dicolor i series led display panels

I-SERIESPro Touring LED Displays

www.MegaSySteMSInc.coM I [email protected] I 866-460-Mega (6342)

The exclusive distributor of Dicolor in the USA

KEY BENEFITS

High contrast, high grayscale, vivid image quality display

Bright

Lightweight and slim design

Quiet operation

Low power consumption

Tool-less assembly. Installation is fast and easy taking less than 10 seconds per panel

Thermally efficient module design helps reduce heat within the display

Die-cast aluminum cabinet greatly improved flatness of the display surface and gaps between panels.

Professional rated Nuetrik connections

Fly or ground-stack installation options

ETL listed

1 year limited warranty and support on manufactures defects

Feature full Dicolor sending and receiving cards with display calibration

Lowered transportation costs with lighter and slimmer cabinets

I-501 LED Display

Broad viewing angle

RUGGED, CURVABLE, VIVID CLARITYDICOLOR I-SERIES LED DISPLAYS

U-501 LED Display

Outdoor IP rated models available

Blow through transparent models available

Curve panels -/+6° with side latch hardware

THIN & LIGHTWEIGHT

4.2”/106mm

25.2”/640mm

33 lbs /15 kgs

I-16 LED DisplayUkraine

I-120D shown.

Weights, dimensions, transparency, LED configuration and connections vary from model to model.

25.2

”/64

0mm

Handle

Power and Signal Indicator Light

Signal Connection

Fine Adjustment Screw

Locking Latch

PowerCon Power Output

Spring Bolt

PowerCon Power Input

PARTS DIAGRAM

Signal Connection

HandleSide Latch

I-501 shown.

Weights, dimensions, transparency, LED configuration and connections vary from

model to model.

I-501 LED DisplayUSA

110-240 VAC

POWER, SIGNAL & CONNECTIONS

Auto Switching

Dicore drive system with DVI signal input

Signal input

Panel in power cable: Neutrik PowerConPanel out power cable: Neutrik PowerConSignal input and output: Neutrik EtherCon

PC

I-120D LED DisplayLamb of God

TOOL-LESS ASSEMBLY

The I-Series is easy assembly. No tools are required to put these panels together. Attach the side latch hardware, then lock the top latch and secure the spring bolts. Each panel takes less than 10 seconds to install.

Side Latch Top Latch Spring Bolt

I-501 LED DisplayTurkey

Argentina

CURVE INSTALLATION

The side latches on the I-series allow the panels to be installed with a -/+ 6° curve without loss of pitch.


Specifications are subject to change without notice. Custom configurations available upon request.

MODEL PIXEL PITCH

PANEL RESOLUTION

PIXELS PER DISPLAY

LED CONFIGURATION VIEWABLE ANGLE

MAX POWER CONSUMPTION (PER PANEL)

IP RATING

WEIGHT CABINET SIZE BRIGHTNESS REFRESH RATE

CONTRAST VIEWING DISTANCE (FT)

DRIVE METHOD

I-501 5MM 128 X 128 16,384 SMD3528 140°/120° ≤ 200W AVERAGE 56W

IP30 30.5 LBS 13.875 KGS

25.2” X 25.2” X 3.7” 640 X 640 X 94 MM

≥1800 CD/M² 600HZ 450 33 FT 1/16

I-501-H 5MM 128 X 128 16,384 SMD3528+HIGH REFRESH RATE 140°/120° ≤ 200W AVERAGE 56W

IP30 30.5 LBS 13.875 KGS

25.2” X 25.2” X 3.7” 640 X 640 X 94 MM

≥1800 CD/M² 2000HZ 1050 33 FT 1/16


IP30 30.5 LBS 13.875 KGS

25.2” X 25.2” X 3.7” 640 X 640 X 94 MM

≥1600 CD/M² 600HZ 500 53 FT 1/4


IP30 30.5 LBS 13.875 KGS

25.2” X 25.2” X 3.7” 640 X 640 X 94 MM

≥1600 CD/M² 800HZ 800 83 FT 1/4


IP30 30.5 LBS 13.875 KGS

25.2” X 25.2” X 3.7” 640 X 640 X 94 MM

≥1200 CD/M² 600HZ 500 66 FT 1/8


IP30 30.5 LBS 13.875 KGS

25.2” X 25.2” X 3.7” 640 X 640 X 94 MM

≥1200 CD/M² 1500HZ 800 66 FT 1/8


IP65 31.3 LBS 14.208 KGS

25.2” X 25.2” X 3.9” 640 X 640 X 98 MM

≥4000 CD/M² 600HZ 1100 53 FT 1/4


IP65 31.3 LBS 14.208 KGS

25.2” X 25.2” X 3.9” 640 X 640 X 98 MM

≥4000 CD/M² 800HZ 1700 53 FT 1/4

I-100 10MM 64 X 64 4,096 SMD3535 140°/140° ≤260W IP65 31.3 LBS 14.208 KGS

25.2” X 25.2” X 3.9” 640 X 640 X 98 MM

≥4000 CD/M² 600HZ 1100 66 FT 1/4

I-100-H 10MM 64 X 64 4,096 SMD3535+HIGH REFRESH RATE 140°/140° ≤260W IP65 31.3 LBS 14.208 KGS

25.2” X 25.2” X 3.9” 640 X 640 X 98 MM

≥4000 CD/M² 800HZ 1700 66 FT 1/4

I-100D 10MM 64 X 64 4,096 DIP3146 140°/140° ≤ 200W AVERAGE 56W

IP65 33 LBS 15 KGS

25.2” X 25.2” X 4.2” 640 X 640 X 106 MM

≥ 6500 CD/M² 600HZ 1500 66 FT 1/4

I-100D-H 10MM 64 X 64 4,096 DIP 3146+HIGH REFRESH RATE 140°/140° ≤ 200W AVERAGE 56W

IP65 33 LBS 15 KGS

25.2” X 25.2” X 4.2” 640 X 640 X 106 MM

≥ 6500 CD/M² 800HZ 2100 66 FT 1/4

I-120D 12.8MM 50 X 50 2,500 DIP3146 140°/120° ≤ 170W AVERAGE 48W

IP65 33 LBS 15 KGS

25.2” X 25.2” X 4.2” 640 X 640 X 106 MM

≥5500 CD/M² 600HZ 1500 79 FT 1/5

I-120D-H 12.8MM 50 X 50 2,500 DIP 3146+HIGH REFRESH RATE 140°/120° ≤ 170W AVERAGE 48W

IP65 33 LBS 15 KGS

25.2” X 25.2” X 4.2” 640 X 640 X 106 MM

≥5500 CD/M² 2000HZ 2100 79 FT 1/5

I-160D 16MM 40 X 40 1,600 DIP 3146 120°/50° ≤ 200W AVERAGE 56W

IP65 33 LBS 15 KGS

25.2” X 25.2” X 4.2” 640 X 640 X 106 MM

≥7000 CD/M² 600HZ 1500 105 FT STATIC


IP65 33 LBS 15 KGS

25.2” X 25.2” X 4.2” 640 X 640 X 106 MM

≥7000 CD/M² 1000HZ 2100 105 FT STATIC

I-200D 20MM 32 X 32 1,024 DIP3146 140°/120° ≤ 220W AVERAGE 59W

IP65 33 LBS 15 KGS

25.2” X 25.2” X 4.2” 640 X 640 X 106 MM

≥6000 CD/M² 600HZ 1500 131 FT STATIC


IP65 33 LBS 15 KGS

25.2” X 25.2” X 4.2” 640 X 640 X 106 MM

≥6000 CD/M² 1000HZ 2100 131 FT STATIC

SPECIFICATIONS

TOLERANCE

The tolerance is 0.1mm for the enclosure and 0.5mm of the screen flatness and gap between screens

Fine adjustment screw

FINE ADJUSTMENT

The panel can be adjusted to align during installation on all four sides by using the inner hexagon spanner to adjust the screw

MOUNTING HARDWARE

Hanging Beam 3 [6.30’/1.92m] (Model DI-FB-I10)Hanging Beam 2 [4.20’/1.28m] (Model DI-FB-I2C)Hanging Beam 1 [2.10’/0.64m] (Model DI-FB-I3C)

Ground Support Base (Model DI-IBASE)

Dicolor offers both hanging beam and ground support hardware. The hanging beams come in three sizes and can be joined to create custom configurations.

ROAD CASE

6 Panel Mid Duty Case[3.22’ x 3.15’ x 2.33’/0.98 x 0.96 x 0.71m] (DI-IC6)

OUTDOOR IP RATED OPTIONS

SENDING & RECEIVING CARD

The Dicore sending and receiving card pixel maps each display and has several other useful benefits that will make installing and running your wall simple and easy.

Signal redundancy - If a cable fails, Dicore sends the signal from another panel to the failed one. This protects output of your display.

Data saved to Dicore sending card - If a panel goes bad, simply replace it and it will work the same (unlike other panels which save the data directly to the panel).

Calibration - The hue, saturation and brightness can be adjusted between panels.

Most of the panels in the I-Series are outdoor rated. Reference the specifications for the list of panels that are rated IP 65.

ETL LISTED

www.MegaSySteMSInc.coM I [email protected] I 866-460-Mega (6342)

The exclusive distributor of Dicolor in the USA

Dicolor is a leading manufacturers of professional LED Displays worldwide. They have sales and distributions in Germany, Latin America and North America. Since being established in 2006, their products have been used world wide in headlining tours and international events. Their manufacturing facility utilizes state-of-the-art automated machinery to produce up to 8000 sqm of LED Displays monthly. Innovation is their top priority, with 14% of their employees working in research and development. Mega Systems, Inc. is proud to be the exclusive Distributor in the USA for Dicolor. We offer the best sales and service support which can only be seen by a family-owned and operated business.

ABOUT DICOLOR


dicolor i series led display panels

Documents

led displaybroad

led displayusa110

led displayukrainei

led displayusaspecifications

series led displaysu

power cable

d led displaylamb of

w average 56wip30