dicebot is a robot that throws a dice instead of human when detecting sound of clap. dice
TRANSCRIPT
DiceBot is a robot that throws a dice instead of human
when detecting sound of clap.
DiceDice
1. Put Battery Case on Main Frame and fix with bolts and nuts.
AssemblingAssembling
2. Fix L-type 2x2 Frames to CPU Board with bolts and nuts then put L-type 2x2 Frame on Main Frame and assemble with bolts and nuts.
AssemblingAssembling
3. Fix L-type 2x6 Frame to left of Servo Motor then put L-type 2x6 Frame and DC Motor Drive Board on the other side and fix with bolts and nuts.
AssemblingAssembling
4. Put L-type Frame that is fixed to Servo Motor on Main Frame and fix with bolts and nuts.
AssemblingAssembling
5. Put Wheel Guides on Caterpillar Wheels and fix with bolts and nuts.
AssemblingAssembling
6. Make 2 lanes as connecting 19 Caterpillars and fix them to Caterpillar Wheels.
AssemblingAssembling
7. Connect Wheel Guides to Main Frame using 40mm Supports.
AssemblingAssembling
8. Insert 20mm Support to Wheel Guides then fix with bolt.
AssemblingAssembling
9. Fix High-speed DC Motor and Motor Frames with bolts.
AssemblingAssembling
10. Fix Wheel Guide to Motor Frame that is fixed to High-speed DC Motor with bolts.
AssemblingAssembling
11. Insert Wheel Guide that is connected to High-speed DC Motor to Servo Motor axle. And insert Support that is connected to opposite side of Wheel Guide to CPU Board and fix with Nylon nut.
AssemblingAssembling
12. Put Caterpillar Wheel and L-type 2x6 Frames on Wheel Guide and fix with 3x10 Bolts and nuts to make Dice Bucket.
AssemblingAssembling
13. Fix Sound Sensor Board and Motor Frames with bolts.
AssemblingAssembling
14. Fix Motor Frame that is connected to Sound Sensor Board to CPU Board with bolts.
AssemblingAssembling
15. Fix Dice Bucket to High-speed DC Motor using 2.6x10 Bolts.
AssemblingAssembling
16. Connect Power Cable of Battery Case to Power Connector of CPU Board. Connect High-speed DC Motor cable to DC Motor Drive Board A.
AssemblingAssembling
17. Connect 3Pin Cable to OUT Port 1, 2 of CPU Board and 1, 2 of DC Motor Drive Board. Connect Servo Motor cable to OUT Port 3 of CPU Board.
AssemblingAssembling
18. Connect 3Pin Cable to IN Port 1 of CPU Board and Sound Sensor Board. Completed DiceBot.
AssemblingAssembling
Setting Position of Starting Point Radius of Rotation
Set starting point of servo Set starting point of servo motormotor