designed for extreme indoor and outdoor locations!
TRANSCRIPT
ENCLOSURE RATINGS *Type: 4X - 304 or 316 Stainless *Type: 4 - 304 or 316 Stainless *Type: 3R - 304 or 316 Stainless *Type: 3 - 304 or 316 Stainless *IP66 & IP69 Rated - Certified by UL
ENCLOSURE OPTIONS: *Lighting *Ventilation Air Conditioning Fans Heating *Lasered holes & Cut Outs *Lifting lugs (welded) *Hanging brackets *3A Dairy Finish *Dead Front Door *Interlocked Doors
ENCLOSURE INDUSTRIES: *Industrial *Pharmaceutical *Food & Dairy *Outdoor
Designed for extreme indoor and outdoor locations!
CUSTOM STAINLESS ENCLOSURES, INC -- BUILDING YOUR ENCLOSURES YOUR WAY --
Sales: 651.500.3650 .:. Email: [email protected] .:. Web: 4Xxtreme.com
Outer Seal
Inner Seal
DOUBLE SEAL ENCLOSURES™ U.S. PATENT # 9,745,794
UL LISTED TYPES: 4X, 4, 3R, 3, 1
Outer Seal increases the ability to withstand harsher environments.
Return Flange makes the door more rigid, requiring less quarter turns.
Field replaceable EPDM gasket system, rated continuous use at 200 °F.
Inner Seal is the only seal required for maintaining the Type 4X rating.
Pitched Outer Seal
Bullnose Slope Back
Slope Back
Slope Forward
Bullnose Slope Forward
Note: Flat Top Enclosures Are Available
Custom Stainless Enclosures, Inc. has developed a revolutionary Type: 4X, IP66 and IP69 Double Seal electrical enclosure for all industries. All of our enclosures surpass industry standards with our groundbreaking Double Seal Enclosure™ designed to withstand the harshest environments.
ULTRA CLEAN - FREE DRAINING DESIGN
DOUBLE STUD® MOUNTING SYSTEM U.S. PATENT # 10,077,794
AVAILABLE MOUNTING BRACKETS
“A“ dimension is stocked in 4 sizes 1 “, 2”, 4” and 10”.
Our goal when creating the Double Stud® was to supply our enclosures with an innovative mounting system that eliminates gaskets and reduces overall installation time.
DOUBLE STUD® DOUBLE STUD® Welded in place
Mounting Bracket
Hex Bolt
Flat Washers
Back Panel
Hex Nut
Front of bullnose extends past the front of door 1”.
1”
Underside of bullnose pitched up so liquid doesn’t flow back over the top of the door.
Top of door pitched for free draining. Pitched Outer seal.
Bottom of door pitched for free drainage.
“A”
CUSTOM STAINLESS ENCLOSURES, INC -- BUILDING YOUR ENCLOSURES YOUR WAY --
Sales: 651.500.3650 .:. Email: [email protected] .:. Web: 4Xxtreme.com
Door gasket is pitched a minimum of ¼” per 12” on a 30”
wide door.
Free Draining Slots so water can’t build up between inner and outer seals.
1/4” PLATE
SANITARY
STANDARD
980 SERIES
970 SERIES
910 SERIES Gasketed Washer
Wall
O-Ring
3/8-16 X 1” bolt
Enclosure
“X”
Available bracket sizes: X = 1” Bracket X = 2” Bracket X = 4” Bracket X = 10” Bracket
Reduce your installation costs, by using our mounting systems on your next enclosure.
Need a special bracket for your installation? Give us a call!
4X - 60 30 12 - SS - BNSB - 17 - QT - FL - FM - TW - 3ADOUBLE SEAL
DOOR WIDTH
ENCLOSUREDEPTH
MATERIAL TYPE:SS= 304 STAINLESSSS(316) = 316 STAINLESS
TOP CONFIGURATION:SF = SLOPE FORWARDSB = SLOPE BACKBNSF = BULLNOSE SLOPE FORWARDBNSB = BULLNOSE SLOPE BACKFT = FLAT TOP
° PITCH
LATCH TYPEQT = QUARTER TURN 3PT = 3 POINT LATCH
FLANGED
FLOORMOUNT
TWINDOOR
PART# SYSTEM - SINGLE DOOR ENCLOSURES
NOTE: * ACTUAL DOOR HEIGHT IS 1/2" TALLER THAN PART# SIZE
** BACK PANEL PART # SYSTEM
X60P30-G - (57" x 27") GALVANIZED BACK PANEL
DOOR HEIGHT
DOOR WIDTH
MATERIAL TYPE: G - GALVANIZED - 12 GAUGEAL - ALUMINUM - 1/8"SS - STAINLESS 304 - 12 GAUGEW - POWDER COATED STEEL - 12 GAUGE
* * BACK PANEL PART NUMBER IS BASED UPON DOOR SIZE
GRIND & POLISHINSIDE CORNERS
4X - 72 90 24 - SS - SF - 17 - 3D - QT - FL - FM - TW - CS - 3ADOUBLE SEAL
*DOOR HEIGHT
ENCLOSURE WIDTH
DEPTH
MATERIAL TYPE:SS= 304 STAINLESSSS(316) = 316 STAINLESS
TOP CONFIGURATION:SF = SLOPE FORWARDSB = SLOPE BACKBNSF = BULLNOSE SLOPE FORWARDBNSB = BULLNOSE SLOPE BACKFT = FLAT TOP
° PITCH
LATCH TYPEQT = QUARTER TURN 3PT = 3 POINT LATCH
FLANGED
FLOORMOUNT
TWINDOOR
NOTE: * BACK PANEL PART NUMBER IS BASED UPON ENCLOSURE SIZE
# DOORS2 DOOR3 DOOR4 DOOR
CONSOLE
MULTI DOOR - BACK PANEL PART # SYSTEM
X72P90-G - (68" x 86") GALVANIZED BACK PANEL
*DOORHEIGHT
ENCLOSUREWIDTH
MATERIAL TYPE: G - GALVANIZED - 12 GAUGEAL - ALUMINUM - 1/8"SS - STAINLESS 304 - 12 GAUGEW - POWDER COATED STEEL - 12 GAUGE
PART# SYSTEM - MULTI DOOR ENCLOSURES
GRIND & POLISHINSIDE CORNERS
(SUBTRACT 4" FROM HEIGHT AND WIDTH)
*DOOR HEIGHT
* * BACK PANEL PART NUMBER IS BASED UPON DOOR SIZE & OVERALL ENCLOSUREWIDTH.
(SUBTRACT 3" FROM DOOR HEIGHT AND WIDTH)
CUSTOM STAINLESS ENCLOSURES, INC--BUILDING YOUR ENCLOSURE YOUR WAY--
Sales: 651.500.3650 .:. Email: [email protected] .:. Web: 4Xxtreme.com
4X-323229-SS-BNSB-7-TW-QT Bullnose Slope Back Twin Door Enclosure
4X-408718-SS-SF-10-3PT-FL-3D Slope Forward 3 Door
Mechanical Interlocked Doors Enclosure
4X-181825-SS-BNSF-05-TW-QT Bullnose Slope Forward
Twin Door Enclosure
4X-623224-SS-CO-QT Console 3 Door
4X-723618-SS-BNSB-10-3PT Bullnose Slope Back Enclosure
with Convivence and Key Exchange Unit Enclosures
4X-563612-SS-SF-07-2D-QT Slope Forward 2 Door Enclosure
With Center Barrier
4X-072704-SS-SB-07-QT Slope Back Push Button Enclosure
CUSTOM STAINLESS ENCLOSURES, INC -- BUILDING YOUR ENCLOSURES YOUR WAY --
Sales: 651.500.3650 .:. Email: [email protected] .:. Web: 4Xxtreme.com
4X-HMI-ARM-SB-30-QT HMI Arm Enclosure
4X-723624-SS-BNSB-30-3PT-FM Bullnose Slope Back
Floor Mount Enclosure With External Disconnect Enclosure
4X-341812-SS-BNSB-30-3PT-FL