deswik.dd dragline & dozer
TRANSCRIPT
DESWIK DRAGLINE PLANNING PROCESS
Use solids to calculate horizonvolumes & coal tonnages inseconds not hours.
Automate pit shell projectionswith shells reserving.
Interactive & Bulk SpoilBalance (NOT spreadsheets!)
Automated dragline section designs
Automated drafting andplotting tools (engineers areNOT draftsmen).
01
02
03
04
05
SPEED, ACCURACY, AUDITABILITY
DESWIK.DD SPEED & PRODUCTIVITY INCREASES
Automate non-value adding activities
Update sections with new information in an hour, not a day
Powerful reporting tools to eliminate manual data transfer
OPERATIONS
Common operations supported natively for quick usage.
Profile designs for performing complex operations.
DYNAMIC PREVIEW
Blocks SelectionAutomated dependency generation on mouse movement allowing preview of all blocks needed to be moved in order to move block under mouse pointer.
Cut / Move OperationsAll operations including the profile operations will show preview on mouse movement of how the result will look after selecting a location.
INTELLIGENT AUTOMATION
Reference Points- Generated from existing polylines or as aresult of any operation.
- Distances can be measured with respect toany reference points, start of an operationor in profiles with constraints.
Cut-fill operations with profile design constraints.
INTELLIGENT AUTOMATION
Copy StepsCopy steps from a completed section to other sections.
Re-run Steps- After modifying any intermediate step.- After modifying input data.
DATA INTEGRITY AND AUDITING
Data is stored on the design attributes for manual validation.
Parameters used for every operation are preserved for auditing purpose.
Ability to export pass by pass results & dimensioning straight to excel.
Ability to write attributes back onto solids for direct scheduler integration.
Advanced reporting methods integrated with scope for more methods to be added in future.
Integrated plotting to generate quick selection / final plots.
REPORTING
INTEGRATION WITH DESWIK SUITE
Support for surface stacking or solids as inputs
Support to use spoil design tool outputs from Deswik.AdvOCC
Support to generate reference points directly from projection rules polylines
Reports and outputs written directly back onto solids for scheduling
Direct integration into Deswik.MDM and Deswik.FM for multi user environments
RELENTLESS IMPROVEMENT AND INNOVATION
01Generation of pass-by-pass design solids.
02 Automated dimensioning of sections via reference points.
03 Workflow support for integration into other planning processes.
04 Automated topography merging as design progresses.