design and manufacture of eco-friendly coating systems · cataphoresis is a surface treatment able...
TRANSCRIPT
Backed by 20 years experience in cooperation with partners operating in this field, CFIMPIANTI S.r.l. were founded with the aim to build upon the experience gained and to supply their customers with a more and more technological and competitive service, so as to make any system type possible to manufacture. The Company fully take on coating related issues and choose custom based programmes, cooperating closely with the most important chemical suppliers and varnish producers. The outcome is a product characterised by high quality standards to meet any client's requirements. Innovation and research are of paramount importance and the best Technical and Commercial staff actively take part in the company's programme. In addition, CFIMPIANTI S.r.l. avail themselves of third party companies, supplies and labour for a continuous exchange of ideas and projects.
Who we are
1................................................................................................................
................................................................................................................
Who we are
2
MANAGEMENT
TechnicalSales
Manager
ProductionManager
PlantManager
Sales Design Purchase
ProjectManager
Personnel AdministrationQualityControl
Assurance
Workshop and Construction Sites
Maintenance SupervisorWelderInstaller
Warehouse-keeper
...............................................
...............................................
...............................................
...............................................
...............................................
............................................... ...........................
...........................
Design and Installation of Complete Systems
Our Production1. Made-to-order design of any coating system.2. Line designs: emission tubes, gas, air, water pipes etc.3. Designs of automatic and manual handling systems.4. Complete systems for water coating.5. Design and manufacture of electrical switchboards with P.L.C. control panel.6. Manufacture of static polymerisation ovens (custom-made).
.................................................................................................................
.................................................................................................................
.................................................................................................................
3
Products and Services
Complete pre-treatment, coating, polymerisation, cataphoric and anaphoric systems. These may be automatic, manual, based on the continuous cycle and step methods.Complete systems with double rail handling systems for aluminium bar coating.Pre-treatment with spray and dip system, operated with bridge cranes for diverse dips, controlled by P.L.C..Manufacture of powder application booths of the following types: manual static, manual and automatic; in continuous cycle, mono-colour and quick colour switch; powder application systems.Eco-friendly coating: water coating application systems; coating booths with dry suction; water layer coating booths; coating booth with activated carbon filters.Complete systems for demineralised water production; ultrafiltration systems; water softening systems;continuous cycle systems for sludge removal by filter press.
4
Products and Services
........................................................................................................................
....................................................................................................................
........................................................................................................................
Cataphoresis
Cataphoresis is a surface treatment able to give iron and stainless steel parts a considerable corrosion resistance; characterised by the uniform settlement of an epoxy resin onto the part's surface. This ensures a long-term protection against atmospheric agents and other kinds of attacks, also enabling an enhanced polyester powder varnish adherence. This technology is very popular in the automotive field.Cataphoric coating is a process based on the dipping of parts into a bath composed of water-diluted varnish, which entirely coats the surfaces of the dipped parts through current circulation. Certain painting systems strictly require the production of demineralised water. In this case, we suggest a resin exchange demineraliser to be studied case by case. When necessary, we also suggest continuous water recirculation systems, in order to keep the physical properties unchanged with a remarkable water saving.
Products and Services
5
3600
7200
1530 11000 6330
18860
4100
3100
5000
300
6800
2300
14400
18860
.................................................................
.................................................................
.................................................................
Parts pre-treatment machines
Pre-treatment brings the part's surface into optimal conditions in order to obtain a better coating. Our pre-treatment tunnels are built with extreme care, being entirely made from stainless steel AISI 304 or 316L, according to the customer's requirements. They are designed in close cooperation with the best chemical product suppliers.Pre-treatments on plastic or metal manufactures, can be of the following types:
- By immersion into bridge crane tanks for managing the diverse phases.
- By tunnel spray and overhead conveyor.
- Through blasting, by static or continuous machine.
6
Products and Services
........................................................................................................
........................................................................................................
Coating Booths
We design and manufacture coating booths of different dimensions and shapes.Every single part is manufactured from high quality materials, while precision technologies ensure easy maintenance, a limited colour switch time and remarkable savings.
7
Products and Services
............................................................................................................
............................................................................................................
............................................................................................................
...........................
...........................
Drying/Polymerisation Ovens
Our oven production is very wide both for oven and power supply type.Ovens can be made as follows:
1. Pit type drying oven for tank systems.2. In-line drying oven for coating systems with overhead conveyors.3. Static polymerisation oven, that is with leaf doors.4. In-line polymerisation oven.5. Bell-shaped in-line polymerisation oven, for energy saving.
8
Products and Services
..........................................................................................................
..........................................................................................................
..........................................................................................................
..............................
..............................
Powder Gelation System
Conveyor SystemsWe design and manufacture conveyor systems, according to the customer's system requirements.Our systems comply with the most recent safety guidelines.The conveyor systems generally range among:
1. To carry from 20 kg up to 150 kg per meter, single rail overhead conveyors with bi-planar chain.2. To carry from 100 kg up to 2.000 kg per meter, Morris type overhead conveyors.3. For special productions (parts accumulation, stationary loads, etc.), double rail overhead conveyors.
9
Products and Services
..........................................................................................................
..........................................................................................................
..........................................................................................................
.................................
.................................
P.L.C. Electrical Switchboards on System Board
All our systems are equipped with control electrical switchboard, designed and manufactured by us.The electromechanical and/or electronic performance ensures full control of the operations. The electric switchboards with built-in P.L.C. can be supplied with specific software programmes for the system's resource management.
10
Products and Services
...........................................................................................
...........................................................................................
...................................................................................................................
.......................
.......................................
Layout of a Powder Application System “Specific Containers” in the Automotive Field
0,00
11
Products and Services
Pictures of a Powder Application System “Specific Containers” in the Automotive Field
12
Products and Services
...............................................................................................................
.........................................................................................................
...............................................................................................................
Layout Powder-Liquid coating system with pre-treatment for the production of metal ledges.
13
Products and Services
Pictures of a Powder-Liquid coating system for the production of metal ledges.
...................................................................................................................
...................................................................................................................
...................................................................................................................
14
Products and Services
1 2 34
5
7
6
Fig. 1
Quadro elettrico di comando
Cabina applicazione polveri elettrostatiche
Forno di asciugatura/polimerizzazione
Zona di pretrattamento
DescrizionePos. Quantità
3
1
2
4
1
1
1
1
Note
Ad immersione
Statico
Tipo a cartucce
10 Kw
Alimentazione GPL o Metano 250.000 K cal cada 15 2
3
4
1
2
CARICO
ASCUUGATURA
VERNICIATURA
POLIMERIZAZZIONE
SCARICO
LINEA PARANCO
BINARI AEREI
5
5
Fig. 2
Manual Powder Coating Systems with Pre-
TreatmentSee Fig. 2
Powder Coating SystemSee Fig. 1
15
Layout
CFIMPIANTI S.r.l.Via Santa Maria n°71
Registered Office Via Stabia N° 47 - 84012 ANGRI (SA)Phone: +39 081 513 1908Fax: +39 081 513 [email protected]
Warehouse and Office Mobile: +39 335 [email protected]
Sales Department
Technical DepartmentMobile: +39 335 [email protected]
16
Where we are
www.cfimpiantisrl.com
.........
Angri
Technical Assistance Service
CFIMPIANTI S.r.l. offer their customers a valuable assistance service, both on their own products and on multi-brand equipment, thus ensuring a longer service life.
Grant Data Logger
17
Technical Support
Anemometer
Digital Thermometer
Hygrometer
Current Clamp
Sound Level Meter
CFIMPIANTI S.r.l. can supply and install various spare parts of which we show a list by way of an example. For quotations and offers, or for any other information, we will be pleased to answer your questions by e-mail or telephone.Oven (Type):- Round combustion chamber made from stainless steel aisi 310.- Hexagonal combustion chamber made from stainless steel aisi 310.
18
Spare Parts
Conveyor
Oven
Round combustion chambermade from stainless steel aisi 310
Hexagonal combustion chambermade from stainless steel aisi 310
Tunnel
.........................................
....
....
....
....
....
....
....
.............
......................................
Filters
CFIMPIANTI S.r.l. Via Stabia N° 47 - 84012 Angri (SA) Italy
Phone: +39 081 513 1908 Fax: +39 081 513 8207
www.cfimpiantisrl.com - [email protected]
Gra
fica: R
P C
om
pute
rs -
E-M
ail:
rpco
mpute
rs@
tisca
li.it