementationrequirements
[TR101496-2]
8.1
IEC: EN 62 516 (2008). Terrestrial digital multimediabroadcasting (T-DMB) receivers (Draft)
DMB receiverrequirements
[EN62516]
8.1
ETSI: TS 101 757 (2000). Digital Audio Broadcasting(DAB); Conformance Testing for DAB Audio.
DAB audiodecoder
[TS101757]
8.4
The Receiving Side 321
![Page 348: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/348.jpg)
• The audio decoder shall conform to the relevant standards (see Chapter 3) and shall beable to decode audio streams with 24 kHz and 48 kHz sampling frequency as well asbit-rates up to 256 kbps. Higher bit-rates are optional.
• The receiver shall detect the transmission mode (see section 2.2.1) of the DAB signaland switch automatically to the appropriate mode.
• To gain access to the desired service, the receiver must decode the MCI (see sections2.3, 2.5), make the information available to the human machine interface for selection,and then output the selected service.
• The receiver shall follow the in advance signalled multiplex re-configurations(see section 2.3.7). For services which are unchanged, the reception should continuewithout adverse effect.
• In order to allow service following of a particular DAB service, the ability of a mobileDAB receiver to switch automatically to another ensemble is mandatory.
The performance levels and measuring methods are listed in the following. The measur-ing shall be performed for all frequency bands covered. Using standardised measuringmethods ensures some comparability between receivers. But the standard does notprovide a description of how the measurement results should be presented. This leadsto misunderstandings since some manufacturers average several measurement runs,others take the worst result. Most of the tests consider the RF performance of thereceiver. As criterion the BER is used which should be below 10�4 after the convolutionaldecoder with a code rate of ½ which ensures a nearly undisturbed audio signal.
• The sensitivity gives an indication of the lowest RF-input level and field strength of theDAB receiver for the given BER. In other words, it measures the ability of the receiverto decode weak signals from transmitters far away.
• In contrast to this, the maximum input power gives the maximum input level thereceiver can properly decode, that means its ability to decode strong signals fromtransmitters very close.
• The selectivity of a receiver is a measure of its ability to discriminate between a wantedsignal to which the receiver is tuned and unwanted signals, e.g. interfering signalentering the RF-Input. Two kinds of measurements are considered, adjacent channelsselectivity and far-off selectivity. For the first case, the unwanted signal is located in theneighbouring channel of the wanted signal. For the second case, the unwanted signalhas a frequency offset higher than 5 MHz. For the interfering signal DAB, DVB-T,analog TV, FM and other systems have to be taken into consideration.
• The measurement in Rayleigh channels provides a reference to the performance in adynamically changing environment. The channel profiles were used from [COST 207]and simulate the behaviour in typical urban, rural and SFN environments at differentspeeds. The two considered parameters are the sensitivity and the acquisition time aftersynchronisation loss.
An evaluation of 15 consumer receivers based on the EN 50248 standard was performed[Schiphorst, 2008]. The publication gives a good overview of current receiver performancein Band III and L-band. The experiments reveal that there is a large difference in perfor-mance between consumer receivers: The 25% worst performing consumer receivers fail
322 Digital Audio Broadcasting
![Page 349: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/349.jpg)
most experiments and the 75% best performing consumer receivers pass all experiments.Most difficulties appeared with non-adjacent channel selectivity in Band III and withdecoding a DAB signal applying the [COST 207] rural area channel model in L-band.
8.1.3 Receiver Architecture Overview
Figure 8.1 presents a block schematic of a typical DAB receiver. The signal received fromthe antenna is processed in the radio frequency (RF) front-end, filtered and mixed to anintermediate frequency or directly to the complex baseband. The resulting signal isconverted to the digital domain by corresponding analogue-to-digital converters(ADCs) and further processed in the digital front-end to generate a digital complexbaseband signal. This baseband signal is further OFDM demodulated by applying anFFT (Fast Fourier Transform), see sections 2.2.1 and 8.3.2.
Each carrier is then differentially demodulated (DQPSK, see section 8.3.3) and thedeinterleaving in time and frequency is performed. Finally, the signal is Viterbi decoded,exploiting the redundancy added at the transmitter side for minimising the residual errorcaused by transmission errors. After the Viterbi decoder, the source coded data, likeaudio and data services and FIC information, are available for further processing. Theselected audio sub-channel is decoded by the audio decoder, whereas a data streammightbe transferred to an external decoder through the receiver data interface (RDI, seesection 8.5) or other interfaces.
Details of each processing step are provided in the subsequent sections 8.2 (RF Front-end), 8.3 (Digital Baseband Processing), 8.4 (Audio Decoder) and 8.5 (Interfaces).
RFFront-end ADC
DigitalFront-end FFT
De-interleaving
ViterbiDecoder
DQPSKDemodulation
AudioDecoder
DataDecoder
RDI(Interfaces)
Antenna
AudioDAC
Display
ExternalDecoder
Figure 8.1 Receiver block schematic
The Receiving Side 323
![Page 350: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/350.jpg)
8.2 RF Front-end
Since a COFDM-based DAB system has some special properties, traditional broad-casting receiver designs that have been designed for analogue transmission standardscannot be used. The new digital system imposes some special requirements which led tonew receiver architectures.
8.2.1 Requirements
ACOFDM signal can more or less be viewed as band-limited white noise. This is becausethe signal contains many individual carriers that are independently modulated accordingto the slow symbol rate, but as the individual carriers are completely uncorrelated, thesignal behaves like Gaussian noise. In the frequency domain, the signal spectrum islimited according to the allocation of the sub-carriers and looks like a ‘Simpson’shead’, very similar to a WCDMA (Wide-Band CDMA) signal. In the real world,insufficient filtering and transmitter non-linearities cause ‘sidelobes’ in the signalspectrum, limiting the adjacent channel rejection of the system (see section 7.4.5).Figure 8.2 presents the spectrum of a received DAB signal.
The special properties of COFDM impose some requirements on the receiver’s RFcircuits as described in the following subsections.
−100198.4
Leve
l [dB
m]
198.6 198.8 199 199.2 199.4
f[Mhz] -->
199.6 199.8 200 200.2
−95
−90
−85
−80
−75
−70
−65
−60
−55
−50
Figure 8.2 DAB signal in frequency domain. The ripple is caused by multipath propagation
324 Digital Audio Broadcasting
![Page 351: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/351.jpg)
8.2.1.1 Noise Influence
Different noise sources influence the reception performance of a receiver. Man-madenoise arises from electrical appliances in industry and homes and will not be consideredhere. Thermal noise exists in every receiver due to the random thermal motion of theelectrons. It can be modeled as additive white Gaussian Noise (AWGN). Crucial for thedecoding quality in the receiver is the signal-to-noise ratio (SNR). The noise figure isdefined as the ratio between the SNR at the antenna input and the SNR at the demodu-lator. In the design phase of a receiver, the total noise figure is calculated from the noisefigures of its components as amplifier, mixer etc. using Friis formula for a cascade ofstages. A low noise figure corresponds to good receiver sensitivity and the ability todecode weak signals. Figure 8.3 shows the bit error ratio (BER) in the AWGN channelover the input power for a typical DAB receiver. Both curves, with and without channeldecoding, are diagramed. The BER after Viterbi decoding has to be below 10�4 toachieve an undisturbed audio signal.
8.2.1.2 Non-Constant Envelope
Unlike many phase-modulated systems like FM, GSM and AMPS, limiting amplifierscannot be used, since the signal would be clipped and the amplitude part of the informa-tion would be lost. Limiting amplifiers would eliminate the requirement for gain control,
10–1
10–2
10–3BER after Viterbi
BER before Viterbi
Bit
erro
r ra
tio (
BE
R)
10–4
–100 –99 –98 –97 –96 –95power [dBm]
–94 –93 –92 –91 –90
Figure 8.3 Bit error ratio in the AWGN channel for a typical DAB receiver
The Receiving Side 325
![Page 352: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/352.jpg)
greatly simplifying systems design. A COFDM receiver requires a highly linear signalpath from the antenna to the demodulator.
Because of mobile operation, the average signal amplitude constantly varies by about20 dB. Hence, for COFDM receivers, careful AGC (Automatic Gain Control) design is avital feature.
A special scheme called a null symbol (see section 2.2.2), a break in the transmitted signalof 1 ms inDAB transmissionmode I, for example, is used for synchronisation. Special carehas to be taken to pause the AGC circuit during reception of the Null-symbol.
8.2.1.3 Phase Accuracy
Another noise source is phase noise which is a random perturbation in the phase of asteady sinusoidal waveform. It is caused by the oscillator in the receiver. According to[Stott, 1998] phase noise produces two effects in OFDM-systems. The common phaseerror arises simultaneously on all carriers and generates a rotation of the whole signalconstellation. It can be compensated in the receiver by clever implementations in thedigital signal processing part. The other effect can be described as thermal-noise-like andamounts to inter-carrier interference which degrades the sensitivity. The overall phasenoise is usually expressed in units of dBc/Hz in various offsets from the carrier frequency.Figure 8.4 shows an example of such a phase noise mask for DAB. The region near DC is
–45
–50
–55
–60
–65
–70
φ (f
) dB
c / H
z
–75
–80
–85
–90
100 101 102 103
Frequency/Hz104 105
Figure 8.4 Typical phase noise mask for DAB
326 Digital Audio Broadcasting
![Page 353: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/353.jpg)
induced by the crystal itself and the plateau at medium frequencies is determined by thePLL bandwidth. The compliance with the values in the Figure 8.4 guarantees negligibleperformance degradation by phase noise.
Since the Eureka 147 DAB system partly uses the same frequencies as classical analogueTV signals, conventional TV tuners might be an option for a DAB receiver for Band III.
For TV tuners, VCO (Voltage-Controlled Oscillator) phase noise is usually of noconcern. The signal information is contained in the amplitude; the signal phase containsno information. Even for the signal-to-noise ratio of FM sound, phase noise is notimportant since in most analogue receivers the stable signal carrier of the transmittedsignal is used to generate the 5–5.5 MHz sound carrier according to the CCITT TVstandard used in many countries.
The COFDM signal consists of many individual carriers which are modulated inphase. A VCO with low phase noise (jitter) is essential for downconverting the signalfrom the input frequency to a proper IF. Although absolute phases are not importantbecause of the differential phase modulation, only a total RMS phase error of less than10 degrees can be tolerated without affecting the BER of the system. Therefore, high-performance VCO and PLL circuits are required, exceeding the specifications of those foranalogue systems.
8.2.1.4 High Linearity
All active components as amplifiers and mixers in the RF-front-end show a weaklynonlinear behaviour. It is typically modelled using a low order polynomial and describedby the third-order intercept point IP3 related to the 3rd order term of this polynomial.The nonlinearities influence the reception performance in several ways. Firstly, thespectrum of the signal is broadening which leads to a limited performance when strongadjacent channels exist. Figure 8.5 shows a wanted DAB signal and an adjacent signal inboth diagrams. In the left picture, no interference occurs. In the right picture, theunwanted signal interferes with the wanted signal which can be seen in the shoulder ofthe adjacent channel signal. The effect relates directly to the selectivity value of thereceiver characteristic standard described in section 8.1.2. Secondly, two strong signalsat the frequencies f1 and f2 also generate an interference signal at the frequencies 2f1-f2and 2f2-f1. This case could happen in crowded DAB bands. Thirdly, the received signalitself will be disturbed by nonlinearities. This effect is negligible since the requirementsfor receiver linearity for the first effect are much stronger.
8.2.1.5 Wide Dynamic Range
DAB is a broadcasting system. An SFN may be viewed as a cellular network with eachcell reusing the same frequency. Unlike cellular phone networks, where typical cell sizesare as small as a single building, a typical ‘cell’ for Band III is 50 km in diameter, and forL-band 15 km. Transmission powers are up to several kW, for example 10 kW for theCanadian DAB system, while base stations for cellular networks only typically use up to10 W. This means that the receiver has to accommodate larger signals at the input,according to this difference in transmission power. While CDMA receivers are designedfor a maximum input power of –25 dBm, a DAB receiver should be operational for up to
The Receiving Side 327
![Page 354: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/354.jpg)
–15 dBm at the input in L-band. In Band III, maximum input levels are even morecritical. In this case, not just DAB transmitters with moderate power levels about1–10 kW are present. Strong TV stations occupy the same frequency band, with effectivetransmission powers of typically 100 kW. So it should be assumed that a nearby interferermay be up to 10 dB stronger than the strongest signal for L-band. [EN 50248] assumes amaximum input level of –5 dBm with linear circuit operation (see Table 8.2).
Although requirements are much harder than for mobile phone handsets, maximumsignal levels are not as high as for FM reception where 2 Vpp at the antenna input are notuncommon in critical reception situations. Since the antenna aperture and hence thereceived signal level become smaller for higher frequencies, the situation is better forDAB, where the input frequency always exceeds 174 MHz.
High input levels require high linearity, and high linearity is a constraint not in accordwith low-power consumption or good sensitivity. A DAB receiver must be optimisedmore for wide dynamic range and high selectivity, while a satellite receiver (e.g. GPSsystem) can be entirely optimised for a low noise figure only.
Pow
er [d
B]
–60
–50
–40
–30
–20
–10
0
Frequency [MHz]
178 179 180 181 182 183 184
0
–10
–20
–30
Pow
er [d
B]
–40
–50
–60
Frequency [MHz]
178 179 180 181 182 183 184
Figure 8.5 Spectrum of a DAB signal with adjacent signal, left picture without interference, rightpicture with interference
Table 8.2 Overview of the required values for the different receiver categories [EN50248]
Minimum requirement Mobile receiver Stationary receiver Portable receiver
Minimum input power(Sensitivity)
�81 dBm �81 dBm �81 dBm
Maximum input power
(VHF / L-Band)
�10 / �25dBm �15 / �25 dBm �20 / �25 dBm
Adjacent channel selectivity �30 dB �30 dB �30 dBFar-off selectivity �40 dB �40 dB �40 dB
Rayleigh channel performancesensitivity /acquisition time
�75 dBm<3000 ms
�75 dBm<3000 ms
�75 dBm<3000 ms
328 Digital Audio Broadcasting
![Page 355: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/355.jpg)
8.2.2 Analogue Front-end Concepts and Architectures
Besides the special signal properties of OFDM signals, the two widely separatedfrequency bands (see Table 8.3) bring about certain constraints for receiver design.
The centre frequencies of both bands are separated by a factor of 7–8. Unlike TV orDVB-T tuners which can basically cover the required frequency range with the samesingle-conversion architecture, it is not possible to extend a UHF tuner up to 1.5 GHz,for example.
On the other hand, the two bands are quite narrow and it is not necessary to supportreception at any frequency in between. This allows the design of special ‘dual-band’receiver architectures.
8.2.2.1 Direct Conversion/Zero-IF
A common approach for multiband receivers is to use no IF at all and to down-convertthe signal to an IF of zero (Figure 8.6). By doing this, any intermediate frequencytranslation steps that always bring about spurious reception frequencies, and hencespecial filter requirements, can be avoided. This approach is very promising and ispresently adopted in triple-band GSM handsets, completely eliminating the need for IFfilters [Strange, 2000]. Two or three switchable band select filters are used in front of theLNA (Low-Noise Amplifier). A similar architecture may be used for DAB and ispresently being investigated.
Table 8.3 DAB Frequency Band
Band Minimum Maximum
L–band 1452 MHz 1492 MHzBand III 174 MHz 239 MHz
LNA
Input Filter
Quadrature Mixer
LO
I
Q
Lowpass FilterLO + 90
Figure 8.6 Zero-IF DAB receiver
The Receiving Side 329
![Page 356: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/356.jpg)
This architecture, however, requires perfectly matched (with respect to amplitude andphase) low-pass filters in the I andQ signal path. For transmission systems with relativelysmall bandwidth (GSM: 20 kHz, IS95: 30 kHz), the required sample rates for the low-pass filters and ADCs are fairly low. For wide-band signals, more sophisticated low-passfilters are required. In addition, it has to be mentioned that this architecture requires twocompletely independent ADCs with corresponding good match. Usually the powerconsumption and costs are low but the performance is limited.
Themost severe technical problemof zero-IF receivers is LO feedthrough to the antennainput, causingaDCoffset in the IQsignal.ThisDCcomponenthas toberemovedforpropersignal processing, for example by capacitive coupling. This is not feasible with every mod-ulation scheme, but COFDM is perfectly suitable for this approach.
8.2.2.2 Receivers Based on TV Tuner Concepts
Since TV tuners for Band III are readily available, most DAB receivers basically use amodified ‘TV tuner’ for Band III. This implies a similar IF of 38.912MHz. The choice ofthe IF is determined by the required image rejection. With an IF of 38MHz, the spuriousimage reception frequency for the lower end of Band III (174 MHz) would be above theupper band of the TV band, at
f image ¼ 174þ 2� f IF ¼ 250 MHz : ð8:1Þ
This frequency assignment prevents strong TV/DAB stations at the upper edge of BandIII from acting as interferers for stations at lower frequencies. The spurious imagereception frequency moves away from Band III if a frequency towards the upper endof Band III is tuned in.
Of course, if a traditional TV tuner is used for DAB reception, the IF filter has to bereplaced by a proper DAB channel selection filter and the VCO has to be ‘cranked up’ forbetter phase noise performance.
Support for L-band can be added by a block downconversion. The width of L-band issmaller than the width of Band III, so it is possible to downconvert the complete L-bandwith an LO set to a fixed frequency down to Band III.
This concept, depicted in Figure 8.7, was originally developed inside the JESSI project[Jongepier, 1996]. It is often used in commercial receivers because several chip-sets basedon this concept are available.
This tuner concept brings about some problems, however, especially at L-band:
1. The IF of 38.912MHz is fairly high for direct processing by an ADC; usually a second(third in the case of L-band) IF is required.
2. The first IF frequency for L-band reception (which actually is Band III) is occupied bypossibly very strong interferers. If for example a –95 dBm L-band station should betuned with a –5 dBm blasting TV station present on the same frequency, more than 90dB isolation is required. This is technically hard to achieve.
3. Tuneable image rejection filters (‘tracking filters’) have to be used. These filters arebulky and are subject to parameter variations. Therefore, filters have to be manuallytuned or electronically adjusted, based on stored alignment data.
330 Digital Audio Broadcasting
![Page 357: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/357.jpg)
Since these tuners are highly optimised for TV reception and have a long designhistory, performance for Band III reception is usually good.
8.2.2.3 High-IF Tuner
Some limitations of the ‘JESSI’ tuner can be overcome by using upconversion for BandIII. This concept has also been employed for TV tuners and set-top boxes [Taddiken,2000]. A block diagram of a tuner derived from this tuner concept is given in Figure 8.8.The high-IF technique is used for Band III. L-band is down-converted, but also to high IF.
L-band1452–1492 MHz
L-band-Converter
VCO (fixed)
Band III170–240 MHz
Tracking-Filter
VCO (variable)
MixerIF-Filter38MHz
Dip
lexe
r
Figure 8.7 JESSI tuner
L-band1452–1492 MHz 1st Mixer
Band III170–240 MHz
Frequency divider
RF VCO
IF VCO (fixed)
1. IF-Filter919 MHz
2. IF-Filter30.72 MHz
12
Dip
lexe
r
Figure 8.8 Receiver with high-IF for Band III
The Receiving Side 331
![Page 358: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/358.jpg)
The most important advantage of this concept is the fact that the spurious imagereception frequency for Band III is moved to very high frequencies. Therefore, no tune-able pre-selection filters are required, eliminating the requirement to manually/electro-nically adjust any components. With careful circuit design of the Band III LNA, trackingfilters can be replaced by a band-pass filter. This enables a dramatic reduction of the formfactor of the tuner, allowing compact designs for portable applications.
The first IF may be chosen according to two aspects:
1. IF should not be used by high-powered wireless services.2. A common VCO with a limited tuning range should be used.
A possible approach might be to use an IF at 650 MHz, exactly in the middle of bothbands. This frequency is, however, also used by strong UHF TV stations, but mostimportantly, this arrangement would place Band III at the image frequencies for L-bandreception and L-band at the image frequencies for Band III reception, again causingisolation problems. A solution is to use frequency dividers for deriving the LO frequen-cies from a common VCO.
In the AD6002/6003 chip-set [Titus, 1998], [Goldfarb, 1998], [Clawin, 2000], an IF of919MHz is used. This frequency allows optimumBand III image suppression, is not usedby amajor service (actually, it is in the gap betweenGSMuplink and downlink), and onlyrequires a VCO with a small tuning range of about 10%.
Based on the concept of the AD6002/6003 chip-set, a single chip DAB tuner waspresented at IFA 99 by Bosch, sized about 2 cm � 3 cm (see Figure 8.9). This high-IFarchitecture even supports FM reception with the same receiver architecture.
It is obvious that the number of components of such a design is already lower than for acontemporary high-performance FM tuner. It can be expected that, once high volume isreached, a DAB tuner may be manufactured for a lower cost than a state-of-the-art FMtuner.
Figure 8.9 DAB module based on single chip tuner
332 Digital Audio Broadcasting
![Page 359: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/359.jpg)
8.2.3 Trends and Future Developments
The wireless technology boom of recent years has created some new technologies whichhave – according to ‘Viterbi’s law’ – created some very low cost solutions for wirelesssystems. Technical progress is targeted at the reduction of system cost by reducing thenumber of components and the form factor.
With the introduction of FBAR-filters, a new low-cost competition is entering thefilter market for wireless systems. FBAR-filters are a new option for preselection filters orIF filters with low cost and small form factor [Aigner, 2002].
Two chip implementations, based on an RF frontend chip and a digital basebandprocessor are available for almost every wireless system. Integrated VCOs have beensuccessfully introduced in products and have eliminated external VCO modules. SAWfilters may be either eliminated by zero-IF concepts or replaced by FBAR filters that aresuitable for hybrid integration (‘System in a Package’). Since passive SAW/FBAR filtersprovide the inherent advantage of not requiring an active power supply, they shouldpersist in advanced receiver designs.
For Bluetooth, single chip implementations with both RF transceiver and digitalbaseband processor on the same chip already dominate the marketplace (CSR,Broadcom). This is possible since the minimum sensitivity requirement is only –70dBm for Bluetooth. Nevertheless, single chip solutions for DAB with acceptable perfor-mance are announced.
For goodDAB signal coverage, a DAB home receiver might also work reasonably wellwith a sensitivity of just –70 dBm, but since most people are listening to radio whiledriving to work, such simplified receiver designs will not provide sufficient performancefor mobile reception.
The feasibility of pure CMOS front-ends has been demonstrated for most wirelessapplications, including Bluetooth, GSM, CDMA and WLAN (e.g. IEEE 802.11).Several 5 GHz transceivers for IEEE 802.11a, working at a frequency as high as 5.2GHz have been reported [Su, 2002], [Cho, 2003], [Etz, 2003]. CMOS has become themainstream technology for receiver front-ends up to 5 GHz, in spite of some severedeficiencies compared to SiGe implementations. The economy of scale of large scaleCMOS processes is simply unbeatable. Nowadays, DAB front-ends used in mobilephones are also often based on CMOS. The advantage is the lower power consumption;the disadvantage is a worse linearity in comparison to the BICMOS technology.
The performance requirements for a good FM receiver are a lot higher than for adigital broadcasting receiver. An FM receiver requires a dynamic range of 120 dB whileDAB only requires about 90 dB of dynamic range. According to the general trend of‘Viterbi’s Law’, a DAB receiver in volume production would already outperform a state-of-the-art FM receiver both in perceivable reception quality and in price and perfor-mance. ‘Moore’s law’ predicts that the implementation of the complex digital algorithmswill be possible at about no cost.
Similar developments can be expected for digital TV receivers, since the deploymentsof DVB-T, ISDB-T and ATSC are gaining momentum.
The ultimate challenge of receiver design is the implementation of a system that cancope with the ‘balkanisation of standards’ arising for mobile wireless services, both forthe analogue front-end and for the digital baseband processor. For digital sound
The Receiving Side 333
![Page 360: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/360.jpg)
broadcasting, there are already six different systems in service worldwide (see section1.6), creating a market opportunity for multi-standard receivers. A future receiver for theEuropean market will have to support FM, DAB, DRM and eventually DVB-T in asingle system, integrated with a Bluetooth or WLAN interface to other systems in thehome or in the car. The system concept of ‘software radio’ has been proposed for solvingthe Gordian knot of integration of multiple systems, but progress in this area is limited,mostly by the limited progress in the area of development of high speed, high resolutionADCs.
8.3 Digital Baseband Processing
Digital baseband processing is the generic term for all signal processing steps startingdirectly after digitisation of the IF signal using an ADC until the source coded databecome available after Viterbi decoding. In the case of DAB, baseband processingincludes the following processing steps:
• generation of the complex baseband signal;• OFDM demodulation, possibly combined with compensation for the frequency drift
of the baseband signal;• demodulation of the DQPSK modulated carriers;• time and frequency deinterleaving;• channel decoding using the Viterbi algorithm;• synchronisation of time, frequency and phase.
8.3.1 Digital Front-end
RF front-ends provide two different types of interface for the baseband processingdepending on the overall receiver architecture chosen (see Figure 8.10a, b).
I/Q interface: In this architecture the generation of in-phase (I) and quadrature (Q)components of the complex baseband signal is done in the analogue domain. This typeof interface naturally occurs in zero-IF receiver concepts, which are believed to be a pathfor the high integration of RF front-ends for DAB (see section 8.2.2). A major disadvan-tage of this approach is the quality requirements for amplitude and phase balance overthe required signal bandwidth of 1.536 MHz. In the context of the JESSI project, theseproblems led to the decision to focus on the IF concept.
IF interface: Here, the last IF of the RF front-end is fed into the ADC andfrequency correction is provided via a complex multiplier fed by a numericalcontrolled oscillator (NCO). After shifting the signal towards zero frequency low-pass filters are employed to provide image and adjacent channel suppression.Finally, the signal is decimated towards the sampling rate of Fc = 2.048 MHz.Owing to the digital implementation of this architecture, phase and amplitudeimbalance requirements can easily be solved. In the following section we focus onthe IF interface.
334 Digital Audio Broadcasting
![Page 361: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/361.jpg)
In order to minimise the hardware implementation cost, the sampling rate of the ADCis usually chosen as an integer multiple, N, of the sampling frequency of the complexbaseband signal Fc = 2.048 MHz, that is
FADC ¼ NFc: ð8:2Þ
The actual choice of the ADC sampling frequency is a trade-off between filtering in theanalogue and the digital domains. The minimum possible ADC sampling frequency foran IF concept occurs for N= 2with FADC= 4.096MHz, a choice which can be found inthe early JESSI concepts. An advantage of the IF concept in Figure 8.10a is the fact thatthe IF can freely be chosen according to the needs of the special front-end architecture.Any IF can be supported as long as it is compatible with the ADC chosen regarding inputbandwidth and sampling rate. However, more attractive solutions – regarding hardwareimplementation costs – can be found if certain relations between ADC sampling rate andIF are fulfilled. This will be shown in section 8.6.3.2.
8.3.2 OFDM Demodulation
The demodulation of the OFDM symbols is performed by applying FFTs to calculate thecomplex amplitudes of the carriers of the DAB spectrum. These amplitudes contain the
ADC
NCO
OFDMDemod.
(a)
IF Interface
Oscillator0°/90°
OFDMDemod.
(b)
ADC
N
N
ADC N
I/Q Interface
IF Filter
IF or InputFilter
Figure 8.10 Receiver architectures and interfaces: a) intermediate frequency interface; b) in-phase(I)/quadrature (Q) interface
The Receiving Side 335
![Page 362: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/362.jpg)
information of the modulated data by means of a DQPSK modulation. A completeoverview of OFDM demodulation including the synchronisation function is given inFigure 8.11. According to the various DAB transmission modes I–IV (see section 2.2.1),FFT lengths varying from 256, 512, 1024 and 2048 have to be implemented as indicatedin Table 8.4. This can be realised very efficiently by the well-known Radix-2 FFTalgorithm using a simple control of the FFT memory addressing.
To cope with the possible frequency drift of the baseband signal, an AFC(Automatic Frequency Control) is necessary. One possible realisation is indicatedin Figure 8.10a, where the frequency shift is compensated by means of a complexmixer stage and an NCO. An even more attractive solution, which avoids thecomplex mixer stage, takes advantage of a modified FFT algorithm and isdescribed in section 8.6.3.2.
8.3.3 DQPSK Demodulation
Differential demodulation of the carriers used is usually performed by applying a com-plex multiplication by the stored complex conjugated amplitude of the last OFDM
DigitalFront-end
FFTWindow
FFT
FrameSync.
ModeDetection
DAB ModeRough TimeSynchronisation
DQPSKDemod.
Synchronisation
frequency correction
time correction
Figure 8.11 OFDM demodulation
Table 8.4 DAB transmission modes and FFT length
Mode Carriers FFT Length
I 1536 2048
II 384 512III 192 256IV 768 1024
336 Digital Audio Broadcasting
![Page 363: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/363.jpg)
symbol. Initialisation of this process is done using the phase reference symbol (TFPR, seesection 2.2.2). Figure 8.12a gives an overview of the algorithmic processing steps andindicates typical word widths encountered in hardware implementations.
Figure 8.12b gives an example of a possible mapping of the demodulated amplitudes tosoft decision values suitable as inputs to the Viterbi decoding algorithm, see section 8.3.5.The parameter s is used to adapt the characteristic curve to the actual signal level in thereceiver chain.
8.3.4 Deinterleaving
In order to cope with transmission disturbances, two interleaving mechanisms are used(see sections 2.2.4, 2.2.5):
• Frequency interleaving is a rearrangement of the digital bit-stream over the carriers,eliminating the effects of selective fades. Frequency interleaving operates on oneOFDM symbol only.
• Time interleaving is used to distribute long error bursts in order to increase the channeldecoder’s error-correcting capability.
The frequency deinterleaving can be implemented by addressing the output of the FFTaccording to the interleaver tables.
OFDMDemod.
extractused
carriers
( )* TS
SoftDecision
2 x 10 bits
2 x 10 bits
2 x 4 bits
I,Q I,Q
a)
b)
I,Q
I,Q
7
−7
σ
−σ
Figure 8.12 Differential demodulation: a) block diagram; b) possible soft decision mapping
The Receiving Side 337
![Page 364: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/364.jpg)
The time deinterleaving is a task that requires a substantial amount of memory. Aspresented in Chapter 2, the data of each sub-channel are spread over 16 CIFs, whereaseach CIF represents the information of 24 ms. Thus the interleaving process requires amemory that has 16 times the capacity of the data to be decoded.
As an example, we examine an audio sub-channel with a typical bit rate of 192 kbps.One audio frame of 24 ms duration equals 576 bytes. Since the time deinter-leaving islocated prior to the Viterbi decoder, each information bit is represented by its softdecision value, typically a 4-bit number. Thus, the memory required for deinterleavingthis sub-channel works out at 36864 bytes.
The maximum amount of memory needed for time interleaving and assuming thestorage of 4-bit soft decision output values of DQPSK demodulation works out at 442kbytes or 3.54 Mbits. This amount can be halved by using appropriate in place usage ofthis memory leading to a necessary amount of 221 kbytes or 1.77 Mbits for a full-streamDAB decoder.
8.3.5 Viterbi Decoding
To combat errors due to channel distortions, DAB employs a powerful puncturedconvolutional code (RCPC) with constraint length 7 and mother code of rate ¼ forchannel coding. This mother code is punctured (see section 2.2.3.1) to obtain a widerange of possible code rates, so as to adapt the importance of the information bitsto the channel characteristics. For decoding these codes, the Viterbi algorithm isused [Proakis, 1995], which offers the best performance according to the maximumlikelihood criteria.
The input to the Viterbi decoder can be hard-decided bits, that is ‘0’ or ‘1’, which isreferred to as a hard decision. A better performance (2.6 dB improvement) is achieved ifthe uncertainty of the input is known to the Viterbi decoder, by using intermediate values.The optimum performance for this soft decision is reached when each input value isrepresented by a 16-bit number. However, the degradation is still negligible if the numberof bits is reduced to 4 bits [Proakis, 2008].
The energy dispersal de-scrambling is another task that can easily be assigned to theViterbi decoder module. The BER (Bit Error Ratio) on the channel can be estimated byre-encoding the decoded sequence or a sub-set of the sequence and comparing thissequence with the received bit-stream (see section 7.7.2). This information can be usedas additional reliability information.
8.3.6 Synchronisation
Synchronisation of a DAB receiver is performed in several steps:
1. Coarse time or frame synchronization.2. Coarse frequency synchronisation on carrier accuracy.3. Fine frequency synchronisation on sub-carrier accuracy.4. Fine time synchronisation.
338 Digital Audio Broadcasting
![Page 365: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/365.jpg)
Frame synchronisation. The Null-symbol of the DAB transmission frame provides asimple and robust way for the coarse time synchronisation, which is also called framesynchronisation. The underlying idea is to use a symbol with reduced signal level whichcan be detected by very simple means. In practice a short time power estimation iscalculated which is then used as input to a matched filter. This filter is simply arectangular window with a duration according to the Null-symbol length. Finally athreshold detector indicates the beginning of a DAB frame. It is also possible to calculatean AGC value for optimal scaling inside the following FFT signal path (FFT stages).
Coarse and fine frequency synchronisation. Coarse and fine frequency synchronisationcan be performed using the TFPR symbol (see section 2.2.2) in the frequency domain.This step clearly requires a sufficiently exact coarse time synchronisation. Frequencyoffsets are calculated using the various CAZAC (Constant Amplitude ZeroAutocorrelation) sequences inside the TFPR symbol. These sequences provide a trackingrange of the AFC of about – 32 carriers. This is a sufficiently large value to cope withcheap reference oscillators used in RF front-ends.
Fine time synchronisation. Fine time-synchronisation is performed by calculating thechannel impulse response based on the actually received TFPR symbol and the specifiedTFPR symbol stored in the receiver.
All the described steps are subject to algorithmic improvements and contain variousparameters that reflect the receiver manufacturer’s experience in the field. Thus in allconcepts which are on the market today synchronisation is mostly performed in softwareon a digital signal processor (DSP).
8.4 Audio Decoder
The introduction of DAB+ resulted in the enhancement of the audio decoder imple-mentation. As presented in Chapter 3, two versions of MPEG audio coding schemes aredefined for DAB now. These are the traditional MPEG-1 and MPEG-2 Layer II [IS11172], [IS 13818] and the newMPEG 4HEAAC v2 [IS 14496].With the help of the FIC,the receiver gets knowledge about the currently used audio coding scheme. For DAB use,the first ones have been extended to provide further information for the detection oftransmission errors in those parts of the bit-stream with the highest error sensitivity. Thisis useful for error concealment. The second one, the AAC, already includes all necessaryerror detection mechanisms. But an additional error protection based on Reed-Solomoncoding and virtual interleaving is used to improve the reliability of audio decoding in thereceiver. To support this mechanism a super frame which consists of several audioframes, the so-called access unit, is used.
Furthermore, the dynamic range tool which provides a mechanism to reduce thedecoded audio signal at the receiver and is especially helpful in noisy environments likevehicles was added within DAB for Layer II decoding and is already part of the AACstandard.
For Layer II audio coding section 8.4.1 is relevant, audio coding according to DAB+is described in section 8.4.2 and 8.4.3. For DMB additionally to AAC amodified versioncalled BSAC is standardised which is described in Chapter 9.
The Receiving Side 339
![Page 366: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/366.jpg)
8.4.1 Layer II Audio Decoder Architecture
TheDAB audio decoder is based on anMPEG-1 andMPEG-2 Layer II decoder, but canadditionally calculate and utilise error status information of the audio bit-stream likeISO-CRC and SCF-CRC (see Chapter 3) which is necessary for a powerful error con-cealment. Furthermore, the decoder should be able to decode dynamic range control(DRC) information. However, theDAB specific extensions to theMPEG audio standardare not normative and the receiver manufacturer can even decide not to exploit thisinformation. The block schematic of a DAB audio decoder is depicted in Figure 8.13.
As presented in Chapter 3, an audio frame consists of header and side informationdata, sub-band samples, error detection information and additional data that are inti-mately related to the audio programme, like PAD and X-PAD.
Firstly, the header is decoded and information like bit rate and audio mode areextracted. Based on this information, the table is selected that is necessary to interpretthe side information correctly. The side information contains the quantisation that wasemployed in the encoder and the scaling factor that was used for normalisation for eachsub-band. In MPEG Layer II audio coding, the audio signal is transformed into thefrequency domain and is decomposed into 32 equally spaced sub-bands. The inverseprocess is the synthesis filterbank. The reconstructed 32 sub-band samples in the fre-quency domain are transformed into 32 consecutive samples of one channel in the timedomain, applying a 32-point IMDCT followed by a windowing process. Finally, theaudio signal is transferred to a digital-to-analogue converter (DAC) using the I2Sprotocol (see section 8.5).
The synthesis filter is the most demanding task with respect to the computationaleffort. Consequently, there exist a number of algorithms that offer more efficient solu-tions in terms of multiply and add operations, but the drawback is that the addressingbecomes more complex.
8.4.2 Reed-Solomon Decoding and Virtual Deinterleaving
Before starting the audio decoding process, the receiver has to decode the FIC to decideabout the current used audio coding scheme. According to DAB+Figure 8.14 shows the
Demultiplexerand
Error Detection
InverseQuantisation
SynthesisFilterbank
Side information
Bit-streamBuffer
I2S
Error concealment and DRC
Figure 8.13 Audio decoder block schematic
340 Digital Audio Broadcasting
![Page 367: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/367.jpg)
procedure for extracting the audio frames from the sub-channel bit-streams in thereceiver. Details can be found in [TS 102563].
The bit-stream is provided from the main service channel demultiplexer. The followingReed-Solomon decoder and virtual deinterleaver allow a further reduction of the numberof bit errors (see section 2.2.3.2). The receiver has to collect five successive DAB logicalframes to start the deinterleaving process. It is called a virtual deinterleaver since thebytes are transmitted in the same order than they are generated in the transmitter. Onlythe RS parity bytes of the code are calculated from interleaved data. The mechanism inthe receiver is to write the received bytes in an array of 110 columns before adding theparity bytes in additional 10 columns. The code words are presented as rows. This resultsin a Reed-Solomon RS(120, 110, t=5) shortened code which is derived from the sys-tematic RS(255, 245, t=5) code. The additional redundancy allows the correction of upto five erroneous bytes of the 120 transmitted bytes. For a better understanding of thedecoding of RS codes a short description is given. For further details the interested readeris referred to [Moon, 2005].
The algebraic decoding ofRS codes can be described in the following process sequence:
1. Lengthening of the received code words: By adding zeros the original length of thesystematic RS code should be achieved.
2. Calculation of the syndrome: Multiplication of the received vector with the paritycheck matrix.
3. Determination of the symbol error locations: With the Berlekamp-Massey algorithmor Euclid’s algorithm an error locator polynomial can be calculated. With the Chiensearch algorithm the roots of this polynomial can be found which gives an indicationof where the errors are.
4. Finding the error values: This involves solving equations simultaneously which istypically done with the Forney algorithm.
The complexity of the Reed-Solomon error correction should not be underestimated.But suitable hardware and software solutions for consumer products are availablenowadays.
In the next step, the audio parameters from the audio super frame can be extractedbefore individual audio frames can be forwarded to the MPEG 4 audio decoder. Theaudio parameters are protected with an additional Fire code. Only when this code showsan error free bit sequence can the audio super frame be decoded. The audio parametersprovide the configuration of the audio decoder as sampling rate or the use of MPEGsurround.
Reed-Solomon Decoderand
Virtual Deinterleaver
Unpack audio super frameand
Audio parameter extraction
MPEG 4 AAC HE v2Decoder
Bit-stream ofchannel
demultiplexerPCM audio
samples
Figure 8.14 Audio decoding for DAB+
The Receiving Side 341
![Page 368: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/368.jpg)
8.4.3 AAC Audio Decoder Architecture
The DAB+ audio decoder is based on the MPEG-4 High Efficiency AAC v2 profile,level 2 [IS 14496] often abbreviated as HE AAC v2. In this section only a roughoverview about this audio coding mechanism is given to understand the behaviour ofthe audio decoder in the receiver, details about audio coding can be found inChapter 3. HE AAC v2 combines three MPEG technologies: Advanced AudioCoding (AAC), Spectral Band Replication (SBR) and Parametric Stereo (PS). TheAAC is the core codec which provides transparent audio quality at a typical bit rate of128 kbps [Meltzer, 2006]. For lower bit rates the enhancement tools SBR and PSsupport the achievement of a good audio quality. When using SBR, the original AACaudio codec considers only a small audio bandwidth. The signal components at higherfrequencies with less psychoacoustic impact are harmonically repeated from the lowerfrequency range. So for higher frequencies only the spectral envelope of the originalinput signal has to be transmitted to allow the reconstruction of the signal at thereceiver side. When using PS in addition only a mono downmix of the stereo signal istransmitted together with side information containing stereo image parameters. TheHE AAC v2 decoder is depicted in Figure 8.15.
The bit-stream at the input of the decoder is split into the AAC decoder part and, ifexistent, into the side information for SBR and PS. For the AAC decoder two config-urations exist. Firstly, without the use of SBR and PS the AAC decoder directly producesthe time domain signal of the sample-rate fs marked with a) in Fig. 8.15. Or second, theAAC decoder only outputs the low-band signal at a sample-rate of fs/2 indicated by b).The following 32-band QuadratureMirror Filter (QMF) bank transforms the signal intothe QMF domain to allow the reconstruction of the high-band in the SBR block. The lowand the high band are added to get the representation.When using PS, the stereo signal isgenerated in the QMF domain with the help of the PS side information. In Fig. 8.15, thisis marked with c) in contrary to d) where PS is omitted. The time domain output signal atsample rate fs is generated in a last step by a 64-band QMF synthesis bank.
Bit-streambuffer
AACdecoder
QMF bank(32-bandanalysis)
SBRprocessing
Addition oflow-band and
high-band
Parametricstereogeneration
QMF bank(64-bandsynthesis)
PCMaudio
samples
a)
b) c)
d)
SBR side information
PS side information
Figure 8.15 Block diagram of HE AAC v2 decoder
342 Digital Audio Broadcasting
![Page 369: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/369.jpg)
The complexity in the receiver for audio decoding is significantly increased in compar-ison to Layer II decoding. A rough estimation of the complexity can be found in[IS 14496]. For the processing power a number of 9MOPS (million operations per second)is given, the memory usage corresponds to about 10 kwords. These numbers do not poseany greater challenge to state-of-the-art consumer technology. Additional complexity hasto be considered for multichannel decoding according to MPEG Surround (MPS), stan-dardised in MPEG-D, Part-1 [IS 23003]. The decoder shall support either level 2 or level 3of the Baseline MPEG Surround profile. That means a 5.1 channel configuration forloudspeaker presentation can be achieved. The MPEG Surround decoder has to distin-guish between two different modes, the normal mode works with a downmixed signal ofthe original multichannel signal and associated spatial parameters and the enhancedmatrix mode enables a multi-channel upmix from a stereo signal where the spatialsynthesis is derived from an analysis of the received signal only. Furthermore it has tobe mentioned that for the receiver the two features MPS and PS are mutually exclusive.That means that to the parametric stereo block in Figure 8.15 an optional MPEGsurround block can be added, but only one of them can be active for a received signal.
8.4.4 Normative Requirements
Conformance testing for DAB Audio [TS 101 757] defines the normative requirements fora DAB audio decoder which is based on the procedures defined byMPEG as Part 4 of [IS11172] and [IS 13818] respectively. [TS 101 757] defines a test procedure and associated bit-streams that can be used to verify whether an audio decoder meets the requirementsdefined in [EN 300401]. The basic principle of the test is depicted in Figure 8.16.
For calculation of the conformance criteria, the definition of the difference of the tworelated output samples (d(n)) and their error energy (RMS) are given below:
d nð Þ ¼ xref nð Þ � xtest nð Þ ð8:3Þ
RMS ¼ffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffi1
N�XN�1
n¼0
dðnÞ2
sð8:4Þ
bit-stream
referenceoutput
differencedata
Decoderunder test
Xtest(n)
Xref(n)
d(n)
Figure 8.16 Audio conformance test procedure
The Receiving Side 343
![Page 370: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/370.jpg)
The decoder under test decodes the test bit-stream. The output (xtest) is digitally recordedand compared on a sample-by-sample basis with the reference output (xref). Two certi-ficates for a DAB audio decoder are defined:
1. ‘full accuracy DAB audio decoder’, which is more strict;2. ‘DAB audio decoder’, which is more relaxed.
To be called a ‘full accuracy DAB audio decoder’, the average error energy as defined inequation (8.4) must be below 2�15=
ffiffiffiffi12p
and in addition the first 14 bits of each outputsamplemust be bit exact. If the average error energy does not exceed 2�11=
ffiffiffiffi12p
, the criteriafor a ‘limited accuracy DAB audio decoder’ are fulfilled.
8.5 Interfaces
In principle, DAB receivers can be equipped with two types of interface: those that carrydata to or from DAB receivers and those that carry control information.
Table 8.5 Overview of interfaces to DAB receivers
Interface Area Description
RDI (Receiver
Data Interface)
Data and
audio
This interface is defined in [EN 50255]. It is the standard interface
of DAB receivers that can transmit the content of the completeDAB ensemble of up to 1.8 Mbit/s.
I2S (Inter ICSound)
Audio Audio interface for digital audio data in the time domain (PCMformat). It is used typically as the interface to the audio DAC.
AES/EBU S-P/
DIF
Audio Audio interface for PCM coded data. AES/EBU is the
professional format, whereas S-P/DIF is the consumer format.Physically, both protocols are based on [IEC 60958]. Thedifference is in the interpretation of some of the ‘‘side information
bits’’. For further details we refer the reader to [IEC 60958] and[Watkinson, 2000].
IEC 61937 Audio This interface allows compressed audio to be carried over aninterface, that is physically identical to [ISO/IEC 60958]. This
allows for example a multichannel audio programme receivedover DAB to be feed to an external multichannel decoder. Forfurther details we refer the reader to [IEC 61937].
I2C (Inter IC) Front-endcontrol
This is a typical three wire interface to control the analoguefront-end of the DAB receiver. The upper limit for the data rate isabout 400 kbit/s.
SPI Front-end/data
An alternative to I2C allowing higher data rates. It can inaddition be used to transfer any data (like data services) to any
external device.
MOST General In-car bus system. One application is to link the DAB receiver tothe front unit that controls the receiver.
IEEE 1394(FireWire)
General Alternative bus system to MOST that allows higher data rates.IEEE 1394 is even suitable for uncompressed video distribution.
344 Digital Audio Broadcasting
![Page 371: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/371.jpg)
Data interfaces. The RDI (Receiver Data Interface) [EN 50255] is a data interface whichwas specifically developed for DAB. It is suitable for connecting an external data decoderto a DAB receiver. It carries the full DAB stream of up to 1.8 Mbps and is thus useful forhigh data-rate applications, like video broadcast through the DAB system. Nowadays,this interface is less important, since a PC-card receiver transfers data through the PC bussystem, like PCI, and for car radios there are other specific solutions, likeMedia OrientedSystems Transport (MOST).
Control interfaces. The I2C (Inter IC) interface belongs to the second category. It is usedto exchange control information, such as the frequency, that the front-end should tune in.The bit rate of this I2C is up to 400 kbps. In this context, this interface is internal to theDAB receiver and connects the digital part or a micro-controller with the analoguefront-end.
Control interfaces are also used to control a black-box-type DAB receiver (seesection 8.7) from the car radio. A common DAB command set for receivers(DCSR) was standardised for this purpose [EN 50320]. It is intended for the useon different physical bus systems. An API to control a DAB receiver box throughthe car bus systems MOST (Media Oriented Systems Transport) is also defined inthe MOST function catalogue.
Table 8.5 provides an overview of the most important interfaces of DAB componentsand receivers.
8.6 Integrated Circuits for DAB
Chip-sets are the building blocks for the various kinds of DAB receivers. From the verybeginning of DAB standardisation in 1986 it was clear that the delivery of key compo-nents for receivers, that is highly integrated circuits – ICs, is substantial for the success ofthe new standard. Today the integration is at a level where a complete DAB broadcastreceiver can be realised even in combination with other systems using two highlyintegrated circuits (RF chip and baseband chip) or even using only one chip.Nowadays, for baseband processing also a DSP (Digital Signal Processor) instead ofan ASIC (Application Specific Integrated Circuit) is a convenient solution to reach moreflexibility.
Today, many highly integrated solutions from different chip-set manufacturersare available. In the following, we will give an overview before we present twodifferent concepts for DAB chip-sets. The first one is the result of a joint effort ofthe European semiconductor and receiver industry. The second one is an examplefor a more modern implementation in this sector and differs in many respects fromthe first concept.
8.6.1 Overview of DAB Chip-sets
With the increasing number of DAB chip-set manufacturers the variety of differentreceiving solutions has also risen. Three trends can be recognised. Firstly, multi-standard RF and baseband ICs covering several broadcast systems were developed.
The Receiving Side 345
![Page 372: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/372.jpg)
Relevant systems are the two analogue ones AM and FM as well as the digital onesDRM and DVB-H/T. Additionally, Wi-Fi to enable internet radio can be found insome implementations. These solutions help to serve the world market with itsdifferent standards. The second trend is a dramatic reduction in power consump-tion. It can be explained by the need to integrate DAB/DMB into mobile phones toenable mobile TV. The reduction of power consumption can be achieved by thetechnical progress in the semi-conductor world. Also solutions where the RF-Tunerand the baseband processing are implemented in one package are available. Thethird trend is an improved reception performance. It is driven by the automotivedomain with its more difficult reception environment. Integrated multistandard RF-Tuners and low power chip-sets behave worse in comparison to DAB dedicatedsolutions with higher power consumption. Since most car manufacturers concen-trate on high performance systems, the traditional partitioning of RF and basebandhas its right to exist. To allow the support of several broadcast systems dedicatedICs are used.
Many silicon vendors from different countries entered the market. Some provide onlyRF or baseband ICs, but most offer both. Market relevant solutions are provided by thecompanies Frontier Silicon, Analog Device, Texas Instruments, Atmel, NXP, Infineon,Future Waves, Siano, Media Phy and Maxscend Technologies. In addition, there aremany companies using these ICs to build small modules which can be easily used by thereceiver manufacturer.
8.6.2 History of DAB Chip-sets – the JESSI Programme
The European JESSI (Joint European Submicron Silicon Initiative) programme was asuitable umbrella for the necessary pre-competitive activities of the European semicon-ductor and equipment industry. Inside JESSI the AE-14 programme was one of theapplication-specific programmes and was started in 1991 at a time when the final DABspecification, now officially known as [EN 300401], was not available. The systemspecification and verification, however, had already been done during the Eureka 147project. Most of the partners active in the Eureka 147 project also played an importantrole during the JESSI AE-14 project. The overlap of the two groups ensured that AE-14had early access to the DAB system specification and an extremely thorough under-standing of the DAB system.
The JESSI AE-89 DDB (Digital Data Broadcasting) project was launched in 1995 inorder to support the introduction of data services into DAB by delivering an IC at a veryearly stage. In addition to this, the combination of DAB and FM and the furtherintegration of DAB have been a focus of this project.
The following paragraphs give an overview of the final silicon delivered by AE-89which was the basis of numerous receiver designs in the past few years.
8.6.2.1 Analogue IC – JESSI AE-89
As mentioned above, most DAB tuners are based on the ‘JESSI concept’ as shown inFigure 8.7. In the first implementation, four ICs were required. The signal strips for
346 Digital Audio Broadcasting
![Page 373: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/373.jpg)
L-band and Band III were each integrated in a special IC, and both the L-band down-converter and the Band III signal strip required a separate PLL IC that had to becompliant with the Eureka 147 system requirements. In general, an external low noisefront-end transistor was required for both bands. The formerly popular TEMIC chip-setpresented in Table 8.6 relied on this concept.
8.6.2.2 Digital IC – JESSI AE-89
The final generation of AE-89 DAB ICs achieved the following technical features:
• decoding capabilities for the full DAB bit-stream (up to 1.7 Mbps);• digital I/Q generation and filter for adjacent channel selectivity;• digital AFC;• combined analogue and digital AGC;• RDI capable of transporting up to 1.7 Mbps.
For realisation of the DAB channel decoder two architectures have been produced byTEMIC and Philips. These architectures are the result of trading flexibility against levelof integration. Architecture I, developed by Philips, is shown in Figure 8.17 and offers ahigh level of integration.
Table 8.6 JESSI analogue IC chip-set, by TEMIC
U2730 B L-band downconverterU2750 B Band-III- tuner
ADC
Digital Filter&
I/QGeneration
FFT
Synchron-isation
DifferentialDemod. &
MetricGeneration
Time&Freq.Deinter-leaver
ViterbiDecoder
SRAM256k×8
μC AudioDecoder
L3 I2S
AFC &AGC RDI
AGC
DAB CHIC
DAB3
Figure 8.17 JESSI AE-89 DAB Channel Decoder Architecture I – Philips
The Receiving Side 347
![Page 374: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/374.jpg)
The synchronisation functions are completely integrated and realised mainly in hard-ware. Closing of the synchronisation loops, however, is under the control of an externalmicrocontroller (mC). As external components only a low-cost mC and 2-Mbit SRAMareneeded.
Architecture II, developed by TEMIC and depicted in Figure 8.18, offers a lower levelof integration, but has the advantage of offering more flexibility for realising differentsynchronisation strategies, due to the fact that the synchronisation is done in software onan external DSP.
These chip-sets have been the basis for numerous receiver designs and have beenavailable as prototypes since the end of 1996.
8.6.3 D-FIRE Chip-set (Bosch)
The following paragraphs give a detailed description of the Bosch D-FIRE chip-set[Bolle, 1998], [Clawin, 1998], [Clawin, 2000], which differs in many aspects from thechip-sets which are based on the JESSI concept (see sections 8.6.2.1 and 8.6.2.2). Thisconcept had some properties which hindered a low-cost, low-power and small-size DABreceiver. These properties are:
• The analogue VCXO required for the synchronisation is a cost-intensive component,which furthermore requires a DAC. In addition, it is well known that the VCXOcontrol signal itself is vulnerable to interference.
• The use of tracking filters for interferer and image suppression in Band III is amajor cost-producing factor: bulky, high-Q, tuneable inductors have to be usedin connection with varactor diodes, which have to be driven by a control voltagegenerated by DACs.
• Manual or automated tuning has to be employed during manufacture of the DABreceiver.
A/DConverter
FFT
DSPSynchron-
isation
VIDECFAFOURIT
Digital Filter&
I/QGeneration
DifferentialDemod. &
MetricGeneration
Time&Freq.Deinter-leaver
ViterbiDecoder
SRAM256kx8
μC AudioDecoder
L3
AFC &AGC
RDI
DAB3
I2S
Figure 8.18 JESSI AE-89 DAB Channel Decoder Architecture II – TEMIC
348 Digital Audio Broadcasting
![Page 375: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/375.jpg)
• Supply voltages in excess of 5 V have to be used.• A large number of VCOs are required, for example four VCOs for a receiver covering
Band III and L-band.• The L-band is sensitive to interferers at frequencies up to 300 MHz, which are
ubiquitous from digital equipment (on-board DSP, PCs, TV stations).
Derived from this the following major goals for the development of this DABreceiver engine (D-FIRE: DAB–Fully Integrated Receiver Engine) chip-set wereidentified as:
• Use of supply voltages <5 V for the analogue part and 3.3 V for the digital part.• Design of an adjustment-free receiver.• Full digital synchronisation (time, frequency and phase).• Minimisation of the total number of VCOs.• Low power consumption in comparison to state-of-the-art receiver concepts.
8.6.3.1 Front-End Chip-Set
The commonly used receiver for DAB signals employs a Band III (174–239 MHz)heterodyne architecture, preceded by a 1.5 GHz to 210 MHz block converter forL-band (1452–1492 MHz) reception. This architecture requires tuneable pre-selectionfilters to meet the stringent selectivity and dynamic range requirements [EN 50248].
The alternative architecture used in the D-FIRE concept exploits a high level ofintegration by using two separate receiver stages for the two bands, with one PLLoperating both mixers to the common first IF, on a single RF chip (Figure 8.19). The
1
2
PLL
SAW
SAW
PLL
L-band
Band III
VCO 1
2. IF Filter30.72 MHz
24.576 MHzXO
1. IF Filter919 MHz
RF Chip
IF Chip
ext. PLL
Diplexer
VCO 22:1Divider
Figure 8.19 Front-end architecture of the D-FIRE chip-set
The Receiving Side 349
![Page 376: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/376.jpg)
common IF is chosen between the two receiving bands (Band III and L-band). Thischoice allows the elimination of all tracking filters in Band III due to the underlyingupconversion principle.
This separation allows independent optimisation of receiver designs for noise andintermodulation (IM) performance. A second PLL then performs the downconversionto the second IF of 30.72MHzwhich is finally sub-sampled by the ADC using a samplingfrequency of 24.576 MHz.
A next development with comparable architecture can be found in the newest receivergeneration. It uses an integrated filter for the first IF to further reduce the number ofcomponents. In addition, the ADC and the digital conversion block were included on thesame piece of silicon to enable the easy combination with digital ICs without ADC. Sothis new front-end IC became a milestone, it is the first one with integrated ADC forDAB.
8.6.3.2 Digital IC (D-FIRE)
The digital IC (D-FIRE) has still, despite its long availability, a modern architecture. Themain difference to its near successor IC is the missing support of DAB+.The architecture consists of two main parts (see block diagram in Figure 8.20):
• The signal path, which provides all the DAB functions for signal processing anddecoding.
• A control block consisting of an OAK DSP core, a MIPS RISC core, 42 kbytes fastinternal RAM for the processors and a cross-connector which realises flexible linksbetween all components.
DigitalFront-end
AFC-FFTDiff. Dem.
Time De-interleaver
ViterbiDecoder
OakDSP 1660
ADC
Mini-RiscTR4101
Memory Interface
MPEGAudio
ARDI
TDISRAM
SR
AM
SR
AM
I2S
I2C
RDI
Cross-Connector
Figure 8.20 Architecture of the digital part (D-FIRE) of the DAB receiver system
350 Digital Audio Broadcasting
![Page 377: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/377.jpg)
The digital front-end. In contrast to the generic front-end architecture of Figure 8.10a, theD-FIRE digital front-end employs a close relation between ADC sampling rate and IF inorder to drastically reduce the hardware implementation effort. The basic idea is to use acomplex recursive band-pass filter and subsequent decimation to generate the complexbaseband signal and to provide simultaneously adjacent channel suppression. Very littlehardware implementation effort is necessary if the following relation holds:
FIF ¼FADC
4:ð1þ 2mÞ for m ¼ 1; 2; . . . ð8:5Þ
For D-FIRE the choice m=2 leads to an FIF of 30.72 MHz which is sub-sampled bythe ADCworking at a sampling rate of FADC= 24.576MHz, cf. Figure 8.21. Besides thechosen IF the front-end is of course able to cope with IFs of 6.144MHz, 18.432MHz and43.008 MHz respectively. Care, however, has to be taken in the RF front-end to providesufficient filtering at these unintentional IFs.
Because of the differential modulation scheme chosen in DAB it is possible to employrecursive filters (Infinite Impulse Response – IIR) in order to meet the demandingadjacent channel suppression requirements imposed by [EN 50248]. In order to copewith the stability requirements encountered in recursive filtering the well-known wavedigital filter (WDF) concept [Fettweis, 1986] has been employed. In particular, for thefirst filter a complex polyphase filter has been chosen, which can be very efficientlycombined with the subsequent decimation by a factor of 12.
After decimation, an additional low-pass filter is necessary to suppress the remaininginterferences. For this filter a third-order elliptical low-pass WDF has been designed.Figure 8.22 shows the effective signal transfer function of the digital front-end. Thedesign goal of this filter architecture has been to provide a minimum attenuation topossible adjacent DAB channels of at least 48 dB. It can easily be observed in Figure 8.22that this goal has been achieved.
8-bitADC
12
third orderelliptical low-passfilter (WDF)
complex polyphaseband-pass filter(WDF)
FADC = 24.576 MHzENOB = 7 bits
8 bit 10 bitFIF = 30.72 MHz
(6.144 MHz,18.432 MHz,43.008 MHz ...)
( )2 N Threshold
Fsync
ModeNull Symbol Detector
Figure 8.21 D-FIRE digital front-end
The Receiving Side 351
![Page 378: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/378.jpg)
OFDM demodulation. The demodulation of the OFDM symbols is performed by apply-ing FFTs to calculate the complex carriers of the DAB spectrum. These carriers containthe information of the modulated data. A Radix-2 FFT with decimation in time isimplemented so that the specified DAB transmission modes can be realised by a simplecontrol of the FFT addressing. To cope with the frequency drift of the baseband signal,an AFC (Automatic Frequency Control) is necessary for which a new approach has beenchosen. Let x(k) be the complex output signal of the digital front-end, N the FFT lengthand r be the normalised frequency deviation, that is the measured frequency deviationnormalised to the sub-carrier distance. In this case the following frequency correction hasto provide the corrected signal:
yðkÞ ¼ xðkÞe�j2pk�=N ð8:6Þ
The Fourier transform Y of y is given by
Yð1Þ ¼XN�1
k¼0
yðkÞe�j2pkl=N ¼XN�1
k¼0
xðkÞe�j2pk ð lþ� Þ =N ð8:7Þ
It is important to note that Y(l) is now calculated by a modified discrete Fourier trans-form, where the running index l is replaced by r+ l. The interesting point is that now fastalgorithms can be derived for this modification which leads to a hardware architecturewhich is a slight modification of the well-known Radix 2 decimation in time FFTarchitecture [Bolle, 1997].
−10−80
−70
−60
−50
−40
−30
−20
−10
0
−5 0 5 10
ST
F [d
B]
Frequency [MHz]
Figure 8.22 Effective transfer function of the D-FIRE digital front-end
352 Digital Audio Broadcasting
![Page 379: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/379.jpg)
The baseband energy, calculated by the Null-symbol detector (Figure 8.22), is used foroptimal scaling of the fixed-point FFT implementation and the following signal path.
Demodulation (Figure 8.23). In contrast to the approach taken by JESSI (see section8.6.2.2) the DQPSK demodulation is performed by calculating the polar representation(r, �) of the carriers using the CORDIC algorithm, which can be implemented veryeffectively in hardware compared to the costly implementation of the complex multiplierwhich is needed in the traditional approach. In doing so, the differential phases of twoDABsymbols can easily be calculated by a subtraction of the carrier phases. In addition thephase representation allows additional functionalities such as the removal of a constantphase error which is introduced by the phase noise contribution of the RF front-endoscillators. To determine the metrics for the following soft-decision channel Viterbi deco-der, the actual amplitude and the difference between two following phases is used.
Deinterleaving. The time deinterleaver is implemented in combination with a subchanneldemultiplexer. Only DAB capacity units with a size of 64 bits, belonging to selected sub-channels, are deinterleaved and transferred to the Viterbi decoder. This procedurepermits a multiplex reconfiguration to be followed for all selected sub-channels in theensemble simultaneously without any interruption or disturbance.
Viterbi decoding. To combat errors due to channel distortions, DAB employs a convolu-tional code with constraint length 7 for channel coding. It can be punctured to obtain awide range of possible code rates so as to adapt the importance of the information bits tothe channel characteristics. Decoding is done using the Viterbi algorithm (tracebackversion). The Viterbi decoder is able to decode the full data rate of 1.8 Mbps which is themaximum data rate specified by ETSI. All specified code rates between 8/9 and 1/4 aresupported, that is all equal error protection (EEP) and unequal error protection (UEP)profiles can be decoded. The decoder operates with 4-bit soft-decisionmetrics and closelyapproaches the theoretical coding gain. Furthermore, the Viterbi module includes thecalculation of the CRC for the FIC data, an energy dispersal descrambler and a re-encoding unit for estimating the BER on the channel.
Audio decoder. The architecture of the implemented audio decoder is depicted inFigure 8.24. Three major blocks can be identified: demultiplexing, reconstruction of(frequency domain) sub-band samples and synthesis filtering. The latter blocks sharean MAC (Multiply Accumulate) unit that allows one MAC operation per cycle.
8 BitADC
FFTWindow
AFC-FFT
Synchronisation (DSP)
CORDIC
timesynchronisation
frequencysynchronisation TS
r
θ
QAMDemapping
I
Q
commonphase errorcorrection
DigitalFront-end
Fsync
Figure 8.23 D-FIRE OFDM demodulation
The Receiving Side 353
![Page 380: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/380.jpg)
A RAM is located before the decoder that stores the MPEG coded audio data.This buffer handles one part of the error concealment strategy (see section 3.7.2): inthe case when the audio frame is not decodable owing to transmission errors theaudio decoder requests another audio frame so the previously decoded frame isrepeated. The communication between buffer and audio decoder is realised by anintelligent and flexible interface. With this buffer concept it is possible to decodeancillary data information carried in the DAB specific data field in the audio frame.Flexible concealment is guaranteed since the sub-band reconstruction process can beinfluenced on a sub-band basis, that is the audio signal can be shaped in thefrequency domain prior to transformation into the time domain. Using this mechan-ism, the audio decoder can be configured in such a way that very annoying ‘birdies’caused by an error-prone environment are avoided while the reproduction of theaudio signal is maintained.
The audio decoder is able to use directly the information for the reduction of dynamicrange which is part of the coded audio data. These data are applied during the decodingprocess in the frequency domain so the effect of the DRC process is smoothed by thefilterbank. The synthesis filter is the most demanding task with respect to computationaleffort. The reconstructed sub-band samples in the frequency domain are transformedinto the time domain by applying a 32-point IMDCT (Inverse Modified Discrete CosineTransformation) followed by a windowing process.
8.7 Receiver Overview
DAB receivers have been available for more than one decade. In the last years, the varietyof different receivers increased in order to serve the needs of the customer. Also the pricesdropped so that DAB reached the status of a household product used at home, in the carand on the way to work. The miniaturisation and lower power consumption was animportant step to integrate DAB into a variety of technical products.
Demultiplexerand
Error Detection
Control Register
InverseQuantisation
SynthesisFilterbank
Bit-streamInformation &Error Status
DynamicRangeControl
FrameBuffer
Configuration Register
ErrorConcealment
MAC
I2S DataBuffer
Figure 8.24 Audio decoder block schematic
354 Digital Audio Broadcasting
![Page 381: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/381.jpg)
8.7.1 History of Receiver Development
The first commercially available receivers were presented at the Consumer Electronicstrade fair Internationale Funkausstellung (IFA) in Berlin in 1995. These so-called fourth-generation receivers, consisted of a car radio that provides a tuner for the traditionalanalogue broadcast systems (FM and AM) and the control interface to a black box,which facilitates the complete DAB specific processing. An antenna capable of copingwith both DAB frequency bands completed these receivers. They were the first DABreceivers to decode an arbitrary multiplex configuration and some were even able tofollow a multiplex reconfiguration. These first car receivers, manufactured by Bosch/Blaupunkt, Grundig and later by Pioneer, were used for DAB pilot projects in Germanyand other European countries.
Two years later, at the IFA in 1997 about 10 manufacturers presented DAB car radiosand even the first tuners fitting a 1-DIN slot have been displayed.
At the IFA in 1999 and on other occasions, the first HiFi tuners and PC-card-basedreceivers were presented.
8.7.2 Receiver Categories
Today, DAB receivers for a wide range of markets are available including home recei-vers, car radios, portable receivers, PC receivers and professional devices. While somemanufacturers have developed DAB-only products, others have developed combinedDAB/FM/AM/CD/MP3 units. Also combinations with other digital broadcast systemsas DVB-H/T and DRM are available. An up-to-date overview of DAB products can befound on several Internet web-sites, for example [www.worlddmb.org], [www.digitalra-dio.de], [www.digitalradionw.com] and [www.dab-digitalradio.ch].
Home receivers. The ‘at home products’ provide the biggest plurality of different receivertypes and they are the most successful category nowadays. Home radios on the marketinclude hi-fi tuners, kitchen radios, clock radios, portable stereos (‘boomboxes’) andmidi-systems. Many of these products look like traditional radios, but also provide newfeatures such as pause/rewind to stand out from the crowd of competitor products.
Car radios. Twomain categories for car radios prevail on the market. Firstly, complete all-in-one digital radios combined with AM/FM. These are also called 1-DIN tuners becausethe single housing fits into the standard mounting frame. The second category consists ofcar radioswith an extra blackbox.Theblack box canbe stored in the boot, under the seat orbehind the dashboard. Both concepts are of interest for car manufacturers that are offeringstandard fittings for cars as well as products for retailers. In addition, HMI includingDABreceivers which are mounted on the dashboard and can be connected to the car radioentered the market. These devices are also available with bigger displays to combine theDAB functionality with navigation or TV-like services. An example is shown in Fig. 8.25.
Portable receivers. Real hand-held receivers and accessories are now a reality. These arebased on smaller, low-powered chips to enable the creation of truly portable DAB radios.The plurality of products is increasing fast. Some are very small and optimised for musiclistening on the way. Others are combined with bigger displays to allow presentation of
The Receiving Side 355
![Page 382: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/382.jpg)
data services and videos. Other features such as the different audio compression algo-rithms MP3, AAC, WMA and broadcast systems FM, AM, DRM or picture and videoviewing with JPEG and MPEG are often included. A very successful combination is themobile phone withDMB/DAB functionality. A detailed description for this can be foundin Chapter 9.
PC products. DAB receivers plugged to a computer allow listening to radio and havingaccess to data services while working at the computer. PC products rely on USB asinterface between receiver and computer. The flexibility of this category is huge sincesoftware updates for new data services are simple to obtain. In addition, first manufac-turers produced DAB-enabled notebooks with the advantage of a very easy use.
Reference receivers. Reference receivers are an indispensable necessity for networkmonitoring and coverage evaluation (see section 7.7). Information such as signalstrength, BER or channel impulse response is displayed by such receivers.
8.7.3 Receiver Market
Several market research institutions cope with the prognosis of the receiver market. Thetrend is unambiguous, the sales numbers are increasing distinctly. This tendency can alsobe seen in the figures from the last five years shown in Figure 8.26. Apart from the fourmillion DMB receivers that have been sold in Korea between the commercial launch ofT-DMB in November 2005 and mid 2007, more than five million DAB radios have beensold in Europe in the last years. Most of these DAB radios can be found in UK house-holds, but other countries started to catch up.
Beside the improved programme choice, the variety of products and lower prices arethe reasons for the increasing market. DAB/DMB receivers are available in a wide rangeof prices, from a kitchen radio which costs less than 50 Euros to a hifi set for hundreds of
Figure 8.25 Newest generation DAB Car receiver VW RCD 510 DAB (Bosch)
356 Digital Audio Broadcasting
![Page 383: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/383.jpg)
Euros. The choice of different models also became impressive. From the source[www.dab-digitalradio.ch] one can extract that in 2008 more than 250 manufacturersoffered almost 900 different receiver products worldwide as depicted in Figure 8.27.
8.8 Receiver Features
8.8.1 General Aspects
The possibilities of data provision with digital broadcast systems are almost infinite. As aconsequence, the number of different types of data services increased over the years. But
0
W01
/200
7
W43
/ 200
6
W43
/ 200
6
W33
/ 200
6
W23
/ 200
6
W13
/ 200
6
W3 /2
006
W45
/ 200
5
W35
/ 200
5
W25
/ 200
5
W15
/ 200
5
W47
/ 200
4
W37
/ 200
4
W27
/ 200
4
W5 /2
005
W11
/ 200
7
W21
/ 200
7
W31
/ 200
7
W41
/ 200
7
W51
/ 200
7
W11
/ 200
8
W21
/ 200
8
W31
/ 200
8
W41
/ 200
8
50
100
150
200
250
300
Figure 8.26 DAB product manufacturers worldwide. Reproduced by permission of Swiss
Satellite Radio
0
W27
/200
4
W37
/ 200
4
W47
/ 200
4
W5 /2
004
W15
/ 200
5
W25
/ 200
5
W35
/ 200
5
W45
/ 200
5
W3 /2
006
W13
/ 200
6
W23
/ 200
6
W33
/ 200
6
W43
/ 200
6
W01
/ 200
7
W11
/ 200
7
W21
/ 200
7
W31
/ 200
7
W41
/ 200
7
W51
/ 200
7
W11
/ 200
8
W21
/ 200
8
W31
/ 200
8
W41
/ 200
8
200
400
600
800
1000
1200
Figure 8.27 DAB receiver products worldwide. Reproduced by permission of Swiss Satellite Radio
The Receiving Side 357
![Page 384: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/384.jpg)
this also showed that customers do not accept all services, especially when a user friendlyoperation is not guaranteed.
The different receiver categories concentrate on different services and features. Thebenefit of the features can be derived from the use of the receivers. In the car for example,traffic information is of particular interest. Traffic information is necessary to ensure thesafety of the car driver. So control instruments of the receiver which reduce the driver’sattention to the traffic (for instance when the driver has to look at the receiver whilesetting it) must be minimised and other control instruments such as voice recognitionmust become more important.
Often portable receivers only have very small displays, so that the possibilities to presentdata services also are limited. In contrast, PC-based receivers have larger displays whichmuch enhance possibilities. Receiver manufacturers have to decide carefully about thefeatures their receivers should support considering the HMI (HumanMachine Interface).
To obtain a better overview, a classification into three feature categories is appro-priate. The first category needs a signalling in the DAB data stream to allow the use inthe receiver. Examples of this are programme type, announcements and servicefollowing as described below. Often the FIC is used to transport the signalling bits.The features of the second category are independent of the DAB standard. But theimplementation became much easier with the use of digital signal processing in thereceiver which in turn was forced by the use of a digital transmission system. A typicalexample is the pause/rewind feature. The third feature category consists of the wholebunch of different data services. The utilisation is only possible if the broadcastersdecide to spend some data capacity for these services. Examples are TOPNews,Journaline and electronic programme guide (EPG).
8.8.2 Examples of Receiver Features
8.8.2.1 Programme Type (PTy)
The assignment of one or more programme types (PTys) by the service providerallows selection of a programme, matching the interests of the user (see also section2.5.5.2). PTy is a feature that is known from RDS, but for DAB use the capabilitieshave been largely extended. DAB offers the possibility to assign more than one PTyto a programme. Another novelty is dynamic PTy codes that can be used todescribe, for example, the song that is currently on-air, whereas the static PTyreflects the flavour of the service itself. Therefore, the receiver HMI has in principleto offer three modes:
Service search. Search for services with a specific flavour. That is, the static PTy of theservice matches the user’s choice.
Programme search. Search for services with a specific programme. That is, the dynamicPTy of the service matches the user’s choice.
Background scan (watch mode). In principle, one of the above, when there is no serviceavailable that offers the programme, according to the user’s choice. The programmes are
358 Digital Audio Broadcasting
![Page 385: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/385.jpg)
watched and if a programme according to the scan-list is turned on, the receiver auto-matically switches to that programme.
8.8.2.2 Announcements
Announcements (see also section 2.5.6) in DAB are similar to traffic announcements(TAs) in RDS, although offering a wider range of categories such as news, weatherinformation, events, etc. In total, 32 different categories have been defined.Announcements are an interesting feature for all types of receivers. Traffic announcementsare a must for car receivers which furthermore are simple to use with only one button.
8.8.2.3 Alternative Frequencies and Service Following
DAB provides frequency information about other DAB ensembles as well as FM or AMbroadcast (see section 2.5.8). This serves as a tuning aid to the receiver control and issimilar to the alternative frequency (AF) feature provided by RDS receivers. It offers thepossibility to follow a service when the reception conditions of the actual frequencydegrade too much. When the receiver leaves the coverage area of the DAB signal, it canautomatically switch to the same programme being broadcast on an FM or AMfrequency. It can also be used to switch (back) to DAB as soon as the receiver entersthe coverage area. This feature is of particular interest in the transition phase fromanalogue to digital broadcasting for car receivers. The simplicity for the user is givenbecause the user does not have to adjust the HMI.
8.8.2.4 Pause/Rewind and Record Function
With the Pause/Rewind feature the user of the receiver can pause and rewind the informa-tion received when he has missed something. With the single touch of a button thereception of the favourite station can be paused. Later on, the user can continue listeningfrom the point at which he left the programme. Depending on the internal memorycapacity and the data rate of the service some ten minutes can be recorded. When usingan additional flash card memory the recording time can be increased considerably.
8.8.2.5 Audio-Based Information Service TOPNews
Screen-based data services with graphics are an attractive way to offer a wide range ofinformation to the user. However, the information provided by this type of servicecannot be used by the driver while driving. That’s why an audio-based informationservice called TOPNews was developed and standardised [TS 101498-3].
TOPNews can be regarded as a kind of ‘audio text’ and is similar to the well-known TVvideo-text. A bouquet of different categories of information like sport, weather, traffic ornews is provided to the user. Each category carries a dozen or so latest news clips. Theseclips are carried either in the programme associated data field of an audio service or in adedicated data service and are stored in the receiver. A further option is that the user pre-selects his favourite categories (user profile) in order to reserve the whole memory only to
The Receiving Side 359
![Page 386: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/386.jpg)
those categories he or she is most interested in. In combination with a timer, the user willalways get the latest news after entering the car.
The user can browse with simple navigation means through all the information. Oneconcept used in the field test of TOPNews is similar to the operation of a CD changer.The next or previous news flash within a category is selected in the same way as the nextor previous track on a CD. In the same way, the next or previous category is selected likethe next or previous CD on a CD changer. Due to this concept this service can even beused by the driver while driving.
8.8.2.6 Electronic Programme Guide (EPG)
The EPG is designed to offer the customer an easy way to inform himself about currentand future programmes (see section 5.5). Access to additional information for eachprogramme is possible. For simple use the receiver needs a display with several lines toprovide a good presentation. The EPG can be easily combined with the record functiondescribed above. So the user never misses his favourite programme. To achieve anaccurate start and stop of the recording, the receiver has to evaluate the signaling linkedwith the EPG.
8.8.3 Future Trends
The last sections showed some impressive examples of receiver features and alreadyexisting data services. But combination of fast signal processing in receivers with highdata rate delivery of DAB will further increase receiver functions for customers. For thisthe larger displays more often available nowadays are the basis for a good presentation.Other new functions will not depend on displays. The example in the next section willwork for receivers with and without larger display.
8.8.3.1 The mobile.Info Project
The full name of this trendsetting project is Mobile Platform for Efficient TrafficInformation Services [www.mobile-info.org]. The reason to launch the project wasthe steadily increasing traffic on Europe’s roads which results in more traffic jams.DAB can be one important part to defuse this situation. It offers suitable geographicalcoverage and sufficient capacity for the transmission of traffic services. Therefore thebasic services are from the TPEG Automotive Profile (TAP), a family of TPEG (seesection 4.6.2) application protocols dedicated to automotive information and adoptedfor the use in navigation systems. It allows comprehensive traffic information which inturn is the basis for dynamic routeing of cars. The project covers the whole distribu-tion chain consisting of data collection and processing, broadcasting as well as theprocessing in the receiver in combination with a navigation system. For the field trialsdifferent types of terminals were implemented. The tests included live traffic data,road works, local hazard warnings, speed limits, synthetic traffic messages andJournaline text messages. The successful field trials showed the potential of future
360 Digital Audio Broadcasting
![Page 387: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/387.jpg)
intelligent traffic information. Figure 8.28 shows an overview of the contentprocessing.
The increasing interest of several countries to apply mobile.info platforms resulted inthe decision to join forces with the TMC Forum and the TPEG Forum to form theTraveler Information Services Association (TISA).
Figure 8.28 Content processing in the mobile.info project
The Receiving Side 361
![Page 388: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/388.jpg)
9
Mobile Television andMultimedia
9.1 Overview
9.1.1 History and Requirements
DAB was originally developed in the late 1980s and early 1990s. At that point in time,radio was the gravity point of this system. It became equipped with features well knownfrom FM-RDS. Targets to be reached were high quality audio, homogeneous RF cover-age leading to an uninterrupted and undisturbed sound reproduction also in a mobileenvironment as well as a more efficient use of spectrum – nowadays called the digitaldividend. The only multimedia element at that point of time was the Dynamic Label, anadvanced version of what was called Radiotext for RDS.
In the late phase of the standardisation process – the first edition of the core DABstandard was published in September 1995 – multimedia entered the stage [Hallier,1994b], [Kozamernik, 1995], [Schneeberger, 1996], [Lauterbach, 1996]. The first applica-tions were the Slide Show (SlS) and the Broadcast WebSite (BWS) (see sections 4.4.1 and4.4.2). Early versions of these applications were already implemented for the first DABpilot projects addressing mainly car receivers like the Grundig DRC1000, the BlaupunktHannover 106 or the Panasonic CN-MX0620/0621L.
In the middle of that decade the EU-supported Eureka Project 147 that brought DABto life was not over, but accepted the challenge to move towards a mobile TV applicationfor DAB. Addressing mobile receivers with multimedia content – especially AV stream-ing or ‘Mobile TV’ – relevant for larger user groups is a promising market evolution, butat the same time a challenge provoking appropriate answers to the following issues:
• reliable reception up to vehicle speeds of 300 km/h;• sufficient reproduction quality – quasi error-free;• limited power consumption of the terminals;• high flexibility regarding employment of new applications;• low costs.
Digital Audio Broadcasting: Principles and Applications of DAB, DAB+ and DMB, Third Edition Edited by W. Hoeg and T. Lauterbach© 2009 John Wiley & Sons, Ltd. ISBN: 978-0-470-51037-7
![Page 389: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/389.jpg)
It took another two years before in 1997/1998 an initial draft for a DAB-basedaudio/video streaming application was developed by the corresponding task force.This first DAB mobile TV specification made use of the MPEG-1 standard forsource coding and was already called DAB-DMB [Amor, 1996], [Siegle, 1996],[Lauterbach, 1997c].
Later one migrated to MPEG-2 with a much better coding efficiency. It was especiallythe German company Bosch that pushed a correspondingly adjusted standard towardsratification in WorldDAB, but the Forum was afraid to mix radio with television andthus compete with the DVB Project. Hence it did not approve this still early version ofDABmobile TV for delivery to ETSI. Nevertheless closed user-group applications of thisearly ‘DMB’ system were implemented, in particular for television systems on trains[Kowalski, 1999] and underground lines, e.g. in Berlin.
It took some more years until the idea born in the EU-147 project was combined withcutting edge video coding technology, namely H.264/MPEG-4 AVC, first proposed inGermany [Bauer, 1997], [Grube, 2001] and actually implemented later in South Korea[Lee, 2005], [Cho, 2007], [Lee, 2007]. Another key feature was the improvement of DABreception performance by additionally using a Reed-Solomon code [Chang, 2003], seesections 2.2.3.2 and 2.2.7.2.
The discussion about the right way tomobile TV started again, when this new proposalentered the WorldDMB Forum Technical Committee (TC) in September 2004. Thesituation at that point of time was a bit different from the one a few years before.Competition had arisen. In the first place it was DVB-H that targeted the same market.And the support for this development was wide. But DAB-DMB was one to two yearsahead in terms of its development status.
Another challenge came from the USA with MediaFLO and from Japan with ISDB-T(1 segment). Both systems target at similar applications and markets as DMB.
The advantage of DAB-DMB seen by WorldDAB was the envisaged availability ofterminals in the near future and the advanced status of the draft specification underdevelopment. As a background to this fortunate situation was the intention of anumber of key players from South Korea to implement DAB-DMB (or T-DMB fora better distinction in Korea from S-DMB, which is technically different) there verysoon. DMB obtained official approval as a European ETSI (EuropeanTelecommunication Standard Institute) standard in July 2005 [TS 102427],[TS 102428].
In early 2007 another DAB mobile TV variant appeared that was based on DAB IPTunnelling. An example for the latter path is known in the UK as BT Movio. Thisapplication appears on top of IP algorithms that were not fully specified with openstandards. In the meantime BT Movio disappeared from the market again.
During the standardisation of DMB several WorldDMB members recognised thatthis approach would lead away from convergence and alignment to other standards,especially DVB-H. Hence in spring 2005 the way towards alignment was paved withthe inauguration of a corresponding TC Task Force. It was obvious from the begin-ning that convergence towards DVB, 3G-MBMS and OMA would mean a technicalapproach that is based on the Internet Protocol (IP). An extensive comparisonbetween the remaining two substantial proposals – one acronymed as EDG(Enhanced Data Groups) and the other as DXB (or more precisely eDAB/DXB) –
364 Digital Audio Broadcasting
![Page 390: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/390.jpg)
lead to mainly one disadvantage for each of the two proposals. EDG foresaw a specialTransport Stream variant (DAB-TS) slightly deviating from the MPEG-2 TS, accom-panied by a new DAB Data Group variant. Also the signaling was different fromeDAB/DXB. In summary, EDG came with lower overheads and simpler signalingstructures. On the other hand, eDAB/DXB had a higher overhead, but was protocol-stack- and signaling-wise identical with IP DataCast over DVB-H. The increasedoverhead sat in the PSI/SI and its TS packet structure, often transporting a substantialamount of padding for a limited amount of PSI/SI bytes. Finally this drawback waseliminated by allowing – in a backwards-compatible way – the insertion of differenttable sections into the same TS packet.
Based on this proposal, the DAB-IPDC (Internet Protocol Datacasting) standard wascreated and was published by ETSI in 2008 [TS 102978].
9.1.2 Situation of Mobile TV in Different Parts of the World
At the time of writing (spring 2009) DAB-DMB is regularly implemented in SouthKoreaand was on air in Germany for a period of almost two years, but switched off in early2008. DVB-H was implemented in Italy, the Netherlands, Austria and Switzerland andwas foreseen for implementation in France. The media license awarded in Germany wasreturned to the authorities and it is still unclear if it will be renewed. Japan enjoys mobileTV via ISDB-T. Especially in Europe mobile TV is still waiting for its commercialbreakthrough. One commercial project even failed already in the UK with BT Moviobased on an older DAB standard called IP Tunnelling.
A new approach towards mobile TV via classical broadcasting networks is the use ofDVB-T. This is feasible in the light of the fact that a state of the art DVB-T tuner typicallyconsumes 200 mW and an OLED 2.2’ display 100 mW. Although this power consump-tion is still significantly higher than that required for decoding DVB-H, but still a mobiledevice can reproduce mobile TV with good image quality for a few hours. The advantageof this approach is that more or less all services are free of charge and the DVB-Tcoverage is convincingly wide in Europe, but it is necessary that the multiplex config-uration and the network implementation allow for handheld portable (or even mobile)reception. This is not the case throughout Europe.
DAB-IPDC as a new standard has not been implemented regularly so far.
9.1.2.1 Europe: EU List of Standards
InMarch 2008 the European Commission decided to add theDVB-H standard to the EUList of Standards [EC 2008]. Although member states will be required to encourage theuse of DVB-H, this decision hasn’t any binding or legislative character regarding mobileTV implementations in the member states.
9.1.3 Spectrum Resources
With the agreements found at the end of the RRC04/06 process (now referred to asGeneva 2006 or GE06, see section 7.8.2), frequency resources in Europe for DVB-T and
Mobile Television and Multimedia 365
![Page 391: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/391.jpg)
DAB in VHF and for DVB-T in UHF were increased. Herewith spectrum will alsobecome available for DVB-H.
An opportunity for an introduction of MediaFLO in Europe could occur in theUK with the result of the L-Band spectrum auction in 2008 (40 MHz won by anorganisation mainly known before as a chip manufacturer). This might becomeeasier through the ETSI standardisation process for FLO, which is already inprogress.
As far as spectral efficiency is concerned, all systems in question are of similarperformance when (D)QPSK is being used – and this is the case for all implementationsso far.
On the one hand, DVB-H suffers from quite a high amount of overhead, but on theother hand, with DVB-H statistically multiplexed video coding can be applied leading toa reduced data rate at the same subjective quality.
9.1.4 Integration of Mobile TV Services in DAB/DAB+ Radio Ensembles
A special advantage of DABwas always the individual character of its sub-channels. Thetotal capacity of 864 so called capacity units is shared beneath these physical layer pipes.The inner code rates can be applied individually to each sub-channel and the size ofstream mode channels can be chosen freely with a granularity of 8 kbps. Also thestructure of the data travelling in those sub-channels can be chosen individually (seesection 2.3). Therefore different protocols can be applied on top of the physical layer.This in the end leads to a simple to organise co-existence of DAB radio with DAB+radio, DAB-DMB and DAB-IPDC – all dependent on the special requirements of therelated providers. This freedom of multiplexing is illustrated in Figure 9.1 below, where aDAB Ensemble carries 8 DAB+ and 3 DAB radio services as well as 2 DAB-DMB
Figure 9.1 DAB Ensemble with DAB (light grey) and DAB+ (white) radio services as well as
DAB-DMB (dark grey) television services
366 Digital Audio Broadcasting
![Page 392: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/392.jpg)
services. In this example, each service consists of one service component and occupies asingle sub-channel. Thirteen of these pipes are set up with the following attributes (coderate 1/2 for all, data rate is sub-channel rate):
a) Each DABþ services 40 kbps Equal Error ProtectionLevel 3-A
30 capacity units.
b) Each DAB service 128 kbps Unequal Error ProtectionLevel 3
96 capacity units.
c) Each DAB-DMB service 224 kbps Equal Error ProtectionLevel 3-A
168 capacity units.
9.1.5 Transport Mechanisms with Improved Robustness
The more efficient state-of-the-art source coding algorithms are naturally more sensitiveto transmission errors. Here the original algorithms based on MPEG-1 and MPEG-2were significantly more robust and error-tolerant. H.264 video coding requires anaverage BER as low as 10-8 of the stream at the input of the decoder. DAB was originallydesigned for a BER of 10-4 being sufficient at the input of the MPEG-1/-2 Layer II audiodecoder. Therefore, new transport mechanisms have been introduced into DAB using aconcatenation of the original convolutional code with an additional Reed-Solomon code.These are used for DABþ, DMB and enhanced packet mode, see sections 2.3.3.2 and2.3.3.5.
9.1.6 The MPEG-2 Transport Stream
The MPEG-2 TS is defined within the standard [ISO/IEC 13818-1] and provides astructure composed of packets of fixed length. In addition, the above mentioned systemspart of the MPEG-2 standard defines a limited set of service information with fourcorresponding tables. For all DVB systems this was the common denominator from thestart. The first DVB generation also adopted Reed-Solomon error control coding with afixed number of parity bytes accompanying each TS packet. Also a convolutional byte-wise interleaver was employed.
The adoption of this transport structure, the error control coding and theinterleaving scheme for DAB means that for the first time this layer is not alignedanymore to logical frames on the physical layer as was the case for the MSCstream audio transport mechanism for MPEG-1/-2 Layer II audio and for theMSC packet data transport mechanism. Hence the MPEG-2 TS reflects a newasynchronous packet mode for DAB with fixed packet size. As far as the provisionof metadata is concerned, it is available from a number of layers – DAB (MCI/SI),MPEG-2 TS (PSI/SI), MPEG-4 (object, scene descriptors) and – for DAB-IPDC –IP (ESG).
Generally a Transport Stream can carry a single or multiple service. As far as DMB isconcerned, each single TS transports a single service in order to stay aligned to traditionalDAB service structures.
Mobile Television and Multimedia 367
![Page 393: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/393.jpg)
Figure 9.2 shows the structure of theMPEG transport stream packets. The meaning ofthe header fields is as follows:
• Sync: Synchronisation byte, always set to 0x47, allows – together with the fixed packetsize of 188 Bytes (error control coding excluded) – for easy synchronisation and packetaccess on receiver side.
• TEI: Transport Error Indicator, indicates packet errors already present beforetransmission.
• PUSI: Packet Unit Start Indicator, indicates the presence of an additional Byte afterthe 4-Byte long standard header. If present, the additional Byte indicates the startposition of a new datagram inside the TS packet payload.
• TP: Transport Priority, classifies the priority of the TS packet payload in twocategories.
• PID: Packet IDentifier, identifies elementary streams (e.g. video 1, audio 1, . . . ).• TSC: Transport Scrambling Control, indicates the encryption of the payload.• AFC: Adaptation Field Control, indicates the presence of an adaptation field after the
header.• CC: Continuity Counter, allows for tracking sequence of packets belonging to the
same elementary stream.
The TS multiplexes elementary streams carrying a single service component (video,audio, service information, data applications) each, as shown in Figure 9.3. It further-more provides a receiver clock reference (PCR – program clock reference, 27 MHz) forthe accurate reproduction of the aforementioned service components on the receiver side.
MPEG-2 Transport Stream
MPEG ElementaryStream (video 1)
MPEG-2 Packetized Elementary Stream 1MPEG-2/
DVB PSI/SI
MPEG ElementaryStream (audio 1)
MPEG ElementaryStream (video 2)
MPEG ElementaryStream (audio 2)
MPEG-2 Packetized Elementary Stream 2
MPEG-2 Program Stream 1 MPEG-2 Program Stream 2
Figure 9.3 MPEG protocol stack
PayloadHeader
4 Bytes 184 Bytes
PIDSync
8 bits
TEI PUSI TP TSC AFC CC
13 bits1 bit 1 bit1 bit 2 bits2 bits 4 bits
Figure 9.2 MPEG-2 Transport Stream Packet
368 Digital Audio Broadcasting
![Page 394: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/394.jpg)
The above mentioned systems part of the MPEG-2 standard [ISO/IEC 13818-1] alsodefines the basic programme service information (PSI) tables, namely the ProgramAssociation Table PAT, the Program Map Table PMT, the Conditional Access Table(CAT) and the Transport Stream Description Table (TSDT). It also refers to the NIT,but does not specify that table.
The DVB service information (SI) standard [EN 300 468] defines further tablesrequired for DVB (and DAB) operation. The most important ones are the NetworkInformation Table NIT, the Service Description Table (SDT), the Event InformationTable (EIT) as well as the IP/MAC Notification Table (INT).
The PAT indicates for each service in the multiplex the PID (Packet Identifier) of thecorresponding PMT and also of the NIT common to the multiplex.
The PMT provides the PIDs for all components making up a service as well as the PIDof the relevant Program Clock Reference (PCR).
The NIT conveys information relating to the physical organisation of the multi-plexes/TSs carried via a given network, and the characteristics of the network itself.
The SDT gives further human-readable information about the services like service andprovider names.
The EIT contains information about events for each service in chronological order.Parameters are the event name, start time andduration.An event can be a programme item.
Each table – apart from the PMT – carries a pre-defined PID for table identificationpurposes.
9.1.7 Commonalities of DAB-DMB and DAB-IPDC
Starting from the top of the protocol stack, there is quite a high degree of commonalities ofDAB-DMB andDAB-IPDC (assuming amobile TV application according to [TS 102978]and the corresponding DVB standards). Source coding will be the same in most cases, i.e.video is encoded with H.264/MPEG-4 AVC and audio with HE-AAC v2. Below, theMPEG-2 Transport Stream as well as its error control coding and the convolutionalinterleaving are the same for both. Also all layers below are fully identical – apart fromthe fact that DMB uses one TS and one sub-channel per service and IPDC can insertseveral services into one TS and distribute this single TS via several sub-channels.
9.2 DAB-DMB
9.2.1 Overview
Although the acronym ‘DMB’ sounds like a new broadcasting system, it is in fact anapplication building on the same physical layer DAB as all other applications.
With the MPEG-2 Transport Stream, DAB has adopted for the first time an asyn-chronous transport mechanism. From the beginning, DAB structures were built aroundthe MPEG-1 Layer II audio frames of 24 ms duration. This length is adopted for theLogical Frames of DAB. Also traditional DAB packets – theMPEG-2 TS is nothing elsethan a new packet structure – were aligned to this time period in a way that with all sub-channel rates always an integer number of packets would be delivered.
Mobile Television and Multimedia 369
![Page 395: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/395.jpg)
TheMPEG-2 TS is accompanied by Reed-Solomon parity bytes and builds a structureof constant length packets of 204 bytes, see Figure 9.4. These packets are convolutionallyinterleaved. The whole mechanism is the same as the one used for DVB.
The above mentioned outer coding and interleaving is necessary for assuring a suffi-ciently low BER for quasi error-free video reproduction in all DAB reception environ-ments. Scalability is still given with the different inner code rates provided by the physicallayer DAB.
The adaptation of the MPEG-4 system and synchronisation layer to the MPEG-2system layer is described in the following sub-clause. For source coding H.264/MPEG-4AVC (video) and HE-AAC v2 (audio) or alternatively MPEG-4 BSAC can be applied,i.e. two different profiles are defined for the application DMB.
9.2.2 Transport
The source-coded video and audio content is structured in so called Access Units. Theseare wrapped independently into Synchronisation Layer (SL) packets. In the next stepMPEG-2 structures take over with separate Packetised Elementary Streams for both,audio and video. These as well as the PES packets carrying Object and Scene Description(OD, SD) and also BIFS animation data are multiplexed together into the MPEG-2Transport Stream.
In addition the Initial Object Description (IOD) becomes part of the ProgrammeMapTable PMT in the form of a corresponding descriptor (IOD_descriptor) in the firstdescriptor loop of the PMT. The corresponding stack illustrating these protocol layersis provided with Figure 9.5 below. It further details the figure in Appendix 3 regarding thelayers above the MPEG-2 TS.
DAB PhysicalLayer
Stream Mode
Main ServiceChannel
RS-FEC
TransportStream
(H.264,HE AAC v2
BSAC,BIFS,
MPEG-4Sys/Sync)
Figure 9.4 DAB-DMB Stack
370 Digital Audio Broadcasting
![Page 396: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/396.jpg)
The Object Clock Reference (OCR) for synchronisation of MPEG-4 objects and theComposition Time Stamp (CTS) are inserted into SL/PES packets at least every 100 ms.
9.2.3 PSI/SI Signalling
ForDAB-DMB a limited set of PSI/SI tables [TS 102 428] is employed, mainly describingthe configuration of the single service content within the related Transport Stream (fordetails see sub-clause 9.1.8. above). These are the tables – together with their minimumrepetition rates:
• PAT: Due to the specific DMB structure, i.e. one service per TS, the ProgrammeAssociation Table describes only that one programme service – with a minimumrepetition rate of two per second.
• PMT: The Programme Map Table obeys a number of restrictions for DMB purposesas follows:
• A group of descriptors with Restriction ‘A’ in the table shall include anIOD_descriptor.
• A group of descriptors with Restriction ‘B’ in the table shall include anSL_descriptor for an ES_ID.
The minimum repetition rate is the same as for the PAT above, i.e. at least twice persecond.
• PCR: Minimum repetition rate is 10 times per second.• SD/OD: For both, the scene and the object description information the minimum
repetition rate is twice per second.• OCR/CTS: For both, the object clock reference and the complementary time stamp,
the minimum repetition rate is 10 times per 7 seconds.
MPEG-4 Synchronisation Layer (SL)
DAB Physical Layer
Stream Mode
Main Service Channel
Reed-Solomon Forward Error Correction
MPEG-2 Transport Stream
MPEG-2 Packetized Elementary Stream
H.264/AVC Video Codec
PES PES PSI/SI
SL SL
HE AAC v2 OD/BIFS IOD
PMT PAT
Figure 9.5 DAB-DMB protocol stack in detail
Mobile Television and Multimedia 371
![Page 397: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/397.jpg)
9.2.4 DMB-Radio
The DAB-DMB standard clearly identifies this application as a video one and the wholestandard does not cover its use as a radio application. Nevertheless, on the first view itseems to be quite a trivial exercise to let DAB-DMB be audio- instead of video-centric.But this first impression is not a very accurate one.
Precedence for the use of DAB-DMB for radio purposes provided the German‘watcha’ DAB-DMB project that started in spring 2006. The simple reason for thatapproach was that all remaining services consisted of mobile TV content and one didn’taccept that for MPEG-2 audio the capacity investment would have been in the sameorder as for the TV services in question. This resistance is certainly justified by thestandardisation reality at that point of time, but in the meantime DAB+ (see section3.4.2) has been developed for the purpose of audio transmission using MPEG 4.
Also the big French radio broadcasters announced that they will employ DAB-DMBfor radio purposes. Reasons named were the rich multimedia options and the availabilityof smart devices. Whereas there could hardly be doubts regarding the latter remark –well-known reference is the iRiver B20 – the multimedia options of DAB-DMB are notricher than those based on IP.
From the sheer technical point of view DAB-DMB misses many traditional radiofunctions, among them:
• no announcements enabled;• no Pty signaling;• no Service Component language;• no Cross-referencing to other delivery systems.
9.2.5 Overhead of Low Rate Applications
Every broadcasting system requires the addition of a particular overhead on top of thesheer content to be transported. Typical examples for such an overhead are synchronisa-tion signaling, error control coding as well as service parameter signaling and metadata. Inparticular, when narrowband applications are transported with DAB-DMB, the figuresgiven range from ‘a few percent’ to half of a stream. In order to give such discussion areliable basis, an example case is discussed here in detail – a DMB streaming application.
Let us consider a time slot of a narrowband DAB sub-channel used for DAB-DMBand consisting of a single stream. Because it is a common denominator of the entities wewant to discuss, let it be 7 seconds long. The sub-channel bitrate for this example (otherexamples can be derived from this exercise) is 40 kbps. In the binary case ‘k’ for ‘kilo’ isequivalent to 1024. An MPEG-2 Transport Stream fills the sub-channel completely,which means that within the 7 seconds 175.69 MPEG-2 TS packets – all with 16 Reed-Solomon parity bytes attached – can be transported.
Starting with the PSI/SI signalling required for this use case, we need to transport thetwo tables PAT (ProgramAssociation Table) and PMT (ProgramMapping Table) every500ms. Hence within 7 seconds 28 of those tables occur and 147.69 TS packets are left forother purposes – assuming that each of the tables can be accommodated by one single TSpacket. The MPEG-4 Initial Object Descriptor IOD is part of the PMT.
372 Digital Audio Broadcasting
![Page 398: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/398.jpg)
For a complete description of the object transported – i.e. the application data stream –theMPEG-4 system layer entity OD (Object Description) gets its PID and correspondingTS packets that shall be repeated every 500 ms again. So 14 packets are assigned to ODand the remaining amount sums up to 133.69 TS packets. These packets offer 184 byteseach for the payload. So altogether 24,598.96 bytes are available for payload to betransmitted.
For controlling the 27 MHz receiver clock accurately, the ‘Program Clock Reference’PCR parameter is required every 100ms. PCR is provided within the so called adaptationfield being part of a TS packet and located right after the 4-byte header. The PCR carriesthe same PID as the accompanied stream and can herewith be transported in the TSpackets carrying the payload. PCR travels in the Adaptation field and occupies 8 bytesper occurrence. In total 560 bytes will be consumed by PCR in seven seconds. With this,24,038.96 Bytes are left.
MPEG-4 Access Units (AU) carry the MPEG-4-encoded content. Each AU isembedded in an SL packet and the SL packet in a PES packet. Insertion of PES packetsinto TS packets can be done in a fragmented way. Assuming a length in time of 60 ms foreach MPEG-4 AU, 116.67 of them need to be transported within seven seconds. This isequivalent to the number of SL and PES packets employed for the transport. The PESpacket overhead is 5 bytes per packet and the SL packet overhead is 1 byte. Hence thecomplete overhead for 7 seconds is 700 bytes.
Due to the fact that every 700 ms the Object Clock Reference (OCR) for synchronisa-tion of MPEG-4 objects and the Composition Time Stamp (CTS), each of them 33 byteslong, are required, every 11th PES/SL packet carries 66 bytes of this overhead inaddition, which sums up to – once again – 700 bytes.
Subtracting these 1400 bytes from the 24,038.96 above, there are 22,638.96 Bytesavailable for the transport of naked Access Units. This value can be converted to 25.27kbps remaining bitrate for the Access Units. It is equivalent to 63.17% of the sub-channelbitrate of 40 kbps. So the overhead for the discussed example is 36.83%.
With this calculation and the related assumptions applied to several more sub-channelbitrates we get the results presented in Figure 9.6. In summary, it is recognised that for
50
Over-head[%]
40
30
20
10
16 32 48 64 80 192 Sub-channelBitrate [kbps]
Figure 9.6 Overhead (minimum) as function of application data rate
Mobile Television and Multimedia 373
![Page 399: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/399.jpg)
applications requiring low sub-channel bit rates the combination of MPEG-2 andMPEG-4 system layers leads to quite a significant overhead. For higher data rates theoverhead is less significant.
9.2.6 DMB Implementations
The first country that regularly implemented DMB was the one that also initialised thestandardisation process within the WorldDAB Forum – South Korea. The introductionthere dates back to late 2005 and ‘T-DMB’ – as DAB-based DMB is identified in thatcountry – co-exists with a system called ‘S-DMB’, but which is technically completelydifferent from the broadcasting system described here.
In Germany DMB was introduced as a regular service in May 2006, i.e. in time for thefootball world cup 2006 taking place in this country. It remained on air until early 2008.The two devices attracting the highest interest were the mobile phones Samsung SGH-P900 and LG V9000 with integrated DAB/DMB functionality.
The portable multimedia device receiver B20 shall be named here as well since it isprobably the most advanced receiver for many of the applications described in this bookat this point of time – including DAB+.
Also the Peoples Republic of China put DMB on air in several areas of the country inpreparation for the 2008 Olympics. Initially, half a million devices were imported, butlater on the production of DMB devices started in China. In this large country severaldifferent systems were tried out and currently there seems to be a preference for systemsdeveloped in China, e.g. CMMB/STiMi.
Tests with DMB were executed in many European countries in 2008, among theseCzech Republic, Italy, Luxemburg, Malta, the Netherlands, Norway, Portugal Spain,Sweden, Switzerland and the UK. Outside Europe trials are undertaken in Australia,Ghana, Indonesia, Kuwait, Malaysia, New Zealand, Singapore and South Africa.
A special case is France where decisions were taken that DMB shall become a regularservice for multimedia radio purposes soon.
9.3 DAB-IPDC
The movement towards this standard was initialised in March 2005 by kicking offWorldDAB TC Task Force Alignment. The basis for this was the presence of first hybridconsumer equipment and the expectation for more. Hybrid devices employ more than asingle broadcasting and/or mobile communication standard.
Although a number of proposals were made – most promising were certainly the EDG/DAB-TS and the eDAB/DXB ones – the WorldDMB Forum in the end decided in favourof the one explained in detail below, because a family approachwithin the broadcast societywith hooks towards the mobile communication world was seen as most future-proof.
9.3.1 Overview
Similar to DAB-DMBdescribed above, DAB-IPDCmakes use of theMPEG-2 TransportStream as an underlying layer, but opposite to DAB-DMB, DAB-IPDC is able to provideroom for several services in the same TS. This directly leads to the significant advantage
374 Digital Audio Broadcasting
![Page 400: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/400.jpg)
that statistical multiplexing can be employed and the corresponding gain can be used fortransporting more services. The protocol stack of DAB-IPDC is shown in Figure 9.7.
In the same way as IPDC via DVB-H, DAB-IPDC encapsulates content in IP data-grams and those datagrams in multi-protocol encapsulation (MPE) sections. Opposite toDVB-H, DAB-IPDC does not require a third layer of error protection. It is sufficientlyrobust even for mobile reception with the DAB-immanent convolutional coding cas-caded with the Reed-Solomon error control coding as used forDVB-T. Here DAB-DMBand DAB-IPDC are equivalent.
As far as overhead is concerned, DAB-IPDC naturally comes with IP protocol over-head that is not present for the application DAB-DMB.
Although both mechanisms might serve for mobile TV applications in the first place,DAB-IPDC can make direct use of a range of existing CBMS applications defined by theDVB project or – via the OMA-BCAST adaptation specification for DVB-H – can evenfeature quite a wide range of applications defined by the Open Mobile Alliance.
Last but not least, DAB-IPDC is in line with the current EU-driven movements inEurope favouring DVB-H as the preferred technology for mobile TV on that continent.
In order to enable power saving best, the above mentioned single TS can be distributedservice-wise over several smaller DAB sub-channels in order to maintain the option todecode just those sub-channels that are carrying the currently reproduced service.
9.3.2 Transport
As illustrated with Figures 9.7 and 9.8 below, DAB-IPDC builds a basis for mobile TVapplications as well. In the same way as DMB, it makes use of the MPEG-2 Transport
OMAAdapt.OMA
Adapt.
Stream Mode
Main ServiceChannel
RS-FEC
IPDC
IP A
pplic
atio
n
OM
A-B
CA
ST
DV
B-C
BM
S
TransportStream
DAB PhysicalLayer
Figure 9.7 DAB-IPDC Stack
Mobile Television and Multimedia 375
![Page 401: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/401.jpg)
Stream and applies outer error control coding as well as convolutional interleaving to theTS packets.
The main difference to DMB is that several services can travel in the same TS, which inturn enables the application of statistical multiplexing to the video streams of thoseservices. This smart approach results in one to two more TV services that can betransported at the same quality level with a single DAB Ensemble!
In addition, the TS packets belonging to the same service are assigned to a certaingroup of DAB sub-channels. Therefore the receivers need to decode only those
Audio 1 Video 1 Audio 2 Video 2 Audio 3 Video 3 Video 2 Audio 3
Video 1 Audio 2 Video 2 Audio 3 Video 3 Video 2 Audio 3 Audio 3
Audio 1 Video 1 Audio 2 Video 2 Audio 3 Video 3 Video 2 Audio 3
Audio 1 Video 1 Audio 2 Video 2 Audio 3 Video 3 Video 2 Audio 3
Audio 1 Video 1 Audio 2 Video 2 Audio 3 Video 3 Video 2 Audio 3
Audio 1 Video 1 Audio 2 Video 2 Audio 3 Video 3 Video 2 Audio 3
Audio 1 Video 1 Audio 2 Video 2 Audio 3 Video 3 Video 2 Audio 3
Audio 1 Video 1 Audio 2 Video 2 Audio 3 Video 3 Video 2 Audio 3
Video 1 Audio 2 Video 2 Audio 3 Video 3 Video 2 Audio 3
Figure 9.9 Single big sub-channel (600 kbps) transporting TS packets of 3 services in macro-sliced
manner (1800 bytes per 24 ms logical frame, equivalent to 8.82 TS packets incl. RS-FEC)
RTP/SRTP
DAB
MPEG-2 Transport Stream
Reed-Solomon Forward Error Correction
Multi-Protocol Encapsulation (+ MPE-FEC for DVB-H)
Internet Protocol (IP)
Unidirectional Delivery Protocol (UDP)
H.264/AVC (statmux)
Raptor (opt.)
File
DVB-H
PSI/SI
HE AAC v2
ALC/LCT
FLUTE
Figure 9.8 Protocol stacks for IPDC on top of DAB and DVB-H physical layers
376 Digital Audio Broadcasting
![Page 402: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/402.jpg)
sub-channels that carry the desired service. Due to the statistical multiplexing a part ofthose sub-channels will also carry TS packets of other services. Hence after sub-channelselection still packet stripping needs to be applied by the terminals.
Furthermore, DAB-IPDC is closely aligned to DVB-H and hence applies IP protocolsabove the TS. Also all signaling and IP structures are identical with DVB-H. So onceimplemented, the same middleware can process DVB-H and DAB-IPDC. Opposite tothe DAB, DVB-H requires an additional error control coding layer onMPE level (MPE-FEC) accompanied by virtual time interleaving.
The difference between the classical transport of a ‘big’ Transport Streams via a singlesub-channel and its transport via several smaller sub-channels shall be illustrated withFigure 9.10 below. The gain in terms of micro time slicing is described above.
9.3.3 PSI/SI Signalling
A few rules are applied to the provision of PSI/SI in order to enable receivers to easilyfind that information especially for the sake of a quick start of content reproduction afterdevice switch-on:
• All PSI/SI shall travel in the primary sub-channel of the DAB-IPDC service.• The Programme Association Table (PAT) describes only one programme service and
shall be repeated at least twice a second.• One single Program Map Table (PMT) shall describe the whole IP Platform with its
transported MPEG Services. Its minimum repetition rate is the same as for the PAT’s,i.e. twice a second.
9.3.3.1 Compact PSI/SI/SAT
As illustrated with Figure 9.11, the signalling overhead for DAB-IPDC was significantlyreduced by a simple measure. If PAT-carrying TS packets provide enough unused space,
Audio 1
Audio 2
Audio 2
Audio 2
Audio 1
Audio 2
Audio 2
Audio 2 Audio 1
Audio 2
Audio 2
Audio 2
Audio 1
Audio 2
Audio 2
Audio 2 Audio 1
Audio 2
Audio 2
Audio 1
Audio 2
Audio 2
Audio 2
Audio 2
Audio 1
Audio 2
Audio 2
Audio 1
Audio 2
Audio 2
Audio 2
Audio 2
Audio 1
Audio 2
Audio 2
Audio 1
Audio 2
Audio 2
Audio 2
Audio 2
Figure 9.10 Five sub-channels (120 kbps each) transporting TS packets of 3 services in micro-
sliced manner (360 bytes per sub-channel per 24 ms logical frame, equivalent to 1.76 TS packetsincl. RS-FEC)
Mobile Television and Multimedia 377
![Page 403: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/403.jpg)
other PSI/SI/SAT table sections (e.g. PMT) might be inserted into the adaptation field. Itis not permitted to move all tables to the adaptation fields. A particular portion shalltravel in the conventional way. For details see [TS 102978].
This way, even legacy TS processing would not be confused, i.e. this is a backwards-compatible solution. Of course, existing middleware would not find the inserted tablesand hence for new devices the corresponding amendment should be applied to theexisting PSI/SI middleware.
9.3.4.2 Sub-channel Assignment Table (SAT)
The Sub-channel Assignment Table (SAT) maps the services by means of theirelementary_PIDs to the sub-channels (physical layer pipes) that are identified withtheir service_component_index. With this information, the receivers are enabled tograb those and only those sub-channels that are carrying the desired service. This way,micro-time slicing can still be applied – in the presence of a ‘big TS’ permitting forstatistically multiplexed video coding of the different video streams.
9.3.4 Application ‘Mobile TV’
Source content is encoded with e.g. H.264/AVC (video) and HE AAC v2 (audio) algo-rithms. As far as video is concerned, the encoding process shall be realised in a statisti-cally multiplexed manner. For this approach a maximum constant bitrate is fixed for thesum of the output of all correspondingly grouped video codecs. This available bandwidthis assigned partially to the single video streams depending on what they require forparticular time intervals that the coding process is structured with – e.g. one second.With this, the streams will differ over time in their capacity requirements, but altogetherwill never exceed the fixed total bandwidth. This process leads to significant capacitygains in the order of 20 to 30%, depending on image quality requirements and thenumber of streams encoded in parallel. The processing of the different streams isshown in Figure 9.12.
The access units output by the video and audio codecs are wrapped into RTP data-grams first. This datagram is extended to a UDP one suited for unidirectional transportmeans, i.e. broadcasting. After that the IP datagram is completed with the IP headerconsisting of source and destination address. During this transport protocol encodingprocess content of services and service components is kept together. Synchronisation ofcontent belonging together – with video and audio as the most critical components in
PAT
PATAdaptation Field
PATAdaptation FieldPMT
Figure 9.11 Compact PSI/SI/SAT (here: PMT inserted into PAT-carrying TS packet)
378 Digital Audio Broadcasting
![Page 404: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/404.jpg)
terms of lip sync accuracy in the first place – is realised by means of RTCP, a time stampmechanism allowing for accurately synchronised reproduction of the different streams atthe receiving end of the broadcasting chain.
IP datagrams are then encapsulated in multi-protocol encapsulation (MPE) sec-tions. MPE is also able to encapsulate other higher layer protocol datagrams (e.g.Ethernet). Opposite to DVB-H, no MPE-FEC sections are built since DAB doesn’trequire error control coding layer for fulfilling the mobile TV service qualityrequirements. That also means lower overhead (here DVB-H typically adds anoverhead of 25%).
The MPE sections are inserted into TS packets of 188 bytes length each and those areaccompanied by 16 Reed-Solomon parity bytes resulting in 204 byte long packets. Inaddition the packets are convolutionally interleaved in a byte-wise manner. These are allstandard DVB procedures.
After that stage, the RS-FEC’ed TS packets are filled in order into a limited numberof pre-defined sub-channels (! SAT, Sub-channel Assignment Table) in a determi-nistic way enabling their extraction in the same order on the receiver side. Due to thestatistical multiplexing process, there will always be enough space for all TS packets,but the packets of single service will swap into neighbouring sub-channels whenevertheir capacity requirement is higher. All the sub-channels a single service is allowed tooccupy are described in the sub-channel assignment table (SAT). So the receiver willonly strip the content of this limited number of sub-channels and will ignore the rest.This way power saving mechanisms based on micro time slicing like power cycling can
TV Service 1 TV Service 2 TV Service 3
Statistically multiplexingH.264 video encoder
Audio encoderHE AAC v2
Audio 1 Video 1 Audio 2 Video 2 Audio 3 Video 3IP/UDP/RTP & MP
encapsulation
A1 V1Transport Stream wrappingand Reed-Solomon coding
V1 V1 A1 V2 V2 A3 V3 V3 V3 V3
A1 V1Forney interleaving V1 V1 A2 V2 V2 A3 V3 V3 V3 V3
Subch. A Subch. B Subch. C Subch. D Subch. E Subch. F
ESG
ESG
ESGESG
ESGESG
PSI/SI
PSI/SIPSI/SI
PSI/SIPSI/SI
Sub-channel feeding
Figure 9.12 Assigning service content to multiple sub-channels
Mobile Television and Multimedia 379
![Page 405: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/405.jpg)
be applied. Of course, receivers still need to separate wanted from unwanted content,because one or more of the decoded sub-channels are consisting of content of morethan the desired service.
9.4 Application Standardisation
Historically the bearer-related fora overtook the responsibility of drafting the norms forthe applications they intended to apply individually. Nowadays this approach would betoo inflexible on its own. Therefore the adoption of externally developed application andtransport protocol standards will become a common exercise. Corresponding liaisons arebuilt already with the Joint Technical Group (JTG) of the DVB Project and theWorldDMB Forum.
Due to the more challenging competition with wireless and mobile communicationstandards and implementations, but also for enabling seamless handover between dif-ferent bearer technologies, the collaboration within the broadcast camp and with thegroups producing the wireless and mobile communication as well as bearer-agnosticapplication standards shall be strengthened.
Convergence towards a ubiquitous IP environment for communication purposesmight be the mid to long term target.
9.5 Conclusions
Although structurally DMB and DAB-IPDC represent different layers of the DABprotocol stack, they are also used as acronyms for two different ways DAB offers fortransporting television andmultimedia content, i.e. these acronyms cover the whole stackabove the physical layer.
Both are requiring an outer FEC layer realised with a Reed-Solomon code of samelength and error correction capability. Also on the top end of the stack, both routes areequivalent in terms of the mobile TV application regarding source coding – video withH.264/AVC and audio with HE-AAC v2 (plus MPEG-4 BSAC for DMB). The maindifference sits in the middle and affects how access units are transported. Also the LayerII signaling differs consistently.
DMB sticks to the original service structure of DAB and employs a single service per(stream mode) sub-channel (in fact, it differs in so far as DAB foresaw a single servicecomponent per sub-channel and not a service) transported by means of the standardDVB protocol – the MPEG-2 Transport Stream. MCI/SI signaling and service accessstructures of DAB could be retained and were accompanied by MPEG-2 (PSI/SI) andMPEG-4 system layer signaling elements where required. Herewith existing DVB mid-dleware can be re-used with limited adjustment to the application in question.
The drawback of this solution is that statistical multiplexing in conjunction with thevideo source coding is not enabled. Hence the significant gain of this approach cannot berealised.
DMB does not wrap source-coded content into IP/UDP/RTP datagrams, which onthe one hand side saves quite some overhead, but on the other hand does not lead toalignment in a more and more IPised communication environment.
380 Digital Audio Broadcasting
![Page 406: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/406.jpg)
The lower the bitrate of the DMB service the higher the overhead portion will be. Fortypical audio stream bitrates with state-of-the-art source coding, DMB comes with quitea significant overhead. Therefore DMB was not specified for radio purposes.
Although seldomly used, BIFS is a powerful tool and enhances DMB in an attractiveway. It would even be possible to use DMB-BIFS as an application accompanying DABand DAB+ radio services.
DAB-IPDC uses a different approach and puts emphasis on making use of thestatistical multiplexing gain while enabling micro time slicing through a dedicated dis-tribution of service content over a limited number of sub-channels. The receiver – as withradio services – only needs to grab the capacity units that belong to the desired sub-channels and can power down in between. Also macro-time slicing can be used in asimilar way as forDVB-H, but would require correspondingmemory on the receiver side.The efficiency of macro time slicing for DAB in general is influenced by the fixed timeinterleaving of 384 ms.
The statistical multiplexing gain leads to one or two more TV services per multiplex,depending on the settings.
The use of IP datagrams led, leads and will also in the future lead to discussions in thebroadcasting environment. It is obvious that for free-to-air services the overhead mightbe unnecessarily high. On the other hand addressing of devices for e.g. content requiringsubscription is well eased. Also the distribution of content received via DAB in a homenetwork requires IPisation. In a communication environment more and more based onIP, broadcasting cannot ignore this trend. For the mentioned reasons, other systems havechosen an ‘all IP approach’, i.e. transporting content in any other form than IP data-grams is not enabled at all.
Themain goal of DAB-IPDCwas to achieve the maximum degree of convergence withDVB-H. This was achieved and as shown above, both IPDC mechanisms are equivalentabove the bearer system’s physical layer. Herewith the implementation in hybrid devicesable to receive DAB and DVB-H in parallel is eased dramatically.
This equivalence also opens the door towards OMA-BCAST applications in parallel toDVB-H.
Last but not least DAB-IPDC fulfills the requirement for a unique standard for mobiletelevision in Europe.
Mobile Television and Multimedia 381
![Page 407: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/407.jpg)
Appendix 1
DAB Parameters for Modes I, II,III and IV
A1.1 System Parameters
Parameter Mode I Mode IV Mode II Mode III
Sub-carriersNumber of sub-carriers: K 1536 768 384 192
Sub-carrier spacing: Df 1 kHz 2 kHz 4 kHz 8 kHz
Time relationsTransmission frame duration: TFrame 96 ms 48 ms 24 ms 24 ms
196608T* 98304T 49152T 49152T
Symbol duration: TsymOFDM ¼ Tguard þ Tu 1246 ms 623 ms 312 ms 156 ms2552T* 1276T 638T 319T
Guard interval duration: Tguard 246 ms 123 ms 62 ms 31 ms504T* 252T 126T 63T
Symbol duration without Tguard: Tu ¼ 1/Df 1000 ms 500 ms 250 ms 125 ms2048T* 1024T 512T 256T
Null-symbol duration: Tnull 1297 ms 648 ms 324 ms 168 ms2656T* 1328T 664T 345T
OFDM symbolsOFDM symbols per transmission frame
(without null symbol): L
76 76 76 153
OFDM symbols with PR data 1 1 1 1
(continued overleaf )
Digital Audio Broadcasting: Principles and Applications of DAB, DAB+ and DMB, Third Edition Edited by W. Hoeg and T. Lauterbach© 2009 John Wiley & Sons, Ltd. ISBN: 978-0-470-51037-7
![Page 408: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/408.jpg)
A1.2 Important Relations
1 CU ¼ 64 bits ¼ 8 bytes
1 CIF ¼ 864 CU ¼ 55.296 kbits ¼ 6.912 kbytes
1 FIB ¼ 256 bits ¼ 32 bytesWhere: CU ¼ Capacity Unit
(continued )
Parameter Mode I Mode IV Mode II Mode III
OFDM symbols with FIC data 3 3 3 8OFDM symbols with MSC data 72 72 72 144
FIC/MSCFIC: FIBs per transmission frame 12 6 3 4
FIBs per 24 ms frame 3 3 3 4
MSC: CIFs per transmission frame 4 2 1 1CIFs per 24 ms frame 1 1 1 1
FIBs/CIF 3 3 3 4
Transmission frameBit per OFDM symbol 3.072 kbit 1.536 kbit 0.768 kbit 0.384 kbit
Bit per transmission frame (withoutPR symbol)
230.4 kbit 115.2 kbit 57.6 kbit 58.368 kbit
Transmission frames per second 10.416 20.832 41.666 41.666
Data ratesFIC data rate (gross, code rate always 1/3) 96 kbps 96 kbps 96 kbps 128 kbps
MSC data rate (gross) 2.304Mbps
2.304Mbps
2.304Mbps
2.304Mbps
Max. MSC net data rate for a singlesub-channel**
1.824Mbps
1.824Mbps
1.824Mbps
1.824Mbps
Total data rate (with PR Symbol) 2.432Mbps
2.432Mbps
2.432Mbps
2.448Mbps
Network specific parametersMaximum echo delay (� 1.2 � Tguard) 300 ms 150 ms 75 ms 37.5 msMaximum propagation path difference �100 km �50 km �25 km �12.5 km
(90 km) (45 km) (22.5 km) (11.25 km)Maximum fRF*** 340 MHz 1.38 GHz 2.76 GHz
**** 375 MHz 1.5 GHz 3.0 GHz
* System clock: 2.048 MHz with a period T of 0.48828 ms.** The multiplex configuration for maximum data rate is as follows: one sub-channel with 1.824
Mbps and code rate 4/5 and a second sub-channel with 16 kbps and code rate 3/4. Theremaining multiplex capacity of 64 bit per 24 ms frame is equivalent to an uncoded data rate
of 8 kbps.*** @ max fRF: maximum S/N-degradation of 4 dB for a BER of 10–4 at a speed of 200 km/h
[Le Floch, 1992].
****@max fRF: maximum S/N-degradation of 4 dB for a BER of 10–4 at a speed of 180 km/h and1 dB at 90 km/h [Kozamernik, 1992].
384 Appendix 1
![Page 409: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/409.jpg)
A1.3 Coarse Structure of the Transmission Frame
|Null-symbol | PR | FIC (FIBs) | MSC (CIFs)|
Where: PR ¼ Phase Reference symbol
FIC ¼ Fast Information ChannelFIB ¼ Fast Information BlockMSC¼Main Service Channel
CIF ¼ Common Interleaved Frame
Appendix 1 385
![Page 410: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/410.jpg)
Appendix 2
Frequencies for Terrestrial andSatellite DAB Transmission
The frequencies for terrestrial DAB transmission (T-DAB) were co-ordinated at a CEPTplanning conference [CEPT, 1995] for Band I (47 MHz to 68 MHz), Band III (174 MHzto 240 MHz) and L-Band (1452 MHz to 1467,5 MHz), valid in particular for Europeanterrestrial DAB implementations (T-DAB), see Table A2.1. A further internationalplanning conference for the VHF and UHF broadcasting bands in Europe, Africa,Middle East and the Islamic Republic of Iran held its final session in Geneva fromMay to June 2006 [RRC06, 2006]. This resulted for T-DAB in increased spectrum inBand III (VHF), which is partially already available. After a transition period it willbecome fully available in 2015 (except for a few countries, where this will not happen until2020). The actual T-DAB frequency blocks remained unchanged in this process, only anew assignment of which block may be used in which area.
Slightly different centre frequencies for Band III were specified for DAB and DRMservices in Korea, see Table A2.4 [WorldDMB Website]. The DAB block numbers inBand I and Band III correspond to the naming convention for TV channels in Europe.
CENELEC made a subsequent Industry standard [EN 50248] which does not recom-mend frequencies in Band I (printed in italics), due to the high man-made noise withinthis frequency range. Therefore, there will be no receiver equipment available which doessupport Band I.
NOTE 1: CENELEC introduced three additional DAB blocks named 10N, 11N, 12Nwhich occupy some of the broader guard intervals, see Table A2.1. Offsets to Blocks 10A,11A and 12A will allow these blocks to be used in areas also covered by B/PAL/NICAMTV transmitters operating in the lower adjacent channels. The TV transmitters also needto be offset in frequency by the maximum allowable amount (approx. 200 kHz).
Digital Audio Broadcasting: Principles and Applications of DAB, DAB+ and DMB, Third Edition Edited by W. Hoeg and T. Lauterbach© 2009 John Wiley & Sons, Ltd. ISBN: 978-0-470-51037-7
![Page 411: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/411.jpg)
Table A2.1 Frequencies for T-DAB in Europe
T-DAB Blocknumber
T-DAB Blocklabel
Centrefrequency (MHz)
Block cornerfrequencies (MHz)
Lower/upperguard distance
(kHz)
Band I: 47,0 to 68,0 MHz
(1) 2A 47,936 47,168 to 48,704 168/176(2) 2B 49,648 48,880 to 50,416 176/176
(3) 2C 51,360 50,592 to 52,128 176/176(4) 2D 53,072 52,304 to 53,840 176/320(5) 3A 54,928 54,160 to 55,696 320/176
(6) 3B 56,640 55,872 to 57,408 176/176(7) 3C 58,352 57,584 to 59,120 176/176(8) 3D 60,064 59,296 to 60,832 176/336(9) 4A 61,936 61,168 to 62,704 336/176
(10) 4B 63,648 62,880 to 64,416 176/176(11) 4C 65,360 64,592 to 66,128 176/176(12) 4D 67,072 66,304 to 67,840 176/160
Band III: 174,0 to 240,0 MHz
13 5A 174,928 174,160 to 175,696 160/17614 5B 176,640 175,872 to 177,408 176/17615 5C 178,352 177,584 to 179,120 176/176
16 5D 180,064 179,296 to 180,832 176/33617 6A 181,936 181,168 to 182,704 336/17618 6B 183,648 182,880 to 184,416 176/176
19 6C 185,360 184,592 to 186,128 176/17620 6D 187,072 186,304 to 187,840 176/32021 7A 188,928 188,160 to 189,696 320/176
22 7B 190,640 189,872 to 191,408 176/17623 7C 192,352 191,584 to 193,120 176/17624 7D 194,064 193,296 to 194,832 176/33625 8A 195,936 195,168 to 196,704 336/176
26 8B 197,648 196,880 to 198,416 176/17627 8C 199,360 198,592 to 200,128 176/17628 8D 201,072 200,304 to 201,840 176/320
29 9A 202,928 202,160 to 203,696 320/17630 9B 204,640 203,872 to 205,408 176/17631 9C 206,352 205,584 to 207,120 176/176
32 9D 208,064 207,296 to 208,832 176/33633 10A 209,936 209,168 to 210,704 336/(176)NOTE 1 10N 210,096 209,328 to 210,864
34 10B 211,648 210,880 to 212,416 (176)/17635 10C 213,360 212,592 to 214,128 176/17636 10D 215,072 214,304 to 215,840 176/32037 11A 216,928 216,160 to 217,696 320/(176)
NOTE 1 11N 217,088 216,320 to 217,85638 11B 218,640 217,872 to 219,408 (176)/176
388 Appendix 2
![Page 412: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/412.jpg)
The remaining frequency range in L-Band (1467,5 MHz to 1492 MHz) was nowrecommended for DAB satellite applications (S-DAB), see Table A2.2.
A slightly different frequency scheme for the L-Band was recommended for use inCanada (see Table A2.3), which is now also foreseen for use in Australia. These channelshave been numbered separately from 1 to 23.
Table A2.2 Recommended centre frequencies for S-DAB in Europe according to [EN 50248]
T-DAB Blocknumber
T-DAB Blocklabel
Centre frequency(MHz)
Block corner frequencies(MHz)
L-Band: 1452,0 to 1467,5 MHz
60 LJ 1468,368 1476,600 to 1469,136
61 LK 1470,080 1469,312 to 1470,848
(continued overleaf )
Table A2.1 (continued )
T-DAB Blocknumber
T-DAB Blocklabel
Centrefrequency (MHz)
Block cornerfrequencies (MHz)
Lower/upperguard distance(kHz)
39 11C 220,352 219,584 to 221,120 176/17640 11D 222,064 221,296 to 222,832 176/336
41 12A 223,936 223,168 to 224,704 336/(176)NOTE 1 12N 224,096 223,328 to 224,86442 12B 225,648 224,880 to 226,416 (176)/176
43 12C 227,360 226,592 to 228,128 176/17644 12D 229,072 228,304 to 229,840 176/17645 13A 230,784 230,016 to 231,552 176/176
46 13B 232,496 231,728 to 233,264 176/17647 13C 234,208 233,440 to 234,976 176/3248 13D 235,776 235,008 to 236,544 32/176
49 13E 237,488 236,720 to 238,256 176/17650 13F 239,200 238,432 to 239,968 176/32
L-Band: 1452,0 to 1467,5 MHz
51 LA 1452,960 1452,192 to 1453,728 192/176
52 LB 1454,672 1453,904 to 1455,440 176/17653 LC 1456,384 1455,616 to 1457,152 176/17654 LD 1458,096 1457,328 to 1458,864 176/176
55 LE 1459,808 1459,040 to 1460,576 176/17656 LF 1461,520 1460,752 to 1462,288 176/17657 LG 1463,232 1462,464 to 1464,000 176/17658 LH 1464,944 1464,176 to 1465,712 176/176
59 LI 1466,656 1465,888 to 1467,424 176/�
Appendix 2 389
![Page 413: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/413.jpg)
Table A2.3 Recommended centre frequencies for DRB inCanada (the Eureka 147 DAB system in Canada is officiallydesigned as DRB = Digital Radio Broadcasting) according to
[EN 50248]
Canadian DRB Channel number Centre frequency (MHz)
L-Band: 1452,0 to 1467,5 MHz
1 1452,8162 1454,5603 1456,3044 1458,048
5 1459,7926 1461,5367 1463,280
8 1465,0249 1466,76810 1468,512
11 1470,25612 1472,00013 1473,744
14 1475,48815 1477,23216 1478,97617 1480,720
18 1482,46419 1484,20820 1485,952
21 1487,69622 1489,44023 1491,184
(NOTE 2: These frequencies are also valid for Australia)
Table A2.2 (continued )
T-DAB Blocknumber
T-DAB Blocklabel
Centre frequency(MHz)
Block corner frequencies(MHz)
62 LL 1471,792 1471,024 to 1472,560
63 LM 1473,504 1472,736 to 1474,27264 LN 1475,216 1474,448 to 1475,98465 LO 1476,928 1476,160 to 1477,696
66 LP 1478,640 1477,872 to 1479,40867 LQ 1480,352 1479,584 to 1481,12068 LR 1482,064 1481,296 to 1482,832
69 LS 1483,776 1483,008 to 1484,54470 LT 1485,488 1484,720 to 1486,25671 LU 1487,200 1486,432 to 1487,96872 LV 1488,912 1488,144 to 1489,680
73 LW 1490,624 1489,856 to 1491,392
390 Appendix 2
![Page 414: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/414.jpg)
Table A2.4 Recommended centre frequencies for DAB /DMB in Korea according to [WorldDMB Website]
Block Label Centre frequency (MHz)
ROK 7A 175.280
ROK 7B 177.008ROK 7C 178.736ROK 8A 181.280
ROK 8B 183.008ROK 8C 184.736ROK 9A 187.280
ROK 9B 189.008ROK 9C 190.736ROK 10A 193.280ROK 10B 195.008
ROK 10C 196.736ROK 11A 199.280ROK 11B 201.008
ROK 11C 202.736ROK 12A 205.280ROK 12B 207.008
ROK 12C 208.736ROK 13A 211.280ROK 13B 213.008ROK 13C 214.736
Appendix 2 391
![Page 415: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/415.jpg)
Appendix 3
DAB System Protocol Stack
The following figure called DAB System Protocol Stack (taken from [Herrmann, 2007])shows all relevant audio, video and data transmission protocols and applications for theDAB system family (DAB, DAB+, DMB) services in a compressed overview. Thedetailed functions and requirements are described in the related chapters as indicatedin the figure.
Digital Audio Broadcasting: Principles and Applications of DAB, DAB+ and DMB, Third Edition Edited by W. Hoeg and T. Lauterbach© 2009 John Wiley & Sons, Ltd. ISBN: 978-0-470-51037-7
![Page 416: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/416.jpg)
DAB Physical Layer
Stream Mode Packet Mode
Main Service ChannelFast InformationChannel
MCI SI
FIDC
TMC&
EWS
LFA
DA
B R
adio
(MP
EG
-1/2
Lay
er II
)
DA
B+
Rad
io(H
E A
AC
v2)
FEC
PAD
FEC
DMB Video(H.264,
HE AAC v2BSAC,BIFS,
MPEG-4Sys/Sync)
FEC (optional)
TDC IP
Slid
e S
how
TopN
ews
Bro
adca
st W
ebS
ite
Mid
dlew
are/
Java
Elle
ctro
nic
Pro
gram
me
Gui
de E
PG
Ext
erna
l App
licat
ion
MOT
PAD
MPEG-2TS
TDC
IP Video Application BT Movio
Video Application DMBRadio Application DAB+
Bro
adca
st W
ebS
ite
Slid
e S
how
Voi
ce A
pplic
atio
ns
Mid
dlew
are/
Java
EP
G
TP
EG
Dyn
amic
Lab
el(+
)/In
telli
text
MOT
TP
EG
BT
Mov
io
Chapter 2
Chap-ter 9
Chapter 4Chapter 3 Chap- ter 9
Chapter 4
Ch
apte
r 4
Ch
apte
r 5
Ch
apte
r 5
Jour
nalin
e
Figure 1 DAB Protocol Stack
394 Appendix 3
![Page 417: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/417.jpg)
Bibliography
Standards and Related Documents
[ARIB, 1999] Association of Radio Industries and Business (1999) Narrow Band
ISDB-T for Digital Terrestrial Sound Broadcasting: Specification ofChannel coding, framing structure and modulation. Japan.
[BO.1130] ITU-R: Recommendation BO.1130�2 (1998) Systems for digital sound
broadcasting to vehicular, portable and fixed receivers forbroadcasting � satellite service (sound) in the frequency range 1400to 2700 MHz. Geneva.
[BO.789] ITU-R: Recommendation BO.789 (1994) Digital sound broadcasting tovehicular, portable and fixed receivers for broadcast satellite service(sound) in the frequency range 500 to 3000 MHz. Geneva.
[BPN 002] EBU: Intern. Techn. Document BPN 002 rev.1 (1995) DAB system:
Definition of the Ensemble Transport Interface (ETI). EBU TechnicalTexts, Geneva.
[BPN 003] EBU Intern. Techn. Document BPN 003 rev.2 (2003) Technical Basis for
T-DAB Services Network Planning and Compatibility with existingBroadcasting Services. EBU Technical Texts, Geneva.
[BPN 007] EBU: Intern. Techn. Document BPN 007 (1996) A broadcaster’s intro-
duction to the implementation of some key DAB system features �Part 1. EBU Technical Texts, Geneva.
[BPN 011] EBU: Intern. Techn. Document BPN 011 (1997) Collated PerformanceEvaluations of the Eureka 147 DAB system. EBU Technical Texts,
Geneva.[BPN 019] EBU: document BPN 019 (1999) Report on the EBU Subjective
Listening Tests of Multichannel Audio Codecs. EBU Technical Texts,
Geneva.[BPN 021] EBU: Intern. Techn. Document BPN 021 (1999). Multichannel Audio:
Report on different reproduction and delivery formats available on the
market. EBU Technical Texts, Geneva.
Digital Audio Broadcasting: Principles and Applications of DAB, DAB+ and DMB, Third Edition Edited by W. Hoeg and T. Lauterbach© 2009 John Wiley & Sons, Ltd. ISBN: 978-0-470-51037-7
![Page 418: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/418.jpg)
[BPN 022] EBU: Intern. Techn. Document BPN 022 (1999) Practical Webcasting:
The new range of opportunities for traditional broadcasters. EBUTechnical Texts, Geneva.
[BPN 030] EBU: Intern. Techn. Doc. BPN 030 (2001) Planning Parameters andReference Networks at 1.5 GHz. EBU Technical Texts, Geneva.
[BPN 035] EBU: Intern. Techn. Document BPN 035 (2001) EBU WebcastingHandbook � Web-casting, the third pillar of broadcasting. EBUTechnical Texts, Geneva.
[BPN 066] EBU: Intern. Techn. Doc. BPN 066 (2005) Guide on SFN FrequencyPlanning and Network Implementation with regard to T-DAB andDVB-T. EBU Technical Texts, Geneva.
[BPN 083] EBU: Intern. Techn. Doc. BPN 083 (2007) Broadcasting AspectsRelating to the Procedures for Coordination and Plan ConformityAgreement in the GE06 Agreement. EBU Technical Texts, Geneva.
[BS.562] ITU-R: Recommendation BS.562�3 (2000) Subjective assessment of
sound quality. Geneva. (now replaced by BS.1284)[BS.645] ITU-R: Recommendation BS.645 (1994) Test signals and metering to be
used on international sound-programme connections. Geneva.
[BS.774] ITU-R: Recommendation BS.774�2 (1997) Service requirements fordigital sound broadcasting to vehicular, portable and fixed receivers inthe VHF/UHF bands. Geneva.
[BS.775] ITU-R: Recommendation BS.775�1 (1997) Multichannel stereophonicsound system with and without accompanying picture. Geneva.
[BS.1114] ITU-R: Recommendation BS.1114�6 (2007) Systems for terrestrial digi-
tal sound broadcasting to vehicular, portable and fixed receivers in thefrequency range 30 to 3000 MHz. Geneva.
[BS.1115] ITU-R: Recommendation BS.1115 (1995) Low bit-rate audio coding.Geneva.
[BS.1116] ITU-R: Recommendation BS.1116�1 (1997) Methods for the subjectiveassessment of small impairments in audio systems including multi-chan-nel sound systems. Geneva.
[BS.1284] ITU-R: Recommendation BS.1284 (1997) Methods for the subjectiveassessment of sound quality� General requirements. Geneva.
[BS.1387] ITU-R: Recommendation BS.1387 (1998) Method for objective mea-
surements of perceived audio quality (PEAQ). Geneva.[BS.1534] ITU-R: Recommendation BS.1534 (2003) Method for the subjective
assessment of intermediate audio quality � MUSHRA (Double-
Blind MUlti Stimulus test with Hidden Reference and Anchor).Geneva.
[BS.1660] ITU-R: Recommendation BS.1660�2 (2006) Technical basis forplanning of terrestrial digital sound broadcasting in the VHF band.
Geneva.[BS.1770] ITU-R: Recommendation BS.1770–1 (2007) Algorithms to measure
audio programme loudness and true-peak audio level. Geneva.
[BS.1771] ITU-R: Recommendation BS.1771 (2006) Requirements for loudnessand true-peak indicating meters. Geneva.
[BT.1368] ITU-R: Recommendation BT.1368–7 (2007) Planning criteria for digital
terrestrial television services in the VHF/UHF bands. Geneva.[CEPT, 1995] CEPT (1995) The Final Acts of the CEPT T-DAB Planning Meeting,
Wiesbaden.
396 Bibliography
![Page 419: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/419.jpg)
[CEPT, 2002a] CEPT (2002) Final Acts of the CEPT T-DAB Planning Meeting
(WI95revMA02). Maastricht[CEPT, 2002b] CEPT (2002) Final Acts of the CEPT Multilateral Meeting for the
Frequency Band 1452 � 1479.5 MHz (MA02). Maastricht.[CEPT, 2007a] CEPT (2007) Final Acts of the CEPT T-DAB Planning Meeting
(WI95revCO07). Constant’a.
[CEPT, 2007b] CEPT (2007) Final Acts of the CEPT Multilateral Meeting for theFrequency Band 1452 � 1479.5 MHz (MA02revCO07). Constant
’a
[ECC 049] CEPT ECC: Report 049 (2004) Technical Criteria of Digital VideoBroadcasting Terrestrial (DVB-T) and Terrestrial Digital AudioBroadcasting (T-DAB) Allotment Planning. ERO, Copenhagen.
[ECC 116] CEPT ECC: Report 116 (2008) The Possibilities and Consequences ofConverting GE06 DVB-T Allotments/Assignments in Band III intoT-DAB Allotments/Assignments including Adjacent Channel Issues.ERO, Copenhagen.
[EN 300401] ETSI: EN 300 401 V1.4.1 (2006) Radio broadcasting systems: DigitalAudio Broadcasting (DAB) to mobile, portable and fixed receivers.Sophia-Antipolis.
[EN 300421] ETSI: EN 300 421 (1994) Digital broadcasting systems for television,sound and data services; Framing structure, channel coding and modula-tion for 11/12 GHz satellite systems. Sophia-Antipolis.
[EN 300429] ETSI: EN 300 429 (1994) Digital broadcasting systems for television,sound and data services; Framing structure, channel coding and modula-tion for cable systems. Sophia-Antipolis.
[EN 300468] ETSI: European Standard EN 300 468 v1.7.1 (2006) Digital VideoBroadcasting (DVB); Specification for Service Information (SI) in DVBsystems.
[EN 300744] ETSI: EN 300 744 (1996) Digital broadcasting systems for television,
sound and data services; Framing structure, channel coding and modula-tion for digital terrestrial television. Sophia-Antipolis.
[EN 300797] ETSI: EN 300797 (2005)Digital AudioBroadcasting (DAB);Distribution
interfaces; Service Transport Interface (STI). Sophia-Antipolis.[EN 300798] ETSI: EN 300 798 (1998) Digital Audio Broadcasting (DAB);
Distribution interfaces; Digital base-band In-phase and Quadrature
(DIQ) Interface. Sophia-Antipolis.[EN 300799] ETSI: ETS 300 799 1st edition (1997) Digital Audio Broadcasting (DAB);
Distribution interfaces; Ensemble Transport Interface (ETI). Sophia-
Antipolis.[EN 301234] ETSI: EN 301 234 (2006) Digital Audio Broadcasting (DAB); Multi-
media Transfer Protocol (MOT). Sophia-Antipolis.[EN 301700] ETSI: EN 301 700 (2000) Digital Audio Broadcasting (DAB); VHF/FM
Broadcasting: cross-referencing to simulcast DAB services by RDS-ODA 147. Sophia-Antipolis.
[EN 302077] ETSI: EN 302 077 V.1.1.1 (2005) Electromagnetic compatibility and
Radio spectrum Matters (ERM); Transmitting equipment for theTerrestrial – Digital Audio Broadcasting (T-DAB) service;Part 1: Technical characteristics and test methods
Part 2: Harmonised EN under article 3.2 of the R&TTE Directive[EN 302304] ETSI: EN 302 304 V1.1.1 (2004) Digital Video Broadcasting (DVB);
Transmission System for Handheld Terminals (DVB-H)
Bibliography 397
![Page 420: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/420.jpg)
[EN 302755] ETSI: EN 302 755 V1.1.1 (2008); Digital Video Broadcasting (DVB);
Frame structure channel coding and modulation for a second generationdigital terrestrial television broadcasting system (DVB-T2)
[EN 50067] ETSI: EN 50 067 (1992) Specification of the Radio Data System (RDS)for VHF/FM sound broadcasting in the frequency range from 87,5 to
108,0 MHz. Sophia-Antipolis.[EN 50248] CENELEC: EN 50 248 (2001) Characteristics of DAB receivers.
Brussels. (also published as IEC 62 105)
[EN 50255] CENELEC: EN 50 255 (1997) Digital Audio Broadcastingsystem � Specification of the Receiver Data Interface (RDI). Brussels.(also published as IEC 62104)
[EN 50320] CENELEC: EN 50 320 (2000) DCSR (DABCommand Set for Receiver).Brussels.
[ES 201735] ETSI: ES 201 735 (TS 101 735) (2000) Digital Audio Broadcasting(DAB); IP Datagram Tunnelling. Sophia-Antipolis.
[ES 201736] ETSI: ES 201 736 (2000) Digital Audio Broadcasting (DAB); NetworkIndependent Protocols for Interactive Services. Sophia-Antipolis.
[ES 201737] ETSI: ES 201 737 (TS 201 737) (2000) Digital Audio Broadcasting
(DAB); Interaction Channel through GSM/PSTN/ISDN/DECT.Sophia-Antipolis.
[ES 201980] ETSI: ES 201 980 (2008) Digtal Radio Mondiale (DRM); System
Specification. Sophia-Antipolis.[ETS 300401] ETSI: ETS 300 401 1st edition (1995) Radio broadcasting systems:
Digital Audio Broadcasting (DAB) to mobile, portable and fixed recei-
vers. Sophia-Antipolis. (now replaced by EN 300 401, see below).[H.263] ITU-T: Recommendation H.263 (1998). Video coding for low bit-rate
communication. Geneva.[IEC 13818] ISO/IEC: Publication 13818-7: Generic coding of moving pictures and
associated audio information� Part 7: Advanced Audio Coding (AAC).[IEC 14396] ISO/IEC: Publication 14496-3 (2005) Information technology � Coding
of audio-visual objects � Part 3: MPEG-4 Audio, Amendment 1:
Bandwidth extension.[IEC 60268] IEC Publ. 60268 (1991) Sound system equipment � Part 10: Peak pro-
gramme level meters; Part 17 (1990) Standard volume indicators; Part 18
(1995) Peak programme level meters � Digital audio peak level meters.Geneva.
[IEC 60958] IEC 60958�1 (1999) Digital audio interface � Part 1: General; IEC
60958�2 Part 2: Software information delivery mode; IEC 60958�3(1999) Part 3: Consumer applications; IEC 60958�4 (1999) Part 4:Professional applications.
[IEC 61937] IEC 61937 (2000) Digital audio� Interface for non-linear PCM encoded
audio bit-streams applying IEC 60958. Geneva.[IS 11172] ISO/IEC: International Standard IS 11172 (1994) Information
technology� Coding of moving pictures and associated audio for digital
storage media up to about 1.5 Mbit/s (MPEG-1). Part 1: Video; Part 3:Audio. Geneva.
[IS 13818] ISO/IEC: International Standard IS 13818 (1998) Information
technology � Coding of moving pictures and associated audio informa-tion (MPEG-2) � Part 3: Audio (MPEG-2 Layer 1, 2 and 3); Part 7:Advanced audio coding (MPEG-2 AAC). Geneva.
398 Bibliography
![Page 421: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/421.jpg)
[IS 14496] ISO/IEC: International Standard IS 14496 (1999) Information
technology � Coding of audio-visual objects (MPEG-4), Part 3 �Audio. Geneva.
[IS 23003] ISO/IEC: Internat. Standard IS 23003–1 (2007) Informationtechnology �MPEG audio technologies – Part 1: MPEG Surround
[ITU-R, 1995] ITU-R: Special Publication (1995) Terrestrial and satellite digital soundbroadcasting to vehicular, portable and fixed receivers in the VHF/UHFbands. Geneva.
[J.52] ITU-T: Recommendation J.52 (1992) Digital Transmission of High-Quality Sound-Programme Signals using one, two or three 64 kbit/sChannels per Mono Signal (and up to six per Stereo Signal). Geneva.
[P.1546] ITU-R: Recommendation P.1546-3 (2007) Method for Point-to-AreaPredictions for Terrestrial Services in the Frequency Range 30 MHz to3000 MHz. Geneva (Replaces P.370).
[P.1812] ITU-R: Recommendation P.1812 (2007) A path-specific propagation
prediction method for point-to-area terrestrial services in the VHF andUHF bands. Geneva.
[P.370] ITU-R: Recommendation P.370�7 (1998) VHF and UHF Propagation
Curves for the Frequency Range from 300 MHz to 1000 MHz. Geneva.(Now replaced by P.1546)
[R68] EBU: Technical Recommendation R68�1992 (1992) Alignment level in
digital audio production equipment and in digital audio recorders. EBUTechn. Texts, Geneva.
[R96] EBU: Technical Recommendation R96�1999 (1999) Formats for pro-
duction and delivery of multichannel audio programmes. EBU Techn.Texts, Geneva.
[RFC 1952] GZIP file format specification � v4.3. (1996).[RFC 761] RFC 761 (1980): DOD standard; Transmission Control Protocol.
[RFC 791] RFC 791 (1981): Internet Protocol (IP); Darpa Internet Program;Protocol Specification, J. Postel
[RFC 793] RFC 793 (1981): Transmission Control Protocol (TCP); Darpa Internet
Program; Protocol Specification, J. Postel[RP 173] SMPTE (1991) Proposed Recommended Practice RP 173: Loudspeaker
Placements for Audio Monitoring in High Definition Electronic
Production.[RP 200] SMPTE (1998) Proposed Recommended Practice RP 200: Channel
Assignments and Levels on Multichannel Audio Media
[RRC06, 2006] ITU-R (2006) Final Acts of the Regional RadiocommunicationConference for Planning of the Digital Terrestrial Broadcasting Servicein Parts of Regions 1 and 3, in the Frequency Bands 174� 230MHz and470 � 862 MHz (RRC-06). Geneva
[Tech3317] EBU: Techn. Document Tech 3317 2nd ed. (2007) Planning Parametersfor Hand Held Reception. EBU Technical Texts, Geneva.
[Tech3253] EBU: Techn. Document Tech 3253 (1988) SQAM � sound quality
assessment material: recordings for subjective tests (including theSQAM Compact Disc). EBU Technical Texts, Geneva.
[Tech3324] EBU: Technical doc. Tech 3324 (2007) Evaluations of Multichannel
Audio Codecs. EBU Techn. Document, Geneva.[TR 101495] ETSI: TR 101 495 (2006) DAB; Guide to standards, guidelines and
bibliography. Sophia-Antipolis.
Bibliography 399
![Page 422: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/422.jpg)
[TR 101496] ETSI: TR 101 496 (2001) Digital Audio Broadcasting (DAB):
Guidelines and rules for implementation and operation; Part 1:System outline; Part 2: System features; Part 3: Broadcast network.Sophia-Antipolis.
[TR 101497] ETSI: TR 101 497 (2002) Digital Audio Broadcasting (DAB): Rules of
operation for theMultimedia Object Transfer Protocol.Sophia-Antipolis(now replaced by EN 301 234).
[TR 101758] ETSI: TR 101 758 (2000) Digital Audio Broadcasting (DAB): DAB
signal strength and receiver parameter; Targets for typical operation.Sophia-Antipolis.
[TR-004] EACEM: TR-004 (2000) Application of the EMCDirective 89/336/ EEC
for Digital Audio Broadcast receivers.[TS 101498] ETSI: TS 101 498 (2006) Digital Audio Broadcasting (DAB):
Broadcast Web Site; Part 1: User application specification. Sophia-Antipolis.
[TS 101499] ETSI: TS 101 499 (2006) Digital Audio Broadcasting (DAB): MOT SlideShow; User application specification. Sophia-Antipolis.
[TS 101735] ETSI: TS 101 735 (2000) Digital Audio Broadcasting (DAB); Internet
Protocol (IP) Datagram Tunnelling. Sophia-Antipolis.[TS 101736] ETSI: TS 101 736 (2000) Digital Audio Broadcasting (DAB); Network
Independent Protocols for Interactive Services. Sophia-Antipolis.
[TS 101737] ETSI: TS 101 737 (2000) Digital Audio Broadcasting (DAB); DABInteraction Channel through GSM/PSTN/ISDN/DECT. Sophia-Antipolis.
[TS 101756] ETSI: TS 101 756 (2006) Digital Audio Broadcasting (DAB); RegisteredTables. Sophia-Antipolis.
[TS 101757] ETSI: TS 101 757 (2000) Digital Audio Broadcasting (DAB);Conformance Testing for DAB Audio. Sophia-Antipolis.
[TS 101759] ETSI: TS 101 759 (2005) Digital Audio Broadcasting (DAB);Transparent Data Channel. Sophia-Antipolis.
[TS 101860] ETSI: TS 101 860 (2001) Digital Audio Broadcasting (DAB);
Distribution Interfaces; Service Transport Interface (STI); STI levels.Sophia-Antipolis.
[TS 101980] ETSI: TS101 980 (2001) Digital Radio Mondiale (DRM); System
Specification. Sophia-Antipolis (now replaced by ES 201 980).[TS 101993] ETSI: TS 101 993 (2002) Digital Audio Broadcasting (DAB); A Virtual
Machine for DAB; DAB Java Specification. Sophia-Antipolis.
[TS 102 818] ETSI: TS 102 818 (2008) � Digital Audio Broadcasting (DAB); XMLSpecification for DAB Electronic Programme Guide (EPG). Sophia-Antipolis.
[TS 102 979] ETSI: Techn. Specification TS 102 979 V1.1.1 (2008) Digital Audio
Broadcasting DAB); Journaline; User application specification.[TS 102367] ETSI: Techn. Specification TS 102 367 (2006) Digital Audio
Broadcasting DAB; Conditional access.
[TS 102371] ETSI: Techn. Specification TS 102 371 v1.3.1 (2008) Digital AudioBroadcasting (DAB); Digital Radio Mondiale (DRM); Transportationand Binary Encoding Specification for Electronic Programme Guide
(EPG).[TS 102427] ETSI: Techn. Specification TS 102 427 v1.1.1 (2005) Digital Audio
Broadcasting (DAB); Data Broadcasting – MPEG-2 TS streaming.
400 Bibliography
![Page 423: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/423.jpg)
[TS 102428] ETSI: Techn. Specification TS 102 428 v1.1.1 (2005) Digital Audio
Broadcasting (DAB); DMB video service; User ApplicationSpecification.
[TS 102563] ETSI: Techn. Specification TS 102 563 (2007). Digital Audio Broadcasting(DAB); Transport of Advanced Audio Coding (AAC) audio.
[TS 102652] ETSI: Techn. Specification TS 102 652 (2007) Digital AudioBroadcasting (DAB); Intellitext; Application specification.
[TS 102818] ETSI: Techn. Specification TS 102 818 v1.4.1 (2008) Digital Audio
Broadcasting (DAB); Digital Radio Mondial (DRM); XMLSpecification for Electronic Programme Guide (EPG).
[TS 102978] ETSI: Techn. Specification TS 102 978 v1.1.1 (2008) Digital Audio
Broadcasting (DAB); IPDC Services; Transport specification.[TS 102980] ETSI: Techn. Specification TS 102 980 V1.1.1 (2008) Digital Audio
Broadcasting (DAB); Dynamic Label Plus (DL Plus); Applicationspecification.
[UECP] EBU RDS Forum: SPB 490 (1997) RDS Universal EncoderCommunication Protocol (UECP). Geneva.
Key
BO. ITU-R Recommendation (Satellite sound and television broadcasting)BPN EBU: Internal Technical Document (informative)BR. ITU-R Recommendation (Sound and television recording)
BS. ITU-R: Recommendation (Sound broadcasting)EN ETSI or CENELEC European Telecommunication Standard (normative)ES ETSI: European Standard (normative)
IS ISO/IEC: International Standard (normative)P. ITU-R Recommendation (Radiowave propagation)R EBU: Technical RecommendationTech EBU: Technical Document (informative)
TR ETSI: Technical Report (informative)TS ETSI: Technical Specification (normative)
Publications
[AES, 1996] AES Special publication: Gilchrist, N. H. C. and Grewin, C. (eds.)(1996) Collected papers on digital audio bit-rate reduction, AES, NewYork
[AES, 2002] AES (2002) Perceptual Audio Coders: What to Listen For. Educational/tutorial CD-ROM. AES Technical Council, New York
[Aigner, 2002] Aigner, R. et al. (2002) Advancement of MEMS into RF-FilterApplications, IEDM 2002, Technical Digest, Session 36
[Amor, 1996] Amor, H. (1996) Die Rolle von DAB in der zukunftigen digitalenRundfunk- und Kommunikationslandschaft. In: T. Lauterbach, DigitalAudio Broadcasting, Franzis-Verlag, Feldkirchen.
[ARD, 1994] ARD-Pflichtenheft 5/3.8 Teil 1 (1994) RDS Transmission Protocol:Coder fur Radiodatensystem (RDS) � Zusatzinformationen fur denHorrundfunk gemaß DIN EN 50 067. Institut fur Rundfunktechnik,
Munchen
Bibliography 401
![Page 424: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/424.jpg)
[Bauer, 1997] Bauer, S. and Schmale, B. (1997) Video transmission over DAB/DMB as
an application for the MPEG-4 main profile ITG-Fachbericht[Benedetto, 1999] Benedetto, S. and Biglieri, E. (1999) Principles of digital transmission,
Plenum, New York[BMCO, 2007] BMCO Forum (2007) Mobile Broadcast Technologies � Link Budgets.
Berlin[Bolle, 1997] Bolle, M. (1997) Verfahren zur automatischen Frequenzkorrektur in
Mehrtragerubertragungsverfahren, Pat. DE 4 441 566
[Bolle, 1998] Bolle, M. et al. (1998) Architecture and Performance of an AlternativeDAB Receiver Chipset. IEEE VLSI Conference, Honolulu
[Bosch, 1999] Bosch (1999) Research Info, No. IV/1999, Hildesheim
[Bosi, 1997] Bosi, M., Brandenburg, K. et al. (1997) ISO/IEC MPEG-2 AdvancedAudio Coding. Journ. AES, Vol. 45, No.10.
[Bossert, 1998] Bossert, M. (1998) Kanalcodierung, 2nd edition, Teubner-Verlag,Stuttgart
[Bossert, 1999] Bossert, M. (1999) Channel coding for telecommunications. John Wiley &Sons Ltd, Chichester.
[Breebaart, 2005] Breebaart, J., Herre, J. et al. (2005) MPEG Spatial Audio Coding /
MPEG Surround: Overview and Current Status. 119th AESConvention, New York.
[Brugger, 2003] Brugger, R. and Hemingway, D. (2003) OFDM Receivers � Impact on
Coverage of Inter-Symbol Interference and FFT Window Positioning.EBU Tech. Rev. 295, Geneva .
[Brugger, 2005] Brugger, R. and Mayer, K. (2005) RRC-06 � Technical Basis and
Planning Configurations for T-DAB and DVB-T. EBU Tech. Rev. 302,Geneva
[CCIR, 1991] CCIR (1991) Study Group 10: Question ITU-R 84�1/10: Sound systemsfor the hearing impaired; and CCIR TaskGroup 10/1�41: Extra channelsuited to hearing impaired people. Geneva.
[Chambers, 1992] Chambers, J. P. (1992) DAB system multiplex organisation. Proc. 1stEBU International Symposium on Digital Audio Broadcasting, Mon-
treux.[Chang, 2003] Chang, S.-G., Ha, V. H. S., Zhang, Z.-M. and Kim, Y.-J. (2003)
Performance evaluation of Eureka 147 with RS (204,188) code for mobile
multimedia broadcasting, SPIE’s Visual Communications and ImageProcessing.
[Cho, 2003] Cho, Th. et al. (2003) A 2.4GHzDual-Mode 0.18 �mCMOSTransceiver
for Bluetooth and 802.11b, ISSCC 2003, Digest of Technical Papers,Paper 5.2
[Cho, 2007] Sammo Cho, GwangSoon Lee, Byungjun Bae, KyuTae Yang, Chung-Hyun Ahn, Soo-In Lee and Chiteuk Ahn (2007) System and Services of
Terrestrial Digital Multimedia Broadcasting (T-DMB). IEEETransactions on Broadcasting Vol. 53, No. 1, Part 2.
[Clark, 1988] Clark, G. C. and Cain, J. B. (1988) Error-Correction Coding for Digital
Communications, Plenum, New York[Clawin, 1998] Clawin, D. et al. (1998) Architecture and Performance of an Alternative
DAB Receiver Chip Set. Proc. 28th European Microwave Conference,
Amsterdam, Vol. 2.[Clawin, 2000] Clawin, D., Gieske, K., Hofmann, F., Kupferschmidt, C., Mlasko,
T., Naberfeld, F., Passoke, J., Spreitz, G. and Stepen, M. (2000)
402 Bibliography
![Page 425: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/425.jpg)
D-FIRE 2: A combined DAB/FM receiver system on chip. MicroTec
2000, Hanover[COST 207] COST 207 (1989) Digital land mobile radio communications. Final
report, Office for Official Publications of the European Communities,Luxembourg.
[Culver, 1996] Culver, R. D. (1996). Report of the Field Test Task Group. ConsumerElectronics Manufacturers Association, Washington, DC
[David, 1996] David, K. and Benkner, Th. (1996) Digitale Mobilfunksysteme,
Teub-ner-Verlag, Stuttgart[Dehery, 1991] Dehery, Y. F., Stoll, G. and van de Kerkhof, L. (1991) MUSICAM
Source Coding for Digital Sound. Symposium Record ‘Broadcast
Sessions’ of the 17th International Television Symposium. Montreux.[Diamond, 2001] DIAMOND (Dialogue on Managerial Development for Women and
Men) EU Project (2001) Multimedia ITS services through digital radio,Brochure of the Diamond project. Brussels
[Dietz, 2000] Dietz, M. and Mlasko, T. (2000) Using MPEG-4 audio for DRM digitalnarrowband broadcasting. Proc. IEEE Circuits & Systems Conference2000
[DSB, 2002] ITU-R: DSB Handbook (2002) Terrestrial and Satellite Digital SoundBroadcasting to Vehicular, Portable and Fixed Receivers in VHF/UHFBands. ITU, Geneva.
[EBU, 1999] EBU document: B/CASE 100/BMC 477 (1999) Subjective Audio QualityAchievable at Various Bit-rates forMPEG-Audio Layer II and Layer III.European Broadcasting Union, Geneva
[Emmett, 1994] Emmett, J. R. and Girdwood, C. (1994). ‘Programme loudness metering’AES UK Conference ‘Managing the bit budget’, Conference digest.
[Etz, 2003] Etz, G. and Burton, P. (2003) A CMOS Up-Conversion Receiver Front-End For Cable and Terrestrial DTV Applications, ISSCC 2003, Digest
of Technical Papers, Paper 25.2[Fastl, 1977] Fastl, H. (1977) Temporal Masking Effects: II. Critical Band Noise
Masker. Acustica Vol. 36.
[Fettweis, 1986] Fettweis, A. (1986) Wave Digital Filters � Theory and Practice. Proc.IEEE, Vol. 25, No.2, 270�326
[Frieling, 1996] Frieling, G., Lutter, F. J. and Schulze, H. (1996) Bit error measurements
for the assessment of a DAB radio supply. Rundfunktech. Mit-teilungen,Vol. 40, No. 4.
[Gilchrist, 1994] Gilchrist, N. H. C. (1994) EUREKA 147: Tests of the error performance
of the DAB system. BBC Research & Development Report No. 1994/18[Gilchrist, 1998] Gilchrist, N. H. C. (1998) Audio levels in digital broadcasting. 105th AES
Convention, San Francisco, Preprint 4828[Goldfarb, 1998] Goldfarb, M., Croughwell, R., Schiller, C., Livezey, D. and Heiter
G. (1998) A Si BJT IF Downconverter AGC IC for DAB. Digest of1998 IEEE MTT-S International Microwave Symposium, Baltimore,Vol. 1.
[Green, 1992] Green, J. A. (1992) Building Penetration Loss Measurements forDAB Signals at 211 MHz. BBC Research Department Report BBCRD 1992/14
[Grosskopf, 1987] Grosskopf, R. (1987) Comparison of different methods for the predic-tions of the field strength in the VHF-range, IEEE Trans. on Antennasand Prop. 35. no. 7.
Bibliography 403
![Page 426: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/426.jpg)
[Grosskopf, 1988] Grosskopf, R. (1988) Comparison of field-strength prediction methods
in the UHF range, EBU Review, Vol. 229.[Grube, 2001] Grube, M., Siepen, P., Mittendorf, C., Boltz, M. and Srinivasan, M.
(2001) Application of MPEG-4: digital multimedia broadcasting. IEEETrans. Consumer Electronics.
[Hagenauer, 1988] Hagenauer, J. (1988) Rate compatible punctured convolutional RCPCcodes and their applications, IEEE Trans. Commun. COM-36.
[Hallier, 1994] Hallier, J., Lauterbach, T., Unbehaun, M. (1994) Multimedia
Broadcasting to mobile, portable and fixed receivers using theEureka 147 Digital Audio Broadcasting System. Proc. 5th IEEEInternational Symposium on Personal, Indoor and Mobile Radio
Communications Wireless Networks, Den Haag.[Hallier, 1994a] Hallier, J. et al. (1994) Preparing Low-Cost ICs for DAB: The
JESSI-DAB Programme. Proc. 2nd International Symposium. onDAB. Toronto
[Hallier, 1994b] Hallier, J., Lauterbach, Th. and Unbehaun, M. (1994) Multimediabroadcasting to mobile, portable and fixed receivers using theEureka 147 Digital Audio Broadcasting System. Proc. ICCC Regional
Meeting on Wireless Computer Networks (WCN), Den Haag, 794[Hallier, 1995] Hallier, J., Lauterbach, Th. and Unbehaun, M. (1995) Bild- und Video-
ubertragung uber DAB� Ein erster Schritt zumMultimedia-Rundfunk,
ITG-Fachbericht 133 Horrundfunk, VDE-Verlag, Berlin.[Hata, 1980] Hata, M. (1980) Empirical formula for propagation loss in land mobile
radio services. IEEE Trans. Veh. Tech., Vol. 29, No. 3.
[Herold, 1988] Herold, E. W. (1988) Audio for the elderly. J. Audio Eng. Soc. Vol. 36,No. 10
[Herre, 2007] Herre, J., Disch, S., Hilpert, J., Hellmuth, O. (2007) From SAC toSAOC � Recent developments in parametric coding of spatial audio.
AES 22th UK Conference, London[Herrmann, 2007] Herrmann, F., Erismann, L. A. and Prosch, M. (2007) The evolution of
DAB. EBU Tech. Rev., July 2007.
[Hoeg, 1994] Hoeg, W., Gilchrist, N., Twietmeyer, H. and Junger, H. (1994) DynamicRange Control (DRC) and Music/Speech Control (MSC) as additionaldata services for DAB. EBU Techn. Rev. Vol. 261.
[Hoeg, 1996] Hoeg, W. and Grunwald, P. (1996) Visual monitoring of multi-channel audio signals. 100. AES Convention, Copenhagen, Preprint4178
[Hoeg, 1997] Hoeg, W., Feiten, B., Steinke, G., Feige, F. and Schwalbe, R. (1997)Tonubertragungssystem fur Horgeschadigte (Sound broadcasting sys-tem for the Hearing impaired). Report Deutsche Telekom Technolo-giezentrum, Berlin
[Hoeher, 1991a] Hoeher, P. (1991) TCM on frequency-selective land-mobile fading chan-nels. Proc. 5th Tirrenia Int. Workshop on Digital Communication
[Hoeher, 1991b] Hoeher, P., Hagenauer, J., Offer, E., Rapp, C. and Schulze, H. (1991)
Performance of an RCPC-coded OFDM-based Digital AudioBroadcasting (DAB) System, Proc. IEEE Globecom 1991 ConferenceVol.1, 2.1.1�2.1.7
[Hofmann, 2003] Hofmann, F., Hansen, C., Schafer, W. (2003) Digital Radio Mondiale(DRM) – Digital sound broadcasing in the AM bands. IEEETransactions on Broadcasting, Vol. 49, No.3.
404 Bibliography
![Page 427: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/427.jpg)
[Hofmeier, 1995] Hofmeier, St. (1995) Der Countdown fur das digitale Astra-Radio lauft.
Funkschau, Vol. 2.[Ilmonen, 1971] Ilmonen, K. (1971) Listener preferences for loudness balance of broad-
casts, with special consideration to listening in noise. Research Reportfrom Finnish Broadcasting Company, Helsinki, no. 12/1971
[Imai, 1977] Imai, H. and Hirakawa, S. (1977) A new multilevel coding method usingerror correcting codes. IEEE Trans. Inf. Theory IT-23.
[IRT, 1998] Institut fur Rundfunktechnik (1998) Empfehlung 14 KSZH Funkhaus-
telegramme � Aufbau und Anwendung. Munich[IRT, 1999] Institut fur Rundfunktechnik (1999) Multimedia Object Transfer
Protocol � Interface. Munich
[ITTS, 1994] Interactive Text Transmission System, EACEM Tech. Doc. no. 7[Joachim, 2008] Joachim, G. (2008) HD Radio Global Update. Proc. 9th Workshop
Digital Broadcasting, Erlangen.[Johnson, 2003] Johnson, S. A. (2003) The structure and generation of robust waveforms
for AM In Band on Channel Digital Broadcasting. Available fromhttp://www.iBiquity.com
[Jongepier, 1996] Jongepier, B. (1996) The JESSI DAB Chipset. Proc. AES UK DAB
Conference, London.[Kammeyer, 2008] Kammeyer, K.-D. (2008) Nachrichtenubertragung, 4th ed., Teubner-
Verlag. Stuttgart
[Kerck] Kerckhoffs’ Principle, http://en.wikipedia.org/wiki/Kerckhoffs%27_law[Kilian, 2005] Gerd Kilian, Schlussbericht fur das Vorhaben RadioMondo, Fraunhofer-
Institut fur Integrierte Schaltungen, 16.6.2005. (www.iis.fhg.de)
[Kleine, 1995] Kleine, G. (1995) Astra Digital Radio. Funkschau Vol. 10, No. 44[Klingenberg, 1998] Klingenberg, W. and Neutel, A. (1998) MEMO: A Hybrid DAB/
GSM Communication System for Mobile Interactive MultimediaServices. In: Multimedia Applications, Services and Techniques �Proc. ECMAST ’98, Springer-Verlag, Berlin 1998 (Lecture Notes inComputer Science, vol. 1425)
[Kopitz, 1999] Kopitz, D. and Marks, B. (1999) Traffic and travel information broad-
casting� protocols for the 21st century,EBUTechn. Rev. Vol. 279, No. 1[Korte, 1999] Korte, O. and Prosch, M. (1999) Packet Mode Inserter: Konzepte zur
Realisierung eines Multimedia Datenservers fur den digitalen Rund-
funk. Fraunhofer Institut fur Integrierte Schaltungen, Erlangen[Kowalski, 1999] Kowalski, H. and Kalkbrenner, E. (1999) Fernsehen im Zug � Ein
Digital Multimedia Broadcasting (DMB) � Pilotprojekt bei der DB
AG. Eisenbahntechnische Rundschau.[Kozamernik, 1992] Kozamernik, F. (1992) Digital Sound Broadcasting Concepts. Proc.
Europe Telecom ’92, Budapest[Kozamernik, 1995] Kozamernik, F. (1995) Digital Audio Broadcasting � radio now and for
the future. EBU Techn. Rev.[Kozamernik, 1999] Kozamernik, F. (1999). Digital Audio Broadcasting� coming out of the
tunnel. EBU Techn. Rev. Vol. 279
[Kozamernik, 2002] Kozamernik, F. (2002). A snapshot of the EBU’s webcasting activities.EBU Techn. Rev. Vol. 291
[Kozamernik, 2005] Kozamernik, F. and Muliane, M. (2005) An Introduction to Internet
Radio. EBU Techn. Rev., Geneva.[Kozamernik, 2006] Kozamernik, F. and de Giorgi, M. (2006) Prix Europa — results of the
2006 media streaming trial. EBU Tech. Rev., Geneva.
Bibliography 405
![Page 428: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/428.jpg)
[Kuroda, 1997] Kuroda, T. et al. (1997) Terrestrial ISDB System using Band Segmented
Transmission Scheme. NHK Laboratories note no. 448[Lauterbach, 1996] Lauterbach, Th., Stierand, I., Unbehaun, M. and Westendorf, A. (1996)
Realisation of Mobile Multimedia Services in Digital AudioBroadcasting (DAB), Proc. European Conference on Multimedia
Applications, Services and Techniques, Part II.[Lauterbach, 1997a] Lauterbach, Th., Unbehaun, M., Angebaud, D., Bache, A., Groult,
Th., Knott, R., Luff, P., Lebourhis, G., Bourdeau, M., Karlsson, P.,
Rebhan, R. and Sundstrom, N. (1997) Using DAB and GSM toprovide Interactive Multimedia Services to Portable and MobileTerminals. In: Serge Fdida and Michele Morganti (eds) Multimedia
Applications, Services and Techniques, Proc. ECMAST, Milan,Springer-Verlag, Berlin
[Lauterbach, 1997b] Lauterbach, Th. and Unbehaun,M. (1997)Multimedia Environment forMobiles (MEMO) � Interactive Multimedia Services to Portable and
Mobile Terminals, ACTS Mobile Communications Summit, Aalborg,Vol. II, 581
[Lauterbach, 1997c] Lauterbach, Th. (1997) DAB/DMB: Der neue digitale terrestrische
Multimedia-Rundfunk. telekom praxis, H. 5/97.[Layer, 1998] Layer, F., Englert, T., Friese, M. and Ruf, M. (1998) Locating Mobile
Receivers using DAB Single Frequency Networks. Proc. 3rd ACTS
Mobile Communication Summit, Rhodos.[Le Floch, 1992] Le Floch, B. (1992) Channel Coding andModulation for DAB. Proc. 1st
International Symposium on DAB, Montreux.
[Lee, 2005] Lee, G., Cho, S., Yang, K.-T., Hahm, Y. K. and Lee, S. I. (2005)Development of terrestrial DMB transmission system based onEureka 147 DAB. IEEE Trans. Consumer Electronics, Vol. 51, No. 1.
[Lee, 2007] Lee-Youngjin; Lee-SangWoon; Kim-Yong-Han; Lee-Soo-In; Yim-
Zung-Kon; Choi- ByungHo; Kim-Sangjin; Seo-Jong-Soo (2007) Fieldtrials for terrestrial digital multimedia broadcasting system. IEEETransactions on Broadcasting Vol. 53, No. 1.
[Lever, 1996] Lever, M., Richard, J. and Gilchrist, N. H. C. (1996) Subjective assess-ment of the error performance of the DAB system, including tests at 24kHz audio sampling frequency. BBC Research & Development Report
No. 1996/7.[Lever, 1997] Lever, M., Richard, J. and Gilchrist, N. H. C. (1997) Subjective assess-
ment of the error performance of the Eureka 147 DAB system. 102nd
AES Convention, Munich, Preprint 4483[Liu, 2000] Liu, E. et al. (2000) A 3VMixed-Signal Baseband Processor IC for IS-95.
ISSCC 2000, Digest of Technical Papers[Marks, 2000] Marks, B. (2000) TPEG applications, compatible with RDS-TMC,
give greater richness and wider content. 2nd WorldDABMultimedia Conference, London (available electronically at [www.worlddab] only)
[Mason, 2004] Mason, S. (2004) Indoor Reception of DAB � Consequences forPlanning and Implementation. EBU Tech. Rev. Vol. 299, Geneva.
[Mathers, 1991] Mathers, C. D. (1991). A study of sound balances for the hard of hearing.
BBC Research Department Report BBC RD 1991/3[Meares, 1998] Meares, D. J. and Theile, G. (1998) Matrixed Surround Sound in an
MPEG Digital World. J. AES Vol. 46, No. 4.
406 Bibliography
![Page 429: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/429.jpg)
[Meltzer, 2002a] Meltzer, S., Bohm, R. and Henn, F. (2002) SBR enhanced audio codecs
for digital broadcasting such as ‘Digital Radio Mondiale’ (DRM). 112thConvention AES, Munich
[Meltzer, 2002b] Meltzer, S. andDietz, M. (2002) Audio Coding: CT-aacPlus� a state-of-the-art audio coding system. EBU Tech. Review.
[Meltzer, 2006] Meltzer, S. andMoser, G. (2006) AudioCompression:MPEG-4HE-AACv2 – audio coding for today’s digital media world.EBUTech. Review.
[Michler, 1998] Michler, O. and Stry, M. (1998) DAB-Indoor-Versorgung im L-Band,
Schriftenreihe der SLM, Band 6, Vistas, Berlin[Miyasaka, 1996] Miyasaka, E. et al. (1996) A new approach to compensate degeneration
of hearing intelligibility for elderly listeners. 100. AES-Convention,
Amsterdam, Preprint 4217[Moon, 2005] Moon, T. K. (2005) Error correction coding: mathematical methods and
algorithms, John Wiley & Sons, Hoboken, New Jersey.[Muller, 1970] Muller, K. (1970) What dynamic range does the listener wish to have?
EBU Rev. 124-A.[Nakahara, 1996] Nakahara, S. et al. (1996) Efficient Use of Frequencies in Terrestrial
ISDB System. IEEE Trans. Broadcast. Vol. 42, No. 3.
[Nowottne, 1998] Nowottne, H.-J., Heinemann, C., Peters, W. and Tumpfel, L. (1998)DAB-Programmzufuhrung � Neue Anforderungen und ihre Realisier-ung.Proc. 13th International Scientific Conference, Mittweida, Germany,
D, 41�48[O’Leary, 2006] O’Leary, T., Puigrefagut, E. and Sami, W. (2006) GE06 � Overview of
the Second Session (RRC-06) and the Main Features for Broadcasters.
EBU Tech. Rev. 308, Geneva.[Okumura, 1968] Okumura, Y., E. Ohmori, T. Kawano and K. Fukuda (1968) Field
strength and its variability in VHF and UHF land-mobile service. Rev.Elec. Comm. Lab. 16, (9�10), 825�873
[OMA] OMA DRM v2.0 Extensions for Broadcast Support’, Open MobileAlliance.
[Paiement, 1996] Paiement, R. (1996) Description and early measurement results: experi-
mental distributed emission DSB network at L-Band. Document sub-mitted to ITU-R WP 10B (doc. 10B/16), Toledo
[Paiement, 1997] Paiement, R. (1997) Update and further results, experimental DSB sys-
tem at L-Band. Document submitted to ITU-R WP 10B (doc. 10B/ 41).Geneva
[Par, 1994] Van de Par, S. (1994) On 2 1/2-channel sound compared to three-channel
sound. J. AES Vol. 42.[Peters, 1999] Peters, W., Nowottne, H.-J., Madinger, R., Sokol, P. and Tumpfel, L.
(1999) DAB-Programmzufuhrung im Regelbetrieb � Realisierung mitdem neuen Standard STI. ITG Fachbericht 158, Fachtagung Horrund-
funk, Cologne.[Peyla, 2003] Peyla, P. J. (2003) The structure and generation of robust waveforms for
FM In-Band on-Channel Digital Broadcasting. Available from
http://www.iBiquity.com[Plenge, 1991] Plenge, G. (1991) DAB � Ein neues Horrundfunksystem. Rundfunktech.
Mitteilungen, 45
[Proakis, 2008] Proakis, J. G. (2008)Digital Communications. 5th ed.,McGraw-Hill, NewYork
[Reimers, 1995] Reimers, U. (1995) Digitale Fernsehtechnik, Springer-Verlag, Berlin
Bibliography 407
![Page 430: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/430.jpg)
[Riley, 1994] Riley, J. L. (1994). The DAB Multiplex and system support features.
EBU Tech. Rev. Vol. 259, No. 11[Sachdev, 1997] Sachdev, D. K. (1997) The World Space System: Architecture, Plans and
Technologies. Proc. 51st NAB Conference, Las Vegas, 131[Schambeck, 1987] Schambeck, W. (1987) Digitaler Horfunk uber
Satelliten. In: Pauli, P. (ed.) Fernseh- und Rundfunk-Satellitenempfang,Expert-Verlag, Ehningen b. Boblingen, S. 145�177
[Schiphorst, 2008] Schiphorst, R., Jordy Potman, K. L. Hofstra, H., Cronie, S. and Slump,
C. (2008) RF Performance of T-DAB Receivers, IEEE Transactions onBroadcasting Vol. 54, No. 2.
[Schneeberger, 1996] Schneeberger, G. (1996) Datendienste mit DAB. Schriftenreihe der
DAB-Plattform e.V., H. 18, Munchen.[Schramm, 1996] Schramm, R. (1996) Building Penetration Loss Measurements in the
VHF and UHF Frequency Band, Institut fur Rundfunktechnik, Tech-nischer Bericht Nr. B 153/96
[Schramm, 1997] Schramm,R. (1997) Pseudo channel bit error rate as an objective factor forthe assessment of the supply withDAB signals.EBUTech. Rev. Vol. 274
[Schulze, 1995] Schulze, H. (1995) Codierung, Interleaving und Multiplex-Diversity bei
DAB: Auswirkungen auf die Rundfunkversorgung, ITG Fachbericht 135Mobile Kommunikation
[Schulze, 1998] Schulze, H. (1998) Moglichkeiten und Grenzen des Mobilempfangs von
DVB-T, 3. OFDM-Fachgesprach, Braunschweig[Schulze, 1999] Schulze, H. (1999) The Performance of a Coded Multicarrier 64-QAM
System with Channel Estimation, Proc. 1st International OFDM-
Workshop, Hamburg[Schulze, 2005] Schulze, H. and Luders, C. (2005) Theory and Application of OFDM
and CDMA�WidebandWireless Communications, JohnWiley & SonsLtd, Chichester.
[Sicre, 1994] Sicre J. L. et al. (1994) Preparing Low-Cost ICs for DAB: TheJESSI-DAB Programme. Proc. 2nd International Symposium onDAB, Toronto
[Sieber, 2004] Sieber, A. and Weck, C. (2004) What’s the difference between DVB-Hand DAB � in the mobile environment? EBU Tech. Rev., Geneva
[Siegle, 1996] Siegle, G. (1996) DAB und Bewegtbild. Radio, Fernsehen, Elektronik 45
Heft 6.[Skjold, 2006] Skjold, D. (2006) An economic analysis of DAB & DVB-H. EBU Tech.
Rev., Geneva
[Smith, 1989] Smith, A. B. and Snyder, C. D. (1989) How the audio quality depends onthe bit rate. J. AES Vol. 45
[Soulodre, 1998] Soulodre, G., Grusec, T., Lavoie, M., Thibault, L. (1998) SubjectiveEvaluation of State-of-the-Art 2-Channel Audio Codecs. 104th AES
convention, Amsterdam[Steil, 2008] Steil, A., Schad, F., Feilen, M. and Hedrich, E. (2008) DRMþ Field
Trial: Concept, Setup, and First Results, Proc. 9th Workshop Digital
Broadcasting, Erlangen[Stoll, 1995] Stoll, G. (1995) Audio compression schemes used in DAB: TheMPEG-1
and MPEG-2 Audio Layer II coding standard for two- and multi-chan-
nel sound. Proc. EBU/EuroDab In-depth Seminar on DAB, Montreux[Stoll, 2000] Stoll, G. and Kozamernik, F. (2000) EBU Listening tests on Internet
audio codecs. EBU Techn. Rev. Vol. 283
408 Bibliography
![Page 431: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/431.jpg)
[Stoll, 2002] Stoll, G. and Kain, C. (2002) DAB and Layer II plus: A Compatible
Solution for the Increasing Number of Programmes in DAB?ConventionReport, 22nd Tonmeistertagung, Hanover
[Stott, 1996] Stott, J. H. (1996) The DVB terrestrial (DVB-T) specification and itsimplementation in a practical modem. International Broadcasting
Convention, Conference Publication, no. 428[Stott, 2001] Stott, J.H. (2001) DRMkey technical features.EBUTechn. Rev. Vol. 286[Strange, 2000] Strange, J. and Atkinson, S. (2000) A Direct Conversion Transceiver for
Multi-Band GSM Application, RFIC Symposium 2000, Digest ofTechnical Papers, Boston
[STRL, 1999] NHK Science and Technical Research Laboratories (1999) STRL
Newsletters[Su, 2002] Su, D. et al. (2002) A 5 GHz CMOS Transceiver for IEEE 802.11a
Wireless LAN, ISSCC 2002, Digest of Technical Papers, Paper 5.4[Taddiken, 2000] Taddiken, et al. (2000) Broadband Tuner on a Chip for Cable Modem,
HDTV, and Legacy Analog Standards.RFIC Symposium 2000, Digest ofTechnical Papers, Boston
[TEMIC, 1999] U2731B Data-Sheet (1999) TEMIC-Semiconductor GmbH. Heilbronn
[ten Kate, 1992] ten Kate, W., Boers, P., Makivirta, A., Kuusama, J., Christensen, K.-E.and Sørensen, E. (1992) Matrixing of Bit rate Reduced Signals. Proc.ICASSP, Vol. 2.
[Theile, 1993] Theile, G. and Link,M. (1993) Low-complexity Dynamic Range Controlsystem based on scale-factor weighting. 94th Convention AES, Berlin,Preprint 3563
[Thiede, 2000] Thiede, Th., Treurniet, W. C., Bitto, R., Schmidmer, C., Sporer, T.,Beerends, J., Colomes, C., Keyhl, M., Stoll, G., Brandenburg, K. andFeiten, B. (2000) PEAQ-The ITU Standard for Objective Measurementof Perceived Audio Quality, Journal of the AES, Vol. 48 (1/2)
[Titus, 1998] Titus, W., Croughwell, R., Schiller, C. and DeVito, L. (1998) A Si BJTDual Band Receiver IC for DAB. Digest of 1998 IEEE MTT-SInternational Microwave Symposium, Baltimore, USA, Vol. 1
[U2731B] U2731B Data-Sheet, TEMIC-Semiconductor GmbH, Heilbronn.[Voyer, 1996] Voyer, R. and Breton, B. (1996) Coverage Prediction for Distributed
Emission of DAB. 3rd Intern. Symposium on Digital Audio Broadcasting,
Montreux[Voyer, 2000] Voyer, R., Camire, D. and Rime, A. (2000) Relevance of empirical
propagation models for interference coordination in mountainous
areas. Proc. International Broadcast Convention, Amsterdam[Waal, 1991] van der Waal, R. G. and Veldhuis, R. N. J. (1991) Sub-band Coding of
Stereophonic Digital Audio Signals, Proc. ICASSP[Watkinson, 2000] Watkinson (2000) The Art of Digital Audio, 3rd edition, Butterworth-
Heinemann, Oxford[Weck, 1995] Weck, Ch. (1995) The Error Protection of DAB. Records of AES UK
Conference ‘DAB, The Future of Radio’, London, 23�32[Whitteker, 1994] Whitteker, J. H. (1994) The CRC VHF/UHF Propagation Prediction
Program. Beyond Line-of-Sight Conference (BLOS), Session 9, Paper 6,Austin, Texas.
[Wiese, 1992] Wiese, D. (1992) Optimisation of Error Detection and Concealment forStrategies for Digital Audio Broadcasting (DAB). 92nd Convention AES,Vienna, Preprint 3264
Bibliography 409
![Page 432: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/432.jpg)
[Wolters, 2003] Wolters, M., Kjorling, K., Homm, D. and Purnhagen, H. (2003) A closer
look into MPEG-4 High Efficiency AAC. 115th AES Convention, NewYork.
[Worz, 1993] Worz, Th. and Hagenauer, J. (1993) Decoding of M-PSK-multilevel-Codes. ETT Vol. 4, 299�308
[Wustenhagen, 1998] Wustenhagen, U., Feiten, B. and Hoeg, W. (1998) Subjective ListeningTest of Multichannel Audio Codecs. 105th Convention AES, SanFrancisco, Preprint 4813
[Zieglmeier, 2000] Zieglmeier, W. and Stoll, G. (2000) DAB with MPEG Layer II �Still the Right Choice? Convention Report, 18th Tonmeistertagung,Hanover
[Zumkeller, 1994] Zumkeller, M. and Saalfranck, W. (1994) FADICS Fading ChannelSimulator. Grundig Electronics publication
[Zwicker, 1967] Zwicker, E. and Feldtkeller, R. (1967) Das Ohr als Nachrichtenempfan-ger. 2nd edition, Hirzel-Verlag, Stuttgart
Further Reading
AES Special publication (1996) Gilchrist, N. H. G. and Grewin, C. (eds)Collected papers on digitalaudio bit-rate reduction, AES, New York.
Collins, G. W. (2000) Fundamentals of Digital Television Transmission. John Wiley & Sons Ltd,Chichester.
De Gaudenzi, R. and Luise, M. (eds) (1994) Audio and Video Digital Broadcasting Systems and
Techniques. Elsevier, Amsterdam.Dickreiter, M., Dittel, V., Hoeg, W. andWohr, M. (eds.) (2008)Handbuch der Tonstudiotechnik, 7.Aufl., K G Saur, Munchen.
Eureka 147 Project (1997)Digital Audio Broadcasting. Brochure prepared for WorldDAB, Geneva
ITU-R Special Publication (1995) Terrestrial and satellite digital sound broadcasting to vehicular,portable and fixed receivers in the VHF/UHF bands. Radiocommunication Bureau, Geneva.
Kuhn, M. (ed.) (2008) Der digitale terrestrische Rundfunk. Huthig, Heidelberg.
Lauterbach, T. (ed.) (1996)Digital Audio Broadcasting: Grundlagen, Anwendungen und Einfuh-rungvon DAB, Franzis-Verlag, Munchen.
Lauterbach, T. (2002) Das Digitale Radio DAB. In: Medienwissenschaft, 3. Teilband. Ein
Handbuch zur Entwicklung der Medien und Kommunikationsformen. Edited by J.-F. Leon-hard,H.-W. Ludwig, D. Schwarze, E. Straßner. Verlag Walter de Gruyter, Berlin/New York.
Menneer, P. (1996) The Market for DAB – Sources and Findings of Existing Market Research
Studies, Prepared for EuroDAB Forum, Geneva.Muller, A., Schenk, M. and Fugmann, J. (1998) Datendienste im Digital Audio Broadcasting DAB,Schriftenreihe der LFK – Band 2, Neckar-Verlag, Ulm.
Muller-Romer, F. (1998) Drahtlose terrestrische Ubertragung an mobile Empfanger.
Schriften-reihe der SLM, Band 4, Sachsische Landesanstalt fur privaten Rundfunk undneue Medien (SLM), VISTAS-Verlag, Berlin.
Stojmenovic, I. (ed.) (2002)Handbook of Wireless Networks and Mobile Computing. John Wiley &
Sons, Ltd, New York.Tuttlebee, W. (ed.) (2002) Software Defined Radio – Enabling Technologies. John Wiley & SonsLtd., Chichester.
Tvede, L., Pircher, P. and Bodenkamp, J. (2001)Data Broadcasting –Merging Digital Broadcastingwith the Internet (Revised edition). John Wiley & Sons Ltd., Chichester.
410 Bibliography
![Page 433: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/433.jpg)
Internet Links
Note: The reader should be aware that any reference to an Internet web-page will be of informalcharacter only. The content of the cited web-page and/or the URL itself may be subject to
change.
[www.ASTRA] Web-site of SES-ASTRA Digital Satellite Radio.URL:http://www.ses-astra.com
[www.atdi] Web-site of ATDI � Software solutions in radiocommunications.URL:http://www.atdi.com
[www.dibeg] Web-site of DiBEG, the Japanese Digital Broadcast Experts Group
URL:http://www.dibeg.org[www.DRM] Web-site of Digital Radio Mondiale. URL:http://www.drm.org[www.DVB] Web-site of the Digital Video Broadcasting (DVB) Project
URL:http://www.dvb.org
[www.ETSI] Web-site of ETSI (European Telecommunications Standards Institute)URL:http://www.etsi.org
[www.HECA] Web-Site of Fraunhofer Institut fur Integrierte Schaltungen IIS, with
details of the conditional access system HECA.URL:http://www.iis.fraunhofer.de/bf/db/proj/heca.jsp
[www.iBiquity] Web-site of iBiquity Digital Corporation URL:http://www.iBiquity.org
[www.irt] Web-site of IRT (Institut fur Rundfunktechnik) GmbH, who offer thenetwork planning tool FRANSY. URL:http://www.irt.de
[www.lstelcom] Web-site of LS telcom AG, who offer the broadcast planning tool
CHIR+. URL:http://www.lstelcom.de[www.Mobil-info] Web-site of Mobil-Info service. URL:http://www.mobil-info.org[www.NIST] Web-site of the National Institute of Standards and Technology,
Computer Security Resource Center. URL:http://csrc.nist.gov
[www.Siriusradio] Web-site of Sirius Satellite Radio, Inc.URL:http://www.siriusradio.com
[www.Wiley] Web-site of the Wiley InterScience Home Page � the gateway to the
online edition of the book ‘Digital Audio Broadcasting: Principles andApplications. URL:http://www3.interscience.wiley.com
[www.WorldDAB] Web-site of the WorldDAB Organisation, London, U.K.
URL:http://www.worlddab.org[www.WorldDMB] Web-site of WorldDMB Forum, URL:http://www.WorldDAB.org[www.WorldSpace] Web-site of the digital broadcast service WorldSpace.
URL:http://www.WorldSpace.com
[www.XMRadio] Web-site of XM Satellite Radio. URL:http://www.XMradio.com
Bibliography 411
![Page 434: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/434.jpg)
Index
Access control, see Conditional Access, CA
unit 370, 373Adjacent channel protection ratio 295Advanced Audio Coding, AAC 24, 45, 51,
101, 117, 123, 145–6, 342core decoder 112core encoder 102, 109
Encryption Standard, AES 62Alert C protocol 187Alignment signal level 162Allotment 311
Amplifier 276–8, 327Amplitude Modulation, AM 83signalling system, AMSS 66, 83
Ancillary data 202field 100manager 203, 4
Announcement 77–82, 211, 359channel 78, 79cluster 78, 79–80
FM 81–82other ensemble 80support flag, Asu 78switching flag, Asw 78
types 78Antenna gain 290Application software 167
Artefacts 141
Assignment 311, 316
Astra Digital Radio, ADR 2, 16, 115Audiobit rates 115–16
conformance testing 343decoder 322, 339, 342–3, 353–4decoding 112
frame 100modes 114quality 140service 93
signal level 160–5super frame 50
Automatic Frequency Control, AFC 336
gain control, AGC 326Auxiliary Information Channel, AIC 55,
70, 73
Band III 157–8, 300, 308, 313, 330
Band Segmented Transmission, BST 22Baseband processing 334–9Bilateral coordination 316
Bit allocation 99error ratio, BER 154, 305–7
Body (MOT) 170Broadcasting operation system 200
BT Movio 364Building penetration loss 291
Digital Audio Broadcasting: Principles and Applications of DAB, DAB+ and DMB, Third Edition Edited by W. Hoeg and T. Lauterbach© 2009 John Wiley & Sons, Ltd. ISBN: 978-0-470-51037-7
![Page 435: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/435.jpg)
Calculation test point 316
Capacity unit, CU 35, 197Car radio 355Carrier-to-noise ratio, C/N 154, 285, 290CEPT (Conference Europeenne des
Administrations des Postes et desTelecommunications) 309, 310, 315
Change Event (CEI) 86
Channel 29–32, 278–88coding 36–41impulse response 304
level difference, CLD 132model 284–8prediction coefficients, CPC 132
Character set 66–67
Cluster, see Announcement, clusterCoded Orthogonal Frequency Division
Multiplex, COFDM 7, 267, 324
encoding 272modulator 273–4
Collection network 233, 237–51
Comb (TII) 271Common Interleaved Frame, CIF 36,
47, 252
phase error 276, 326–7Compact disk, CD 115Compression 162Concatenated coding 40–2, 50
performance of 45Concealment 152–3Conditional Access, CA 58–66
Confidence indicator 68Conformity check 316–7Content key 60
Contents indicator (PAD) 52Continuation flag 74Continuity flag 84, 85
Control character 178, 213–16word 60
Convolutional code 19encoding 252
interleaver 42–3, 50Co-ordinated Universal Time, UTC 68Country Id 70
Coverageextender 269, 303planning 288–303
Crest factor 278Critical band 98Cross-referencing 216Cryptographic algorithm 62
Cyclic prefix, see Guard interval
redundancy check, CRC 37–38, 52, 150,241, 305
DAB+ 1, 49, 101, 123, 134, 146,339, 367
audio bit rates 118, 119
coding 116–20benefits 5features 118
performance 45, 120sampling rate options 114
DAB (Digital Audio Broadcasting)
audio coding 113–16frame 51, 115
bandwidth 8
benefits 2–5block 8chip-set 345–54command set for receivers, DCSR 345
data interface 200ensemble, see Ensemblefeatures 3
front end 351–2history 5–13In-phase and Quadrature (DIQ) baseband
signal 273multiplex 3, 47–58, 167, 196network 232, 236platform 11
protocol stack 371, 394standard, standardisation 10, 13–15studio infrastructure 203
system family 1transmission 4, 14user application 72
Data carousel 176, 185content provider 194group 52, 171
inserter 194, 207Service Component Type, DSCTy 72
Date and time 68resolution 69
Decoding delay 42Deep indoor 291Deinterleaving 337–8, 353
Delay compensation 273planning 295
Device key 60
D-Fire chip set 348–54Differential GPS, DGPS 188–9
414 Index
![Page 436: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/436.jpg)
Digital
to analogue conversion, D/A 274–6Audio Broadcasting, see DABMultimedia Broadcasting, DMB 49, 364,
369–74
implementation 374performance of 45protocol stack 371, 394
-radio 372RadioMondiale,DRM 23–5, 62, 83, 117, 180Rights Management, DRM 58–9
Satellite Radio, DSR 16Video Broadcasting, DVB 19–20, 364service information 369
Direct conversion 275
Directory mode 171, 175Distribution network 251–6Dolby
ProLogic I 130Surround 129
Doppler frequency
shift 29, 279spectrum 280see also Jakes spectrum
Downstream entity, DE 238, 242DynamicLabel 72, 167, 177–9, 198, 211Plus 178
range 121, 164, 328control, DRC 120–4, 137, 165, 194
Editorial systems 200, 201Electronic programme guide, EPG 69, 74,
220–8, 360compression 224data management 227–8
structure 222transportation 224
Energy dispersal 273, 338
Enhanced packet mode 53, 174Ensemble 56, 83, 196, 366–7Extended Country Code, ECC 69geographically adjacent 84
label 68local time offset, LTO 69multiplexer 194, 231, 233–5, 259, 272
provider 194, 195, 229table 217Transport Interface, ETI 233, 251–3, 272,
273, 295Entitlement control message, ECM 60
Entitlementmanagementmessage, EMM 60
Envelope concept 314–15Equal error protection, EEP 38, 50, 154Erasure 47Error protection 150
Eureka 6, 147consortium 10goals 6
EuroDAB 11Expiration 174Extensible Markup Language, XML 221
Advanced Profile 225Basic Profile 225
Extension Part 125
Fade margin 287–8
Fast Fourier Transform, FFT 336InformationBlock, FIB 47, 55Channel, FIC, 35, 42, 47, 55–6, 73, 234, 252
Data Channel, FIDC 55, 187Group, FIG 55, 234
FEC packets 54
Flat fading 2865.1 format 127Forney interleaver, see Convolutional code,
interleaverFourier series 33FrameCRC 151
synchronisation 339Frequencyblock 308
information, FI 80, 83–5management 307–17modulation, FM 83
announcement 81network 263–4
plan modification 315
planning conference 309–10, 315synchronisation 339
Front end 324–34Funkhaustelegramm 204
Gap filler 269–71, 303
G/E flag 92Globalmasked threshold 98
Positioning System, GPS 188–9, 233, 252,267, 273
System for Mobile, GSM 31
Index 415
![Page 437: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/437.jpg)
Granule 100
Group information 222Guard interval 33, 264, 284
H.264 364, 378Half sampling rate 135Header information 170
mode 171parameters 174
Headroom 162
Hearing impaired 136–9threshold 94
Height loss 290
Hidden reference test 144HighEfficiency Advanced Audio Coding, HE
AAC 101, 378Efficient Conditional Access System,
HECA 61, 63IF tuner 331–2
Home receiver 355Huffman coding 107
In-band-adjacent-channel, IBAC 21In-band-on-channel, IBOC 9, 21–2
In-house Protocol 204Impairment scale 143Indoor reception 291
Information page 182Integratedcircuit 345–54
Services Digital Broadcasting, ISDB 22–3,364
Intellitext 179Intensity stereo coding 104, 110
Inter-carrier interference 326–7Inter-channel intensity difference, IID 110,
132
coherence, ICC 132cross correlation, ICC 111, 132phase difference, IPD 111
Interface 344–5Interference 293–5Interleaving 42Intermediate frequency, IF 334
interface 334Intermodulation 277, 350International Linkage Set Indicator, ILS 86
Telecommunications Union, ITU 309–10,315
Internet
protocol, IP 14datacasting, IPDC 190, 369, 374–80protocol stack 375
tunnelling 190, 364
radio 25Intersymbol interference 31–3, 283–4Intra-service protection ratio 294–5
Jakes spectrum 29
JESSI 8, 330, 346–8Joint Stereo 97, 197Journaline 179–86
decoder 186Markup Language 181object format 184
transmission 185
Label 66–8, 169Latitute 88Layer concept 314L-band 8, 157–8, 301–3, 308, 314, 330
Leap second indicator, LSI 68Level 160profile 162
Limiter 164Linkage Actuator (LA) 86information 219
set number 86List/Table 183Listening test 141–9
Local oscillator (LO) pulling 275Local window 264Location correction factor 292probability 292
Logical control interface 240data interface 238–40frame 38, 50
number, LFN 73interface 252
Log-normal distribution 283, 284
Longitude 88Loudness 164Low frequency effect, LFE 126, 127
Main identifier 88, 271
Main Service Channel, MSC 35, 42, 48, 252,273
data group 52, 185, 191Man-made noise 292–3
416 Index
![Page 438: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/438.jpg)
Masked threshold 97
Masking 94Matrix 129Surround 129–30
Maximum input power 322
MediaFLO 364Medium wave, MW 84Mid/side stereo 104
Minimum field strength 293receiver requirements 320–3
Mobile
Platform for Efficient Traffic InformationServices, mobile.Info 360–1
radio channel 29, 264reception 29
television, TV 363–4, 378–80Modified Discrete Cosine Transform,
MDCT 102
Julian Date, MJD 68Modulationcoherent 19
differential 19, 44multicarrier 31
Monitoring 307
Mono commentary channel 134downmix 133
Mother code 36Moving Pictures Expert Group, MPEG 7, 94
Layer II 16, 37, 96–101, 146–7, 339, 340Layer III 17MPEG-1 128, 364
MPEG-2 19, 23, 124, 134, 364Transport Stream, TS 50, 367–9, 374
MPEG-2/4 HE AAC 101–7, 134, 146–9,
339MPEG-4 5, 135, 137, 364, 370Surround 130–3, 343
3/2-Multichannel 126Multichannel audio 93, 123–33frame 125sound systems 127
Multi frequency network, MFN 84, 263stimulus test with hidden reference and
anchor, MUSHRA 144
Multilevel key hierarchy 60Multilingual channel 137service 134
Multimedia 363database 206Object Transfer, MOT 14, 170–5, 199, 227
basic transport parameters 174
Broadcast Web Site, BWS 176, 199caching support parameters 174encryption 65interface 205
mode 171object 170parameters 170, 174
slideshow, SLS 69, 175–6, 199, 206Multipathchannel 278–9
fading 284propagation 29, 264–5
Multiplexconfiguration 48, 169, 234, 322
NetworkSignallingChannel,MNSC 252, 273reconfiguration 57, 83, 245–6, 255, 322
Multi-protocol encapsulation, MPE 379
MUSICAM 96Music/Speech Control, M/S 122flag 136, 194
Muting 152
Network-adapted interface 252adapter 254
compensation delay 295gain 267–8-independent interface 252padding delay 297
New flag 79NICAM 2Noise figure 290, 325
-to-mask-ratio 99Non-STI service providers 250Null symbol 35, 69, 271
Objective difference grade, ODG 158
One-To-Two, OTT 131Onset of impairment, OoI 154Open Data Application, ODA 217
Orthogonal Frequency Division Multiplex,OFDM 32–3
demodulation 335–6, 352–3performance of 44
Other ensemble, OE, flag 83–4, 87services 82
Outer code 45
interleaver 45Overhead 372–4, 375
Index 417
![Page 439: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/439.jpg)
Packet mode 49, 52–5, 172, 198
inserter 209Parametric stereo 101, 109–11, 117, 130, 342Parity check bytes 41Pattern (TII) 271
Pause/Rewind function 359Peak programme meter, PPM 161Perceptual
coding 94evaluation of audio quality, PEAQ 158–60
Permitted maximum signal level, PML 162
Phase noise 275–6, 326Physical STI interface 241–2, 248Pitch control 139Plain Text Message 183
Podcast 26, 171Point of failure, PoF 154Polyphase filterbank 96, 98–9
Portable receiver 355Post-echo 98Pre-echo 98, 104, 133
ProgrammeItem Number, PIN 74, 213Number, PNum 74
provider 194service information, PSI 369, 371, 377–8signal level 121, 163Type, PTy 76–7, 211, 358–9
dynamic 76International Table 70International code 76
language 74–5, 77Search mode 76, 358static 76
Watch mode 74, 84, 358–9Programme-associated data, PAD 3, 37,
50–1, 115, 120–4, 168, 194, 197
extended, X-PAD 51, 115, 177fixed, F-PAD 51, 115inserter 208multiplex 52
packet structure 52Propagation model 282–4prediction 283
Protection 294level 38profile 38
Psycho-acoustic model 96–8, 106Pulse coded modulation, PCM 93Puncturing 36
Quadrature Phase-Shift Keying, QPSK 16,
31, 44mirror filter, QMF 109, 131modulator 33
Quality of service, QoS 139
Quantisation 106
Radio data system, RDS 14, 17, 66, 210–20Radiotext 177
Rate compatible punctured convolutional
(RCPC) code 36, 338Rayleigh channel 322distribution 279, 284
fading 155Receiverarchitecture 323
block schematic 323characteristics 290Data Interface, RDI 344, 345features 357–61
front end 324–34market 356–7overview 354–7
requirements 320–3Reception classes 289modes 288
Reed-Solomon code, RS 19, 40–1, 49, 53–4, 252decoding 340–1shortened 41
Reference identifier 87
Reference network 311, 312–14Region 83, 90–2definition 90
description 91identifier 78, 84, 91label 90
Repeater, see Gap fillerResidual coding 133Rice distribution 279, 284
Rivest-Shamir-Adleman algorithm, RSA 62
Sampling rate 114, 135S-band 18Scale factor 99, 105–6, 150CRC 151
Scattering diagram 280Schedule information 222Security module 62
Segment (MOT) 171, 177size 172
418 Index
![Page 440: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/440.jpg)
Selectivity 322
Self-interference 268Sensitivity 322Service 56component 56, 168
label 71language 74–5Pty code 77
trigger 73identifier, Sid 70, 74, 210information 66, 194, 207, 222
key 60label 70linking 86–7multiplexer 194, 260–62
other ensemble 82provider 194, 195, 231profile, SPP 257–8
table 218–19Transport Interface, STI 187, 233, 237–42level 248–50
Shoulder height 277Signal-to-mask ratio, SMR 97Signal-to-noise ratio, SNR 136, 325
Signal-to-quantisation-noise ratio 94Simulcast 26, 193Single frequency network, SFN 31, 34, 84,
88, 251, 264–72
stream characterisation, SSTC 252Sirius Satellite Radio 18Spatial
audio coding, SAC, see Moving PicturesExpert Group, MPEG, Surround
audio object coding, SAOC 135
decoding 131encoding 131
Spectral Band Replication, SBR 24, 101,
107–9, 117, 342envelope 107
Speech/music indication 120Speed control 138
Spherical rectangle 91Statistical multiplexing 375Stereo 93, 104–5
downmix 133Stream 237identifier 239
mode 48, 50Streaming 190Sub-band 95
Sub-channel 48
Assignment Table, SAT 378, 379–80code rate 48
Sub-identifier 88, 271Subjective difference grade, SDG 143
test, see Listening testSurroundchannel 126
sound 119Synchronisation 338–9Channel, SC 35, 87
Tag-length-value scheme 225
Teletext 201Temporal masking 98noise shaping 104
Ticker message 183Timedelay 88spread 279
interleaving 42, 273, 285stamp 252, 273, 298synchronisation 295, 307, 339
variance 29, 279Time-frequency-phase-reference, TFPR 35,
337, 339
TOPNews 359–60Traffic message channel, TMC 187, 206Transmissionframe 35, 47, 273
mode 33–4, 280, 322, 336Transmitter 272compensation delay 295–6
Identification Information, TII 83, 271–2,303, 307
comb 87
database 87–90pattern 87signal 87
offset delay 273, 296spacing 268timing 269
Transparent Data Channel, TDC 188,
189Transport-channel-protection 64
overhead 172–3Protocol Experts Group, TPEG 62, 188,
206, 360–1
Transport-adapted Control Interface 240
Index 419
![Page 441: Digital Audio Broadcasting - Digital audio broadcasting 3rd.pdf7.2.1 Difference between FM and DAB Networks 263 7.2.2 Single Frequency Networks 264 7.3 Particularities of Single Frequency](https://reader033.vdocuments.us/reader033/viewer/2022042710/5f57b772abc01218e751abca/html5/thumbnails/441.jpg)
Traveller Information Services Association,
TISA 188, 361TV tuner 330Two-to-Three, TTT 131
Unequal error protection, UEP 37, 50, 150Update flag 74
Upstream entity, UE 238, 242User application 167–70
Virtually error-free channel 45Viterbi decoder 19, 338, 353
Volume Unit (VU) meter 161
Web-casting, see Internet, radio
Windowing 103–4World Administrative Radio Conference,
WARC 8WorldDAB 12, 364
WorldDMB 12, 221WorldSpace 17
XM Satellite Radio 18X-PAD data group 52
user application label 72
Zero-IF 329–30
420 Index