desalter & dehydrator -...

1
SINACO works with our partner who engages in development, designing, manufacturing, installation, commissioning and service of technical equipment of high voltage electrostatic oil-water separation in China. Our partner has more than 30 years of experience on the research of electric desalting and dehydrating technology for crude oil in refinery and oil-water separation technology in oilfield. Today their products are exported to Singapore, Jordan, Russia, Algeria, Sudan, Iraq, Brazil, Chad, Iran and Kazakhstan. Our partner is ISO certified and possessed the Class 1, Class 2 and Class 3 pressure vessel designing and manufacturing certificates; ASME U and U2 pressure vessel design and manufacturing qualifications. DESALTER & DEHYDRATOR INTRODUCTION PRODUCT & SPECIFICATION We provide professional & prompt technical services from our competent and well-trained specialist. On-site Installation or Installation Supervision Service Periodic Maintenance and Parts Replacement Services Electric Desalting System Operation Optimization Service Equipment Operating Cycle Monitoring Services Small tank, low power, high dehydration rate Salt content in crude oil is <10ptb Water content in crude oil after dehydration is <0.2% Oil content in drainage is <150ppm Operation power consumption is <0.18kwh/t crude oil ELECTRIC DESALTING SKID Small tank, low power, high dehydration rate Water content in crude oil after dehydration is <0.5% Oil content in electric dehydrator drainage is <1000ppm Operation power consumption is <0.18kwh/t crude oil ELECTRIC DEHYDRATOR SKID Compact, high separation efficiency, automatic control 100% remove droplet >150μm in gas Water content in oil is <30% Oil content in water is <1500ppm TEST SEPARATOR SKID Compact, high separation efficiency, automatic control 100% remove droplet >150μm in gas Water content in oil is <30% Oil content in water is <1500ppm PRODUCTION SEPARATOR SKID TECHNICAL SUPPORT

Upload: nguyentram

Post on 13-Mar-2018

220 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: DESALTER & DEHYDRATOR - sinaco.sgsinaco.sg/wp-content/uploads/pdf/Desalter_Dehydrator.pdfDESALTER & DEHYDRATOR INTRODUCTION PRODUCT & SPECIFICATION We provide professional & prompt

SINACO works with our partner who engages in development, designing, manufacturing, installation, commissioning and service of technical equipment of high voltage electrostatic oil-water separation in China. Our partner has more than 30 years of experience on the research of electric desalting and dehydrating technology for crude oil in re�nery and oil-water separation technology in oil�eld. Today their products are exported to Singapore, Jordan, Russia, Algeria, Sudan, Iraq, Brazil, Chad, Iran and Kazakhstan.

Our partner is ISO certi�ed and possessed the Class 1, Class 2 and Class 3 pressure vessel designing and manufacturing certi�cates; ASME U and U2 pressure vessel design and manufacturing quali�cations.

DESALTER & DEHYDRATORINTRODUCTION

PRODUCT & SPECIFICATION

We provide professional & prompt technical services from our competent and well-trained specialist.

• On-site Installation or Installation Supervision Service• Periodic Maintenance and Parts Replacement Services• Electric Desalting System Operation Optimization Service • Equipment Operating Cycle Monitoring Services

• Small tank, low power, high dehydration rate• Salt content in crude oil is <10ptb• Water content in crude oil after dehydration is <0.2%• Oil content in drainage is <150ppm• Operation power consumption is <0.18kwh/t crude oil

ELECTRIC DESALTING SKID

• Small tank, low power, high dehydration rate• Water content in crude oil after dehydration is <0.5%• Oil content in electric dehydrator drainage is <1000ppm• Operation power consumption is <0.18kwh/t crude oil

ELECTRIC DEHYDRATOR SKID

• Compact, high separation e�ciency, automatic control• 100% remove droplet >150μm in gas• Water content in oil is <30%• Oil content in water is <1500ppm

TEST SEPARATOR SKID

• Compact, high separation e�ciency, automatic control• 100% remove droplet >150μm in gas• Water content in oil is <30%• Oil content in water is <1500ppm

PRODUCTION SEPARATOR SKID

TECHNICAL SUPPORT