design and execution of steel projects for industry
TRANSCRIPT
Design and execution of steel projects for industry, engineering, architecture and interior design.
Rigour and flexibility
Steel Fabrication
Steel Fabrication
4 generations in metalworkingWhether on the shop floor or in technical prowess, we’ve had it covered since the fifties. Building relationships and trust on service and customer satisfaction
Steel Fabrication
FacilitiesSite 1:
- Sitting on an 800m2 lot that includes 200m2 of outdoor patio, this site in the Rubí Sud industrial park and is equipped with a 6-tonne overhead travelling crane.
Site 2:
- Located at the Can Roses industrial park, this 400m2 site includes a 3.5-tonne overhead travelling crane.
Machining- 1 Heller universal lathe; 600mm max. diameter; 2m
distance between centres
- 1 Torrent universal lathe; 300mm max. diameter
- 1 Correa milling machine; 1500mm usable length
- 1 Pinacho Smart Turn 260 digital control lathe
- 2 Ibarmia column drills, diameter 45
- 3 benchtop drills - 1 Roscamat threading machine
Sheet metal and metalworking- 1 Stilmax motorised plate rolling machine; 2m forming width; 6mm max. thickness
- 1 Stilmax hydraulic shears; 3m length; 6mm max. thickness
- 1 Stilmax hydraulic press brake; 3m length; 6mm max. thickness
- 2 manual plate rolling machines for thin sheet metal
- 1 Ajial press brake (2m x 8mm)
- 1 pyramid-type plate rolling machine (2m x 8mm)
- 1 Geka Hidracrop`55 / SD punch press
- 1 welding rotator (up to 10,000kg capacity)
- 1 hacksaw and 2 circular saws
- 2 blowtorches
- 2 plasma torches
- 7 MIG welding devices
- 3 electric resistance welding devices
- 2 TIG welding devices
- 1 welding rotator (up to 2,000kg capacity)
- 3 welding positioners
- 1 paint booth
Steel Fabrication
Flexibility- Rapid response at every phase of the
project- Adaptability to our clients’ needs
Steel Fabrication
We can guide you through the whole project- Design - Technical consulting - Calculations - Project certification
Steel Fabrication
We tailor our production to your needsIndustrial sheet metal, metal fabrication and machining- Specialised equipment for the development of prototypes,
one-off production batches and any work in sheet metal, metal fabrication and machining
Welding- Carbon and stainless steel welding
Erecting and installation- Our qualified operators can set mechanical installations of
pipe, structures, platforms, staircases, etc.
Steel Fabrication
Our certified welders’ work is backed by adherence to quality standardsITCS-certified welding- WPS: UNE-EN-ISO 15609-1
- WPQR: UNE-EN-ISO 15614-1
- WPQ: UNE-EN-ISO 9696-1
Quality materials underwriting our work- Carbon steel
- Stainless steel: Aisi 304/316/316 L and AISI 321 H for high temperatures
Equipment approved by- SGS, EUROCONTROL, SCI and ATISAE
Calculations and projections- Our calculations of equipment needs are based on analysis of
a range of factors (mechanical, seismic, temperature, etc) and provided by J. Mabres engineering.
Steel Fabrication
Sidasa Químico
Acsa Sorigue Obra Publica
Itrón / Shlumberger Bancos de calibración para contadores de agua y gas
Wanner y Viñas / Saint Gobain Insonorización industrial
Regaber Agua, depuradoras y filtración
Novartis Farmacia
Mapner Soplantes y compresores
IPB Ingeniería
Construcciones Mecánicas Pedro Gil Bombas de vacío, roots, compresores
Abello Linde S.A. Gases químicos
Industrias Eléctricas Soler Recipientes a presión y intercambiadores
Plastoquímica S.L. Tratamiento químico del aire
Ros Roca Medio ambiente
Novair Tratamiento del aire
Europastry Alimentación
References