8/9/2019 DI-704P_QIG_v1.00

1/11

Before You Begin1. If you purchased this router to share your high-speed Internet connection with

other computers, you must have an Ethernet-based Cable/DSL modem with an

established Internet account from an Internet Service Provider (ISP).2. Its best to use the same computer that is connected to your modem for

configuring the DI-704P router. The DI-704P Router acts as a DHCP server andwill assign all the necessary IP address information on your network. SeeAppendix at the end of this Quick Installation Guide or the Manual on theCD-ROM for setting each network adapter to automatically obtain an IPaddress.

Check Your Package Contents

These are the items included with your DI-704P purchase:

2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respectiveholders. Software and specifications subject to change without notice. DI-604.05082002

This product can be set up using any current

web browser, i.e., Internet Explorer 5x,Netscape Navigator 4x. DI-704PExpress EtherNetwork

Broadband Router

DI-704P Ethernet Broadband Router

CD-ROM (containing Manual and Warranty)

Ethernet (CAT5 UTP/Straight-Through) Cable

5V DC, 2A Power AdapterUsing a powersupply with a

different voltage ratingwill damage and voidthe warranty for thisproduct.

If any of the above items are missing, please contact your reseller.

8/9/2019 DI-704P_QIG_v1.00

2/11

Connecting The DI-704P BroadbandRouter To Your NetworkA. First, connect the power adapter to the receptorat the side panel of

the DI-704P and then plug the other end of the power adapter to a

wall outlet or power strip. The Power LED will turn ON to indicateproper operation.

B. Insert one end of an Ethernet cable to the WAN port on the backpanel of the DI-704P and the other end to the Ethernet port located onyour Cable or DSL modem. The WAN LED light will illuminate toindicate proper connection.

C. Insert one end of an Ethernet cable to LAN port 1 on the back panelof the DI-704P and the other end to the Ethernet port on the networkadapter in the computer you will use to configure the DI-704P. The

LED light for LAN Port 1 will illuminate to indicate proper connection.(Note: Some computers already have network adapters pre-installed.)

D. The parallel port on the DI-704P is used to connect printers only.Connect one end of the printer cable to your printer and the other endto the DI-704P.

Restart Your Computer

C.LAN PortsThese are the

connections forEthernet cables to

your Ethernet-enabled computers

A. Receptor for

Power Adapteris located on theside.

Reset ButtonPressing this buttonrestores the router

to its original factorydefault settings.

B.WAN PortThis is the

connection for theEthernet Cable to

the Ethernet Port onthe Cable or DSL

Modem.

D.Printer PortYou can connect a

Printer to theParallel Port here.

8/9/2019 DI-704P_QIG_v1.00

3/11

Connecting Additional Computers To TheDI-704P Broadband RouterUsing additional Ethernet (CAT5 UTP/Straight-Through) cables, connect

your Ethernet-equipped computer(s) to one of the 3 remaining EthernetLAN ports on the back panel of the DI-704P.

When you have completed the steps in this Quick Installation Guide, yourconnected network should look similar to this:

LAN Port LEDs.Each of theLAN ports on the back of theDI-704P have a correspondingLED light on the front panel ofthe unit. When a properconnection has been made to

a computer that is ON, theLED on the front panel shouldilluminate.

Cable or DSLModem

DI-704P EthernetBroadband Router

Computers connectedto the LAN Ports

Connect a printerto the parallel port

For optional printer setup, please refer tothe DI-704Ps Manual

8/9/2019 DI-704P_QIG_v1.00

4/11

Using The Setup Wizard

The logon pop-upscreen will appear.

Once you havelogged in, theHome screenwill appear.

Open your Webbrowserand type

http://192.168.0.1 intothe URL address box.Then press the Enter orReturn key.

Typeadmin for theusername and leave thepassword field blank.

ClickOK

DI-704P

ClickRun Wizard

8/9/2019 DI-704P_QIG_v1.00

5/11

You will see the followingscreens.

Set password. You have the option to establish a new admin password for the DI-704P

ClickNext

ClickNext

8/9/2019 DI-704P_QIG_v1.00

6/11

The Setup Wizard (continued)

Select the type of Internet connection for your router.

If you selected DynamicIP Address, this screenwill appear:

If you are unsure of which setting toselect, please contact your InternetService Provider.

What is a MAC address?Eachnetwork adapter has a discreteMedia Access Control (MAC)

address. Note that some computersand peripherals may already includebuilt-in network adapters.

ClickNext

ClickNext

Click the Clone MACAddress button toautomatically copy the MACaddress of the network adapterin your computer. You can alsomanually type in the MACaddress.

Selectone ofthese settings

8/9/2019 DI-704P_QIG_v1.00

7/11

If your ISP requires aStatic IP Address, andthis option is selected,then this screen willappear:

If your ISP uses PPPoE(Point-to-Point Protocolover Ethernet) and thisoption is selected, thenthis screen will appear:

Enter in the usernameand password providedto you by your ISP.

Do not use

the numbers

displayed in these

fields. They are only

shown as an example.

ClickNext

Enter the IP addressinformation originallyprovided to you by your ISP.You will need to complete all

the required fields.

ClickNext

8/9/2019 DI-704P_QIG_v1.00

8/11

8/9/2019 DI-704P_QIG_v1.00

9/11

APPENDIXTo connect to the network, make surethe network adapter in your computeris configured properly. Heres how toconfigure the network adapter to obtainan IP address automatically for the

DI-704P Broadband Router.

ForMicrosoft Windows XP:Go to Start > right click onMy Network Places >select Properties > Double-click onthe Network Connection associatedwith the Ethernet adapter (i.e.,D-Link DFE-530TX+).

ClickInternet Protocol (TCP/IP)

ClickProperties

Select Obtain an IP addressautomatically

Click OKRestart yourcomputer

8/9/2019 DI-704P_QIG_v1.00

10/11

ForApple Macintosh OS X:

Go to the Apple Menuand Select SystemPreferences.

The IP address information,the Subnet Mask, the Routers

IP address and the Ethernetadapter address will appear.

Click onNetwork

SelectBuilt-inEthernet in the Showpull-down menu

SelectUsing DHCPin the Configure pull-down menu

Click on

Apply Now

8/9/2019 DI-704P_QIG_v1.00

11/11

Technical SupportYou can find the most recent software and userdocumentation on the D-Link website.

D-Link provides free technical support for customerswithin the United States for the duration of the

warranty period on this product.

U.S. customers can contact D-Link technical supportthrough our web site or by phone.

D-Link Technical Support over the Telephone:(877) 453-5465

24 hours a day, seven days a week

D-Link Technical Support over the Internet:http://support.dlink.com