Introduction

Advantages

1. Connect the wires to the battery to operate the car platform.2. Insert the plug of the AC adapter into a wall outlet.3. Move the first car into the bottom platform.4. Lower down the platform using controller.5. Turn on the switch to rotate the turntable into 180o.6. Move the second car to the top platform once the platform is lower down.Group Members:Tan Chia LunLeong Teik SernNg Chun KitChan Wei YeapSuriyaa KumarCar Parking Lift System

Rotates up to 180o for ease purpose

Less Power Consumptions

Time Consumption is less than 10 seconds

High stability when the platform move upwards or downwards.Operation Manual

A car parking system is a mechanical device that multiplies parking capacity inside a parking lot. This system is less expensive per parking slot, since they tend to require less building volume and less ground area than a conventional facility with the same capacity. Stress out to find a parking?!AC Induction Motor with gearhead ratio 1 to 250To rotate the turntable at low revs/min.

DC MotorTo power up the scissors jack.Nylon TurntableAct as a rotating platform.

No Parking?Scissors JackAct as a lifting mechanism. (Up/Down)

Transition GearTo transfer the torque from DC motor to screw bolt.Why cant there have more parking?

Car BatteryA power source for DC motor.

With complimentsSupervisor: Mr. KhairulSpecial Thanks: Dr. Jessie Siaw: Dr. Yau: Dr. LaiFACULTY OF ENGINNERING AND BUILT ENVIRONMENT