diamond drilling - wolseley · part no 330.101.0005 combi core guide rod 16 x 350mm part no...
TRANSCRIPT
Diamond Drilling The Ultimate Collection
www.marcrist.comwww.marcrist.com
WITH
MARCRISTSERVICEVOUCHERS
WITH
MARCRISTSERVICEVOUCHERS
Marcrist International LimitedMarcrist House, Kirk Sandall Industrial EstateDoncaster DN3 1QR EnglandT: +44 (0)1302 890888F: +44 (0)1302 [email protected]
Marcrist DiamantwerkzeugeVertriebsgesellschaft mbHKarl-Benz-Str. 879761 Waldshut-TiengenDeutschlandT: +49 (0)7741 966 72 0F: +49 (0)7741 966 72 [email protected]
Marcrist Diamantwerkzeuge GmbHPostfach 37 5322 KoblenzSchweizT: +41 (0)41 630 25 43F: +41 (0)41 630 25 [email protected]
WITH
MARCRISTSERVICEVOUCHERS
WITH
MARCRISTSERVICEVOUCHERS
Testimonial image is for illustration purposes only.
955.1920.104 All prices exclude VAT
Scan Me!
MARCRIST, LEADERS INDIAMOND CUTTING &DRILLING TECHNOLOGYDesigned to save you money!For 30 years, Marcrist has been technology leader indiamond cutting, grinding and drilling.
It is the Marcrist philosophy, through continued researchand development to create the most efficient diamondtools, which save you money by giving you the lowestcosts per cut or hole!
We commissioned TÜV to witness the testing of Marcristblades and cores and to certify the results. The resultsshow that Marcrist are the quickest and most efficient ofall the blades and cores tested, with the lowest cost percut or hole. Compare our costs before you invest in anyother product.
WITH
MARCRISTSERVICEVOUCHERS
WITH
MARCRISTSERVICEVOUCHERS
“
“Marcrist do not onlypromise savings…we guarantee them!
British tradition, European design with Swiss precision.
DIAMOND DRILLINGA MUST FOR YOURHEALTHExposure to vibration can lead to Hand Arm VibrationSyndrome (HAVS). The most well-known form of HAVS isVibration White Finger (VWF). The HSE estimates thatthere are around 300,000 people in the UK withadvanced stage VWF. VWF has already led to morethan £100,000,000 in compensation claims!
Electro pneumatic hammerscause massive vibrations.
How do I reducerisk and liability?HSE Recommends“Consider job rotation or alternative working methodse.g., diamond drilling instead of hammer drilling!”
HILTI Recommends“Consider different working methods e.g. diamonddrilling instead of hammer drilling.”
BOSCH Recommends“Consider job rotation or alternative working methodse.g., rotary (diamond) drilling instead of hammer drilling.”
Using Marcrist Diamond Drillssaves time, money and effort.Holes can now be drilledquickly and easily througheven the hardest materials.
Jobs that had previouslytaken hours now onlytake minutes!
Diamond drilling is accepted as themost efficient method of formingprecision holes! Compared withconventional hammer and chisel,you save 46 minutes on every∅125 mm hole!
Working test: Hammer and chisel compared with diamond core, drilling a hole∅125 mm/200 mm depth,reinforced concrete(B45, reinforcing ∅12 mm).
Forming the hole
Making good
Cleaning and Plastering
TOTAL TIME
Hammering
27 min
15 min
10 min
52 min
Diamond Drilling
6 min
0 min
0 min
6 min
HOW MANY HOLES CAN IDRILL PER DAY BEFORE(EAV) IS REACHED?
∅82mm Limestone ConcreteB45/45 Newton 300mm depth
Electro Pneumatic HammerMakita type HR 4011- C AVTVibration Dampened ∅ 82mm TCT Core
Diamond DrillingMarcrist DDM3 with drill stand DS150∅ 82mm Diamond Core
Diamond DrillingMarcrist DDM3 Hand Held∅ 82mm Diamond Core
If a worker receives a hand armvibration dose above ELV(exposure limit value), thenimmediate steps must be takento reduce the exposure!
Working above this level will notbe permitted!
Health & Safety Executive
1.3Holes
104Holes
605Holes
Vibration assessment by Fivesquared Vibration Management
Solutions. Test February 2009
“ “
“ “DIAMOND DRILLINGA MUST FOR YOUR POCKET
MARCRIST GUARANTEES
UNRIVALLED WORLDWIDE
30 DAYS MONEYBACK GUARANTEETest a Marcrist machine fora month, if after that timeyou are not fully satisfied,we will give you yourmoney back, guaranteed.
5 YEARSNO COSTS*
No repair costs whatsoeverfor 5 years from date ofpurchase!
• Servicing• Safety check• Worn parts• Labour costs• Return of product to you
ARE ALL TOTALLY FREE
LIFETIMEMANUFACTURERSWARRANTY
* With Service Vouchers as opposite
** Subject to machine being serviced atappropiate intervals by Marcrist. If themachine has not been serviced, or hasno service tokens, charges will apply.
MARCRIST GUARANTEE
FREE SERVICE VOUCHERS
Any machine is only as good as the cores which you use.
We reward you for using quality diamond cores.
With every Marcrist 850X core, you get a FREE ServiceVoucher.
Diamond machines need maintenance, service and repairs.
With Marcrist Service Vouchers, all service and repairs ofMarcrist diamond drilling machines, including parts,labour and transport back to you are totally FREE.
DIAMOND DRILLINGWITH NO SERVICE OR
REPAIR COSTS
Number of vouchers needed for FREE repair, service,safety check, including all parts and labour:
DDM2 - 10 VouchersDDM3 - 15 VouchersDDM4 - 20 VouchersDS150 - 5 VouchersDS250 - 7 Vouchers Marcrist repairs or replaces
totally free of charge duringthe entire life of themachine, all machineswhich suffer defects as aresult of:
• Faulty materials• Faults in manufacture• Faulty workmanship**
If you have insufficient vouchers,the repair costs will be reducedas a % of your vouchers.
i.e. DDM2 & 5 vouchers wouldequal 50% off the cost of repairs.
WITH
MARCRISTSERVICEVOUCHERS
WITH
MARCRISTSERVICEVOUCHERS
DDM2
2 SPEED
GS CERTIFIED
Total FlexibilityAccepts all cores 1¼” and ½”
Flexibility Integralwater feed for dryand wet drilling
DDM2THE PROFESSIONAL
2 SPEED FOR HANDHELD DRILLING
Total PowerPowerful 1500watt performance
Sealed for Life2 speed oil bathgearbox
Ultimate SafetyIn line RCD protectionswitches off electricalcurrent within milli-seconds (230V only).
DurabilityBreak resistantmetal housingfor durability
Performance Data DDM2
Drilling capacity: 230V/110VMasonry: Ø 20 - Ø 200 mmConcrete: Ø 20 - Ø 152 mmPower: 1500 watt2 speeds: 950/2100 min-1
Gearbox: Oil bath Mechanical Protection: Safety friction clutchElectrical Protection: In line RCD (240V)
Housing: MetalWater Feed: IntegralWeight: 5.6 kg
Part No. 240V: 7700.001.001Part No. 110V: 7700.001.002
Total SafetyIntegral clutchprotectsmachine andoperator
WITH
MARCRISTSERVICEVOUCHERS
WITH
MARCRISTSERVICEVOUCHERS
Total FlexibilityAccepts all cores 1¼” and ½”
Total PowerPowerful 1500watt performance
Sealed for Life3 speed oil bathgearbox
Ultimate SafetyIn line RCD protectionswitches off electricalcurrent within milli-seconds (230V only).
DurabilityBreak resistantmetal housingfor durability
Total SafetyIntegral clutchprotectsmachine andoperator
DDM3THE SUPER PROFESSIONAL
3 SPEED FOR HANDHELD & RIG MOUNTED DRILLING
Performance Data: DDM3
Drilling capacity: 230V/110VMasonry: Ø 10 - Ø 200 mmConcrete: Ø 10 - Ø 152 mm
Power: 1500 watt3 speeds: 950/1800/3450 min-1
Gearbox: Oil bath Mechanical Protection: Safety friction clutchElectrical Protection: In line RCD (240V)Housing: MetalWater Feed: IntegralWeight: 5.8 kg
Part No. 240V: 7750.001.001Part No. 110V: 7750.001.002
DDM3
3 SPEED
GS CERTIFIED
Flexibility Integralwater feed for dryand wet drilling
WITH
MARCRISTSERVICEVOUCHERS
WITH
MARCRISTSERVICEVOUCHERS
Total SafetyMechanical safetyclutch protectsmachine andoperator
DDM4THE HEAVY WEIGHT
Extreme Heavy duty gearbox
Total FlexibilityAccepts all cores 1¼”and ½”
Ultimate SafetyIn line RCDprotection switchesoff electrical currentwithin milli-seconds(230V only).
Sealed for LifeSealed greasel bathgearbox for extreme life
Extreme Break resistanthousing
DDM4
HEAVY WEIGHT
NEW
Performance Data DDM4
Drilling capacity: 230V/110VConcrete: Ø 250 mmMasonry: Ø 350 mmPower: 2450 watt2 speeds: 460/900 min-1
Gearbox: Grease bath Mechanical Protection: Safety friction clutchElectrical Protection: In line RCD (230V)Housing: MetalWater Feed: IntegralWeight: 13 kg
Part No. 240V: 7760.001.001Part No. 110V: 7760.001.002
WITH
MARCRISTSERVICEVOUCHERS
WITH
MARCRISTSERVICEVOUCHERS
Total PowerPowerful 2450 Wattperformance
Torsion resistant alloycolumn
• Ultra light• Ultra compact
Feed handle for left orright handed use
Precision carriage
Bolt down alloy foot
Precision motor mountfor DDM2 and DDM3
DS150
LIGHTCOMPACT
NEW
Performance Data DS150
Height: 840mmWidth: 170mWeight: 9.6kgCapacity: 150mm
Part No: 7800.501.001
DS150COMPACT MINI DRILL STAND
FOR DDM2/DDM3
WITH
MARCRISTSERVICEVOUCHERS
WITH
MARCRISTSERVICEVOUCHERS
Stabiliser for ultimate stability
Carryinghandle
Precision carriage withmicro adjustments
Feed handle forleft or righthanded use
Transportwheels
Combination foot forvacuum and bolt down
Micro precisionadjustable feet
Torsion resistant column
DS250
TITAN ALLOYS
NEWDS250TITAN ALL AIRCRAFT ALLOYS
FOR DDM3/DDM4 • Alloy Construction
• 90o tiltable for angle drilling from 0 – 90oWITH
MARCRISTSERVICEVOUCHERS
WITH
MARCRISTSERVICEVOUCHERS
Photograph shows optionalQuick Release Precision MotorMount DS250. Sold separately.
Performance Data DS250
Height: 1000mmWidth: 270mmWeight: 17kgCapacity: 250mmIncludes: Transport wheels, Vacuum foot
Part No: 7800.501.002
MARCRISTCOMPACT KIT
DDM3 + DS150
DS150 – Ultra lightØ 150mm capacityc/w motor mounting collarDDM3 – 3 speed drilling motor 950/1800/3450 min-1
Capacity Ø 152 mm Concrete, Ø 200 Brick
Transport case for DDM3 & Spanners
MARCRISTMIDI KIT
WITH
MARCRISTSERVICEVOUCHERS
WITH
MARCRISTSERVICEVOUCHERS
DDM3 + DS250 Titan
DS250 – Ø 250mm capacityc/w precision motor mounting collar, transport wheels, vacuum and bolt down footDDM3 – 3 speed drilling motor 950/1800/3450 min-1
Capacity Ø 152 mm Concrete, Ø 200 Brick
Transport case for DDM3 & Spanners
WITH
MARCRISTSERVICEVOUCHERS
WITH
MARCRISTSERVICEVOUCHERS
WITH
MARCRISTSERVICEVOUCHERS
WITH
MARCRISTSERVICEVOUCHERS
DDM4 + DS250 Titan
DS250Ø 250mm capacityc/w transport wheels, vacuum and bolt down footDDM4 – 2 speed drilling motor 460/900 min-1
Capacity Ø 250mm Concrete Ø 350mm Brick
Spanners
WITH
MARCRISTSERVICEVOUCHERS
WITH
MARCRISTSERVICEVOUCHERS
DIAMOND DRILLING MACHINE COMPONENTS
Combination Anchor Set for Concrete & BrickC/W 3 re-usable anchorsPart No 7800.001.001
Replacement AnchorsConcrete & Brick (re-usable) 5pcsPart No 7800.001.003
Spanner Set (Wet Drilling)1 x 36mm (DDM4), 1 x 41mm (11/4”)Part No 7800.001.014
Water Collection System c/w seals
Ø 10 – 150 mm Part No 7800.001.004
Ø 10 – 250 mm Part No 7800.001.005
Replacement Top Seals
Ø 10 – 150 mm (set of 3)Part No 7800.001.006
Ø 10 – 250 mm (set of 3) Part No 7800.001.007
Replacement Bottom Seals
Ø 150 mm (set of 3) Part No 7800.001.012
Ø 250 mm (set of 3) Part No 7800.001.013
MARCRISTMAXI KIT• Alloy Construction
• 90o tiltable for angle drilling from 0 – 90o
Photograph shows optionalQuick Release Precision MotorMount DS250. Sold separately.
DIAMOND DRILLING MACHINE COMPONENTS
DIAMOND DRILLING ACCESSORIES FOR WETDRILLINGPrecision Motor Mount DS250
For DDM2 + 3 Part No 7800.200.003
Water Pressure Bottle 11LWith 2 metre hose and connect coupling
Safety pressure release valve
Part No 7800.001.011
Vacuum Pump110 Volt Part No 7800.100.002
230 Volt Part No 7800.100.001
Replacement vacuum seals forDS250 – 3 pieces
Part No 7800.001.010
Vacuum SetDS250 Vacuum Seal/Vacuum Plug Part No 7800.100.005
Quick ReleasePrecision Motor Mount DS250For DDM4Part No 7800.200.002
D100, DD130, DCM1 & DD80 1/2” BSP(F) toHilti Bayonet (converts standard 1/2” BSP(M)wet core to fit to Hilti bayonet system)Part No 340.100.0044
1/2” BSP(M) to 1/2” BSP(M) AdaptorPart No 340.101.0023
Adaptor DDBU - UNC 1 1/4” Part No 340.101.0059
Extension 300mm 1 1/4” UNC (F)to 1 1/4” UNC (M)Part No 330.101.0005
Combi Core Guide Rod 16 x 350mmPart No 340.101.0210
Combi Core Guide Rod 16 x 450mmPart No 340.101.0211
300mm Extension 1/2” BSP (F-M) Part No 330.101.0002
WITH
MARCRISTSERVICEVOUCHERS
WITH
MARCRISTSERVICEVOUCHERS
ACCESSORIES FOR DRYDRILLING
Adaptor5/8” x 16 UNF to1/2” BSP (M)
340.101.0001
Combi UnitDust Extraction Unit: 1/2” BSP (M)
320.101.0050
300mm Pilot Drill for Dust Extraction Unit
310.101.0015
Combi UnitDust Extraction Unit: 1 1/4” UNC (M)
320.101.0055
Adaptor1/2” x 20 UNF to 1/2” BSP (M)
340.101.0002
AdaptorM18 x 2.5 (F) to 1/2” BSP (M)
340.101.0003
Adaptor1/2” BSP (F) to 1/2” BSP (M)
340.101.0004
Adaptor3 Jaw Chuck to 1/2” BSP (M)
340.101.0005
AdaptorSDS to1/2” BSP (M)
340.101.0006
Adaptor1/2” BSP (M) to 1/2” BSP (M)
340.101.0023
Extension Bar250mm Extension 1/2” BSP (F-M) A-Taper
330.101.0006
225mm A-Taper Pilot Drill310.101.0013
Drift Key
350.101.0002
MARCRIST ADAPTOR
The Hardest Lasts the LongestBecause Marcrist cores last much longer, our adaptors have tolast too. Marcrist have developed the world’s hardest, longestlife adaptors.
MARCRISTTHE SUCCESS FORMULA!Marcrist machines + Marcrist cores + 5 years no costs
THE PERFECT SOLUTION! The machines - 5 years no cost
- Free maintenance - Free service - Free repairs
+The cores - Extreme speed
- Extreme life- Perfectly synchronised with the machines
=The result - A system with outstanding performance.
No costs for 5 years and cores that offer the lowest costper hole drilled.
OR YOUR MONEYBACK!
WITH
MARCRISTSERVICEVOUCHERS
WITH
MARCRISTSERVICEVOUCHERS
THE CORES Absolutely world breaking technology extremely fast, long life,high tech in every detail.
• Patented segment design
• Ultra precise
• Precision balanced
• Made in Great Britain for hard British concrete
• Swiss precision.
Mishaps can happen when diamond drilling, cores getdamaged segments can tear off!
With conventional cores you bearthe cost and write the core off!
Marcrist repairall Marcristcores FREE*. Weeven pay thepostage back toyou.
*Providing the remainingsegment height is not less
than 4mm.
THE CORE GRADES
CCW850X
Hand & Rig Mounted
Fast
1500 – 2500 watt
Standard
Reinforced Concrete
Concrete
Brick
Block
Granite
Engineering Brick
Concrete Bricks
Natural Stone
Lintels
Kalksandstein
Poroton
Composite Brick &
Concrete
Concrete Pipes
Dry
Type
Application
Performance
Ideal Machine Power
Materials
SpecialsUniversal
WCU850X
Rig Mounted
Fast and Long Life
1500 – 3000 watt
Heavily
Reinforced Concrete
Concrete
Brick
Block
Granite
Engineering Brick
Concrete Bricks
Natural Stone
Lintels
Kalksandstein
Poroton
Composite Brick &Concrete
Concrete Pipes
WF850X
Rig Mounted
Fast and Long Life
2500 – 3500 watt
Extremely Heavily Re-
inforced Concrete
Flint
WA850X
Rig Mounted
Extreme Long Life
1500 – 3000 watt
Asphalt
Extreme
Abrasive Materials
CCU850X
Hand Held
Extreme Speed
800 –1500 watt
Lightly Reinforced
Concrete
Concrete
Brick
Block
Engineering Brick
Concrete Bricks
Natural Stone
Lintels
Kalksandstein
Poroton
Concrete Pipes
WET/DRY WET WET WET DRY/WET
DCU750X
Hand Held
Extreme Speed
800 –1500 watt
Concrete
Brick
Block
Engineering Brick
Concrete Bricks
Natural Stone
Lintels
Kalksandstein
Poroton
DRY
MARCRIST CORE PERFORMANCE To establish conclusively how Marcrist compare, wecomissioned TÜV to witness the testing of Marcrist Coresand Machines against the best of the rest.
Test MaterialConcrete 65 Newtons125mm depthLimestone Aggregate
Hilti
DD100
DD80 RAL
P4
64 secs
Brand
Motor
Stand
Core Drill type
Time per hole*
Ø 52mm
Hilti
DD200
DDHD 30
P4
57 secs
Brand
Motor
Stand
Core Drill type
Time per hole*
Marcrist
DDM4
DS250
WCU
38 secs
Ø 102mm
* Time per hole is average time of 100 holes. * Time per hole is average time of 100 holes.
Marcrist
DDM3
DS150
WCU
41 secs
Marcrist 56% Faster Marcrist 50% Faster
CORE PRICES
CCW850X1 1/4” UNC (F) Hand Held Wet CoreConcrete/reinforced concrete & all building materials.
CORE PRICES
WCU850X-F Crown1/2” BSP (M) Hand Held/Machine Mounted Wet CoreConcrete/reinforced concrete, flint concrete, natural stone, & all building materials.
260.001.0012 12 200
260.001.0014 14 200
260.001.0016 16 200
260.001.0018 18 200
260.001.0020 20 350
260.001.0022 22 350
260.001.0024 24 350
260.001.0025 25 350
260.001.0028 28 350
260.001.0030 30 350
260.001.0032 32 350
260.001.0035 35 350
Part No. Ø Lengthmm mm262.142.0038 38 350
262.142.0048 48 350
262.142.0052 52 350
262.142.0060 60 350
262.142.0065 65 350
262.142.0072 72 350
262.142.0078 78 350
262.142.0082 82 350
262.142.0091 91 350
262.142.0102 102 350
262.142.0112 112 350
262.142.0117 117 350
262.142.0127 127 350
262.142.0132 132 350
262.142.0152 152 350
262.142.0162 162 350
262.142.0182 182 350
262.142.0200 200 350
Part No. Ø Lengthmm mm
350mm
9mm
350mm
9mm
WITH
MARCRISTSERVICEVOUCHERS
WITH
MARCRISTSERVICEVOUCHERS
WITH
MARCRISTSERVICEVOUCHERS
WITH
MARCRISTSERVICEVOUCHERS
The longest lasting wet core you have ever used or your money back.
CORE PRICES
284.001.0052 52 450
284.001.0060 60 450
284.001.0065 65 450
284.001.0078 78 450
284.001.0082 82 450
284.001.0102 102 450
284.001.0112 112 450
284.001.0122 122 450
284.001.0127 127 450
284.001.0132 132 450
284.001.0138 138 450
284.001.0152 152 450
284.001.0162 162 450
284.001.0182 182 450
284.001.0200 200 450
284.001.0225 225 450
284.001.0250 250 450
284.001.0300 300 450
Part No. Ø Lengthmm mm
WCU850X1 1/4” UNC (F) Machine Mounted Wet CoreDrills: concrete/reinforced concrete, flint concrete, natural stone, & all building materials.
CORE PRICES
CCU850X1/2 " BSP (F)Dry/Wet Drilling
Drills: concrete/lightly reinforced concrete, flint concrete, natural stone, & all building materials.
WITH
MARCRISTSERVICEVOUCHERS
WITH
MARCRISTSERVICEVOUCHERS
WITH
MARCRISTSERVICEVOUCHERS
WITH
MARCRISTSERVICEVOUCHERS
450mm
9mm 8mm
165mm
249.122.0022 22 400
249.122.0028 28 400
249.122.0032 32 400
249.122.0038 38 165
249.122.0048 48 165
249.122.0052 52 165
249.122.0060 60 165
249.122.0065 65 165
249.122.0072 72 165
249.122.0078 78 165
249.122.0082 82 165
249.122.0091 91 165
249.122.0102 102 165
249.122.0107 107 165
249.122.0112 112 165
249.122.0117 117 165
249.122.0127 127 165
249.122.0132 132 165
249.122.0152 152 165
249.122.0162 162 165
249.122.0181 181 165
249.122.0202 202 165
Part No. Ø Lengthmm mm
CCW850X1 1/4” UNC (F) Dry Drilling
Pipe Drilling
Extreme Speed & Extreme Life
PIPE DRILLING
Part No. Ø Lengthmm mm
Accessories for Pipe Drilling
310.101.0015 300mm Pilot Drill
340.101.0023 Adapter 1/2” BSP(M)for 1/2” BSP(M)
350.101.0002 Drift Key
340.101.0115 300mm Guide Rod
Part No. Description
9mm
165mm
252.122.0022 22mm 400mm
252.122.0028 28mm 400mm
252.122.0032 32mm 400mm
252.122.0038 38mm 165mm
252.122.0048 48mm 165mm
252.122.0052 52mm 165mm
252.122.0060 60mm 165mm
252.122.0065 65mm 165mm
252.122.0072 72mm 165mm
252.122.0078 78mm 165mm
252.122.0082 82mm 165mm
252.122.0091 91mm 165mm
252.122.0107 107mm 165mm
252.122.0117 117mm 165mm
252.122.0127 127mm 165mm
252.122.0132 132mm 165mm
252.122.0152 152mm 165mm
252.122.0162 162mm 165mm
Part No. Ø Lengthmm mm
WITH
MARCRISTSERVICEVOUCHERS
WITH
MARCRISTSERVICEVOUCHERS
CORE PRICES
DCU750X1/2” BSP (F) Fast Dry Core
Drills: concrete, natural stone, & all building materials.
7mm
165mm
286.142.0102 102 165
286.142.0138 138 165
286.142.0152 152 165
286.142.0162 162 165
286.142.0186 186 165
286.142.0200 200 165
286.142.0212 212 165
286.142.0225 225 165
286.142.0257 257 165
TURBOLITE1/2” BSP (F) Dry Core
Drills: brick & most building materials.
WITH
MARCRISTSERVICEVOUCHERS
WITH
MARCRISTSERVICEVOUCHERS
DIAMOND DRILLINGSPECIALS
Extreme ReinforcingExtreme FlintWCU 850X+ 8%
Re-tipping with MarcristGuaranteeRe-tipping saves you money and helps the environment,
The Marcrist re-tipping service includes:
• Re-Balancing• Re-Tipping• Repair as required• Dressing
Following the mechanical overhaul, the core comes with theMarcrist guarantee:
Free core repairsGuarantee also on re-tipsRe-tipping prices apply to any brand of core!
Special Size/Extra Length - Available on request
AsphaltRefractoriesWCU 850X+ 8%
WF850X
WA850XT01.000.0038 38mm 165mm
T01.000.0052 52mm 165mm
T01.000.0065 65mm 165mm
T01.000.0107 107mm 165mm
T01.000.0117 117mm 165mm
T01.000.0127 127mm 165mm
T01.500.001 Turbolite 11 Piece Dry Core Toolbox
T01.500.002 Turbolite 9 Piece Dry Core Toolbox
Part No. Ø Lengthmm mm
CORE PRICES7mm
165mm
Core drills Ø 38, 52, 65, 117, 127mmand 6 accessories (SDS Adaptor 88mm& 240mm, 3 Jaw Chuck Adaptor88mm & 240mm, Drift Key, Pilot Drill200mm)
Core drills Ø 38, 52, 117 and 6accessories (Drift Key, SDS to 1/2”BSP (M) Adaptor, 3 Jaw Chuck to1/2” BSP (M) Adaptor, 225 mm PilotDrill, 22 & 28 mm Spanners)
TRAININGBOOKLETWith every Marcrist drillingmachine you receive acomprehensive DiamondDrilling, problem solvingmanual FREE!
TECHNICAL HOTLINE Marcrist has been the leader in diamondcutting, drilling and grinding technologyfor 30 years!
Our experts are only a phone call away.
Tel: 01302 893253
FREE ONE MONTH TEST30 DAY MONEY-BACKGUARANTEEThere are many, many diamond suppliers all claiming tosupply quality.
The only way to see the difference is in trying!
This is why we give you your Marcrist machine and cores for a whole month to test.
If, having tested, you are not 100% satisfied,we will give you your money back.
WITH
MARCRISTSERVICEVOUCHERS
WITH
MARCRISTSERVICEVOUCHERS
In most cases we will be able to help over the phone. If not, we will have someone on site and our visit is FREE!
DIAMOND DRILLING FREE TRAINING
Diamond Drilling Certificate
We herewith confirm that
....................................................……………………
has attended a training course
in diamond drilling.
MARCRIST INTERNATIONALLIMITED
Signed…………….......................…. Date: …………
Learn how to make the most of your Marcrist Diamond Drillingmachine and its cores.
The purchase of every Marcrist DDM3 and DDM4 drillingmachine entitles one operator to take part in a diamonddrilling training course near you!
Ask your dealer for the next venues near you!
EXPERIENCE THE DIFFERENCE
Seeing is believing!The quality and performance of Marcrist diamondmachines and cores has to be seen to be believed.
Your professional Marcrist distributor offers in storedisplays, tests and demonstrations.
Alternatively, we will visit your site to drill in competition with your existing core.
If we cannot prove that Marcrist cores offer the lowest cost per hole.
You can have a Marcrist core FREE!*
* Diameters 50mm – 100mm of your choice!
NOTES NOTES