Department of Production Engineering

20th April 2017

List of Research Publications:

International Journal Publication by Prof. S. M. Pise

1. Prof.S.M.Pise, Various flexible fixturing systems in manufacturing- A review” Paper published in International journal on innovative research in Science, Engineering and Technology, Sept. 2015 2. Prof.S.M.Pise, Paper Published in International Conference at EXHFT 08 Portugal. Paper title: Investigation of waste heat recovery from refrigeration system April 13 3. Prof.S.M.Pise, Investigation of Waste heat recovery from Bulk Milk Cooler, case study in Thermal Engineering -4 (2014) 136-143,International Elsevier publisher Ltd.,August 2014 4. Prof. S.M.Pise, Investigations of energy saving in Bulk milk Cooler by Waste heat recovery International Review of Mechanical Engg. (I.R.E.M.E) January 2015 5. Prof.S.M.Pise, Energy saving by Waste heat recovery from Bulk Milk Cooler using shell and coil Heat Exchanger 3rd International conference on Recent trends in Engineering & Technology(ICRTET 2014) powered by Elsevier May 2015 6. Prof.S.M.Pise, enhancing productivity of core shop by improved plant layout” paper published in National Conference on Recent trends in Mechanical Engg. 2016 organized by WCE Sangli, ISBN:978-81-93514 July 2016 7. Prof.S.M.Pise, Industrial Institute collaboration for mutual benefit” paper published in National Conference on Impact of Assessment & Accreditation on higher professional Institute,(A2HPI) Jan 2016. 8. Prof.S.M.Pise, Impact of value additional training program on Enhancing Employability” paper published in National Conference on Recent trends in Mechanical Engg. 2016 organized by WCE , 978-81-93514 July 2016’ 9. Prof.S.M.Pise, The role of professional societies in Accreditation and development of Institute” paper published in National Conference on Impact of Assessment. 10. S. M. Pise, “Design of Experiments Process Parameters Optimization for Consistent Quality”, Proc. of National Conference Advances in Mehanical Engineering, NAME – 2004, JNN College of Engineering, Shimoga, 12th-14th Feb.2004 11. S. M. Pise, V. V. Kulkarni, V. V. Khanzode, N. V. Pujari, “Design of Plant Layout and Material Handling System – A Case Study of A Machine Shop Manufacturing Crankshafts and Connecting Rod,” Proc. of National Conference on Emerging Trends in Thermal Engineering, Competitive Manufacturing and Management, TECM-2005, St. Joseph’s College of Engg., Chennai. 12. S. M. Pise, V. V. Kulkarni, V. V. Khanzode, N. V. Pujari, “Computer Aided Fixture Design CAFD A Review” Proc. of National Conference on Recent Trends in Manufacturing , NCRTM 2006 KIT,s College of Engg. Kolhapur. 13. S. M. Pise, V. V. Kulkarni, V. V. Khanzode, N. V. Pujari, “Total Productive Management (TPM)-Technique for Productivity Optimization, A Case with respect to Printing Machine Manufacturing Line”, National Conference, SERS College of Engg. Kopargaon 14. S. M. Pise, S. S. Mane, S. B. Sangale, Takalkar Atul S., “Impact of Value Additional Training Programs on Enhancing Employability”, National Conference on Impact of Assessment and Accreditation on Higher Professional Institutes, KIT’s College of Engineerig, Kolhapur. Jan 2016. 15. Received a best paper award for a paper on “Resource Optimization Through Low Cost Automation - A Case Study”, International Conference on Recent Trends in Automation & Its Adaptation to Industries, PICA - 2006, Organized by Priyadarshini College of Engineering & Architecture, Nagpur, July 11-14, 2006. 16. Received a best paper award for a paper on “Just-In-Time Manufacturing System: A Case Study of High Pressure Hydraulic Fittings Manufacturer”, National Conference on Challenges in Achieving Global Quality. Organized by Thiagarajar College of Engineering, Madurai May, 24-25, 2004. 17. Sapali S. N., Pise S. M., Pise A. T., Ghewade D. V., “Investigations of waste heat recovery from bulk milk cooler”, Case Studies in Thermal Engineering - 4 (2014) 136-143 , Elsevier Publishers Ltd. 18. Sapali S. N., Pise S. M., Pise A. T., Ghewade D. V., “Investigations of energy savings in bulk milk cooler by waste heat recovery”, International Review of Mechanical Engineering (I.R.E.M.E.), Vol 8, N. 6 November 2014, ISSN 1970-8734. 19. Pise S. M., Patil S. M., “Modal and Stress Analysis of Differential Gearbox Casing with Optimization”, International Journal of Engineering Research and Applications ISSN : 2248-9622, Vol. 3, Issue 6, Nov-Dec 2013, pp.188-193 20. Pise S. M., Sapali S. N., Pise A. T., Ghewade D. V., “Investigations of waste heat recovery from bulk milk cooler”, EXHFT -8, 8th World Congress on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics. Lisbon, Portugal, October 28, 2012. 21. Pise S. M., Sapali S. N., Pise A. T., Ghewade D. V., “Energy savings by waste heat recovery from bulk milk cooler using shell and coil heat exchanger”, 3rd International Conference on Recent Trends in

Department of Production Engineering

20th April 2017

Engineering & Technology (ICRTET 2014), SNJBs Late Sau K. B. Jain College of Engineering, Chandwad, March 28-30, 2014. 22. Pise S. M., Sapali S. N., Pise A. T., Ghewade D. V., “Investigations of waste heat re- covery from bulk milk cooler”, Poster presentation, EXHFT -8, 8th World Congress on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Lisbon, Portugal, October 28, 2012. 23. Pise S. M., Patil G. A., “Resource Optimization Through Low Cost Automation – A Case Study” International Conference on Recent Trends in Automation & Its Adaptation to Industries, PICA - 2006, Organized by Priyadarshini College of Engineering & Architecture, Nagpur, July 11-14, 2006, pp.64 24. Pise S. M., Teli S. N., “ Analysis of the Lathe Spindle Using FEM”, International Conference on Recent Trends in Automation & Its Adaptation to Industries, PICA-2006, Organised by Priyadarshini College of Engineering & Architecture, Nagpur, July 11-14, 2006, pp. 55. 25. Pise S.M., Ghewade D. V., Mane S. S., Pujari N. V., “FEA of a Plate Cylinder of a printing machine subjected to UDL: a case study”, Advances in Machine Design and Industry Automation (ICAMDIA), Organised by Department of Mech. Engg. Govt. College of Engineering, Pune, January 10-12, 2007, pp. 157-160. 26. Pise S.M., Ghewade D. V., Mane S. S., Pujari N. V., “Total Productivity Management in a Small Scale Industry - A case study”, Advances in Manufacturing and Technol-ogy Management (CAMTM2007) - Organised by Parshavnath College of Engineer- ing, Thane, Mumbai., January 18-20, 2007, pp. 187-195. 27. Pise S. M., Magdum A. B., Ghewade D. V., Mane S. S., Pujari N. V., “Computer aided performance analysis system for a service industry - A case study”, Advances in Manufacturing and Technology Management (CAMTM2007) - Organized by Parshavnath College of Engineering, Thane, Mumbai. January 18-20, 2007, pp. 413-418. 1. Pise S. M., Sapali S. N., Pise A. T., Ghewade D. V., “Waste heat recovery and its effects on performance of refrigeration system”, National Conference on Advances in Heat and Mass Transfer, October 30-31, 2009, FAMT Campus, Ratnagiri, Maharashtra, India. 2. Pise S. M., Sapali S. N., Pise A. T., “Investigations of waste heat recovery from refrigeration system”, Technical Meet on Industrial Waste Heat Recovery, Organized by FICCI & PCRA at Mumbai, January 29-30, 2013, 3. Ghewade D. V., Sapali S. N., Pise S. M., “ Energy Exergy analysis of Bulk Milk Cooler”, National Conference on Energy Management in Marine and engineering Applications (EMMEA-2007), Organised by Tolani Maritime Institute, Pune, March,2-3, 2007. pp. 28. 4. Pise S. M., Pujari N. V., “Just-In-Time Manufacturing System: A Case Study of High Pressure Hydraulic Fittings Manufacturer” in National Conference on challenges in Achieving Global Quality. Organised by Thiagarajar College of Engineering, Madurai on May, 24-25, 2004, pp.243-248. 5. Pise S. M., Kulkarni V. V., “Design of experiment process Parameters Optimization for Consistent Quality”, National Conference on Advances in Mechanical engineering, Organised by JNN College of Engineering, Shimoga, February, 12-14, 2004, pp 28-29. 6. Pise S. M., Khanzode V. V., “Computer Applications in DFMA for Design Optimization”, National Conference on Recent Trends in CAD/CAM/CAE (NCRTC-2004), Organized by RIT Sakhrale, June, 21-23, 2004, pp. 21-24

International Journal Publication by Prof. S. G. Bhatwadekar:

1. S. H. Surekar, S. G. Bhatwadekar & D. S. Bilgi, (2012), "Conceptual Study of Parameter Optimization in Machining Process", International Journal of Advanced Scientific & Technical Research, Issue 2, Vol. 4, Aug 2012, pp. 670-678, ISSN 2249-9954. 2. S. H. Surekar, S. G. Bhatwadekar, W. G. Kharche & D. S. Bilgi, (2012),"Determination Of Principal Component Affecting Material Removal Rate In Electrochemical Machining Process", International Journal of Engineering Science and Technology, Vol. 4 No.05 May 2012, pp 2402-2408, ISSN : 0975-5462. 3. Dandage R. V., Bhatwadekar S. G., Bhagwat M. M., (2012), "Design, Development And Testing Of A Four Component Milling Tool Dynamometer", International Journal of Applied Engineering and Technology ISSN: 2277-212X (Online), Vol. 2 (1) January-March, pp 45-50. 4. Bhatwadekar, S. G. & Khire, M. Y., “Statistical Verification of Performance of Genetic Algorithm in Scheduling”, International Journal of Engineering Science and Technology, Vol. 2(12), 2010, 7087-7092 5. S. K. Sindhe, S. G. Bhatwadekar, V. V. Kulkarni & Satish Mullya, (2013), “ Static, Modal, and Fatigue Life Prediction through CAE foe a Leaf Spring used in Light Commercial Vehicle”, International Journal of Science and Research, ISSN: 2319-7064 (Online), Vol. 2, (3), pp 474-481. 6. Bhatwadekar S. G. & Khire M. Y., (2013), Monitoring population divergence in job shop scheduling problems using Genetic algorithm, International Journal of Engineering Science and Technology, Vol. 5 No.07 July 2013, pp. 1355-1365.

Department of Production Engineering

20th April 2017

7. Murali M. Ambekar & S. G. Bhatwadekar, (2013), Petri net based modeling of FMS and its deadlock prevention, International Journal of Mechanical and Production Engineering (IJMPE) ISSN No.: 2315-4489, Vol-2, Iss-1, 2013, pp.65-71 8. Suresh H. Surekar, Sudhir G. Bhatwadekar, Dayanand S. Bilgi, (2014), Analysis of Electrochemical Machining Process Parameters Affecting Material Removal Rate of Hastelloy C-276, International Journal of Advanced Research in Engineering and Technology (IJARET), ISSN 0976 – 6480 (Print), ISSN 0976 – 6499 (Online) Volume 5, Issue 1, pp.18-23 9. Kashid, D. V., S. G. Bhatwadekar, S. B. Sangale, P. R. Kubade, (2014), Investigations of Effect of Process Parameters on Material Removal Rate in Wire-cut EDM of steel grade EN 9, International Journal of Emerging Engineering Research and Technology, Vol. 2, Issue 1, pp. 1-4 10. D. V. Kashid and S. G. Bhatwadekar (2014), Effect of Process Parameters on Material Removal Rate of WEDM for AISI D7 Tool Steel, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN(P): 2249-6890; ISSN(E): 2249-8001, Vol. 4, Issue 2, Apr 2014, pp. 99-106 11. Mulla M. L., Bhatwadekar S. G., Pandit S. V. (2014), Implementation of Lean Manufacturing Through The Technique of Single Minute Exchange Of Die (SMED) to Reduce Change Over Time, International Journal of Innovative Research in Science, Engineering and Technology, ISSN: 2319-8753, Vol. 3, Issue 6, pp. 13069-13076 12. Sameer S. Gajmal & Sudhir G. Bhatwadekar, (2014), Low Cost Automation : A Case Study, International Journal of Advanced Engineering & Global Technology, ISSN: 2309-4893, Vol. 2, Issue 12, Dec. 2014, pp. 172-180 13. Vikram M. Patil, S. G. Bhatwadekar, S. M. Kadane, Dr. H. A. Mandave, (2014), Value Stream Mapping: Simulation Approach, International Journal of Emerging Technologies and Applications in Engineering, Technology and Sciences (IJ-ETA-ETS) ISSN: 0974-3588, December 2014, Special Issue, pp. 38-43 14. Vinayak D. Yadav, S. G. Bhatwadekar, (2014), Friction Stir Welding of Dissimilar materials between AA6101 Aluminium and pure Copper, International Journal of Engineering Sciences & Research Technology, ISSN: 2277-9655, 3(12): December, 2014, pp. 505-508 15. Prof. M. H. Kulkarni, Prof. S. G. Bhatwadekar,(2015), “Development and Evaluation of Dynamic Scheduling System for Flexible Manufacturing Environment”, International journal of Latest trends in Engineering and Technology(IJLTET),Volume:5, Issue:1, Jan.2015,ISSN:2278-621X 16. Porlekar Sagar, Sudhir Bhatwadekar, Kulkarni G R, (March 2017), Design, analysis and optimization of brake disc made of composite material for a motor cycle, International Journal of Research Publications in Engineering and Technology [IJRPET],VOLUME 3, ISSUE 3, March-2017.

International /National conference Publication by Prof. S. G. Bhatwadekar

1. Bhatwadekar, S.G. & Khire, M.Y., “Genetic Algorithm and Job Shop Scheduling”, (Accepted for publishing in Industrial Engineering Journal of IIIE). 2. Bhatwadekar, S.G., Deshingkar, A.V., “ Optimization of Product Mix: A Case Study”, National Convention ORSI 91, IISc Bangalore 3. Bhatwadekar, S.G., Shimpukade, B.S., “ Multi-Product Batch Scheduling: A Case Study”, National Convention ORSI 92, IIM, Ahmedabad 4. Bhatwadekar, S.G., “Components of Cell Controller: A Brief Review of Opportunities Offered by Mechatronics”, National Conference on Advances in Mechanical Engineering, NCOAIM 2003, GH Raisoni COE, Nagpur 5. Bhatwadekar, S.G., “Comparison of Total Weighted Tardiness and Completion Time as a Measure of WIP Inventory on a Single Machine –n Jobs Scheduling Problem”, National Conference on Advances in Mechanical Engineering, NCOAIM 2003, GH Raisoni COE, Nagpur 6. Bhatwadekar, S.G., Kulkarni, A.V. “Performance Analysis and Optimization of Manufacturing System using Simulation – A Case Study”, National Conference TIME-2003, Kaktiya Institute of Tech. and Science, Warangal 7. Bhatwadekar, S.G., “A Comparative Study of Dispatching Rules for n-Jobs Single Machine Scheduling Problem”, National Conference NCTRTC, RIT, Sakhrale (MAH) 8. Bhatwadekar, S.G., “ Investigations using Tabu Search Method on Single Machine Scheduling Problem with Weighted Tardiness”, National Conference GTMTS 2004, Sethu Institute of Technology, Pulloor (TN) 9. Bhatwadekar, S.G., “Investigations using Simulated Annealing on n Job Single Machine Scheduling Problem with Multiple Objectives“, National Conference TAME 2005, Sreenidhi Institute of Technology, Hyderabad 10. Teli, S. N. and Bhatwadekar, S.G., “Design Aspects of Medical Nano-Robots”, National Conference INCOMM-IV, 2005, Karunya Institute of Technology & Science, Coimbtore

Department of Production Engineering

20th April 2017

11. Bhatwadekar, S.G. and Latkar, S.D., “Branch and Bound Technique for a Multi-Objective Scheduling Problem”, International Conference ICORAID 2005 (ORSI), IISc, Bangalore 12. Teli, S. N. and Bhatwadekar, S.G., “Robotic Six Legged Walking Machine”, International Conference PICA 2006, Priyadarshini College of Engineering, Nagpur 13. Karidkar S.S. and Bhatwadekar, S.G., “ Productivity Improvement Through Implementation of ERP – A Case Study”, International Conference on Frontiers in Design and Manufacturing Engineering, ICDM-08, 2008, Karunya Institute of Technology & Science, Coimbtore 14. Powar, P.P. and Bhatwadekar, S.G., “Design for manufacturing and assembly of Multi spindle SPM”, International Conference on Recent Developments in Mechanical Engineering, 2009, SUS College of Engineering & Technology Tangori, Mohali (Punjab) 15. Dandage, R. V. and Bhatwadekar, S.G., “ Design and Fabrication of a Strain Gauge Based Four Component Milling Dynamometer”, National Conference on Advances in Mechanical Engineering”, 2009, Manjara Charitable Trust’s Rajiv Gandhi Inst of Tech., 244-246 16. Dandage, R. V. and Bhatwadekar, S.G., “ Design and Fabrication of a Strain Gauge Based Four Component Milling Dynamometer”, 3rd International Conference on Advances in Mechanical Engineering, Jan. 2010, SVNIT, Surat, 638-642 17. Kadane S.M. and Bhatwadekar, S.G., “Design and Optimization of Facility Layout”, National Conference on Advances in Mechanical Engineering, MIT Manipal, Jan 2011, 18. Sangale, S. B., Kulkarni, V.V. and Bhatwadekar, S.G., “ Application of Family Design Tables in Design of Reconfigurable Fixtures for Part Families”, National Conference on Advances in Mechanical Engineering, MIT Manipal, Jan 2011, 19. Surekar S.H.,Bhatwadekar S.G.,Kharche W.G.,Bilgi D.S. “Study of the methods of improving material removal rate in Electro chemical machining” International Conference on Industrial Engineering, organized by SVNIT,Surat on 17th -19th Nov.2011 20. Bhatwadekar S.G, “Machining of Hard Passive alloys & Composite Materials”International Conference on New Development and challenges in engineering ,technology & management,22nd march 2012 21. Bhatwadekar S.G, “Conceptual Study & Optimization of Parameters Affecting Material Removal Rate In Electochemical Machining Process”International Conference on New Development and challenges in engineering ,technology & management,22nd march 2012 22. Bhatwadekar, S.G. & Khire, M.Y, “Job shop scheduling with genetic algorithm” Industrial Engineering Journal,Vol V&Issue No.5,May 2012,40-42

International Journal Publication by Publication by Dr.J.S.Bagi:

1. Jay S. Bagi Mahesh R. Mali, Prabhakar D. Maskar, Shravan H, “Design Optimization of Cam & Follower Mechanism of an Internal Combustion Engine for Improving the Engine Efficiency”, (2012), Journal International Journal Modern Mechanical Engineering, ISSN 2164-0165, DOI 10.426/mme.2012.23014, and Volume: 2, Pages: 114-119 2. C. D. Lokhande, N.M. Shinde, A. C. Lokhande, J.S. Bagi, “Biosynthesis of large area (30x30 cm²) silver thin films”, (2014), Journal: Materials Science in Semiconductor Processing ISSN: 1369-8001, Volume: 22, Pages: 28-36, Publisher: Elsevier 3. D A Pathak, J S Bagi, “Quality Enhancement of Manufacturing Process by Simulation Technique: A Case Study”(2012), Journal: International Journal of Engineering Science & Technology, Volume:4, Issue:6,Pages:2576-2580 4. MT Sawant, JS Bagi, “Quality improvement through automation of product design process in a manufacturing organization”, (2012),Journal: International Journal for Quality Research,Volume:6,Issue:1,Pages:1-7 5. R T Salunkhe, JS Bagi, “Assessment of Quality Objectives in a Manufacturing Organization -A Case Study at ABC Industry”(2011),Conference: International Journal of Engineering Science and Technology,Volume:3,Issue:10,Pages:7377-7388,Publisher:Engg Journals Publications 6. A C Lokhande, J S Bagi, “Studies on enhancement of surface mechanical properties of electrodeposited Ni–Co alloy coatings due to saccharin additive”, ( 2014), Journal: Surface and Coatings Technology, Volume: 258, Pages: 225-231, Publisher: Elsevier 7. Jaydeep S. Bagi & Nilesh T. Mohite, “Optimization of Geometrical Parameters of Resistance Spot Welding Process for Strength of Welded Joints”, (2014),Journal:International Journal of Emerging Engineering Research and Technology, ISSN 2349-4395 (Print) & ISSN 2349-4409 (Online),Volume:2,Issue:5,Pages:PP 60-66,Publisher: SRYAHWA Publications 8. Ashwini G. Joshi and Jaydeep S. Bagi, “Improvement of Productivity & Quality Dimensions of a foundry process with TPM technique - A Case Study”, (2013),Journal: National Journal Productivity, ISSN: 0032-9924,Volume:54,Issue:2,Pages:178-194,Publisher: National Productivity Council, New Delhi

Department of Production Engineering

20th April 2017

9. Aditya S Dhobale, Jaydeep S Bagi, “Simulation-based Layout Optimization of a Camshaft Manufacturing Plant for Productivity and Quality Improvement.”, (2013),Journal:Productivity,Volume:54,Issue:2 10. “5S Strategy For Productivity Improvement: A Case Study”, (2013), Journal: Paripex - Indian Journal Of Research, ISSN - 2250-199,Volume:2,Issue:3,Pages:151-153,Publisher:PARIPEX - Indian Journal of Research 11. Prof. J. S. Bagi R. A. Pasale, “5S Strategy: A workplace improvement lean tool”, Publication date: (2013), Journal:Journal of Engineering and Technology Research, ISSN: 2348-0424,Volume: 1, Issue:1, Pages:100-107,Publisher:Scientia Research Library 12. Sayaji B. Patil and Jaydeep S. Bagi, “Productivity Improvement through development of Special Purpose Machine Tool – A Case Study”, (2012),Journal: International Journal of Advances in Science and Technology, ISSN : 2229 5216,Volume:4,Issue:3,Pages:75-97,Publisher:Silicon Valley Publishers 13. Devendra A. Pathak and Jaydeep S. Bagi, “Improvement of Manufacturing Process by Simulation Technique: A Case Study”, (2012),Journal:International Journal of Advances in Science and Technology, ISSN: 2229-5216,Volume:4,Issue:4,Pages:54-69.,Publisher: Silicon Valley Publishers 14. D A Pathak & Prof J S Bagi, “Quality Enhancement of Manufacturing Process by Simulation Technique: A Case Study”, (2012),Journal:International Journal of Advanced Manufacturing System, ISSN: 2229-5860,Volume:3,Issue:1,Pages:25-32,Publisher:International Science Press 15. Laxmi S. Nikam and Prof. Jaydeep S. Bagi, “A Study of Quality Improvement of Manufacturing Process by Simulation Technique”, (2012),Journal:International Journal of Advances in Science and Technology, ISSN 2229 5216,Volume:4,Issue:4,Pages:70-86,Publisher: Silicon Valley Publishers 16. Dr. Arvind B. Datye Prof. J.S. Bagi, Prof. V.N.Mane, “Improvement in quality dimensions of shell and tube type heat exchanger by using design software”, (2012), Journal: International Journal of Advanced Engineering Technology E-ISSN 0976-3945,Issue: I,Pages:183-188 17. JS Bagi, “Performance and Reliability Improvement in the Design and Manufacture of Water Cooled Submersible Pump and Motor by Solid Modeling and CFD”, (2011), ISSN: 0975-5462 Vol. 3 No.10 October 2011, International Journal of Engineering Science and Technology (IJEST) 18. Rajendra Salunkhe and Arwind Datye, Jaydeep Bagi , “Process Quality Optimization through Lead Time Reduction For Friction Rollers: A Case Study (2011), Journal: International Journal of Advances in Science and Technology, ISSN 2229 5216, Volume:3,Issue:6,Pages:87-122, Publisher: Silicon Valley Publishers 19. Sagar S Patil, Jaydeep S Bagi, “Quality improvement through development of special purpose machine tool-A case study”, Vol 03, Issue 06; (2012), International Journal of Engineering Sciences Research-IJESR, ISSN: 2230-8504; e-ISSN-2230-8512

National Conference Publication by Dr. J. S. Bagi:

1. 2012-Published research paper titled “Productivity Improvement through development of Special Purpose Machine Tool:A Case Study” in International Journal of Advances in Science & Technology ISSN 2229 5216,Vol.4 Special Issue No.3,2012,pp 75-97. 2. 2011 - Published research paper titled “Assessment of Quality Objectives in a Manufacturing Organization”- A Case Study at ABC Industry” in International Journal of Engineering Science and Technology, ISSN : 0975-5462, Vol. 3 No., 10th October 2011, pp 7377- 7388. 3. 2011-Published research article titled “Process Quality Optimization through lead time reduction for friction rollers:A Case Study” in International Journal of Advances in Science & Technology ISSN 2229 5216,Vol.3 Special Issue No.6,2011,pp 87-104. 4. 2011 - Published research paper titled “Performance and Reliability Improvement in the Design and Manufacture of Water Cooled Submersible Pump and Motor by Solid Modeling and CFD” in International Journal of Engineering Science and Technology, ISSN : 0975-5462, Vol. 3 No., 10th October 2011, pp 7368- 7376. 5. 2010 - Published research paper titled "Assessment of Organizational Quality Objectives in Engineering Industries” in National Conference on "Recent Advances in Design and Manufacturing Engineering" (NCRADME-2010), pp 27-28 February 2010 at T.K.I.E.T. Warananagar. 6. 2010 - Published research paper titled “Suppliers Performance Assessment Methods in Engineering Industries” in National Conference on "Recent Advances in Design and Manufacturing Engineering" (NCRADME-2010), pp 27-28 February 2010 at T.K.I.E.T. Warananagar. 7. 2008 – Published research paper titled “Design And Manufacturing Of SPM For Productivity Improvement” in an international conference on Frontiers in Design and Manufacturing Engineering organized by Karunya University, Coimbatore in Feb. 2008. 8. 2007 – Published research paper titled “A Critical Evaluation Of QMS Certification For SMEs” in an international conference on advances in manufacturing technology organized by Manipal Institute Of Technology, Manipal in Oct. 2007.

Department of Production Engineering

20th April 2017

9. 2006 – Published research paper titled “Lean Manufacturing – The Six Sigma Way.” Paer No. M06, Page No.80, Proceedings of National Conference on “Emerging Trends in Mechanical Engineering” held at B.M.S. College of Engineering, Bangalore. 10. 2005 – Published research paper titled “Linking Plant Floor To Enterprise : The Benefits & Pitfalls.” Page No. I-76, Proceedings of National Conference on “Advances in Mechanical Engineering” held at Vasavi college of Engineering, Hyderabad. 11. 2005 - Published research paper titled "Improving Work Station Designs In Small Scale Industries Through Participatory Ergonomics." Page No.49, Proceedings of National Conference on "Man-Machine interaction with special emphasis on automobile and ancillary manufacturing”, held at The Institution Of Engineers (India), Nashik Center. 12. 2005 - Published research paper titled “Information Technology In Supply Chain Management.” Page No. I-33, Proceedings of National Conference on “Advances in Mechanical Engineering” held at Vasavi college of Engineering, Hyderabad. 13. 1999 - Published an article on "CNC Technology: Foundation for future automation" in annual edition of Udyam Warta.

International Journal publications By Dr.V.V.Khanzode:

1. Khanzode V V, Maiti J, Ray P. A Comprehensive Review of Injury Research Literature in Industrial Worksystems. Communicated to Safety Science, March 2011. 2. Khanzode V V, Maiti J, Ray P. A Methodology for Evaluation and Monitoring of Recurring Hazards in Underground Coalmines. Accepted for publication in Safety Science, March 2011. 3. Khanzode V V, Maiti J, Ray P. Injury count model: Quantification of Risk of Occupational Injury in Industrial Worksystems. Accepted for publication in International Journal for Injury Control and Safety Promotion, January 2011. 4. Khanzode V V, Maiti J, Ray P, Tewari V (2010). Injury severity assessment for underground coalmine workers. Applied Ergonomics, 41:242-250. 5. Maiti J and Khanzode V V (2009). Development of a relative risk model for roof and side fall accidents in underground coal mines. Safety Science, 47:1068-1076. 6. Maiti J, Khanzode V V, Ray P K (2009). Severity analysis of Indian coal mine accidents- A retrospective study for 100 years. Safety Science, 47:1033-1042. 7. Khanzode V V and Maiti J, (2007), “Improving foundry process control: an investigation of cluster analysis and path model”, International Journal of Productivity and Quality Management, 2:404-422. 8. Khanzode V V and Maiti J, (2007), “Implementing Mahalanobis-Taguchi Technique to improve casting quality in gray iron foundry”, International Journal of Productivity and Quality Management, 3:444-456

International Journal publications By Dr.V.V.Kulkarni:

1. V. V. Kulkarni, M. Y. Khire, “Case Representation in the Domain of Adjustable Fixture Design System using Case-Based Reasoning”, International Journal of Emerging Technologies and Applications in Engineering Technology and Sciences, IJ-ETA-ETS, ISSN:0974-3588, January 2009, pp 1-6. 2. V. V. Kulkarni, M. Y. Khire, “Adjustable Fixture Design for Part Family-A Case Study” Manufacturing Technology and Management, Quarterly Journal of Indian Institution of Production Engineers, Vol. 3, No.1, Jan-March 2009, pp – 98-102 3. V. V. Kulkarni, M. Y. Khire, "Computer Aided Group Technology Classification and Coding System for Adjustable Fixture Design" Manufacturing Technology & Research: An International Journal, ISSN No: 0973-0281 Vol.5, No. 3-4, July-Dec 2009 pp: 4. G.C.Koli,V.V.Kulkarni,“Simulation of Sloshing Phenomena using ALE approach” Journal of Mechanics engineering and automation,2011,53-60 5. G.C.Koli,V.V.Kulkarni,“Simulation of Fluid Sloshing in a Tank” Proceeding of the world Congress on Engineering 2010,Vol II,WCE 2010,June 30-July 2,2010,London,U.K.

International/National Conference Publication By Dr.V.V.Kulkarni:

1. V. V. Kulkarni, M. Y. Khire, “Adjustable Fixture Design for Part Family-A Case Study” Manufacturing Technology and Management, Quarterly Journal of Indian Institution of Production Engineers, Vol. 3, No.1, Jan-March 2009, pp – 98-102 2. G.C.Koli,V.V.Kulkarni,“Simulation of Sloshing Phenomena using ALE approach” Journal of Mechanics engineering and automation,2011,53-60

Department of Production Engineering

20th April 2017

3. G.C.Koli,V.V.Kulkarni,“Simulation of Fluid Sloshing in a Tank” Proceeding of the world Congress on Engineering 2010,Vol II,WCE 2010,June 30-July 2,2010,London,U.K. 4. V. V. Kulkarni, S. M. Pise, “Design of Experiments Process Parameters Optimization for Consistent Quality”, Proc. of National Conference Advances in Mehanical Engineering, NAME – 2004, JNN College of Engineering, Shimoga, 12th-14th Feb.2004. 5. V. V. Kulkarni, V. V. Khanzode, “Achieving Six Sigma Quality Levels: A case pf Connecting Rod Manufacturing Process Exposed to Global Quality Standards”, Proc. of National Conference on Challenges in Achieving Global Quality, CAGQ 2004, May 24-25 2004, Thiagarajar College of Engg. Madurai, PP 183-188 6. V. V. Kulkarni, N. V. Pujari, “JIT-A Technique to Improve Operating Efficiency: A Case Study of High Pressure Hydraulic Fitting Manufacture”, Proc. of National Conference Advances in Mehanical Engineering, AIME –04, Jawaharlal Darda Institute of Engineering & Technology, Yavatamal, 23rd-24th April 2004. 7. V. V. Kulkarni, N. V. Pujari, “Applications of Mechatronics in Lithography A case Study”, Proceedings of National Conference on Recent Trends in CAD/CAM/CAE, ncrtc2004, 21-23 June 2004, RIT Sakharale. 8. V. V. Kulkarni, V. V. Khanzode, N. V. Pujari, S. M. Pise, “Design of Plant Layout and Material Handling System – A Case Study of A Machine Shop Manufacturing Crankshafts and Connecting Rod,” Proc. of National Conference on Emerging Trends in Thermal Engineering, Competitive Manufacturing and Management, TECM-2005, St. Joseph’s College of Engg., Chennai. 9. V. V. Kulkarni, V. V. Khanzode, N. V. Pujari, S. M. Pise, “Computer Aided Fixture Design CAFD A Review” Proc. of National Conference on Recent Trends in Manufacturing , NCRTM 2006 KIT,s College of Engg. Kolhapur. 10. V. V. Kulkarni, V. V. Khanzode, N. V. Pujari, S. M. Pise, “Total Productive Management (TPM)-Technique for Productivity Optimization, A Case with respect to Printing Machine Manufacturing Line”, National Conference, SERS College of Engg. Kopargaon 11. V. V. Kulkarni, V. V. Khanzode, “Automated Modular Fixture Design –A Review” Proc. of National Level Symposium on Recent Trends in Product Design 2006, DKTE, Ichalkaranji 12. V. V. Kulkarni, V. V. Khanzode, “Flexible Fixture Systems – A Review”, Proc. Of National Conference on Factory Automation, robotics & Soft Computing, FARSC-07 NIIT, Warangal, 18th and 19th January 2007 13. V. V. Kulkarni, Usha A. Jogalekar, Dr. M. Y. Khire "Applications of Case Based Reasoning in Mechanical Engineering Design - A Review" Proc. of International Conference CITICOMS-2007 at Coimbatore on 27th to 29th August 2007, 14. V. V. Kulkarni, Dr. M. Y. Khire “An index system for Computer Aided Adjustable fixture design system with case based reasoning.” Proc. of the International Conference on ICAME -07. Manipal 15. Vinod Atpadkar, V. V. Kulkarni, “Die Design Optimization through Computer Simulation using HyperForm”, Proc. of the International Conference on ‘Advances in Mechanical Engineering’, December 15-17, 2008, S.V. National Institute of Technology, Surat – 395 007, Gujarat, India, 16. S. M. Arli, V. V. Kulkarni, “Role of BGT in Simulation Modeling & Analysis of Multi – domain Systems”, International Conference on Latest Trends in Simulation Modeling and Analysis 2009, NIT Calicut. Pp 538-543. 17. S. M. Arli, L. M. Jugulkar, V. V. Kulkarni, “ Applications of Bond Graph Theory in Mechanical Engineering Domain- A Review”, International Conference on Advances in Mechanical Engineering 2010, SVNIT Surat pp 618-622 18. Santosh Godi, V. V. Kulkarni, “Design Optimization of Gear Shift Fork”, International Conference on Advances in Mechanical Engineering 2010, SVNIT Surat pp 462-466 19. Gajanan Koli, V. V. Kulkarni, “Simulation of Fluid Sloshing in a Tank”, World Class on Engineering 2010 (WCE 2010) South Kensington Campus, Imperical College London, July 2010 20. Ravikumar Kanase, V. V. Kulkarni, “Analysis of gantry for static and transient loading”, National Conference on Advances in Mechanical Engineering 2011, 03–05 January, 2011, Department of Mechanical & Manufacturing Engineering, MIT Manipal 21. Sandesh B. Sangale, V.V.Kulkarni, S.G.Bhatwadekar, “Application of Family Design Tables in Design of Reconfigurable Fixtures for Part Families”, National Conference on Advances in Mechanical Engineering 2011, 03–05 January, 2011, Department of Mechanical & Manufacturing Engineering, MIT Manipal 22. A.R.Kharat,V.V.Kulkarni, “Study of reinforcement requirement at opening in cylindrical pressure vessel” National Conference on Engineering Trends in Engineering, Technology and Architecture, Dr.D.Y.Patil College of Engineering and Technology, Kolhapur 28-29 Jan 2012 23. Arali S.M.,V.V.Kulkarni, “Intake system design for biogas operated single cylinder 4-stroke spark ignition engine”International conference on Novel Horizons & prospects of Industry Institute Interaction,Wardha 2012

Department of Production Engineering

20th April 2017

International Journal publications By Prof.G.R.Naik

1. Rahul Joshi, G.R.Naik, “Reduction in setup time by SMED-A Literature Review” International Journal of Modern Engineering Research Published in IJMER Journal,Vol2,Issue1,Jan-Feb 2012 IJMER:ISSN:2249-6645 2. Dhole N.S.,Naik G.R.,Prabhawalkar M.S., “Optimization of milling process parameters of EN33 using Taguchi parameter design approach” Journal of Engineering Research and Studies (JERS) Vol III,Issue I,Jan-March 2012 3. Prof.G.R.Naik, “Optimization of process parameters of EN33 using Taguchi parameter apporch” (2012), Journal of engineering research and studies Volume:3 Issue:1 4. Prof.G.R.Naik, “Multiobjective criteria for selection of Manufacturing method”, in Inter. journal IJARCSSE,(2014), ISSN-227712X, Volume 4, Issue July 2014 . 5. Prof.G.R.Naik, “Process optimization by using lean manufacturing techniques (six sigma) –a case study in manufacturing industry”,(2014) Volume-3, ISSN-2319-1058. 6. Prof.G.R.Naik, “Multiobjective criteria for selection of manufacturing method using NLP Passes”, (2014), International journal on recent and innovation trends in computing and communication, Volume: 2, Issue: 11, ISSN: 2321-8169, 3484-3493, 7. Prof.G.R.Naik, “Process optimization by using lean manufacturing techniques (six sigma) –a case study in manufacturing industry”, Volume-3, ISSN-2319-1058.

National Conference Publication by Prof.G.R.Naik:

1. N.M.Dhole, G.R.Naik, “Optimizations of milling process parameters using Taguchi parameter design approach-A Review”, 3rd International Conference on advances in mechanical engineering at SVNIT,Surat,4-6 Jan 2010 2. N.M.Dhole, G.R.Naik, “Application of Taguchi Design Parameters in the Optimization of milling parameters” (cutting speed, feed rate, depth cut and tool material) of EN08, National Conference on recent trends in Mechanical Engineering, Datta Meghe College of Engg.Navi Mumbai,28-29 August 2010 3. N.M.Dhole, G.R.Naik, “Optimization of feed force for turned parts using Taguchi Design Parameter Technique-A Review” ‘Urjjitam’ National paper symposium contest, Rajendra Mane College of Engineering and Technology, Devrukh, 13-15 March 2010 4. S.J.Shah, G.R.Naik, “Advance Manufacturing Technique : Low Cost Automation” National Conference on Engineering Trends in Engineering, Technology and Architecture, Dr.D.Y.Patil College of Engineering and Technology, Kolhapur 28-29 Jan 2012 5. Girish C.Pude, G.R.Naik, “Process improvement by using value stream mapping tools”National conference on Recent advancement in engineering (NCRAE),organized by Sanjeevan Engineering & Technology Institute,Panhala,ISBN:978-93-82062-37-0,22-23 June 2012 6. Rahul Joshi, G.R.Naik, “An Overview of SMED to reduce setup time”National conference on Recent advancement in engineering (NCRAE),organized by Sanjeevan Engineering & Technology Institute,Panhala,ISBN:978-93-82062-37-0,22-23 June 2012

Publications by Dr.M.J.Pawar

1. M. J. Pawar, A. Patnaik, S. K. Biswas, U. Pandel, I. K. Bhat, S. Chatterjee, A. K. Mukhopadhyay, R. Banerjee, B. P. Babu, Comparison of ballistic performances of Al2O3 and AlN ceramics. International Journal of Impact Engineering 2016: 98, 42-51. 2. M. J. Pawar, Amar Patnaik, Ravindra Nagar, Mechanical and Thermo-Mechanical Analysis Based Numerical Simulation of Granite Powder Filled Polymer Composites for Wind Turbine Blade. Fibers and Polymers 2016: 17, 1078-1089. 3. M. J. Pawar, Amar Patnaik, Ravindra Nagar, Numerical Simulation and Experimental Validation of Granite Powder Filled Jute Epoxy Composite for Slurry Jet Erosive Wear, International Polymer Processing, 2016: 31, 37-50. 4. M. J. Pawar, Amar Patnaik, Ravindra Nagar, Investigation on Mechanical and Thermo-Mechanical Properties of Granite Powder Filled Treated Jute Fiber Reinforced Epoxy Composite, Polymer Composites 2015: DOI 10.1002/pc.23633. 5. M. J. Pawar, Amar Patnaik, Ravindra Nagar, Experimental Investigation and Numerical Simulation of Granite Powder Filled Polymer Composites for Wind Turbine Blade: A Comparative Analysis, Polymer Composites 2015: DOI 10.1002/pc.23700.

Department of Production Engineering

20th April 2017

6. M. J. Pawar, V. S. Jadhav, Finite Elemental Analysis of Influence of Shape and Profile of Cutting Edge of Twist Drill on Drilling Process, International Journal of Engineering and Advanced Technology 2012: 1, 57-61.

International Journal publications By Prof. S.M.Kadane:

1. S.M.Kadane, S.G.Bhatwadekar “Manufacturing Facility Layout Design and Optimisation Using Simulation”,(2011),International Journal of Advanced Manufacturing Systems, ISSN : 2229-5860, Volume 2, pp.59-65 2. V.M.Patil, S.M.Kadane, S.G.Bhatwadekar “Value Stream Mapping : Simulation Approach”, (2014), International Journal of Emerging Technologies and Applications in Engineering, Technology & Sciences (IJ-ETA-ETS), ISSN: 0974-3588, , pp.38-43 3. Prof. Sandeep M. Kadane, Prof. Bhushan S. Kamble , Reutilization of Bayer Red Mud as Moulding Material in Green Sand Casting Process-An Experimental Study ,International Journal of Scientific Research in Science, Engineering and Technology , Volume 2 ,Issue 4 ,Print ISSN : 2395-1990 ,Online ISSN : 2394-4099, PP: 295-301, , [July-August 2016], Impact Factor: 3.632 4. Prof. Sandeep M. Kadane, Prof. Bhushan S. Kamble , Design of Gating System, Metal Flow and Solidification for a Die Casting Component Using Virtual Simulation Technique, International Research Journal of Engineering and Technology [IRJET], Volume 3 Issue 6, PP: 1690-1695, e-ISSN: 2395 -0056, [June-2016] , Impact factor: 4.45 5. S.M.Kadane, M.M.Moog “Enhancement of Machining Properties using laser beam Techinique” National Conference on Recent Trends in Manufacturing 2006 KIT,s College of Engg. Kolhapur. 6. S.M.Kadane, S.S.Shinde, “A Synergetic Design Approach for Safety and Reliability in M.H.S.” National Conference on Recent Advances in Product and Process Design, organized by R.I.T. Sakharale on 21st -22nd March 2009 7. S.M.Kadane, M.M.Moog, “Control of IC Engine using Micro-Hybrid Technology.”National Conference on Advances in Design and Manufacturing, organized by TKIT,Warnanagar on 27th-28th Feb 2010 8. S.M.Kadane, .G.Bhatwadekar, “Design and Optimisation of Facility Layout”, National Conference on Advances in Manufacturing Engineering, organized by Manipal Institute of Technology, Manipal, Karnataka on 3rd -5th Jan 2011

International Conference publications by Prof.P.P.Powar

1. A.M.Mane, P.P.Powar, “Design for manufacturing and assembly of multispindle SPM”, ICRDME 2008, SUS College of Engineering & Tech. Tangori, Mohali (Punjab) 2. “A review on cutting forces in hard turning of AISI 4340 while Turning” 3rd International Conference on Production and Industrial Engineering Dr.B.R.Ambedkar NIT Jalandhar (India), Prof.P. P.Powar, 29-31st March 2013 3. “Application of Lean Tools for Productivity Improvement In A Small Scale Manufacturing Industry”, International Conference on “Science and Technology (ICST-2K14-ME-250),Prof.P.P.Powar, Mr.Umesh.K.Jotkar, Feb.2014 4. S.G.bhatwadekar, P.P.Powar, “Design for manufacturing and assembly applied to a multi spindle drilling SPM for productivity improvement”, National conference on recent advances in Mechanical Engg.”, National Engg. College, Kovilpatti, T.N., India. 5. Vidyadhar Gosavi, Prashant Powar, “Hot sand cooling problems in foundry”, NCRTM 2006, KIT’s College of Engg., Kolhapur. 6. S.S.Kadam, P.P.Powar, A.K.Madhale, “Experimental study of lubrication on surface finish of burnished component- TAGUCHI METHOD”, NCRTM 2006, KIT’s college of engg., Kolhapur. 7. P.P.Powar, S.B.Dinde, “Use of Mechatronics in Automobile Engg.”, National Conference in Mechanical Engg. 2005, Jamiya Miliya Islamiya University, New Delhi. 8. “Effect of Minimum Quantity Lubrication on turning of AISI 4340”, in National Conference on Emerging Trends in Engineering Technology & Architecture, at DYPCOEK , Prof.P.P.Powar, Mr.Asif A. Patel, 25th Jan.2014

Publications by Prof. S. B. Sangale:

1. Kashid D.V.1, S.G. Bhatwadekar2,S.B. Sangale3, P.R. kubade4, Investigations of Effect of Process Parameters on Material Removal Rate In Wire-cut electrical discharge Machinig of steel Grade EN 9, International Journal of Emerging Engineering Research and Technology(IJEERT) Volume. 2, Issue.1, pp.01-04,

Department of Production Engineering

20th April 2017

2. S Takalkar Atul, Shantanu S Bhat, Shubham S Chavan, Swapnil B Kamble, Arpit P Kulkarni, Sandesh B Sangale, “Finite Element Analysis of Composite Overwrapped Pressure Vessel for Hydrogen Storage”, 2016 Intl. Conference on Advances in Computing, Communications and Informatics (ICACCI), Sept. 21-24, 2016, Jaipur, India, 978-1-5090-2028-7/16/$31.00 @2016 IEEE. 3. Patil. A. T, Pise S. M, Bhatwadekar S. G, Sangale S. B, Various Flexible Fixturing Systems in Manufacturing-A Review, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 4, Issue 9, September 2015,ISSN (Online): 2319-8753, ISSN (Print): 2347-6710 4. Patil. A. T, Pise S. M, Bhatwadekar S. G, Sangale S. B, Part Family Based Setup Time Optimization and Achieving Quick Setup Changeover Using Adaptive Fixturing, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 5, Issue 5, May 2016,ISSN (Online): 2319-8753, ISSN (Print): 2347-6710 5. S. M. Pise, S. S. Mane, S. B. Sangale, Takalkar Atul S., “Impact of Value Additional Training Programs on Enhancing Employability”, National Conference on Impact of Assessment and Accreditation on Higher Professional Institutes, KIT’s College of Engineerig, Kolhapur.

Publications by Prof.G.R.Kulkarni

1. Porlkar Sagar, Sudhir Bhatwadekar, Kulkarni G R, (March 2017), Design, analysis and optimization of brake disc made of composite material for a motor cycle, International Journal of Research Publications in Engineering and Technology [IJRPET],VOLUME 3, ISSUE 3, March-2017.

Publications by Prof. B. S. Kamble

1. Bhushan S. Kamble1 , Analysis of Different Sand Casting Defects in a Medium Scale Foundry Industry - A Review, International Journal of Innovative Research in Science, Engineering and Technology , Vol. 5, Issue 2, ISSN[Online]: 2319-8753, DOI:10.15680/IJIRSET.2015.0502017, PP:1281-1288 ,[Feb2016], Impact factor: 5.442 2. Bhushan S. Kamble1, Pradnyesh V. Kadam2, Optimized Design of Risering System for Casted Component by Using Web Based Online Simulation E-Tool, International Research Journal of Engineering and Technology [IRJET], Volume 3 Issue 3, e-ISSN: 2395 -0056, PP:1118-1122 [March 2016], Impact factor: 4.45 3. Pradnyesh V. Kadam1, Bhushan S. Kamble2, Optimization of Feeder Design Using virtual Simulation Technique - A Case Study, International Research Journal of Engineering and Technology, Volume 03 Issue: 05 , e-ISSN: 2395- 0056, PP: 1334-1339. [May-2016] , Impact factor: 4.45 4. Prof. Bhushan S. Kamble , Prof. Sandeep M. Kadane, Reutilization of Bayer Red Mud as Moulding Material in Green Sand Casting Process-An Experimental Study ,International Journal of Scientific Research in Science, Engineering and Technology , Volume 2 ,Issue 4 ,Print ISSN : 2395-1990 ,Online ISSN : 2394-4099, PP: 295-301, , [July-August 2016], Impact Factor: 3.632 5. Prof. Bhushan S. Kamble , Prof. Sandeep M. Kadane, Design of Gating System, Metal Flow and Solidification for a Die Casting Component Using Virtual Simulation Technique, International Research Journal of Engineering and Technology [IRJET], Volume 3 Issue 6, PP: 1690-1695, e-ISSN: 2395 -0056, [June-2016] , Impact factor: 4.45 6. Bhushan Shankar Kamble1, Sudhir Baburao Mahadik2, Ganesh Raosaheb Dhaware2, Kapil Ganesh Mehta2, Dhanaji Ananda Gundap2, Optimization & Experimental Validation of Feeding System for Steel Casting Using Traditional and Simulation Technique- A Case Study, International Research Journal of Engineering and Technology,Volume: 03 Issue: 06, [June-2016] , PP: 1684-1689, e-ISSN: 2395 -0056, Impact factor: 4.45 7. Prof.Bhushan Shankar Kamble,Mr. Shubham Sanjay Sorate,Ms.Priya Umesh Kanase, Prof.Mahesh Sadashiv Sawant, Casting Simulation of Bearing Housing Using Web based Software and SQC techniques for Minimal Defect, International Journal of Advanced Engineering and Global Technology ISSN No: 2309-4893, Vol-05, Issue-02, PP: 1557-1564, March 2017., 8. Prof.Bhushan Shankar Kamble,Mr. Shubham Sanjay Sorate,Ms.Priya Umesh Kanase, Prof.Mahesh Sadashiv Sawant, Effective use of Casting simulation for improving Bearing Housing Casting’s Yield, International Journal of Scientific Research in Science, Engineering and Technology ,Volume 3 ,Issue 2, Print ISSN: 2395-1990, PP:16-26, March-April-2017, Impact factor: 3.7 9. Bhushan S. Kamble ,Optimizing the use of Polyethylene Teraphthalate in blow molded packaged bottles using value engineering 1st International conference on value engineering organizd by Dept.of Industrial engg and management and INVEST SZC at Dayananda Sagar College of Engineering, Bangalore-78 on 3rd-5th March 2017.

Department of Production Engineering

20th April 2017

Publications by Prof. S.J.Shah

1. Shah S.J., National conference on Emerging Trends in Engg. Tech. and Architecture (NCETETA – 2012), Advance manufacturing technology Low Cost Automation, Jan – 2012, ISBN 978-81-920561-1-1 2. Shailesh J. Shaha, Vivek V. Yadav, Quality Analysis Of Automotive Casting For Productivity Improvement By Minimizing Rejection, International Journal of Mechanical And Production Engineering, ISSN: 2320-2092, Volume- 4, Issue-6, Jun.-2016

Publications by Prof. A. S. Takalkar

1. Goutham Thampan K, Atul Takalkar S, Karthick Chandar, C S Bade, Krishna Srinivas “Design and simulation of starter motor casing using multi stage metal forming”, “NAFEMS World Congress 2015,” California, USA. 2. Takalkar Atul S, Lenin Babu M C, “ Thermal-Electro-Mechanical Simulation of a Copper (OHFC) Electric Contact with COMSOL 4.3b Multiphysic Software”, National conference on science, engineering and technology-NCSET 14. 3. Takalkar Atul S, Lenin Babu M C, Goutham Thampan K, J.M. Koteswara Rao, Krishna Srinivas, “Influence of process parameters on thickness variation of multistage deep drawing process”, Indian National Conference on Applied Mechanics 2015, IIT Delhi. 4. Karthick Chandar K, Goutham Thampan K, Takalkar Atul S, Chalam S Bade, Krishna Srinivas, “Development of improved tooling for drawing of solenoid casing using LS-DYNA simulation”, Indian National Conference on Applied Mechanics 2015, IIT Delhi. 5. Goutham Thampan K, Takalkar Atul S, Karthick Chandar K,Chalam S Bade, Krishna Srinivas, “Design and simulation of hydroforming of tubular component using LS-DYNA simulation”, Indian National Conference on Applied Mechanics 2015, IIT Delhi. 6. Atul Takalkar, J.M. Koteswara Rao, Lenin Babu M C, “Numerical Simulation For Predicting Failure In Deep Drawing Process Using Forming Limit Diagram (Fld)”, International Journal of Advances in Mechanical and Civil Engineering, ISSN: 2394-2827 Volume-2, Issue-4, Aug.-2015. 7. S. M. Pise, S. S. Mane, S. B. Sangale, Takalkar Atul S., “Impact of Value Additional Training Programs on Enhancing Employability”, National Conference on Impact of Assessment and Accreditation on Higher Professional Institutes, KIT’s College of Engineerig, Kolhapur.

Publications by Prof. Kubade

1. ProF. P. R. Kubade ,Fatigue life estimation of pressure reducing valve diaphragm , ,IJEAT, 22nd Feb.2015 2. Prof.P.R.Kubade Parametric Study and Optimization of WEDM Parameters for Titanium diboride TiB2, International Research Journal of Engineering and Technology (IRJET), Volume: 02 Issue: 04 | July-2015 3. Prof.P.R.Kubade Current Research Trends in Modification /Interaction of Halloysite Nanotube Filled Polymer Blends and Its Composites: A Review, International Journal of Science and Research (IJSR) ISSN (Online): 2319-7064 Index Copernicus Value (2013): 6.14 | Impact Factor (2014): 5.611, Volume 4 Issue 12, December 2015 4. Prof.P.R.Kubade Android Phone controlled Bluetooth Robot, International Research Journal of Engineering and Technology (IRJET), Volume 3 Issue 4

Publications by Prof. H.M.Thakur

1. Prof.H.M.Thakur,Prof.S.G.Bhatwadekar ,A literature review of facility planning and plant layout, International journal of engineering sciences and research technology, 16th March 2015 2. Prof. H. M. Thakur ,Optimization of sheet thickness for CRDA sheet metal panel in storage rack by experimental analysis of deflection under static load, International Journal of Innovative Research in Science, Engineering and Technology ,Volume 5 Issue 7, ISSN:2319-8753 , Jul-16 3. Dhairyashil A. Naik H.M. Thakur, Design And Analysis Of An Automated Seeder For Small Scale Sowing Applications For Tray Plantation Method, International Conference on Emerging Trends in Engineering, Technology and Architecture at DYPCET Kolhapur, 11th March 2017

Publications by Prof. Ashish T.Patil

Department of Production Engineering

20th April 2017

1. Patil. A. T, Pise S. M, Bhatwadekar S. G, Sangale S. B, Various Flexible Fixturing Systems in Manufacturing-A Review, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 4, Issue 9, September 2015,ISSN (Online): 2319-8753, ISSN (Print): 2347-6710 2. Patil. A. T, Pise S. M, Bhatwadekar S. G, Sangale S. B, Part Family Based Setup Time Optimization and Achieving Quick Setup Changeover Using Adaptive Fixturing, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 5, Issue 5, May 2016,ISSN (Online): 2319-8753, ISSN (Print): 2347-6710 3. Patil. A. T, Pise S. M, Setup Time Optimization During Manufacturing of Part Family Using Adaptive Fixturing, National Conference on Recent Trends in Mechanical Engineering,NCRTME-2016, WCE, Sangli 4-5 July,2016 4. Patil. A. T, Gawali B.S, Group buying: Destination India, National Conference on Exhibited Models of Project Innovations and Research in Engineering, NC-EMPIRE-2014, SGBGI, Miraj 28 Feb-1 March,2016

Publications by Prof. Tushar Y.Kale

1. Mr.Kale Tushar Y., Dr. S. R. Mahajan ,"The techno-economical analysis of battery operated vehicle. "Recent practices in conventional and non-conventional energy resources."2013. ISBN-978-93-5097-485-8. 2. Mr. Kale Tushar Y, Prof. S. N. Jalwadi,"Design and optimization of special purpose machine for Horizontal Drilling and Tapping by finite element analysis". RIT NConPG-16 MD222.