device servers serial to lan - mh-monitoringcontrol.com · ally any industrial device with serial...

www.mh-monitoringcontrol.com

MONITORING & CONTROL the expert approach

Device ServersSerial to LAN



XPress DR-PB Device Link

Specifications: see next page

Remotely Configure, Program, Monitor, and Manage:

PLCs, drives, process controls, power monitoring

equipment, barcode scanners, and other factory floor

serial devicesThe XPress DR and XPress DR-IAP Device Servers enable virtu-ally any industrial device with serial capability to be connected to a new or existing Ethernet network. By encapsulating serial data and transporting it over Ethernet, the XPress DR/DR-IAP es-tablishes virtual serial links over Ethernet. By using these units, limited-distance, point-to-point, direct serial connections can now be extended within the plant, throughout the facility, or across the global enterprise.

When used in conjunction with an OPC server, most Win-dows® based HMI, SCADA, and PC-based control applications have full access to information in the connected device. Existing COM-port based Windows® applications can access network-enabled devices using our Com Port Redirector software. Redi-rector software allows the creation of virtual serial ports, which can be mapped to the remote device servers over Ethernet and connected to the XPress DR and XPress DR-IAP.

The XPress DR-IAP installable communication drivers allow spe-cific support for various industrial communication protocols. With native support for these protocols, devices that previously allowed only one connection can now support multiple connec-tions simultaneously.Flexible configuration options allow the unit to be set up locally using the serial port, or remotely over Ethernet using Telnet or a common web browser.Included Windows® based configuration software simplifies the process of installing communication drivers and configur-ing them for use with attached devices. Flash memory provides for maintenance-free, non-volatile storage, and allows future system upgrades.

Packaged in a rugged DIN-rail mount case and featuring 2000V galvanic isolation, 1500V Ethernet isolation, a wide 0° to 60°C operating range, and a 9-30VDC/9-24VAC pow-er input, the XPress DR and XPress DR-IAP are ideal for any industrial application.

Features

Connect enterprise (ERP, MES) systems to factory floor de-•vices without disturbing existing control networks

Allow remote firmware upgrades, saving money and time •from manual upgrades

IAP version supplies many industrial communication pro-•tocols

Configurable serial interface supports RS-232, RS-422, or •RS-485

10Base-T/100Base-TX Ethernet (RJ45)•

Isolated serial and Ethernet ports•

FM-approved for hazardous locations Class I, Div.2•

RoHS compliant•



Mulder-Hardenberg, est. 1927, is the answer to professional demands in the domain of elec-tronic related environments. We don’t just sell products. We use our multidiscipline knowledge to provide the best possible solution, designed to your specific interest.

Contactdetails:

The NetherlandsMulder-Hardenberg B.V.Westerhoutpark 1a2012 JL HaarlemTel.: +31 23 531 91 [email protected]

Belgium, France, LuxemburgMulder-Hardenberg N.V.Hoge Weg 129B-2940 StabroekBelgiumTel.: +32 3 660 13 [email protected]

GermanyMulder-Hardenberg GmbHNordring 13D-65719 Hofheim/TsTel.: +49 6192 - 97 91 [email protected]

Our Websites

• mulder-hardenberg.com

• mh-hminterfaces.com

• mh-fiberoptics.com

• mh-labeling.com

• mh-networking.com

• mh-powersupplies.com

• mh-securitysystems.com

• mh-monitoringcontrol.com

• mh-cablemanagement.com

• mh-engineeringcomponents.com

Specifications

Serial Interface Interface: RS-232, RS-422, or RS-485. Connector: Screw terminals or RJ45Data Rates: 300 to 115,200 bps. Characters: 7or 8data bits. Parity: odd, even, noneStop Bits: 1or 2. Flow Control: Software: XON/XOFF. Hardware: RTS/CTSInstallable Serial Protocols (XPress OR-lAP only)

Network Interface Standards: ARP, UDP/IP. TCP/IP, ICMP, SNMP, BOOTP, DHCP, TFTP, Telnet and HTTPInterface: 10Base-T/100Base-TX Ethernet. Connector: RJ45Installable application layer protocols (XPress DR-IAP only)

Indicators (LED) Ready, Fault/Configuration, Activity, link, Serial Transmit Data, Serial Receive Data

Management SNMP. serial, Telnet, and HTTP (web browser)

Isolation Ethemet: 1500 Vrms. Serial: 2000 Vrms

Power Input: 9to 30VDC/9-24VAC, 3W maximum. Connector: Screw terminals for power and ground

Environmental Temperature: 0° to 60°C. Humidity: 20% to 90% RH, non-condensing (Operating)

Form Factor Mounting: DIN-rail (35 mm). Material: High-impact plastic. Dimensions: 60 x36 x90 mm

Software Included Windows® 95/98/ME/NT12000-based configuration software simplifies initial setup

Agency Approvals Ul, CSA, TUV, FCC, CE

Warranty 1-Year Limited

Partnr.

XSDRSN-02XSDRIN-02

XPress-DR: standard partXPress-DR-IAP with installable industrial protocols

Industrial Device Server, DIN-rail mounting, serial interface (RS-232, RS-422, RS-485 - terminal block or RJ45), 1OBase-T11OOBase-TX Ethernet, diagnostic lEDs, 9VDC to 30VDC power input, CO-ROM with configuration tools, installable communication drivers, and Installation Guide.

Specifications are subject to change without notice.



XPress DR+ Industrial Device Server


Network All Your Industrial Equipment – Quickly and

Easily!For demanding factory applications, Lantronix introduces the XPress-DR+™ industrial device server. The XPress-DR+ enables users to remotely configure, monitor and control PLCs, drives, motion controllers, power equipment, barcode scanners and other serial devices from anywhere over the Net.A versatile, powerful tool for remote management of auto-mation and assembly/packaging equipment at manufacturing sites, automated distribution centers, refinery plants – or any industrial setting – it provides complete access and control of virtually any type of equipment with a serial port!

Extending Network Connectivity with SwitchPort+Supporting two serial ports and two 10/100 Ethernet ports, the XPress-DR+ features patent-pending SwitchPort+™ technol-ogy which enables multiple industrial serial devices to be daisy chained (cascaded) from a single network backbone connec-tion. SwitchPort+ combines Lantronix advanced device server technology with Ethernet switching technology to provide a robust and reliable method for networking equipment.Saves time and money by avoiding unnecessary cable runs and eliminates serial cable distance limitations.

Standards Based CommunicationsUsing an open Ethernet architecture as a standard for device communication provides the flexibility to communicate to virtu-ally any type of industrial equipment.Additionally it enables new equipment to be quickly and easily incorporated into existing network system designs.When used in conjunction with an OPC server, most Windows® based HMI, SCADA and PC-based control applications have full access to information in the connected device. Existing COM-port based Windows applications can access network-enabled devices using Lantronix Com Port Redirector™. This specialized software creates virtual serial ports, which are mapped to the XPress-DR+ over Ethernet.

Thrives in the Industrial EnvironmentThe XPress-DR+ meets the demanding, complex industrial en-vironment head on. Packaged in a rugged DIN-rail mount case, it’s equipped with isolated serial and Ethernet ports and screw terminal connectors for serial and power. It supports industrial protocols such as Modbus TCP, Modbus ASCII, Modbus RTU and DF1, and is FM-approved for hazardous locations Class 1, Div. 2.• 15KV serial ESD protection and 2.5KV Ethernet isolation pro-

tects circuitry from overcurrent conditions

• Wide -40°– 70°C operational temperature range• 9-30 VDC and 9-24 VAC power input options

Configuration FlexibilityFlexible configuration options allow the unit to be set up locally using the serial port, or remotely over Ethernet using Telnet or browser. The included DeviceInstaller™ software simplifies the process of installing industrial protocols and configuring them for use with attached devices. The CPU’s flash memory provides maintenance-free, non-volatile stor-age and easily accommodates future system upgrades. Complete with an auto MDI/MDIX Ethernet interface, the XPress-DR+ is a powerful device communication solution that’s perfect for your most demanding industrial applica-tions.

Features

Cascade multiple devices from a single network connec-• tion

Connects enterprise systems to non-networked factory • floor devices

Enables remote firmware upgrades, saving time and mon-• ey

Supports industrial protocols•

Maximizes flexibility with an internal 2-Port 10Base-• T/100Base-TX Ethernet switch

15KV serial ESD protection and 2.5KV Ethernet isolation•

Wide -40°– 70°C operational temperature range•

RoHS compliant•

RoHS compliant•




Contactdetails:




Our Websites




• mh-labeling.com







Specifications

Serial Interface 2RJ45 RS-232 Serial Ports. Baud rate selectable from 300 to 230 Kbps1screw terminal RS-422/485 interface on Serial Port 2 (2 and 4-wire support)LED indicators for TXD and RXD activities

Serial Line Formats Characters: 7or 8data bits. Stop bits: 1or 2. Parity: odd, even, none

Flow Control Hardware: RTS/CTS. Software: XON/XOFF

Modem Control DTR, DSR

Network Interface 2RJ4510Base-T/l00Base-TX Ethernet ports. Embedded, unmanaged, fully compliant 802.3u non-blocking Ethernet switch. Store and forward architecture with 1KMAC address lookup table. Automatic MDI/MDI-X crossover. Full duplex IEEE 802.3x flow control. Half duplex back pressure flow control. IEEE 802.1d spanning tree

LED Indicators TX/RX activity per serial. Link/Activity per Ethernet port. Power/System OK

Management Internal web server (standard tunneling firmware only). SNMP (read only). Serial login. Telnet login. Devicelnstaller software

Isolation 8KV direct contact, 15KV air discharge, ESD protection on all Serial ports (IEC 1000-4-2, IEC 61000-4-2). 2KVAC / 2.8K VDC galvanic isolation between Power Input port to Ethernet ports (except Chassis ground). 2KVAC / 2.8K VDC galvanic isolation between Power Input port to Se-rial ports. Transient Voltage protection and ESD with max nonrepetitive surge current 800 Amp (8/20 µs) (IEC 61000-4-2). 2KVA / 2.8K VDC galvanic isolation between Ethernet ports (except chassis ground). 2KVA / 2.8K VDC galvanic isolation between Ethernet ports to Serial ports40 A(5/50 ns) EFT protection (IEC 61000-4-4), 12A(8/20 µs) lightning protection (IEC 61000-4-5) on all Ethernet ports

Power Removable screw terminal block connector 9-30 VDC or 9-24 VAC with chassis ground 2.3 Watts maximum

Environmental Temperature: -40°C to +70°C. Humidity: 20% to 90% relative humidity, non-condensing

Protocols Supported ARP, UDP/IP, TCP/IP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP, and HTTP

Installable Industrial Application Protocols: ModBus TCP, ModBus ASCII/RTU, DF1 Multi-Master

CPU Lantronix DSTNI-EX 48 MHz clock, 256 KB SRAM Internal CPU Memory

Flash Memory 2MB Flash

EEPROM / Reset 2KB / Front panel recessed push button

Form Factor Case: High-impact plastic case with integrated DIN Rail (35 mm) mount. IP30 enclosure ratingDimensions: (LxWxH): 88 x 57 x 123 mm, terminal blocks included. Weight: 0.21 kg

Agency Approvals UL, CSA, FCC, CE, TUV, Click, VCCI


Partnr.

X5DR22000-01 XPress-DR+ two port industrial device server with dual switched Ethernet ports and industrial protocols




xDirect Device Server


Network Connectivity for any Serial Device ‘Right on the

Wire’xDirect™ is a sleek and compact Serial-to-Ethernet device server, providing quick and easy Ethernet connectivity to virtually any device or machine with a serial interface.

With an integrated Ethernet port and serial cable, multiple power options including PoE, and an industry-best five year warranty, xDirect provides a portable, extremely flexible, and highly affordable network connectivity solution.xDirect comes with a built-in web server that enables users to access and configure the unit using a standard web browser on a PC, smartphone, or tablet from anywhere.With plug-and-play simplicity, small form factor, multiple power options, and a robust device server application, xDirect provides the easiest and shortest path to network connectivity ‘right on the wire’.

Features

Complete Network Connectivity Solution•

Integrated 10/100 Ethernet Port and Serial Cable•

Complete Device Server Application with Full IP Stack and •Web Server

Space Saving Form Factor•

Serial Data Rate of up to 921.6 Kbps•

128/192/256-bit AES Encryption•

Flexible Power Options including PoE•

Extended Temperature Range of -40° to 85°C•

5-year Limited Warranty•




Contactdetails:




Our Websites




• mh-labeling.com







Specifications

Serial Interface Modes: RS232, RS422* or RS485* (2 and 4 wire support). Baud Rate: 300bps to 921.6 KbpsCharacters: 7 or 8 data bits. Stop Bits: 1 or 2. Parity: Odd, even, moreModem Control Signals: DTR, DSR/DCD. Flow Control: XON/XOFF (software), CTS/RTS (hardware). *Available on xDirect485 & PoE models

Serial Connectors Single-port: DB9F (DCE Pinned)

Ethernet Interface Interface: 10Base-T /100Base-T (Auto-sensing). Speed: 10/100 MbpsConnector: RJ45. Protocols: UDP, TCP, ARP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP, Auto IP, HTTP, Telnet Com Port Control

Indicators (LED) Power/Status, Link, Activity, Serial RX Activity & TX Activity

Processor CPU: Based on DSTni-EX Enhanced 16-bit x86 Architecture. Memory: 256 KB SRAM, 1 MB Flash

Power Input Voltage: 5V at mini-USB-B jack. Input Voltage: 5-15 VDC at DB9F pin 9Power Consumption: 1.3W max w/o PoE, 2.0W max with PoE

Environmental Operating Temperature: -40° to 85°C, non-PoE models, -40° to 70°C, PoE modelStorage Temperature: -40° to 85° CRelative Humidity: 0% to 90% non-condensing

Form Factor Dimensions (LxWxH): 86.6x30x29 mm. Weight: 0.068 kg

Included Software Windows 7/Vista/XP/2008 Server/2003 Server (32-bit and 64-bit versions), DeviceInstaller™ configuration software, Com Port Redirector software and related utilitiesConfiguration Options: Web Browser, Telnet Client, Serial Terminal

Security 128/192/256-bit AES Encryption

Isolation and Protection

Serial Port: 15 KV ESD protection on RS232 and RS422/485 transceiversEthernet Port: 1500 VAC isolation shielded. PoE: 1500 VAC isolation

Regulatory Ap-provals

Emissions: FCC Part 15, Subpart B, Class B. EN55022, Class B. EN61000-3-2, EN61000-3-3. ICES-003 Issue 4. AS/NZS CISPR22Immunity: EN55024. EN61000-4-2, EN6100-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11Agency Approvals: UL 60950-1, 2nd Edition, CAN/CSA C22.2 No. 60950-1-07, 2nd EditionCE, VCCI, C-Tick, IEC 60950-1 2005, 2nd Edition


Partnr.

XDT2321002-01-S

XDT4851002-01-S

XDT10P0-01-S

Accessories140-448-R520-119-R

xDirect232 Single Port RS232 10/100 Device Server, 100-240 VAC International Power Supply with Regional Adapters, RoHS

xDirect485 Single Port RS232/422/485 10/100 Device Server, 100-240 VAC International Power Supply with Regional Adapters, RoHS

xDirect PoE Single Port RS232/422/485 10/100 Device Server, No Power Supply, RoHS

Mini DB9M-M Gender Changer, Null Modem with Pin 9, RoHSPower Supply, 100-240 VAC, 50-60Hz, 5VDC 1A, Mini USB-B Right Angle, 4 Regional Adap-ters, Level V, RoHS




UDS1100-IAP Industrial Device Server


Remotely Monitor, Manage and Control Industrial

Equipment over the NetThe UDS1100-IAP is a rugged and powerful tool which enables users to connect, manage and control just about any piece of industrial equipment from virtually anywhere over Ethernet or the Internet. This single-port Device Server is a quick, simple and inexpensive way to bring the advantages of real-time or on-demand information access.

Standards Based CommunicationsUsing an open Ethernet architecture as a standard provides the flexibility for equipment to communicate to virtually any type of industrial device. When used in conjunction with an OPC server, most Windows® based HMI, SCADA and PC-based control ap-plications have full access to information in the industrial equip-ment networked by the UDS1100-IAP.

Extending Communications Across the GlobeOur approach to network-enabling devices is transparent to your attached equipment and software so you won’t need to change the way you work. Using a method called serial tun-neling, the UDS1100-IAP encapsulates serial data into packets and transports it over Ethernet. Serial tunneling can e done in multiple ways:• Using Lantronix supplied Com Port Redirector™ software,

Windows device applications not designed for network com-munications are re-directed to communicate to devices con-nected to the UDS1100-IAP.

• Connecting two UDS1100-IAP Device Servers configured to automatically talk to each other over the network creates vir-tual serial connections that can extend serial communications across a facility or around the world.

Built-in Web ServerThe built-in web server enables users to access and configure the UDS1100-IAP from a standard web browser. Web pages en-abling the UDS1100-IAP to be customized for unique applica-tions can be built using Lantronix development tools. On-board Flash memory provides room for future system software up-grades and maintenance-free, nonvolatile web page storage.

Easy to Set Up and UseThe UDS1100-IAP can be set up locally through its serial port, or remotely using Telnet or a web browser. The included DeviceIn-staller™ Windows-based configuration software simplifies setup and provides an easy way to:• Assign IP & other network specific addresses• Load custom web pages• Enable web-based configuration of the Device Server• Ping or query the attached device(s) over the network

• View specific device data files• Upgrade firmware• Simplify process of installing industrial protocolsComplete with an auto MDI/MDIX Ethernet interface, the UDS1100-IAP is a powerful device communication solution that’s perfect for your most demanding industrial applica-tions.

Modem ReplacementIn modem emulation mode, the UDS is used to replace dia-lup modems. The unit accepts modem AT commands on the serial port. It then establishes a network connection to the end device, leveraging network connections and band-width to eliminate dedicated modems and phone lines.RoHS-compliant, the UDS1100-IAP meets Directive 2002/95/EC on the restriction of the use of certain hazard-ous substances in electrical and electronic equipment. If you’re looking for a transparent, cost-effective, and scal-able means to network-enable your industrial automation equipment, look no further than the UDS1100-IAP.

Features

In minutes, securely connect factory floor devices to en-• terprise systems

Access, monitor and control equipment over Ethernet•

Replace dedicated PCs and/or modem lines with fast and • reliable Ethernet networking

Supports RS-232, RS-422 and RS-485 communications•

Includes Modbus TCP, ASCII, RTU and DF1 protocols•

15KV serial ESD protection•

Wide -40°– 70°C operating temperature range•

Environmentally-friendly RoHS and WEEE-compliant•




Contactdetails:




Our Websites




• mh-labeling.com







Specifications

Serial Interface Interface: Software-selectable RS232, RS422 or RS485 (2 and 4 wire support)Connectors: 1 DB25F DCE serial portData Rates: Software-selectable baud rate from 300 to 230 KBaudCharacters: 7 or 8 data bits. Parity: odd, even, none. Stop Bits: 1 or 2Control Signals: CTS/RTS (Hardware). Flow Control: XON/XOFF (Software)

Network Interface

Interface: 10Base-T/100Base-TX Ethernet port. Software selectable Ethernet speed 10/100/AutoSoftware selectable Half/Full/Auto duplex. Connector: RJ45Standards: ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP, TCP, UDP, and Telnet,TFTP

Indicators (LED) Power, 10/100 Link/Activity (green), 100/100 Link/Activity(green), Diagnostics (red), Status (green)

Processor CPU: Lantronix DSTNI-EX 48 MHz clock. Memory: 256 KB zero wait state SRAM, 2 MB Flash

Management Lantronix DeviceInstaller GUI, Serial login, SNMP, Telnet login, HTTP

Power 9-30 VDC or 9-24 VAC on barrel connector (1.5 Watts maximum consumption)9-30 VDC on DB25F serial interface. 3.3VDC on serial interface

Environmental Operating: -40° to 70°C. Storage: -40° to 85°C

Packaging Material: Metal enclosure with integrated wall mounts; optional 35 mm DIN-rail mount available. Dimensions (LxWxH): 9.0 x 6.4 x 2.3 cm. Weight: 0.2 kg. IP Rating: 30

Included Soft-ware

Windows® 98/ME/NT/2000/XP-based DeviceInstaller configuration software, Com Port Redirector™ software and related utilities

Emissions FCC Part 15 Subpart B Class A Radiated Emissions 30MHz – 1000MHzICES-003 Issue 4 February 2004 Class A Radiated Emissions 30MHz – 1000MHzAS/NZS CISPR 22: 2004 Class A Radiated Emissions 30MHz – 1000MHzEN55022: 1998 + A1: 2000 + A2: 2003 Class A Radiated Emissions 30MHz – 1000MHzVCCI V-3/2005.04 Class A Radiated Emissions 30MHz – 1000MHzEN61000-3-2: 2000 Class A Harmonic Current EmissionsEN61000-3-3: 1995 + A1: 2001 Fluctuations and Flicker

Immunity EN55024: 1998 +A1: 2001 +A2: 2003IEC_61000-4-2: 1995 ESD 8KV Air Discharge (Direct), 4KV Contact Discharge (Direct/Indirect)IEC_61000-4-3: 1995 Radiated Immunity 3.0V/m, 1KHz AM Sine Wave at 80%IEC_61000-4-4: 1995 EFT/Burst 1.0KV Power Lines, 0.5KV I/O LinesIEC_61000-4-5: 1995 Surge Immunity 1.0KV Common Mode, 1.0 KV Differential ModeIEC_61000-4-6: 1996 Conducted Immunity 3.0 Vrms, 80% AM Modulated (1KHz)IEC_61000-4-8: 1993 Magnetic Field Immunity 50Hz 1.0 Arms/mIEC_61000-4-11: 1994 Voltage Dips and Interrupts (>95%, 0.5 periods), (30%, 25 periods), (>95%,250 periods)

Isolation Designed with protection against transients and ESD for use under harsh environments.Serial Port: 15 KV ESD protection on RS232 and RS422/485 transceiversPower Input: Up to non-repeated 600 W 10/100 usec pulse protection against transient over voltagesEthernet Port: 1500 VAC isolation shielded with shield connected to chassis ground for signal integrity and ESD protection

Agency Ap-provals

FCC, C/UL, CSA, VCCI, CE,TUV, CTick


Partnr.

UD1100IA2-01 UDS1100-IAP Device Server, 100-240 VAC International power supply with regional adapters, includes 500-163 cable and ACDIN1001-01 Din rail mount

Accessories:500-163-RACDIN1001-01500-171-R

DB25M to DB9F serial cable (included)Optional DIN-rail mount (included)DB25M to RS485 and power input screw terminal adapter (order separately)


Sample Configurations



UDS1100/2100 Family Serial Device Servers


Reliable Device Servers for Affordable Serial-to-Ethernet

ConnectivityThe UDS family of device servers provides a hassle-free and in-expensive way to add Ethernet connectivity to virtually any de-vice with a serial interface. Designed from the ground up with ease-of-use in mind, each member of the UDS family enables users to connect to, monitor, and control their equipment from practically anywhere via a network or the Internet.

Available in one and two-port models, and equipped with flex-ible power options including PoE, the UDS makes it simple to network-enable equipment without changing the way you work. Supplied with Lantronix’ TruPort® COM Port Redirector software, UDS creates a fully transparent serial connection to existing PC-based software applications—making it possible to remotely connect to equipment already in the field as if it were connected to a local PC serial port.Additionally, every UDS is equipped with a built-in web server that allows users the flexibility to access, control, and configure remote equipment using a standard web browser.

Features

Provides a simple and cost effective serial-to-Ethernet connec-•tivity solution for virtually any device with an RS-232/422/485 serial interface

Delivers flexible power configurations eliminating the need •for costly power converters

Simplifies deployment with a tightly integrated, proven form •factor rated for use under harsh conditions

Enables interoperability with a versatile collection of ready-to-•use networking protocols

Provides new business intelligence from network-enabled •equipment




Contactdetails:




Our Websites




• mh-labeling.com







Specifications

Serial Interface Modes: RS232, RS422 or RS485 (2- and 4-wire configurations supported)Baud rate: 300 bps to 921.6 Kbps. Characters: 7 or 8 data bits. Stop Bits: 1 or 2Parity: odd, even, none. Flow Control: CTS/RTS, XON/XOFF

Serial Connectors UDS1100 (Single-port): 1 x DM25F (DCE). UDS2100 (Dual-port): 2 x DB9M (DTE)

Ethernet Interface Interface: 10Base-T/100Base-T. Speed: 10/100/Auto Mbps. Connector: RJ45. Protocols: ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP TCP, UDP, and Telnet, TFTP, RFC2217

Indicators (LED) Power, Link, Activity, RX Activity, TX Activity

Processor CPU: Lantronix DSTNI-EX 48 MHz clock. Memory: 256 KB SRAM, 2 MB Flash


Power Input supply: 9-30 VDC (PoE only available on UD11000P0-01 version)Power Consumption: 1.8 Watts maximum

Environmental Limits

Operating temperature: 0° to 60°C. Storage temperature: -40° to 85°COperating Humidity: 10% to 90%. Storage Humidity: 10% to 90%

Form Factor Housing: Metal enclosure with integrated wall mounts (optional 35 mm DIN-rail mount available)Dimensions: 9.5 x 7.2 x 2.3 cm. Weight: 0.4 kg (0.9 lb). IP Rating: 30

Included Software Windows 98/ME/NT/2000/XP/Vista (32-bit versions) DeviceInstaller configuration software, Com Port Redirector software and related utilities. Configuration Options: Web browser, Telnet client, Serial Terminal

Emissions FCC Part 15 Subpart B Class A.ICES-003 Issue 4 February 2004 Class AAS/NZS CISPR 22: 2006 Class AEN55022: 1998 + A1: 2000 + A2: 2003 Class AUL 864: indoor dry environments (UDS1100 only)VCCI V-3/2006.4 Class AEN61000-3-2: 2000 Class AEN61000-3-3: 1995 + A1: 2001

Immunity EN55024: 1998 +A1: 2001 +A2: 2003IEC_61000-4-2: 1995 8KV Air, 4KV ContactIEC_61000-4-3: 1995 3.0V/m, 1KHz AM Sine Wave at 80%IEC_61000-4-4: 1995 1.0KV Power Lines, 0.5KV I/O LinesIEC_61000-4-5: 1995 1.0KV Common, 1.0 KV DifferentialIEC_61000-4-6: 1996 3.0 Vrms, 80% AM Modulated (1KHz)IEC_61000-4-8: 1993 50Hz 1.0 Arms/mIEC_61000-4-11: 1994 (>95%,0.5), (30%,25), (>95%,250)

Isolation Power Input: Up to non-repeated 600W 10/100 usec pulse protection against transient over voltages. Serial Port(s): 15 KV ESD protection. Ethernet Port: 1500 VAC isolation with shield con-nected to chassis ground

Agency Approvals FCC, C/UL, CSA, VCCI, CE, TUV, CTick


Partnr.

UD1100001-01

UD1100002-01

UD11000P0-01

UD110000B-01

UD2100001-01

UD2100002-01

500-163-R500-164-R500-171-RACDIN1001-01ACDIN2001-01

UDS1100 one-port device server- US domestic 110 VAC power supply- Six-foot DB9F-to-DB25M serial cable (P/N 500-163-R)- CD Includes: User Guide and Software utilities (DeviceInstaller and Com Port Redirector)- Quick Start Guide

UDS1100 one-port device server- 100-240 VAC International power supply with regional adapters- Six-foot DB9F-to-DB25M serial cable (P/N 500-163-R)- CD Includes: User Guide and Software utilities (DeviceInstaller and Com Port Redirector)- Quick Start Guide

UDS1100 one-port device server with PoE- Six-foot DB9F-to-DB25M serial cable (P/N 500-163-R)- CD Includes: User Guide and Software utilities (DeviceInstaller and Com Port Redirector)- Quick Start Guide

UDS1100 one-port device server - (Board only – no enclosure)

UDS2100 two-port device server- US domestic 110 VAC power supply- DB9F-to-DB9F Null Modem cable (P/N 500-164-R)- CD Includes: User Guide and Software utilities (DeviceInstaller and Com Port Redirector)- Quick Start Guide

UDS2100 two-port device server- 100-240 VAC International power supply with regional adapters- DB9F-to-DB9F Null Modem cable (P/N 500-164-R)- CD Includes: User Guide and Software utilities (DeviceInstaller and Com Port Redirector)- Quick Start Guide

DB9F-to-DB25M serial cableDB9F-to-DB9F Null modem cableDB25M-to-RS485 and power input terminal adapterDIN-rail mount UDS1100DIN-rail mount UDS2100




SDS1101 Single-Port Secure Device Server


The Most Secure Way to Connect, Monitor, Manage and

Control Devices Over a Network or the Internet

The SecureBox® SDS1101 offers the most secure way to add formerly isolated electronic equipment to the Ethernet network. With this capability, virtually any device with a serial port can be remotely accessed and controlled securely over the network or the Internet. This adds an unprecedented level of flexibility and efficiency to your business, and breathes new life into your ex-isting equipment.

With the proliferation of information in today’s electronic world, businesses are more concerned than ever about protecting data from unwanted intrusion as it is transferred over a network or the Internet. The SDS1101 features the most robust security available on the market with a National Institute of Standards and Technology (NIST) certified implementation of 128-256 bit AES (Advanced Encryption Standards; Rijndael) as specified by FIPS-197 (Federal Information Processing Standards).

Extending Serial Communication Across the GlobeSecureBox is ideal for commercial applications where secure data communications are essential, medical facilities, govern-ment agencies and financial institutions.Using a method called serial tunneling, SecureBox encrypts and encapsulates serial data into packets and transports it over Eth-ernet. Using two device servers connected by a network, se-cure virtual serial connections can be extended across a facility or around the world. SecureBox SDS1101 can also work with Lantronix’s Secure Com Port Redirector™ (SCPR) software to ex-tend the functionality of COM port-based Windows® applica-tions across Ethernet. SCPR creates encrypted virtual COM port connections to transport data to a remote SecureBox over the network or the Internet. This provides secure access and control of COM port-based applications from anywhere, at any time.

Easy to Setup and UseThe Lantronix approach to secure communications is transpar-ent to your attached devices and software. There is no need to change the way you work or develop special software to encrypt/decrypt information over the network. The Windows-based configuration software, user-friendly web interface and on-line help simplify and streamline the set-up process. Secure-Box can also be set up locally through its serial port, or remotely over a network using Telnet or a web browser. For added secu-rity, the web interface can be disabled.Built to expand as your needs grow, SecureBox’s Flash memory provides maintenance-free, non-volatile web page storage and facilitates easy future system upgrades.

Secure Modem ReplacementSecureBox can be used as a faster, less expensive and more reliable alternative to dial-up modems. In modem emula-tion mode, the unit accepts modem AT commands on the serial port and establishes a secure network connection to the end device, eliminating the need for dedicated modems and phone lines.RoHS-compliant, the SDS1101 meets Directive 2002/95/EC on the restriction of the use of certain hazardous substanc-es in electrical and electronic equipment.

Features

Securely network-enable serial devices with 128-256 bit •AES-certified encryption

Transparent communications - no need to develop special •software

RS-232 DCE serial port pinned the same as modem for •easy connection

10/100 Ethernet Interface•

Supported by Lantronix’s Secure Com Port Redirector™ •software




Contactdetails:




Our Websites




• mh-labeling.com







Specifications

Serial Interface Interface: Software-selectable RS232, RS422 or RS485 (2 and 4 wire support)Connectors: 1 DB25F DCE serial portData Rates: Software-selectable baud rate from 300 to 230 KBaudCharacters: 7 or 8 data bits. Parity: odd, even, none. Stop Bits: 1 or 2Control Signals: CTS/RTS (Hardware). Flow Control: XON/XOFF (Software)

Network Interface Interface: 10Base-T/100Base-TX Ethernet port. Software selectable Ethernet speed 10/100/Auto. Software selectable Half/Full/Auto duplex. Connector: RJ45Standards: ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP TCP, UDP, and Telnet,TFTP

Indicators (LED) Power, 10/100 Link/Activity (green), 100/100. Link/Activity(green), Diagnostics (red), Status (green)



Power 9-30 VDC or 9-24 VAC on barrel connector (1.5 Watts maximum consumption)9-30 VDC on DB25F serial interface

Environmental Operating: 5° to 50°C. Storage: -40° to 66°C

Packaging Material: Metal enclosure with integrated wall mounts; optional 35 mm DIN-rail mount availa-ble. Dimensions (LxWxH): 9.0 x 6.4 x 2.3 cm. Weight: 0.20 kg. IP Rating: 30

Included Software Windows® 98/ME/NT/2000/XP-based DeviceInstaller configuration software, Com Port Redirector™software and related utilities


Immunity EN55024: 1998 +A1: 2001 +A2: 2003IEC_61000-4-2: 1995 ESD 8KV Air Discharge (Direct), 4KV Contact Discharge (Direct/Indirect)IEC_61000-4-3: 1995 Radiated Immunity 3.0V/m, 1KHz AM Sine Wave at 80%IEC_61000-4-4: 1995 EFT/Burst 1.0KV Power Lines, 0.5KV I/O LinesIEC_61000-4-5: 1995 Surge Immunity 1.0KV Common Mode, 1.0 KV Differential ModeIEC_61000-4-6: 1996 Conducted Immunity 3.0 Vrms, 80% AM Modulated (1KHz)IEC_61000-4-8: 1993 Magnetic Field Immunity 50Hz 1.0 Arms/mIEC_61000-4-11: 1994 Voltage Dips and Interrupts (>95%,0.5 periods), (30%,25 periods), (>95%,250 periods)


Agency Approvals UL, CSA, FCC, CE,TUV, CTick, VCCI


Partnr.

SD1101002-11 SDS1101 single Port Secure device server with AES Encryption, universal power supply

Accessories:500-163ACDIN1001-01500-171-R

External Antenna for PremierWave XN 2.15 dBi, Reverse Polarity, SMA ConnectorDB25M to DB9F serial cable (included)DB25M to RS485 and 9-30 VDC power input screw terminal adapter





SDS2101 SecureBox™ Secure Device Server


The Most Secure Way to Connect, Monitor, Manage and

Control Devices Over a Network or the Internet

The SecureBox family of device servers offers the most secure way to add formerly isolated electronic equipment to the Ether-net network. With this capability, virtually any device with a se-rial port can be remotely accessed and controlled securely over the network or the Internet. This adds an unprecedented level of flexibility and efficiency to your business, and breathes new life into your existing equipment.

With the proliferation of information in today’s electronic world, businesses are more concerned than ever about protecting data from unwanted intrusion as it is transferred over a network or the Internet.SecureBox device servers feature the most robust security avail-able on the market with a National Institute of Standards and Technology (NIST) certified implementation of 128-256 bit AES (Advanced Encryption Standards; Rijndael) as specified by FIPS-197 (Federal Information Processing Standards).

Easy to install and implement, SecureBox device servers are ide-al for commercial applications where secure data communica-tions are essential, medical facilities, government agencies and financial institutions. Using a method called serial tunneling, Se-cureBox encrypts and encapsulates serial data into packets and transports it over Ethernet. Using two device servers connected by a network, secure virtual serial connections can be extended across a facility or around the world.

The Lantronix approach to secure communications is transpar-ent to your attached devices and software.There is no need to change the way you work or develop special software to encrypt/decrypt information over the network. The Windows-based configuration software, user-friendly web in-terface and on-line help simplify and streamline the set-up proc-ess. SecureBox can also be set up locally through its serial port, or remotely over a network using Telnet or a web browser.For added security, the web interface can be disabled.

SecureBox device servers can be used as a faster, less expen-sive and more reliable alternative to dial-up modems. In modem emulation mode, the unit accepts modem AT commands on the serial port and establishes a secure network connection to the end device, eliminating the need for dedicated modems and phone lines.Available in single port (SDS1101) or dual port (SDS2101) con-figurations, SecureBox can also work with Lantronix’s Secure

Com Port Redirector (SCPR) software to extend the func-tionality of COM port-based Windows® applications across Ethernet. SCPR creates encrypted virtual COM port con-nections to transport data to a remote SecureBox over the network or the Internet. This provides secure access and control of COM port-based applications from anywhere, at any time.

Built to expand as your needs grow, SecureBox’s Flash mem-ory provides maintenance-free, non-volatile web page stor-age and facilitates easy future system upgrades. If you’re looking for the most cost-effective and scalable solution for securely network-enabling your equipment, look no further than SecureBox.

Features

Securely network-enable serial devices with 128-256 bit •AES-certified encryption

Transparent communications - no need to develop special •software

Two RS-232 DTE serial ports pinned the same as PC for •easy connection

10/100 Ethernet Interface•




Contactdetails:




Our Websites




• mh-labeling.com







Specifications

Serial Interface Interface: Software-selectable RS232, RS422 or RS485 (2 and 4 wire support)Connectors: 2 DB9M DTE serial portsData Rates: Software-selectable baud rate from 300 to 921 KBaudCharacters: 7 or 8 data bits. Parity: odd, even, none. Stop Bits: 1 or 2Control Signals: CTS/RTS (Hardware). Flow Control: XON/XOFF (Software)Data Encryption: 128-256 Bit AES encryption, NIST AES Cert #120

Network Interface Interface: 10Base-T/100Base-TX Ethernet port. Software selectable Ethernet speed 10/100/AutoSoftware selectable Half/Full/Auto duplex. Connector: RJ45Standards: ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP and RFC2217

Indicators (LED) Power (blue). RXI Serial (Activity) (green). TXI Serial (Activity) (yellow). RX2 Serial (Activity) (green)TX2 Serial (Activity) (yellow). RJ45 LEDs Link (100=green,10=yellow)Act (Full=green, Half duplex=green)



Power 9-30 VDC on barrel connector (1.8 Watts maximum consumption)

Environmental Operating: 0° to 60°C. Storage: -40° to 85°C

Packaging Material: Metal enclosure with integrated wall mounts; optional 35 mm DIN-rail mount availa-ble. Dimensions (LxWxH): 9.5 x 7.2 x 2.3 cm. Weight: 0.4 kg. IP Rating: 30

Included Software Windows® 98/ME/NT/2000/XP-based DeviceInstaller configuration software, Com Port Redirec-tor™ software and related utilities


Immunity EN55024: 1998 +A1: 2001 +A2: 2003IEC_61000-4-2: 1995 ESD 8KV Air Discharge (Direct), 4KV Contact Discharge (Direct/Indirect)IEC_61000-4-3: 1995 Radiated Immunity 3.0V/m, 1KHz AM Sine Wave at 80%IEC_61000-4-4: 1995 EFT/Burst 1.0KV Power Lines, 0.5KV I/O LinesIEC_61000-4-5: 1995 Surge Immunity 1.0KV Common Mode, 1.0 KV Differential ModeIEC_61000-4-6: 1996 Conducted Immunity 3.0 Vrms, 80% AM Modulated (1KHz)IEC_61000-4-8: 1993 Magnetic Field Immunity 50Hz 1.0 Arms/mIEC_61000-4-11: 1994 Voltage Dips and Interrupts (>95%,0.5 periods), (30%,25 periods), (>95%,250 periods)


Agency Approvals FCC, C/UL, CSA, VCCI, CE,TUV, CTick


Partnr.

SD2101002-11 SDS2101 two-port 10/100 secure device server RoHS compliant; universal power supply with regional adapters

Accessories:500-164-R500-163-RACDIN2001-01

DB9F to DB9F Null modem cable (included)DB25M to DB9F serial cableOptional DIN-rail mount





IntelliBox 2100 Device Server


down other networked devices. Evolution OS uses familiar data-center standards such as a Cisco-like command line interface (CLI) very similar to that used by routers and hubs, simplifying configuration and enterprise network integra-tion. It also incorporates XML – a standard tool for web services, data transfer and rich content management that encapsulates data into a text-based format.

Powerful and RuggedIntelliBox is equipped with isolated serial, I/O and Ethernet ports and screw terminal connectors for serial, I/O, relay and power. It supports Modbus TCP, Modbus ASCII and Modbus RTU and is FM-approved for hazardous locations Class 1, Div. 2. IntelliBox also features 15KV serial port ESD protec-tion which protects the IntelliBox from electrical overstress; ESD-protected I/O channels (independent and optically iso-lated); wide -40°–75°C operational temperature range; and flexible power with 9-30 VDC and 9-24 VAC input range.IntelliBox can act as a Modbus TCP slave, enabling Mod-bus TCP masters to monitor the status of digital inputs and set the digital outputs and relays. It can also be used as a “Modbus bridge” (Modbus TCP to Modbus RTU/ASCII protocol converter) enabling users to connect RS232/RS485 Modbus RTU/ASCII devices to their Ethernet network to be controlled by Modbus TCP masters (PLCs, OPC servers, SCADA software, etc).

Fully Automate Your Remote Equipment with Real-time

Event Management and Reporting

IntelliBox®-I/O 2100 is a breakthrough in truly automated con-trol of remote equipment. Powered by Lantronix EventTrak™ technology, this highly-advanced, programmable device server connects your equipment to an IP network and monitors it to watch for events at specified intervals. When an event occurs, IntelliBox automatically sends pre-determined, user-defined command(s) to the equipment causing it to take appropriate and/or corrective actions – without any user intervention. Intel-liBox can send email notification that the event was detected and handled accordingly.

True Autonomous Control with EventTrakIntelliBox proactively monitors and controls remote digital I/O, dry contact (relay) and RS232/422/485-based equipment. With built-in EventTrak technology, IntelliBox can be set to query an attached device at timed intervals then, depending on the re-sults, take pre-specified action(s). In addition to monitoring a serial line the IntelliBox can also monitor digital I/O. Fluid-level monitoring is a simple example – if IntelliBox notices a digital float sensor drop to a ‘low level,’ it can trigger a relay to start the fluid pump. When the level is restored the relay is triggered to stop the pump. IntelliBox sends an email to the user notifying them of the situation and the actions taken. Instead of react-ing to an event or problem, users are proactively notified that an event occurred and the appropriate response automatically took place. This also enables users to control networked equip-ment directly through the serial or I/O port rather than depend-ing on a PLC or SCADA server. In some instances, several events should occur before action is taken. EventTrak allows “Chain Definitions” (series of events/ actions) to be defined. They can be saved, stored and transferred from one IntelliBox to another, providing a great deal of flexibility for large-scale deployment. IntelliBox is ideal for alarms, fluid pumps, motor drives, lights, fans, phone systems, access/control/alarm panels, HVAC equip-ment, PLC’s, projectors, security cameras, proximity readers, card readers, etc.

Automated ReportingIntelliBox consolidates the task of monitoring/reporting on mul-tiple pieces of equipment. Rather than query and review the output of each device separately, users can configure the Intel-liBox to query attached equipment at configurable intervals and gather the returned data. Incoming data can be sent via email or RSS feed, allowing hundreds of devices to be monitored from one RSS-enabled web page. Incoming data can be scanned for specific information. When it is detected, IntelliBox can send an email flagged as “Important” along with the data and take corrective action if needed.

Enterprise-grade Security and Data Center StandardsEquipped with the Lantronix Evolution OS™networking operat-ing system, IntelliBox delivers enterprise-grade level networking security with built-in SSH/SSL support. The hardened OS and mature protocol stack are resilient to denial of service (DoS) and port mapping attacks and prevent it from being used to bring

Main Features

Reduce service calls or trips to repair or check on equip-•ment. IntelliBox does it for you!

Save time, reduce costs and increase efficiency•

Network-enables equipment for Internet access•

Proactively monitors serial and Ethernet devices•

Takes automatic action and/or troubleshooting•

Automatically reporting with email or RSS•




Contactdetails:




Our Websites




• mh-labeling.com







Specifications

Serial Interface 2Serial ports: 1RS232,1 RS422/485 (4-wire/2-wire) with terminal block connectionBaud rate selectable from 300 to 230 KbpsCustomizable baud rate support for non-standard serial speedsLED indicators for TXD and RXD activities

Serial Line Formats Characters: 7or 8 data bits. Stop bits: 1or 2. Parity: odd, even, none

Flow Control Hardware: RTS/CTS. Software: XON/XOFF

Modem Control CTS, RTS, DTR, DCD on Serial 1

Digital I/O 2 Independently configurable digital l/O’s, configured via GUI set-up MenuOpto-isolated to eliminate grounding issuesLogically compatible with 3.3V level and also higher voltage levelsTransient voltage and polarity reversal protection built in

Relay Contacts are capable of handling up to 8A resistive loadContacts are mechanically isolated to eliminate grounding issuesContacts are non-latching with Normally Open (NO) or Normally Closed (NC) for simple application such as power failure indication

Network Interface 1RJ45 Ethernet port - 10Base-T/100Base-TXFull or half duplex - Auto-negotiating or hard coded

LED Indicators 10Base-Tand 100Base-TX link - Ethernet ActivitySerial Transmit Data - Serial Receive Data - Power / Status

Management Internal web server - SNMP v2C (MIB-II, RS232MIB) - Serial loginTelnet/SSH login - XML - Device lnstaller software

Power Removable screw terminal block connector 9-30 VDC or 9-24 VAC with chassis ground 2.3W

Environmental Temperature: -40°C to 75°C OperatingTemperature: -40°C to 85°C StorageHumidity: 10% to 90% relative humidity, non condensing

Agency Approvals UL, CSA, FCC, CE, TUV, CTick, VCCI

Protocols Supported ARp, UDP/lp, TCP/lp, Telnet, ICMp, SNMp, DHCp, BOOTp, TFTp, Auto Ip, SMTp, FTp, DNS, Traceroute, HTTP

Industrial Application Protocols

Modbus TCp, Modbus ASCII/RTU

CPU Lantronix DSTNI-EX 120 MHz clock, 2S6 KB SRAM, 16 KB Boot ROM Internal CPU Memory

Memory • EEPROM 4MB Flash - 2MB SRAM • 64 Kbits

Reset Recessed push button

Packaging Case: metal enclosure with wall mountsIP30 enclosure ratingDimensions: (L xWx H): 115 x 109 x23 mm, terminal blocks includedWeight: 0.3 kg

Isolation 1.5 KVAC I 2.1 KVDC galvanic isolation between power input port, Ethernet port (except chassis ground), serial ports1.5 KVAC I 2.1 KVDC opto-isolation between digital 1/0 ports and all other ports1.5 KVAC I 2.1 KVDC mechanical isolation between Relay contacts and all other ports8KV direct contact, 15 KV air discharge, ESD protection on all serial ports (IEC 1000-4-2, IEC 61000-4-2)40 A(5150 ns) EFT protection (IEC 61000-4-4), 12 A(8/20 us) lightning protection (IEC 61000-4-5) on Ethernet portTransient voltage protection and ESD at power input with max non-repetitive surge current 800 A(8/20 us) (IEC 61000-4-2)Transient voltage protection and ESD with max non-repetitive surge power 600W peak (10/1000 us) at digital 1/0 ports

Partnr.

IBIO21002-01 IntelliBox-I/O 2100, 2 port lA device and I/O server with EventTrak, worldwide power sup-ply with regional adapters.


Sample Application

device servers serial to lan - mh-monitoringcontrol.com · ally any industrial device with serial...

Documents