development of algorithms for urban bmps in swat: sand filters · develop algorithms for urban...
TRANSCRIPT
![Page 1: Development of Algorithms for Urban BMPs in SWAT: Sand Filters · Develop algorithms for urban BMPs/LIDs Improve SWAT urban processes Sedimentation ponds, filtration ponds, retention-irrigation](https://reader030.vdocuments.us/reader030/viewer/2022011908/5f5685b3ceb6645009245ea8/html5/thumbnails/1.jpg)
Improving Life through Science and Technology
Development of Algorithms for Urban BMPs in SWAT: Sand Filters J. Jeong, N. Kannan, R. Glick, L. Gosselink, J. Arnold, R. Srinivasan
2011 International SWAT Conference, Toledo, Spain, June 15-17, 2011
![Page 2: Development of Algorithms for Urban BMPs in SWAT: Sand Filters · Develop algorithms for urban BMPs/LIDs Improve SWAT urban processes Sedimentation ponds, filtration ponds, retention-irrigation](https://reader030.vdocuments.us/reader030/viewer/2022011908/5f5685b3ceb6645009245ea8/html5/thumbnails/2.jpg)
Contents
Sub-daily SWAT Overview
Algorithm Development
SWAT Integration
Case Study
Summary
![Page 3: Development of Algorithms for Urban BMPs in SWAT: Sand Filters · Develop algorithms for urban BMPs/LIDs Improve SWAT urban processes Sedimentation ponds, filtration ponds, retention-irrigation](https://reader030.vdocuments.us/reader030/viewer/2022011908/5f5685b3ceb6645009245ea8/html5/thumbnails/3.jpg)
Project Goals
Develop reliable sub-daily modules for continuous simulation Surface runoff, stream flow
Erosion and sediment transport
Develop algorithms for urban BMPs/LIDs Improve SWAT urban processes
Sedimentation ponds, filtration ponds, retention-irrigation
Detention ponds, wet ponds
Cisterns, rain gardens, green roofs (through 2012)
Simulate flow and sediment through the BMPs
![Page 4: Development of Algorithms for Urban BMPs in SWAT: Sand Filters · Develop algorithms for urban BMPs/LIDs Improve SWAT urban processes Sedimentation ponds, filtration ponds, retention-irrigation](https://reader030.vdocuments.us/reader030/viewer/2022011908/5f5685b3ceb6645009245ea8/html5/thumbnails/4.jpg)
SWAT Urban Modelling
Erosion/Sediment
Disaggregate
(1/n)
![Page 5: Development of Algorithms for Urban BMPs in SWAT: Sand Filters · Develop algorithms for urban BMPs/LIDs Improve SWAT urban processes Sedimentation ponds, filtration ponds, retention-irrigation](https://reader030.vdocuments.us/reader030/viewer/2022011908/5f5685b3ceb6645009245ea8/html5/thumbnails/5.jpg)
Sand Filters
Purpose: remove pollutants from urban stormwater through settling and filtration
Use the full or partial type system based on location, stormwater volume, and land availability (City of Austin, Texas, USA)
Scope of the model usage:
Performance evaluation
Sandfilter design
![Page 6: Development of Algorithms for Urban BMPs in SWAT: Sand Filters · Develop algorithms for urban BMPs/LIDs Improve SWAT urban processes Sedimentation ponds, filtration ponds, retention-irrigation](https://reader030.vdocuments.us/reader030/viewer/2022011908/5f5685b3ceb6645009245ea8/html5/thumbnails/6.jpg)
Sand Filters
Settling
Chamber Filtration
Chamber
A A’
(A-A’)
![Page 7: Development of Algorithms for Urban BMPs in SWAT: Sand Filters · Develop algorithms for urban BMPs/LIDs Improve SWAT urban processes Sedimentation ponds, filtration ponds, retention-irrigation](https://reader030.vdocuments.us/reader030/viewer/2022011908/5f5685b3ceb6645009245ea8/html5/thumbnails/7.jpg)
Filtration Processes
Water Balance
A modified Green & Ampt equation calculates
unsaturated flow through sand filter Darcy’s law for saturated flow Orifice flow from under-drain pipe assuming
hydrostatic pressure Weir overflow: water and pollutants bypass the BMP
bypassthruinw QQERQt
V
![Page 8: Development of Algorithms for Urban BMPs in SWAT: Sand Filters · Develop algorithms for urban BMPs/LIDs Improve SWAT urban processes Sedimentation ponds, filtration ponds, retention-irrigation](https://reader030.vdocuments.us/reader030/viewer/2022011908/5f5685b3ceb6645009245ea8/html5/thumbnails/8.jpg)
Filtration Processes
Modified Green & Amt equation
F= Cumulative infiltration, mm
K= Hydraulic conductivity, mm/hr
h= Ponding depth above filter surface, mm
Y= Suction head at the wetting front, mm
Dq= Change in water content of sand filter
DY
F
h1K
dt
dF q
![Page 9: Development of Algorithms for Urban BMPs in SWAT: Sand Filters · Develop algorithms for urban BMPs/LIDs Improve SWAT urban processes Sedimentation ponds, filtration ponds, retention-irrigation](https://reader030.vdocuments.us/reader030/viewer/2022011908/5f5685b3ceb6645009245ea8/html5/thumbnails/9.jpg)
Filtration Processes
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.2
0 5 10 15 20 25
Infi
ltra
tio
n r
ate
/ K
sat
Time, hours
No ponding R/Ksat = 1.5R/Ksat = 0.5 R/Ksat = 2.0R/Ksat = 1.0
Consideration of surface ponding vs. no ponding
![Page 10: Development of Algorithms for Urban BMPs in SWAT: Sand Filters · Develop algorithms for urban BMPs/LIDs Improve SWAT urban processes Sedimentation ponds, filtration ponds, retention-irrigation](https://reader030.vdocuments.us/reader030/viewer/2022011908/5f5685b3ceb6645009245ea8/html5/thumbnails/10.jpg)
Filtration Processes
Darcy’s law
F= Cumulative infiltration, mm
K= Hydraulic conductivity, mm/hr
h= Ponding depth above filter surface, mm
L= Total depth of filter media, mm
L
LhK
dt
dF
![Page 11: Development of Algorithms for Urban BMPs in SWAT: Sand Filters · Develop algorithms for urban BMPs/LIDs Improve SWAT urban processes Sedimentation ponds, filtration ponds, retention-irrigation](https://reader030.vdocuments.us/reader030/viewer/2022011908/5f5685b3ceb6645009245ea8/html5/thumbnails/11.jpg)
Filtration Processes
Consideration of surface ponding vs. no ponding
(Constant inflow: K=40mm/hr, R=80mm/hr)
![Page 12: Development of Algorithms for Urban BMPs in SWAT: Sand Filters · Develop algorithms for urban BMPs/LIDs Improve SWAT urban processes Sedimentation ponds, filtration ponds, retention-irrigation](https://reader030.vdocuments.us/reader030/viewer/2022011908/5f5685b3ceb6645009245ea8/html5/thumbnails/12.jpg)
Particles Removal
Single Isolated Collector model by Yao et al. (1971)
E= Removal efficiency
e= Filter porosity
a= Collision frequency
h= Attachment efficiency
dc= Filter media diameter
L = Filter thickness (Particle capture mechanism)
L
dE
c
r
ahe1
2
3exp1
![Page 13: Development of Algorithms for Urban BMPs in SWAT: Sand Filters · Develop algorithms for urban BMPs/LIDs Improve SWAT urban processes Sedimentation ponds, filtration ponds, retention-irrigation](https://reader030.vdocuments.us/reader030/viewer/2022011908/5f5685b3ceb6645009245ea8/html5/thumbnails/13.jpg)
Clogging
Depth filtration theory derived from Darcy’s law (Mays and Hunt, 2005; Li and Davis, 2008)
K= Hydraulic conductivity of filter media
K0= Initial hydraulic conductivity
g= Empirical constant
sn= The volume of deposited particles per unit filter volume
2
v0 1
1
K
K
gs
![Page 14: Development of Algorithms for Urban BMPs in SWAT: Sand Filters · Develop algorithms for urban BMPs/LIDs Improve SWAT urban processes Sedimentation ponds, filtration ponds, retention-irrigation](https://reader030.vdocuments.us/reader030/viewer/2022011908/5f5685b3ceb6645009245ea8/html5/thumbnails/14.jpg)
SWAT Sandfilter Algorithm
N
Y
Orifice controls through-flow
Inflow
Excess water?
Green & Ampt Darcy equation
Update ponding volume
Update soil water
Filter media saturated?
Infiltration ≥ Vpond
Infiltration is limited by ponding volume
Through-flow
(Orifice flow)
Update other flow components
Junction
Outflow
Overflow (Q, TSS)
Y
N
Y N
Through-flow > Orifice flow? Y
N
TSS removal
![Page 15: Development of Algorithms for Urban BMPs in SWAT: Sand Filters · Develop algorithms for urban BMPs/LIDs Improve SWAT urban processes Sedimentation ponds, filtration ponds, retention-irrigation](https://reader030.vdocuments.us/reader030/viewer/2022011908/5f5685b3ceb6645009245ea8/html5/thumbnails/15.jpg)
Case Study (Jollyville Sandfilter)
A partial system in highly urbanized area in Austin, TX USA
Drainage area is 2.8ha
100% urban, 90% impervious cover Roads: 84%
Commercial: 11%
Offices: 5%
High res. DEM (1ft x 1ft)
Sandfilter is located at the watershed outlet
¯
Legend
Outlet
<all other values>
Type
! Linking stream added Outlet
Watershed
SwatLandUseClass(LandUse8)
LUArea8.LUSwat
UCOM
UINS
UTRN
0 480 960240 Feet
![
Sand filter
![Page 16: Development of Algorithms for Urban BMPs in SWAT: Sand Filters · Develop algorithms for urban BMPs/LIDs Improve SWAT urban processes Sedimentation ponds, filtration ponds, retention-irrigation](https://reader030.vdocuments.us/reader030/viewer/2022011908/5f5685b3ceb6645009245ea8/html5/thumbnails/16.jpg)
Jollyville Sandfilter
Discharge
weir
Forebay/Filter
area divider
Inlet weir
![Page 17: Development of Algorithms for Urban BMPs in SWAT: Sand Filters · Develop algorithms for urban BMPs/LIDs Improve SWAT urban processes Sedimentation ponds, filtration ponds, retention-irrigation](https://reader030.vdocuments.us/reader030/viewer/2022011908/5f5685b3ceb6645009245ea8/html5/thumbnails/17.jpg)
Calibration
Flow/TSS calibrated/validated at the outlet of the filter
Field data 1 minute flow monitored using an auto-logger at the inlet/outlet
TSS data collected several times per storm event using an auto-sampler
Calibration Period: 4/25/1997-4/26/1997
Total rainfall: 81mm
Total inflow: 2,266m3
Peak inflow: 0.26m3/s
Validation Period: 5/09/1997
Total rainfall: 41mm
Total inflow: 1,128m3
Peak inflow: 0.62m3/s
![Page 18: Development of Algorithms for Urban BMPs in SWAT: Sand Filters · Develop algorithms for urban BMPs/LIDs Improve SWAT urban processes Sedimentation ponds, filtration ponds, retention-irrigation](https://reader030.vdocuments.us/reader030/viewer/2022011908/5f5685b3ceb6645009245ea8/html5/thumbnails/18.jpg)
Calibration
0
10
20
30
40
50
60
70
0
5
10
15
20
0:00 6:00 12:00 18:00 0:00 6:00 12:00 18:00 0:00 6:00 12:00
Qin
, mm
Qo
ut,
mm
hours
Measured Qout
Estimated Qout
Qin
0
0.5
1
1.5
0:00 6:00 12:00 18:00 0:00 6:00 12:00 18:00 0:00
TSS,
mg/
l
hours
Cout,pred
Cout,obs
R2=0.92, NSE=0.90
R2=0.21, NSE=0.03
![Page 19: Development of Algorithms for Urban BMPs in SWAT: Sand Filters · Develop algorithms for urban BMPs/LIDs Improve SWAT urban processes Sedimentation ponds, filtration ponds, retention-irrigation](https://reader030.vdocuments.us/reader030/viewer/2022011908/5f5685b3ceb6645009245ea8/html5/thumbnails/19.jpg)
0
40
80
120
160
0
2
4
6
8
10
0 5 10 15 20
Qin
, mm
Qo
ut,
mm
hours
Measured Qout
Estimated Qout
Qin
0
1
2
3
4
0 5 10 15 20
TSS
con
c, m
g/l
hours
Cout,predCout,obs
Validation
NSE=0.93, R2=0.94
NSE=-49, R2=0.00
![Page 20: Development of Algorithms for Urban BMPs in SWAT: Sand Filters · Develop algorithms for urban BMPs/LIDs Improve SWAT urban processes Sedimentation ponds, filtration ponds, retention-irrigation](https://reader030.vdocuments.us/reader030/viewer/2022011908/5f5685b3ceb6645009245ea8/html5/thumbnails/20.jpg)
Filter performance (Field data)
Method: Use the event mean concentration (EMC) to calculate removal efficiency
Calibration period: TSSin= 116.5 mg/l, TSSout=0.37 mg/l
Removal efficiency=99.7%
Validation period: TSSin= 153.3 mg/l, TSSout=1.07 mg/l
Removal efficiency=99.3%
1001
TSSInlet
TSSOutletEfficiencymovalRe
![Page 21: Development of Algorithms for Urban BMPs in SWAT: Sand Filters · Develop algorithms for urban BMPs/LIDs Improve SWAT urban processes Sedimentation ponds, filtration ponds, retention-irrigation](https://reader030.vdocuments.us/reader030/viewer/2022011908/5f5685b3ceb6645009245ea8/html5/thumbnails/21.jpg)
0
500
1000
1500
2000
2500
3000
Inflow Outflow
Wat
er
volu
me
, cu
bic
me
ters
Inflow
Residual water
Bypass flow
Through-flow
Filter performance (Actual?)
62%
38%
Water Balance – calibration period
What about
it?
![Page 22: Development of Algorithms for Urban BMPs in SWAT: Sand Filters · Develop algorithms for urban BMPs/LIDs Improve SWAT urban processes Sedimentation ponds, filtration ponds, retention-irrigation](https://reader030.vdocuments.us/reader030/viewer/2022011908/5f5685b3ceb6645009245ea8/html5/thumbnails/22.jpg)
Filter performance
Method: Include through-flow and bypass-flow to calculate the event mean concentration (EMC)
Calibration period
TSSin= 247.5kg, TSSout=0.33kg, TSSbypass=137.1kg, TSSdeposit=110.1kg
Removal efficiency=45%
TSS deposit (assuming TSS density=1.6g/cm3, porosity=0.4): 0.4mm
![Page 23: Development of Algorithms for Urban BMPs in SWAT: Sand Filters · Develop algorithms for urban BMPs/LIDs Improve SWAT urban processes Sedimentation ponds, filtration ponds, retention-irrigation](https://reader030.vdocuments.us/reader030/viewer/2022011908/5f5685b3ceb6645009245ea8/html5/thumbnails/23.jpg)
Summary
The new SWAT-Sandfilter algorithm simulates urban stormwater and TSS through sandfilters in urban watersheds
The model can be used flexibly for either performance evaluations or design purposes
A modified Green&Ampt equation was proposed for calculating unsaturated filer flow. Saturated flow is simulated using Darcy’s law
The model successfully reproduced stormwater flows through filter media at the Jollyville site in terms of timing, peak rate, and total flow volume
The physically-based model for TSS removal did not perform very well as indicated in the case study
Sediment removal efficiency was above 99% when estimated with event mean values, but significantly decreased (<50%) when bypass amount was included in the calculation
![Page 24: Development of Algorithms for Urban BMPs in SWAT: Sand Filters · Develop algorithms for urban BMPs/LIDs Improve SWAT urban processes Sedimentation ponds, filtration ponds, retention-irrigation](https://reader030.vdocuments.us/reader030/viewer/2022011908/5f5685b3ceb6645009245ea8/html5/thumbnails/24.jpg)
Future work
The model will be tested for long term periods at different locations, based on the availability of data
TSS algorithm will be improved by adding (1) a regression model and (2) effluent probability method
TSS clogging will be tested with a long-term simulation
![Page 25: Development of Algorithms for Urban BMPs in SWAT: Sand Filters · Develop algorithms for urban BMPs/LIDs Improve SWAT urban processes Sedimentation ponds, filtration ponds, retention-irrigation](https://reader030.vdocuments.us/reader030/viewer/2022011908/5f5685b3ceb6645009245ea8/html5/thumbnails/25.jpg)
Questions?