Design Features :

Single stage, horizontal End-Suction type.

Back pull-out construction allows easy dismantling of bearing frame and impeller assembly.

Pump has a one piece polypropylene smooth volute casing.

Pump casing assembly is hydrostatically tested to a minimum of 1.5 times the

-shut-off pressure.

Self venting.

Shaft sleeves in wide variety of materials (SS316, Alloy-20, Haste Alloy - B & C,

-Titanium) depending on the application.

Shaft Sealing by gland packing or mechanical seal with provision for flushing liquid.

Easy maintenance and replacement of mechanical seal.

Impellers are of Semi-open and closed type.

Impellers are dynamically balanced.

Expert and skilled selection of materials to achieve a high rate of corrosion resistance.

Series ‘kpp’ Pump Technical Data

Model Suction Discharge Impeller Dia

Head (m) m /hr. Head (m)m /hr. Head (m)m /hr.Head (m)m /hr.

kpp25-125 40 25 125 0 5 4 1 6 10 16 4

kpp40-160 50 40 160 0 11 12 5 6 22 48 40

kpp40-200 75 40 200 0 15 20 6 10 30 70 15

kpp50-200 75 50 200 5 16 23 4 20 32 72 8

1500 2900

PUMP SPEED IN RPM

Minimum Maximum Minimum Maximum

P r a k a s h P r o c e s s P u m p s

Manufactured by :

Office : No.3, Maduvankarai II Street,Alandur P.O., Chennai - 600 016.

Factory : 248/1, SIDCO Industrial Estate,Thirumudivakkam, Chennai - 600 044.

Tel 044 - 2234 97 70 Fax 044 - 2234 20 11.Telefax 044 - 2244 37 43.E-mail prakashpumps@gmail.com

Polypropylene Centrifugal PumpsBack Pull Out Design

For Corrosive Chemicals

Applications:

Loading & Unloading of Hcl, H SO .

Phosphoric Acid

Hydrofluosilicic Acid

Organic Solvents

Alcohols

Water Treatment Plant

Effluent Treatment Plant

Anodic Sludge/Electroplating baths

Acid pickling

Scrubbed liquids containing F, Cl, SO , -

and Ammonia gases.

Chlorinated Brine.

2 4

2

Range of Coverage:

Capacity : 60 m /hr.

Head : 45 metres

Temp : 100 C

Speed : 2900 RPM

3

O