design and optimisation using finite element analysis applied to an automotive sub-frame and its use...
TRANSCRIPT
Jasvir Singh Dhillon work sample [email protected]
SF543, Stringfellow Hall, Cranfield University, Bedfordshire, MK43 0FX +44 (0) 7459174969
Project: Formula Student, Italy (2014)
CAD, FEA analysis of a tubular-
spaceframe/chassis
Using CATIA, Hyperworks & Optistruct
Project: Durability enhancement, Modal and FRF Analysis of a Subframe (2014-15)
Softwares used: Creo, Hypermesh, Optistruct & Nastran
Von Mises Stress Plot
2D- shell Mesh
Modal plot
2D shell mesh
Jasvir Singh Dhillon work sample [email protected]
SF543, Stringfellow Hall, Cranfield University, Bedfordshire, MK43 0FX +44 (0) 7459174969
Individual Project (2014)
Stress analysis of a Crankshaft model
due to compliance
Using CREO, Hyperworks &
Optistruct
Project: Formula Student, Italy(2015)
Softwares used: CATIA, OptimumLap, OptimumTire, LotusShark, Hypermesh, Optistruct & Nastran
In-wheel assembly
CAD (Creo)
3D Tetra Mesh
Upright Mass optimisation
OptimumLap Traction Model OptimumLap Gearshift cycle/lap for pneumatic-shift
system design
and more......